A magnetic field of 0.080 T is in the y-direction. The velocity of wire segment S has a magnitude of 78 m/s and components of 18 m/s in the x-direction, 24 m/s in the y-direction, and 72 m/s in the z-direction. The segment has length 0.50 m and is parallel to the z-axis as it moves.

Required:
a. Find the motional emf induced between the ends of the segment.
b. What would the motional emf be if the wire segment was parallel to the y-axis?

Answer:

 B = 1.1413 10⁻² T

Explanation:

We use energy concepts to calculate the proton velocity

starting point. When entering the electric field

        Em₀ = U = q V

final point. Right out of the electric field

        em_f = K = ½ m v²

energy is conserved

       Em₀ = Em_f

       q V = ½ m v²

       v = [tex]\sqrt{2qV/m}[/tex]

we calculate

       v = [tex]\sqrt{\frac{ 2 \ 1.6 \ 10^{-19} \ 300}{1.67 \ 0^{-27}} }[/tex]

       v = [tex]\sqrt{632.3353 \ 10^8}[/tex]

       v = 25.15 10⁴ m / s

now enters the region with magnetic field, so it is subjected to a magnetic force

        F = m a

the force is

       F = q v x B

as the velocity is perpendicular to the magnetic field

       F = q v B

acceleration is centripetal

       a = v² / r

we substitute

       qvB =1/2  m v² / r

       B =  v[tex]\frac{m v}{2 q r}[/tex]

we calculate

       B = [tex]\frac{1.67 \ 10^{-27} 25.15 \ 10^4 }{1.6 \ 10^{-19} 0.23}[/tex]

       B = 1.1413 10⁻² T

Answer:

7.5 kg

Explanation:

We are given that

[tex]m_1=10 kg[/tex]

Length of plank, l=3 m

Distance of fulcrum from one end of the plank=1 m

[tex]m_2=20 kg[/tex]

We have to find the mass must be on the other end if the plank remains balanced.

Let m be the mass must be on the other end if the plank remains balanced.

In balance condition

[tex]20\times 1=10\times (1.5-1)+m\times (1.5+0.5)[/tex]

[tex]20=10(0.5)+2m[/tex]

[tex]20=5+2m[/tex]

[tex]2m=20-5=15[/tex]

[tex]\implies m=\frac{15}{2}[/tex]

[tex]m=7.5 kg[/tex]

Hence, mass 7.5 kg   must be on the other end if the plank remains balanced.

Answer:

The mass at the other end is 7.5 kg.

Explanation:

Let the mass is m.

Take the moments about the fulcrum.

20 x 1 = 10 x 0.5 + m x 2

20 = 5 + 2 m

2 m = 15

m = 7.5 kg

Light energy is part of a larger form of energy known as electromagnetic energy. Details about electromagnetic energy can be found below.

Electromagnetic spectrum is the entire range of wavelengths of all known electromagnetic radiations extending from gamma rays through visible light, infrared, and radio waves, to X-rays.

Visible light is the part of the electromagnetic spectrum, between infrared and ultraviolet, that is visible to the human eye.

Therefore, Light energy is part of a larger form of energy known as electromagnetic energy.

Learn more about electromagnetic spectrum at: https://brainly.com/question/23727978

#SPJ1

Answer:

They established the laws of planetary motion. They explained how the Sun rises and sets. They made astronomy accessible to people who spoke Italian.

Explanation:

(b) Use Newton's second law. The net forces on block M are

• ∑ F (horizontal) = T - f = Ma … … … [1]

• ∑ F (vertical) = n - Mg = 0 … … … [2]

where T is the magnitude of the tension, f is the mag. of kinetic friction between block M and the table, a is the acceleration of block M (but since both blocks are moving together, the smaller block m also shares this acceleration), and n is the mag. of the normal force between the block and the table.

Right away, we see n = Mg, and so f = µn = 0.2Mg.

The net force on block m is

• ∑ F = mg - T = ma … … … [3]

You can eliminate T and solve for a by adding [1] to [3] :

(T - 0.2Mg) + (mg - T ) = Ma + ma

(m - 0.2M) g = (M + m) a

a = (10 kg - 0.2 (20 kg)) (9.8 m/s²) / (10 kg + 20 kg)

a = 1.96 m/s²

We can get the tension from [3] :

T = m (g - a)

T = (10 kg) (9.8 m/s² - 1.96 m/s²)

T = 78.4 N

(c/d) No time duration seems to be specified, so I'll just assume some time t before block M reaches the edge of the table (whatever that time might be), after which either block would move the same distance of

1/2 (1.96 m/s²) t

(e) Assuming block M starts from rest, its velocity at time t is

(1.96 m/s²) t

(f) After t = 1 s, block M reaches a speed of 1.96 m/s. When the string is cut, the tension force vanishes and the block slows down due to friction. By Newton's second law, we have

∑ F = -f = Ma

The effect of friction is constant, so that f = 0.2Mg as before, and

-0.2Mg = Ma

a = -0.2g

a = -1.96 m/s²

Then block M slides a distance x such that

0² - (1.96 m/s²) = 2 (-1.96 m/s²) x

x = (1.96 m/s²) /  (2 (1.96 m/s²))

x = 0.5 m

(I don't quite understand what is being asked by the part that says "calculate the time taken to contact block M and pulley" …)

Meanwhile, block m would be in free fall, so after 1 s it would fall a distance

x = 1/2 (-9.8 m/s²) (1 s)

x = 4.9 m

The acceleration will increase by 61.3%.

Explanation:

The centripetal acceleration [tex]a_c[/tex] is given by

[tex]a_c = \dfrac{v^2}{r}[/tex]

If the velocity of the object increases by 27.0%, then its new velocity v' becomes

[tex]v' = 1.270v[/tex]

The new centripetal acceleration [tex]a'_c[/tex] becomes

[tex]a'_c = \dfrac{(1.270v)^2}{r} = 1.613 \left(\dfrac{v^2}{r} \right)[/tex]

[tex]\:\:\:\:\:\:\:\:\:= 1.613a_c[/tex]

Answer:

1 eV = 1.60 * 10^-19 J      work done in accelerating electron thru 1 V

KE (total energy) = 1350 ^ 1 eV     (note proton goes from +  to -)

KE = 1.60 * 10^-19 * 1350 = 2.16 * 10^-16 Joules

1/2 m v^2 = KE = 2.16 * 10^-16 J

v^2 = 4.32 * 10E-16 / 1.67 * 10-27 = 2.59 * 10^11

v = 5.09 * 10^5 m/s

The proton's kinetic energy, in joules is  2.16 *[tex]10^{-16}[/tex] J. The proton's velocity is 5.09 * [tex]10^{5}[/tex]m/s.

When an item is moving, its velocity is the rate at which its direction is changing as seen from a certain point of view and as measured by a specific unit of time.

Uniform motion an object is said to have uniform motion when object cover equal distance in equal interval of time within exact fixed direction. For a body in uniform motion, the magnitude of its velocity remains constant over time.

1 eV = 1.60 * [tex]10^{-19} J[/tex]     work done in accelerating electron throw 1 V

K.E (total energy) = 1350 ^ 1 eV     (note proton goes from +  to -)

K.E = 1.60 * [tex]10^{-19}[/tex]J * 1350 = 2.16 * [tex]10^{-16}[/tex] Joules

1/2 m v² = KE = 2.16 *[tex]10^{-16}[/tex] J

Velocity of proton is,

v² = 4.32 * 10[tex]e^{-16}[/tex] / 1.67 * [tex]10{-27}[/tex] = 2.59 * [tex]10^{11}[/tex]

v = 5.09 * [tex]10^{5}[/tex]m/s

The proton's kinetic energy, in joules is  2.16 *[tex]10^{-16}[/tex] J. The proton's velocity is 5.09 * [tex]10^{5}[/tex]m/s.

To learn more about velocity refer the link:

brainly.com/question/18084516  

#SPJ2

I assume the blocks are pushed together at constant speed, and it's not so important but I'll also assume it's the smaller block being pushed up against the larger one. (The opposite arrangement works out much the same way.)

Consider the forces acting on either block. Let the direction in which the blocks are being pushed by the positive direction.

The 2.0-kg block feels

• the downward pull of its own weight, (2.0 kg) g

• the upward normal force of the surface, magnitude n₁

• kinetic friction, mag. f₁ = 0.30n₁, pointing in the negative horizontal direction

• the contact force of the larger block, mag. c₁, also pointing in the negative horizontal direction

• the applied force, mag. F, pointing in the positive horizontal direction

Meanwhile the 3.0-kg block feels

• its own weight, (3.0 kg) g, pointing downward

• normal force, mag. n₂, pointing upward

• kinetic friction, mag. f₂ = 0.30n₂, pointing in the negative horizontal direction

• contact force from the smaller block, mag. c₂, pointing in the positive horizontal direction (this is the force that is causing the larger block to move)

Notice the contact forces form an action-reaction pair, so that c₁ = c₂, so we only need to find one of these, and we can get it right away from the net forces acting on the 3.0-kg block in the vertical and horizontal directions:

• net vertical force:

n₂ - (3.0 kg) g = 0   ==>   n₂ = (3.0 kg) g   ==>   f₂ = 0.30 (3.0 kg) g

• net horizontal force:

c₂ - f₂ = 0   ==>   c₂ = 0.30 (3.0 kg) g ≈ 8.8 N

Answer: -5×10-3

Explanation:

E=kq/r

Answer: a rippling fountain

Explanation: diffuse reflection happens on rough surfaces, so using the process of elimination, that leaves us with b, a rippling fountain (I also just took this test I'm pretty sure I'm right)

Answer: The correct statement is:

--> The voltage across each resistor is the same.

Explanation:

RESISTORS are defined as the components of an electric circuit which are capable of creating resistance to the file of electric current in the circuit. They work by converting electrical energy into heat, which is dissipated into the air. These resistors can be divided into two according to their arrangements in the electric cell. It include:

--> Resistors in parallel and

--> Resistors in series

RESISTORS are said to be in parallel when two or more resistance or conductors are connected to common terminals so that the potential difference ( voltage) across each conductor IS THE SAME but with different current flow through each of them. Also, Individual resistances diminish to equal a smaller total resistance rather than add to make the total.

Answer:

The correct answer is "[tex]4.49\times 10^{10} \ joules[/tex]".

Explanation:

According to the question,

The work will be:

⇒ [tex]Work=-\frac{kQq}{R}[/tex]

              [tex]=-\frac{1}{4 \pi \varepsilon \times (18-30)\times 3\times 0.2}[/tex]

              [tex]=-\frac{1}{4 \pi \varepsilon \times (-12)\times 3\times 0.2}[/tex]

              [tex]=\frac{0.3978}{\varepsilon }[/tex]

              [tex]=4.49\times 10^{10} \ joules[/tex]

Thus the above is the correct answer.    

We have that the workdone  is mathematically given as

W=4.49*10e10 J

From the question we are told

Generally the equation for the workdone   is mathematically given as

W=-kQq/R

Therefore

0.3978/ε0 =-1/(4πε0*(18-30)*3*0.2

Hence

For more information on Charge visit

https://brainly.com/question/9383604

Answer:

[tex]\frac{r_1}{r_2}=6.9[/tex]

Explanation:

According to Pascal's Law, the pressure transmitted from input pedal to the output plunger must be same:

[tex]P_1 = P_2\\\\\frac{F_1}{A_1}=\frac{F_2}{A_2}\\\\\frac{F_1}{F_2}=\frac{A_1}{A_2}\\\\\frac{F_1}{F_2}=\frac{\pi r_1^2}{\pi r_2^2}\\\\\frac{F_1}{F_2}=\frac{r_1^2}{r_2^2}[/tex]

where,

F₁ = Load lifted by output plunger = 2100 N

F₂ = Force applied on input piston = 44 N

r₁ = radius of output plunger

r₂ = radius of input piston

Therefore,

[tex]\frac{r_1^2}{r_2^2}=\frac{2100\ N}{44\ N}\\\\\frac{r_1}{r_2}=\sqrt{\frac{2100\ N}{44\ N}} \\\\\frac{r_1}{r_2}=6.9[/tex]

Answer: hello  below is the missing part of your question

A mass m = 10 kg rests on a frictionless table and accelerated by a spring with spring constant k = 5029 N/m. The floor is frictionless except for a rough patch. For this rough path, the coefficient of friction is μk = 0.49. The mass leaves the spring at a speed v = 3.4 m/s.

answer

x = 0.0962 m

Explanation:

First step :

Determine the length of the rough patch/spot

F = Uₓ (mg)

and  w = F.d = Uₓ (mg)  * d

hence;

d( length of rough patch) = w / Uₓ (mg) = 46.55 / (0.49 * 10 * 9.8) = 0.9694 m

next :

work done on unstretched spring length

Given that block travels halfway i.e. d = 0.9694 / 2 = 0.4847 m

w' = Uₓ (mg)  * d

    = 0.49 * 10 * 9.81 * 0.4847 = 23.27 J

also given that the Elastic energy of spring = work done ( w')

1/2 * kx^2 = 23.27 J

x = [tex]\sqrt{\frac{2*23.27}{5029} }[/tex]  = 0.0962 m

Answer:

W =  343.2 J

Explanation:

Given that,

Mass of bale of hay = 26 kg

Horizontal force exerted = 88 N

Distance moved, d = 3.9 m

Work done, W = Fd

Put all the values,

W = 88 N × 3.9 m

= 343.2 J

So, the work done is 343.2 J.  

Answer:

978.6084 Newton

Explanation:

Given the following data;

To find the weight in Newtown;

Conversion:

1 lb = 4.448220 N

220 lb = 220 * 4.448220 = 978.6084 Newton

220 lb = 978.6084 Newton

Therefore, the weight of the astronaut in Newton is 978.6084.

Weight can be defined as the force acting on a body or an object as a result of gravity.

Mathematically, the weight of an object is given by the formula;

Weight = mg

Where;

Note:

Answer:

a)     a = 27.44 m / s²,  b) a = 5.39 m / s², c)  a = 156.8 m / s², cabinet maximum acceleration does not change

Explanation:

a) In this exercise the wheels of the truck rotate to provide acceleration, but the contact point between the ground and the 2 wheels remains fixed, therefore the coefficient of friction for this point is static.

Let's apply Newton's second law

we set a regency hiss where the x axis is in the direction of movement of the truck

Y axis y

        N- W = 0

        N = W = m g

X axis

       2fr = m a

the expression for the friction force is

      fr = μ N

      fr = μ m g

we substitute

      2 μ m g = m /2   a

     a = 4 μ g

      a = 4 0.7 9.8

      a = 27.44 m / s²

b) let's look for the maximum acceleration that can be applied to the cabinet

       fr = m a

       μ N = ma

       μ m g = m a

       a = μ g

       a = 0.55  9.8

       a = 5.39 m / s²

as the acceleration of the platform is greater than this acceleration the cabinet must slip

c) the friction force is in the four wheels as well

With when the truck had two-wheel Thracian the weight of distributed evenly between the wheels, in this case with 4-wheel Thracian the weight must be distributed among all

applying Newton's second law

         4 fr = (m/4) a

         16 mg = (m) a

         a = 16 g

         a = 16 9.8

         a = 156.8 m / s²

cabinet maximum acceleration does not change

Explanation:

static equilibrium means its on the floor or something

so slightly greater than 98 newtons in the upward direction

Answer:

1.66 N

Explanation:

The force of gravity of the moon on the body is given by

F = GMm/R² where G = universal gravitational constant = 6.67 × 10⁻¹¹ Nm²/kg², M = mass of moon = 7.2 × 10²² kg, m = mass of body = 1 kg and R = radius of moon = 1.7 × 10⁶ m

Substituting the values of the variables into the equation, we have

F = GMm/R²

F = 6.67 × 10⁻¹¹ Nm²/kg² × 7.2 × 10²² kg × 1 kg/(1.7 × 10⁶ m)²

F = 48.024 × 10¹¹ Nm²/2.89 × 10¹² m²

F = 16.62 × 10⁻¹ N

F = 1.662 N

F ≅ 1.66 N

So, the gravity on the moon is 1.66 N

Answer:

F = m g sin theta      force accelerating block

m a = m g sin theta

a = 9.8 sin 24 = 3.99 m/sec^2

Answer:

Due to the applied filed the electrons move in a particular direction.

Explanation:

Initially when the switch is off, the free electrons move here and there in any random directions in the conductor with the random speeds called thermal velocity.  So, tat the net flow is almost zero.

When the battery is connected is switch is ON, the random motion of the electrons aligned in a particular direction due to the force applied by the electric filed, so the net flow is not zero it increases and thus the current flow.

Explanation:

The period T of a simple pendulum is given by

[tex]T = 2 \pi \sqrt{\dfrac{l}{g}}[/tex]

Doubling the length of the pendulum gives us a new period T'

[tex]T' = 2 \pi \sqrt{\dfrac{l'}{g}} = 2 \pi \sqrt{\dfrac{2l}{g}}[/tex]

[tex]\:\:\:\:\:\:\:= \sqrt{2} \left(2 \pi \sqrt{\dfrac{l}{g}} \right)[/tex]

[tex]\:\:\:\:\:\:\:= \sqrt{2}\:T = \sqrt{2}(3.5\:\text{s})= 4.95\:\text{s}[/tex]

What

is the the improvetanse of water in our body and how do

Or

open Meet and enter this code

Answer:

Or open Meet and enter this code to the source of definition and how to use it to make

Answer: masses

Explanation:

Trust me

Answer:

P = 0.14 hp

Explanation:

The power required by the ship is given as:

[tex]P = \frac{Work}{Time} = \frac{Potential\ Eenrgy}{t}\\\\P = \frac{mgh}{t}[/tex]

where,

P = Power = ?

m = mass to pump = (12 lb)(1 kg/2.20 lb) = 5.44 kg

g = acceleration due to gravity = 9.81 m/s²

h = height = 2 m

t = time = 1 s

Therefore,

[tex]P = \frac{(5.44\ kg)(9.81\ m/s^2)(2\ m)}{1\ s}\\\\P = 106.8\ W[/tex]

Converting to horsepower (hp):

[tex]P = (106.8\ W)(\frac{1\ hp}{746\ W})[/tex]

P = 0.14 hp

Answer:

The work done on the block by the spring as it accelerates the block is 4kx².

Explanation:

Let initial distance is x.

It was compressed three times farther and then the block is released, new distance is 3x.

The work done in compressing the spring is given by :

[tex]W=\dfrac{1}{2}k(x_2^2-x_1^2)[/tex]

[tex]W=\dfrac{1}{2}k(x_2^2-x_1^2)\\\\W=\dfrac{1}{2}k((3x)^2-x^2)\\\\W=\dfrac{1}{2}k((9x^2-x^2)\\\\W=\dfrac{1}{2}k\times 8x^2\\\\W=4kx^2[/tex]

So, the work done on the block by the spring as it accelerates the block is 4kx².

Answer:

Centripetal Acceleration 18.75 m/s^2, Rotational Kinetic Energy 843.75 J

Explanation:

a Linear acceleration (we cant find tangential acceleration with the givens so we will find centripetal)

a= ω^2*r

ω= 300rev/min

convert into rev/s

300/60= 5rev/s

a= 18.75m/s^2

b) use Krot= 1/2 Iω^2

plug in gives

1/2(30*2.25)(25)= 843.75 J

Answer:

[tex]I_2=30.9A[/tex]

Explanation:

From the question we are told that:

Wire segment [tex]l_s=2.9m[/tex]

Initial Current [tex]I_1=1400A[/tex]

Force [tex]F=2.00N[/tex]

Distance of Wire [tex]d=4.50cm=>0.0450m[/tex]

Generally the equation for Force is mathematically given by

 [tex]F=\frac{\mu_0 * I_1*I_2*l_s}{2 \pi *r}[/tex]

 [tex]F=\frac{4 \pi*10^{-7} *1400 I*I_2*2.9}{2 \pi *0.0450}[/tex]

 [tex]I_2=\frac{22.5*10^-2}{2*10^{-7}*1400*2.6}[/tex]

 [tex]I_2=30.9A[/tex]