Answer:
i would check all connections from the hard drive and power supply and check your motherboard for any missing sauters and or loose no contact connections
Explanation:
A computer uses a programmable clock in square-wav e mode. If a 500 MHz crystal is used, what should be the value of the holding register to achieve a clock resolution of (a) a millisecond (a clock tick once every millisecond)
Answer:
500,000
Explanation:
A computer uses a programmable clock in square-wave mode. If a 500 MHz crystal is used, what should be the value of the holding register to achieve a clock resolution of (a) a millisecond (a clock tick once every millisecond)
1 millisecond = 1 million second = 1,000,000
For a 500 MHz crystal, Counter decrement = 2
Therefore value of the holding register to a clock resolution of 1,000,000 seconds :
1,000,000/2 = 500,000
By using ____, you can use reasonable, easy-to-remember names for methods and concentrate on their purpose rather than on memorizing different method names.
Answer:
Polymorphism
Explanation:
If we use polymorphism so we can apply the names that could be easy to remember for the methods' purpose.
The information regarding the polymorphism is as follows:
The person has various attributes at the same timeFor example, a man could be a father, a husband, an entrepreneur at the same time.In this, the similar person has different types of behavior in different situations.Therefore we can conclude that If we use polymorphism so we can apply the names that could be easy to remember for the methods' purpose.
Learn more about the behavior here: brainly.com/question/9152289
Your car must have two red stoplights, seen from ______ feet in the daytime, that must come on when the foot brake is pressed.
A. 100
B. 200
C. 300
D. 400
Answer:
the answer is 300 feet in the daytime
Implement the generator function scale(s, k), which yields elements of the given iterable s, scaled by k. As an extra challenge, try writing this function using a yield from statement!
def scale(s, k):
"""Yield elements of the iterable s scaled by a number k.
>>> s = scale([1, 5, 2], 5)
>>> type(s)
>>> list(s)
[5, 25, 10]
>>> m = scale(naturals(), 2)
>>> [next(m) for _ in range(5)]
[2, 4, 6, 8, 10]
"""
Answer:
The generator function using yield from:
def scale(s, k):
yield from map(lambda x: x * k, s)
Another way to implement generator function that works same as above using only yield:
def scale(s, k):
for i in s:
yield i * k
Explanation:
The complete program is:
def scale(s, k):
"""Yield elements of the iterable s scaled by a number k.
>>> s = scale([1, 5, 2], 5)
>>> type(s)
<class 'generator'>
>>> list(s)
[5, 25, 10]
>>> m = scale(naturals(), 2)
>>> [next(m) for _ in range(5)]
[2, 4, 6, 8, 10]
"""
yield from map(lambda x: x * k, s)
If you want to see the working of the above generator function scale() as per mentioned in the above comments, use the following statements :
s = scale([1, 5, 2], 5)
print(type(s))
#The above print statement outputs:
#<class 'generator'>
print(list(s))
#The above print statement outputs a list s with following items:
#[5, 25, 10]
The function def scale(s, k): is
def scale(s, k):
yield from map(lambda x: x * k, s)
This function takes two parameters i.e. s and k and this function yields elements of the given iterable s, scaled by k.
In this statement: yield from map(lambda x: x * k, s)
yield from is used which allows to refactor a generator in a simple way by splitting up generator into multiple generators.
The yield from is used inside the body of a generator function.
The lambda function is a function that has any number of arguments but can only have one expression. This expression is evaluated to an iterable from which an iterator will be extracted. This iterator yields and receives values to or from the caller of the generator. Here the expression is x: x * k and iterable is s. This expression multiplies each item to k.
map() method applies the defined function for each time in an iterable.
The generator function can also be defined as:
def scale(s, k):
for i in s:
yield i * k
For the above example
s = scale([1, 5, 2], 5)
def scale(s,k): works as follows:
s = [1, 5, 2]
k = 5
for loop iterates for each item i in iterable s and yields i*k
i*k multiplies each element i.e 1,5 and 2 to k=5 and returns a list
At first iteration, for example, i*k = 1 * 5 = 5, next iteration i*k = 5*5 = 25 and last iteration i*k = 2*5 = 10. So the output. So
s = scale([1, 5, 2], 5) In this statement now s contains 5, 25 and 10
print(list(s)) prints the values of s in a list as: [5, 25, 10] So output is:
[5, 25, 10]
Which of the following statements is true of an encrypted file? * The file can be read only by a user with the decryption key The file can be read by the creator and system administrator The file can not be opened again The file can be opened but not read again
Answer:
The file can be read only by a user with the decryption key
Explanation:
The way encryption works is it scrambles the data in a file following the rules of the encryption algorithm using a certain key to tell it how to scramble everything.
Without the key, the computer doesn't know how to decrypt it.
This is true no matter who has access to the file, be it a system administrator, a hacker, or even a legitimate user who has somehow lost access to the key
Strictly speaking, encryption can be broken, but, especially with modern encryption, that's a matter of centuries, and isn't really feasible
The statement that is true of an encrypted file is that The file can be read only by a user with the decryption key.
What is decryption key?A decryption key is known to be a key that is given to Customers by a specific Distributor.
This key allows Customers to open and access the Software that they bought. The decryption key is a mechanism that permit that a file can be read only by a user.
Learn more about decryption key from
https://brainly.com/question/9979590
Write a function called "equals" that accepts 2 arguments The two arguments will be of type list The function should return one string, either "Equals" or "Not Equals" For the lists to be equal, they need to: Have the same number of elements Have all the elements be of the same type Have the order fo the elements be the same DO NOT USE "
Answer:
import numpy as np
def equals(list1, list2 ):
compare = np.all( list1, list2)
if ( compare == True):
print ( "Equals")
else :
print(" Not Equals")
Explanation:
This python function utilizes the numpy package to compare two list items passed as its argument. It prints out "equals" for a true result and "not equal" for a false result.
Write a program that reads in your question #2 Python source code file and counts the occurrence of each keyword in the file. Your program should prompt the user to enter the Python source code filename
Answer:
Here is the Python program:
import keyword #module that contains list of keywords of python
filename = input("Enter Python source code filename: ") # prompts user to enter the filename of a source code
code = open(filename, "r") # opens the file in read mode
keywords = keyword.kwlist #extract list of all keywords of Python and stored it into keywords
dictionary = dict() #creates a dictionary to store each keyword and its number of occurrence in source code
for statement in code: # iterates through each line of the source code in the file
statement = statement.strip() # removes the spaces in the statement of source code
words = statement.split(" ") #break each statement of the source code into a list of words by empty space separator
for word in words:# iterates through each word/item of the words list
if word in keywords:#checks if word in the code is present in the keywords list of Python
if word in dictionary: #checks if word is already present in the dictionary
dictionary[word] = dictionary[word] + 1 #if word is present in dictionary add one to the count of the existing word
else: #if word is not already present in the dictionary
dictionary[word] = 1 #add the word to the dictionary and set the count of word to 1
for key in list(dictionary.keys()): #iterates through each word in the list of all keys in dictionary
print(key, ":", dictionary[key])# prints keyword: occurrences in key:value format of dict
Explanation:
The program is well explained in the comments attached with each line of the program.
The program prompts the user to enter the name of the file that contains the Python source code. Then the file is opened in read mode using open() method.
Then the keyword.kwlist statement contains the list of all keywords of Python. These are stored in keywords.
Then a dictionary is created which is used to store the words from the source code that are the keywords along with their number of occurrences in the file.
Then source code is split into the lines (statements) and the first for loop iterates through each line and removes the spaces in the statement of source code .
Then the lines are split into a list of words using split() method. The second for loop is used to iterate through each word in the list of words of the source code. Now each word is matched with the list of keywords of Python that is stored in keywords. If a word in the source code of the file is present in the keywords then that word is added to the dictionary and the count of that word is set to 1. If the word is already present in the dictionary. For example if there are 3 "import" keywords in the source code and if 1 of the import keywords is already in the dictionary. So when the second import keyword is found, then the count of that keyword is increased by 1 so that becomes 2.
Then the last loop is used to print each word of the Python that is a keyword along with its number of occurrences in the file.
The program and its output is attached in a screenshot. I have used this program as source code file.
Bharath has made a table of content for his document in Open Office, in which he wants to make few changes, but he is unable to make the changes. Give reason. Explain how he can make the necessary changes
Answer:
H cannot update it because it is probably protected.
If you cannot click in the table of contents, it is probably because it is protected. To disable this protection, choose Tools > Options > OpenOffice.org Writer > Formatting Aids, and then select Enable in the Cursor in protected areas section. If you wish to edit the table of contents without enabling the cursor, you can access it from the Navigator.
Explanation:
. To update a table of contents when changes are made to the document:
Right-click anywhere in the TOC.
From the pop-up menu, choose Update Index/Table. Writer updates the table of contents to reflect the changes in the document.
You can also update the index from the Navigator by right-clicking on Indexes > Table of Contents1 and choosing Index > Update from the pop-up menu.
Review the given requirements using the checklist and discover possible problems with them. The following requirements are for a library system which is an interactive system providing access to a large document database and which allows the automated ordering and electronic delivery of documents to local and remote end-users. Some requirements for this system are: Req. 1 The user interface shall be html. Users shall access the system via standard web browsers such as Netscape and Internet Explorer. Req. 2 The system shall primarily an end-user system. Users shall use the system within the constraints of the permissions assigned by the administrator to identify, locate, order and receive documents. Req. 3 Users shall communicate with the system mainly via the html interface. Req. 4 User shall provide input to the system via the html interface. Req. 5 The system shall give output to the user via the html interface, email and print. The print output shall mainly be documents.
Answer:
Redundancy
Req. 1 and Req. 3 are seemed to say the same thing. We need to remove the first sentence in Req. 1
Conflict and understandability
Req. 1 states that access is through web browser while Req. 4 states that access is via html. We have to re-write the Req. 3 to make it clear that users do not actually have to write directly html to communicate with the system.
Completeness
Req. 5 states that print out will “mainly” be documents. What else might be printed? What other inputs will be produced?
Either remove mainly or clarify other print out.
What version of html or web browser is assumed in Req. 1 and Req. 3?
Explanation:
Develop a CPP program to test is an array conforms heap ordered binary tree. This program read data from cin (console) and gives an error if the last item entered violates the heap condition. Use will enter at most 7 numbers. Example runs and comments (after // ) are below. Your program does not print any comments. An output similar to Exp-3 and Exp-4 is expected.
Exp-1:
Enter a number: 65
Enter a number: 56 // this is first item (root,[1]) in the heap three. it does not violate any other item. So, no // this is third [3] number, should be less than or equal to its root ([1])
Enter a number: 45 // this is fourth number, should be less than or equal to its root ([2])
Enter a number: 61 // this is fifth number, should be less than or equal to its root ([2]). It is not, 61 > 55. The 61 violated the heap.
Exp-2:
Enter a number: 100
Enter a number: 95 1/ 95 < 100, OK
Enter a number: 76 // 76 < 100, OK
Enter a number: 58 // 58 < 95, OK
Enter a number: 66 1/ 66 < 95, OK
Enter a number: 58 // 58 < 76, OK
Enter a number: 66 // 66 < 76, OK
Exp-3:
Enter a number: -15
Enter a number: -5
-5 violated the heap.
Exp-4:
Enter a number: 45
Enter a number: 0
Enter a number: 55
55 violated the heap.
Answer:
Following are the code to this question:
#include<iostream>//import header file
using namespace std;
int main()//defining main method
{
int ar[7];//defining 1_D array that stores value
int i,x=0,l1=1,j; //defining integer variable
for(i=0;i<7;i++)//defining for loop for input value from user ends
{
cout<<"Enter a Number: ";//print message
cin>>ar[i];//input value in array
if(l1<=2 && i>0)//using if block that checks the array values
{
x++;//increment the value of x by 1
}
if(l1>2 && i>0)//using if block that checks the array values
{
l1=l1-2;//using l1 variable that decrases the l1 value by 2
}
j=i-x;//using j variable that holds the index of the root of the subtree
if(i>0 && ar[j]>ar[i])// use if block that checks heap condition
{
l1++; //increment the value of l1 variable
}
if(i>0 && ar[j]<ar[i])// using the if block that violate the heap rule
{
cout<<ar[i]<<" "<<"Violate the heap";//print message with value
break;//using break keyword
}
}
return 0;
}
Output:
1)
Enter a Number: -15
Enter a Number: -5
-5 Violate the heap
2)
Enter a Number: 45
Enter a Number: 0
Enter a Number: 55
55 Violate the heap
Explanation:
In the above-given C++ language code, an array "ar" and other integer variables " i,x,l1, j" is declared, in which "i" variable used in the loop for input values from the user end.In this loop two, if block is defined, that checks the array values and in the first, if the block it will increment the value of x, and in the second if the block, it will decrease the l1 value by 2.In the next step, j variable is used that is the index of the root of the subtree. In the next step, another if block is used, that checks heap condition, that increment the value of l1 variable. In the, if block it violate the heap rule and print its values.The fact that the speed of a vehicle is lower than the prescribed limits shall relieve the driver from the duty to decrease speed when approaching and crossing an intersection. True or false
Explanation:
the answer is false ........
The fact that the speed of a vehicle is lower than the prescribed limits shall relieve the driver from the duty to decrease speed when approaching and crossing an intersection is not true.
What is intersection in the traffic rules?An intersection serves as the point where many lanes cross on the road which is a point where driver is required to follow the traffic rules.
However, the above statement is not true because , a driver can decide not decrease speed when approaching and crossing an intersection, even though it is a punishable offense in traffic rules.
Read more on traffic rules here: https://brainly.com/question/1071840
#SPJ2
What is the quick key to highlighting a column?
Ctrl + down arrow
Ctrl + Shift + down arrow
Right-click + down arrow
Ctrl + Windows + down arrow
The quick key to highlighting a column is the Ctrl + Shift + down arrow. Thus, option (b) is correct.
What is column?The term column refers to how data is organized vertically from top to bottom. Columns are groups of cells that are arranged vertically and run from top to bottom. A column is a group of cells in a table that are vertically aligned. The column is the used in the excel worksheet.
The quick key for highlighting a column is Ctrl + Shift + down arrow. To select downward, press Ctrl-Shift-Down Arrow. To pick anything, use Ctrl-Shift-Right Arrow, then Ctrl-Shift-Down Arrow. In the Move/Highlight Cells, the was employed. The majority of the time, the excel worksheet was used.
As a result, the quick key to highlighting a column is the Ctrl + Shift + down arrow. Therefore, option (b) is correct.
Learn more about the column, here:
https://brainly.com/question/3642260
#SPJ6
Answer:
its (B) ctrl+shift+down arrow
hope this helps <3
Explanation:
Define the missing method. licenseNum is created as: (100000 * customID) licenseYear, where customID is a method parameter. Sample output with inputs 2014 777:
Answer:
I am writing the program in JAVA and C++
JAVA:
public int createLicenseNum(int customID){ //class that takes the customID as parameter and creates and returns the licenseNum
licenseNum = (100000 * customID) + licenseYear; //licenseNum creation formula
return(licenseNum); }
In C++ :
void DogLicense::CreateLicenseNum(int customID){ //class that takes the customID as parameter and creates the licenseNum
licenseNum = (100000 * customID) + licenseYear; } //licenseNum creation formula
Explanation:
createLicenseNum method takes customID as its parameter. The formula inside the function is:
licenseNum = (100000 * customID) + licenseYear;
This multiplies 100000 to the customID and adds the result to the licenseYear and assigns the result of this whole expression to licenseNum.
For example if the SetYear(2014) means the value of licenseYear is set to 2014 and CreateLicenseNum(777) this statement calls createLicenseNum method by passing 777 value as customID to this function. So this means licenseYear = 2014 and customID = 777
When the CreateLicenseNum function is invoked it computes and returns the value of licenseNum as:
licenseNum = (100000 * customID) + licenseYear;
= (100000 * 777) + 2014
= 77700000 + 2014
licenseNum = 77702014
So the output is:
Dog license: 77702014
To call this function in JAVA:
public class CallDogLicense {
public static void main(String[] args) {//start of main() function
DogLicense dog1 = new DogLicense();//create instance of Dog class
dog1.setYear(2014); // calls setYear passing 2014
dog1.createLicenseNum(777);// calls createLicenseNum passing 777 as customID value
System.out.println("Dog license: " + dog1.getLicenseNum()); //calls getLicenseNum to get the computed licenceNum value
return; } }
Both the programs along with the output are attached as a screenshot.
Answer:
public int createLicenseNum(int customID){
licenseNum = (100000 * customID) + licenseYear;
return(licenseNum);
}
Explanation:
What will be displayed after the following code executes? mystr = 'yes' yourstr = 'no' mystr += yourstr * 2 print(mystr)
Answer:
yesnono
Explanation:
mystr = 'yes'
yourstr = 'no'
mystr += yourstr * 2
mystr = "yes"yourstr * 2 = "no"+"no"yes + no+noyesnonoCHALLENGE ACTIVITY 3.7.2: Type casting: Reading and adding values.
Assign totalowls with the sum of num_owls A and num_owls_B.
Sample output with inputs: 34
Number of owls: 7
1. total_owls -
2.
3. num_owls A - input
4. num_owls_B - input
5.
6. " Your solution goes here
7.
8. print("Number of owls:', total_owls)
Answer:
total_owls = 0
num_owls_A = int(input())
num_owls_B = int(input())
total_owls = num_owls_A + num_owls_B
print("Number of owls:", total_owls)
Explanation:
Initialize the total_owls as 0
Ask the user to enter num_owls_A and num_owls_B, convert the input to int
Sum the num_owls_A and num_owls_B and set it to the total_owls
Print the total_owls
avg_owls=0.0
num_owls_zooA = int(input())
num_owls_zooB = int(input())
num_owls_zooC = int(input())
num_zoos = 3
avg_owls = (num_owls_zooA + num_owls_zooB + num_owls_zooC) / num_zoos
print('Average owls per zoo:', int(avg_owls))
There is a problem while you are trying the calculate the average owls per zoo.
As you may know, in order to calculate the average, you need to get the total number of owls in all the zoos, then divide it to the number of zoos. That is why you need to sum num_owls_zooA + num_owls_zooB + num_owls_zooC and divide the result by num_zoos
Be aware that the average is printed as integer value. That is why you need to cast the avg_owls to an int as int(avg_owls)
Learn more about integer value on:
https://brainly.com/question/31945383
#SPJ6
Write a program that reads the input.txt file character by character and writes the content of the input file to output.txt with capitalize each word (it means upper case the first letter of a word and lowercase remaining letters of the word)
Answer:
def case_convertfile( file_name):
with open(" new_file","x") as file:
file.close( )
with open("file_name", "r") as txt_file:
while True:
word = txt_file.readline( )
word_split= word.split(" ")
for word in word_split:
upper_case = word.uppercase( )
file= open("new_file","w+")
file= open("new_file","a+")
file.write(upper_case)
txt_file.close( )
file.close( )
Explanation:
This python function would open an existing file with read privilege and a new file with write and append privileges read and capitalize the content of the old file and store it in the new file.
Windows workstations all have elements of server software built-in. What are these elements, and why is the Windows Professional OS not considered a server?
Answer:
The answer is below
Explanation:
Elements of Server software that is built-in, in Windows workstations are:
1. Hard drives,
2. RAM (Random Access Memory)
3. Processors
4. Network adapters.
Windows Professional OS is not considered a server due to the following:
1. Windows Professional OS has a limit on the number of client connections it allowed.
2. Unlike Server, Professional OS uses less memory
2. In comparison to Server, Professional OS uses the CPU less efficiently
4. Professional OS is not built to process background tasks, unlike Server that is configured to perform background tasks.
UAAR is planning to build in house software similar to Zoom Application. University Authorities contact with you in order to provide best solution with in limited time and limited resources in term of cost.
Describe the roles, Artifacts and activities, keeping in view Scrum process model.
Compare and contract your answer with scrum over XP for development of above mention system. Justify your answer with the help of strong reasons, why you choose scrum model over XP model. How scrum is more productive for project management. Furthermore, highlight the shortcoming of XP model.
Answer:
Following are the answer to this question:
Explanation:
If working to develop Zoom-like house software, its best solution is now in a limited period of time even with effectively reduced assets;
Evaluate all roles in preparation
Create a "Pool Draw"
Choose a singular set of resources.
Utilize Time Recording.
Concentrate on assignments and project objectives.
An object, in which by-product of the development in the software. It's created for the development of even a software program. It could include database schemas, illustrations, configuration screenplays-the list just goes on.
All development activities of Scrum are composed with one or several groups from a lineout, each containing four ruck roles:
Holder of the drug
ScrumMaster and Master
Equipment for development.
Owner of the drug
It is the motivating core of the product marketing idea, that Keeps transparent the vision about what the team member is trying to seek so that to accomplish as well as interacts to all of the other members, the project manager is responsible for the success of the way to solve being formed or retained.
ScrumMaster It operates as a mentor and providing guidance throughout the development phase, it takes a leadership position in the abolishment with impediments that also impact employee productivity and therefore have no ability to control the team, but the roles of both the project team or program manager are not quite the same thing. It works as a leader instead of the management team.
Equipe for development
The Scrum characterizes the design team as a diverse, multi-functional community of individuals who design, construct as well as evaluate the application of those who want.
In this usually 5 to 9 individuals; one's representatives should be able to make quality responsive applications collaboratively.
It is a framework that operates along with teams. It is often seen as agile project management as well as explains a set of conferences, techniques, and roles that also assist individuals to organize as well as complete their employees together. The multidisciplinary team from Scrum means that a person should take a feature from idea to completion.Scrum and XP differences:
Its team members in Scrum usually operate in the various weeks with one month-long incarnation. The XP teams generally work in incarnations which are either one two weeklong. Scrum doesn't write a prescription the certain project management; XP seems to do. Scrum may not make access to other their sprints. XP teams are far more receptive to intervention inside of their repetitions.You bought a monochrome laser printer two years ago. The printer has gradually stopped feeding paper. Which printer component should you check first
Answer:
Pick up roller
Explanation:
you should first check the pickup roller component. This component is the part of the printer that picks paper up from the paper tray. The pickup roller links the printer and the paper. When the printer printer is running, the roller would take paper from the paper tray for the printer to print on. One of the issues it can have is Paper jam where the roller would stop turning so that it will no longer be picking papers up from the tray.
What will be assigned to the variable s_string after the following code executes? special = '1357 Country Ln.' s_string = special[ :4] Group of answer choices
Answer:
s_string = 1357
Explanation:
character: index
1: 0
3: 1
5: 2
7: 3
: 4
C: 5
o: 6
u: 7
n: 8
t: 9
r: 10
y: 11
: 12
L: 13
n: 14
. : 15
s_tring = special[:4]
s_tring = special[0] + special[1] + special[2] + special[3]
s_string = 1357
3. How many bytes of storage space would be required to store a 400-page novel in which each page contains 3500 characters if ASCII were used? How many bytes would be required if Unicode were used? Represent the answer in MB
Answer:
A total of 79.3mb will be needed
Generating a signature with RSA alone on a long message would be too slow (presumably using cipher block chaining). Suppose we could do division quickly. Would it be reasonable to compute an RSA signature on a long message by first finding what the message equals (taking the message as a big integer), mod n, and signing that?
Answer:
Following are the algorithm to this question:
Explanation:
In the RSA algorithm can be defined as follows:
In this algorithm, we select two separate prime numbers that are the "P and Q", To protection purposes, both p and q combines are supposed to become dynamically chosen but must be similar in scale but 'unique in length' so render it easier to influence. Its value can be found by the main analysis effectively.
Computing N = PQ.
In this, N can be used for key pair, that is public and private together as the unit and the Length was its key length, normally is spoken bits. Measure,
[tex]\lambda (N) = \ lcm( \lambda (P), \lambda (Q)) = \ lcm(P- 1, Q - 1)[/tex] where [tex]\lambda[/tex] is the total function of Carmichaels. It is a privately held value. Selecting the integer E to be relatively prime from [tex]1<E < \lambda (N)[/tex]and [tex]gcd(E, \lambda (N) ) = 1;[/tex] that is [tex]E \ \ and \ \ \lambda (N)[/tex]. D was its complex number equivalent to E (modulo [tex]\lambda (N)[/tex] ); that is d was its design multiplicative equivalent of E-1.
It's more evident as a fix for d provided of DE ≡ 1 (modulo [tex]\lambda (N)[/tex] ).E with an automatic warning latitude or little mass of bigging contribute most frequently to 216 + 1 = 65,537 more qualified encrypted data.
In some situations it's was shown that far lower E values (such as 3) are less stable.
E is eligible as a supporter of the public key.
D is retained as the personal supporter of its key.
Its digital signature was its module N and the assistance for the community (or authentication). Its secret key includes that modulus N and coded (or decoding) sponsor D, that must be kept private. P, Q, and [tex]\lambda (N)[/tex] will also be confined as they can be used in measuring D. The Euler totient operates [tex]\varphi (N) = (P-1)(Q - 1)[/tex] however, could even, as mentioned throughout the initial RSA paper, have been used to compute the private exponent D rather than λ(N).
It applies because [tex]\varphi (N)[/tex], which can always be split into [tex]\lambda (N)[/tex], and thus any D satisfying DE ≡ 1, it can also satisfy (mod [tex]\lambda (N)[/tex]). It works because [tex]\varphi (N)[/tex], will always be divided by [tex]\varphi (N)[/tex],. That d issue, in this case, measurement provides a result which is larger than necessary (i.e. D > [tex]\lambda (N)[/tex] ) for time - to - time). Many RSA frameworks assume notation are generated either by methodology, however, some concepts like fips, 186-4, may demand that D< [tex]\lambda (N)[/tex]. if they use a private follower D, rather than by streamlined decoding method mostly based on a china rest theorem. Every sensitive "over-sized" exponential which does not cooperate may always be reduced to a shorter corresponding exponential by modulo [tex]\lambda (N)[/tex].
As there are common threads (P− 1) and (Q – 1) which are present throughout the [tex]N-1 = PQ-1 = (P -1)(Q - 1)+ (P-1) + (Q- 1))[/tex], it's also possible, if there are any, for all the common factors [tex](P -1) \ \ \ and \ \ (Q - 1)[/tex]to become very small, if necessary.
Indication: Its original writers of RSA articles conduct their main age range by choosing E as a modular D-reverse (module [tex]\varphi (N)[/tex]) multiplying. Because a low value (e.g. 65,537) is beneficial for E to improve the testing purpose, existing RSA implementation, such as PKCS#1, rather use E and compute D.
what level of security access should a computer user have to do their job?
Answer:
A computer user should only have as much access as required to do their job.
Explanation:
A computer user should not be able to access resources outside of their job requirement, as this poses a potential attack vector for an insider threat. By limiting the scope of resources to just what is needed for the user's specific job, the threat to the system or company can be mitigated with additional access control features for the computer user. Never allow permission higher than what are needed to accomplish the task.
Cheers.
Input a list of positive numbers, find the mean (average) of the numbers, and output the result. Use a subprogram to input the numbers, a function to find the mean, and a subprogram to output the result. Use a subprogram to Input the numbers, a Function to find the mean and a subprogram to output the Result.
Answer:
def inputNumber():
l = []
num = int(input("Enter the number of integers you want to enter\n"))
for i in range(0,num):
print("Enter the ", i+1, " integers ")
a = float(input())
l.append(a)
return l
def averageCalculator(l):
total = 0
for i in l:
total += i
avg = total/len(l)
return avg
def printoutput(avg):
print("The average of numbers is ", avg)
l = inputNumber()
avg = averageCalculator(l)
printoutput(avg)
Explanation:
A subprogram may be considered as a method where we pass some values in the arguments and return some value.
The answer is written in python language, where we have used
inputNumber() subprogram to get the input from the user.
function averageCalculator() to calculate the average.
printoutput() subprogram to print the output or the average of the numbers.
Please refer to the attached image for better understanding of the indentation of code.
Now, let us learn about them one by one:
inputNumber(): We get the number of values to be entered as an integer value and then get the numbers as float.
Store the values in a list and return the list to the caller main program.
averageCalculator(l): Contains a list as argument as we got from inputNumber(). It sums all the numbers and divides with total number to find the average. Returns the average value to the caller main program.
printoutput(avg): Contains an argument which is the average calculated in the averageCalculator(). It prints the argument passed to it.
Ann, a user, reports that she is no longer able to access any network resources. Upon further investigation, a technician notices that her PC is receiving an IP address that is not part of the DHCP scope. Which of the following explains the type of address being assigned?
A. Unicast address
B. IPV6
C. DHCP6
D. APIPA
Answer: APIPA
Explanation:
Automatic Private IP Addressing (APIPA) is a Windows based operating systems feature that allows a computer to assign itself automatically to an IP address even though there is DHCP server to perform the function.
From the information that has been provided in the question, we can see that the type of address that is used is APIPA.
Suppose there are 4 nodes sharing a broadcast channel using TDMA protocol. Suppose at time t=0: • Node 1 has 6 frames to transmit, • Node 2 has 4 frames to transmit, • Node 3 has 8 frames to transmit, • Node 4 has 3 frames to transmit. Maximum number of frames which can be transmitted by a node in a time slot = 3 The time required to transmit one frame = 1 Second Explain how TDMA protocol works to complete this task? How much time will it take to transmit all frames?
Answer:
Following are the description of the given nodes:
Explanation:
The Multiple Access frequency - division facilitates control by granting every node a fixed time slot. Also, every slot seems to be identical in width. Its whole channel bandwidth is often used in every channel node. Compared to FDMA it takes more time.
Time slot=3 frames for all the above scenario
In the first point, It is reserved the node 1, and as well as 3 frames were also transmitted 1. In the second point, It is reserved the node 2, and as well as 3 frames are transmitted. In the third point, It is reserved 3 nodes, and as well as 3 frames were transmitted. In the fourth point, It is reserved 4 slots and the transmit 3 frames. In the fifth point, It stores the slot 1 and the transmit 3 frames. In the sixth point, It stores the slot 2 and the transmit 1 frame. In the seventh point, It stores the slot 3 and the transmit 3 frames. In the Eight points, It stores the slot 3 and the transmit 2 frames.Time interval = number of frames in first slot Time to send 1 frame number of images
[tex]= 8 \times 3 \times 1 \\\\ = 8 \times 3 \\\\= 24 \ seconds[/tex]
Which of the following peripheral devices can be used for both input and output? mouse touch screen on a tablet computer printer CPU
Answer:
mouse printer CPU touch screen
Explanation:
on a tablet computer hope this helps you :)
the part of the computer that contains the brain , or central processing unit , is also known the what ?
Answer:
system unit
Explanation:
A system unit is the part of a computer that contains the brain or central processing unit. The primary device such as central processing unit as contained in the system unit perform operations hence produces result for complex calculations.
The system unit also house other main components of a computer system like hard drive , CPU, motherboard and RAM. The major work that a computer is required to do or performed is carried out by the system unit. Other peripheral devices are the keyboard, monitor and mouse.
Individually or in a group find as many different examples as you can of physical controls and displays.a. List themb. Try to group them, or classify them.c. Discuss whether you believe the control or display is suitable for its purpose.
Answer:
Open ended investigation
Explanation:
The above is an example of an open ended investigation. In understanding what an open ended investigation is, we first of all need to understand what open endedness means. Open endedness means whether one solution or answer is possible. In other words it means that there may be various ways and alternatives to solve or answer a question or bring solution to an investigation.
From the definition, we can deduce that an open ended investigation is a practical investigation that requires students to utilize procedural and substantive skills in arriving at conclusion through evidence gathered from open ended research or experiment(as in not close ended, not limited to ready made options, freedom to explore all possibilities). This is seen in the example question where students are asked to explore the different examples of physical controls and displays and also discuss their observations. Here students are not required to produce a predefined answer but are free to proffer their own solutions
An organization is planning to implement a VPN. They want to ensure that after a VPN client connects to the VPN server, all traffic from the VPN client is encrypted. Which of the following would BEST meet this goal?a. Split tunnelb. Full tunnelc. IPsec using Tunnel moded. IPsec using Transport mode
Answer:
B. Full tunnel.
Explanation:
In this scenario, an organization is planning to implement a virtual private network (VPN). They want to ensure that after a VPN client connects to the VPN server, all traffic from the VPN client is encrypted. The best method to meet this goal is to use a full tunnel.
A full tunnel is a type of virtual private network that routes and encrypts all traffics or request on a particular network. It is a bidirectional form of encrypting all traffics in a network.
On the other hand, a split tunnel is a type of virtual private network that only encrypts traffic from the internet to the VPN client.
Hence, the full tunnel method is the most secured type of virtual private network.
