Could someone help me with this too? Much appreciated! I am a bit stuck.

Answer:

75

Explanation:

is the answer for your question

Answer:

[tex]m_{isoborneol }=0.39g\\\\m_{Camphor}=0.38g\\[/tex]

Explanation:

Hello there!

In this case, according to the given information, it turns out possible for us to infer that the reaction whereby isoborneol goes to camphor occurs in a 1:1 mole ratio, that is why the theoretical yield of the latter is also 2.5 mmol (0.0025 mol) but the masses can be calculated as follows:

[tex]m_{isoborneol }=0.0025mol*\frac{154.25g}{1mol} =0.39g\\\\m_{Camphor}=0.0025mol*\frac{152.23 g}{1mol} =0.38g\\[/tex]

Because of the fact this is a rearrangement reaction whereas the number of atoms is not significantly modified.

Regards!

In the original solution you have the mixture of a weak acid (Hypochlorous acid) and its conjugate base (Sodium hypochlorite). That is a buffer.

The barium hydroxide will react with hypochlorous acid. If this reaction cause the complete reaction of hypochlorous acid, the buffer break its capacity and the pH change in several units. In this case:

The addition of barium hydroxide will raise the pH slightly because the buffer still working.

The initial moles of those species are:

Hypochlorous acid:

[tex]1L * \frac{0.370mol}{1L} = 0.370 moles[/tex]

Sodium hypochlorite:

[tex]1L * \frac{0.493mol}{1L} = 0.493 moles[/tex]

Now, a strong acid as barium hydroxide (Ba(OH)₂) reacts with a weak acid as hypochlorous acid (HClO) as follows:

Ba(OH)₂ + 2HClO → Ba(ClO)₂ + 2H₂O

For a complete reaction of 0.092 moles of barium hydroxide are required:

[tex]0.092 moles Ba(OH)_2*\frac{2mol HClO}{1molBa(OH)_2} = 0.184 moles HClO[/tex]

As there are 0.370 moles, the moles of HClO after the reaction are:

0.370 moles - 0.184 moles = 0.186 moles of HClO will remain

As you still have hypochlorite and hypochlorous acid you still have a buffer.

Thus, the pH will raise slightly because the amount of acid is decreasing and slightly because the buffer can keep the pH.

Learn more about buffers in:

https://brainly.com/question/24302294

Explanation:

Amount of water required in each case:

(a)The mass% of the solution is:9.95

Mass of solute that is urea is 6.80 g

To determine the mass of solvent water use the formula:

[tex]mass percent=\frac{mass of solute}{mass of solution} x 100\\\\9.95=(6.80g/mass of solution )x100\\mass of solution =(6.80 /9.95)x100\\=68.3 g[/tex]

Hence the mass of solvent = mass of solution - the mass of solute

=68.3 g - 6.80g

=61.5 g

Hence, the answer is mass of solvent water required is 61.5 g.

(b) Given mass%=1.70

mass of solute MgBr2 = 29.3 g

The mass of solvent water required can be calculated as shown below:

[tex]mass percent=\frac{mass of solute}{mass of solution} x 100\\\\1.70=(29.3g/mass of solution )x100\\mass of solution =(29.3 g /1.70)x100\\=1720 g[/tex]

The mass of the solution is 1720 g.

Mass of solvent water = mass of solution - mass of solute

=1720 g - 29.3 g

=1690.7 g

Answer: The mass of water required is 1690.7 g.

Answer:

On moving from left to right in a period the electropositive character decreases as the tendency to lose electrons decreases.

Explanation:

Answer:

Both have solutions in the  graduated cylinder.

Explanation:

Recording the amount of alcohol used as the difference between two masses is the wrong method used for measuring tert-butyl alcohol for the experiment.  For measuring tert-butyl alcohol for this experiment, the student has to measure the two masses when both the graduated cylinders has solution of tert-butyl alcohol not when one of it is empty (having no tert-butyl alcohol ).

The wrong aspect is that the liquid didn't need to be weighed. Instead the volume should have been recorded with the aid of the graduated cylinder.

This is a cylinder with marked readings and is used to measure the volume of liquids in the laboratory.

The graduated cylinder will accurately measure the amount of  alcohol used due to it being volatile and the mass fluctuating during the measurement.

Read  more about Graduated cylinder here https://brainly.com/question/24869562

Answer:

13.5%

Explanation:

To answer this you need to understand that percentage error can never be negative as we use absolute value in the equation

To get molar/atomic mass = mass/moles

=0.3681g/(6.514×10^-3)moles

=56.509g/moles

percentage error = (65.38-56.509)/65.38 ×100

=13.56% (this is what I'm getting without rounding off your question wasn't specific on how many d.p to use)

Answer:

[tex]{ \sf{Ca _{3} P_{2} }}[/tex]

Explanation:

one thing to know is that higher surface area = higher boiling point.

NaCl has the smallest surface area, so it's the first one.

H2O has less surface area than methane, so it's second.

Methane has more surface area than H20, so it's third.

The big molecule has the most surface area, so it's last

Temperature measures the average kinetic energy of particles of the substances. Melting point is directly proportional to surface area. Therefore, the correct option is option C.

Temperature is used to measure degree or intensity of heat of a particular substance. Temperature is measured by an instrument called thermometer.

Temperature can be measured in degree Celsius °c, Kelvin k or in Fahrenheit. Temperature is a physical quantity. Heat always flow from higher temperature source to lower temperature source.

We can convert these units of temperature into one another. The relationship between degree Celsius and Fahrenheit can be expressed as:

°C={5(°F-32)}÷9

Melting point is directly proportional to surface area. NaCl has the smallest surface area. Water has less surface area than methane. Methane has more surface area than H[tex]_2[/tex]O.

Therefore, the correct option is option C.

To know more about temperature, here:

https://brainly.com/question/13694966

#SPJ2

Explanation:

here's the answer. I just plug the expression into my calculator and find the intercept to avoid the quadratic formula

Solution : An oxidation reduction (redox) reaction is a type of chemical reaction that involves a transfer of electrons between tow species an oxidaion reductin reaction is any chemical reaction in which the oxidation number of a molecule atom or ion changes by gaining or losing an electron

Answer:

deuterium is heavier isotope of hydrogen need

high weight of atom will lead to higher boiling point

Answer:

2) 3 carbons

Explanation:

The alkane with one carbon is methane but it has no isomer.

The alkanes starting with propane only have isomers

Explanation:

An alkane can show structural isomerism if it has at least __4__ carbon atom

Answer:

C . Kinetic Molecular Theory

Answer:

the relationship between independent and dependent variable

Explanation:

A straight line or linear graph is one of the ways to represent a given data. It shows the relationship between two given set of data; one called the independent variable is plotted on the x-axis (horizontal) while the other called the dependent variable is plotted on the y-axis (vertical).

The straighter the line is, the stronger the relationship between the two variables and vice versa. Hence, the straight line in the graph represents the relationship between independent and dependent variable.

Answer:

group 1 elements(hydrogen,sodium,etc)

Explanation:

bexause if noticed all the element in the same group have the same eletron in thr outer most shell for example the group 1 elements are said to have 1 outermost elect ron which make them react so the same

Answer:

362g

Explanation:

heat lost by metal= heat gained by acetic acid

tfs are the same so you cando delta T

convert Cal/gc to J/gc

thectgod ig follow

Answer:

We need chemistry in nursing because it deals with various kinds of drugs and the reactions of these drugs on the human body as well as with each other.

Explanation:

since hydrochloric acid is an acid and calcium hydroxide is a base, we know that this is an acid base reaction. The ions will then dissociatiate and bond with one another.

Answer:

There must be a complete circuit to allow electrons to flow. Oxidation happens at the anode. Reduction happens at the cathode.

Explanation:

Select all that are true for both a voltaic cell and an electrolytic cell.

There must be a complete circuit to allow electrons to flow. YES. This is true for both cells.

The redox reaction is spontaneous. NO. This is only true for the voltaic cell.

Oxidation happens at the anode. YES. This is true for both cells.

Reduction happens at the cathode. YES. This is true for both cells.

The redox reaction is non-spontaneous. NO. This is only true for the electrolytic cell.

The statements that have been true for both voltaic and electrolytic cells are:

Option A: There must be a complete circuit to allow electrons to flow.

Option C: Oxidation happens at the anode.

Option D: Reduction happens at the cathode.

The electrolytic cells are the one that converts electrical energy into chemical energy. Voltaic cells convert chemical energy into electrical energy.

From the given options, the best-suited option for both electrolytic and voltaic cells are:

The statements that have been true for both voltaic and electrolytic cells are, Option A, C, and D.

For more information about the electrolytic and voltaic cell, refer to the link:

https://brainly.com/question/1370699

Answer:

XCH₄ = 0.461

XCO₂ = 0.539

Explanation:

Step 1: Given data

Step 2: Calculate the total pressure in the container

We will sum both partial pressures.

P = pCH₄ + pCO₂

P = 431 mmHg + 504 mmHg = 935 mmHg

Step 3: Calculate the mole fraction of each gas

We will use the following expression.

Xi = pi / P

XCH₄ = pCH₄/P = 431 mmHg/935 mmHg = 0.461

XCO₂ = pCO₂/P = 504 mmHg/935 mmHg = 0.539

Answer:

74%

Explanation:

Step 1: Write the balanced equation

2 C₆H₁₀(l) + 17 O₂(g) ⇒ 12 CO₂(g) + 10 H₂O(g)

Step 2: Determine the limiting reactant

The theoretical mass ratio (TMR) of C₆H₁₀ to O₂ is 164:544 = 0.301:1.

The experimental mass ratio (EMR) of C₆H₁₀ to O₂ is 115:199 = 0.578:1.

Since EMR > TMR, the limiting reactant is O₂.

Step 3: Calculate the theoretical yield of H₂O

The theoretical mass ratio of O₂ to H₂O 544:180.

199 g O₂ × 180 g H₂O/544 g O₂ = 65.8 g H₂O

Step 4: Calculate the percent yield of H₂O

%yield = (experimental yield/theoretical yield) × 100%

%yield = (49 g/65.8 g) × 100% = 74%

Answer:

Percentage yield of H₂O = 74.24%

Explanation:

The balanced equation for the reaction is given below:

2C₆H₁₀ + 17O₂ —> 12CO₂ + 10H₂O

Next, we shall determine the masses of C₆H₁₀ and O₂ that reacted and the mass of H₂O produced from the balanced equation. This is can be obtained as follow:

Molar mass of C₆H₁₀ = 82 g/mol

Mass of C₆H₁₀ from the balanced equation = 2 × 82 = 164 g

Molar mass of O₂ = 32 g/mol

Mass of O₂ from the balanced equation = 17 × 32 = 544 g

Molar mass of H₂O = 18 g/mol

Mass of H₂O from the balanced equation = 10 × 18 = 180 g

SUMMARY:

From the balanced equation above,

164 g of C₆H₁₀ reacted with 544 g of O₂ to produce 180 g of H₂O.

Next, we shall determine the limiting reactant. This can be obtained as follow:

From the balanced equation above,

164 g of C₆H₁₀ reacted with 544 g of O₂.

Therefore, 115 g of C₆H₁₀ will react to produce = (115 × 544)/164 = 381 g of O₂.

From the calculations made above, we can see that a higher mass (i.e 381 g) of O₂ than what was given (i.e 199 g) is needed to react with 115 g of C₆H₁₀.

Therefore, O₂ is the limiting reactant and C₆H₁₀ is the excess reactant.

Next, we shall determine the theoretical yield of H₂O. This can be obtained by using the limiting reactant as shown below:

From the balanced equation above,

544 g of O₂ reacted to produce 180 g of H₂O.

Therefore, 199 g of O₂ will react to produce = (199 × 180)/544 = 66 g of H₂O.

Thus, the theoretical yield of H₂O is 66 g.

Finally, we shall determine the percentage yield. This can be obtained as follow:

Actual yield of H₂O = 49 g

Theoretical yield of H₂O = 66 g

Percentage yield of H₂O =?

Percentage yield = Actual yield /Theoretical yield × 100

Percentage yield of H₂O = 49/66 × 100

Percentage yield of H₂O = 74.24%

water is known as the mixture

Answer:

iv. Iron

water is not a mixture

hydrogen is the simplest element

air is pure

Explanation:

Since Kc is

[tex]k = \frac{(products)}{(reactants)} [/tex]

You can insert the Hydrogen and Iodine gas on top, and Hydrogen Iodide in the denominator.

Note: you can only include gases and aqueous species in an equilibrium expression, and all the species in this reaction are gaseous so you're good.

Inserting their molarity at equilibrium into their places, and you can solve. Don't forget to make the coefficient of HI turn into a power.

Answer:

See explanation and Image attached

Explanation:

The preparation of triphenylmethanol occurs as shown in the image attached to this answer.

The first step is the nucleophillic reaction of the phenyl magnesium bromide with the carbonyl group.

Reaction of the second molecule of phenyl magnesium bromide with the product yields triphenyl methoxide ion. Reaction with acid yields the triphenylmethanol product which is extracted into the organic phase.

The triphenylmethanol product can be purified by recrystallization.

Answer:

True

Explanation:

The value of the mole is equal to the number of atoms in exactly 12 grams of pure carbon-12. 12.00 g C-12 = 1 mol C-12 atoms = 6.022 × 1023 atoms • The number of particles in 1 mole is called Avogadro's Number (6.0221421 x 1023).

Answer:

CaCl2(aq) + Na2CO3(aq) → CaCO3(s) + 2NaCl(aq)

Reference:

H.W. Hanna and A. Dittmar; Laboratory Manual for General Chemistry, 4th ed.; Morton Publishing Company, Denver, Colorado