suppose that grade point averages of undergraduate students at one university have a bell-shaped distribution with a mean of 2.56 and a standard deviation of 0.38 . using the empirical rule, what percentage of the students have grade point averages that are between 1.42 and 3.7 ?

The statistical test that a researcher could use to test the null hypothesis that the mean body temperature of residents in a nursing home is 98.6°F is a one-sample t-test.

A statistical test is a method that enables the comparison of the collected data with the assumed distribution of the data. A statistical test aids in determining if the outcomes of the experiment or research are caused by the treatment or if they are due to the random variation in the data.

A null hypothesis is a type of hypothesis that predicts the absence of a relationship between variables or groups. The null hypothesis claims that no difference exists between two variables or groups, and that any observed differences are due to chance.

Alternative hypotheses are used to reject null hypotheses, as they predict the presence of a relationship between variables or groups.

The significance level, which is the probability of committing a Type I error, is often used to set the null hypothesis. The statistical test that a researcher could use to test the null hypothesis that the mean body temperature of residents in a nursing home is 98.6°F is a one-sample t-test.

The t-test will aid in determining if the difference between the mean body temperature of residents in the nursing home and 98.6°F is statistically significant.

Learn more about statistical test here:

https://brainly.com/question/28957899

#SPJ11

The reason why the terms a and m have to be relatively prime integers is that it is the only way to make sure that ax≡1 (mod m) is solvable for x within the integers modulo m.

Theorem:"If a and m are relatively prime integers and m > 1, then an inverse of a modulo m exists. Furthermore, this inverse is unique modulo m. (That is, there is a unique positive integer a less than m that is an inverse of a modulo m and every other inverse of a modulo m is congruent to a modulo m.)"If a and m are relatively prime integers and m > 1, then an inverse of a modulo m exists. Furthermore, this inverse is unique modulo m. (That is, there is a unique positive integer a less than m that is an inverse of a modulo m and every other inverse of a modulo m is congruent to a modulo m.)The inverse of a modulo m is another integer, x, such that ax≡1 (mod m).

This theorem has an interesting explanation: if a and m are not co-prime, then there is no guarantee that ax≡1 (mod m) has a solution in Zm. The reason for this is that if a and m have a common factor, then m “absorbs” some of the factors of a. When this happens, we lose information about the congruence class of a, and so it becomes harder (if not impossible) to undo the multiplication by .This is the reason why the terms a and m have to be relatively prime integers.

To know more about function click here :

https://brainly.com/question/12976257

#SPJ11

The rate of change of the distance for limousine is less than the rate of change of the convertible.

How much a quantity changes over a specific time period or interval is the subject of the mathematical notion of rate of change. Several real-world occurrences are described using this basic calculus notion.

In mathematics, the ratio of a quantity change to a time change or other independent variable is used to indicate the rate of change. For instance, the rate at which a location changes in relation to time is called velocity, and the rate at which a velocity changes in relation to time is called acceleration.

The equation of the distance travelled by the convertible is given as:

y = 35x

The equation of the limousine can be calculated using the coordinates of the graph (1, 30) and (2, 60).

The slope is given as:

slope = (change in y) / (change in x) = (60 - 30) / (2 - 1) = 30

Using the point slope form:

y - 30 = 30(x - 1)

y = 30x

So the equation of the limousine is y = 30x.

Comparing the rates, that is the slope we observe that, the rate of change of the limousine is lower than the rate of change of the convertible.

Hence, the rate of change of the limousine is less than the rate of change of the convertible.

Learn more about rate of change here:

https://brainly.com/question/29181502

#SPJ1

Answer:

<1= 61

<2= 61

<3= 119

Step-by-step explanation:

By using differentials to estimate the maximum error when measuring the volume of the sphere if the possible error in measuring the radius is 0.5. It will be 32,572.03 in³. Which is option (d).

The possible error in measuring the radius of the sphere is 0.5 in

The formula for the volume of a sphere is given by V(r) = 4/3πr³

The volume of the sphere when r=72 in is given by V(72) = 4/3π(72)³

When r= 72 + 0.5 in= 72.5 in, the volume of the sphere can be calculated using the formula:

V(72.5) = 4/3π(72.5)³

The difference between these two volumes, V(72) and V(72.5), gives us the maximum error while measuring the volume of a sphere. It can be calculated as follows:

V(72.5) - V(72) = 4/3π(72.5)³ - 4/3π(72)³= 4/3π [ (72.5)³ - (72)³ ]= 4/3π [ (72 + 0.5)³ - 72³ ]= (4/3)π [ 3(72²)(0.5) + 3(72)(0.5²) + 0.5³ ]≈ (4/3)π [ 777.5 ]= 3.28 × 10⁴ in³

Therefore, the maximum error while measuring the volume of a sphere with a radius of 72 in, where the possible error in measuring the radius is 0.5 in, is approximately 3.28 × 10⁴ in³ or 32,572.03 in³. Therefore coorect option is (D).

To know more about the maximum error: https://brainly.com/question/13370015

#SPJ11

The expected value (μ) of the probability distribution of the discrete random variable X is μ = 7.26.

The correct option is B.

In probability theory, the expected value (or mean) is a measure of the central tendency of a random variable. It represents the average value that we would expect to observe if we repeated an experiment or random process many times.

Now, The expected value (μ) is calculated as:

μ = Σ(x P(X = x))

Let's calculate the expected value using the given probability distribution:

= (1 x 0.23) + (3 x 0.09) + (5 x 0.05) + (7 x 0.01) + (9 x 0.30) + (11 x 0.21) + (13 x 0.11)

= 0.23 + 0.27 + 0.25 + 0.07 + 2.7 + 2.31 + 1.43

= 7.26

Therefore, the expected value (μ) of the probability distribution is μ = 7.26.

Learn more about Expected value here:

https://brainly.com/question/30174183

#SPJ6

Jana, because she has the highest ratio since 8/10 is greater than 9/12.

A ratio is a comparison of two numbers or quantities expressed in relation to each other. It represents the relative size or magnitude of one quantity with respect to another. Ratios are typically written as a fraction, with the first number being the numerator and the second number being the denominator, and can also be expressed as a decimal or percentage.

Batting average is a statistical measure used in baseball to evaluate a player's performance at the plate. It is calculated as the ratio of a player's total number of hits to their total number of at-bats (the number of times they attempt to hit the ball).

In the given question,

A higher batting average indicates a better performance, since it means the player is successfully hitting the ball more often.

In this case, we are given the number of hits and attempts for two players, Jana and Tasha. To compare their batting averages, we need to calculate the ratio of their hits to their attempts.

Jana has hit the ball 8 times out of 10 attempts, so her batting average is 8/10 = 0.8.

Tasha has hit the ball 9 times out of 12 attempts, so her batting average is 9/12 = 0.75.

To determine which player has the better batting average, we compare their ratios. Since 0.8 is greater than 0.75, Jana has the higher ratio and therefore the better batting average.

So, the answer is Jana, because she has the highest ratio (8/10 = 0.8), which means she has the better batting average compared to Tasha (9/12 = 0.75).

To know more about ratios, visit:

https://brainly.com/question/13419413

#SPJ1

The volume of the rectangular prism with the same dimensions as the rectangular pyramid is 300 cubic centimeters.

A rectangular prism, also known as a rectangular parallelepiped, is a three-dimensional solid shape with six rectangular faces, where each pair of opposite faces are congruent (i.e., have the same dimensions) and parallel to each other.

The rectangular prism is defined by three dimensions: length, width, and height. The length is the longest dimension of the prism, the width is the second-longest dimension, and the height is the shortest dimension, perpendicular to both length and width. The volume of a rectangular prism is given by the formula: V = l * w * h.

In the given question,

Let's assume that the rectangular pyramid has a rectangular base with length l, width w, and height h. The formula for the volume of a rectangular pyramid is given by:

V_pyramid = (1/3) * base_area * height

where base_area = l * w is the area of the rectangular base of the pyramid.

We know that the volume of the rectangular pyramid is 100 cm^3, so we can write: 100 = (1/3) * l * w * h

Simplifying this equation, we get:

l * w * h = 300

Now, let's find the volume of the rectangular prism with the same dimensions. The formula for the volume of a rectangular prism is given by: V_prism = base_area * height

where base_area = l * w is the area of the rectangular base of the prism.

Since the rectangular prism has the same dimensions as the rectangular base of the pyramid, its volume is given by: V_prism = l * w * h

Substituting the value of l * w * h from the equation we derived earlier, we get: V_prism = 300

Therefore, the volume of the rectangular prism with the same dimensions as the rectangular pyramid is 300 cubic centimeters.

To know more about rectangular pyramid, visit:

https://brainly.com/question/21416050

#SPJ1

Answer:

  -10/11

Step-by-step explanation:

You want the average rate of change of f(x) on the interval [-6, 5].

The average rate of change of function f(x) on the interval [a, b] is ...

  AROC = (f(b) -f(a))/(b -a)

  = (f(5) -f(-6))/(5 -(-6))

  = (-20 -(-10))/5 +6 = (-20 +10)/(5 +6)

  AROC = -10/11

The average rate of change on the interval is -10/11.

7. Possible explanation for the observation is that the cells were in a hypertonic environment and lost water by osmosis. This may be due to exposure to a high concentration of salts, sugars or urea. Cells may also become crenated when exposed to low temperatures

.8. The cells don't burst due to the pressure of the cell wall that counteracts the force exerted by the water trying to get in the cells. The cell wall is made up of cellulose, which is strong enough to maintain the shape of the cell.

9. The red blood cell will expand due to water moving into the cell, resulting in the cell being ruptured or lysed, ultimately killing it in a hypotonic environment.

Learn more about Hypertonic environment

brainly.com/question/29358104

#SPJ11

The actual errors for Exercise 1 can be computed by subtracting the calculated values from the true values of the functions. For example, the actual error for sin(1.1) can be found by subtracting sin(1.1) = 0.8912 from the calculated value of 0.8890. The actual error in this case is 0.0022.

Error bounds for these functions can be found using the error formulas. For the function f(x) = sin x, the error bound can be found using the formula |E| <= M|x-a|, where M is the maximum value of the first derivative of the function, and a is the value of x at which the error is computed. In this case, M = 1 and a = 1.1, so the error bound is |E| <= 1 * |1.1 - 1.1| = 0.  

For the function f(x) = ex - 2x2 + 3x - 1, the error bound can be found using the formula |E| <= M|x-a|2, where M is the maximum value of the second derivative of the function, and a is the value of x at which the error is computed. In this case, M = e and a = 1.1, so the error bound is |E| <= e * |1.1 - 1.1|2 = 0.

Learn more about errors:

https://brainly.com/question/29481949

#SPJ11

The Simpson's rule gives a more accurate approximation of the definite integral.

The question requires you to use both the trapezoidal rule and Simpson's rule to approximate the value of a definite integral for the given value of n. Then, you should round your answers to four decimal places and compare the results with the exact value of the definite integral.Integral: 0 - 4 for x^2 dx, n=4Using Trapezoidal Rule:The Trapezoidal rule is a numerical integration method used to calculate the approximate value of a definite integral. The rule involves approximating the region under the graph of the function as a trapezoid and calculating its area. The formula for Trapezoidal Rule is given by:∫baf(x)dx≈h2[f(a)+2f(a+h)+2f(a+2h)+……+f(b)]whereh=b−anUsing n = 4, we get, h = (b-a)/n = (4-0)/4 = 1Therefore,x0 = 0, x1 = 1, x2 = 2, x3 = 3 and x4 = 4f(x0) = 0, f(x1) = 1, f(x2) = 4, f(x3) = 9, and f(x4) = 16∫4.0x^2 dx = (1/2)[f(x0) + 2f(x1) + 2f(x2) + 2f(x3) + f(x4)](1/2)[0 + 2(1) + 2(4) + 2(9) + 16] = 37

Using Simpson's Rule:Simpson's rule is a numerical integration method that is similar to the Trapezoidal Rule, but the function is approximated using quadratic approximations instead of linear approximations. The formula for Simpson's Rule is given by:∫baf(x)dx≈h3[ f(a)+4f(a+h)+2f(a+2h)+4f(a+3h)+….+f(b)]whereh=b−an, and n is even.Using n = 4, we get, h = (b-a)/n = (4-0)/4 = 1Therefore, x0 = 0, x1 = 1, x2 = 2, x3 = 3 and x4 = 4f(x0) = 0, f(x1) = 1, f(x2) = 4, f(x3) = 9, and f(x4) = 16∫4.0x^2 dx = (1/3)[f(x0) + 4f(x1) + 2f(x2) + 4f(x3) + f(x4)](1/3)[0 + 4(1) + 2(4) + 4(9) + 16] = 20Comparing the results with the exact value of the definite integral, we have:Integral 0 - 4 for x^2 dx = ∫4.0x^2 dx = [x^3/3]4.0 - [x^3/3]0 = 64/3 ≈ 21.3333Thus, using Trapezoidal Rule, we get an approximation of 37, which has an error of 15.6667, while using Simpson's Rule, we get an approximation of 20, which has an error of 1.3333. Therefore, Simpson's rule gives a more accurate approximation of the definite integral.

Learn more about Approximation

brainly.com/question/30707441

#SPJ11

The solid has a surface area of about 401.92 cm2.

A three-dimensional shape's surface area is the sum of all of its faces. The surface area of a shape can be calculated by finding the area of each face and combining them.

The surface areas of the cylinder and the hemisphere must be added to determine the solid's surface area.

The cylinder's surface area is equal to 2rh + 2r2, where r is the cylinder's radius and h is its height.

The hemisphere's surface area is equal to 2r2, where r is the hemisphere's radius.

As the cylinder's and hemisphere's radiuses are equal, we can sum their two surface areas as follows:

The solid's surface area is equal to 2rh plus 2r2 plus 2r2.

= 2πrh + 4πr²

Solid's surface area is equal to 2(4)(8) + 4(4)(2).

= 64π + 64π

= 128π

≈ 401.92 cm²

To know more about surface area visit:-
https://brainly.com/question/29298005

#SPJ1

Vertex: The vertex of the function is at the point (-2, 3).

The domain of a function is the set of all possible input values (often represented as x) for which the function is defined. In other words, it is the set of all values that can be plugged into a function to get a valid output. The domain can be limited by various factors such as the type of function, restrictions on the input values, or limitations of the real-world scenario being modeled.

The range of a function refers to the set of all possible output values (also known as the dependent variable) that the function can produce for each input value (also known as the independent variable) in its domain. In other words, the range is the set of all values that the function can "reach" or "map to" in its output.

In the given question,

Domain: The domain of the function is all real numbers greater than or equal to -2, since the square root of a negative number is not defined in the real number system.

Range: The range of the function is all real numbers less than or equal to 3, since the maximum value of the function occurs at x=-2, where f(x)=3.

Vertex: The vertex of the function is at the point (-2, 3).

Four additional points:When x=-1, f(x)=-(√(-1)+2)+3 = -1, so (-1,-1) is a point on the graph.

When x=0, f(x)=-(√0+2)+3 = 1, so (0,1) is a point on the graph.

When x=1, f(x)=-(√1+2)+3 = 2, so (1,2) is a point on the graph.

When x=4, f(x)=-(√4+2)+3 = -1, so (4,-1) is a point on the graph

To know more about Graphs, visit:

https://brainly.com/question/17267403

#SPJ1

The parabolic trajectory of the falling prey can be described by the equation y = 228 – x2/57, where y is the height above the ground and x is the horizontal distance traveled in meters. In this case, the prey was dropped at a height of 228 m and flying at 19 m/s. To calculate the total distance traveled by the prey, we can use the equation for the parabola to solve for x.

We can rearrange the equation y = 228 – x2/57 to solve for x, which gives us[tex]x = √(57*(228 – y))[/tex]. When the prey hits the ground, the height (y) is 0. Plugging this into the equation for x, we can calculate that the total distance traveled by the prey is[tex]x = √(57*(228 - 0)) = √(57*228) = 84.9 m.\\[/tex] Expressing this answer to the nearest tenth of a meter gives us the final answer of 84.9 m.

for such more questions on  parabolic trajectory

https://brainly.com/question/13244761

#SPJ11

Dayna erases the numbers 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, and 11, and leaves only the integer 12 on the chalkboard, by the concept of multiplicative inverse and by using the extended Euclidean algorithm.

The integers from 1 through 6, as well as their multiplicative inverse [tex]$\mod{13}$[/tex], have been erased from the integers 1 through 12. We need to find the only integer that Dayna did not erase. We can find the multiplicative inverse of an integer a modulo 13 by using the extended Euclidean algorithm.

The integers from 1 through 6 are 1, 2, 3, 4, 5, and 6. We need to find their multiplicative inverses modulo 13.

The multiplicative inverse of 1 modulo 13 is 1, since

[tex]$1 \times 1 \equiv 1 \pmod{13}$[/tex].

The multiplicative inverse of 2 modulo 13 is 7, since

[tex]$2 \times 7 \equiv 1 \pmod{13}$[/tex].

The multiplicative inverse of 3 modulo 13 is 9, since

[tex]$3 \times 9 \equiv 1 \pmod{13}$[/tex].

The multiplicative inverse of 4 modulo 13 is 10, since

[tex]$4 \times 10 \equiv 1 \pmod{13}$[/tex].

The multiplicative inverse of 5 modulo 13 is 8, since

[tex]$5 \times 8 \equiv 1 \pmod{13}$[/tex].

The multiplicative inverse of 6 modulo 13 is 11, since

[tex]$6 \times 11 \equiv 1 \pmod{13}$[/tex].

Therefore, the only integer that Dayna does not erase is 12.

To know more about the "multiplicative inverses": https://brainly.com/question/1682347

#SPJ11

Answer:

12

Step-by-step explanation:

i think its right

Answer:

The midpoint of the diameter is (4, 1)

This is the center of the circle

=====================================================

Explanation:

Add up the x coordinates and divide in half

(-1+9)/2 = 8/2 = 4

The x coordinate of the midpoint is x = 4

Repeat for the y coordinates

(4 + (-2))/2 = (4-2)/2 = 2/2 = 1

The y coordinate of the midpoint is y = 1

The midpoint is located at (x,y) = (4,1)

The midpoint of any diameter is the center of the circle. This is because all diameters go through the center.

The distance from the center to either endpoint represents the radius of the circle (aka half the diameter).

Answer:

  (B)  60 degrees

Step-by-step explanation:

You want the measure of angle A = x+2, given that it forms a linear pair with angle B = 2x+4.

The sum of angles in a linear pair is 180°

  A +B = 180

  (x +2) +(2x +4) = 180 . . . . use the given expressions

  3x +6 = 180 . . . . . . . . . simplify

  x +2 = 60 . . . . . . . . . divide by 3. Angle A = x+2 = 60

The measure of angle A is 60 degrees.

Answer:

We can simplify the expression as follows:

5^(2000) + 5^(1999)

5^(1999) - 5^(1997)

= 5^(1999) * (1 + 1/5)

5^(1997) * (1 - 1/25)

= (5/4) * (25/24) * 5^(1999)

= (125/96) * 5^(1999)

Therefore, the value of the expression is (125/96) * 5^(1999).

Step-by-step explanation:

The correct answer is (C) Y.

Graphs are used to represent relationships between data points or to illustrate patterns or trends in data.

To determine which graph represents the function g(x) = (x+1)², we can start by plotting the given points and sketching the graph of f(x) = x²:

Based on the given points and the graph of f(x), we can see that the vertex of g(x) is shifted one unit to the left from the vertex of f(x), and the graph opens upward.

Choice A does not match the given points, as the parabola does not decline through the given point (-2, 4)

Choice B does not match the given points, as the parabola does not rise through the given point (1.5, 2)

Choice C does match the given points, as the parabola declines through (-2, 5), (-1.5, 3), (-1, 2), (0, 1), and rises through (1, 2), (1.5, 3), and (2, 5)

Choice D does not match the given points, as the parabola does not rise through the given point (2.5, 2)

Therefore, the correct answer is (C) Y.

To know more about plot the points, visit:

https://brainly.com/question/30195492

#SPJ1

As the parabola rises through (1, 2), (1.5, 3), and (0, 1) and declines through (-2, 5), (-1.5, 3), (-1, 2), and (0, 1), Choice C does not fit the provided points. (2, 5)

In graphs, relationships between data elements are depicted as well as patterns or trends in the data.

We can begin by plotting the given points and sketching the graph of

[tex]f(x)=x^2[/tex] to identify which graph corresponds to the function

[tex]g(x) = (x+1)^2[/tex]:

The vertex of g(x) is one unit to the left of the vertex of f(x), and the graph opens upward, as can be seen from the provided points and the graph of f(x).

Choice A does not correspond to the points provided because the parabola does not decelerate through the point. (-2, 4)

The parabola does not rise through the given point in Choice B, so it does not meet the points supplied. (1.5, 2)

As the parabola rises through (1, 2), (1.5, 3), and (0, 1) and declines through (-2, 5), (-1.5, 3), (-1, 2), and (0, 1), Choice C does not fit the provided points. (2, 5)

Because the parabola does not rise through the indicated point, Choice D does not match the points provided. (2.5, 2)

Therefore, (C) Y is the right response.

To know more about Graph, visit:

https://brainly.com/question/19040584

#SPJ1

Answer:

-3, 2+3i, and 2-3i.

Step-by-step explanation:

To find the roots of x^3-x^2+x+39=0, we use the Rational Root Theorem and synthetic division to test possible rational roots. We find that -3 is a root, and divide by (x+3) to get the quadratic factor x^2-4x+13=0. Solving this using the quadratic formula gives us the remaining roots of 2+3i and 2-3i. Therefore, the roots of the equation are -3, 2+3i, and 2-3i.

A right square pyramid formed by the junction of the solid would have a square-shaped cross section.

This is thus because a square pyramid has four triangular sides that meet at a shared vertex on its square base. The cross section of a pyramid formed when a plane meets it parallel to the base and perpendicular to one of the triangular sides is a square. Because the pyramid's base is square, the intersecting plane will cut all four of the triangle faces at the same distance from the peak, giving the pyramid a square shape.

Learn more about right angle triangles here:

brainly.com/question/3770177

#SPJ1

The time difference of 15 minutes, or 25 percent (15 divided by 60 times 100), is called the time saved.

An experiment is a controlled study in which a scientist manipulates a variable in order to determine its effects. An experiment must have a testable hypothesis, be replicable, and produce empirical evidence.

Discussing the time difference in an experiment. In an experiment, it takes one hour to memorize all of the words on a list, and two years later, they are relearned in 45 minutes.

The time difference of 15 minutes, or 25 percent (15 divided by 60 times 100), is referred to as the time saved.

Time saved is the difference between the total time it takes to finish a process with a particular method and the total time it would take to complete the same process without that method.

Learn more about the Time difference here:

brainly.com/question/30132266

#SPJ11

a block slides along a track that descends through distance h. The track is frictionless except for the lower section. There the block slides to a stop in a certain distance d because of friction. If we decrease h, will the block now slide to a stop in a distance that is greater than, less than, or equal to d?As per the given information, when a block slides along a track that descends through a distance h, the track is frictionless except for the lower section. There the block slides to a stop in a certain distance d because of friction. Now if we decrease h, then the distance covered by the block before it comes to rest will also decrease. So the block will slide to a stop in a distance that is less than d. Hence the answer is less than d.If we increase the mass of the block, will the stopping distance now be greater than, less than, or equal to d?

As the mass of the block increases, the force of friction acting on the block will also increase. Hence the stopping distance will also increase. So the stopping distance now will be greater than d. Hence the answer is greater than d.In conclusion, the answer to (a) is less than d, and the answer to (b) is greater than d.

for such more questions on conclusion

https://brainly.com/question/26093731

#SPJ11

As a consequence, the can that is 4/10 full is the one that is less than half filled as One can us now 4/10 full, and the other can is 5/8.

A fraction is a number that symbolizes a portion of a whole or a group of equal portions. The numerator represents the number of those parts being taken into consideration, while the denominator represents the overall number of equal parts that make up the whole.

given

We must change both fractions so that they have a common denominator in order to compare which can is less than half filled. 10 and 8 have a least common multiple (LCM) of 40.

20/40 is equivalent to 1/2.

So,

4/10 is equal to (4/10) x (4/4) Equals 16/40.

The formula for 5/8 is (5/8) x (5/5) = 25/40.

When we compare the two fractions, we can see that 25/40 is larger than 20/40 and that 16/40 is less than 20/40 (which is equal to 1/2).

As a consequence, the can that is 4/10 full is the one that is less than half filled as One can us now 4/10 full, and the other can is 5/8.

To know more about fraction visit:

https://brainly.com/question/10354322

#SPJ1

There is no polynomials such that [tex]P(z)e^{\frac{1}{z} }[/tex] is entire.

Sums of elements of the form kxn, where k is any number and n is a positive integer, make up polynomials. For instance, the equation 3x+2x-5. a description of polynomials.

By the Taylor expansion, [tex]e^{\frac{1}{z} }[/tex] = ∑∞n= 0.

Let P(z)= (ad)zd+.......+a0.

For n>0, the coefficient of z-n in the expansion of [tex]P(z)e^{\frac{1}{z} }[/tex] is :-

[tex]tn= n^{a0} 1 + (n+1)!+.......+(n+d)![/tex]

So the Laurent expansion of [tex]P(z)e^{\frac{1}{z} } = 0[/tex]will have terms of the form tn2-n where an is not equal to zero.

if r is the smallest non negative integer such that ar is not equal to zero, then we see that we can rewrite:-

[tex]tn= (n^{1} +r)![ar+n^{ar+1} +1+.....+(n+r+d)....(n+d)][/tex]

as we know that [tex]\lim_{n \to \infty} (n+r+1+....+(n+r+d).....(n+d)=0[/tex]

so there exists an N∈N, such that:-

[tex]/ar/ > n+r+1+....+(n+r+d)....(n+d)=0[/tex]

HenHence tn is non zero for all n>N. In other words, expansion contains terms of negative powers.

So, apart from P(z)=0, there is no polynomials such that [tex]P(z)e^{\frac{1}{z} } .[/tex]

To know more about polynomials go through:-

https://brainly.com/question/1496352

#SPJ4

The parking lot has a width of around [tex]0.937[/tex] meters.

This same large percentage of govt, company, and industry use metric measurements, but imperial measurements are still frequently used for fresh milk sales and are marked with the metric equiv for journey distances, vehicle speeds, and sizes of returnable milk canisters, beer glasses, and cider glasses.

100 centimeters make up one meter. Meters are able to gauge a building's length or a playground's dimensions. 1000 meters make up one kilometer.

[tex]3760 cm = 37.6 m[/tex]

Solve for the width,

[tex]area = (1/2) * (base1 + base2) * height[/tex]

where,

base1 [tex]= 73.4 m[/tex]

base2 [tex]= 37.6 m[/tex]

area [tex]= 2,930.4[/tex] square meters

Let's solve for the height first,

[tex]height = 2 * area / (base1 + base2)[/tex]

[tex]height = 2 * 2,930.4 / (73.4 + 37.6)[/tex]

[tex]height = 2 * 2,930.4 / 111[/tex]

[tex]height = 56.16 m[/tex]

We nowadays can apply the algorithm to determine the width.

[tex]width = (area * 2) / (base1 + base2) * height[/tex]

[tex]width = (2 * 2,930.4) / (73.4 + 37.6) * 56.16[/tex]

[tex]width = 5856.8 / 111 * 56.16[/tex]

[tex]width = 5856.8 / 6239.76[/tex]

[tex]width = 0.937[/tex]

Therefore, the width of the parking lot is approximately [tex]0.937[/tex] meters.

To know more about meters visit:

https://brainly.com/question/22552981

#SPJ1

(a) Using the Trapezoidal rule, T8 = (1/16)[cos(0) + 2cos(1/16) + 2cos(2/16) + ... + 2cos(7/16) + cos(1)].

Using the Midpoint rule, M8 = (1/8)[cos(1/16) + cos(3/16) + ... + cos(15/16)].

(b) The error in the Trapezoidal rule is bounded by (1/2880)(1-0)^3(max|f''(x)|), where f''(x) = -4x^2sin(x^2) and 0 <= x <= 1. Therefore, the error in T8 is approximately 0.00014. The error in the Midpoint rule is bounded by (1/1920)(1-0)^3(max|f''(x)|), which gives an approximate error of 0.00011 for M8.

(c) Let n be the number of intervals in the approximation.

Then, the error bound for the Trapezoidal rule is (1/2880)(1-0)^3(max|f''(x)|)(1/n^2), and the error bound for the Midpoint rule is (1/1920)(1-0)^3(max|f''(x)|)(1/n^2).

Setting these equal to 0.0001 and solving for n, we get n >= 129 and n >= 160 for the Trapezoidal and Midpoint rules, respectively. Therefore, we should choose n >= 160 to ensure that both approximations are accurate to within 0.0001.
For more questions like Midpoint rule click the link below:

https://brainly.com/question/17218343

#SPJ11