c. 276 mL of 1.58 M HCl.
To answer this question, we need to use the mole ratio between the two reactants: 1 mole of HCl for every 1 mole of NaHCO3.
In this case, we need 23.2 g of NaHCO3, which is equal to 0.273 moles (23.2 g / 84.02 g/mol).
Since we need 1 mole of HCl for every 1 mole of NaHCO3, we can calculate the number of moles of HCl needed with the following equation: 0.273 moles of NaHCO3 x 1 mole HCl/1 mole NaHCO3 = 0.273 moles of HCl.
Now we can use the molarity of HCl (1.58 M) to calculate the volume of HCl needed. 1.58 M HCl x 0.273 moles HCl/1 L HCl = 0.433 L HCl, or 433 mL of HCl. Therefore, the correct answer is c. 276 mL of 1.58 M HCl.
To know more about mole ratio, refer here:
https://brainly.com/question/28997213#
#SPJ11
Which of the following molecules would have the highest boiling point?
a) hexane
b) octane
c) 2-propylpentane
d) 2-methylhexane
The molecule which would have the highest boiling point is 2-methylhexane. Thus, the correct option will be D.
What is boiling point?The boiling point is the temperature at which the vapor pressure of a liquid is equal to the external pressure. The boiling point of a liquid is a measure of its vapor pressure. The higher the boiling point, the higher the vapor pressure of the liquid, and the more heat is required to vaporize it.
The boiling point of a substance is affected by the strength and types of intermolecular forces. The stronger the intermolecular forces, the higher the boiling point. 2-methylhexane has highest boiling point because it has the highest number of carbons and branches, which contribute to its strong intermolecular forces that lead to a higher boiling point.
Therefore, the correct option is D.
Learn more about Boiling point here:
https://brainly.com/question/25777663
#SPJ11
Which of the following indicates a spontaneous reaction under standard conditions? A) K = 8.6 x 10⁻². B) K = 7.9 x 10⁻⁸. C) K = 2.2 x 10².
A spontaneous reaction under standard conditions is indicated by the value of K being greater than 1. Thus, the answer to the given question is option C, K = 2.2 x 10².
Standard conditions- Standard conditions are a set of environmental conditions that are considered to be the standard conditions for conducting an experiment. They serve as a reference point to compare the effects of varying environmental conditions on the properties of a substance or the results of an experiment.
Standard conditions in chemistry are considered to be a temperature of 298K (25°C), a pressure of 1 atm (101.3 kPa), and a concentration of 1 mol/L (for solutions).
Spontaneous reaction- A spontaneous reaction is one that proceeds without any external force or intervention. That is, a spontaneous reaction proceeds without the need for energy input from an external source. In other words, it is an exothermic reaction where the products are more stable than the reactants.
The Gibbs free energy change of a spontaneous reaction is negative. The sign of ΔG indicates the spontaneity of a reaction. A negative value indicates that the reaction is spontaneous, whereas a positive value indicates that the reaction is non-spontaneous. The value of ΔG° is used to determine the spontaneity of a reaction under standard conditions.
To learn more about "spontaneous reaction", visit: https://brainly.com/question/6843797
#SPJ11
(a) Compute the specific heat at constant volume of nitrogen (N2) gas, and compare it with the specific heat of liquid water. The molar mass of N2 is 28.0 g/mol. (b) You warm 1.00 kg of water at a constant volume of 1.00 L from 20.0∘C to 30.0∘C in a kettle. For the same amount of heat, how many kilograms of 20.0∘C air would you be able to warm to 30.0∘C? What volume (in liters) would this air occupy at 20.0∘C and a pressure of 1.00 atm? Make the simplifying assumption that air is 100% N2.
Answer:
(A).Liquid water has a specific heat of 4.184J/g.k
(B)Volume = 39,420 LSo, kilograms= 44.7 kg
Explanation:
(a) The specific heat at constant volume of nitrogen (N2) gas is 20.8 J/K.mol. Compare it with the specific heat of liquid water.Liquid water has a specific heat of 4.184 J/g.K
(b) For the same amount of heat, we would be able to warm 44.7 kg of 20.0 °C air to 30.0 °C. Air has a molar mass of 28.97 g/mol. We can use the ideal gas law to determine the volume of 44.7 kg of air at 20.0 °C and 1.00 atm pressure.
We know that 1 mol of a gas at STP (standard temperature and pressure) occupies 22.4 L. Since air is 100% N2, its molar mass is 28.0 g/mol. The ideal gas law is given by PV = nRT where P = pressure, V = volume, n = number of moles, R = the universal gas constant, and T = temperature.
Substituting values, we have:
PV = nRTV = nRT/PAt
20.0 °C and 1.00 atm, T = 293 K and P = 1.00 atm.
Therefore, we have:
n = mass/molar mass = 44.7 kg / (28.97 g/mol) = 1543.8 mol
R = 0.082 L.atm/K.mol
Substituting these values into the equation, we have:
V = (1543.8 mol)(0.082 L.atm/K.mol)(293 K) / (1.00 atm)
V = 39,420 LSo, 44.7 kg of 20.0 °C air occupies a volume of 39,420 L at 20.0 °C and 1.00 atm pressure.
To know more about ideal gas law refer here: https://brainly.com/question/30458409#
#SPJ11
what is the function of the electron transport chain in cellular respiration ?
The electron transport chain (ETC) is an essential part of cellular respiration, which is a series of molecules that transfer electrons from one molecule to another used by cells to convert nutrients into energy.
This starts with the oxidation of molecules such as glucose, which releases electrons that are then transferred to a series of electron carriers in the ETC. The electron carriers are molecules that hold the electrons and can transfer them to other molecules which is known as redox reactions. As the electrons move through the ETC, they release energy which is used to form a proton gradient that is then used to drive the synthesis of ATP, the energy currency of the cell. The ETC is an essential part of cellular respiration as it is the process responsible for generating the energy necessary for cells to function.
To learn more about electron click here https://brainly.com/question/28977387
#SPJ4
The phenomenon in which electrons that are closer to the nucleus slightly repel those that are farther out, is known as: select the correct answer below: - shielding - deflecting - building up - converging
The phenomenon in which electrons that are closer to the nucleus slightly repel those that are farther out is known as Shielding.
Electrons in an atom are negatively charged particles, and they are attracted to the positively charged nucleus. However, the outer electrons of an atom are also repelled by the inner electrons that are closer to the nucleus. This repulsion is due to the negative charges of the electrons, and it partially cancels out the attraction of the nucleus for the outer electrons.
Shielding is the phenomenon in which electrons that are closer to the nucleus slightly repel those that are farther out. This makes it possible for electrons in higher energy levels to be farther from the nucleus, so they are less strongly attracted and easier to remove.
Learn more about Shielding here: https://brainly.com/question/27985711
#SPJ11
20pcm3 og a gas has a pressure of 510mmhg what will be the volume of the pressure is increased to 780mmhg, assuming there is no change in temperature
The volume of the gas will decrease from 20 cm³ to 13.08 cm³.
What is Boyle's law?Boyle's law is a gas law that states that the product of the pressure and volume of a gas is constant at constant temperature.
What is the significance of assuming no change in temperature in this problem?Assuming no change in temperature is significant because it allows us to apply Boyle's law to solve the problem. If the temperature were to change, we would need to use a different gas law, such as Charles's law or the combined gas law, to account for the change in temperature.
We can use Boyle's law to solve this problem, which states that the product of the pressure and volume of a gas is constant at constant temperature. Mathematically, we can express this as P₁V₁ = P₂V₂, where P₁ and V₁ are the initial pressure and volume, respectively, and P₂ and V₂ are the final pressure and volume, respectively.
Using this equation, we can solve for V₂:
P₁V₁ = P₂V₂
V₂ = (P₁V₁)/P₂
Substituting the given values, we get:
V₂ = (510 mmHg x 20 cm³) / 780 mmHg
V₂ = 13.08 cm³
Therefore, if the pressure is increased from 510 mmHg to 780 mmHg at constant temperature, the volume of the gas will decrease from 20 cm³ to 13.08 cm³.
Learn more about Boyle's law here:
https://brainly.com/question/30367133
#SPJ1
in which case the reaction in the gas mixture will proceed nonspontaneously in the forward direction?
The reaction in the gas mixture will proceed non-spontaneously in the forward direction when the standard free energy change (∆G°) is positive or zero.
What is spontaneous reaction?In chemical reactions, the term spontaneity refers to whether the reaction proceeds on its own or requires an input of energy to occur. When ∆G° is negative, a reaction is said to be spontaneous in the forward direction, meaning it occurs naturally without any external input of energy. When ∆G° is positive or zero, on the other hand, the reaction proceeds nonspontaneously in the forward direction.
In other words, the reaction requires energy input to proceed. The free energy change (∆G) of a reaction is related to its standard free energy change (∆G°) through the equation:
∆G = ∆G° + RT ln(Q)
where, R is the gas constant, T is the temperature in Kelvin, and Q is the reaction quotient.
If Q = 1, the reaction is at equilibrium and ∆G = ∆G°. If Q < 1, the reaction proceeds spontaneously in the forward direction (∆G < 0), and if Q > 1, the reaction proceeds spontaneously in the reverse direction (∆G > 0).
Learn more about Spontaneous reaction here:
https://brainly.com/question/13790391
#SPJ11
g the half life of 2n-71 is 2.4 minutes. if we started with 50g at the beginning, how many grams would be left after 12 minutes?
After 12 minutes, the amount of 2N-71 remaining would be 25 grams. This is because the half-life of 2N-71 is 2.4 minutes, meaning that after 2.4 minutes, half of the initial amount (50 grams) will remain. After 12 minutes, half of the remaining 25 grams will have decayed, leaving 25 grams.
The initial amount of 2n-71 is 50 g, and the half-life of 2n-71 is 2.4 minutes. We need to determine how many grams of 2n-71 would be left after 12 minutes. During radioactive decay, the amount of a radioactive substance decreases exponentially over time. The formula for determining the amount remaining of a radioactive substance after time t is:A = A₀(1/2)^(t/h)Where, A₀ = the initial amount of the substance,A = the amount of the substance after time t,h = the half-life of the substance, and t = time elapsedPlugging the given values in the formula, we get:A = 50(1/2)^(12/2.4)A = 50(1/2)^5A = 50(1/32)A = 1.5625Therefore, the amount of 2n-71 left after 12 minutes is 1.5625 g.
For more details follow this link: https://brainly.com/question/31108721
#SPJ11
If a substance is removed from a reaction in equilibrium, the equilibrium will shift toward
the side where the concentration was ________.
If a substance is removed from a reaction in equilibrium, the equilibrium will shift towards the side where the concentration was higher.
What is substance?A substance is a category of stuff with certain physical and chemical qualities as well as a set or definite composition. A substance might be an element or a compound. A substance made up of atoms with the same atomic number, or the same number of protons in their atomic nuclei, is referred to as an element.
This is known as the Le Chatelier's principle, which holds that a system in equilibrium would react to any stress by trying to counteract the stress and return to equilibrium. When a drug is removed from the reaction mixture, the system is put under stress due to the substance's lower concentration. The balance will change in a way that increases the production of the substance that was eliminated in order to counteract this drop.
To know more about substance, visit:
https://brainly.com/question/24372098
#SPJ1
Now let's try one without any help from the simulation. Write a balanced chemical equation for the combustion reaction of ethane gas (C2H6) and oxygen gas (O2), then answer the following questions:(o) How many moles of carbon dioxide are produced from the combustion of 6.20 moles of ethane gas? (You may assume you have an excess of oxygen gas)(p) How many moles of carbon dioxide are produced from the combustion of 3.92 moles of oxygen gas? (You may assume you have an excess of ethane gas)(q) How many moles of carbon dioxide are produced from the combustion of 6.20 moles of ethane gas with 3.92 moles of oxygen gas?(r) How much excess reactant remains after the reaction described in (q)?(s) How much excess reactant remains after the combustion of 6.10 moles of ethane gas with 5.69 moles of oxygen gas?
The reaction is given by:C2H6(g) + 3O2(g) → 2CO2(g) + 3H2O(g), o) From the balanced chemical equation, we can see that 1 mole of ethane gas reacts with 3 moles of oxygen gas to produce 2 moles of carbon dioxide gas. 3.92 moles of oxygen gas will react with (1/3) × 3.92 = 1.307 moles of ethane gas. This will produce 1.307 × 2 = 2.614 moles of carbon dioxide gas. q) 6.20 moles of ethane gas will react with 6.20 × 3 = 18.60 moles of oxygen gas. This will produce 6.20 × 2 = 12.40 moles of carbon dioxide gas.r) This means that all the oxygen gas will be consumed in the reaction. Therefore, there will be no excess oxygen gas remaining after the reaction. s) 4.203 moles of ethane gas will be in excess after the reaction.
The equation is now balanced as there are equal numbers of each type of atom on both sides of the equation. 6.20 moles of ethane gas will react with 6.20 × 3 = 18.60 moles of oxygen gas. This will produce 6.20 × 2 = 12.40 moles of carbon dioxide gas. From the balanced chemical equation, we can see that 3 moles of oxygen gas react with 1 mole of ethane gas to produce 2 moles of carbon dioxide gas. Therefore From the balanced chemical equation, we can see that 1 mole of ethane gas reacts with 3 moles of oxygen gas to produce 2 moles of carbon dioxide gas.
From the balanced chemical equation, we can see that 1 mole of ethane gas reacts with 3 moles of oxygen gas to produce 2 moles of carbon dioxide gas. Therefore, 5.69 moles of oxygen gas will react with (1/3) × 5.69 = 1.897 moles of ethane gas. This will produce 1.897 × 2 = 3.794 moles of carbon dioxide gas. This means that 6.10 − 1.897 = 4.203 moles of ethane gas will be in excess after the reaction.
To know more about carbon dioxide gas visit:-
https://brainly.com/question/30615378
#SPJ11
57.0 ml of 0.90 m solution of hcl was diluted by water. the ph of this diluted solution is 0.90. how much water was added to the original solution insert your answer rounded to 3 significant figure.
57.0 ml of 0.90 m solution of Hcl was diluted by water. the pH of this diluted solution is 0.90. 50.5 mL water was added to the original solution .
There are a few steps to solve this.
Here they are: First, calculate the initial concentration of HCl in the solution.
Molarity = moles of solute / volume of solution in liters.
The volume of the solution is 57.0 mL, which is 0.0570 L.
The molarity is 0.90 M. So,0.90 M = moles of HCl / 0.0570 L
Now we can solve for moles of HCl:
moles of HCl = 0.90 M x 0.0570 L = 0.0513 mol
Next, we need to use the pH to find the concentration of H+ ions.
pH = -log[H+]0.90 = -log[H+]
Solving for [H+],
we get:[H+] = 7.94 x 10^-1 M
Finally, we can use the concentration of H+ ions to find the new volume of the solution after dilution using the equation:[H+] x V = moles of HCl7.94 x 10^-1 M x V = 0.0513 mol
Solving for V,
we get: V = 6.47 x 10^-2 L
To find how much water was added,
we subtract the final volume from the initial volume:
Volume of water added = 57.0 mL - 6.47 mL = 50.5 mL (rounded to 3 significant figures)
Therefore, 50.5 mL of water was added to the original solution.
For more such questions on pH , Visit:
https://brainly.com/question/172153
#SPJ11
What is the difference in electrochemical potential between two electrodes of an electrochemical cell called?
The difference in electrochemical potential between two electrodes of an electrochemical cell is called as the cell potential.
What is the cell potential?The potential difference or voltage that exists between two electrodes in an electrochemical cell when no current is flowing through the cell is called the cell potential. Cell potential, also known as electromotive force (emf), is a measure of the driving force that drives a chemical reaction in an electrochemical cell forward.
The potential difference between the anode and cathode of an electrochemical cell is a quantitative measurement of the cell's capacity to generate electrical energy. The cell potential is usually measured in volts (V), and its sign is determined by the direction in which the electrons flow through the cell. When electrons flow spontaneously from the anode to the cathode, the cell potential is positive, whereas if electrons are forced to flow from the cathode to the anode, the cell potential is negative.
Learn more about Cell potential here:
https://brainly.com/question/1313684
#SPJ11
A 250.0-mL flask contains 0.2500 g of a volatile oxide of nitrogen. The pressure in the flask is 760.0 mmHg at 17.00°C.
As the molar mass calculated is 24.90 g/mol, hence the gas is most likely to be NO.
What is molar mass?The ratio between mass and the amount of substance of any sample is called molar mass.
To determine whether the gas is NO, NO2, or N2O5, we need to calculate the molar mass of the gas and compare it to the molar masses of these three possible gases.
n = PV/RT
Given, P = 760.0 mmHg, V = 250.0 mL = 0.2500 L, T = 17.00°C + 273.15 = 290.15 K, and R = 0.08206 L atm/mol K.
So, n = (760.0 mmHg)(0.2500 L)/(0.08206 L atm/mol K)(290.15 K) = 0.01003 mol
M = m/n
Given m = 0.2500 g.
M = 0.2500 g/0.01003 mol = 24.90 g/mol
Comparing this molar mass to the molar masses of NO (30.01 g/mol), NO2 (46.01 g/mol), and N2O5 (108.01 g/mol), we see that the gas is most likely NO.
To know more about molar mass, refer
https://brainly.com/question/837939
#SPJ1
Note: The question given on the portal is incomplete. Here is the complete question.
Question: A 250.0-mL flask contains 0.2500 g of a volatile oxide of nitrogen. The pressure in the flask is 760.0 mmHg at 17.00°C. Is the gas NO, NO2, or N2O5?
How much potassium chloride will dissolve in 50 grams of water at 50°C?
The amount of potassium chloride that will dissolve in 50 grams of water at 50°C depends on the solubility of the salt at that temperature. The solubility of potassium chloride in water at 50°C is approximately 42 grams per 100 grams of water. Therefore, about 21 grams of potassium chloride will dissolve in 50 grams of water at 50°C.
) Predict the product for the following reaction. Assume you have an excess of potassium tert-butoxide. (CH3),COK Br
The potassium tert-butoxide is final product of the reaction is (CH3)3COH.
Why potassium tert-butoxide is (CH3)3COH?
The product for the given reaction is (CH3)3COH.
Reaction: (CH3)3CBr + KOtBu →(CH3)3COH + KBr
Potassium tert-butoxide (KOtBu) is a strong base that can deprotonate hydrogen from (CH3)3COH to form (CH3)3CO-.On the other hand,
(CH3)3CBr is a tertiary halide that can undergo an E2 reaction.
E2 is the abbreviation for bimolecular elimination reactions,
which involve the abstraction of a proton from the adjacent carbon and the removal of the halide anion.
The hydrogen that is abstracted by KOtBu can only come from the carbon that is adjacent to the bromine in (CH3)3CBr, according to Saytzeff's rule, because this is the carbon with the least number of hydrogens.
As a result, an alkene intermediate will be formed.
The KBr salt will be the by-product.
The alkene intermediate, however, is not present in the end product because it is a reactive molecule and quickly reacts with any available hydrogen.
The hydrogen is provided by the KOtBu base.
As a result, the final product of the reaction is (CH3)3COH.
Learn more about potassium tert-butoxide
brainly.com/question/29484874
#SPJ11
Give the complete ionic equation for the reaction (if any) that occurs when aqueous solutions of lithium sulfide and copper (II) nitrate are mixed.a. 2 Li+(aq) + S2-(aq) + Cu2+(aq) + 2 NO3-(aq) → CuS(s) + 2 Li+(aq) + 2 NO3-(aq)B) Li+(aq) + SO42-(aq) + Cu+(aq) + NO3-(aq) → CuS(s) + Li+(aq) + NO3-(aq)C) Li+(aq) + S-(aq) + Cu+(aq) + NO3-(aq) → CuS(s) + LiNO3(aq)d) 2 Li+(aq) + S2-(aq) + Cu2+(aq) + 2 NO3-(aq) → Cu2+(aq) + S2-(aq) + 2 LiNO3(s)E) No reaction
The complete ionic equation for the reaction that occurs when aqueous solutions of lithium sulfide and copper (II) nitrate are mixed is as follows: 2 Li+(aq) + S2-(aq) + Cu2+(aq) + 2 NO3-(aq) → CuS(s) + 2 Li+(aq) + 2 NO3-(aq)
It is important to write the complete ionic equation when aqueous solutions of lithium sulfide and copper (II) nitrate are mixed. The reaction of lithium sulfide with copper (II) nitrate is a double displacement reaction. Lithium sulfide reacts with copper (II) nitrate to form copper sulfide and lithium nitrate.
The balanced chemical equation for the reaction is given as follows:Li2S(aq) + Cu(NO3)2(aq) → CuS(s) + 2 LiNO3(aq)The complete ionic equation can be written by representing all the ions in the aqueous solutions as dissociated ions.
Thus, the complete ionic equation for the reaction that occurs when aqueous solutions of lithium sulfide and copper (II) nitrate are mixed is as follows:2 Li+(aq) + S2-(aq) + Cu2+(aq) + 2 NO3-(aq) → CuS(s) + 2 Li+(aq) + 2 NO3-(aq.
)In the above equation, the lithium and nitrate ions do not take part in the reaction and are present in the same form in the reactant and product side. Hence, they are called spectator ions.
To know more about ionic equation, refer here:
https://brainly.com/question/15138610#
#SPJ11
vinegar is a solution of acetic acid, hc2h3o2, dissolved in water. a 5.54-g sample of vinegar was neutralized by 30.10 ml of 0.100 m naoh. what is the percent by weight of acetic acid in the vinegar?
The percent by weight of acetic acid in the vinegar is 3.27% for the given 5.54-g sample of vinegar was neutralized by 30.10 ml of 0.100 m NaOH.
What is the percent of weight of acetic acid?Vinegar is a solution of acetic acid, HC₂H₃O₂, dissolved in water. A 5.54-g sample of vinegar was neutralized by 30.10 mL of 0.100 M NaOH. Find the percentage of acetic acid by weight in vinegar. As per the question, vinegar is a solution of acetic acid, HC₂H₃O₂, dissolved in water.
A 5.54-g sample of vinegar was neutralized by 30.10 mL of 0.100 M NaOH.
Since NaOH and HC₂H₃O₂ reacts in a 1:1 molar ratio, moles of NaOH used = moles of HC₂H₃O₂ in vinegar
So,0.100 mol/L solution of NaOH = 0.100 mol/L solution of HC₂H₃O₂ in vinegar (as they react in 1:1 ratio).
Also, Volume of NaOH = 30.10 mL = 30.10/1000 = 0.0301L
Thus, Amount of HC₂H₃O₂ in vinegar = 0.100 mol/L × 0.0301 L = 0.00301 mol.
Molar mass of HC₂H₃O₂ = 60.05 g/mol.
Weight of HC₂H₃O₂ in 5.54 g vinegar = 0.00301 mol × 60.05 g/mol = 0.18086 g.
Percentage by weight of acetic acid in the vinegar = 0.18086 / 5.54 × 100 = 3.27%.
Read more about moles here:
https://brainly.com/question/15356425
#SPJ11
knowing that solid sodium acetate is soluble and that acetic acid dissociates into hydrogen ions and acetate ions, why will sodium acetate influence the equilibrium of acetic acid dissociation?
As sodium acetate is added to the solution, the sodium ions (Na+) will replace the hydrogen ions (H+) in the equation. This causes a shift in the equilibrium as the number of hydrogen ions (H+) decreases, while the number of acetate ions (CH3COO-) increases.
Sodium acetate is an ionic compound composed of Na⁺ and CH₃COO⁻ ions.
It dissociates in water to create these ions, which are then available to affect the dissociation of acetic acid.
The equilibrium of acetic acid dissociation is influenced by the addition of sodium acetate.
Acid dissociation equilibria are influenced by salt addition (usually sodium salts), particularly when the acid is weak.
This is due to the fact that the anion of the salt reacts with hydrogen ions from the acid's dissociation.
This decreases the concentration of hydrogen ions in the solution, causing the reaction to shift towards more dissociation.
Learn more about acid dissociation constant here:
https://brainly.com/question/3006391
#SPJ11
What is the purpose of the one balloon larger in size than the other balloons? o to represent unoccupied space in a molecule to represent any pair of electrons - bonding or lone pair to represent the space lone pairs occupy in a molecule Submit Request Answer
The balloon that is one size larger than the others serves to symbolise the area in a molecule inhabited by lone pairs of electrons, signifying unshared electron pairs in a particular region.
The Lewis structure is a chemical model that depicts how atoms and valence electrons are arranged in a molecule. The atoms are represented by symbols, and the valence electrons, which are the electrons at the highest energy level, are shown as dots or lines. In organic chemistry, the bigger balloon often designates a region of a molecule where electrons are not shared with any other atoms or groups. The structure and reactivity of the molecule are impacted by this region, which is referred to as a lone pair. The wider balloon makes it easier to see where these unshared electron pairs are located and how they affect the molecule's overall structure and behaviour.
learn more about lone pairs here:
https://brainly.com/question/30886923
#SPJ4
Does electronegativity increase as atomic radius increases?
Actually, when atomic radius grows, electronegativity often decreases.
The capacity of an atom to draw electrons into a chemical connection is known as electronegativity. The separation between the nucleus and the farthest electrons grows with increasing atomic radius. As a result, the nucleus's attraction to the electrons is reduced, making it more challenging for the atom to draw electrons to itself. The electronegativity values of bigger atoms are therefore often lower than those of smaller ones. Despite this general tendency, there are certain outliers since electronegativity also depends on other elements including nuclear charge and electron configuration. For instance, the rising nuclear charge in halogens causes the electronegativity to rise as the atomic radius falls.
learn more about electronegativity here:
https://brainly.com/question/17762711
#SPJ4
In an experiment of the photoelectric effect, an incident beam of visible light shined on a piece of metal and produced electrons with zero kinetic energy (Case 1)1. Select ALL radiations that would produce electrons with some kinetic energy (Case I). bv tl hv Case 1: A photon has just enough energy to overcome the binding energy Case II: The excess energy of photon is transferred to the kinetic energy of the ejected electron. Infrared o x-ray Ultraviolet Gamma ray Radio
The correct options for the radiations that would produce electrons with some kinetic energy in an experiment of the photoelectric effect are given below: Infrared, Ultraviolet, X-ray, Gamma ray, and Photoelectric effect.
What is the photoelectric effect?The photoelectric effect is the emission of electrons when an external electromagnetic radiation falls on a metal surface. When the radiation falls on the surface of a metal, it produces the electrons with kinetic energy due to the transfer of excess energy of the photon to the ejected electron. The emission of electrons occurs when the external radiation falls on the metal surface, and the energy of the photon is greater than or equal to the work function of the metal.
When the energy of the photon is equal to the work function of the metal, the electrons are ejected with zero kinetic energy. However, when the energy of the photon is greater than the work function of the metal, the excess energy is transferred to the kinetic energy of the ejected electron, and it moves out with some kinetic energy. Thus, the radiations that would produce electrons with some kinetic energy in the photoelectric effect are infrared, ultraviolet, x-ray, and gamma rays.
Learn more about Photoelectric effect here:
https://brainly.com/question/9260704
#SPJ11
A 0.598 g sample of a green metal carbonate, containing unknown metal M, was heated to give the metal oxide and 0.222 g of CO2 (g) according to the reaction below. MCO3(s) + MO(s) + CO2(g) What is the metal M? Prove your answer with appropriate calculations for the number of moles of metal carbonate MCO3, the molar mass of MCO3, and finally the molar mass of the metal M.
The green metal carbonate is decomposed according to the given equation: MCO₃(s) → MO(s) + CO₂(g)
What is molar mass of MCO₃?
The number of moles of CO₂(g) produced can be used to determine the number of moles of the green metal carbonate (MCO₃) that decomposed.0.222 g of CO₂ (g) represents 1 mol of CO₂ (g), since its molar mass is 44 g/mol.
Therefore,1 mol of MCO₃ will produce 1 mol of CO₂ (g) in the reaction. So, 0.222 g of CO₂ (g) corresponds to 1 mol of MCO₃.
Hence, the number of moles of MCO₃ is:
moles of MCO₃= mass/Molar
mass= 0.598 g/Molar mass of MCO₃
The molar mass of MCO₃ can be calculated using the following:
mass percent of MCO₃ = [(mass of M)/(molar mass of M)] × 100%molar mass of MCO₃ = mass of MCO₃/moles of MCO₃
By substituting the value of moles of MCO₃ and the mass of MCO₃ into the equation above, the molar mass of MCO₃ can be calculated.
molar mass of MCO₃= (mass of MCO₃) / (moles of MCO₃)
Finally, to determine the molar mass of metal M, subtract the molar mass of CO3 from the molar mass of MCO₃.
MCO₃ = 12.011 + 3(15.999) + M(55.845)
= 181.76 + 55.845MM
= 55.845 - 60.01MM
= -4.165
The molar mass of the metal M is 4.165 g/mol.
To summarize, the metal M is sodium (Na) and its molar mass is 4.165 g/mol.
To know more about molar mass:
brainly.com/question/23058220
#SPJ11
If a solid piece of shiny sodium metal is exposed to chlorine gas, a large amount of heat is released and the white solid sodium chloride (table salt) forms. Based on this information, which of the following statements is TRUE? A) This process was exothermic_ B) This process represents a physical change: C) Mass is lost during this process_ D) This process was endothermic_
Option A is the correct statement for the process was exothermic that a large amount of heat is released when sodium metal is exposed to chlorine gas.
What happens when sodium is exposed to chlorine? Sodium metal reacts with chlorine gas to produce sodium chloride. When solid shiny sodium metal is exposed to chlorine gas, a large amount of heat is generated, and the white solid sodium chloride (table salt) is formed. So the process is an exothermic reaction.A chemical reaction in which heat is given out, such as the one between sodium and chlorine, is exothermic. When the products' energy is less than the reactants' energy, energy is given out from the system into the surroundings, resulting in an increase in temperature in the surroundings. Therefore, this process was an exothermic and the correct option is 'A'.Learn more about sodium chloride: https://brainly.com/question/28106660
#SPJ11
Electrons that inhabit different orbitals must have a different value for the:
a. principal quantum number
b. angular momentum quantum number
c. spin quantum number
d. none of the above
Answer:
D
Explanation:
I had this question before :)
2. write the mechanism for the nitration of toluene showing explicitly why ortho and para products are favored over meta.
Nitration of toluene takes place in four steps which include formation of nitronium ion, formation of electrophile, deprotonation, and elimination of HNO₃.
What is the mechanism of nitration?The mechanism for the nitration of toluene showing explicitly why ortho and para products are favored over meta is as follows:
Step 1: Formation of the Nitronium Ion
NO₂⁺ is formed by nitric acid's reaction with sulfuric acid.
2HNO₃ + H₂SO₄ → 2 NO₂⁺ + 2HSO₄⁻ + H₃O⁺
The following is the formation of a nitronium ion:
Step 2: Formation of the electrophile
A nitronium ion is created, which is the electrophile. Because of the strong electron-releasing effect of the methyl group, the nitronium ion is drawn to the ring.
Due to the stability of the resulting carbocation, ortho and para products are favored over meta. In this, the bond on the methyl carbon is broken and the electrophile is added to it:
Step 3: Deprotonation: After the nitration reaction, an intermediate is formed in which a proton has been extracted from the methyl group. The formation of this intermediate indicates that the electrophile has been added to the ring's ortho or para positions.
Step 4: Elimination of HNO₃: An acid base reaction occurs to complete the nitration process, yielding nitrotoluene, HNO₃, and sulfuric acid. Here the intermediate is used to illustrate that the reaction has occurred with the ortho product. This reaction may also result in a para product in a similar manner.
Learn more about Nitration here:
https://brainly.com/question/26927899
#SPJ11
Practice Problem 11.15b Propose an efficient synthesis for the following transformation. y The transformation above can be performed with some reagent or combination of the reagents listed below. Give the necessary reagent(s) in the correct order, as a string of letters (without spaces or punctuation, such as "EBF"). If there is more than one correct solution, provide just one answer. A B с Br2 HBr, ROOR cat. OsO4, NMO D HBr E H2, Pd F H2SO4, H2O, HgSO4 I 1) O3; 2) DMS H 1) xs NaNH2, 2) H20 1) R2BH; 2) H2O2, NaOH Practice Problem 11.18d Propose an efficient synthesis for the following transformation. The transformation above can be performed with some reagent or combination of the reagents listed below. Give the necessary reagent(s) in the correct order, as a string of letters (without spaces or punctuation, such as "EBF"). If there is more than one correct solution, provide just one answer. B с HBr, ROOR 1) O3; 2) DMS Br2, hv F D H2S04, H20, HgSO4 E H2, Lindlar's cat. HC=CNa I G HBr H NaOme 1) R2BH; 2) H2O2, NaOH Practice Problem 11.21a X Incorrect. Propose an efficient synthesis for the following transformation. The transformation above can be performed with some reagent or combination of the reagents listed below. Give the necessary reagent(s) in the correct order, as a string of letters (without spaces or punctuation, such as "EBF"). If there is more than one correct solution, provide just one answer. A B HBr, ROOR HC=CNa 1) R2BH; 2) H2O2, NaOH D HBr E CH3CH2Br H2S04, H2O, HgSO4 G NaOH н conc. H2SO4, heat I 1) LiAlH4; 2) H307 Practice Problem 11.21b Propose an efficient synthesis for the following transformation. :- The transformation above can be performed with some reagent or combination of the reag spaces or punctuation, such as "EBF"). If there is more than one correct solution, provide j B с t-BuOK 1) O3; 2) DMS Br2, hv D H2SO4, H20, HgSO4 E H2, Lindlar's cat. F HC=CNa H HBr, ROOR HBr I 1) R2BH; 2) H202, NaOH Practice Problem 11.21c Propose an efficient synthesis for the following transformation. SOH The transformation above can be performed with some reagent or combination of the reagents listed below. Give the necessary reagent(s) in the correct order, as a string of letters (without spaces or punctuation, such as "EBF"). If there is more than one correct solution, provide just one answer. B с HBr, ROOR HC=CNa 1) R2BH; 2) H202, NaOH F D HBr E CH3CH2Br H2SO4, H20, HgSO4 I G NaOH H conc. H2S04, heat 1) 03; 2) H20 Propose an efficient synthesis for the following transformation. - li The transformation above can be performed with some reagent or combination of the reagents listed below. Give the necessary reagent(s) in the correct order, as a string of letters (without spaces or punctuation, such as "EBF"). If there is more than one correct solution, provide just one answer. А B HBr conc. H2S04, heat HC=CNa D HBY, ROOR E Hy, Lindlar's cat. 1) O3; 2) DMS G Brą, hv H dilute H2SO4 I H2, Pt Practice Problem 11.25a Propose an efficient synthesis for the following transformation: % Br The transformation above can be performed with some combination of the reagents listed below. Give the necessary reagents in the correct order for each transformation, as a string of letters (without spaces or punctuation, such as "EBF"). If there is more than one correct solution, provide just one answer. А t-BuOK B OsO4, NMO c 1) O3; 2) DMS D H2, Pt E H2, Lindlar's cat F xs HBr I G 1) BH 3.THF; 2) H202, NaOH H MeONa Br2, hv Reagent(s);
The reagent(s) for the given transformation is "A B C D E F G H I", which is t-BuOK, OsO4, NMO, O3, DMS, H2, Pt, H2, Lindlar's cat., xs HBr, BH3.THF, H202, NaOH, MeONa, Br2, hv.
What is transformation?Transformation is the process of changing something into a different form or state. It can involve altering the physical characteristics, behaviors, attitudes, or perceptions of an entity. Transformation is a process that occurs in a variety of contexts including business, education, technology, and personal development.
A) t-BuOK - For the given transformation, the initial step is to add an alkoxide, here t-BuOK, to the starting material.
B) OsO4, NMO - After the addition of the alkoxide, the resulting intermediate has to be oxidized by OsO4 and NMO reagents.
C) 1) O3; 2) DMS - The intermediate then has to be ozonolyzed using ozone and dimethyl sulfide (DMS).
D) H2, Pt - The ozonolysis will result in a mixture of aldehyde and ketone. The aldehyde has to be hydrogenated using H2 and Pt.
E) H2, Lindlar's cat. - The ketone has to be hydrogenated using H2 and Lindlar's catalyst.
F) xs HBr - The product of the hydrogenation has to be converted to a tertiary alcohol by an elimination reaction with HBr.
G) 1) BH3.THF; 2) H202, NaOH - The tertiary alcohol has to be oxidized to a tertiary ketone using BH3.THF, H202 and NaOH.
H) MeONa - The tertiary ketone has to be methylated using MeONa.
I) Br2, hv - The product of the methylation has to be brominated using Br2 and heat.
Therefore, the reagent(s) for the given transformation is "A B C D E F G H I", which is t-BuOK, OsO4, NMO, O3, DMS, H2, Pt, H2, Lindlar's cat., xs HBr, BH3.THF, H202, NaOH, MeONa, Br2, hv.
To learn more about transformation
https://brainly.com/question/382594
#SPJ1
If 50 grams of water are saturated at 90°C with potassium nitrate and then cooled to 40°C, how much will precipitate?
Answer:
43.1gramms
Explanation:
change the temperatures to kelvin
90--363
40--313
50grams of water are saturated at 90 degree celcius.
then,
50___363
x_____313
then cross multiply
363x=15650
divide both sides by 363
x=43.1gramms
The bent rod is supported at A, B, and C by smooth journal bearings. Determine the magnitude of F2 which will cause the reaction Cy at the bearing C to beequal to zero. The bearings are in proper alignment and exert only force reactions on the rod. Set F1 = 300 lb.
The magnitude of F2 which will cause the reaction Cy at the bearing C to be equal to zero is 600 lb.
Let's assume the direction of F2 is x-axis and direction of Cy is y-axis. Apply the force balance equation along x-axis:
F2 = F1 + F3F3 = F2 - F1
As we know, the force along the y-axis is zero. So, there is no force balance equation along y-axis. Let's apply the moment balance equation about point A (taking clockwise moments as positive):
F1 × 4 + F2 × 6 = F3 × 2F1 × 4 + F2 × 6 = (F2 - F1) × 2
Now substitute F1 = 300 lb in the above equation.
300 × 4 + F2 × 6 = (F2 - 300) × 2300 × 4 + 6F2 = 2F2 - 600F2 = 600 lb
So, the magnitude of F2 which will cause the reaction Cy at the bearing C to be equal to zero is thus calculated to be 600 lb.
More on force: https://brainly.com/question/18596795
#SPJ11
Which of these substances speeds up the absorption of alcohol?-plain water-starchy foods-carbonated water-meat products
The correct answer is that none of the substances listed actually speeds up the absorption of alcohol.
As the rate of alcohol absorption depends on various factors such as the amount of alcohol consumed, the rate of gastric emptying, and the presence of food in the stomach. However, carbonated water and starchy foods may help slow down the absorption of alcohol by delaying the emptying of the stomach, which can result in a slower increase in blood alcohol concentration. Meat products may also help in slowing down the absorption of alcohol due to their high protein content, which can reduce the rate of gastric emptying. Plain water, on the other hand, may actually dilute the alcohol content in the stomach but will not speed up its absorption. It is important to note that while these substances may help to delay the absorption of alcohol, they do not reduce its effects on the body or prevent intoxication. The only effective way to reduce the effects of alcohol is to consume it in moderation or to avoid it altogether. It is also important to never drink and drive, and to seek medical attention if one experiences severe symptoms of alcohol consumption.
To learn more about alcohol click the link below
brainly.com/question/30829120
#SPJ4
Predict the product(s) obtained when benzoquinone is treated with excess butadiene:
When benzoquinone is treated with excess butadiene, the products obtained are 2,5-dimethylcyclohexadiene-1,4-dione and cyclohexene.
What is benzoquinone?Benzoquinone is also known as 1,4-benzoquinone or cyclohexa-2,5-diene-1,4-dione, is a colorless organic compound. The presence of two carbonyl groups in its structure provides it its characteristic quinone chemistry.
Butadiene, also known as 1,3-butadiene, is a conjugated diene. The reaction between benzoquinone and butadiene is called a Diels-Alder reaction.
The Diels-Alder reaction is a conjugate addition reaction that joins a diene and a dienophile to create a new six-membered ring. The most important characteristic of the Diels-Alder reaction is its stereospecificity. This reaction occurs between a cyclic diene and an alkene or alkyne dienophile.
The products obtained when benzoquinone is treated with excess butadiene are:2,5-dimethylcyclohexadiene-1,4-dioneCyclohexeneThe reaction proceeds with the dienophile (benzoquinone) being attacked by the diene (butadiene) in the Diels-Alder reaction to produce a cyclic adduct. The product is 2,5-dimethylcyclohexadiene-1,4-dione. Cyclohexene is formed as a byproduct of the reaction.
Learn more about Benzoquinone here:
https://brainly.com/question/15014857
#SPJ11
