Answer:
yes its okay i think so it is the correct answer
Which statement about RNA polymerase is NOT true?
RNA polymerase reads a template strand of DNA 5' to 3'
RNA polymerase binds to a promoter region to initiate transcription
RNA polymerase adds a ribonucleotide to the 3' end of a growing RNA molecule
During transcription of a gene, RNA polymerase reads only one strand of DNA
Please explain!
Answer:
RNA polymerase reads a template strand of DNA 5' to 3'
Explanation:
RNA polymerase is the enzyme accountable for the transcription of the DNA. It shows one coast of the DNA and transcribed within the RNA. It combines the nucleotide to the 3' conclusion of the expanding series of the RNA. It commences the method by connecting to the promoter area of the gene. The enzyme increases nucleotide, not ribonucleotide.
Therefore, A. RNA polymerase reads a template strand of DNA 5' to 3' is false.
Answer:
RNA polymerase reads a template strand of DNA 5' to 3'.
Explanation:
RNA synthesis is less processive during elongation than during initiation. Synthesis begins with the polymerase binding two rNTP molecules. The polymerase frequently releases the nascent transcript before it reaches 8-10 nucleotides in length.
Colette launches an air rocket in the upward, positive direction. It launches with an initial velocity of 25.5 m/s. It accelerates in the downward, negative direction at a rate of 9.81 m/s2. After 3.5 seconds, what is the magnitude of the rocket's displacement?
Answer:
Give me some hint please
Which force, in real life, will have the least effect on a bowling ball rolling down a lane toward bowling pins?
A) magnetism
B) air resistance
C) gravity
D) friction
Answer:
Its Friction
Explanation:
the pins are not floating and they are not a magnet and not involved with air
The force, in real life, that will have the least effect on a bowling ball rolling down a lane toward bowling pins is magnetism. The correct option is A.
What is magnetism?Magnetism is basically the force which indeed magnets exert when they attract or even repel one another. The movement of electric charges resulting in magnetism.
Every substance is composed of tiny units referred to as atoms. Each atom contains electrons, which are charged particles.
To increase stability, the pins themselves have a low center of gravity. Because they are spherical in shape, they can roll and strike other pins in a variety of directions.
The force acting on the bowling ball is friction and air resistance. The friction force is equal to the friction coefficient multiplied by the normal force, and thus mass times acceleration.
Thus, the correct option is A.
For more details regarding magnetism, visit:
https://brainly.com/question/2841288
#SPJ2
Market researchers were interested in the relationship between the number of pieces in a brick-building set and the
cost of the set. Information was collected from a survey and was used to obtain the regression equation ý =
0.08x + 1.20, where x represents the number of pieces in a set and ŷ is the predicted price in dollars) of a set.
What is the predicted price of a set that has 500 pieces?
$40
$41.20
$600
$6,235
When an elastic object is changed from its original shape:
A:Energy is released
B:Work is done
C:It is ruined
D:It makes a twanging sound
Answer:
deformation : elastic deformation is reversed when the force is removed. inelastic deformation is not fully reversed when the force is removed – there is a permanent change in shape.
Explanation:
tysm
A 770-kg two-stage rocket is traveling at a speed of 6.90×103 m/s away from Earth when a predesigned explosion separates the rocket into two sections of equal mass that then move with a speed of 2.60×103 m/s relative to each other along the original line of motion.What is the speed of each section (relative to Earth) after the explosion?How much energy was supplied by the explosion?
Answer:
Explanation:
Let's just have our reference frame travel along with the original un broken mass. This way the original velocity is not relevant.
Each half will have a mass of 770/2 = 385 kg
Each half will have the same magnitude of velocity (conservation of momentum) which will be 2.6 x 10³/2 = 1.30 x 10³ m/s
Now add back the reference frame velocity to get velocity relative to earth.
Section one will have velocity 6.90 x 10³ + 1.30 x 10³ = 8.2 x 10³ m/s
Section two will have velocity 6.90 x 10³ - 1.30 x 10³ = 5.6 x 10³ m/s
In the moving reference frame, each half will have kinetic energy which could only come from the explosion
KE = ½(385)(1.3 x 10³)² = 325,325,000 J
2(325,325,000) = 650,650,000 J released in the explosion.
Rounding to the three significant figures of the problem numerals
E = 6.50 x 10⁸ J or 650 MJ released
Acceleration of a car that speeds from 4.3 m/s to 12.9 m/s in 2 seconds
Explanation:
let v1 = 4.3 m/s
v2 = 12.9 m/s
t = 2 seconds
v2 = v1 + at
12.9 = 4.3 + a×2
2a = 12.9 - 4.3 = 8.6
a = 8.6/2
a = 4.3 m/s^2
A photographer wants to determine the color of light he can use in the darkroom that will not expose the films he is processing. In one trial, he used a blue incandescent bulb. Which bulb can he use for another trial?
A. Red incandescent bulb C. Red fluorescent bulb
B. Blue incandescent bulb D. Blue fluorescent bulb
For a photographer that wishes to determine the color of light that he can use in a dark room that will not expose the films he is processing, having used a Blue Incandescent bulb, he should proceed to use a Red Incandescent bulb for the next trial.
The photographer in question is performing an experiment. For these kinds of experiments it is important to identify the variables present, which can be of three kinds:
Control variablesDependent variables Independent variablesFor this experiment, the dependent variable is the exposure of the light onto the films, given that this is what we wish to measure. The independent variable will be the color of the light being used which is what will affect the dependent variable.
The remaining variable must be the control variable. Unlike the previous variables, we can have more than one of these. The control variable is there to make sure that only the dependent variable is affecting the outcome. We do this by keeping the control variable the same through each trial, which is why the photographer should not change the type of bulb in the second experiment, changing only the color of the light.
To learn more visit:
https://brainly.com/question/1549017?referrer=searchResults
A girl of mass m1=60.0 kilograms springs from a trampoline with an initial upward velocity of vi=8.00 meters per second. At height h=2.00 meters above the trampoline, the girl grabs a box of mass m2=15.0 kilograms. (Figure 1)
For this problem, use g=9.80 meters per second per second for the magnitude of the acceleration due to gravity.
What is the speed vbefore of the girl immediately before she grabs the box?
Express your answer numerically in meters per second.
What is the speed vafter of the girl immediately after she grabs the box?
Express your answer numerically in meters per second.
What is the maximum height hmax that the girl (with box) reaches? Measure hmax with respect to the top of the trampoline.
The conservation of momentum and energy allows to shorten the results for the movement of the girl on the trampoline holding the box are:
a) the girl's speed is v = 4.98 m / s
b) The speed of the girl + box system is: v_f = 0.996 m / s
c) the maximum height is: y = 2.05 m
Kinematics studies the movement of bodies, looking for relationships between the position, velocity and acceleration of bodies.
The momentum is defined by the product of mass and the velocity, when a system is isolated the momentum is conserved.
The mechanical energy is the sum of the kinetic energy plus the potential energies, when there is no friction in the system the mechanical energy is conserved.
Let's solve this exercise in parts:
a) Let's use kinematics to find the speed of the girl before she grabs the box
v² = v₀² - 2 g y₁
v² = 8² - 2 9.8 2.00
v = R 24.8 = 4.98 m / s
b) Let's use momentum conservation for when the speed of the girl and the box together. Let's write the moment in two moments.
Initial instant. Just before you grab the box.
p₀ = M v + 0
Final moment. Right after taking the box
[tex]p_f[/tex] = (m + M) [tex]v_f[/tex]
In system this form by the girl and the box therefore it is an isolated system and the momentum is conserved.
[tex]p_o = p_f[/tex]
mv = (m + M) [tex]v_f[/tex]
[tex]v_f = \frac{m}{m+M} \ v[/tex]
Let's calculate
[tex]v_f = \frac{15}{15+ 60} \ 4.98[/tex]
[tex]v_f[/tex] = 0.996 m / s
c) Now we use conservation of energy after the girl has the box.
Starting point. When the girl has the box
Em₀ = K + U
Em₀ = ½ (m + M) v² + (m + M) g y₁
Final point. At the highest point of the trajectory
[tex]Em_f[/tex] = U
[tex]Em_f[/tex] = (m + M) g y₁
As there is no friction, the energy is conserved.
[tex]Em_o = Em_f[/tex]
½ (m + M) v² + (m + M) g y₁ = (m + M) g y
y = [tex]\frac{v^2}{2g} + y_1[/tex]
Let's calculate
y = [tex]\frac{0.996^2}{2 \ 9.8} + 2.0[/tex]
y = 2.05 m
In conclusion using the conservation of momentum and energy we can shorten the results for the movement of the girl on the trampoline holding the box are:
a) the girl's speed is v = 4.98 m / s
b) The speed of the girl + box system is: v_f = 0.996 m / s
c) the maximum height is: y = 2.05 m
Learn more here: brainly.com/question/15095150
Answer:
Vbefore = 4.98 m/s
Vafter = 3.98 m/s
Hmax = 2.81 m
PLEASE HELP!!!
If a 40cm rope with a 220g bob can hold a maximum tension of 3N
a) what are the maximum angular velocity and inclination angle it can reach before the rope break?
b) Angle of inclination
Answer:
ω = 3.1 rad/s
θ = 36° from vertical
Explanation:
I will ASSUME that the bob and string is acting as a pendulum.
Please understand that the string will break when the bob is at the lowest point of the swing where the vectors of gravity and centripetal acceleration align. It will NOT break at the angle of maximum inclination measured from vertical. This angle is only a component of the maximum potential energy that gets converted to maximum kinetic energy at the lowest point of the swing.
At the bottom of the swing, the string must support the weight of the bob plus supply the required centripetal acceleration.
F = mg + mω²R
F/m = g + ω²R
F/m - g = ω²R
ω = √((F/m - g)/R)
ω = √((3/0.220 - 9.8)/0.40)
ω = 3.09691...
ω = 3.1 rad/s
Potential energy will convert to kinetic energy
mgh = ½mv²
h = v²/2g
R - Rcosθ = v²/2g
R(1 - cosθ) = v²/2g
1 - cosθ = v²/2gR
cosθ = 1 - v²/2gR
cosθ = 1 - (Rω)²/2gR
cosθ = 1 - Rω²/2g
cosθ = 1 - 0.40(3.1²)/(2(9.8))
cosθ = 0.804267
θ = 36.46045...
θ = 36°
which of the following is used to transport sound waves
A.medium
B.vacuum
C.mass
D.light
I think the answer is d.right?
50 points help
Column I Column II
______ 1. acceleration a. change in distance over time
______ 2. speed b. time interval
______ 3. velocity c. scalar
______ 4. Δt. d. change in position
______ 5. Magnitude only e. change in velocity over time
______ 6. Δx f. change in displacement over time
[tex]\\ \sf\longmapsto Acceleration\longrightarrow Change\:in\: Velocity\:over\:time[/tex]
[tex]\\ \sf\longmapsto Speed\longrightarrow Change\:in\: Distance\:over\:Time[/tex]
[tex]\\ \sf\longmapsto Velocity\longrightarrow Change\:in\: Displacement\: over\:time[/tex]
[tex]\\ \sf\longmapsto ∆t\longrightarrow Time\: interval [/tex]
[tex]\\ \sf\longmapsto Magnitude\:only\longrightarrow Scaler[/tex]
[tex]\\ \sf\longmapsto ∆x=Change\:in\: position [/tex]
A Scooter has a mass of 250 kg. A constant force is exerted on it for 6.0 s. During the time the force is exerted, the scooter increases its speed from 6.00 m/s to 280 m/s. What is the magnitude of the force exerted on the scooter
Answer:
917 N
Explanation:
917 N, this is your answer!!
Glad to help.
A mountain climber encounters a crevasse in an ice field. The opposite side of the crevasse is a height h lower, and is separated horizontally by a distance w. To cross the crevasse, the climber gets a running start and jumps in the horizontal direction. If the height of the crevasse increases but the width remains the same, then,
Select one:
O a. the minimum speed needed to cross the crevasse stays the same.
O b. the minimum speed needed to cross the crevasse will depend on the mass of the mountain climber.
O c. the minimum speed needed to cross the crevasse decreases.
O d. the minimum speed needed to cross the crevasse increases.
O e. the minimum speed needed to cross the crevasse will depend on the weight of the mountain climber.
Which scientist is credited with having the greatest contribution to early microscopy and was the first to observe and describe single-celled organisms?
Answer:
Antonie van Leeuwenhoek
Explanation:
5. A quarterback throws the football to a stationary receiver who is 31.5 m
down the field. If the football is thrown at an initial angle of 40.0° to the
ground, at what initial speed must the quarterback throw the ball for it
to reach the receiver? What is the ball's highest point during its flight?
The projectile launch equations allow to find the results for the questions about the movement of the ball are:
The initial velocity is: v₀ = 17.7 m / s. The maximum height is: y = 16 m.
Given parameters
Horizontal distance x = 31.5 m Launch angle tea = 40ºTo find
The initial speed. Maximum height.
Projectile launching is an application of kinematics, where on the x-axis there is no acceleration and on the y-axis is the gravity acceleration.
The range is the distance traveled for the same departure height, see attached.
.
R =[tex]\frac{v_o^2 \ sin 2\theta}{g}[/tex]
[tex]v_o^2 = \frac{ g R}{sin 2 \theta }[/tex]
Let's calculate.
v₀² = [tex]\frac{9.8 \ 31.5}{sin \ (2 \ 40)}[/tex]9.8 31.5 / sin (2 40.0)
[tex]v_o = \sqrt{313.46}[/tex]o = ra 313.46
v₀ = 17.7 m / s
At the point of maximum height the vertical speed is zero.
v² = v₀² - 2 g y
0 = v₀² - 2g y
y = [tex]\frac{v_o^2}{2g}[/tex]
Let's calculate.
y = [tex]\frac{17.7^2}{2 \ 9.8}[/tex]
y = 16 m
In conclusion, using the projectile launch equations we can find the results for the questions about the movement of the ball are:
The initial velocity is: v₀ = 17.7 m / s The maximum height is: y = 16 m.
Learn more here: brainly.com/question/10903823
Alex is x years old . June is 7years older than Alex . their total combined ages is 29 years . find June,s age . show all work algebraically
Answer:
18 yearsExplanation:
Given,
Let Alex be = x years
Then June will be = (7 + x) years
We know that,
Their total combined age is 29 years
Therefore,
By the problem,
=> x + (7 + x) = 29
=> 2x = 29 - 7
=> 2x = 22
=> x = 22 ÷ 2
=> x = 11
So,
Required age of June is = (7 + x) years
= (7 + 11) years
= 18 years (Ans)
Does the stone remain at a constant speed? Or does it speed up?
Answer:
it would remain the same speed
Explanation: the rock isnt going down a hill or anything so therefore if gravity isnt pulling it down a slope then it would remain the same pace
What does it mean that " memory is organized in semantic
networks
Answer:
Semantic memory is a category of long-term memory that involves the recollection of ideas, concepts and facts commonly regarded as general knowledge. Examples of semantic memory include factual information such as grammar and algebra.
The figure shows the light intensity on a screen behind a double slit. The slit spacing is 0.22 mm and the screen is 2.0 m behind the slits (Figure 1). What is the wavelength of the light?
The wavelength of the light is 550 nm
For a double slit interference pattern with slit spacing, d we have
dsinθ = mλ where d = slit spacing = 0.22 mm = 0.22 × 10⁻³ m, m = number of maximum fringe = 2(from the picture) and λ = wavelength of light.
Thus sinθ = mλ/d
Also, tanθ = L/D where L = distance between central maximum and fringe = 2.0 cm/2 = 1.0 cm = 1 × 10⁻² m and D = distance between slit and screen = 2.0 m
Since θ is small, sinθ ≅ tanθ
So, mλ/d = L/D
Making λ subject of the formula, we have
λ = dL/mD
Substituting the values of the variables into the equation, we have
λ = dL/mD
λ = 0.22 × 10⁻³ m × 1 × 10⁻² m/(2 × 2.0 m)
λ = 0.22 × 10⁻⁵ m²/4.0 m
λ = 0.055 × 10⁻⁵ m
λ = 0.55 × 10⁻⁶ m
λ = 550 × 10⁻⁹ m
λ = 550 nm
So, the wavelength of the light is 550 nm
Learn more about double slit interference here:
https://brainly.com/question/4449144
What is non examples of enlarged
reduction
deflation
these are examples of the opposite of enlarged to make something smaller is really the key thing here
 what is the difference between repelling and attracting
Answer:
Attracting means pulling toward you and repelling means pushing away
Explanation:
Answer: Repelling is when something will not connect with another object. The force will cause a repel between the two objects. Attracting is when something is attracted or being pulled to another object.
Explanation: Hope this helps!
What on earth is equal to 9.8m/s/s
Answer:
Acceleration due to gravity
If you do 72 J of work in 1.2 seconds, how much power is produced
Answer:
Explanation:
Power is the rate of doing work
P = 72 / 1.2 = 60 Watts
1.25 is closer to 1.04 or not ?
plz heelp plz
Answer:
No, it is closer to 1.30
Explanation:
Am object of mass in a circular path of radius 100metres with the speed of 10metres/second.calculate the acceleration towards the center
Answer:
is 6
Explanation:
h
A meter stick is attached to one end of a rigid rod with negligible mass of length l = 0.302 m. The other end of the light rod is suspended from a pivot point, as shown in the figure below. The entire system is pulled to a small angle and released from rest. It then begins to oscillate. A meter stick hung from a rod of length l. The rod is attached to the ceiling. The rod and meter stick extend downward in a straight line making a small angle with the vertical. (a) What is the period of oscillation of the system (in s)? (Round your answer to at least three decimal places.)
The period of oscillation of the system nearest to three decimal places
= 1.092 seconds
The period of an oscillation occurring in a system is the time taken to complete one cycle.
The formula that is used to calculate the period of oscillation (T) is
= 2π√[tex]\frac{l}{g}[/tex]
But,
π = 3.14159 (constant)
g= 10m/s² (acceleration due to gravity)
l = 0.302 m
Therefore T = 2 × 3.14159 × √[tex]\frac{0.302}{10}[/tex]
= 6.28318 x √0.0302
= 6.28318 x 0.17378
= 1.09189s
= 1.092 seconds ( to the nearest three decimal places)
Learn more here:
https://brainly.com/question/23752181
Define average atomic mass and explain how it is calculated
Answer:
The average atomic mass of an element is the sum of masses of it's isotopes
Each are multiplied by it's natural abundance
Explanation:
The average atomic mass of an element is the sum of masses of it's isotopes
Each are multiplied by it's natural abundance
A hot air balloon rising vertically is tracked by an observer located 2 miles from the lift-off point. At a certain moment, the angle between the observer's line-of-sight and the horizontal is , and it is changing at a rate of 0.1 rad/min. How fast is the balloon rising at this moment
We have that for the Question, it can be said that
the balloon rising at [tex]0.266miles/min[/tex]From the question we are told
An observer located 2 miles from the lift-off point. At a certain moment, the angle between the observer's line-of-sight and the horizontal is , and it is changing at a rate of 0.1 rad/min.From,
[tex]tan\theta = \frac{h}{2}[/tex]
differentiate with respect to h
[tex]sec^2\theta * \frac{do}{dz} = \frac{1}{2} * \frac{dh}{dz}\\\\\frac{dh}{dz} = 2 sec^\theta * \frac{d\theta}{dz}\\\\\theta = \frac{\pi}{6} and \frac{d\theta}{dz} = 0.1rad/min\\\\\frac{dh}{dz} = 2sec^2 (\frac{\pi}{6}) * (0.1)\\\\= 0.266miles/min[/tex]
For more information on this visit
https://brainly.com/question/23379286
PLEASE PLEASE HELP!!
An arrow is shot straight up in the air from the ground with an initial velocity of 54.0 m/s. If on striking the ground it
embeds itself 15.0 cm into the ground, what is the acceleration required to stop the arrow when it hits the ground?
Answer:
you have patience the distance.
Explanation:
the train leaves at 6.30.