FAST

Write two expressions to represent the following situation. Then, find the answer.

When Nathan went to bed, the outside temperature was 28°F. When he woke up the next morning, the temperature had decreased to -13°F. By how many degrees did the temperature change during the overnight hours

Answer:

What rotation centered about the origin maps (4, − 7) to (7,4) ? 90° counterclockwise 180° counterclockwise 270° counterclockwise I don't know. ←​

Step-by-step explanation:

To map the point (4, -7) to (7, 4) by a rotation centered about the origin, we need to find the angle of rotation and direction.

We can start by finding the vector from the origin to (4, -7), which is <4, -7>. We want to rotate this vector to the vector from the origin to (7, 4), which is <7, 4>.

To do this, we need to find the angle between these two vectors. Using the dot product, we have:

<4, -7> · <7, 4> = (4)(7) + (-7)(4) = 0

Since the dot product is zero, we know that the two vectors are orthogonal, and the angle between them is 90 degrees.

To map (4, -7) to (7, 4) with a 90-degree rotation counterclockwise, we can use the matrix:

[0 -1]

[1 0]

Multiplying this matrix by the vector <4, -7>, we get:

[0 -1] [4] = [-7]

[1 0] [-7] [ 4]

which corresponds to the point (-7, 4). This matches our desired endpoint, so the answer is 90° counterclockwise.

Answer:

90° counterclockwise

Step-by-step explanation:

I am not sure if the picture helps or not.  I am trying to show that I traced the point (4,-7).  Then I have a plus sign at (0,0).  I start rotating the tracing paper counterclockwise until  I get to the point (7,4).  I needed to turn one turn of the plus sign.  That would be 90°

Helping in the name of Jesus.

Answer:

It means the point x = 5 and y = 10

Answer: The place 5 units right and 10 units up from the center of the graph (the origin).

Step-by-step explanation:

Starting at the origin, the 5 represents moving right 5, and the 10 represents going up 5.

Answer:

The table given provides the number of male and female students who voted for each party, but it does not give the total number of students in the survey. To find the probability of selecting a student who voted for the Republican party, we need to know the total number of students who participated in the survey.

The total number of students in the survey is:

50 + 75 + 125 + 50 = 300

The number of students who voted for the Republican party is:

75 + 50 = 125

Therefore, the probability of selecting a student who voted for the Republican party is:

125/300 = 0.4167 (rounded to four decimal places)

So, the answer is option D: 125/300

(please mark my answer as brainliest)

The gravitational force that the moon produces on the Earth is approximately [tex]1.98 \times 10^{20}\ \mathrm{N}$.[/tex]

What is gravitational force?

Gravitational force is the force of attraction that exists between any two objects in the universe with mass. This force is directly proportional to the masses of the objects and inversely proportional to the square of the distance between their centers.

The gravitational force that the moon produces on the Earth can be calculated using the formula:

[tex]F = G \cdot \frac{m_1 \cdot m_2}{r^2}[/tex]

where:

[tex]G$ = gravitational constant = $6.67430 \times 10^{-11}\ \mathrm{N(m/kg)^2}$[/tex]

[tex]m_1$ = mass of the moon = $7.34 \times 10^{22}\ \mathrm{kg}$[/tex]

[tex]m_2$ = mass of the Earth = $5.97 \times 10^{24}\ \mathrm{kg}$ (approximate)[/tex]

[tex]r$ = distance between the centers of the Earth and the moon = $3.88 \times 10^8\ \mathrm{m}$[/tex]

Substituting these values into the formula, we get:

[tex]F &= 6.67430 \times 10^{-11} \cdot \frac{7.34 \times 10^{22} \cdot 5.97 \times 10^{24}}{(3.88 \times 10^8)^2} \&= 1.98 \times 10^{20}\ \mathrm{N}[/tex]

Therefore, the gravitational force that the moon produces on the Earth is approximately [tex]1.98 \times 10^{20}\ \mathrm{N}$.[/tex]

To learn more about gravitational force visit:

https://brainly.com/question/29328661

#SPJ1

Answer:

The value could be any length between 3 and 15

Step-by-step explanation:

9 - 6 = 3

and

9 + 6 = 15

Answer:

To find the integral of f(x) = 2x + 5/3 over the interval [0, 5], we can use the definite integral formula:

∫[a,b] f(x) dx = F(b) - F(a)

where F(x) is the antiderivative of f(x).

First, we find the antiderivative of f(x):

F(x) = x^2 + (5/3)x + C

where C is the constant of integration.

Next, we evaluate F(5) and F(0):

F(5) = 5^2 + (5/3)(5) + C = 25 + (25/3) + C

F(0) = 0^2 + (5/3)(0) + C = 0 + 0 + C

Subtracting F(0) from F(5), we get:

∫[0,5] f(x) dx = F(5) - F(0)

= 25 + (25/3) + C - C

= 25 + (25/3)

= 100/3

Therefore, the definite integral of f(x) = 2x + 5/3 over the interval [0, 5] is 100/3.

Yes, the apparent under representation of Hispanics on the jury duty calls into question the fairness of the jury selection system, as the results of the hypothesis test suggest that the system may be systematically excluding Hispanics.

To determine whether the apparent underrepresentation of Hispanics on the jury selection system is statistically significant and calls into question its fairness, we need to perform a hypothesis test.

First, we set up the null hypothesis, which is the assumption that there is no difference between the proportion of Hispanics in the county population and the proportion of Hispanics in the jury pool. That is, the proportion of Hispanics in the jury pool is expected to be equal to 19%.

The alternative hypothesis is that there is a difference between the proportion of Hispanics in the county population and the proportion of Hispanics in the jury pool.

We can use a one-tailed z-test to test the null hypothesis, where the test statistic is calculated as:

z = (p - P) / sqrt(P(1-P)/n)

where p is the proportion of Hispanics in the jury pool, P is the proportion of Hispanics in the county population (0.19), and n is the sample size (72).

Plugging in the values, we get

z = (9/72 - 0.19) / sqrt(0.19*(1-0.19)/72) = -2.39

Assuming a significance level of 0.05, we compare the calculated z-value with the critical z-value of -1.645 (obtained from a standard normal distribution table). Since the calculated z-value is less than the critical z-value, we reject the null hypothesis and conclude that the proportion of Hispanics in the jury pool is significantly different from the proportion of Hispanics in the county population.

Learn more about hypothesis test here

brainly.com/question/30588452

#SPJ4

Conversely, as the confidence level decreases, the margin of error becomes smaller, and the confidence interval becomes narrower.

In statistics, a confidence interval is a range of values that is likely to contain the true value of a population parameter (such as a mean or a proportion), based on a sample from that population. The confidence interval is typically expressed as an interval around a sample statistic, such as a mean or a proportion, and is calculated using a specified level of confidence, typically 90%, 95%, or 99%.

Here,

To develop a confidence interval, we need to use the following formula:

Confidence Interval = sample mean ± margin of error

where the margin of error is calculated as:

Margin of Error = z* (sample standard deviation/ √n)

where z* is the critical value from the standard normal distribution table based on the chosen confidence level.

a. For a 90% confidence interval, the critical value (z*) is 1.645. Thus, the margin of error is:

Margin of Error = 1.645 * (4 / √25) = 1.317

So, the 90% confidence interval for the population mean is:

30 ± 1.317, or (28.683, 31.317)

b. For a 95% confidence interval, the critical value (z*) is 1.96. Thus, the margin of error is:

Margin of Error = 1.96 * (4 / √25) = 1.568

So, the 95% confidence interval for the population mean is:

30 ± 1.568, or (28.432, 31.568)

c. For a 99% confidence interval, the critical value (z*) is 2.576. Thus, the margin of error is:

Margin of Error = 2.576 * (4 / √25) = 2.0656

So, the 99% confidence interval for the population mean is:

30 ± 2.0656, or (27.9344, 32.0656)

d. As the confidence level increases, the margin of error also increases, because we need to be more certain that our interval includes the true population mean. This means that the confidence interval becomes wider as the confidence level increases.

To know more about confidence interval,

https://brainly.com/question/28969535

#SPJ1

the range of g is all positive numbers greater than or equal to 1. In set-builder notation, we can write the range of g as {g(x) | g(x) ≥ 1}.

How to solve and what is graph?

The range of a function refers to the set of all possible output values. Looking at the table, we can see that the output values of g(x) increase rapidly as x increases.

In fact, the output values of g(x) are the result of raising 3 to the power of x, which means that g(x) can never be negative. Therefore, the range of g is all positive numbers greater than or equal to 1. In set-builder notation, we can write the range of g as {g(x) | g(x) ≥ 1}.

A graph is a visual representation of data or mathematical functions. It is a diagram made up of points, lines, and curves that show the relationship between different variables or data points.

Graphs are used to display and analyze data, to illustrate trends and patterns, and to communicate complex information in an easily understandable way. There are many different types of graphs, including bar graphs, line graphs, pie charts, scatter plots, and more, each suited to different types of data and analysis.

To know more about Graph related questions, visit:

https://brainly.com/question/17267403

#SPJ1

Answer: 66

Step-by-step explanation:

all 3 of them should equal to 180

so 79+35 is 114

180-114 will give us the answer which is 66

The volume of the solid is given by the equation V = 36π (√2 - 1) using the triple integral.

A three-dimensional object's volume in three-dimensional space may be determined using the triple integral. The three-variable function is represented by the triple integral. If in space is a closed region, the region's entire volume may be expressed as V = Ddv, which is equivalent to V = D d x d y d z.

Cone: z = [tex]\sqrt{x^2+y^2}[/tex]

sphere: x² + y² + z² = 18

Here, we will use cylindrical coordinates to evaluate volume:

x = rcosθ , y = rsinθ, z = z

so, z = [tex]\sqrt{r^2cos^2\theta+r^2sin^2\theta} =r[/tex]

z = [tex]\sqrt{18-(x^2+y^2)} =\sqrt{18-r^2}[/tex]

r = [tex]\sqrt{18-r^2}[/tex]

r = 3

Finding limits,

[tex]Volume = \int\limits^2_0 \int\limits^3_0\int\limits^a_r {rdzdrd\theta} \, \\\\= \int\limits^2_0 \int\limits^3_0rz \ drd\theta\\\\= \int\limits^2_0 \int\limits^3_0 r(\sqrt{18-r^2}-r ) \ drd\theta\\\\[/tex]

Now, we have

[tex]\int\limits^3_0 {r\sqrt{18-r^2} } \, dr = -(9-18\sqrt{2} ) = 18\sqrt{2} -9[/tex]

Now the integral becomes,

Volume = 2π [(18√2-9) - 9]

= 2π x 18√2 - 18

V = 36π (√2 - 1)

Therefore, the volume of the solid is given by V = 36π (√2 - 1).

Learn more about Triple Integral:

https://brainly.com/question/17206296

#SPJ4

Answer:

38%

Step-by-step explanation:

I learned in class on Friday.

Multiply both numerator and denominator by 100. We do this to find an equivalent fraction having 100 as the denominator.

[tex]0.38\times \dfrac{100}{100}[/tex]

[tex]= (0.38 \times 100) \times \dfrac{1}{100} =\dfrac{38}{100}[/tex]

Write in percentage notation: 38%

Answer:

A≈1.83m²

Step-by-step explanation:

Using the formulas

A=πr2C=2πr

Solving forAA=C24π=4.824·π≈1.83346m²

Answer:

1.83 (approximate)

Step-by-step explanation:

First, we need to find the radius of the circle.

Using the formula:

[tex]C=2 \pi r[/tex]

We have to reorganize terms:

[tex]r=\frac{C}{2\pi}[/tex]

[tex]\frac{4.8}{2 \times \pi}[/tex]

r ≈ 0.76

Now we have the radius and the circumference in order to find the area.

Use the formulas:

[tex]A= \pi r^2[/tex]

[tex]C=2 \pi r[/tex]

A = C^2/4[tex]\pi[/tex]  = 4.8^2 / 4 * pi = 1.83

The correct options are:

The data contain a sample of multiple individuals.

The data are collected  are approximately at  the same point in time.

Cross-sectional data sets are a type of research design used in statistical analysis. They consist of a sample of multiple individuals or entities observed at a single point in time. One of the characteristics of cross-sectional data sets is that they do not involve any observation or measurement over time, making them different from longitudinal or time-series data sets.

One advantage of cross-sectional data sets is that they are relatively easy and inexpensive to collect. It can be assumed that the data were obtained through a random sampling of the underlying population, making them representative of the larger population. However, these data require attention to the frequency at which they are collected (weekly, monthly, yearly, etc.), as the timing of data collection can impact the results.

Overall, cross-sectional data sets can provide a snapshot of a population or phenomenon at a specific point in time, making them useful for a wide range of research questions in social, economic, and political sciences.

Find out more about Cross-sectional data

at brainly.com/question/14364178

#SPJ4

There are 81 potential outcomes in Andy's sample space.

Potential Outcomes is a list of every scenario that could happen as a result of an occurrence. For instance, while rolling a dice, the possible results are 1, 2, 3, 4, 5, and 6. 6. Favorable Result - the intended outcome. For instance, if you roll a 4 on a dice, the only possible result is 4.

The total number of cards (i.e., 4 + 3 + 2 = 9) determines the number of outcomes that can occur in each draw.

We must multiply the total number of results for each draw in order to determine the total number of possible outcomes for the two draws.

For two draws with replacement, there are exactly as many outcomes available as the product of the amount of outcomes that could occur in each draw.

9 × 9 = 81.

To know more about potential outcomes visit:-

https://brainly.com/question/28889662

#SPJ1

The standard form of the equation of the ellipse is (x - 2)^2 / 4 + (y - 3)^2 / 7 = 1

To find the standard form of the equation of the ellipse, we first need to determine some of its properties.

The foci of the ellipse are given as (2, 0) and (2, 6). This tells us that the center of the ellipse is at the point (2, 3), which is the midpoint of the line segment connecting the foci.

The major axis of the ellipse is given as a length of 8. Since the major axis is the longest dimension of the ellipse, we can assume that the length of the major axis is 2a = 8, so a = 4.

Next, we need to determine the length of the minor axis. We know that the distance between the foci is 2c = 6, so c = 3. Since c is the distance from the center of the ellipse to each focus, we can use the Pythagorean theorem to find the length of the minor axis

b^2 = a^2 - c^2

b^2 = 4^2 - 3^2

b^2 = 7

b = sqrt(7)

Now we have all the information we need to write the standard form of the equation of the ellipse. The standard form is

(x - h)^2 / a^2 + (y - k)^2 / b^2 = 1

where (h, k) is the center of the ellipse. Plugging in the values we found, we get

(x - 2)^2 / 4 + (y - 3)^2 / 7 = 1

Learn more about ellipse here

brainly.com/question/29027368

#SPJ4

Answer:

Step-by-step explanation:

[tex]h(3)=3\times 3^2+3a-1 \rightarrow h(3)=26+3a[/tex]

But we cannot find [tex]a[/tex] unless we are told what [tex]h(3)[/tex] equals.

Answer:

g(x)

=6x−4

=3x

2

−2x−10

Escribe (g∘f)(x) como una expresión en términos de x.

Step-by-step explanation:

Primero necesitamos conocer la función f(x). Luego podemos sustituir f(x) en g(x) para obtener (g∘f)(x).

Como la función f(x) no se proporcionó en la pregunta, asumiré que f(x) es:

f(x) = x^2 - 2x + 1

Entonces, podemos sustituir f(x) en g(x) de la siguiente manera:

g(f(x)) = 6f(x) - 4

= 6(x^2 - 2x + 1) - 4 (sustituyendo f(x))

= 6x^2 - 12x + 2

Por lo tanto, (g∘f)(x) = 6x^2 - 12x + 2.

Answer:

10 metres

Step-by-step explanation:

All sides are equal in Rhombus

So, the length of one side= 40m÷4

=10 metres

The midline equation of the function is y = 1.5.

The gap between a trigonometric function's highest and least values is known as its amplitude. The difference between the greatest and minimum numbers is, in other words, divided by two. For instance, the amplitude is A in the equation y = A sin(Bx) + C. The amplitude, also known as the average value of the function across a period, denotes the "height" of the function above and below the midline. It gauges the magnitude or intensity of the oscillation of the function's representation of. The oscillation is more prominent and subtler depending on the amplitude, which ranges from higher to lower values.

Given that, the function has minimum point at (1, 1.5) and an amplitude of 1.5.

Using the definition of the amplitude the midline is the given amplitude.

Hence, the midline equation of the function is y = 1.5.

Learn more about amplitude here:

https://brainly.com/question/9124856

#SPJ1

Answer:

3

Step-by-step explanation:

Khan Academy

Answer:

15.8823% error

Step-by-step explanation:

Percent Error Formula

abs([tex]\frac{(a-x)}{x}[/tex]) * 100%

abs:  absolute value

a:  actual value

x:  expected value

Percent Error = abs([tex]\frac{14.3 - 17}{17}[/tex]) * 100%

                       = abs(-0.158823) * 100%

                       15.8823% error

The horizontal line at $7.25 on the y-axis of the graph is the one with a slope that most accurately depicts the federal minimum wage of $7.25 per hour as of January 1, 2014.

Although it varies from state to state, the federally mandated minimum wage in the United States is $7.25 per hour. The District of Columbia had the highest minimum wage in the US as of January 1, 2023, at 16.50 dollars per hour.

The variable dearness allowance (VDA) component, which takes into account inflationary trends, such as an increase or fall in the Consumer Price Index (CPI), and, if applicable, the housing rent, are included in the computation of the monthly minimum salary.

To know more about graph visit:-

https://brainly.com/question/17267403

#SPJ1

The function for the value of the account after t years can be written as:

V(t) = 93000(1.08900365)t

The coefficient of 1.08900365 is the annual growth rate (APR) compounded daily. After rounding to four decimal places, it becomes 1.0890.

The percentage of growth per year (APY) is 8.90%. This is the same as APR, but expressed as a percentage.

The composite function is obtained applying the inner function as the input to the outer function.

The functions for this problem are defined as follows:

Hence the composite function is obtained replacing the two instances of T on the function N(t) by the definition of T(t), hence:

N(T(t)) = 20(6t + 1.2)² - 128(6t + 1.2) + 77

N(T(t)) =  720t² + 288t + 28.8 - 768t - 204.6.

N(T(t)) = 720t² - 480t - 175.8.

For a population of 18413 bacteria, we have that N(T(t)) = 18413, hence:

720t² - 480t - 175.8 = 18413

720t² - 480t - 18588.8 = 0.

The coefficients of the quadratic function are given as follows:

a = 720, b = 480, c = -18.588.8.

Using a quadratic function calculator, the positive solution is given as follows:

t = 4.76 hours.

More can be learned about composite functions at https://brainly.com/question/10687170

#SPJ1

Answer:

Step-by-step explanation:

The three inequalities that x and y must satisfy because of the package's requirements for protein, fat, and carbohydrate are:

Protein: 1x + 1y ≥ 8 (at least 8 units of protein)

Carbohydrates: 2x + 1y ≥ 11 (at least 11 units of carbohydrates)

Fat: 1x + 1y ≤ 10 (no more than 10 units of fat)

The inequalities that x and y must satisfy because they cannot be negative are:

x ≥ 0

y ≥ 0

Step-by-step explanation:

To satisfy the requirements for protein, fat, and carbohydrates, the following three inequalities must be satisfied:

1. 1x + 1y ≥ 8 (At least 8 units of protein)

2. 2x + 1y ≥ 11 (At least 11 units of carbohydrates)

3. 1x + 1y ≤ 10 (No more than 10 units of fat)

To ensure that x and y are non-negative, the following inequalities must be satisfied:

x ≥ 0y ≥ 0

Therefore, the complete set of inequalities for x and y are:

x + y ≥ 82x + y ≥ 11x + y ≤ 10x ≥ 0y ≥ 0

The slope of the function is 12. Because of the slope, Jennifer will require 12 extra meters of tape for each additional office she needs to tape the baseboards in.

A line's slope on a graph is its steepness or inclination. It may be derived from any two locations on a line by dividing the vertical change (rise) by the horizontal change (run). Positive, negative, zero, or undefinable slopes are all possible for lines. A line on a graph with a positive slope is growing as you travel from left to right, while one with a negative slope is declining. A line has a slope of zero when it is horizontal and a slope of infinity when it is vertical.

The given function is y = 12x + 25.

The standard equation of the line is given as:

y = mx + b

where, m is the slope.

Comparing the equation with the given equation the slope of the function is 12.

Because of the slope, Jennifer will require 12 extra metres of tape for each additional office she needs to tape the baseboards in. In other words, if more offices need to be painted, the amount of sellotape required also grows linearly.

Learn more about slope here:

https://brainly.com/question/1905613

#SPJ1

Answer:

The maximum number of students to whom 48 apples, 60 bananas, and 96 guavas can be distributed equally is 20. Each student will receive 2 apples, 3 bananas, and 4 guavas.

Because g(x) is continuous on the interval, we can see that the correct option is the last one (counting from the top)

Here we have the function g(x), and we know that it is continuous on the interval [1, 6], and that:

g(1) = 18

g(6) = 11

If it is continuous, then g(x) covers all the values between 18 and 11 in the given interval, this means that there must exist a value c in the given interval such that when we evaluat g(x) in that value c, we get the outcome 12, and we know this by the intermediate value theorem.

So the correct optionis the last one.

Learn more about continuous functions at

https://brainly.com/question/18102431

#SPJ1

Answer:

................................

The values of e and f in the given equation are: e = 2√3 ± √(4√3), e = 2√3 ± 2√2, and f = 4√3.

Equations containing radicals can be made simpler by solving the resultant equation after squaring both sides of the equation to remove the radical. Nonetheless, caution must be exercised to guarantee that any solutions found are reliable and adhere to any variables' limitations.

The given equation is [tex](e - 2\sqrt{3} )^2[/tex] = f - 20√3.

Expanding the left side of the equation we have:

[tex](e - 2\sqrt{3} )^2[/tex] = (e - 2√3)(e - 2√3)

= [tex]e^2[/tex] - 2e√3 - 2e√3 + 12

= [tex]e^2[/tex] - 4e√3 + 12

Substituting back in the function

[tex]e^2[/tex] - 4e√3 + 12 = f - 20√3

[tex]e^2[/tex] - 4e√3 - f + 20√3 - 12 = 0

Using the quadratic formula:

e = [4√3 ± √(16*3 + 4(f - 20√3 + 12))] / 2

e = [4√3 ± √(4f - 64√3)] / 2

e = 2√3 ± √(f - 16√3)

Now for,

(e - 2√3)² = f - 20√3

(2√3 + √(f - 16√3) - 2√3)² = f - 20√3

f - 20√3 = f - 16√3

f = 4√3

Hence, the values of e and f in the given equation are: e = 2√3 ± √(4√3), e = 2√3 ± 2√2, and f = 4√3.

Learn more about radicals here:

brainly.com/question/1369233

#SPJ1