Answer:
programmers who are competent in data structures and algorithms can easily perform the tasks related to data processing ,automated reasoning ,or calculations . data structure and algorithms is significant for developers as it shows their problems solving abilities amongst the prospective employers .
Write a program that divides mystery_value by mystery_value #and prints the result. If that operation results in an #error, divide mystery_value by (mystery_value + 5) and then print the result. If that still fails, multiply mystery_value #by 5 and print the result. You may assume one of those three things will work.
1 mystery_value = 5 2 3 #You may modify the lines of code above, but don't move them! 4 #when you submit your code, we'll change these lines to 5 #assign different values to the variables. 6 I 7 #write a program that divides mystery value by mystery_value 8 #and prints the result. If that operation results in an 9 #error, divide mystery value by (mystery_value + 5) and then 10 #print the result. If that still fails, multiply mystery_value 11 #by. 5 and print the result. You may assume one of those three 12 #things will work, 13 # 14 #You may not use any conditionals. 15 # 16 #hint: You're going to want to test one try/except structure 17 #inside another! Think carefully about whether the second 18 #one should go inside the try block or the except block. 19 20 21 #Add your code here! 22
Answer:
mystery_value = 5
try:
print(mystery_value / mystery_value)
except:
try:
print(mystery_value / (mystery_value + 5))
except:
print(mystery_value * 5)
This criterion is linked to a Learning OutcomeCreate checkDuplicates method that receives an array of ints, and an int as parameters. It will return true if the int is found in the array, and false if the int is NOT found in the array. Call the checkDuplicates method from both the MegaMillionsLottery constructor, and the getUserPicks() method.
Answer:
Explanation:
The MegaMillions Lottery class was not provided and neither was the getUserPicks() method. Since they were not found online either, I have created the checkDuplicates method so that it works standalone. Therefore, you can simply call the method from wherever you need by pasting the call line where it needs to be called. A test case has been created in the main method so that you can see the method in action. The output is seen in the attached image below.
public static boolean checkDuplicate(int[] myArr, int element) {
for (int x : myArr) {
if (x == element) {
return true;
}
}
return false;
}
g Palindrome counting. Write a Python program stored in a file q3.py to calculate the number of occurrences of palindrome words and palindrome numbers in a sentence. Your program is case-insensitive, meaning that uppercase and lowercase of the same word should be considered the same. The program should print the palindromes sorted alphanumerically with their number of occurrences. Numbers must be printed first, and words must be printed nex
Answer:
The program is as follows:
sentence = input("Sentence: ")
numbers = []; words = []
for word in sentence.split():
if word.lower() == word[::-1].lower():
if word.isdigit() == False:
words.append(word)
else:
numbers.append(int(word))
words.sort(); numbers.sort()
print(numbers); print(words)
Explanation:
This gets input for sentence
sentence = input("Sentence: ")
This initializes two lists; one for numbers, the other for word palindromes
numbers = []; words = []
This iterates through each word of the sentence
for word in sentence.split():
This checks for palindromes
if word.lower() == word[::-1].lower():
If the current element is palindrome;
All word palindromes are added to word palindrome lists
if word.isdigit() == False:
words.append(word)
All number palindromes are added to number palindrome lists
else:
numbers.append(int(word))
This sorts both lists
words.sort(); numbers.sort()
This prints the sorted lists
print(numbers); print(words)
Assume that the following class is defined. Fill in the missing statements in the most direct possible way to complete the described method. class LooseChange: def __init__(self, value): self.value
Answer:
Already filled
Explanation:
The code above is the syntax for class definition in Python programming language. def __init__(self, value): self.value is definition of the constructor for the class LooseChange. The constructor function in a class is used to instantiate new objects or instances of the class. For example, if we wanted to define a new object of the class LooseChange, we would use the constructor defined in our class LooseChange.
There is an interface I that has abstract class AC as its subclass. Class C inherits AC. We know that C delegates to an object of D to perform some computations. Besides, C consists of two C1s and one C2 as subcomponents. Object of C2 is still reusable when its major component C is depleted. C1 has a method that takes in an object of E as argument. Which one is invalid
Answer:
are u in HS or college work
I am trying to understand
Your new trainee is interested in ACLs (access control lists). He asks you want they can be used for. What should you tell him? A. Protect hosts from viruses.B. Classify network traffic.C. Provide high network availability.D. IP route filtering.
Answer:
B. Classify network traffic.
D. IP route filtering.
Explanation:
An access control can be defined as a security technique use for determining whether an individual has the minimum requirements or credentials to access or view resources on a computer by ensuring that they are who they claim to be.
Simply stated, access control is the process of verifying the identity of an individual or electronic device. Authentication work based on the principle (framework) of matching an incoming request from a user or electronic device to a set of uniquely defined credentials.
Basically, authentication and authorization is used in access control, to ensure a user is truly who he or she claims to be, as well as confirm that an electronic device is valid through the process of verification
Hence, an access control list primarily is composed of a set of permissions and operations associated with a network or file.
In Computer networking, access control lists (ACLs) can be used to perform the following tasks;
I. Classify network traffic: it can be used to classify the different networks on a router and define whether packets are rejected or accepted.
II. Internet protocol (IP) route filtering: any internet protocol (IP) address that's is not on the accept list would be refused permission into accessing a network. Thus, ACLs can either deny or accept IP addresses depending on the routing table configured on the router.
Identify some advantages of using Excel over lists, paper files, or simple word documents? Describe some disadvantages of using Excel over lists, paper files, or simple word documents? Summarize one thing in you home life that could be improved or more easily managed using Excel?
Excel
Excel is a software program that contains spreadsheet. Spreadsheet is an electric document that works numbers and display results in graphs. There are vertical columns and horizontal rows.
they are several advantages of excel which is;
Excel is very efficient to use, especially when you have to calculate your data, it's not hard to calculate the computer itself calculates it for you.they are also disadvantages of excel which is;
some users might get a little bit problem when you send Microsoft Excel, here is one sometimes the spreadsheet are difficult to share internally.Consider a system with seven processes: E, F, G, H, I, J, K and six resources: U, V, W, X, Y, Z. Process E holds U and wants V. Process F holds nothing but wants W. Process G holds nothing but wants V. Process H holds X and wants V and W. Process I holds W and wants Y. Process J holds Z and wants V. Process K holds Y and wants X. Is this system deadlocked?
a. Yes
b. No
Answer:
a. Yes
Explanation:
System is deadlock due to process HIK. Process H holds X and wants V and W. Process I holds W and wants Y. Process K holds Y and wants X. The system will become deadlock due to these three different processes.
convert 198 / 61 to ratio
I think the answer is
198:61
I'm not sure
A chain of dry-cleaning outlets wants to improve its operations by using data from
devices at individual locations to make real-time adjustments to service delivery.
Which technology would the business combine with its current Cloud operations
to make this possible?
O Edge Computing
O Blockchain
O Data Visualization
O Public Cloud
which animal is the computer to store data information and instruction
Answer:
human is the answwr of the quest
Modify the solution to PP 11.1 such that it catches and handles the exception if it is thrown. Handle the exception by printing an appropriate message, and then continue processing more strings.
Answer:
Explanation:
The following code is written in Java. After finding the PP 11.1 file online I added the try/catch to the code as requested by the question. The program takes the input from the user, checks it's length, and if it contains more than 20 characters it throws the exception. This exception states that "the string has more than 20 characters" and then continues processing more strings until the user enters "DONE". The program has been tested and the output can be seen in the attached image below. Due to technical difficulties I have added the code as a txt file below.
In which generation of computers are we in?
ng questions two features of computer .
Explanation:
accuracy, diligence, versatility
what are the application areas of the computer ? list them.
Answer:
Home. Computers are used at homes for several purposes like online bill payment, watching movies or shows at home, home tutoring, social media access, playing games, internet access, etc. ...
Medical Field.
Entertainment.
Industry.
Education.
Government.
Banking.
Business.
Use the Internet to research external storage devices. Find at least three devices, with a minimum storage size of 1 terabyte (TB), from three different manufacturers. Write a paragraph, IN YOUR WORDS, for each device explaining the features and benefits. Provide the retail cost and include a reference link to each device. Next, write
Hi, you've asked an incomplete question. However, I provided suggestions on getting the desired information.
Explanation:
Considering the fact that you are required to find information about not just the cost, but also the features and benefits of three storage devices having a minimum storage size of 1 terabyte, it is recommended that you check this on a reputable e-commerce site (eg Amazon).
There you could find information about their features and benefits, as well as customer feedback about their experience using these devices.
When in global configuration mode, which steps are necessary to edit an ip address on an Ethernet interface?
Answer:
I. You should enter interface configuration mode.
II. Configure the IP address and subnet mask.
Explanation:
A node refers to the physical device that make up a network and are capable of sending, receiving, creating and storing data in communication.
Some examples of network nodes are modem, hubs, computer, switches, phone and printers.
In Computer networking, network devices such as routers and switches are usually configured (programmed) through the use of specific network commands commonly referred to as configs e.g show int description, config terminal (config t), show IP address, etc.
In Cisco devices, there are five (5) main types of command modes;
1. Sub-interface configuration mode.
2. Interface configuration mode.
3. Line configuration mode.
4. Router configuration method.
5. Global configuration mode.
Global configuration mode is a configuration mode that avail network engineers and end users with the ability to modify or edit the running (global) system configuration of a networking device. Thus, any change effected at the global configuration mode will affect the network device as a whole.
In global configuration mode, the steps which are necessary to edit an ip address on an Ethernet interface include;
I. You should enter interface configuration mode using the "configure terminal" command.
II. Configure the IP address and subnet mask.
See an example below;
"Router(config-if)# IP address 192.168.1.2 255.255.255.0"
Fictional Corp has a DNS server running within its VPC. It has decided to move one of the application servers to a different VPC. Which of the following is a step that the cloud administrator needs to perform as part of the move?
a. Migrate to an external DNS solution
b. Create a new VPC that will serve DNS needs for multiple other VPCs
c. Discontinue using DNS
d. Remove the DNS entries within the VPC that are no longer relevant
Answer:
Here the correct option is option b Create a new VPC that will serve DNS needs for multiple other VPCs.
Explanation:
Fictional Corp has a DNS server running within its VPC. It has decided to move one of the application servers to a different VPC. It's not possible to maneuver an existing instance to a different subnet or VPC. Instead, you'll manually migrate the instance by creating a new VPC Image from the source instance.
b. Create a new VPC that will serve DNS needs for multiple other VPCs
The advantages of cloud computing are demonstrated in the fact that software and hardware upgrades are minimized. Another advantage important to IT professionals and just about anyone that accesses data on computers is Multiple Choice the automatic backup of data. the need for fewer tech employees. better group decision making. less of a need to share data among many sources.
Answer: the automatic backup of data
Explanation:
Cloud computing simply refers to the delivery of computing services such as databases, servers, networking, storage, etc over the Internet that is, the cloud.
Advantages of closing d computing include faster innovation, minimal software and hardware upgrades, economies of scale, backup of data, better security, and the greater ability for data to be shared with others in the organization.
What is the full form of USB ?
Answer:
universal serial bus: an external serial bus interface standard for connecting peripheral devices to a computer, as in a USB port or USB cable.
Explanation:
major characteristics of the bus in computer architecture
Answer:
A bus is characterized by the amount of information that can be transmitted at once. This amount, expressed in bits, corresponds to the number of physical lines over which data is sent simultaneously. A 32-wire ribbon cable can transmit 32 bits in parallel.
In computer architecture, a bus (related to the Latin “omnibus”, meaning “for all”) is a communication system that transfers data between components inside a computer, or between computers. This expression covers all related hardware components (wire, optical fiber, etc.)
Explanation:
User-Defined Functions: Miles to track lapsOne lap around a standard high-school running track is exactly 0.25 miles. Define a function named MilesToLaps that takes a float as a parameter, representing the number of miles, and returns a float that represents the number of laps.Then, write a main program that takes a number of miles as an input, calls function MilesToLaps() to calculate the number of laps, and outputs the number of laps. Ex: If the inout is 1.5the output is 6.0 Ex: If the input is 2.2the output is 8.8 Your program should define and call a function Function Miles ToLaps(float userMiles) returns float userLaps 12 // Deine Milestola hert. 34 // Deine Minhert. Your code ust call llestola 5
Answer:
Explanation:
The following is written in Java. The MilesToLaps method creates a variable called laps and gives it the value of the input parameter miles divided by 0.25. Then it returns the variable laps to the user. In the main method a Scanner object was created and asks the user for the number of miles which are passed to the MilesToLaps method which returns the number of laps. This can be seen in the attached image below.
import java.util.Scanner;
class Brainly {
public static void main(String[] args) {
Scanner in = new Scanner(System.in);
System.out.println("How many miles?");
float miles = in.nextFloat();
System.out.println("This is " + MilesToLaps(miles) + " laps");
}
public static float MilesToLaps(float miles) {
float laps = (float) (miles / 0.25);
return laps;
}
}
Select the correct statement(s) regarding PONS. a. only MMF cables can be used, since MMF enables greater data capacities compared to SMF b. PONS systems require active amplifiers, since high frequency signals attenuate quickly over distance c. PONS systems use passive devices between OLT and ONT d. all are correct statements
Answer:
The correct statement regarding PONS is:
c. PONS systems use passive devices between OLT and ONT
Explanation:
PON means Passive Optical Network. Based on fiber-optic telecommunications technology, PON is used to deliver broadband network access to individual end-customers. It enables a single fiber from a service provider to maintain an efficient broadband connection for multiple end-users (homes and small businesses). OLT means Optical Line Terminal, while ONT means Optical Network Terminal. They provide access to the PON.
Kareem is working on a project for his manager. He has a few questions for a co-worker who he knows is knowledgeable on the subject. As they're discussing some of the topics, he gives the co-worker permissions to the resources so they can look at the information on their own. Which of the following access control methods does Kareem's company use?
a. DAC
b. RBAC
c. MAC
d. TSAC
Answer: RBAC
Explanation:
The access control methods that Kareem's company uses us the role based access control.
The Role-based access control (RBAC) simply means assigning permissions to users based on the role that such individual plays within an organization.
RBAC is a simple approach to access management and is typically less prone to error than in a scenario whereby permissions are assigned to users individually. Access rights are given to the workers based on what their job entails and what is needed and other information which isn't needed won't be accessible to them.
It's currently 1:00 in the afternoon. You want to schedule the myapp program to run automatically tomorrow at noon (12:00). What two at commands could you use
Answer:
at 12 pm tomorrow
at now +23 hours
Explanation:
The at command could be used in the command line to perform a scheduled command in Unix related systems. The at command coule be ua d to program a complex script or used to perform simple scheduled reminders.
The at command is initiated by first writing the at string followed by the condition or statement to be performed.
Currently (1:00 pm) ; To make a schedule for 12pm then that will be at noon the following day:
at 12:00 pm tomorrow
Or :
Using the number of hours between the current tone and the schedule time : 12 pm tomorrow - 1:00 pm today is a difference of 23 hours ;
Hence, it can be written as :
at +23 hours
What is garbage in garbage out?
Answer: it means if you give a bad input it will result in a ad output.
Explanation:
It has n acronym GIGO which refers to how the quality of an output is determined by the quality of input.
Garbage is trash info... or input. And grabage out is the trash output.
Select the correct answer.
What testing approach does a development team use when testing the developed code rather than just the functionality of the code?
A.
white box testing
B.
black box testing
C.
acceptance testing
D.
usability testing
Answer:
D. usability testing
Explanation:
A software can be defined as a set of executable instructions (codes) or collection of data that is used typically to instruct a computer how to perform a specific task and to solve a particular problem.
A software development life cycle (SDLC) can be defined as a strategic process or methodology that defines the key steps or stages for creating and implementing high quality software applications. There are seven (7) main stages in the creation of a software and these are;
1. Planning.
2. Analysis and requirements.
3. Software design and prototyping.
4. Development (coding).
5. Integration and testing
6. Deployment.
7. Operations and maintenance.
Usability testing is a testing technique used by a software development team to test a developed code rather than just the functionality of the code.
The main purpose of usability (user experience) testing is to determine how easy, user-friendly or difficult it is for end users (real people) to use a software application or program.
Scenario You are a network engineer and it is your first day working with ASU and you have been given the job of creating a network for the IT program. You are given the following three tasks to complete. 1. Configure IP addressing settings on network devices. 2. Perform basic device configuration tasks on a router. 3. Verify Layer 3 connectivity via a routing protocol. 4. Setup some access control lists.
What are some of the advantages and disadvantages of connection-oriented WAN/Man as opposed to connection-less?
Answer and Explanation:
Connection oriented WAN/MAN as opposed to connection less network is a type of wide area network that requires communicating entities in the network to establish a dedicated connection for their communication before they start communicating. This type of network will use these established network layers only till they release it, typical of telephone networks.
Advantages include:
Connection is reliable and long.
Eliminates duplicate data issues.
Disadvantages include:
Resource allocation while establishing dedicated connection slows down speed and may not fully utilize network resources.
There are no plan B's for network congestion issues, albeit occurring rarely with this type of network.
what is example of application of machine learning that can be imposed in eduction. (except brainly.)
Answer:
Machine Learning Examples
Recommendation Engines (Netflix)
Sorting, tagging and categorizing photos (Yelp)
Self-Driving Cars (Waymo)
Education (Duolingo)
Customer Lifetime Value (Asos)
Patient Sickness Predictions (KenSci)
Determining Credit Worthiness (Deserve)
Targeted Emails (Optimail)
