93 cm3 liquid has a mass of 77 g. When calculating its density what is the appropriate number of significant figures

Answer:

a) Δp = -2.0 kgm / s,  b)   Δp = -4 kg m / s

Explanation:

In this exercise the change in moment of a ball is asked in two different cases

a) clay ball, in this case the ball sticks to the door and we have an inelastic collision where the final velocity of the ball is zero

         Δp = p_f - p₀

         Δp = 0 - m v₀

         Δp = - 0.100 20

         Δp = -2.0 kgm / s

b) in this case we have a bouncing ball, this is an elastic collision, as the gate is fixed it can be considered an object of infinite mass, therefore the final speed of the ball has the same modulus of the initial velocity, but address would count

         v_f = - v₀

        Δp = p_f -p₀

        Δp = m v_f - m v₀

        Δp = m (v_f -v₀)

        Δp = 0.100 (-20 - 20)

        Δp = -4 kg m / s

Answer:

The angular acceleration is 4.5 rad/s^2.

Explanation:

Acceleration, a = 26.5 m/s2

length, L = 5.89 m

The angular acceleration is

[tex]\alpha =\frac{a}{L}\\\\\alpha = \frac{26.5}{5.89}=4.5 rad/s^2[/tex]

Answer:

Radio waves are used to carry satellite signals. These waves travel at 300,000 km/s (the speed of light). This means that a signal sent to a satellite 38,000 km away takes 0.13 s to reach the satellite and another 0.13 s for the return signal to be received back on Earth.

Explanation:

hope it help

Answer:

Distance between them after 5 hours is 300 km.

Explanation:

From point A a vehicle leaves at 80 km / h at the same time a cyclist leaves at 20 km / h at what distance is they from each other after 5 hours.

Distance traveled by A in 5 hours = speed x time = 80 x 5 = 400 km

Distance traveled by B in 5 hours = speed x time = 20 x 5 = 100 km

The distance between them after 5 hours =  400 - 100 = 300 km

Answer:

1.5

x 1.0

1.50

x 0.5

075.00

answer: 75.00m

Explanation:

I hope this help

Answer:

The car travels the distance of 225m before coming to rest.

Explanation:

v = 45m/s

t = 5s

Therefore,

d = v*t

= 45*5

= 225m

Answer:

F/2

Explanation:

In the first case, the two charges are Q1 and Q2 and the distance between them is r. K is the Coulomb's constant

Hence;

F= KQ1Q2/r^2 ------(1)

Where the charge on Q1 is doubled and the distance separating the charges is also doubled;

F= K2Q1 Q2/(2r)^2

F2= 2KQ1Q2/4r^2 ----(2)

F2= F/2

Comparing (1) and (2)

The magnitude of force acting on each of the two particles is;

F= F/2

Answer:

[tex]f=1.98\times 10^7\ Hz[/tex]

Explanation:

Given that,

The radius of circle, r = 0.53 m

The magnitude of the magnetic field, B = 1.3 T

We need to find the oscillator frequency. It is given by :

[tex]f=\dfrac{qB}{2\pi m}[/tex]

Put all the values,

[tex]f=\dfrac{1.6\times 10^{-19}\times 1.3}{2\pi \times 1.67\times 10^{-27}}\\\\f=1.98\times 10^7\ Hz[/tex]

So, the oscillator frequency is [tex]1.98\times 10^7\ Hz[/tex].

Answer:

B

Explanation:

The radiant energy form the sun is absorbed by the black shirt and is converted to heat energy.

Answer:

B Black shirts feel hotter than light-colored shirts on a sunny day.

Explanation:

The energy from the sun also called solar energy is an energy source which reaches the earth as a form of radiant energy, that is it is transmitted without the movement of mass. Solar cells absorbs radiant energy from the sun into electrical energy for powering electrical devices.

During photosynthesis, sunlight absorbed by the chlorophyll of green plants is converted into chemical energy.

In black body, radiant energy abosrde are stored and converted to heat energy, reason dark colored clothes feels hotter than light colored on sunny days.

Energy = (power) x (time)

Energy = (0.69 W) x (0.36 sec)

Energy = 0.25 Joule

Answer:

True

Explanation:

With the gravitational pull that our planets have, we are able to remain in orbit. This demonstrates how every object in the galaxy is attracted to every other object. Every object in the universe that has mass exerts a gravitational pull on every other mass. We as humans do it too, but since our force isn't strong, we don't have much of an effect. I hope this helped and please don't hesitate to reach out with more questions!

Answer:

13.94 rpm

Explanation:

Given that,

The diameter of the pulley, d = 14 foot

Radius, r = 7 foot

The linear velocity of the pulley, v = 14 mph = 20.53 ft/s

We need to find the angular velocity in rpm.

We know that, the relation between the linear velocity and the angular velocity is as follows :

[tex]v=r\omega\\\\\omega=\dfrac{v}{r}\\\\\omega=\dfrac{20.53}{14}\\\\\omega=1.46\ rad/s[/tex]

or

[tex]\omega=13.94\ rpm[/tex]

So, the angular velocity of the pulley is 13.94 rpm.

Answer:

a

Explanation:

Answer:

the answer is c

'

Explanation:

Answer:

AM broadcasts occur on North American airwaves in the medium wave frequency range of 525 to 1705 kHz (known as the “standard broadcast band”). The band was expanded in the 1990s by adding nine channels from 1605 to 1705 kHz.

Answer: hi your question is incomplete attached below is the complete question

1) attached below

2) a)  31 Ω,   302.9 Ω

   b)  17.3 Ω ,  26.4 Ω

Explanation:

1) Deriving Eqn 5-6 from Eqn 5-5

attached below

2) using τ’s calculated and measured resistance

use given data

Tm1 = Rm1 * Cm1

       = 329.3 * 333 * 10^-9 = 109.65 μs

Tm2 = Rm2 * Cm2

       = 329.3 * 200 * 10^-9 = 658.6 μs

a) Capacitance of capacitors

For Cm1

   t₁₂ = 72 μs = R₁' Cm1 log²

 ∴ R₁' = ( 72 * 10^-6 ) / ( 333 * 10^-9 log² )

         = 31 Ω

For Cm2

 t₁₂ = 40 μs  , ∴  R₂' = 302.9 Ω

b) comparing calculated and measured values via percent error

errors

Rm1 - R₁' = 17.3 Ω

Rm2 - R₂' = 26.4 Ω

Answer:

Scattering is an interaction that can happen when a given particle or wave, like an electron, impacts a target or material. Then the electron changes it's original path and leaves some energy in the process. (This is a really simplified explanation of scattering, this is a really complex phenomenon, but let's not dive into that path)

Particularly, Davisson and Germer used a beam of electrons against a target of nickel, and these scattered electrons were detected by a detector. All of that in a vacuum chamber.

Then the correct answer is a nickel target.

"After de Broglie proposed the wave nature of matter, Davisson and Germer demonstrated the wavelike behavior of electrons by observing an interference pattern from electrons scattering off a nickel target"

Answer:

The mount saved is $ 0.105.

Explanation:

Concerned about the increase in the electricity bill, a person decides to save by reducing bathing time from 20 to 15 minutes. Your shower has the following specifications: 4200 W and 220V. Knowing that the kWh costs R$0.30, the savings made in 10 days were approximately​.

The electrical energy is given by

E = P x t

where, P is the electrical power and t is the time.

When he is using the shower for 20 minutes, the energy consumed is

E = 4200 x 20 x 60 = 5040,000 J = 1.4 kWh

When he is using the shower for 15 minutes, the energy consumed is

E' = 4200 x 15 x 60 = 3780000 J = 1.05 kWh

The difference in energy is

E'' = E - E' = 1.4 - 1.05 = 0.35 kWh

The money saved is

= 4 0.3 x 0.35 = $ 0.105

Answer:

Option C.

Explanation:

Suppose that we have light polarized in some given direction with an intensity I0, and it passes through a polarizer that has an angle θ with respect to the polarization of the light, the intensity that comes out of the polarizer will be:

I(θ) = I0*cos^2(θ)

Ok, we know that the light is polarized horizontally and comes with an intensity I0

The first polarizer axis is horizontal, then the intensity after this polarizer is:

then θ = 0°

I(0°) = I0*cos^2(0°) = I0

The intensity does not change. The axis of polarization does not change.

The second polarizer is oriented at 20° from the horizontal, then the intensity that comes out of this polarizer is:

I(20°) =  I0*cos^2(20°) = I0*0.88

And the axis of polarization of the light that comes out is now 20° from the horizontal

Now the light passes through the last polarizer, which has an axis oriented horizontally, so the final intensity of the light will be:

note that here the initial polarization is  I0*0.88

and the angle between the axis is 20° again.

Then the final intensity is:

I(20°) =  I0*0.88*cos^2(20°) = I0*0.78

Then the correct option is C.

Answer:

[tex]6.63\times 10^8\ N/C[/tex]

Explanation:

Given that,

The magnitude of magnetic field, B = 2.21

We need to find the magnitude of the electric field. Let it is E. So,

[tex]\dfrac{E}{B}=c\\\\E=Bc[/tex]

Put all the values,

[tex]E=2.21\times 3\times 10^8\\\\=6.63\times 10^8\ N/C[/tex]

So, the magnitude of the electric field is equal to [tex]6.63\times 10^8\ N/C[/tex].

a. 4000

This has 4-digits.

Answer:

in my opinion letter d.

Explanation:

Sana pi tama

Answer:Diagram A

Explanation:

Since the air resistance is to be neglected, only the gravitational force acts on the ball ( and has acted all the way from the throw upward). Diagram A reflects this fact correctly indicating the gravity acting on the ball downward.

Answer:

Explanation:

Moment of inertia of solid sphere = 2/5 m R²

m is mass and R is radius of sphere.

Putting the values

Moment of inertia of solid sphere I₁

Moment of inertia of hollow  sphere I₂

Kinetic energy of solid sphere ( both linear and rotational )

= 1/2 ( m v² + I₁ ω²)                [ ω is angular velocity of rotation ]

= 1/2 ( m v² + 2/5 m R² ω²)

= 1/2 ( m v² + 2/5 m v²)

=1/2 x 7 / 5 m v²

= 0.7 x 5 x 4² = 56 J .

This will be equal to work to be done to stop it.

Kinetic energy of hollow sphere ( both linear and rotational )

= 1/2 ( m v² + I₂ ω²)  [ ω is angular velocity of rotation ]

= 1/2 ( m v² + 2/3 m R² ω²)

= 1/2 ( m v² + 2/3 m v²)

=1/2 x 5 / 3 m v²

= 0.833 x 5 x 4² = 66.64 J .

This will be equal to work to be done to stop it.

Answer:

[tex]M.E=41J[/tex]

Explanation:

From the question we are told that:

Amplitude [tex]a=4.20cm[/tex]

Spring Constant [tex]K=262N/m[/tex]

Mass [tex]m=560g[/tex]

Generally the equation for mechanical energy is mathematically given by

[tex]M.E=\frac{1}{2}km^2[/tex]

[tex]M.E=0.5*262*0.56^2[/tex]

[tex]M.E=41J[/tex]

Answer:

Following are the solution to the given question:

Explanation:

Please find the complete question in the attached file.

The cost after 30 days is 60 dollars. As energy remains constant, the cost per hour over 30 days will be decreased.

[tex]\to \frac{\$60}{\frac{30 \ days}{24\ hours}} = \$0.08 / kwh.[/tex]

Thus, [tex]\frac{\$0.08}{\$0.12} = 0.694 \ kW \times 0.694 \ kW \times 1000 = 694 \ W.[/tex]

The electricity used is continuously 694W over 30 days.

If just resistor loads (no reagents) were assumed,

[tex]\to I = \frac{P}{V}= \frac{694\ W}{120\ V} = 5.78\ A[/tex]

Energy usage reduction percentage = [tex](\frac{60\ W}{694\ W} \times 100\%)[/tex]

This bulb accounts for [tex]8.64\%[/tex] of the energy used, hence it saves when you switch it off.

Answer:

Liquid volume is usually measured using either a graduated cylinder or a buret. As the name implies, a graduated cylinder is a cylindrical glass or plastic tube sealed at one end, with a calibrated scale etched (or marked) on the outside wall.

Answer:

[tex]\frac{a_{c1}}{a_{c2}} = 2.23[/tex]

Explanation:

The centripetal acceleration is given as follows:

[tex]a_c = \frac{v^2}{r}\\[/tex]

where,

ac = centripetal acceleration

v = linear speed = rω

r = radius

ω = angular speed

Therefore,

[tex]a_c = \frac{(r\omega)^2}{r}\\\\a_c = r\omega^2[/tex]

Therefore, the ratio will be:

[tex]\frac{a_{c1}}{a_{c2}} = \frac{r_1\omega^2}{r_2\omega^2}\\\\\frac{a_{c1}}{a_{c2}} = \frac{r_1}{r_2}\\\\[/tex]

where,

r₁ = 6.7 m

r₂ = 3 m

Therefore,

[tex]\frac{a_{c1}}{a_{c2}} = \frac{6.7\ m}{3\ m}\\\\[/tex]

[tex]\frac{a_{c1}}{a_{c2}} = 2.23[/tex]

Answer:

the unit for ΔL/L is "unitless".

Explanation:

Given;

ΔL/L

by physics convection, the above parameters can be defined as;

delta L (ΔL) is change in length, with SI unit as meters (m),

L is the original length of the material, with SI unit as meters (m)

The ratio of the change in length to the original length has no unit since both units cancel out during the division.

[tex]\frac{\Delta L }{L } = \frac{(m)}{(m)} = \ unitless[/tex]

This ratio (ΔL/L), is also called tensile strain and it has no unit.

Therefore, the unit for ΔL/L is "unitless".

Answer:

Henry Ford

Explanation:

he built the first ford

Answer:

   a = w² r

Explanation:

In this exercise, indicate that the wheel has angular velocity w, the worm experiences the same angular velocity if it does not move, and has an acceleration towards the center of the circle, according to Newton's second law, called the centripetal acceleration.

           a = v² / r

angular and linear variables are related

           v = w r

we substitute

          a = w² r

where r is the radius of the wheel