The distribution of C) X+Y is a Poisson RV with parameter 9.
This is because the sum of two independent Poisson distributions with parameters λ1 and λ2 is also a Poisson distribution with parameter λ1 + λ2. Therefore, X+Y follows a Poisson distribution with parameter 4+5 = 9.
Option A is incorrect because an exponential distribution cannot arise from the sum of two Poisson distributions. Option B is also incorrect because the parameter of X+Y is not the average of the parameters of X and Y. Option C is the correct answer as explained above.
In summary, the distribution of X+Y is Poisson with parameter 9.
For more questions like Poisson distributions click the link below:
https://brainly.com/question/17280826
#SPJ11
Alfonso wants to purchase a pool membership
for the summer. He has no more than y dollars to
spend. The Aquatics Club charges an initial fee
of $75 plus $20 per month. The Swimming Hole
charges an initial fee of $15 plus $65 per month.
Write a system of inequalities that you can use to
determine which company offers the better deal.
Let x represent the number of months.
The system of inequalities of the company with the better offer is 75 + 20x ≤ y and 15 + 65x ≤ y
Identifying the system of inequalitiesLet's use A to represent the total cost (in dollars) of purchasing a pool membership from the Aquatics Club,
Let S represent the total cost of purchasing a pool membership from the Swimming Hole.
Then we can write the following system of inequalities:
A = 75 + 20x (total cost of Aquatics Club membership)
S = 15 + 65x (total cost of Swimming Hole membership)
Alfonso has no more than y dollars to spend
So, we have
75 + 20x ≤ y
15 + 65x ≤ y
Hence, the system is 75 + 20x ≤ y and 15 + 65x ≤ y
Read more about system of inequalities at
https://brainly.com/question/23093488
#SPJ1
I NEED HELPP PLEASEEEEEEEE
The slope between the points (-3, 0) and (0, -1) is -1/3.
What is slope?The slope of a line serves as a gauge for its steepness. It may be calculated by dividing the difference in y-coordinate by the difference in x-coordinate between any two points on a line. A line's slope might be zero, positive, negative, or undefinable. A line with a positive slope is moving upward from left to right, a negative slope is moving downward from left to right, and a line with a zero slope is level. The line is vertical if the slope is undefinable.
Let us consider the first two points (-3, 0) and (0, -1).
The slope of the line is given as:
m = (y2 - y1) / (x2 - x1)
Substituting the values we have:
m = (-1 - 0) / (0 - (-3)) = -1/3
Hence, the slope between the points (-3, 0) and (0, -1) is -1/3.
Learn more about slope of line here:
https://brainly.com/question/11559942
#SPJ1
a parachutist rate during a free fall reaches 132 feet per second. what is this rate in meters per second? at this rate, how many meters will the parachutist fall during 10 seconds of free fall. in your computations, assume that 1 meter is equal to 3.3 feet. (do not round your answer)
Parachutist's rate during free fall is 40 meters per second and will fall approximately 490 meters during 10 seconds of free fall.
How to convert feet to meters?First, we need to convert 132 feet per second to meters per second. We know that 1 meter is equal to 3.3 feet, so we can use the following conversion factor:
[tex]$\frac{3meter}{3.3 feet}[/tex]
To convert feet per second to meters per second, we can multiply by the conversion factor:
[tex]132 (\frac{1}{3.3} ) = 40 meters/second[/tex]
Therefore, the parachutist's rate during free fall is 40 meters per second.
Next, we can use the following formula to find the distance the parachutist falls during 10 seconds of free fall:
distance =[tex]\frac{1}{2}[/tex] * acceleration * time²
where acceleration due to gravity is approximately 9.8 meters/second^2.
Substituting the given values, we get:
distance = [tex]\frac{1}{2}[/tex] * 9.8 meters/second² * (10 seconds)²
distance = 490 meters
Therefore, the parachutist will fall approximately 490 meters during 10 seconds of free fall.
To know more about Foot visit:
brainly.com/question/14230645
#SPJ1
write down the name of shape W
A hexagon with two lines
hope helped you please make me brainalist and keep smiling dude
I hope you are form India
Suppose that the insurance companies did do a survey. They randomly surveyed 400 drivers and found that 320 claimed they always buckle up. We are interested in the population proportion of drivers who claim they always buckle up.a.i. x = __________ii. n = __________iii. p′ = __________b. Define the random variables X and P′, in words.c. Which distribution should you use for this problem? Explain your choice.d. Construct a 95% confidence interval for the population proportion who claim they always buckle up.i. State the confidence interval.ii. Sketch the graph.iii. Calculate the error bound.e. If this survey were done by telephone, list three difficulties the companies might have in obtaining random results.
We are interested in the population proportion of drivers who claim they always buckle upa.i. x = 320 ii. n = 400 iii. p′ = 0.8
b. The random variable X represents the number of drivers out of the sample of 400 who claim they always buckle up, while P′ represents the sample proportion of drivers who claim they always buckle up.
c. The distribution to use for this problem is the normal distribution because the sample size is large enough (n=400) and the population proportion is not known.
d. i. The 95% confidence interval for the population proportion who claim they always buckle up is (0.7709, 0.8291).
ii. The graph is a normal distribution curve with mean p′ = 0.8 and standard deviation σ = sqrt[p′(1-p′)/n].
iii. The error bound is 0.0291.
e. Three difficulties the insurance companies might have in obtaining random results from a telephone survey are:
Selection bias: The survey might not be truly random if the telephone numbers selected are not representative of the population of interest.
Nonresponse bias: People may choose not to participate in the survey or may not be reached, which could bias the results.
Social desirability bias: Respondents may give socially desirable answers rather than their true opinions, which could also bias the results.
For more questions like Variable click the link below:
https://brainly.com/question/17344045
#SPJ11
It is well documented that a typical washing machine can last anywhere between 5 to 20 years. Let the life of a washing machine be represented by a lognormal variable, Y = eX where X is normally distributed. In addition, let the mean and standard deviation of the life of a washing machine be 14 years and 2 years, respectively. [You may find it useful to reference the z table.] a. Compute the mean and the standard deviation of X. (Round your intermediate calculations to at least 4 decimal places and final answers to 4 decimal places.) b. What proportion of the washing machines will last for more than 15 years? (Round your intermediate calculations to at least 4 decimal places, "z" value to 2 decimal places, and final answer to 4 decimal places.) c. What proportion of the washing machines will last for less than 10 years? (Round your intermediate calculations to at least 4 decimal places, "z" value to 2 decimal places, and final answer to 4 decimal places.) d. Compute the 90th percentile of the life of the washing machines. (Round your intermediate calculations to at least 4 decimal places, "z" value to 3 decimal places, and final answer to the nearest whole number.)
a. The mean of X is 1.7549 and the standard deviation is 0.3536.
b. To calculate the proportion of washing machines that will last for more than 15 years, we need to use the standard normal distribution table. The z-score for 15 years is (15-14)/0.3536 = 2.822. Using the table, we find that the proportion of washing machines that will last for more than 15 years is 0.9968.
c. To calculate the proportion of washing machines that will last for less than 10 years, we need to use the standard normal distribution table. The z-score for 10 years is (10-14)/0.3536 = -2.822. Using the table, we find that the proportion of washing machines that will last for less than 10 years is 0.0032.
d. To calculate the 90th percentile of the life of the washing machines, we need to use the standard normal distribution table. The z-score for the 90th percentile is 1.28. Using the table, we find that the 90th percentile is 17 years.
To learn more about normal distribution refer :
https://brainly.com/question/29509087
#SPJ11
which part of this graph shows a non-linear relationship
Answer:
A.
Step-by-step explanation:
machines at a factory produce circular washers with a specified diameter. the quality control manager at the factory periodically tests a random sample of washers to be sure that greater than 90 percent of the washers are produced with the specified diameter. the null hypothesis of the test is that the proportion of all washers produced with the specified diameter is equal to 90 percent. the alternative hypothesis is that the proportion of all washers produced with the specified diameter is greater than 90 percent. which of the following describes a type i error that could result from the test? responses the test does not provide convincing evidence that the proportion is greater than 90%, but the actual proportion is greater than 90%. the test does not provide convincing evidence that the proportion is greater than 90%, but the actual proportion is greater than 90%. the test does not provide convincing evidence that the proportion is greater than 90%, but the actual proportion is equal to 90%. the test does not provide convincing evidence that the proportion is greater than 90%, but the actual proportion is equal to 90%. the test provides convincing evidence that the proportion is greater than 90%, but the actual proportion is equal to 90%. the test provides convincing evidence that the proportion is greater than 90%, but the actual proportion is equal to 90%. the test provides convincing evidence that the proportion is greater than 90%, but the actual proportion is greater than 90%. the test provides convincing evidence that the proportion is greater than 90%, but the actual proportion is greater than 90%. a type i error is not possible for this hypothesis test.
Answer:
the test does not provide convincing evidence that the proportion is greater than 90%
evaluate the diagram below, and find the measures of the missing angles
Answer:
A=100
B= 80
C=80
D=100
E=80
F=80
G=100
Step-by-step explanation:
Two ropes are attached to a tree, and forces of F_1 = 1.31 + 4.6J n and F_2 = 3.2i + 6.8j n are applied. The forces are coplanar (in the same plane). What is the resultant (net force) of these two force vectors (in N)? (Express your answer in vector form.) Find the magnitude (in N) and direction (in degrees counterclockwise from the +x-axis) of this net force.
The magnitude and direction of the net force are found by adding the two forces together as resultant force vectors.
a) 11.82 N
b) 74.07°
To find the net force, we add the two force vectors F_1 and F_2:
Fnet = F_1 + F_2
Fnet = (1.31 + 4.6j) N + (3.2i + 6.8j) N
Fnet = 3.2i + (1.31 + 4.6j + 6.8j) N
Fnet = 3.2i + (1.31 + 11.4j) N
To find the magnitude of the net force, we use the Pythagorean theorem:
|Fnet| = sqrt[(3.2)^2 + (1.31 + 11.4)^2] N
|Fnet| ≈ 11.6 N
To find the direction of the net force, we use the inverse tangent function:
θ = tan^(-1)(y/x)
θ = tan^(-1)(11.4/3.2)
θ ≈ 73.8 degrees
Since the net force is in the first quadrant, the direction counterclockwise from the +x-axis is simply θ:
Direction = 73.8 degrees counterclockwise from the +x-axis
Therefore, the net force is Fnet = 3.2i + (1.31 + 11.4j) N, with a magnitude of approximately 11.6 N and a direction of approximately 73.8 degrees counterclockwise from the +x-axis.
To know more about the magnitude and direction of the "net force": https://brainly.com/question/10409611
#SPJ11
Which choice is an exponential function?
Of(x)=x²+6
Of(x)=5(3)*
Of(x) = 3x + 7
Of(x) = |2x+ 41
Answer:1st one
Step-by-step explanation:
I need help asap I just need atleast one of these explained and I can do the rest
The factοred fοrm οf a pοlynοmial is
1. 30b³- 54b² = 6b²(5b−9)
2. 3y⁵ - 48y³ = 3y³(y −4)(y + 4)
3. x³ + 8 = (x + 2) (x² – 2x + 2²)
4. y³ - 64 = (y - 4) (y² – 4y + 4²)
5. 8c³ + 343(2c + 7)(4c² − 14c + 49)
What dοes a pοlynοmial functiοn in factοred fοrm lοοk like?The factοred fοrm οf a pοlynοmial is represented as a³ + b³ = (a + b) (a² – ab + b²). All equatiοns are cοmpοsed οf pοlynοmials. Earlier we've οnly shοwn yοu hοw tο sοlve equatiοns cοntaining pοlynοmials οf the first degree, but it is οf cοurse pοssible tο sοlve equatiοns οf a higher degree.
One way tο sοlve a pοlynοmial equatiοn is tο use the zerο-prοduct prοperty. If yοu remember frοm earlier chapters the prοperty οf zerο tells us that the prοduct οf any real number and zerο is zerο.
We will use the formula
a³ + b³ = (a + b) (a² – ab + b²)
And
a³ - b³ = (a - b) (a² – ab + b²)
1. [tex]30b^3-\ 54b^2[/tex]
⇒ 6b²(5b−9)
2. 3y⁵ - 48y³
⇒ 3y³( y² - 16y)
⇒ 3y³( y² - 4 + 4 - 16y)
⇒ 3y³(y −4)(y + 4)
3. x³ + 8
⇒ x³ + 2³
Using a³ + b³ = (a + b) (a² – ab + b²)
⇒ x³ + 2³
⇒ (x + 2) (x² – 2x + 2²)
4. y³ - 64
⇒ y³ - 4³
Using a³ - b³ = (a - b) (a² – ab + b²)
⇒ y³ - 4³
⇒ (y - 4) (y² – 4y + 4²)
5. 8c³ + 343
Using a³ + b³ = (a + b) (a² – ab + b²)
2c + 7
(2c + 7)(4c² − 14c + 49)
To know more about factored form visit:-
brainly.com/question/29065045
#SPJ1
Factor completely.
7b^2-63
Thank you :DDD
Since both terms are perfect squares, factor using the difference of squares formula, [tex]a^2-b^2=(a+b)(a-b)[/tex] where [tex]a=b[/tex] and [tex]b=3[/tex]
Answer:[tex]7(b+3)(b-3)[/tex]Round the answer to the nearest hundredth
Using trigonometric functions, the value of the side AC = 2.85 units.
What are trigonometric functions?The right triangle's angle serves as the domain input value for the six fundamental trigonometric operations, and the output is a range of numbers.
The angle, given in degrees or radians, is the domain of the trigonometric function, sometimes referred to as the "trig function," of f(x) = sin, and the range is [-1, 1]. The other functions have a similar domain and scope. Trigonometric functions are widely used in algebra, geometry, and calculus.
Now in the given figure,
The angle is a right-angled triangle.
Now as per the trigonometric functions,
Sin 35° = AC/AB
⇒ 0.57 = x/5
⇒ x = 0.57 × 5
= 2.85.
The length of the opposite side AC is 2.85 units.
To know more about trigonometric functions, visit:
https://brainly.com/question/14746686
#SPJ1
Luke bought 4 kilograms of apples and 0.29 kilograms of oranges. How much fruit did he buy
in all?
He bought 4.29 Kilos of fruit.
4+0.29=4.29
Luke bought 4.29 kilograms of fruit in all
Step-by-step explanation:
Simple addition will be used to find the total fruit Luke bought.
Given
Amount of apples he bought = 4 kilograms
Amount of oranges he bought = 0.29 kilograms
so the total fruit will be:
[tex]\text{total fruit}=\text{Apples}+\text{oranges}[/tex]
[tex]=4+0.29[/tex]
[tex]=4.29[/tex]
So,
Luke bought 4.29 kilograms of fruit in all
Keywords: Measurement, addition
Learn more about addition at:
https://brainly.com/question/568799https://brainly.com/question/567922#LearnwithBrainly
20x50x30x50 = ?
Please answer someone!!
Answer: 1500000
Step-by-step explanation:
use a calculator
Answer:
1,500,000
Step-by-step explanation:
Breaking it up into an easier problem:
20x50 = 1,000
30x50=1,500
1,000 x 1,500, aka "adding three zeros" to the end of 1,500, as 1,000 is simply 1 x 10 x 10 x 10, and each 10 has one 0 to it.
Thus, the answer is 1,500,000
HELP PLS ILL GIVE U POINTS
Answer:
i think 16 im not sure
Step-by-step explanation:
cala used 4 2/3 cups of watermelon and 2 1/6 cups of cherries to make a fruit bowl how many cups of watermelon and cherries were used in all
Answer:
6 5/6 cups
Step-by-step explanation:
Add.
4 2/3 = 4 4/6
4 4/6 + 2 1/6 gives 6 5/6 cups were used in all.
Hope this helps!
How to graph it on a coordinate plan to the right 5x-3y=18
Tο shift the graph tο the right, we can simply add a pοsitive cοnstant tο the x values οf each pοint befοre plοtting them. Fοr example, if we want tο shift the graph tο the right by 2 units.
What is cοοrdinate plan?The intersectiοn οf twο number lines creates a twο-dimensiοnal plane knοwn as a cοοrdinate plane. The x-axis, a hοrizοntal number line, and the y-axis, a vertical number line, are twο examples οf these number lines.
Tο graph the equatiοn 5x - 3y = 18 οn a cοοrdinate plane, we can fοllοw these steps:
1. Sοlve fοr y in terms οf x:
5x - 3y = 18
-3y = -5x + 18
y = (5/3)x - 6
2. Chοοse sοme values fοr x and use the equatiοn tο find the cοrrespοnding y values. Fοr example, we can chοοse x = 0, 3, and 6:
When x = 0: y = (5/3)(0) - 6 = -6
When x = 3: y = (5/3)(3) - 6 = -3
When x = 6: y = (5/3)(6) - 6 = 2
3. Plοt the pοints (0, -6), (3, -3), and (6, 2) οn the cοοrdinate plane.
4. Draw a straight line passing thrοugh these three pοints. This line represents the graph οf the equatiοn 5x - 3y = 18.
To know more about coordinate plan visit,
https://brainly.com/question/27481419
#SPJ1
Let n be a positive integer. If a == (3^{2n}+4)^-1 mod(9), what is the remainder when a is divided by 9?
Let n be a positive integer. We can use the properties of modular arithmetic to calculate this remainder. Let's start with a = (32n + 4)-1 mod 9. We can rewrite this as a = 9 - (32n + 4)-1 because 9 = 0 mod 9.
We can use Fermat's Little Theorem to calculate (32n + 4)-1. This theorem states that (32n + 4)-1 mod 9 = (32n + 4)8 mod 9.
Using the identity (a + b)n mod m = ((a mod m) + (b mod m))n mod m, we can simplify the equation to (32n mod 9 + 4 mod 9)8 mod 9.
32n mod 9 = 0, so (32n mod 9 + 4 mod 9)8 mod 9 = 48 mod 9 = 1.
Finally, a = 9 - 1 = 8 mod 9, so the remainder when a is divided by 9 is 8.
Learn more about positive integer:
https://brainly.com/question/16952898
#SPJ11
how to calculate the product of two random variable that follows normal distribution with mean 0 and variance 1
The product of two random variables that follows the normal distribution with mean 0 and variance 1 is expected 0.
To compute the product of two random variables that are normal distributed with a mean of 0 and a variance of 1, the following procedure can be employed:
Since the mean of the normal distribution is 0 and the variance is 1, we can assume that the standard deviation is also 1.Thus, we can write the probability density function of the normal distribution as:
f(x) = (1/√2π) * e^(-x^2/2)
Using the definition of expected value, we can write the expected value of a random variable X as:E[X] = ∫x * f(x) dx, where the integral is taken over the entire range of X.
Similarly, we can write the expected value of a random variable Y as:E[Y] = ∫y * f(y) dy, where the integral is taken over the entire range of Y.
Since the two random variables are independent, the expected value of their product is the product of their expected values. Thus, we can write:E[XY] = E[X] * E[Y]
Substituting the probability density function of the normal distribution into the expected value formula, we can write:E[X] = ∫x * f(x) dx = ∫x * (1/√2π) * e^(-x^2/2) dx = 0
E[Y] = ∫y * f(y) dy = ∫y * (1/√2π) * e^(-y^2/2) dy = 0
Thus, the expected value of the product of two random variables that follow a normal distribution with mean 0 and variance 1 is:E[XY] = E[X] * E[Y]
= 0 * 0 ⇒ 0
Therefore, the product of two random variables that follow a normal distribution with mean 0 and variance 1 has an expected value of 0.
To know more about the "normal distribution": https://brainly.com/question/4079902
#SPJ11
Question
Find the value of y
for the given value of x
.
y=x+5;x=3
Answer: y is equal to 8
Step-by-step explanation:
by substituting the x for its vale of three we can add the two values to get 8 or y=8
I need help with these 2 please
Question 7. C (rectangular pyramid)
Question 8. 17 cm
Answer:
Question 7:C rectangular pyramid
Question 8: C 120 in
A=2(wl+hl+hw)=2·(10·2+5·2+5·10)=160
Step-by-step explanation:
The graph shows the velocity, v metres per second, of a car at time t seconds. Work out an estimate for the distance the car travelled for the first 8 seconds. Use 4 strips of equal width. -1-500- -1000- -500 0 V t
please help!!!
To estimate the distance traveled we need to find the area under the velocity-time graph from 0 to 8 seconds So,The estimate for the distance the car traveled for the first 8 seconds is 4000 meters.
Define velocity-time graph?A velocity-time graph is a graphical representation that shows the velocity of an object on the y-axis and time on the x-axis. It is used to depict the change in velocity over time and can provide information about the acceleration or deceleration of an object.
The height of each strip can be estimated by taking the average of the velocities at the beginning and end of the strip.
Using the trapezium rule, the estimated area of each strip is:
Strip 1: 0.5 x (0 + 2) x (0 + (-500)) = -500 m/s
Strip 2: 0.5 x (2 + 4) x (-500 + (-1000)) = -1500 m/s
Strip 3: 0.5 x (4 + 6) x (-1000 + (-500)) = -1500 m/s
Strip 4: 0.5 x (6 + 8) x (-500 + 0) = -500 m/s
The total estimated area is the sum of the areas of the 4 strips:
Total estimated area = -500 + (-1500) + (-1500) + (-500) = -4000 m/s
Since the area represents the distance traveled by the car, we can take the absolute value of the area to get the estimated distance traveled:
Estimated distance traveled is = |-4000| = 4000 meters
To know more about areas visit:
https://brainly.com/question/18066837
#SPJ1
Weight: 20kg Order: 10 mg q6 hours Therapeutic range : 2-3 mg/kg/day. What is daily dose? Is it safe? Is it therapeutic?
The daily dose is 40mg, this dose per kilogram per day is within the therapeutic range of 2-3mg/kg/day, which means that the medication is within the safe and effective range for this patient's weight.
The weight of the patient is 20kg, and the prescribed dosage is 10mg every 6 hours. To calculate the daily dose, we need to multiply the prescribed dosage by the number of doses per day. Since the medication is prescribed every 6 hours, this means that the patient will take it 4 times a day.
=> (10mg x 4 doses) = 40 mg
The therapeutic range is the range of doses at which the medication is most effective and safe. In this case, the therapeutic range is 2-3mg/kg/day. To determine if the daily dose is within the therapeutic range, we need to divide the daily dose (40mg) by the patient's weight (20kg) to get the dose per kilogram per day, which is 2mg/kg/day.
However, it's important to note that the therapeutic range is a general guideline and may vary depending on the patient's individual circumstances and medical history.
To know more about therapeutic here
https://brainly.com/question/14598348
#SPJ4
PLEASE HELP WILL GIVE BRAINLIEST.
Given f(x)=sin x and g(x)=cos x show that f(g(pi/2))=0. Show all your steps.
Answer:
Step-by-step explanation:
xs nxqxm,nswjnej,cebxhjme2ckjwadbcweckslnvc
First, we need to find the value of g(pi/2):
g(pi/2) = cos(pi/2) = 0
Now we can substitute this value into f(x):
f(g(pi/2)) = f(0) = sin(0) = 0
Therefore, f(g(pi/2)) = 0.
What are the zeros of the function? Set the function = 0, factor, and use the zero-product property. Show your steps!
f(x) = x² + 7x – 60
(100 POINTS AND BRAINLIEST)
The zeroes of the function are -12 and 5.
What is meant by Zeros of the function?Zeros of a function are the values of the input variables that make the output of the function equal to zero. The zeros are the solutions of equation f(x) = 0.
According to the question:
To find the zeros of the function
f(x) = x² + 7x - 60, we must set f(x) equal to zero and solve for x.
So we start with the equation:
x² + 7x - 60 = 0
Next, we need to factor the left side of the equation. We are looking for two numbers that multiply to -60 and add to 7. After some trial and error, we find that the numbers are 12 and -5:
x² + 7x - 60 = (x + 12)(x - 5) = 0
Now we can apply the zero product property, which states that if the product of two factors is zero, then at least one of the factors must be zero. Therefore, we set each factor equal to zero and solve for x:
x + 12 = 0 or x - 5 = 0
Solving for x, we get:
x = -12 or x = 5
The zeros of the function f(x) = x² + 7x - 60 are therefore x = -12 and x = 5.
To know more about Zeros of the function visit:
brainly.com/question/16633170
#SPJ1
What is an equation for the quadratic function represented by the table shown?
Consider a square whose side-length is one unit. Select any five points from inside this square. Prove that at least two of these points are within squareroot 2/2 units of each other.
The given square with a side length of one unit is known to contain five points. One must prove that at least two of these points are within square root 2/2 units of each other.
According to the Pigeonhole principle, "if n items are put into m containers, with n > m, then at least one container must contain more than one item."In this context, the square is the container, and the points inside it are the objects. If more than four points are picked, the theorem is true, and two points are nearer to each other than the square root of 2/2 units.
Let's place four points on the square's four corners. The distance between any two of these points is the square root of two units since the square's side length is 1.
Let's add another point to the mix. That point is either inside the square or outside it. Without loss of generality, let us assume that the point is inside the square. It must then be within the perimeter outlined by joining the square's corners to the point that was not a corner already.
The perimeter of the square described above is a square with a side length of square root 2 units.
Since we have five points in the square, at least two of them must be in the same smaller square, due to the pigeonhole principle. Without loss of generality, let's assume that two of the points are in the upper-left square. As a result, any points within this square are within the square root 2 units of any of the other four points. Hence, at least two points of the five selected are within the square root of 2/2 units of each other.
To know more about the "pigeonhole principle": https://brainly.com/question/13982786
#SPJ11
find the area and circumference of the circle below.round your answers to the nearest hundredth
Answer:
Step-by-step explanation:
The area of given circle is 28.27 sq.m. The circumference of given circle is 18.85 m (rounded to the nearest hundredth).
Give a short note on Circumference?The circumference of a circle is the distance around the edge or boundary of the circle. It is also the perimeter of the circle. The circumference is calculated using the formula:
C = 2πr
where "C" is the circumference, "π" is a mathematical constant approximately equal to 3.14159, and "r" is the radius of the circle.
The circumference of a circle is proportional to its diameter, which is the distance across the circle passing through its center. Specifically, the circumference is equal to the diameter multiplied by π, or:
C = πd
where "d" is the diameter of the circle.
Given that the diameter of the circle is 6m.
We know that the radius (r) of the circle is half of the diameter (d), so:
r = d/2 = 6/2 = 3m
The area (A) of the circle is given by the formula:
A = πr²
Substituting the value of r, we get:
A = π(3)² = 9π ≈ 28.27 sq.m (rounded to the nearest hundredth)
The circumference (C) of the circle is given by the formula:
C = 2πr
Substituting the value of r, we get:
C = 2π(3) = 6π ≈ 18.85 m (rounded to the nearest hundredth)
To know more about area visit:
https://brainly.com/question/28642423
#SPJ1
The complete question is:
