Answer:
Krypton -73
Explanation:
There are 33 known isotopes of krypton (36Kr) with atomic mass numbers from 69 through 101.
Good luck!
Answer:
D. Krypton-73
Explanation:
An isotope of an element has the same atomic number and the same number of protons but a different number of neutrons and a different atomic weight. Krypton is the 36th element on the periodic table. It has 36 protons and 48 neutrons. Krypton-73 is one of 33 known isotopes of Krypton and is the only one that actually exists from the list of choices.
Hope that helps.
A sample of ice absorbs 15.6kJ of heat as it undergoes a reversible phase transition to form liquid water at 0∘C. What is the entropy change for this process in units of JK? Report your answer to three significant figures. Use −273.15∘C for absolute zero.
Answer:
Entropy change of ice changing to water at 0°C is equal to 57.1 J/K
Explanation:
When a substance undergoes a phase change, it occurs at constant temperature.
The entropy change Δs, is given by the formula below;
Δs = q/T
where q is the quantity of heat absorbed or evolved in Joules and T is temperature in Kelvin at which the phase change occur
From the given data, T = 0°C = 273.15 K, q = 15.6 KJ = 15600 J
Δs = 15600 J / 273.15 K
Δs = 57.111 J/K
Therefore, entropy change of ice changing to water at 0°C is equal to 57.1 J/K
The entropy change of ice changing to water will be "57.1 J/K".
Entropy changeThe shift in what seems like a thermodynamic system's condition of confusion is caused by the transformation of heat as well as enthalpy towards activity. Entropy seems to be greater mostly in a network with a high quantity or measure of chaos.
According to the question,
Temperature, T = 0°C or,
= 273.15 K
Heat, q = 15.6 KJ or,
= 15600 J
We know the formula,
Entropy change, Δs = [tex]\frac{q}{T}[/tex]
By substituting the values, we get
= [tex]\frac{15600}{273.15}[/tex]
= 57.11 J/K
Thus the above answer is correct.
Find out more information about Entropy change here:
https://brainly.com/question/6364271
Rectangular cube 3.2 m length 1.2 m in height and 5 m in length is split into two parts. The container has a movable airtight divider that divides its length as necessary. Part A has 58 moles of gas and part B has 165 moles of a gas.
Required:
At what length will the divider to equilibrium?
Answer:
The length the divider is to equilibrium from Part A = 1.30 m and from Part B = 3.70 m
Explanation:
Given that:
A rectangular cube with 3.2 m breadth, 1.2 m height and 5 m in length is splitted into two parts.
The diagrammatic expression for the above statement can be found in the attached diagram below.
The container has a movable airtight divider that divides its length as necessary.
Part A has 58 moles of gas
Part B has 165 moles of a gas.
Thus, the movable airtight divider will stop at a length where the pressure on it is equal on both sides.
i.e
[tex]\mathtt{P = P_A = P_B}[/tex]
Using the ideal gas equation,
PV = nRT
where, P,R,and T are constant.
Then :
[tex]\mathsf{\dfrac{V_A}{n_A}= \dfrac{V_B}{n_B}}[/tex]
[tex]\mathsf{\dfrac{L_A \times B \times H}{n_A}= \dfrac{L_B \times B \times H}{n_B}}[/tex] --- (1)
since Volume of a cube = L × B × H
From the question; the L = 5m
i,e
[tex]\mathsf{L_A +L_B}[/tex] = 5
[tex]\mathsf{L_A = 5 - L_B}[/tex]
From equation (1) , we divide both sides by (B × H)
Then :
[tex]\mathsf{\dfrac{L_A }{n_A}= \dfrac{L_B }{n_B}}[/tex]
[tex]\mathsf{\dfrac{5-L_B}{58}= \dfrac{L_B }{165}}[/tex]
By cross multiplying; we have:
165 ( 5 - [tex]\mathsf{L_B}[/tex] ) = 58 (
825 - 165[tex]\mathsf{L_B}[/tex] = 58
825 = 165[tex]\mathsf{L_B}[/tex] +58
825 = 223[tex]\mathsf{L_B}[/tex]
[tex]\mathsf{L_B}[/tex] = 825/223
[tex]\mathsf{L_B}[/tex] = 3.70 m
[tex]\mathsf{L_A = 5 - L_B}[/tex]
[tex]\mathsf{L_A = 5 - 3.70}[/tex]
[tex]\mathsf{ L_A}[/tex] = 1.30 m
The length the divider is to equilibrium from Part A = 1.30 m and from Part B = 3.70 m
In a reversible reaction, the endothermic reaction absorbs ____________ the exothermic reaction releases. A. less energy than B. None of these, endothermic reactions release energy C. the same amount of energy as D. more energy than
Answer: C. the same amount of energy as
Explanation:
A reversible reaction is a chemical reaction where the reactants form products that, in turn, react together to give the reactants back.
Reversible reactions will reach an equilibrium point where the concentrations of the reactants and products will no longer change.
[tex]A+B\rightleftharpoons C+D[/tex]
Thus if forward reaction is exothermic i.e. the heat is released , the backward reaction will be endothermic i.e. the heat is absorbed and in same amount.
The amount of energy released will be equal and opposite in sign to the energy absorbed in that reaction.
Answer:
C.) the same amount of energy as
Explanation:
I got it correct on founders edtell
Enter the balanced chemical equation for the reaction of each of the following carboxylic acids with KOH.Part Aacetic acidExpress your answer as a chemical equation. Assume that there is no dissociation (i.e., enter only whole compounds, not ions).Part B2-methylbutanoic acid (CH3CH2CH(CH3)COOH)Express your answer as a chemical equation. Assume that there is no dissociation (i.e., enter only whole compounds, not ions).Part C4-chlorobenzoic acid (ClC6H4COOH)Express your answer as a chemical equation. Assume that there is no dissociation (i.e., enter only whole compounds, not ions).
Answer:
Explanation:
Answer in attached file .
what are the monomers of bakelite
Answer:
Bakelite is a polymer made up of the monomers phenol and formaldehyde. This phenol-formaldehyde resin is a thermosetting polymer.
Answer: The monomers of bakelite are formaldehyde and phenol
Explanation:
Which of the following is most likely a heavier stable nucleus? (select all that apply) Select all that apply: A nucleus with a neutron:proton ratio of 1.05
The question is incomplete, the complete question is;
Which of the following is most likely a heavier stable nucleus? (select all that apply) Select all that apply: A nucleus with a neutron:proton ratio of 1.05 A nucleus with a A nucleus with a neutron:proton ratio of 1.49 The nucleus of Sb-123 A nucleus with a mass of 187 and an atomic number of 75
Answer:
A nucleus with a A nucleus with a neutron:proton ratio of 1.49
A nucleus with a mass of 187 and an atomic number of 75
Explanation:
The stability of a nucleus depends on the number of neutrons and protons present in the nucleus. For many low atomic number elements, the number of protons and number of neutrons are equal. This implies that the neutron/proton ratio = 1
Elements with higher atomic number tend to be more stable if they have a slight excess of neutrons as this reduces the repulsion between protons.
Generally, the belt of stability for chemical elements lie between and N/P ratio of 1 to an N/P ratio of 1.5.
Two options selected have an N/P ratio of 1.49 hence they are heavy stable elements.
Answer:
-A nucleus with a neutron:proton ratio of 1.49
-The nucleus of Sb-123
-A nucleus with a mass of 187 and an atomic number of 75
The tosylate of (2R,3S)-3-phenylbutan-2-ol undergoes an E2 elimination on treatment with sodium ethoxide. Draw the structure of the alkene that is produced.
Answer:
(R)-but-3-en-2-ylbenzene
Explanation:
In this reaction, we have a very strong base (sodium ethoxide). This base, will remove a hydrogen producing a double bond. We know that the reaction occurs through an E2 mechanism, therefore, the hydrogen that is removed must have an angle of 180º with respect to the leaving group (the "OH"). This is known as the anti-periplanar configuration.
The hydrogen that has this configuration is the one that placed with the dashed bond (red hydrogen). In such a way, that the base will remove this hydrogen, the "OH" will leave the molecule and a double bond will be formed between the methyl and the carbon that was previously attached to the "OH", producing the molecule (R) -but-3- en-2-ylbenzene.
See figure 1
I hope it helps!
An HCl solution has a concentration of 0.09714 M. Then 10.00 mL of this solution was then diluted to 250.00 mL in a volumetric flask. The diluted solution was then used to titrate 250.0 mL of a saturated AgOH solution using methyl orange indicator to reach the endpoint.
Required:
a. What is the concentration of the diluted HCI solution?
b. If 7.93 mL of the diluted HCI solution was required to reach the endpoint, what is the concentration of OH- in solution?
c. What is the concentration of Ag+ in solution?
d. What is the Ksp expression for the dissolution of AgOH?
Answer:
a. 3.8856x10⁻³M HCl
b. 1.23x10⁻⁴M OH⁻
c. 1.23x10⁻⁴M Ag⁺
d. Ksp = [Ag⁺] [OH⁻]
Explanation:
a. The reaction that you are studying is:
HCl(aq) + AgOH(aq) → H₂O(l) + AgCl(s)
The HCl solution is diluted from 10.00mL to 250.00mL, that is:
250.00mL / 10.00mL = 25 -The solution is diluted 25 times-
As original concentration of HCl is 0.09714M, the concentration of the diluted solution is:
0.09714M / 25 =
3.8856x10⁻³M HClb. 1 mole of HCl reacts per mole of AgOH, moles of HCl that reacts are:
7.93mL = 7.93x10⁻³L × (3.8856x10⁻³mol HCl / L) = 3.0813x10⁻⁵ moles of HCl.
Based on the reaction, you have in solution
3.0813x10⁻⁵ moles of AgOH = Ag⁺ = OH⁻
The AgOH solution was 250.0mL = 0.2500L, its concentration is:
3.0813x10⁻⁵ moles OH⁻ / 0.2500L =
1.23x10⁻⁴M OH⁻c. In solution, AgOH produce Ag⁺ and OH⁻ in equals proportions, that means:
1.23x10⁻⁴M OH⁻ =
1.23x10⁻⁴M Ag⁺d. The solubility product reaction of AgOH(s) is:
AgOH(s) ⇄ Ag⁺(aq) + OH⁻(aq)
Where Ksp for this reaction is defined as:
Ksp = [Ag⁺] [OH⁻]
How has the work of chemists affected the environment over the years?
Answer:
Chemistry is one of the causes for global warming, and in some cases it can even cause certain illnesses.
Answer:
Chemists have both hurt the environment and helped the environment by their actions.
Explanation:
<3
When methane is burned with oxygen, the products are carbon dioxide and water. If you produce 9 grams of water and 11 grams of carbon dioxide from 16 grams of oxygen, how many
The given question is incomplete.
The complete question is:
When methane is burned with oxygen, the products are carbon dioxide and water. If you produce 9 grams of water and 11 grams of carbon dioxide from 16 grams of oxygen, how many grams of methane were needed for the reaction?
Answer: 4 grams of methane were needed for the reaction
Explanation:
According to the law of conservation of mass, mass can neither be created nor be destroyed. Thus the mass of products has to be equal to the mass of reactants. The number of atoms of each element has to be same on reactant and product side. Thus chemical equations are balanced.
{tex]CH_4+2O_2\rightarrow CO_2+H_2O[/tex]
Given: mass of oxygen = 16 g
Mass of carbon dioxide = 11 g
Mass of water = 9 g
Mass of products = Mass of carbon dioxide + mass of water = 11 g +9 g = 20 g
Mass or reactant = mass of methane + mass of oxygen = mass of methane + 16 g
As mass of reactants = mass of products
mass of methane + 16 g= 20 g
mass of methane = 4 g
Thus 4 grams of methane were needed for the reaction
What is the result in the double displacement reaction of hydrochloric acid and
lithium carbonate?
Answer:
Lithium chloride (LiCl), carbon dioxide, and water
Explanation:
Li₂CO₃ + HCl ⇒ LiCl + CO₂ + H₂O
When lithium carbonate reacts with hydrochloric acid, lithium chloride, water, and bubbles of carbon dioxide gas are given off. This is the result of a double displacement reaction followed by a decomposition reaction.
Hope that helps.
A 50.0 L cylinder of oxygen gas is stored at 150. atm. What volume would the oxygen gas occupy if the cylinder were opened into a hot air balloon (completely deflated) until the final pressure is 735 torr
Answer:
THE VOLUME OF THE OXYGEN GAS AFTER DEFLATION TILL A PRESSURE OF 735 TORR IS ATTAINED IS 7836.99 L
Explanation:
Using Boyle's law,
P1V1 = P2V2
P1 = 150 atm
V1 = 50 L
P2 = 735 Torr
V2 = unknown
We must first convert the pressures into the same SI unit for easy calculation
1torr = 1/760 atm
So converting 735 torr to atm; we have:
1 torr = 1/ 760 atm
735 torr = 735 * 1 / 760 atm
= 0.967 atm
In other words, P2 = 0.957 atm
So rearranging the formula by making V2 the subject of the equation, we have:
V2 = P1 V1 / P2
V2 = 150 * 50 / 0.957
V2 = 7836.99 L
The volume of the oxygen cylinder after deflation to a final pressure of 735 torr or 0.967 atm pressure is 7836.99 L.
A star is observed from two positions of Earth in its orbit, in summer and winter. Which of these is the best method to calculate the approximate distance of the star from Earth? measure the parallax and use it in calculations measure the red shift of emitted light and use it in calculations use doppler effect to calculate the shift in light traveling from star to Earth in winter use doppler effect to calculate the shift in light traveling from star to Earth in summer
Answer:
measure the parallax and use it in calculations
Explanation:
got it right on test
There are many more stars at different distances from the earth. The distance to the stars calculated in light years and it is measured using parallax method.Thus option a is correct.
What is parallax method?Parallax method is used to measure the approximate distance of stars from earth. It uses the position of nearby star from two points opposite to earth and the small angular displacement observed from the remote stars are noted.
The orbit radius of earth and distance to the stars can be calculated from the parallactic angle p, that is one second of arc. Thus the distance is described in the units parsec.
The distance to the stars are usually calculated in light years. One parsec equals 3.26 light years. The nearest star to earth is named as proxima century having the distance parallax 0.76813'' which equals 4.24 light years. Thus, parallax is inversely proportional to the distance.
To find more on parallax method, refer here:
https://brainly.com/question/13046118
#SPJ2
what volume in liters of carbon monoxide will be required to produce 18.9 L of nitrogen in the reaction below
2co(g) + 2no(g) -> n2(g) + 2co2(g)
Answer:
37.8 L OF CARBON MONOXIDE IS REQUIRED TO PRODUCE 18.9 L OF NITROGEN.
Explanation:
Equation for the reaction:
2 CO + 2 NO ------> N2 + 2 CO2
2 moles of carbon monoxide reacts with 2 moles of NO to form 1 mole of nitrogen
At standard temperature and pressure, 1 mole of a gas contains 22.4 dm3 volume.
So therefore, we can say:
2 * 22.4 L of CO produces 22.4 L of N2
44.8 L of CO produces 22.4 L of N2
Since, 18.9 L of Nitrogen is produced, the volume of CO needed is:
44.8 L of CO = 22.4 L of N
x L = 18.9 L
x L = 18.9 * 44.8 / 22.4
x L = 18.9 * 2
x = 37.8 L
The volume of Carbon monoxide required to produce 18.9 L of N2 is 37.8 L
Answer:
37.8
Explanation:
Assuming 100% dissociation, which of the following compounds is listed incorrectly with its van't Hoff factor i? Al2(SO4)3, i = 4 NH4NO3, i = 2 Mg(NO3)2, i = 3 Na2SO4, i = 3 Sucrose, i = 1
Answer:
- Aluminium sulfate Al2(SO4)3 dissociates in two aluminium ions and three sulfate ions, therefore, van't Hoff factor is 5 (incorrect).
Explanation:
Hello,
In this case, since the van't Hoff factor is related with the species that result from the ionization of a chemical compound, we can see that that
- Aluminium sulfate Al2(SO4)3 dissociates in two aluminium ions and three sulfate ions, therefore, van't Hoff factor is 5 (incorrect).
- Ammonium nitrate NH4NO3 dissociates in one ammonium ions and one nitrate ion, therefore, van't Hoff factor is 2 (correct).
- Sodium sulfate Na2SO4 dissociates in two sodium ions and one sulfate, therefore, van't Hoff factor is 3 (correct).
- Sucrose is not ionized, therefore, van't Hoff factor is 1 (correct).
Best regards.
2NO + 2H2 ⟶N2 + 2H2O What would the rate law be if the mechanism for this reaction were: 2NO + H2 ⟶N2 + H2O2 (slow) H2O2 + H2 ⟶2H2O (fast)
Answer:
rate = [NO]²[H₂]
Explanation:
2NO + H2 ⟶N2 + H2O2 (slow)
H2O2 + H2 ⟶2H2O (fast)
From the question, we are given two equations.
In chemical kinetics; that is the study of rate reactions and changes in concentration. The rate law is obtained from the slowest reaction.
This means that our focus would be on the slow reaction. Generally the rate law is obtained from the concentrations of reactants in a reaction.
This means our rate law is;
rate = [NO]²[H₂]
The last group of elements on the periodic table are called _____. noble gases halogens metals noble solids
Answer:
The answer is noble gases
Explanation:
Here is your explanation The vertical columns are called groups. There are eighteen groups. The last group on the far right is called the noble, or inert gases. Elements in a group have similar chemical properties. For example, elements in the noble gas group are all gases under. This is the thing from the passege bye god bless you
The last group of elements on the periodic table are called "noble gases."
The noble gases are a group of elements located in Group 18 of the periodic table. They are also known as Group 0 or the "inert gases." The noble gases include helium (He), neon (Ne), argon (Ar), krypton (Kr), xenon (Xe), and radon (Rn).
The noble gases are unique because they have a full complement of valence electrons in their outermost energy level. This full electron configuration gives them exceptional stability, making them chemically unreactive or inert under normal conditions. In other words, noble gases are less likely to form chemical bonds with other elements.
Learn more about noble gases from the link given below.
https://brainly.com/question/19024000
#SPJ2
A student carries out the precipitation reaction shown below, starting with 0.030 moles of calcium nitrate. The final mass of the precipitate is 2.9 g. Answer the questions below to determine the percent yield. 3Ca(NO3)2(aq) + 2Na3PO4(aq) → Ca3(PO4)2(s) + 6NaNO3(aq) 1. a. Which product is the precipitate? b. How many moles of the precipitate would one expect to be produced from 0.030 moles of calcium nitrate? c. How many grams of solid do you expect to be produced? d. What is the percent yield?
Answer:
a. Ca₃(PO₄)₂.
b. 0.010 moles of Ca₃(PO₄)₂ can we expect to be produced
c. 3.1g of Ca₃(PO₄)₂
d. Percent yield = 93.5%
Explanation:
a. Based on the reaction:
3Ca(NO₃)₂(aq) + 2Na₃PO₄(aq) → Ca₃(PO₄)₂(s) + 6NaNO₃(aq)
3 moles of calcium nitrate reacts with 2 moles of sodium phosphate producieng 1 mole of calcium phosphate.
As you can see, Ca₃(PO₄)₂ is a solid product -(s)-, that means when the reaction occurs the precipitate produced is the solid,
Ca₃(PO₄)₂b. As 3 moles of calcium nitrate produce 1 mole of calcium phosphate and there are 0.030 moles of calcium nitrate
0.030 moles Ca(NO₃)₂ × (1 mol Ca₃(PO₄)₂ / 3 moles Ca(NO₃)₂) =
0.010 moles of Ca₃(PO₄)₂ can we expect to be producedc. As molar mass of Ca₃(PO₄)₂ is 310.18g/mol, the mass of 0.010 moles (The expected mass) is;
0.010 moles Ca₃(PO₄)₂ × (310.18g / mol) =
3.1g of Ca₃(PO₄)₂d. The percent yield is defined as 100 times the ratio between the obtained yield (That is 2.9g of precipitate, Ca₃(PO₄)₂) and the expected yield, 3.1g of Ca₃(PO₄)₂:
[tex]\frac{2.9g}{3.1g} *100[/tex]
Percent yield = 93.5%(a) The product in solid state would be the precipitate. Hence, the precipitate would be Ca3(PO4)2
(b) From the balanced equation of the reaction: 3 moles of Ca(NO3)2 is required for 1 mole of Ca3(PO4)2
If there are just 0.030 moles of Ca(NO3)2, then"
3 moles = 1
0.030 moles = 1 x 0.030/3
= 0.01 moles of Ca3(PO4)2
In other words, 0.01 moles of the precipitate would be expected to be produced from 0.030 moles of calcium nitrate.
(c) 0.01 moles solid (Ca3(PO4)2) is expected. Mass of Ca3(PO4)2 expected:
mass = mole x molar mass
molar mass of Ca3(PO4)2 = 310.18 g/mol
mass of Ca3(PO4)2 expected to be produced = 0.01 x 310.18
= 3.1018 g
Hence, 3.1018g of solid is expected to be produced.
(d) Percentage yield = actual yield/theoretical yield x 100
= 2.9/3.1018 x 100
= 93.5%
More on precipitation reaction can be found here: https://brainly.com/question/24158764
Pentanone was treated with excess sodium cyanide in HCl (aq) followed by hydrogen gas has over Pd. This produced:________
A. 2-amino-1-hexanol
B. 1-amino-2-methylpentan-2-ol
C. 1-cyano-1-pentanol
D. 2-aminomethylpentan-1-ol
Answer:
B. 1-amino-2-methylpentan-2-ol
Explanation:
In this case, the first step, we have the attack of the nucleophile cyanide ([tex] CN^-[/tex] produced by sodium cyanide to the carbon on the carbonyl group (C=O) producing a negative charge in the oxygen.
Then HCl protonates the molecule to produce a cyanohydrin. This cyanohydrin can be reduced by the action of hydrogen gas ([tex]H_2[/tex]) in the presence of a catalyst ([tex]Pd[/tex]), producing an amino group. With this in mind, the final molecule is: 1-amino-2-methylpentan-2-ol.
See figure 1 to further explanations
I hope it helps!
Determine whether the following statement about reaction rates is true or false. If the statement is false, select the reason why?
Increasing the temperature of a reaction system decreases the activation energy of the reaction.
Answer:
False
Explanation:
Reaction rates is a field under chemical kinetics that deals with the measure of speed of a chemical reaction. It is the change in the concentration of a reactant or product per unit time.
Activation Energy is a theory been put forward to explain why different chemical reactions proceed at different rates.
Activation Energy theory postulates that for a reactant to transform into a product , the colliding particles or molecules of the reactant must possess a certain amount of energy so as to overcome the reaction barrier.
An important factor which may influence the attainment of activation energy by colliding particles of reactants is the temperature at which the reaction is carried out. The higher the temperature, the greater is the fraction of the reactant particles which possess the activation energy and thus the faster the reaction becomes. SO , in essence increasing the temperature of a reaction system do not decreases the activation energy of the reaction but rather also increases the activation energy of the reaction.
a sample of gas occupies a volume of 2.62 liters at 25 C and 1.00 atm. what will be the volume at 50 C and 2 atm
Answer:2.62 L
Explanation:
A sample of gas occupies a volume of 2.62 liters at 25° C and 1.00 atm. and the volume at 50° C and 2 atm then volume is 2.62 liters.
What is ideal gas law ?The equation of state for a fictitious perfect gas is known as the ideal gas law, sometimes known as the generic gas equation. Although it has significant drawbacks, it is a decent approximation of the behavior of many gases under various situations.
An ideal gas is one in which there are no intermolecular attraction forces and all collisions between atoms or molecules are entirely elastic. It may be seen as a group of perfectly hard spheres that collide but do not else interact with one another.
By using ideal gas equation,
P₁ V ₁ ÷ T = P₂V₂ ÷ T
1 × 2.62 ÷ 25 = 2 × V₂ ÷ 50
V₂ = 1 × 2.62 × 50 ÷ 25 × 2
V₂ = 2.62 liters.
Thus, a sample of gas occupies a volume of 2.62 liters at 25° C and 1.00 atm. and the volume at 50° C and 2 atm then volume is 2.62 liters.
To learn more about ideal gas law follow the link below;
https://brainly.com/question/6534096
#SPJ5
What is the energy of a photon of electromagnetic radiation with a wavelength of 963.5 nm? (c = 3.00 × 108 m/s, h = 6.63 × 10–34 J · s
Answer:
[tex]E=2.06\times 10^{-19}\ J[/tex]
Explanation:
Given that,
The wavelength of electromagnetic radiation is 963.5 nm.
We need to find the energy of a photon with this wavelength.
The formula used to find the energy of a photon is given by :
[tex]E=\dfrac{hc}{\lambda}\\\\E=\dfrac{6.63\times 10^{-34}\times 3\times 10^8}{963.5\times 10^{-9}}\\\\E=2.06\times 10^{-19}\ J[/tex]
So, the energy of a photon is [tex]2.06\times 10^{-19}\ J[/tex].
Select True or False: Pi bonds are covalent bonds in which the electron density is concentrated above and below a plane containing the nuclei of the bonding atoms and occurs by sideways overlap of p orbitals.
Answer:
True
Explanation:
In pi bonds, the electron density concentrates itself between the atoms of the compound but are present on either side of the line joining the atoms. Electron density is found above and below the plane of the line joining the internuclear axis of the two atoms involved in the bond.
Pi bonds usually occur by sideways overlap of atomic orbitals and this leads to both double and triple bonds.
Describe the similarities between H3O and NH3. Compare/contrast their shapes and polarities within the context of your answer. These molecules are called isoelectronic. Why
Answer:
Explanation:
[tex]H_3O^+[/tex] also known as hydronium ion is formed as a result of the reaction between an hydrogen proton and a water molecules.
i.e [tex]\mathtt{H^+ + H_2O \to H_3O^+}[/tex]
(molecular geometry for the hydronium ion shows that the lewis structure of hydronium ion possess a three hydrogen ion bonded to a central atom known as oxygen. The oxygen possess a lone pair with a positive ion. So we have three hydrogen atoms and a lone pair attached to the oxygen. We can now say that there are four groups as the steric number in which one of them is a lone pair. This give rise to the trigonal pyramidal shape of the [tex]H_3O^+[/tex] (hydronium ion) with a bond angle of about 109,5°
Similarly, [tex]NH_3[/tex] on the other hand also known as ammonia has a shape that can be also determined by the Lewis structure.
IN ammonia, there are three hydrogen and a lone pairs of electron spreading out as far away from each other from the centre nitrogen. In essence, the valence shell electron pair around hydrogens tend to repel each other. Hence, giving it a trigonal pyramidal shape.
From above the similarities between H3O and NH3 is in their molecular geometry in which both H3O and NH3 have the same shape.
These molecules are called isoelectronic. Why?
Isoelectronic molecules are molecules having the same number of electrons and same electronic configuration structure. As a result H3O and NH3 possess the same number of electrons in the same orbitals and they also posses the same structure.
What subatomic particles surround the nucleus? Question 1 options: protons neutrons atoms electrons
Answer:
Electrons "surround"
Explanation:
Protons and neutrons "make up" the nucleus so they are contained "within" the nucleus meaning that electrons would "surround" the nucleus as they orbit around the nucleus
Answer:
Electrons
Explanation:
Protons and nuetrons are present inside the nucleus of an atom while the electron revolve around the nucleus in different energy levels.
If sulfur gained another electron, would its charge be positive or negative?
Explain your thinking. *
Answer:
AS WE KNOW THAT , when non-metallic elements gain electrons to form anions, SO sulphur is non metal and have the capacity to gain two electrons as lies in 6th group so it can gain electron and become sulphide ion(S-).
Thanks for asking questionExplanation:
Calculate the energy required to heat of 1.50 kg silver from -7.8 C to 15.0 C . Assume the specific heat capacity of silver under these conditions is .0235 J*g^-1*K^-1 . Be sure your answer has the correct number of significant digits.
Answer:
804 J
Explanation:
Step 1: Given data
Mass of silver (m): 1.50 kgInitial temperature: -7.8 °CFinal temperature: 15.0 °CSpecific heat capacity of silver (c): 0.0235J·g⁻¹K⁻¹Step 2: Calculate the energy required (Q)
We will use the following expression.
Q = c × m × ΔT
Q = 0.0235J·g⁻¹K⁻¹ × (1.50 × 10³g) × [15.0°C-(-7.8°C)]
Q = 804 J
The following reaction, catalyzed by iridium, is endothermic at 700 K: CaO(s) + CH4(g) + 2H2O (g) → CaCO3 (s) + 4H2 (g) For the reaction mixture above at equilibrium at 700 K, how would the following changes affect the total quantity of CaCO3 in the reaction mixture once equilibrium is re-established?
a. Increasing the temperature
b. Adding calcium oxide (CaO)
c. Removing methane (CH4)
d. Increasing the total volume
e. Adding iridium
Answer:
A. Increasing the temperature will favor forward reaction and more CaCo3 formed.
B. More CaCo3 will be formed.
C. CaCo3 will decrease and more react ants formed.
D. Less CaCo3 will be formed.
E. Iridium is a catalyst so there is no effect
Explanation:
A. Temperature will increase because it's an endothermic reaction.
B. Adding Cao will favor forward reaction and more CaCo3 formed.
C. Removing methane, more react ants are formed and CaCo3 decreases.
D. Irridi is a catalyst so it has no effect on the CaCo3 but only speeds its rate of reaction.
Chelsi has talked to her artist friends about how much money they earn each year from working in the arts. She gathers these values from seven people: [$1,500; $6,700; $2,200; $8,100; $50,500; $12,000; $2,200].
What is the median of this data set?
Answer:
The median would be 6700
Explanation:
Arrange data values from lowest to highest value
The median is the data value in the middle of the set
.
Ordering a data set x1 ≤ x2 ≤ x3 ≤ ... ≤ xn from lowest to highest value, the median x˜ is the data point separating the upper half of the data values from the lower half.
If the size of the data set n is odd the median is the value at position p where
Formula for the median
p=n+12
x˜=xp
If n is even the median is the average of the values at positions p and p + 1 where
p=n2
x˜=xp+xp+12
If there are 2 data values in the middle the median is the mean of those 2 values.
Which of the following processes have a ΔS < 0? Which of the following processes have a ΔS < 0? carbon dioxide(g) → carbon dioxide(s) water freezes propanol (g, at 555 K) → propanol (g, at 400 K) methyl alcohol condenses All of the above processes have a ΔS < 0.
Answer:
All of the above processes have a ΔS < 0.
Explanation:
ΔS represents change in entropy of a system. Entropy refers to the degree of disorderliness of a system.
The question requests us to identify the process that has a negative change of entropy.
carbon dioxide(g) → carbon dioxide(s)
There is a change in state from gas to solid. Solid particles are more ordered than gas particles so this is a negative change in entropy.
water freezes
There is a change in state from liquid to solid. Solid particles are more ordered than liquid particles so this is a negative change in entropy.
propanol (g, at 555 K) → propanol (g, at 400 K)
Temperature is directly proportional to entropy, this means higher temperature leads t higher entropy.
This reaction highlights a drop in temperature which means a negative change in entropy.
methyl alcohol condenses
Condensation is the change in state from gas to liquid. Liquid particles are more ordered than gas particles so this is a negative change in entropy.
