Consider a circuit where the input voltage source is connected in series with a capacitor, inductor and resistor. Which of the following statements are true: a. Voltage across the inductor must be continuous c. Voltage across the resistor in this circuit must be continuous c. Current through the capacitor must be continuous d. None of the above

Option B is Correct

The velocity of the center of mass remains constant before the collision, when they collide there is a slight decrease in kinetic energy of the system since the collision is inelastic, resulting in a slight decrease of velocity, afterwards the velocity is constant again.

Velocity is the directional velocity of a moving object, observed from a given frame of reference and indicating the rate of change of position measured at a given time reference (eg 60 km/h northward). Velocity is a fundamental concept in kinematics, a branch of classical mechanics that describes the motion of bodies.

Velocity is a physical vector quantity. Both magnitude and direction are required to define it. The scalar absolute value (magnitude) of velocity is called velocity, and its magnitude is a consistent derived unit measured in the SI (metric) system as meters per second (m/s or m⋅s−1). For example, " meters/second" is a scalar, but "5 meters/second east" is a vector. An object is said to be accelerating if its velocity, direction, or both change.

Learn more about velocity here : https://brainly.com/question/24445340

#SPJ4

The maximum acceleration for the belt that the slipping of the crate does not appear is 2 m/s².

what is a belt?

To learn more about belt refer to

https://brainly.com/question/11477019

#SPJ1

When a function p(x) determines location, the velocity and acceleration are its first and second derivatives, respectively.

The equation a = v/t denotes acceleration (a), which is the change in velocity (v) over the change in time (t). This enables you to calculate the change in velocity in meters per second squared (m/s2). Since acceleration is a vector quantity, both its magnitude and its direction are included. The speed and direction of an object's motion are its velocity. Alternatively put, velocity is the pace at which an object's position changes (where position incorporates direction by specifying whether the object is moving backwards or forwards on a line, or moving sideways or up and down in two or three dimensions).

to know more about acceleration please visit.

https://brainly.com/question/12550364

#SPJ4

(A) With 268.94 N tension must she stretch it.

26% increase in tension is needed to increase the frequency from 65.4 Hz to 73.4 Hz, corresponding to a rise in pitch from C to D.

Part (A)

Fundamental frequency =f0= 65.4 Hz.

The length of the vibrating portion of the string = l = 0.615 m

Mass= m = 14.8 g

We know, [tex]f_0 = \frac{v}{2l}[/tex]

So, the value of v will be 65.4*2*0.615 = 80.442 m/s

As, We know,

[tex]T=\frac{v^2}{\frac{m}{l}}[/tex]

So, the value of tension will be: [tex]\frac{80.442^2}{\frac{14.8}{0.615}}=\frac{6470.91}{24.06}=268.94\:N[/tex]

Part (B)

Fundamental frequency =f0= 73.4 Hz.

The length of the vibrating portion of the string = l = 0.615 m

Mass= m = 14.8 g

We know, [tex]f_0 = \frac{v}{2l}[/tex]

So, the value of v will be 73.4*2*0.615 = 90.282 m/s

As, We know,

[tex]T=\frac{v^2}{\frac{m}{l}}[/tex]

So, the value of tension will be: [tex]\frac{90.282^2}{\frac{14.8}{0.615}}=\frac{8150.8395}{24.06}=338.77\:N[/tex]

So, the percentage increase in tension will be [tex]\frac{338.77-268.94}{268.94}\times 100\%=25.96\% \approx 26\%[/tex]

For more questions on Fundamental frequency https://brainly.com/question/1967686

#SPJ4

The complete question should be:

a cellist tunes the c-string of her instrument to a fundamental frequency of 65.4 hz. the vibrating portion of the string is 0.615 m long and has a mass of 14.8 g .

Part A: With what tension must she stretch it?

Part B

What percent increase in tension is needed to increase the frequency from 65.4 Hz to 73.4 Hz, corresponding to a rise in pitch from C to D?

It is easy to measure the period using the photogate timer.

Photogate timer is used to study free fall, rolling objects, collisions, and pendulums. Photogates allow for extremely accurate timing of events within physics experiments, for studying free fall, air track collisions, pendulum periods, the speed of a rolling object, among other things.

To measure the period of a simple pendulum, we set the simple pendulum into oscillation. Let's say 10 oscillations. The time to complete this oscillation is recorded. This time is divided by the no of oscillation to get the period. Period is also measured in second.

This means that period of a simple pendulum is given as T = t/n

where T is the period and t is the time to complete a given oscillation.

learn more about photogate timer from

https://brainly.com/question/2456688

#SPJ1

The principle of connectedness would most likely lead you to perceive all the (c) rugs in a ladder as part of a single unit.

The law of unified connectedness states that elements that are connected to each other using colours, lines, frames, or other shapes are perceived as a single unit when compared with other elements that are not linked in the same manner.

In quantum mechanics, there's a phenomenon called entanglement. Entanglement really does connect things in different places for a very specific definition of “connect”. And there’s a real (but complicated) sense in which these connections end up connecting everything.

To know more about Principle of Connectedness:

https://brainly.com/question/14414320

#SPJ4

The intensity pattern visible on a screen behind the slits can be stated to depend on the screen's distance (d=1.168m).

From the question we are told,

Two slits that are 0.20 mm apart are illuminated by 650 nm light. The intensity pattern shown on a screen behind the slits is depicted in (Figure 1).

Typically, the mathematical formula for the distance is as follows:

[tex]d = \sqrt{(x_2 - x_1)^2 + (y_2-y_1)^2}[/tex]

d=0.33x10^-2x0.23x10^-3/650x10^-9

d=1.168m

The distance formula is a formula used to determine how far apart two places are from one another. The dimensions of these points are unlimited. For instance, you could need to determine the separation between two points in space, a plane, or a line (1, 2, or 3 dimensions) (3d).

Distance is the overall, directionless movement of an object. Distance can be characterized as the amount of space an object has covered, regardless of the starting or ending location.

Learn more about distance here:

https://brainly.com/question/26711747

#SPJ4

The distance that the bullet penetrates is 0.03m.

Given data:

The mass of the bullet is

m = 25 g = 0.025 kg

The bullet's initial velocity is

u = 350 m/s

The final velocity of the bullet is

v = 0

The average force opposing the motion is

F = 50000N

From Newton's second law, the acceleration derived as,

F = m. a.

a = F. m..........(1)

Substituting values in equation (1), we get:

a = 50000 N / 0.025 kg = 2×106 m/s 2

The equation of motion is,

v 2=u 2−2 a S

2 a S=u 2−v 2

S = u 2−v 2/2 a.......(2)

Substituting values in equation (2), we get:

S = (350 m/s)2−0/2(2×106 m/s 2)

 =12.25×104 m/s 4×106 m/s 2=0.03m

here, the distance that bullet penetrates is 0.03m.

Kinetic energy has the following formula: K.E. = 1/2 m v 2, where m is the object's mass and v is its square velocity. The kinetic energy is measured in kg/m per second squared if the mass is measured in kg and the velocity is measured in meters per second.

Radiant, thermal, electrical, and mechanical kinetic energies are the basic categories.

Learn more about kinetic energy here:

https://brainly.com/question/17858145

#SPJ1

Combination of swimming and biking times that meets distance and the time constraints in this situation is s + b ≤ 2. An inequality that represents  number of gift items that Elena needs is : 3b+5n≤30.

If athletes train for not more than 2 hours a day, then the sum of the hours training swimming 'a' and biking 'b' should be less than or equal to 2. Hence, we can write the following inequality:

s + b ≤ 2

Inequality that represents Mai's statement is:

s + b ≤ 2

Part 2:

It is given that , bracelets cost $3, necklaces cost $5 and she can spend not more than $30

Then the inequality that represents the number of gift items that Elena needs :  3b+5n≤30

To know more about inequality equation, refer

https://brainly.com/question/11234618

#SPJ1

Answer: m = 72 kg

Explanation:

A basketball experiences four forces as it soars through the air. The ball is being pulled down to the Earth by gravity, being propelled upward by buoyancy, and slowed down due to the drag force created by the air it collides with.

A force is an influence that has the power to alter an object's motion. An object with mass can change its velocity, or accelerate, as a result of a force. An obvious way to describe force is as a push or a pull. A force is a vector quantity since it has both magnitude and direction.

For instance, a basketball will strike the ground hard when it is dribbled. The ground's force on the ball is balanced by this force of the ball on the ground. The ball is sent upwards by the second force since it acts in the opposite direction. There are numerous characteristics of motion that depend on this interaction.

Thus, A basketball experiences four forces as it soars through the air.

To learn more about force, follow the link;

https://brainly.com/question/13191643

#SPJ1

Particles can exist in classically forbidden regions outside the finite square-well potential.

The correct option is D.

In the absence of quantum effects, everything would be continuous, smooth, and completely predictable in the Newtonian sense. However, we may not be here to get bored with this if Planck's constant were 0.

At the atomic scale, the behavior of both particles and waves is described by Planck's constant. One of the factors that led to the creation of quantum mechanics is Planck's constant. It was a surprise when those boundaries also turned to represent the limits where known rules of physics applied since the Planck scaled was developed as an universal set of units.

To know more about Planck constant visit:

https://brainly.com/question/2289138

#SPJ4

Initial current via the inductor is lo = 0, and initial charge at the capacitor is Q-o = 3.2 C. The only two devices allowed by the loop rule.

Find the current (sign included) flowing through the inductor at the point t = 2.2 seconds using the loop rule and the differential equation derived for an LC circuit. Derive the differential equation for an LC circuit using the loop rule. To improve comprehension of complex concepts in electrical circuit analysis, such as inductance, capacitance, and reactance, By building up electric charges on two nearby surfaces, a capacitor is a device that stores electrical energy in an electric field. An RL circuit is one with resistance and self-inductance, and an RL circuit with a resistor.

to know more about capacitor please visit.

https://brainly.com/question/29301875

#SPJ4

If A + B = 0, then the magnitude of B is equal to the magnitude of A. This is because the magnitude of a vector is simply its size or length, and if two vectors add up to zero, then their magnitudes must be equal.

As for the direction of B, it is the opposite of the direction of A. This is because if two vectors are equal in magnitude and opposite in direction, their sum will be zero. For example, if A is a vector pointing to the right and B is a vector pointing to the left, their sum will be zero. Similarly, if A is a vector pointing upwards and B is a vector pointing downwards, their sum will also be zero.

In summary, if A + B = 0, then the magnitude of B is equal to the magnitude of A, and the direction of B is opposite to the direction of A.

Learn more from here:

https://brainly.com/question/18660017

When the gymnast starts to jump his potential energy starts to convert to kinetic energy. But when he reaches the maximum height and stop there for seconds, potential energy regains. Thus, option C is correct.

Potential energy of an object is the energy stored in it by virtue of its position. Potential energy increases with increases in mass and height which is clear from the equation for potential energy

p = mgh

Kinetic energy is generated by motion of the object. Thus, only a moving body attains a kinetic energy. Kinetic energy depends on the mass and velocity of the object.

Here, the gymnast gains a kinetic energy when he starts to jump from rest. But, when he reaches the maximum height where the speed slows down, his kinetic energy converts to potential energy. Thus, option C is correct.

To find more on kinetic energy, refer here:

https://brainly.com/question/26472013

#SPJ1

#SPJ1

Your question is incomplete. But your complete question probably was:

A gymnast uses a flexible stick to jump over the bar. Which of the following

describes energy changes when he reaches the highest point of his jump?

A) kinetic- potential- potential

B) kinetic- potential- kinetic

C) potential - kinetic – potential

D) potential- potential- kinetic

According to the given statement 414 nm is the value of the unknown wavelength.

The distance between two wave crests, which also applies to troughs, is known as the wavelength. Cycles per second (Hz), the number of vibrations that pass across a certain region in a second, is used to measure frequency (Hertz). The link between wavelength and frequency is discussed in this article.

For third order maxima,

asinθ  = mλ

asinθ = 3 * 690

The slit width in this instance is a, and the angular spacing is.

The fifth order maximum, meanwhile

asinθ = mλ

asinθ = 5λ

Solving as,

5λ = 3 * 690

λ = 414 nm

Therefore, 414 nm is the value of the unknown wavelength.

To know more about Wavelength visit:

https://brainly.com/question/13533093

#SPJ4

This statement is False because Solid-state sensors are used in place of a water - absorbing element in electronic humidistats. A damper in the bypassed duct is closed during the summer period to stop airflow.

Hygroscopy - A material is said to be hygroscopic if it has the capacity to adsorb and retain water or water from its immediate surroundings. Examples include ethanol, glycerin, concentrated sulfuric acid, honey, silica gel, and methanol.

Around the soil particles, some water in the soil creates an incredibly thin, firmly held layer. It's referred to as hydroscopic water. A little amount of water in the soil is chemically linked to soil components in the soil. We refer to it as mixed water.

To know more about hygroscopic visit:

https://brainly.com/question/15743598

#SPJ4

The degeneracies of the first, fourth and fifth energy levels for the three dimensionsal cubical box are 1, 3 and 1.

Calculation :

Given Data

A three-dimensional cubic box with

lx=ly=lz=Li.

For a 3D cubic box, the energy of the particle in a box is having a formula given below,

E3D=h²8m(n²x/l²x+n²y/l²y+n²z/l²z)

Given,

lx=ly=lz=Li, put in the above equation, we get,

E3D=h²/8m(n²x/L²+n²y/L²+n²z/L²)

E3D=h²/8mL²(n²x+n²y+n²z)

Now, for the First energy level, the energy will be,

E3D=h²/8mL²(1²+1²+1²)

E3D=3h²/8mL²

The degeneracy is equal to 1 because nx=ny=nz=1.

Now, for the Fourth energy level, the energy will be,

E3D=h²/8mL²(1²+1²+3²)

E3D=h²/8mL²(1+1+9)

E3D=11h²8mL²

The degeneracy is equal to 3 because, nx=1,ny=1,nz=3,nx=1,ny=3,nz=1 and nx=3,ny=1,nz=1.

Now, for the Fifth energy level, the energy will be,

E3D=h²/8mL²(2²+2²+2²)

E3D=h²/8mL²(4+4+4)

E3D=12h²/8mL²

The degeneracy is equal to 1 because nx=2,ny=2,nz=2.

Therefore, the degeneracies of the first, fourth and fifth energy levels are 1, 3 and 1.

Energy levels are degenerate if they correspond to two or more different measurable states of a quantum system. Conversely, two or more distinct states of a quantum mechanical system are said to be degenerate if they have the same energy value when measured. The number of different states corresponding to a particular energy level is called the degeneracy of the level.

Learn more about degeneracy energy levels here : https://brainly.com/question/14439838

#SPJ4

The induced current in the loop of the copper wire is found to be 7.85 mA.

The single loop of the copper wire is lying in flat plane and the magnetic field is pointing perpendicular to the plane of the loop. The area of the loop is given to be 7.8cm²

The magnetic field initially has a magnitude of 0.500 Tesla and it finally increases manner to grow to a magnitude of 3.50 Tesla in a time 1.10 seconds.

The induced EMF in the circuit will be given by the relation,

E = A∆B/∆T

Where,

B is magnetic field,

A is the area and T is the time taken.

Putting all the values,

E = 0.00078×(3.5-0.5)/1.1

E = 21.2mV.

The resistance in the copper loop is given to be 2.7 ohm.

Now, the induced current in the circuit will be given by the relation,

I = E/R

Putting all the values

I = 21.2/2.7

I = 7.85 mA.

So, the induced current in the wire is 7.85 milliamps.

To know more about induced current, visit,

https://brainly.com/question/27605406

#SPJ4

A roller coaster starts from rest at point  is option C) the kinetic energy of the coaster at C will be equal to its potential energy at A.

Since Two objects are sliding at the same speed across a wooden surface. The  distance traveled by the second object is option B) 2S

A person's weight measured in the elevator immediately after the elevator starts to fall is option E) zero A force F produces an acceleration a on an object of mass m.

The mass of the second object is option D) (3/8)m.

The amount of kinetic energy change and the amount of potential energy change are identical in all physical processes that take place in closed systems. When the kinetic energy rises, the potential energy falls, and vice versa.

Wave speed is the number of meters a wave travels in a second, or the distance a wave travels in a particular amount of time. Equation Speed = Wavelength x Frequency describes how wave speed relates to wave wavelength and wave frequency.

Therefore, When wavelength and frequency are known potential energy stored energy that depends on the relative positions of different components of a system may be utilized to compute wave speed—this equation can be used to determine wave speed. When stretched or squeezed, a spring has higher potential energy.

Learn more about force from

https://brainly.com/question/14543691
#SPJ1

The amplitude is 0.25s.

Calculation:

Amplitude = A = 0.225 m

Angular frequency = w = 8π rad/s.

Frequency = f = w/2π = 8π/2πHZ = 4 HZ

Time period = T = 1/f = (1/4)s = 0.25s.

The maximum displacement or distance traveled by a point on an oscillating body or shaft, measured from the equilibrium position. This corresponds to half the length of the vibration path. Amplitude difference between a rest position and maximum shaft deflection.

Frequency The number of waves passing a particular point per second. Duration  How long it takes for a wave cycle to complete. Sound wave amplitude is a measure of wave height. The amplitude of a sound wave can be defined as the magnitude or loudness of the maximum displacement from the average position of the vibrating particles in the medium when the sound was produced.

Learn more about The amplitude here:- https://brainly.com/question/3613222

#SPJ4

The spring and pan have very little mass. The mass executes a SHM when it is lightly squeezed and then released.

Forces, location, velocity, and energy—both kinetic and potential energy—are some examples of these quantities. Hoare's Rule. Energy conservation: When the compressed spring returns to its natural length, all of the energy that was stored in it is transformed into kinetic energy. The block is propelled along a horizontal surface as the spring is let go. Friction and the spring's bulk can be disregarded. Between two blocks with masses of 1 kg and 2 kg that are lying on a smooth horizontal surface is a compressed elastic spring. The block is freed from rest once the spring has been compressed by 2.0 cm.

to know more about spring please visit.

https://brainly.com/question/14159361

#SPJ4

Answer:

Newton's first law: An object at rest remains at rest, or if in motion, remains in motion at a constant velocity unless acted on by a net external force.

In this case, we are given that the rod is subjected to the force system shown in the figure. There is a vertical force F acting on the rod at point A, as well as a horizontal force P. The rod is also subjected to a moment M about the z-axis.

To determine the stress components that act at point A, we need to consider the forces that are acting on a small volume element located at this point.

The stress on a volume element is defined as the force acting on the element per unit area. The stress components at a point can be represented by a stress tensor, which is a 3x3 matrix with nine elements. The diagonal elements of the stress tensor represent the normal stress components, while the off-diagonal elements represent the shear stress components.

To determine the stress components at point A, we need to consider how these forces are distributed over the surface of the volume element. The normal stress components can be found by considering the forces acting perpendicular to the surface of the element. The shear stress components can be found by considering the forces acting tangent to the surface of the element.

For example, the normal stress component in the x-direction at point A can be found by considering the force F acting perpendicular to the surface of the element in the y-direction. The normal stress component in the y-direction at point A can be found by considering the force P acting perpendicular to the surface of the element in the x-direction. The shear stress component in the XY-plane at point A can be found by considering the moment M acting tangent to the surface of the element.

To determine the specific values of the stress components, we would need to know the dimensions of the volume element, as well as the magnitudes of the forces and moments acting on the rod. With this information, we can use the equations of statics to solve for the stress components at point A.

Learn more about stress at

https://brainly.com/question/29562047?referrer=searchResults

#SPJ4

1.25 cm is the height of the image. 160 cm separates a converging lens with such a 40 cm focal length from a diverging lens with the a -40 cm focal length. The converging lens is 60 cm away from a 2.5 cm tall item.

A lens that conforms a parallel source beam of light is known as a converging lens. One kind of converging lens is a double convex lens. Converging Lens A lens that separates a parallel light beam is known as a diverging lens. Diverging lenses include those that are double concave.

For the diverging lens, this image height corresponds to object height. We obtain h ′D=(20cm40cm)(5.0cm)=1.25cm again for diverging lens as a result.

To know more about  converging lens visit:

https://brainly.com/question/28348284

#SPJ4

The force necessary to lift an object is the same as the force necessary to fight gravity.

We may calculate the gravitational force acting on the object using Newton's second law if we assume that the acceleration caused by gravity is 9.8ms2. By exerting force that is produced by the person's muscles, the weights are raised. It is therefore a muscular force. Lift can be in any direction with respect to gravity, contrary to the popular understanding of the word, which defines it with respect to the direction of flow rather than the direction of gravity. If the force on an object's bottom is greater than the force of gravity coming from above, lift will result. Lift must equal gravity for a height to be sustained.

to know more about force please visit.

https://brainly.com/question/13191643

#SPJ4

(a) The angular speed of the new system is 2.455 rad/s.

(b) The angular speed of the new system is 1.64 rad/s.

(a) The Angular Momentum Conservation Principle is observed since there are no outside forces acting on either disk.The fact that the axes of rotation of each disk coincide allows for the principle to be reduced to its scalar version. The ratio of the inertial moment to the angular speed determines the angular momentum's size. The moment of inertia doubles and the angular speed is cut in half as soon as both disks start to revolve.

It is given by, I ω₀ = 2* I * ωf

Where,

I - Moment of inertia of a disk, measured in kilogram-square meter

ω₀ - Initial angular speed, measured in radians per second

ωf - Final angular speed, measured in radians per second

The expression for relating final angular speed to initial angular speed is,

ωf = 1/2 * ω₀

Given that, ω₀ = 4.91 rad/s

The new system's angular speed is,

ωf = 1/2 * 4.91 = 2.455 rad/s

(b) If third such disk is dropped on the first two, the expression on angular velocity becomes,

I ω₀ = 3* I * ωf

ωf = 1/3* ω₀ = 1/3* 4.91 = 1.64 rad/s.

To know more about angular speed:

https://brainly.com/question/16902383

#SPJ4

The electric field strength in volts per meter is calculated to be 4.095 V/m.

Given that, speed v = 3.9 * 10 m/s

Magnetic field B = 0.105 T

Using the mass spectrometer velocity selector relationship between the electric field and magnetic field is,

v = E/B

Where,

v is the speed selector

B is magnetic field

E is electric field

Therefore, E = vB

E = 3.9 × 10 × 0.105

E = 4.095 V/m

Thus, electric field E is 4.095 V/m.

The question is incomplete. The complete question is 'What is the electric field strength in volts per meter?'

To know more about electric field:

https://brainly.com/question/15414535

#SPJ4

Note that for a severe supercell ts to form over the great plains, one would expect the 5,000 AGL wind to be 190/45kts (Option D)

A supercell thunderstorm is distinguished by the presence of a mesocyclone, which is a deep, continually revolving updraft. As a result, these storms are sometimes known as spinning thunderstorms.

Supercells are storms that have updrafts that spin along a vertical axis and are generally but not always thunderstorms. This rotation is caused by shear in the environmental wind field (a change in wind direction and/or speed with height) that surrounds the storm as it grows.

Supercell thunderstorms are intense, long-lived storms that are characterized by strong wind shear and rotational dynamics.

The wind shear, or the change in wind speed and direction with height, is a key factor in the development and maintenance of supercell thunderstorms.

Note that AGL means Above Ground Level; while

KTS means Knots. Knots are a unit measurement of speed. I nautical mile is usually equated to one knot.

Learn more about Supercells;
https://brainly.com/question/401575?
#SPJ1

The following vectors best describes the path of the airplane Aniseed of the as plan is 528 [tex]\mathrm{mi} / \mathrm{hr}[/tex]

What is airplane?

A fixed-wing aircraft that is pushed forward by the thrust of a jet engine, propeller, or rocket engine is known as an aeroplane or aeroplane. There are many different sizes, forms, and wing arrangements for airplanes.

[tex]\text { bearing } 25^{\circ} \text { west of north }[/tex]

[tex]\text { Since } \quad 90^{\circ}+25^{\circ}=115^{\circ}[/tex]

[tex]\text { so path of the airplane is }[/tex]

[tex]\left.v=528 \cos \left(i 15^{\circ}\right) i+528 \sin \left(115^{\circ}\right)\right][/tex]

To learn more about airplane visit

https://brainly.com/question/17247837

#SPJ4