Someone HELP if the displacement is in the start and it ends in the same spot then would It be 0?

Answer:

The motorcycle daredevil does not sail across the 10-m wide pool filled with hungry crocodiles

Explanation:

The given parameters are;

The height of the ramp = 2.0 m-high

The angle of elevation of the ramp, θ = 20°

The width of the pool = 10 m

The speed with which he is going when the engine fails = 10.4 m/s

The rolling friction between the rubber tires, μ = 0.02

μ·g·cos(θ) = (1/2)·(a)

a = (μ·g·cos(θ))/(1/2)

Where;

a = The acceleration down the plane

∴ a = 0.02 × 9.81 × cos(20°)/(1/2) ≈ 0.369

The length of the ramp, l = 2.0 m/(sin(20°)) ≈ 5.8476088 m

The velocity at the end of the ramp, v² = u² - 2·a·l

∴ v² = 10.4² - 2×(0.369 + 9.81 × sin(20°))×5.8476088 ≈ 64.60446471

v ≈ √(64.60446471) ≈ 8.04

∴ The velocity at the top of the ramp, v ≈ 8.04 m/s

The time it takes the motorcycle to reach ground level from the top of the ramp, t, is given as follows;

h = h₀ + u·t + (1/2)·a·t²

h₀ = 2, u = 8.04×sin(20°), a = -9.81

When h = 0 (ground level), we have;

∴ h = 2+ 8.04×sin(20°)·t - (1/2)×9.81×t²

0 ≈ 2.75·t - 4.905·t² + 2

2.75·t - 4.905·t² + 2 = 0

By using a graphing calculator, we have, t = 0.978 or t = -0.42

At ground level, the time of flight, t ≈ 0.978 s

The horizontal distance the motorcycle travels, before landing, x = u × cos(θ) × t

∴ x = 8.04×cos(20 Degrees) × 0.978 = 7.3889

The horizontal distance the motorcycle travels, before landing, x ≈ 7.3889 m

Therefore, given that the horizontal distance the motorcycle travels in the air 7.3889 m < 10 m, therefore the motorcycle daredevil does not sail across the 10-m wide pool filled with hungry crocodiles

If i understand your question clearly, The best choice in most scenarios is  copper.

Why?

Its due to copper's high conductive properties, its abundance, its low price compared to its fellow metal conductors, its ductile property, thermal resistance and immunity to oxidation ( rusting ).

Though Silver surpasses copper in conductivity, copper is shown to be more notable than its fellow conductors.

The magnitude of the frictional force working on the box is 14 N.

According to Newtons's first law, an object will continue in its state of rest or state of uniform motion unless it is acted upon by an unbalanced force. This means that motion or acceleration is caused by an unbalanced force.

Since the box is moving at constant velocity, the frictional force on the box and the force that moves the box forward are exactly equal in magnitude but opposite in direction.

Learn more: https://brainly.com/question/9352088?

Answer:

It spreads diseases.

Explanation:

But when cooked food is kept on the place where uncooked meat or food was kept the germs spread to the cooked food also and as the cooked food cannot be washed it harms us as we directly consume it.

Answer:

Size of an object, and the distance between the objects.

When the mass of an object increases the force of gravity increases as well.

Explanation:

The magnitude of this force depends upon the mass of each object and the distance between the centers of the two objects. Mathematically, we say the force of gravity depends directly upon the masses of the objects and inversely upon the distance between the objects squared.

Answer:

6KW

Explanation:

The computation is shown below:

We know that

Work done= m ×g× h

Here

W= 300×10×10

= 30000 J

= 30 KJ

And

Power= Work done ÷time taken

 P = 30000 ÷ 5

= 6000W

= 6KW

The above represent the answer

Answer:

A. [tex]1.88\times 10^{-11}\,F[/tex].

Explanation:

By definition of Electric Capacitance, the capacitance of the system ([tex]C[/tex]), in farads, is described by the following formula:

[tex]C = \frac{q}{V}[/tex] (1)

Where:

[tex]q[/tex] - Electric charge, in coulombs.

[tex]V[/tex] - Voltage, in volts.

If we know that [tex]q = 9.4\times 10^{-10}\,C[/tex] and [tex]V = 50\,V[/tex], then the capacitance of the system is:

[tex]C = \frac{9.4\times 10^{-10}\,C}{50\,V}[/tex]

[tex]C = 1.88\times 10^{-11}\,F[/tex]

The correct answer is A.

Answer:

changing the force to point right is the correct answer :)

The direction of the force acting on the field should be changed to point towards the right.

An electric field is referred to as the region where the influence of charge is felt. Thus, the force acts in the direction of the electric field when the field is uniform.

Having said that, it follows that the direction of the force acting on the field should be changed to point towards the right.

Learn more about electric field:https://brainly.com/question/15800304

#SPJ9

Answer:

The ratio of the amplitudes of siren to dishwasher is 10.

Explanation:

loudness of dishwasher = 40 dB

loudness of siren = 60 dB

let the intensity of dishwasher is I an the intensity of siren is I'.

Use the formula of intensity and decibels.

[tex]dB = 10 log\frac{I}{I_o}\\\\40=10 log\frac{I}{I_o}\\\\4 = log\frac{I}{I_o}\\\\I = 10000 I_o[/tex]

And

[tex]60=10 log\frac{I'}{I_o}\\\\60 = log\frac{I'}{I_o}\\\\I' = 1000000 I_o[/tex]

The intensity if proportional to the amplitude.

[tex]\frac{A'}{A}=\sqrt\frac{1000000}{10000}\\\\\frac{A'}{A}= 10[/tex]

Answer:

Explanation:

PE = mgh where m is the mass in kg, g is the pull of gravity which is 9.8, and h is the height of the object above the point to which it could possibly fall, measured in meters. Plugging in:

PE = 10(9.8)(20) so

PE = 1960 J

This should be rounded to 1 sig fig according to the rules of sig fig and your numbers here, but I imagine you're not following them all that much. It should be 2000 J

Answer: hello options related to your question is missing attached below is the missing part of your question

answer: No charge of the length of the bonds expected because the rod did not touch the charge source ( option A )

Explanation:

When the Charge is first, Furthest away and second  and closest to the source charge. The spring like bonds can be said to have No charge of the length  of the bonds expected because the rod did not touch the charge source when Furthest away the bond with charge will be less effective

Answer:

8.829 Joules

Explanation:

The potential energy of an object, is the energy it posses (the energy stored within the object) by virtue of its relative elevation or height, position, state, or arrangement

The potential energy of an object raised to a given height, P.E. = m·g·h

Where;

m = The mass of the object

g = The acceleration due to gravity, a constant ≈ 9.81 m/s²

h = The present height of the object

For the potato sack having a mass, m = 2 kg, and raised to a height, h = 450 cm = 0.45 m, we have;

The potential energy given to the potato sack, by raising its height, P.E. is given as follows;

P.E. = 2 kg × 9.81 m/s² × 0.45 m = 8.829 Joules

The potential energy given to the potato sack, P.E. = 8.829 Joules

Answer:

The proton has the same charge as the neutron.

Explanation:

Because the proton has a positive charge whereas the neutron has no charge  at all.

Answer:

Protista

Explanation:

Taxonomy can be defined as the process of naming, classification and description of living organisms such as plants and animals. Thus, the biological classification of living organisms based on similarities or characteristics such as eyes, number of legs, etc., is generally referred to as taxonomy.

Basically, taxonomy helps scientist to have a good understanding and knowledge when studying various organisms.

Furthermore, the eight (8) biological classification (taxonomy) used for grouping and organizing organisms are; kingdom, domain, phylum, family, order, class, species and genus.

An organism that has only one cell, big and has a nucleus is most likely a member of Protista. Thus, a Protista such as euglena, paramecium, amoeba, etc., have a nucleus and are unicellular.

A unicellular organism refers to a living organism that possess a single-cell while a multicellular organism has many (multiple) cells.

Answer:

21 m

Explanation:

Since the displacement from the door is 2 m West, we have our vector as -2i. The vector representing 14.0 m South is -14.0j. The vector representing 25.0 m East is 25.0i. The vector representing 11.0 m North is 11.0j. And, the vector representing 2.0 m West is -2.0i.

So, to get our position vector at the other location, we add all the vectors together.

So, r = -2i + (-14.0j) + 25.0i + 11.0j - 2i

= -4i + 25.0i - 14.0j + 11.0j

= 21.0i -3j m

Now, if we assume the position vector for the door is at the origin, we have r₀ = 0i + 0j m

So, our displacement from the door is r - r₀ = 21.0i - 3.0j - (0i + 0j) =  21.0i - 3.0j

So, the magnitude of the resultant displacement |r - r₀| = √(21.0² + 3.0²)

= 3.0√(7.0² + 1)

= 3.0√(49 + 1)

= 3.0√50

= 3.0 × 7.0711

= 21.2

≅ 21 m to the nearest integer

Answer:

Thermal physics

Explanation:

Because it uses temperature

Answer:

In my opinion both are easier if you'll work hard on it...

Answer:

Explanation:

T = 2π √ (m/k)

T / 2π = √ (m/k)

T√k = 2π √m

(T√k) / 2π = √m

( (T√k) / 2π)^2 = m

m = ( (7.5√82.5) / 2π)^2

m = 117.66 Kg

Answer:

The amount of heat energy received at any location on the globe is a direct effect of Sun angle on climate, as the angle at which sunlight strikes Earth varies by location, time of day, and season due to Earth's orbit around the Sun and Earth's rotation around its tilted axis.

Answer:

The earth's climate system depends entirely on the sun for its energy. Solar radiation warms the atmosphere and is fundamental to atmospheric composition.

Explanation:

hope this helps :)

Answer:

They are temperature, atmospheric pressure, wind, humidity, precipitation, and cloudiness. Together, these components describe the weather at any given time.

Answer:

A. Endothermic reaction.

B. +150KJ.

C. 250KJ.

Explanation:

A. The graph represents endothermic reaction because the heat of the product is higher than the heat of the reactant.

B. Determination of the enthalpy change, ΔH for the reaction. This can be obtained as follow:

Heat of reactant (Hr) = 50KJ

Heat of product (Hp) = 200KJ

Enthalphy change (ΔH) =..?

Enthalphy change = Heat of product – Heat of reactant.

ΔH = Hp – Hr

ΔH = 200 – 50

ΔH = +150KJ

Therefore, the enthalphy change for the reaction is +150KJ

C. The activation energy for the reaction is the energy at the peak of the diagram.

From the diagram, the activation energy is 250KJ.

Complete Question

A flywheel in a motor is spinning at 510 rpm when a power failure suddenly occurs. The flywheel has mass 40.0 kg and diameter 75.0 cm . The power is off for 40.0 s , and during this time the flywheel slows down uniformly due to friction in its axle bearings. During the time the power is off, the flywheel makes 210 complete revolutions. At what rate is the flywheel spinning when the power comes back on(in rpm)? How long after the beginning of the power failure would it have taken the flywheel to stop if the power had not come back on, and how many revolutions would the wheel have made during this time?

Answer:

[tex]\theta=274rev[/tex]

Explanation:

From the question we are told that:

Angular velocity [tex]\omega=510rpm[/tex]

Mass [tex]m=40.kg[/tex]

Diameter d [tex]75=>0.75m[/tex]

Off Time [tex]t=40.0s[/tex]

Oscillation at Power off [tex]N=210[/tex]

Generally the equation for Angular displacement is mathematically given by

 [tex]\theta_{\infty}=\frac{w+w_0}{t}t[/tex]

 [tex]w=\frac{2*\theta_{\infty}}{t}-w_0[/tex]

 [tex]w=\frac{28210}{40*(\frac{1}{60})}-510[/tex]

 [tex]w=120rpm[/tex]

Generally the equation for Time to come to rest is mathematically given by

 [tex]t=(\frac{\omega_0}{\omega_0-\omega})t[/tex]

 [tex]t=(\frac{510}{510-120rpm})(40.0)(\frac{1}{60})[/tex]

 [tex]t=0.87min[/tex]

Therefore Angular displacement is

 [tex]\theta =(\frac{120+510}{2})0.87[/tex]

 [tex]\theta=274rev[/tex]

The component of the crate's weight that is parallel to the ramp is the only force that acts in the direction of the crate's displacement. This component has a magnitude of

F = mg sin(20.0°) = (15.0 kg) (9.81 m/s^2) sin(20.0°) ≈ 50.3 N

Then the work done by this force on the crate as it slides down the ramp is

W = F d = (50.3 N) (2.0 m) ≈ 101 J

The work-energy theorem says that the total work done on the crate is equal to the change in its kinetic energy. Since it starts at rest, its initial kinetic energy is 0, so

W = K = 1/2 mv ^2

Solve for v :

v = √(2W/m) = √(2 (101 J) / (2.0 m)) ≈ 10.0 m/s

Answer:

The ball and the wall experience the same force.

Explanation:

According to the third law of Newton, which states that "for every action, there is an equal and opposite reaction", this means that when an object 1 acts on object 2 with a certain force, object 2 also acts on object 1 with the same magnitude of force but in an opposite direction.

According to this question, a ball hits a wall with a certain force. This means that the wall will react on the ball with the same force magnitude, but in an opposite manner. Hence, the ball and the wall experience the same force.

Answer:

flowers

Explanation:

i'm really not sure but i have this gut feeling its flowers

answer:

Explanation:

the impulse-momentum theorem states that the change in momentum of an object equals the impulse applied to it. The impulse-momentum theorem is logically equivalent to Newton's second law of motion (the force law).

According to the impulse-momentum theorem, the amount of change in an object's momentum equal to the amount of force applied to the object over a certain amount of time. So, option B.

According to the impulse-momentum theorem, the impulse that is applied to an item is equal to the change in momentum.

It shows how an object's change in momentum depends on both the strength and duration of the applied forces.

Impulse is defined as the force acting for a short interval of time.

Impulse = F x t

The momentum of the object,

P = mv

So, the rate of change of momentum,

dP/dt = d(mv)/dt

dP/dt = mdv/t

dP/dt = ma = Force

To learn more about impulse-momentum theorem, click:

https://brainly.com/question/14121529

#SPJ6

The magnitude of your displacement can be equal to the distance you covered, or it can be less than the distance you covered.  But it can never be greater than the distance you covered.

This is because displacement is a straight line, whereas distance can be a straight line, a squiggly line, a zig-zag line, a line with loops in it, a line with a bunch of back-and-forths in it, or any other kind of line.

The straight line is always the shortest path between two points.

Answer:

Explanation:

What a lot of words to solve such a simple problem! The perpendicular force is the one that is pushing straight down on the plane. There is no side to side movement here or friction acting on this dimension at all. Perpendicular force is the same as the weight of the block. That's it! Perpendicular force is also normal force which is the same thing as weight:

w = mg so

w = (4.04)(9.8) and

w = 4.0 × 10¹ N

The magnitude of the perpendicular force that the block exerts on the surface of the plane at a distance of 2.37 m down the incline plane is 34.3N

The given parameter are:

mass M = 4.04 kg

Angle of inclination = 30 degree

Acceleration due to gravity = 9.8 m/s^s

To calculate the magnitude of the perpendicular force that the block exerts on the surface of the plane at a distance of 2.37 m down the plane, The force will be the weight of the block which is equal to the normal reaction.

Normal N = mgcosФ

N = 4.04 x 9.8 x cos30

N = 34.28 Newtons

At all point in the plane,  the magnitude of the perpendicular force that the block exerts on the surface of the plane will be the same.

Therefore,  the magnitude of the perpendicular force that the block exerts on the surface of the plane at a distance of 2.37 m down the incline plane is 34.3N

Learn more here : https://brainly.com/question/23944424

Answer:

This is the types of energy transformation

Explanation:

hope it helps

Answer:

The eddy currents will be very small.

Explanation:

An object made of several thin conducting layers separated by insulation may not be affected by magnetic damping because the eddy current produced in each layer due to induction will be very small and the opposing magnetic flux produced by the eddy currents will be very small.