three potential employees took an aptitude test. each person took a different version of the test. the scores are reported below. kaitlyn got a score of 74.5 ; this version has a mean of 68.5 and a standard deviation of 12 . kiersten got a score of 244.8 ; this version has a mean of 210 and a standard deviation of 29 . rebecca got a score of 7.24 ; this version has a mean of 6.7 and a standard deviation of 0.3 . if the company has only one position to fill and prefers to fill it with the applicant who performed best on the aptitude test, which of the applicants should be offered the job?

The hypotheses for a chi-square test of independence on the data that auditors compared opinions about treatment (very good/acceptable/poor) at four VA hospitals (labeled a,b,c,d) among veterans aged 50 and above are:

Null hypothesis, H0: There is no association between the opinions about treatment of the VA hospitals and veterans aged 50 and above.

Alternative hypothesis, Ha: There is an association between the opinions about treatment of the VA hospitals and veterans aged 50 and above.

Hypothesis Testing is a type of statistical analysis in which you put your assumptions about a population parameter to the test. It is used to estimate the relationship between 2 statistical variables.

An analyst performs hypothesis testing on a statistical sample to present evidence of the plausibility of the null hypothesis. Measurements and analyses are conducted on a random sample of the population to test a theory. Analysts use a random population sample to test two hypotheses: the null and alternative hypotheses.

To learn more about null and alternative hypothesis refer :

https://brainly.com/question/27335001

#SPJ11

The two-period moving average model and the two-period weighted moving average model are both common forecasting methods used to predict future demand. and we understand that the model with the lower MAD and MSE values will have the most accurate forecast.

To determine which model is better for this particular data set, we need to compare the accuracy of each model. To do this, we will calculate the Mean Absolute Deviation (MAD) and the Mean Squared Error (MSE) for each model.
For the two-period moving average model, we can calculate the forecast for period 7 by taking the average of p5 and 6:

Period 7 forecast = (Gallons in Period 5 + Gallons in Period 6)/2

For the two-period weighted moving average model, we can calculate the forecast for period 7 by using the weights of 0.6 and 0.4:

Period 7 forecast = (0.6 x Gallons in Period 5) + (0.4 x Gallons in Period 6)

We can then compare the accuracy of each model by calculating the MAD and MSE. To calculate MAD, we need to subtract the actual demand in each period from the forecasted demand and take the absolute value:

MAD = |Actual demand – Forecasted demand|

To calculate MSE, we need to square the differences between the actual demand and the forecasted demand:

MSE = (Actual demand – Forecasted demand)^2

After calculating the MAD and MSE for each model, we can compare the results to determine which model is better for this data set. The model with the lower MAD and MSE values will have the most accurate forecast.

For more such questions on forecast

https://brainly.com/question/24730207

#SPJ11

1.4m/s is the rate that Roberto is walking. We know the formula for calculating the time i.e. t= d/r.

The term "distance" refers to how far we move. The rate is a measurement of our trip speed. Time is measured by how far we travel. The distance an object will travel over time and at a specific average rate is the subject of rate problems.

Given,

Distance = D

D= 1.4t

Rate= ?

Substituting the given values in the formula t= d/r

where,

t= time in seconds

d= distance

r= rate

We get,

t= 1.4t/r

t/1.4t= 1/r

t gets cancelled

so we have,

1/1.4= 1/r

r= 1.4m/s

Therefore, 1.4m/s is the rate at which Roberto is walking.

Learn more about Rate here: brainly.com/question/29781084

#SPJ4

The complete question is as follows:

Roberto is walking. The distance, D, in meters, he walks can be found using the equation D=1. 4t, where t is time in seconds.

What is the rate that Roberto's walking in meters per second?

Answer:

The sequence is defined as follows:

a1 = 5

an = an-1 - 5, for n > 1

Using this definition, we can find the first four terms of the sequence as follows:

a1 = 5

a2 = a1 - 5 = 5 - 5 = 0

a3 = a2 - 5 = 0 - 5 = -5

a4 = a3 - 5 = -5 - 5 = -10

Therefore, the first four terms of the sequence are: 5, 0, -5, -10.

Answer:

Step-by-step explanation:

C.) P = 3(a+2)-4

The formula which describes the relation between the height of the apple tree and the height of the pine tree p is P=3(a+2)-4, the correct option is C.

A linear equation is an equation that has the variable of the highest power of 1. The standard form of a linear equation is of the form Ax + B = 0.

We are given that;

Growth of apple tree= 2feet

Now,

Let's call the original height of the apple tree "h". According to the problem, if the apple tree grew 2 feet and then tripled its height, it would become 4 feet shorter than the pine tree. So we can write:

3(h+2) - 4 = p

Simplifying, we get:

3h + 2 = p

Now we can see that option (D) P=3a+10 is very similar to our expression, but it has a constant term of 10 instead of 2. This constant term does not match the problem statement, which says that the apple tree would be 4 feet shorter than the pine tree, not taller. Therefore, option (D) is not the correct answer.

Option (A) P-4=3a+2 also does not match the problem statement. If we solve for p, we get:

P = 3a + 6

This means that the apple tree would be 6 feet shorter than the pine tree, not 4 feet shorter as stated in the problem.

Option (B) P=2(a+3)+4 also does not match the problem statement. If we solve for p, we get:

P = 2a + 10

This means that the apple tree would be 10 feet shorter than the pine tree, not 4 feet shorter as stated in the problem.

Option (C) P=3(a+2)-4 matches our expression from earlier. If we solve for p, we get:

P = 3a + 2

Therefore, by equation the answer will be P=3(a+2)-4.

Learn more about linear equations;

https://brainly.com/question/10413253

#SPJ2

In order to make the same amount of money, they would have to each sell 5 bicycles. They would both make $500

To find the number of bicycles they would need to sell to make the same amount of money,

We can set Jim's and Tom's weekly earnings equal to each other and solve for the number of bicycles:

250 + 50x = 400 + 20x

30x = 150

x = 5

So they would need to sell 5 bicycles to make the same amount of money.

To find out how much money they would make for selling 5 bicycles, we can substitute x = 5 into either equation.

Let's use Jim's equation:

250 + 50(5) = 500

So they would make $500 for selling 5 bicycles.

Read more about linear relation at

https://brainly.com/question/4074386

#SPJ1

a) The constant k is 5.427 x 10^−12 and its natural logarithm is -26.68.

b) The mean salary of the given model by using the probability density function is approximately $270.86.

a) The cumulative distribution function of the given random variable is provided as follows:

F(x) = {1−kx^−3 if x>44000, and 0 otherwise

The cumulative distribution function is given as

F(x) = 1−kx^−3 if x>44000 and F(x) = 0, if x≤44000i)

We need to check the value of the cumulative distribution function at 44000

We have, F(44000) = 0

0 = 1−k(44000)^−3

⇒ 1 = k(44000)^−3

⇒ k = 1/(44000)^−3

⇒ 5.427 x 10^−12

Taking the natural logarithm of k, we have ln(k) = −28.68 (approx.)

Hence, the constant k is 5.427 x 10^−12 and its natural logarithm to three decimal places is -28.68

b) The probability density function is given as,

f(x) = F'(x) = 3kx^−4, for x>44000 and f(x) = 0, otherwise

The mean or expected value of the random variable is given as

E(X) = ∫[−∞,∞]xf(x)dx

= ∫[44000,∞]x(3kx^−4)dx

= 3k∫[44000,∞]x^−3dx

= 3k[(−1/2)x^−2] [∞,44000]

= (3k/2)(44000)^−2

= 270.86 (approx.)

Therefore, the mean salary given by the model is $270.86 (approx.)

To know more about the "probability density function": https://brainly.com/question/15714810

#SPJ11

Answer: 240 miles in 2 hours

Step-by-step explanation:

we know the car is traveling 60 km per half hour (30 minutes)

so to find km per hour, multiply both by 2.

the rate of speed is 120 miles per 60 minutes (1 hour)

multiply 120 mph by the 2 hours given = 240 miles in 2 hours

Answer:

240 km in 2 hours

Step-by-step explanation:

If the car travels 60 km in 30 minutes, then its speed can be calculated as follows:

Speed = distance ÷ time

Speed = 60 km ÷ (30 minutes ÷ 60) = 120 km/hour

Since the car is traveling at a constant speed, we can use the formula:

Distance = Speed × Time

To find how far the car will travel in 2 hours, we can substitute the values we have found:

Distance = Speed × Time

Distance = 120 km/hour × 2 hours

Distance = 240 km

Therefore, the car will travel 240 km in 2 hours if it continues at the same constant speed.

Measure of last angle of triangle is 117°

The triangle's characteristics include:

The angle sum property states that the sum of a triangle's three interior angles is always 180 degrees.

Angle of Triangle are

28° and 35°

Let the third angle be x

According to angle sum property

28°+35°+x=180°

x=117°

Measure of last angle of triangle is 117°

To know more about degrees, visit:

https://brainly.com/question/364572

#SPJ1

The complete question is;

Find the measure of the last angle of the triangle below.

28⁰

35°

Image is attached below.

The expression for the number of non-adult sizes is s - 19.

A value or amount is represented by an expression, which is a collection of numbers, variables, and mathematical operations like addition, subtraction, multiplication, and division. Calculations, complicated mathematical equations, and issues in a variety of disciplines, including science, engineering, economics, and statistics, may all be solved using expressions. Functions that depict a connection between variables, such as sin(x) and log(x), can also be included in expressions. Expressions are frequently employed to simulate real-world circumstances and provide predictions based on mathematical analysis.

Given that the total number od sweatshirts = s.

The number of non-adult sweatshirts can be calculated by:

Number of non-adult sizes = Total number of sweatshirts sold - Number of adult sizes

= s - 19

Hence, the expression for the number of non-adult sizes is s - 19.

Learn more about mathematical expressions here:

https://brainly.com/question/28980347

#SPJ1

Answer:

Step-by-step explanation:

2(-4) - 3(-2) = -2

 -8 + 6 = -2

   -2 = -2

Answer:

- [tex]\frac{8}{13}[/tex]

Step-by-step explanation:

let n be the other rational number , then

- [tex]\frac{26}{3}[/tex] n = [tex]\frac{16}{3}[/tex]

[a number × its reciprocal = 1 ]

multiply both sides by the reciprocal - [tex]\frac{3}{26}[/tex]

n = [tex]\frac{16}{3}[/tex] × - [tex]\frac{3}{26}[/tex]  ( cancel the 3 on numerator/ denominator )

n = - [tex]\frac{16}{26}[/tex] = - [tex]\frac{8}{13}[/tex]

To place two bench press machines in a small area, you will need a space of approximately 10 feet by 10 feet. Let's discuss it in detail below. Here are the dimensions of the bench press machine, which can help determine the amount of space required to fit two bench press machines in a small area:

The length of the bench press machine is between 48 inches and 54 inches.

The width of the bench press machine is between 28 inches and 32 inches.

The height of the bench press machine is between 48 inches and 56 inches.

Based on the above dimensions of the bench press machine, two machines can be placed in a small area of 10 feet by 10 feet. However, for safe use, the following guidelines should be followed:

There should be at least 6 feet of distance between the two bench press machines. There should be at least 3 feet of clearance in the front of the bench press machine to allow for safe movement during exercises. There should be at least 2 feet of clearance behind the bench press machine to allow for a safe exit in case of an emergency.

Thus, to place two bench press machines in a small area, you will need a space of approximately 10 feet by 10 feet.

To learn more about area refer :

https://brainly.com/question/27683633

#SPJ11

Check the picture below.

Answer:

x=-3

Step-by-step explanation:

Answer:

52.17%

Step-by-step explanation

[tex]\frac{12000}{23000}[/tex] ×100%

[tex]\frac{1200}{23}[/tex]

52.17

Answer:

The associated growth factor for a 30% increase is 1 + 0.30 = 1.30.

The associated growth factor for a 30% decrease is 1 - 0.30 = 0.70.

The associated growth factor for a 2% increase is 1 + 0.02 = 1.02.

The associated growth factor for a 2% decrease is 1 - 0.02 = 0.98.

The associated growth factor for a 0.04% increase is 1 + 0.0004 = 1.0004.

The associated growth factor for a 0.04% decrease is 1 - 0.0004 = 0.9996.

The associated growth factor for a 100% increase is 1 + 1 = 2.

Step-by-step explanation:

A growth factor is a multiplier that represents the amount by which a quantity changes as a result of a growth rate or percentage change. It is calculated by adding 1 to the decimal form of the growth rate. For example, if the growth rate is 30%, the decimal form is 0.30, and the growth factor is 1 + 0.30 = 1.30.

In case of a decrease, the growth factor is calculated by subtracting the decimal form of the decrease rate from 1. For example, if the decrease rate is 30%, the decimal form is 0.30, and the growth factor is 1 - 0.30 = 0.70.

In cases where the growth rate is a small percentage, it is important to convert it into a decimal by dividing the percentage by 100 before calculating the growth factor.

In the case of a 100% increase, the quantity doubles, so the growth factor is 2 (i.e., 1 + 1).

Answer:

[tex]735 = 3 \times 5 \times {7}^{2} [/tex]

Step-by-step explanation:

[tex]735 = 7 \times 105[/tex]

[tex]735 = 7 \times 3 \times 35[/tex]

[tex]735 = 7 \times 3 \times 5 \times 7[/tex]

[tex]735 = 3 \times 5 \times {7}^{2} [/tex]

Explanation:

Use the pythagorean trig identity to determine sine based on cos(theta) = 0.6

[tex]\sin^2(\theta)+\cos^2(\theta) = 1\\\\\sin^2(\theta)=1-\cos^2(\theta)\\\\\sin(\theta)=\pm\sqrt{1-\cos^2(\theta)}\\\\\sin(\theta)=-\sqrt{1-\cos^2(\theta)} \ \ \text{....sine is negative in quadrant Q4}\\\\\sin(\theta)=-\sqrt{1-(0.6)^2}\\\\\sin(\theta)=-\sqrt{1-0.36}\\\\\sin(\theta)=-\sqrt{0.64}\\\\\sin(\theta)=-0.8\\\\[/tex]

Since [tex]\cos(\theta)=0.6 \text{ and } \sin(\theta)=-0.8[/tex], the location of point P is (0.6, -0.8)

Recall that for any point (x,y) on the unit circle, we have:

[tex]\text{x}=\cos(\theta)\\\\\text{y}=\sin(\theta)[/tex]

meaning cosine is listed first in any (x,y) pairing.

Answer:

Here, x represents the amount (in liters) of the 25% saline solution to be added.

We can see that the 25% saline solution needs to be mixed with the 10% saline solution to obtain a mixture that is 15% saline. The ratio of the volumes of the 25% and 10% solutions can be found by subtracting the concentrations of the two solutions and dividing by the difference between the desired concentration and the concentration of the 10% solution:

x / (3.33 - x) = (15 - 10) / (25 - 10) = 5/15 = 1/3

Multiplying both sides by 3.33 - x, we get:

x = (1/3) (3.33 - x)

Multiplying both sides by 3, we get:

3x = 3.33 - x

Solving for x, we get:

x = 0.833 liters

Therefore, 0.833 liters of the 25% saline solution must be added to 3.33 liters of the 10% saline solution to obtain 4.163 liters of a 15% saline solution.

Step-by-step explanation:

Answer:

The diver descends:

50 seconds x 5 feet/second = 250 feet

The diver ascends:

54 seconds x 4.4 feet/second = 237.6 feet

Therefore, the total change in elevation is:

250 feet (descent) - 237.6 feet (ascent) = 12.4 feet

So, the diver's final elevation is:

0 feet (starting elevation) - 12.4 feet (change in elevation) = -12.4 feet

Therefore, the diver ends up 12.4 feet below sea level.

Answer:

it is 1

Step-by-step explanation:

its is 1 2 3 hsvs jafsnsjhd jsusgsmsi jshsbjdg

For the given functions, f(x)=x²+3x-7, g(x)=3x+5 and h(x)=2x²-4, f(g(x))= 9x² + 30x + 33, h(g(x))= 18x² + 60x + 46, (h-f)(x)= x² - 3x + 3, (f+g)(x)= x² + 6x - 2.

In mathematics, a function is a mathematical object that takes an input (or several inputs) and produces a unique output. It is a relationship between a set of inputs, called the domain, and a set of outputs, called the range.

Formally, a function f is defined by a set of ordered pairs (x, y) where x is an element of the domain, and y is an element of the range, and each element x in the domain is paired with a unique element y in the range. We write this as f(x) = y.

Functions can be represented in various ways, such as algebraic expressions, tables, graphs, or verbal descriptions. They can be linear or nonlinear, continuous or discontinuous, and may have various properties such as symmetry, periodicity, and asymptotic behavior.

To solve these problems, we substitute the function g(x) for x in f(x) and h(x) and simplify the resulting expressions.

f(g(x)):

f(g(x)) = f(3x+5) = (3x+5)² + 3(3x+5) - 7 (using the definition of f(x))

= 9x² + 30x + 33

h(g(x)):

h(g(x)) = h(3x+5) = 2(3x+5)² - 4 (using the definition of h(x))

= 18x² + 60x + 46

(h-f)(x):

(h-f)(x) = h(x) - f(x) = (2x² - 4) - (x² + 3x - 7) (using the definitions of h(x) and f(x))

= x² - 3x + 3

(f+g)(x):

(f+g)(x) = f(x) + g(x) = x² + 3x - 7 + 3x + 5 (using the definitions of f(x) and g(x))

= x² + 6x - 2

When multiplying out a squared term, such as (3x+5)², we can use the FOIL method, which stands for First, Outer, Inner, Last. We multiply the first terms, then the outer terms, then the inner terms, and finally the last terms, and then add up the results. For example:

(3x+5)² = (3x)(3x) + (3x)(5) + (5)(3x) + (5)(5)

= 9x² + 15x + 15x + 25

= 9x² + 30x + 25

To know more about expressions visit:

https://brainly.com/question/29246179

#SPJ1

The largest possible whole-number length for the third side is 18, which satisfies all three inequalities.

The triangle inequality theorem explains the relationship between the three sides of a triangle. This theorem states that for any triangle, the sum of the lengths of the first two sides is always larger than the length of the third side.

Let x be the length of the third side. By the triangle inequality, we have:

3 + 16 > x and 16 + x > 3 and 3 + x > 16

Simplifying, we get:

19 > x and x > 13 and x < 19

The largest possible whole-number length for the third side is 18, which satisfies all three inequalities.

To know more about Inequality visit:

brainly.com/question/30228778

#SPJ1

The required ratio of  is (a + c) : c 11:8.

Given that a:b=1:4 and b:c=3:2.

We can simplify the ratio b:c by multiplying both sides by 4 to get b:c=12:8=3:2.

To find the ratio (a+c):c, we need to express a and c in terms of b. From the first ratio, we have [tex]a=\frac14 b$[/tex]. From the second ratio, we have [tex]c=\frac{2}{3}b$[/tex]. Substituting these values into the expression (a+c):c, we get:

[tex]$$(a+c):c = \left(\frac{1}{4}b + \frac{2}{3}b\right):\frac{2}{3}b$$[/tex]

Simplifying the expression inside the parentheses, we get:

[tex]$\frac{1}{4}b + \frac{2}{3}b = \frac{3b}{12} + \frac{8b}{12} = \frac{11b}{12}$$[/tex]

Therefore, the ratio [tex]$(a+c):c$[/tex] is:

[tex]$(a+c):c = \frac{11b}{12}:\frac{2}{3}b = 11:8$$[/tex]

Hence, the required ratio is 11:8$.

To know more about ratio visit:

brainly.com/question/29467965

#SPJ1

In attempts to reduce greenhouse gas emissions and the effects of climate change, these sources must be taken into account.

A mathematical equation is a claim that two expressions are equal, typically represented with an equal sign (=) between them. The terms "left hand side" (LHS) and "right hand side" (RHS) of the equation, respectively, refer to the expressions on either side of the equal sign. Equations are a common tool for problem solving because they may be used to depict relationships between variables or quantities and to determine the value(s) of the unknown variable(s) that satisfies the equation. For instance, the link between the variables x and the integers 2, 5, and 11 is represented by the equation 2x + 5 = 11. Finding the value of x that makes the left and right sides of the equation equal is necessary to solve this equation.

given

A) Rice farming operations release methane into the atmosphere.

B) Methane is created when cows break down cellulose anaerobically.

E) Methane is released into the atmosphere when landfill material decomposes anaerobically.

Any of the aforementioned behaviours would raise the atmospheric methane concentrations and may have an impact on climate change globally.

Methane is a greenhouse gas that causes the atmosphere of the Earth to warm.

It is produced by both natural and artificial processes. Examples of human activities that contribute to methane emissions into the atmosphere include the production of rice, cattle digestion, and landfill decomposition.

In attempts to reduce greenhouse gas emissions and the effects of climate change, these sources must be taken into account.

To know more about equation visit:

https://brainly.com/question/649785

#SPJ1

The smallest number of beads we can take so that the conditions for performing inference are met is 40.

Probability:

The probability of an event is a number that indicates the probability of the event occurring. Expressed as a number between 0 and 1 or as a percent sign between 0% and 100%. The more likely an event is to occur, the greater its probability. The probability of an impossible event is 0; the probability of a certain event occurring is 1. The probability of two complementary events A and B - A occurring or B occurring - adds up to 1.

According to the Question:

Given in the question,

Teacher prepares a large container filled with colored beads. She claims that 1/8 beads are red, 1/4are blue, and the rest are yellow. Your class will test the teacher's claim by randomly drawing a simple sample of beads from the container.

Quadrant                     Frequency

      1                                    18

      2                                   22

      3                                   39

      4                                   21

The proportions are 1/8 , 1/4 and 5/8

Here, the smallest probability is 1/8 , thus it would be used to compute the frequency.

Now,

The expected frequencies are calculated as:

E = np₁ = 15 (1/8) = 1.875

E = np₂ = 16(1/8) = 2

E = np₃ = 30(1/8) = 3.75

E = np₄ = 40(1/8) = 5

E = np₅ = 80(1/8) = 10

Here, conditions are fulfilling for 40 and 90 but the smallest sample size is contained by 40. Thus, the correct option is 40.

Learn more about Number:

https://brainly.com/question/17429689

#SPJ4

A basis for the space of 2x2 lower triangular matrices is [tex]\left(\left[\begin{array}{ccc}1&0\\0&0\end{array}\right],\left[\begin{array}{ccc}0&0\\1&0\end{array}\right],\left[\begin{array}{ccc}0&0\\0&1\end{array}\right]\right)[/tex].

Lower triangular matrices resemble the following:

[tex]\left[\begin{array}{ccc}a&0\\b&c\end{array}\right][/tex]

We can write it like this:

[tex]a\left[\begin{array}{ccc}1&0\\0&0\end{array}\right]+b\left[\begin{array}{ccc}0&0\\1&0\end{array}\right]+c\left[\begin{array}{ccc}0&0\\0&1\end{array}\right][/tex]

This demonstrates the set's

[tex]\left(\left[\begin{array}{ccc}1&0\\0&0\end{array}\right],\left[\begin{array}{ccc}0&0\\1&0\end{array}\right],\left[\begin{array}{ccc}0&0\\0&1\end{array}\right]\right)[/tex]

covers the set of lower triangular matrices with dimensions 2x2. Moreover, these are linearly independent, so attempting to

[tex]a\left[\begin{array}{ccc}1&0\\0&0\end{array}\right]+b\left[\begin{array}{ccc}0&0\\1&0\end{array}\right]+c\left[\begin{array}{ccc}0&0\\0&1\end{array}\right]=\left[\begin{array}{ccc}0&0\\0&0\end{array}\right][/tex]

leads to

[tex]\left[\begin{array}{ccc}a&0\\b&c\end{array}\right] =\left[\begin{array}{ccc}0&0\\0&0\end{array}\right][/tex]

which results in a = b = c = 0 right away. As there is no other way to

[tex]a\left[\begin{array}{ccc}1&0\\0&0\end{array}\right]+b\left[\begin{array}{ccc}0&0\\1&0\end{array}\right]+c\left[\begin{array}{ccc}0&0\\0&1\end{array}\right]=\left[\begin{array}{ccc}0&0\\0&0\end{array}\right][/tex]

, these matrices are linearly independent if a = b = c = 0.

Since

[tex]\left(\left[\begin{array}{ccc}1&0\\0&0\end{array}\right],\left[\begin{array}{ccc}0&0\\1&0\end{array}\right],\left[\begin{array}{ccc}0&0\\0&1\end{array}\right]\right)[/tex]

they serve as a foundation by spanning the collection of 2x2 lower triangular matrices and being linearly independent.

To learn more about triangular matrices link is here

brainly.com/question/28325468

#SPJ4

Answer:

Equation: 2(357+30×5) = 580

x=4

Step-by-step explanation:

In one package, there is such a relationship:

357+30X5 = y

(Y is the price of a package)

The price of two parcels is 580:

then. 24=580

y= 290

x=4, so: equation: 2(35x+150) =580

Step-by-step explanation:

A shopkeeper buys a number of books for Rs. 80. If he had bought 4 more for the same amount each book would have cost Rs. 1 less. How many books did he buy?

A

8

B

16

Correct Answer

C

24

D

28

Medium

Open in App

Updated on : 2022-09-05

Solution



Verified by Toppr

Correct option is B)

Let the shopkeeper buy x number of books. 

According to the given condition cost of x books =Rs80

Therefore cost of each book =x80

Again when he had brought 4 more books

Then total books in this case =x+4

So cost of each book in this case =x+480

According to Question, 

x80−x+480=1

x(x+4)80(x+4)−80x=1

x2+20x−16x−320=0

(x−16)(x+20)=0

x=16orx=−20

Hence the shopkeeper brought 16 books

The approximate Z-score for this recruit is b. 0.18.

The mean of the head sizes (circumference) of new recruits in the armed forces can be approximated by a normal distribution with a mean 22.8 inches and standard deviation of 1.1 inches. The head size of a recruit was found to be 23 inches.

The approximate Z-score for this recruit. The formula for Z-score is given by:

[tex]Z=\frac{X-\mu}{\sigma}[/tex]

where X is the head size of the recruit, μ is the mean head size of recruits, and σ is the standard deviation of head sizes of recruits. Substituting the given values in the above formula, we get,

Z=(23-22.8)(1.1)

Z=0.2/1.1

Z [tex]\approx[/tex] 0.18

Thus, the approximate Z-score for this recruit is b. 0.18.

To know more about mean: https://brainly.com/question/20118982

#SPJ11

Answer: Xavier will receive $3.21 in change.

Step-by-step explanation:

To find the change Xavier receives, we need to subtract the cost of the dog collar from the amount he paid with his $10 bill:

Change = $10 - $6.79 = $3.21

Therefore, Xavier will receive $3.21 in change.