a team of engineers has decided to design a new shoe for people suffering from a painful foot condition. What should the engineers do during the planning stage

Answer:

it is propane

C3H8 it is propane

The Full name of the given compound is Propane.

Propane is a three-carbon alkane with the molecular formula C₃H₈.

It is a gas at standard temperature and pressure, but compressible to a transportable liquid.

In the figure given ;

In the given figure, there is single bond present between Carbon and Hydrogen. Hence, The Full name of the given compound is Propane.

Learn More about hydrocarbon here ;

https://brainly.com/question/14049901

#SPJ2

Answer:

Explanation:

B.

by breaking the bonds between atoms in molecules

Answer:

A Standard Hydrogen Electrode is an electrode that scientists use for reference on all half-cell potential reactions. The value of the standard electrode potential is zero, which forms the basis one needs to calculate cell potentials using different electrodes or different concentrations. It is important to have this common reference electrode, just as it is important for the International Bureau of Weights and Measures to keep a sealed piece of metal that is used to reference the S.I. Kilogram.

Answer:

The role of an electrode as cathode or anode depends on the nature and electrode potential of the other electrode with which it forms the complete electrochemical cell.

When a cell is to be made with zinc electrode and hydrogen electrode, the hydrogen electrode will behave as a cathode and the zinc electrode will behave as anode because zinc is present above hydrogen in the activity series. That is zinc is more electropositive than hydrogen.

If the cell is made with a copper electrode and hydrogen electrode, the hydrogen electrode will behave as anode and the copper electrode as a cathode. This is due to the fact that Cooper is present below hydrogen in the activity series. Copper is less electropositive than hydrogen.

Explanation:

Answer:

0.0365 is your answer

Explanation:

Answer:

365.2gㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤ

Answer:

kr

Explanation:

it is radioactive so it loss electron due to which it jas most neutons

Answer:

maybe number b is correct. ...thank you

Answer:

a Leaning towards the speaker

Explanation:

here's the answer to your question

Answer:

removing the electron.

The term that would change the element represented in the electron module is removing the electron​. The correct option is d.

Chemical elements are the elements that are represented in the periodic table. There are 118 chemical elements discovered and represented in the periodic table. There are many more to be discovered.

The model is of an element. Elements are made up of atoms, and atoms contain charged particles. Out of these particles, electrons are revolved around the nucleus, which determined the atomic number of the element, and different elements have different numbers of electrons.

Removing the electron from the element, will change the element or change its atomic number.

Thus, the correct option is d. removing the electron​.

To learn more about Chemical elements, refer to the link:

https://brainly.com/question/11064416

#SPJ2

Answer:

65.5J

Explanation:

ML=Q

ML=MC(change in temperature)

0.75 X 23000 =0.75 X 351 X C

C= 65.5J

The energy supplied to the lead to melt from 21°c to its melting point is 51521 Joules.

Specific heat is the amount of heat energy supplied to change the temperature of one unit mass of a substance by 1 °C. The SI unit of the specific heat capacity of a substance is J/Kg.

The mathematical expression for the specific heat capacity can be written as:

Q = mCΔT      Where C is the specific heat of the substance.

The specific heat capacity depends upon the starting temperature and is an intensive characteristic of the material.

Given, the melting point of the lead T₂ = 327.5° C

The initial temperature of the lead, T₁ = 21° C

The latent heat of the lead given, L = 230000 J/Kg K

The specific heat of the lead, C = 130 J/Kg K

The heat required to melt the lead from 12°C to 327.5 °C is :

Q = m× [C × (T₂ - T₁) + L ]

Q = 0.75 × [0.130 (327.5 - 21)  + 23000]

Q = 51521 J

Learn more about specific heat, here:

brainly.com/question/11297584

#SPJ5

Answer:

c. 2,2-dichloropentane.

Explanation:

Hello there!

In this case, according to the given information, it turns out possible for us to firstly draw the structure of the reactant, pent-1-yne:

[tex]CH\equiv C-CH_2-CH_2-CH_2[/tex]

Now, we infer the halogen is added to the carbon atom with the most carbon atoms next to it, in this case, carbon #2, in order to write the following product:

[tex]CH\equiv C-CH_2-CH_2-CH_2+2HCl\rightarrow CH_3- CCl_2-CH_2-CH_2-CH_2[/tex]

Whose name is 2,2-dichloropentane.

Regards!

Answer:

89.04 g of NaNO₃.

Explanation:

We'll begin by converting 838 mL to L. This can be obtained as follow:

1000 mL = 1 L

Therefore,

838 mL = 838 mL × 1 L / 1000 mL

838 mL = 0.838 L

Next, we shall determine the number of mole of NaNO₃ in the solution. This can be obtained as follow:

Volume = 0.838 L

Molarity = 1.25 M

Mole of NaNO₃ =?

Mole = Molarity × volume

Mole of NaNO₃ = 1.25 × 0.838

Mole of NaNO₃ = 1.0475 mole

Finally, we shall determine the mass of NaNO₃ needed to prepare the solution. This can be obtained as follow:

Mole of NaNO₃ = 1.0475 mole

Molar mass of NaNO₃ = 23 + 14 + (16×3)

= 23 + 14 + 48

= 85 g/mol

Mass of NaNO₃ =?

Mass = mole × molar mass

Mass of NaNO₃ = 1.0475 × 85

Mass of NaNO₃ = 89.04 g

Therefore, 89.04 g of NaNO₃ is needed to prepare the solution.

C₆H₁₂O₆ is the molecular formula of gulcozo.

Izopropanol doesn't form by Hydration of propene.

Acetone, propanone, or dimethyl ketone, exists as an organic compound with the formula (CH₃)₂CO. It stands for the simplest and smallest ketone. Reduction of ketones can be accomplished by hydrogenation (or) utilizing Grignard Reagent. Let us now decrease propanone to propan-2-ol by hydrogenation. The reduction of propane in the existence of catalyst platinum along with hydrogen provides the product propan-2-ol.

The correct answer is option A.

Izopropanol doesn't form by Hydration of propene.

Learn more about Reduction of propan-2-one, refer:

https://brainly.com/question/14405249

#SPJ2

Dynamic equilibrium is showed at the point at which solid liquid and gas intersect.

At the point at which solid liquid and gas intersect represents a system that shows dynamic equilibrium. There is equal amount of reactants and products at the point of dynamic equilibrium because the transition of substances occur between the reactants and products at equal rates, means that there is no net change. Reactants and products are formed at the rate that no change occur in their concentration.

https://brainly.com/question/24310467

Answer:

Following are the response to the given question:

Explanation:

In the given scenario, When the balance has never been tainted before the KHP is weighted, which can affect the molar concentration of NaOH because its molarity is directly proportional to the weight including its substance. In this question it is the mistake is systemic because it may be corrected by modifying balancing parameters.

Answer:

66.67%

Explanation:

From the given information:

mass of cyclohexane = 2.9949 grams

density of cyclohexane = 0.779 g/mL

Recall that:

Density = mass/volume

∴

Volume = mass/density

So, the volume of cyclohexane = 2.9949 g/ 0.779 g/mL

= 3.8445 mL

Also,

mass of propylbenzene = 1.6575 grams

density of propylbenzene = 0.862 g/mL

Volume of propylbenzene =  1.6575 g/ 0.862 g/mL

= 1.9229 mL

The volume % composition of cyclohexane from the mixture is:

[tex]= (\dfrac{v_{cyclohexane}}{v_{cyclohexane}+v_{propylbenzene}})\times 100[/tex]

[tex]= (\dfrac{3.8445}{3.8445+1.9229})\times 100[/tex]

[tex]= (\dfrac{3.8445}{5.7674})\times 100[/tex]

= 66.67%

Answer:

25.88 g/mol

Explanation:

Graham's law is a famous law which states that the diffusion rate or the effusion rate of any gas varies inversely to the square root of the molecular weight the gas.

So from Graham's law, we have,

[tex]$\frac{\text{time}}{M^{1/2}}=\text{constant}$[/tex]

Using the sample of Kr gas having M = 83.8

[tex]$\frac{8.15}{(83.8)^{0.5}}= \frac{4.53}{M^{0.5}}$[/tex]

[tex]$M^{0.5}= 5.088$[/tex]

M = 25.88 g/mol

Answer:

59.8 g of PbSO₄.

Explanation:

The balanced equation for the reaction is given below:

Pb + PbO₂ + 2H₂SO₄ —> 2PbSO₄ + 2H₂O

Next, we shall determine the mass of PbO₂ that reacted and the mass of PbSO₄ produced from the balanced equation. This can be obtained as follow:

Molar mass of PbO₂ = 207 + (16×2)

= 207 + 32

= 239 g/mol

Mass of PbO₂ from the balanced equation = 1 × 239 = 239 g

Molar mass of PbSO₄ = 207 + 32 + (16×4)

= 207 + 32 + 64

= 303 g/mol

Mass of PbSO₄ from the balanced equation = 2 × 303 = 606 g

SUMMARY:

From the balanced equation above,

239 g of PbO₂ reacted to produce 606 g of PbSO₄.

Finally, we shall determine the mass of PbSO₄ that will be produced by the reaction of 23.6 g of PbO₂. This can be obtained as follow:

From the balanced equation above,

239 g of PbO₂ reacted to produce 606 g of PbSO₄.

Therefore, 23.6 g of PbO₂ will react to produce = (23.6 × 606) / 239 = 59.8 g of PbSO₄.

Thus, 59.8 g of PbSO₄ were obtained from the reaction.

Answer: See explanation

Explanation:

The calibration curve is the method used for the determination of the concentration of a substance such that the unknown sample will be compared to some standard samples of the known concentration.

To prepare a standard (calibration) curve for a spectroscopy experiment, start by preparing (multiple solutions) with (different known concentrations). Then, measure the (absorbance) of each solution at (thesame wavelength) and create a plot of (absorbance vs. concentration) for the measured values. Finally, find the best-fit line of the data set.

Answer:

Hence the Solubility product,  

Ksp = [Ca2+] [Cl-]2  

or, Ksp = (4.5) (9)2  

or, Ksp = 364.5

Explanation:  

Mass of CaCl2 = 4.99 g  

Molar mass of CaCl2 = 110.98 g/mol  

Moles of CaCl2  

= given mass/ molar mass  

= 4.99/ 110.98  

= 0.045  

Volume = 10.0 mL = 0.01 L  

CaCl2 dissociates into its ion as:  

CaCl2 (s)  \rightleftharpoons Ca2+ (aq) + 2 Cl- (aq)  

At 90°C, the solution is saturated with Ca2+ and Cl- ions.

Moles of Ca2+ = Moles of CaCl2 dissolved = 0.045  

Moles of Cl- = 2 x ( Moles of CaCl2 dissolved) = 2 x 0.045 = 0.09

[Ca2+] = Moles/ Volume = 0.045/ 0.01 = 4.5 M  

[Cl-] = 0.09/ 0.01 = 9 M  

Solubility product,  

Ksp = [Ca2+] [Cl-]2  

or, Ksp = (4.5) (9)2  

or, Ksp = 364.5

Answer:

A. Reactants change into products

Answer:

a)  [tex]V_1=5ul[/tex]

b)  [tex]v=20ul[/tex]

Explanation:

From the question we are told that:

initial Concentration [tex]C_1=50mg/ml[/tex]

Final Concentration [tex]C_2=10mg/ml[/tex]

Final volume needs [tex]V_2 =25ul[/tex]

Generally the equation for Volume is mathematically given by

[tex]C_1V_1=C_2V_2[/tex]

[tex]V_1=\frac{C_1V_1}{C_2}[/tex]

[tex]V_1=\frac{10*25}{50}[/tex]

[tex]V_1=5ul[/tex]

Therefore

The volume of buffer needed is

[tex]v=V_2-V_1\\\\v=25-5[/tex]

[tex]v=20ul[/tex]

Answer:

Propane (C3H8) reacts with Oxygen gas to form Carbon Dioxide and water.

a. If 2.8 moles of Propane reacts with excess Oxygen gas how many grams of CO2 will be formed?

b. How many grams of Oxygen gas will completely react with 3.8 moles of Propane?

c. If 25 g of C3H8 reacts with excess Oxygen, how many moles of water will be formed?

d. If 38 g of water are produced in the reaction, how many moles of CO2 were produced?

Answer:

The answer is D which is Selenium

There are various variants of Cov id virus. The Brazilian variant P also known as Gamma variant is the third variant of the original SARS-CoV2.

The correct answer is more negative

This variant has raised concerns since it has ability to spread more quickly then previous variants and this is more negative variant.

It is assumed that Cov id variant Gamma and Delta has ability to absorb move UV light but this is not proved yet and research is underway.

Learn more at https://brainly.com/question/24319270

Answer:

Explanation:

From the given information:

The surface area of the can = (30 × 20 × 2) +(20× 15 × 2) +(30 × 15 × 2)

= 1200 + 600 + 900

= 2700 cm²

Since 1 inch² = 0.155 inch²

The surface area in inches² = 2700 × 0.155 inch²

= 418.5 inches²

The total force can be determined by using the expression:

Force = Pressure ×Area

Force = 14.7 psi ×  418.5 inches²

Force = 6151.95 lbs

Yes, the gasoline can will be able to withstand the force.

Answer:

21.3 g. Option B

Explanation:

The reaction is:

4HF(g) + SiO₂(s) → SiF₄(g) + 2H₂O(g)

We analysed it and it is correctly balanced.

4 moles of hydrogen fluoride react to 1 mol of silicon dioxide in order to produce 1 mol of silicon fluoride and 2 moles of water vapor.

We determine molar mass of each reactant:

HF → 1.01 g/mol + 19 g/mol = 20.01 g/mol

SiO₂ → 16 g/mol . 2 + 28.09 g/mol = 60.09 g/mol

We convert mass to moles: 16 g . 1 mol /60.09g = 0.266 moles of glass

Ratio is 1:4. 1 mol of glass react to 4 moles of HF

Our 0.266 moles may react to (0.266 . 4) / 1 = 1.07 moles of gas

We convert moles to mass: 1.07 mol . 20.01 g/mol = 21.3 g

Answer:

the answer is C

Explanation: