Many types of decorative lights are connected in parallel. If a set of lights is connected to a 110 V source and the filament of each bulb has a hot resistance of what is the currentthrough each bulb

Answers

Answer 1

Answer:

i₀ = V / R_i

Explanation:

For this exercise we use Ohm's law

         V = i R

          i = V / R

the equivalent resistance for

         [tex]\frac{1}{R_{eq}}[/tex] =  ∑ [tex]\frac{1}{R_i}[/tex]

if all the bulbs have the same resistance, there are N bulbs

         [tex]\frac{1}{ R_{eq}} = \frac{N}{R_i}[/tex]

         R_{eq} = R_i / N

we substitute

         i = N V / Ri

where i is the total current that passes through the parallel, the current in a branch is

         i₀ = i / N

         i₀ = V / R_i


Related Questions

Explain what a circuit breaker is and how it helps protect your house?

Answers

Explanation:

A circuit breaker is an electrical switch designed to protect an electrical circuit from damage caused by overcurrent/overload or short circuit. Its basic function is to interrupt current flow after protective relays detect a fault.

Circuit breakers have been designed to detect when there is a fault in the electricity, so it will “trip” and shut down electrical flow. ... This detection is key to preventing surges of electricity that travel to appliances or other outlets, which can cause them to break down

Four equal-value resistors are in series with a 5 V battery, and 2.23 mA are measured. What isthe value of each resistor

Answers

Answer:

560.54 Ω

Explanation:

Applying,

V = IR'............... Equation 1

Where V = Voltage of the battery, I = currrent, R' = Total resistance of the resistors

make R' the subject of the equation

R' = V/I............ Equation 2

From the question,

Given: V = 5 V, I = 2.23 mA = 2.23×10⁻³ A

Substitute these values into equation 2

R' = 5/(2.23×10⁻³ )

R' = 2242.15 Ω

Since the fours resistor are connected in series and they are equal,

Therefore the values of each resistor is

R = R'/4

R = 2242.15/4

R = 560.54 Ω

A cylindrical container with a cross sectional area of 65.2 cm^2 holds a fluid of density 806 kg/m^3. At the bottom of the container the pressure is 116 kPa.
(a) What is the depth of the fluid?
(b) Find the pressure at the bottom of the container after an additional 2.05 X 10^-3 m^3 of this fluid is added to the container. Assume that no fluid spills out of the container.

Answers

The right answer is (b)

find the weight of a body of mass 200kg on the earth at a latitude 30°.(R=6400 km ,g=9.8m/s²,ω=7.27×10⁻⁵ rad/sec)

Answers

Answer:

................ftf6x

Part AFind the x- and y-components of the vector d⃗ = (4.0 km , 29 ∘ left of +y-axis).Express your answer using two significant figures. Enter the x and y components of the vector separated by a comma.d⃗ = km Part BFind the x- and y-components of the vector v⃗ = (2.0 cm/s , −x-direction).Express your answer using two significant figures. Enter the x and y components of the vector separated by a comma.v⃗ = cm/s Part CFind the x- and y-components of the vector a⃗ = (13 m/s2 , 36 ∘ left of −y-axis).Express your answer using two significant figures. Enter the x and y components of the vector separated by a comma.a⃗ x = m/s2

Answers

Solution :

Part A .

Given : The [tex]x[/tex] and [tex]y[/tex] components of the vector, d = [tex]\text{4 km 29}[/tex] degree left of [tex]y[/tex]-axis.

So the [tex]x[/tex] component is = -4 x sin (29°) = -1.939 km

           [tex]y[/tex] component is = 4 x cos (29°) = 3.498 km

Part B

Given : The [tex]x[/tex] and [tex]y[/tex] components of the vector, [tex]\text{v = 2 cm/s}[/tex] , [tex]\text{-x direction}[/tex]

So the [tex]x[/tex] component is = -2 cm/s

           [tex]y[/tex] component is = 0

Part C

Given : The [tex]x[/tex] and [tex]y[/tex] components of the vector, [tex]\text{a = 13 m/s, 36 degree}[/tex] left of [tex]y[/tex]-axis.

So the [tex]x[/tex] component is = -13 x sin (36°) = -7.6412 [tex]m/S^2[/tex]

           [tex]y[/tex] component is = -13 x cos (36°) = -10.517 [tex]m/S^2[/tex]

The x- and y-components of the vectors  is mathematically given as as follows for each Part respectively

x= -1.939 km, y= 3.498 km

x= -2 cm/s, 0

y=, x= -7.6412m/s^2, -10.517m/s^2

What are the x- and y-components of the vectors?

Question Parameters:

Generally, we follow a basic principle where

x component= Fsin\theta

y component= Fcos\theta

Therefore

For A

x component is

x= -4 x sin (29°)

x= -1.939 km

 y component is

y= 4 x cos (29°)

y= 3.498 km

For B

x component is

x= -2 cm/s            

y component is

y= 0

For C

x component is

x= -13 x sin (36°)

x= -7.6412m/s^2      

y component is

y= -13 x cos (36°)

y= -10.517m/s^2  

Read more about Cartession co ordinate

https://brainly.com/question/9410676

A wire 54.6 cm long carries a 0.480 A current in the positive direction of an x axis through a magnetic field with an x component of zero, a y component of 0.000420 T, and a z component of 0.0130 T. Find the (a) x, (b) y, and (c) z components of the magnetic force on the wire.

Answers

Answer:

wire 66.0 cm long carries a 0.750 A current in the positive direction of an x axis through a magnetic field $$\vec { B } = ( 3.00 m T ) \hat { j } ...

Top answer · 1 vote

Two children sit on a seesaw that is in rotational equilibrium. The first child has weight W and sits at distance d from the pivot. If the second child sits at a distance of 7*d from the pivot, what must be the weight of the second child

Answers

Answer:

W/7

Explanation:

By principle of moments,

Sum of clockwise moment = sum of anticlockwise moment

Weight × 7d = W × d

Weight = W/7

Since the two children are in rotational equilibrium, the weight of the second child is W/7.

How can the weight of the second child be determined?

The weight of the second child can be determined from the principle of moments.

The principle of moments states that for a body in equilibrium, the sum of the clockwise moments and anticlockwise moments about a point is zero.

Let the weight of the second child be X

From the principle of moments:

W × d = 7×d × X

X = W/7

Therefore, the weight of the second child is W/7.

Learn more about principle of moments at: https://brainly.com/question/20298772

An object is suspended by a string from the ceiling of an elevator. If the tension in the string is equal to 25 N at an instant when the elevator is accelerating downward at a rate of 2.0 , what is the mass of the suspended object

Answers

By Newton's second law, the net force on the object is

F = T - mg = - ma

where

T = 25 N, the tension in the string

• m is the mass of the object

• g = 9.8 m/s², the acceleration due to gravity

a = 2.0 m/s², the acceleration of the elevator-object system

Solve for m :

25 N - m (9.8 m/s²) = - m (2.0 m/s²)

==>   m = (25 N) / (9.8 m/s² - 2.0 m/s²) ≈ 3.2 kg

The 1 kg box is sliding along a frictionless surface. It collides with and sticks to the 2 kg box. Afterward, the speed of the two boxes is:__________.
A) 0 m/s
B) 1 m/s
C) 2 m/s
D) 3 m/s
E) Not enough info

Answers

Answer:

The correct option is (E).

Explanation:

Given that,

Mass of object 1, m₁ = 1 kg

Mass of object 2, m₂ = 2 kg

They collides after the collision. We need to find the speed of the two boxes after the collision.

The initial speeds of both boxes is not given. So, we can't put the values of their speeds in the momentum conservation equation.

So, the information is not enough.

An ice skater with a mass of 50 kg is gliding acrossthe ice at a speed of 8 m/s when herfriend comes up from behind and gives her a push,causing her speed to increase to 12m/s. How much work did the friend do on the skater

Answers

Answer:

[tex]W=2KJ[/tex]

Explanation:

From the question we are told that:

Mass [tex]M=50kg[/tex]

Initial Velocity [tex]v_1=8m/s[/tex]

Final Velocity [tex]v_2=12m/s[/tex]

Generally the equation for Work-done is mathematically given by

W=\triangle K.E

Therefore

 [tex]W=0.5M(v_2^2-v_1^2)[/tex]

 [tex]W=0.5*50(12^2-8^2)[/tex]

 [tex]W=2KJ[/tex]

a particle undergoes three consecutive displacement d1=(15i+30j+12k)cm,d2=(23i-14j-5.0k)cm and d3=(-13i+15j)cm find the component of the resultant displacement and magnitude?​

Answers

Answer:

Explanation:

The density of pure water is 1 gram per 1 milliliter or one cubic cm. By knowing the density of water we can use it in dilution equations or to calculate the specific gravity of other solutions.

It can also help us determine what other substances are made of using the water displacement experiment. This is done by observing how much water is displaced when an object is submerged in the water. As long as you know the density of the water, the mass of the object being submerged and the volume of increase you can calculate the density of the object.

This was done by the great Archimedes in discovering what composed the kings crown.

A horse gallops a distance of 10 kilometers in a time of 30 minutes its average speed is?

Answers

Answer:

20 km/hr

Explanation:

Distance = 10km

Time = 30 minutes = 1/2 hour

Average Speed = Total distance / Total Time Taken

                           = 10 ÷  1/2

                           = 10 x 2

                           = 20 km/hr

Average speed = (distance covered) / (time to cover the distance)

Average speed = (10 km) / (30 minutes)

Average speed =  1/3 km/min

Most people would probably want to see it in a more convenient, more familiar unit, such as km/hour or m/second.

(10 km / 30 min) x (60 min / hour) = (10 x 60 / 30) (km-min / min-hour)

Average speed = 20 km/hour

AvgSpd = (10 km / 30 min) x (1,000 m / km) x (min / 60 sec)

AvgSpd = (10x1,000 / 30x60) (km-m-min / min-km-sec)

Averge Speed =  5.56 m/s

state the story of archimedes​

Answers

Answer:

Archimedes was born about 287 BCE in Syracuse on the island of Sicily. He died in that same city when the Romans captured it following a siege that ended in either 212 or 211 BCE. One story told about Archimedes' death is that he was killed by a Roman soldier after he refused to leave his mathematical work.

Differences between angle of twist and angle of shear

Answers

Answer:

idek

Explanation:

b) Two skaters collide and grab on to each other on a frictionless ice. One of them, of mass 80 kg, is moving to the right at 5.0 m/s, while the other of mass 70 kg is moving to the left at 2.0 m/s. What are the magnitude and direction of the two skaters just after they collide

Answers

Answer:

The two skaters move with a speed of 1.73 m/s after the collision in the right direction.

Explanation:

Given that,

The mas of skater 1, m₁ = 80 kg

The speed of skater 1, u₁ = 5 m/s (right)

The mass of skater 2, m₂ = 70 kg

The speed of skater 2, u₂ = -2 m/s (left)

Let v is the magnitude of the two skaters just after they collide. They must have a common speed. So, using the conservation of momentum as follows :

[tex]m_1u_1+m_2u_2=(m_1+m_2)v\\\\v=\dfrac{m_1u_1+m_2u_2}{(m_1+m_2)}[/tex]

Put all the values,

[tex]v=\dfrac{80(5)+70(-2)}{(80+70)}\\\\=1.73m /s[/tex]

So, the two skaters move with a speed of 1.73 m/s after the collision in the right direction.

Which phase of matter makes up stars?
O liquid
O gas
O plasma

Answers

Answer:

The answer to this question is plasma

Answer:

Plasma

Explanation:

An automobile engine has an efficiency of 22.0% and produces 2510 J of work. How much heat is rejected by the engine

Answers

Answer:

If efficiency is .22 then  W = .22 * Q   where Q is the heat input

Heat Input    Q = 2510 / .22 = 11,400 J

Heat rejected = 11.400 - 2510 = 8900  J of heat wasted

Also, 8900 J / (4.19 J / cal) = 2120 cal

An efficiency is the measure of productivity of an engine. The heat rejected by the engine is 8900 Joules.

What is efficiency?

An efficiency of a heat engine is the ratio of the work done and heat supplied.

Given is the automobile engine has the efficiency 22% and Work done is 2510 Joules.

The efficiency is written as,

η= W / Qs.

The work done is W= Qs - Qr, where Qr is the rejected heat.

The heat rejected can be represented as

Qr = W ( 1/η -1)

Substituting the value into the equation, we get the rejected heat.

Qr = 2510 (1/0.22 -1)

Qr = 8900 Joules.

Thus, the heat rejected by the engine is 8900 Joules.

Learn more about efficiency.

#SPJ2

A 70.0-kg person throws a 0.0430-kg snowball forward with a ground speed of 32.0 m/s. A second person, with a mass of 58.5 kg, catches the snowball. Both people are on skates. The first person is initially moving forward with a speed of 3.30 m/s, and the second person is initially at rest. What are the velocities of the two people after the snowball is exchanged

Answers

Answer:

The velocities of the skaters are [tex]v_{1} = 3.280\,\frac{m}{s}[/tex] and [tex]v_{2} = 0.024\,\frac{m}{s}[/tex], respectively.

Explanation:

Each skater is not under the influence of external forces during process, so that Principle of Momentum Conservation can be used on each skater:

First skater

[tex]m_{1} \cdot v_{1, o} = m_{1} \cdot v_{1} + m_{b}\cdot v_{b}[/tex] (1)

Second skater

[tex]m_{b}\cdot v_{b} = (m_{2}+m_{b})\cdot v_{2}[/tex] (2)

Where:

[tex]m_{1}[/tex] - Mass of the first skater, in kilograms.

[tex]m_{2}[/tex] - Mass of the second skater, in kilograms.

[tex]v_{1,o}[/tex] - Initial velocity of the first skater, in meters per second.

[tex]v_{1}[/tex] - Final velocity of the first skater, in meters per second.

[tex]v_{b}[/tex] - Launch velocity of the meter, in meters per second.

[tex]v_{2}[/tex] - Final velocity of the second skater, in meters per second.

If we know that [tex]m_{1} = 70\,kg[/tex], [tex]m_{b} = 0.043\,kg[/tex], [tex]v_{b} = 32\,\frac{m}{s}[/tex], [tex]m_{2} = 58.5\,kg[/tex] and [tex]v_{1,o} = 3.30\,\frac{m}{s}[/tex], then the velocities of the two people after the snowball is exchanged is:

By (1):

[tex]m_{1} \cdot v_{1, o} = m_{1} \cdot v_{1} + m_{b}\cdot v_{b}[/tex]

[tex]m_{1}\cdot v_{1,o} - m_{b}\cdot v_{b} = m_{1}\cdot v_{1}[/tex]

[tex]v_{1} = v_{1,o} - \left(\frac{m_{b}}{m_{1}} \right)\cdot v_{b}[/tex]

[tex]v_{1} = 3.30\,\frac{m}{s} - \left(\frac{0.043\,kg}{70\,kg}\right)\cdot \left(32\,\frac{m}{s} \right)[/tex]

[tex]v_{1} = 3.280\,\frac{m}{s}[/tex]

By (2):

[tex]m_{b}\cdot v_{b} = (m_{2}+m_{b})\cdot v_{2}[/tex]

[tex]v_{2} = \frac{m_{b}\cdot v_{b}}{m_{2}+m_{b}}[/tex]

[tex]v_{2} = \frac{(0.043\,kg)\cdot \left(32\,\frac{m}{s} \right)}{58.5\,kg + 0.043\,kg}[/tex]

[tex]v_{2} = 0.024\,\frac{m}{s}[/tex]

When you hammer a nail into wood, the nail heats up. 30 Joules of energy was absorbed by a 5-g nail as it was hammered into place. How much does the nail's temperature increase (in °C) during this process? (The specific heat capacity of the nail is 450 J/kg-°C, and round to 3 significant digits.

Answers

Answer:

13.33 K

Explanation:

Given that,

Heat absorbed, Q = 30 J

Mass of nail, m = 5 g = 0.005 kg

The specific heat capacity of the nail is 450 J/kg-°C.

We need to find the increase in the temperature during the process. The heat absorbed in a process is as follows:

[tex]Q=mc\Delta T\\\\\Delta T=\dfrac{Q}{mc}\\\\\Delta T=\dfrac{30}{0.005\times 450}\\\\=13.33\ K[/tex]

So, the increase in temperature is 13.33 K.

Hi can someon help me how to answer this?
Btw I'm from Philippines

Answers

Answer:

Test 1

1.True

2.True

3.True

4.False

5.True

6.True

7.False

8.True

9.True

10.True

yung iba nasa pic

water contracts on freezing is it incorrect or conrrect

Answers

Answer:

hope it helps

much as you can

The period of a pendulum is the time it takes the pendulum to swing back and forth once. If the only dimensional quantities that the period depends on are the acceleration of gravity, g, and the length of the pendulum, l, what combination of g and l must the period be proportional to

Answers

Explanation:

Let T is the period of a pendulum. The SI unit of time is seconds (s).

It depends on the acceleration of gravity, g, and the length of the pendulum, l.

The SI unit of acceleration of gravity, g and the length of the pendulum, l are m/s² and m respectively.

If we divide m and m/s², we left with s². If the square root of s² is taken, we get s only i.e. the SI unit of period of a pendulum.

So,

[tex]T\propto \sqrt{\dfrac{l}{g}}[/tex]

Hence, this is the required solution.

The thrust F of a screw propeller is known to depend upon the diameter d, Speed of advance v, fluid density e, revolution per second N, and the coefficient of viscosity M, of the fluid. Find the expression for F, in terms of the quantities

Answers

Answer:

[tex]{ \bf{F = { \tt{ \frac{4}{3} \pi {r}^{3}v gM}}}}[/tex]

Of the following, which have the highest frequency in the electromagnetic
spectrum?
A. Visible light
B. Infrared waves
C. Ultraviolet rays
D. X-rays

Answers

d. X rays ..........

A 190 g glider on a horizontal, frictionless air track is attached to a fixed ideal spring with force constant 160 N/m. At the instant you make measurements on the glider, it is moving at 0.835 m/sm/s and is 4.00 cmcm from its equilibrium point.

Required:
a. Use energy conservation to find the amplitude of the motion.
b. Use energy conservation to find the maximum speed of the glider.
c. What is the angular frequency of the oscillations?

Answers

(a) Let x be the maximum elongation of the spring. At this point, the glider would have zero velocity and thus zero kinetic energy. The total work W done by the spring on the glider to get it from the given point (4.00 cm from equilibrium) to x is

W = - (1/2 kx ² - 1/2 k (0.0400 m)²)

(note that x > 4.00 cm, and the restoring force of the spring opposes its elongation, so the total work is negative)

By the work-energy theorem, the total work is equal to the change in the glider's kinetic energy as it moves from 4.00 cm from equilibrium to x, so

W = ∆K = 0 - 1/2 m (0.835 m/s)²

Solve for x :

- (1/2 (160 N/m) x ² - 1/2 (160 N/m) (0.0400 m)²) = -1/2 (0.190 kg) (0.835 m/s)²

==>   x ≈ 0.0493 m ≈ 4.93 cm

(b) The glider attains its maximum speed at the equilibrium point. The work done by the spring as it is stretched away from equilibrium to the 4.00 cm position is

W = - 1/2 k (0.0400 m)²

If v is the glider's maximum speed, then by the work-energy theorem,

W = ∆K = 1/2 m (0.835 m/s)² - 1/2 mv ²

Solve for v :

- 1/2 (160 N/m) (0.0400 m)² = 1/2 (0.190 kg) (0.835 m/s)² - 1/2 (0.190 kg) v ²

==>   v1.43 m/s

(c) The angular frequency of the glider's oscillation is

√(k/m) = √((160 N/m) / (0.190 kg)) ≈ 29.0 Hz

The amplitude of the motion is 0.049 cm. The maximum speed of the glider is 1.429 m/s. The angular frequency of the oscillation is 29.02 rad/s

From the given information;

the mass of the glider = 190 gForce constant k = 160 N/mthe horizontal speed of the glider [tex]v_x[/tex] = 0.835 m/sthe distance away from the equilibrium = 4.0 cm = 0.04 m

Using energy conservation E, the amplitude of the motion can be calculated by using the formula:

[tex]\mathbf{E = \dfrac{1}{2}mv^2 + \dfrac{1}{2}kx^2}[/tex]

[tex]\mathbf{E = \dfrac{1}{2}(0.19 \ kg )\times (0.835)^2 + \dfrac{1}{2}(160) (0.04)^2}[/tex]

[tex]\mathbf{E =0.194 \ J}[/tex]

Similarly, we know that:

[tex]\mathbf{E = \dfrac{1}{2}kA^2}[/tex]

Making amplitude A the subject, we have:

[tex]\mathbf{A = \sqrt{\dfrac{2E}{k}}}[/tex]

[tex]\mathbf{A = \sqrt{\dfrac{2(0.194)}{160}}}[/tex]

[tex]\mathbf{A =0.049 \ cm}[/tex]

Again, using the energy conservation, the maximum speed of the glider can be calculated by using the formula:

[tex]\mathbf{E =\dfrac{1}{2} mv^2 _{max}}[/tex]

[tex]\mathbf{v _{max} = \sqrt{\dfrac{2E}{m}}}[/tex]

[tex]\mathbf{v _{max} = \sqrt{\dfrac{2\times 0.194}{0.19}}}[/tex]

[tex]\mathbf{v _{max} = 1.429 \ m/s}[/tex]

The angular frequency of the oscillation can be computed by using the expression:

[tex]\mathbf{\omega = \sqrt{\dfrac{k}{m}}}[/tex]

[tex]\mathbf{\omega = \sqrt{\dfrac{160}{0.19}}}[/tex]

ω = 29.02 rad/s

Learn more about energy conservation here:

https://brainly.com/question/13010190?referrer=searchResults

convert 2.4 milimetre into metre​

Answers

Answer is 0.0024

Explanation

divide the length value by 1000.

Explain the following defects of a simple electric cell:

a.Polarization,

ß. Local action.​

Answers

Answer:

Explanation:

The two major defects of simple electric cells causes current supplied to be for short time. These defects are: polarization and local action.

a. Polarization: This is a defect caused by an accumulation of hydrogen bubbles at the positive electrode of the cell. It can be prevented by the use of vent, using a hydrogen absorbing material or the use of a depolarizer.

b. Local Action: This is the gradual wearing away of the electrode due to impurities in the zinc plate. It can be controlled by the amalgamation of the zinc plate before it is used.

A box that is sliding across the floor experiences a net force of 10.0 N. If the box has a mass of 1.50 kg, what is the resulting acceleration of the box g

Answers

Answer:

a = 6.67 m/s²

Explanation:

F = 10.0 N

m = 1.50 kg

a = ?

F = ma

10.0 = (1.50)a

6.67 = a

What is the escape speed on a spherical asteroid whose radius is 517 km and whose gravitational acceleration at the surface is 0.636 m/s2

Answers

Answer:

810.94 m/s

Explanation:

Applying,

v = √(2gR)............. Equation 1

Where v = escape velocity of the spherical asteroid, g = acceleration due to gravity, R = radius of the earth

From the question,

Given: g = 0.636 m/s², R = 517 km = 517000 m

Substitute these values into equation 1

v = √(2×0.636×517000)

v = √(657624)

v = 810.94 m/s

Hence, the escape velocity is 810.94 m/s

Drag the titles to the correct boxes to complete the pairs.

Answers

Can you input a picture??
Other Questions
A uniform 1500-kg beam, 20.0 m long, supports a 15,000-kg printing press5.0 m from the right support column (Figure slide 8). Calculate the forceon each of the vertical support columns. question on the image (with the steps) Ammonia and oxygen react to form nitrogen monoxide and water. Construct your own balanced equation to determine the amount of NO and H2O that would form when 2.78 mol NH3 and 5.19 mol O2 react. Explain the difference between the movement of water molecules at room temperature and at 0 'C. the constitution provides for a federal system, which means the national government shares its powers with state governments. powers that are given to congress are called _ powers, and those given to the states are called _ . powers that are shared between the two are called _ powers1. reserved/enumerated/concurrent/executive 2.reserved/enumerated/concurrent/republican3.enumerated/reserved/concurrent/constituent choose one for each number please!! Situation:You invest $4,000 in an account thatpays an interest rate of 5.5%,compounded continuously.Calculate the balance of your account after 15years. Round your answer to the nearesthundredth. 15.18. Find the area of the region bounded byTCthe curve y = cosx, x=0, x= pi/2 and x-axis. Read the following sentence from the article: The most remarkable achievement of mission control was quickly developing procedures for powering up the CM after its long, cold sleep. This statement contains:personification.a simile.foreshadowing. a sample of unknown material weighs 500 n in air and 200 n when immesersed in alcholol with a specfic gravity of 0.7 what is the mass density 1 1/3 bushels of seed are needed to plant 1 acre of wheat. How many bushels of seed would be required to plant 30 acres? When someone has a mental illness caused by drugs, what is it called? Suppose there are three factories in Macroland and the following occurred in 2019: Metal, plastic and a car factory. Metal factory produces $200, plastic factory produces $500, and car factory produces $700, of its respective products. The metal factory sells all of its output to the car factory. The plastic factory sells $80 worth of plastic to the car factory, $20 to the government, and the rest to consumers. The Car factory exports $50 of its cars and sells the rest to consumers.Required:What is the GDP of Macroland in 2019? The correct order to follow for a technology awareness strategy is ____________________. Group of answer choices A sector of a circle of radius is 15Cm, and angle 216 degrees is bent to form a cone. What is base radius of the cone and the vertical height of the cone? Someone please help me On a horizontal number line, positive numbers are_____On a vertical number line, negative numbers are_______The number is_______ What is the mean of this data? 7,5,5,3,2,2 Of the 144 animals in the pet store, 56 are cats. The rest are dogs. What fraction of the pets are dogs? Need help on this! 10 points!!! Hey, I'm a Turk. What language do you speak? I'm very curious.