Explanation:
Magnesium chloride = MgCl₂
aluminum nitrate= Al(NO₃)₃
ammonium sulfate=( NH₄)₂SO₄
Question 25 of 30
Several dyes were mixed together and dissolved in water. You need to
determine which dyes are in the solution, but not separate the entire mixture.
How can you separate out a small sample of the dyes for identification
purposes, but not separate the entire mixture?
A. By distilling the dyes
B. By filtering the dyes
C. By using oils to distill the dyes
D. By using chromatography
SUBMIT
We can separate out a small sample of the dyes for identification purposes, but not separate the entire mixture by using chromatography.
What is Chromatography?Chromatography is a technique of separation of mixtures of liquids according to the nature of those liquids.
To get the process started, the mixture is dissolved in a substance called the mobile phase, which carries it through a second substance called the stationary phase.
The different components of the mixture travel through the stationary phase at different speeds, causing them to separate from one another. The nature of the specific mobile and stationary phases determines which substances travel more quickly or slowly, and is how they are separated. These different travel times are termed retention time.
Therefore, We can separate out a small sample of the dyes for identification purposes, but not separate the entire mixture by using chromatography.
Learn more about chromatography here:
https://brainly.com/question/11960023
#SPJ7
What is the reducing agent in the redox reaction represented by the following cell notation?
Zn(s) ∣ Zn2+(aq) ∣∣ Ag+(aq) ∣ Ag(s)
To solve such this we must know the concept of redox reaction. Therefore, Zn is the reducing agent represented by the given cell notation
Zn(s) ∣ Zn2+(aq) ∣∣ Ag+(aq) ∣ Ag(s)
What is chemical reaction?Chemical reaction is a process in which two or more than two molecules collide in right orientation and energy to form a new chemical compound. The mass of the overall reaction should be conserved. There are so many types of chemical reaction reaction like combination reaction, double displacement reaction.
Redox reaction is a chemical reaction where oxidation and reduction takes place simultaneously. Oxidation is loss of electrons and reduction is gain of electrons. The electron transfer from oxidant to reductant. Zn is the reducing agent in the given reaction. The component that undergoes oxidation is known as a reducing agent.
Therefore, Zn is the reducing agent in the given reaction.
Learn more about the chemical reactions, here:
brainly.com/question/3461108
#SPJ5
What is the correct clases for this drugs
Compazine
heelp me please
and
Promethazine
Answer:
Compazine belongs to a class of drugs called Antiemetic Agents; Antipsychotics, Phenothiazine.
how we can separate sand and water with the help of evaporation.
Answer:
By filtering
Explanation:
Take one cup of mixture of sand and water , filter using a cotton cloth ,
Hello please I need help
The study of Environmental Science includes which of the following?
A.)human biology
B.)the relationship between the Earth and the moon
C.)interactions between humans and living and non-living things in the environment
D.)the study of organisms living in the ocean
Answer:
Hi, There! the Correct Answer is below!
C.)interactions between humans and living and non-living things in the environment
Explanation:
Environmental scientists study subjects like the understanding of earth processes, evaluating alternative energy systems, pollution control and mitigation, natural resource management, and the effects of global climate change. ... Environmental scientists bring a systems approach to the analysis of environmental problems.
____________________________________________________________
Have a wonderful Day :)
~Darkspirit~
Answer:
interactions between human and living and non living things in the environment
Oceanography does not include the study of which of the following topics?
A.the relationship between the Sun, Moon, and Earth
B.the relationship between the atmosphere, Earth, and the oceans
C.the Earth's oceans
D.the plants and animals that live in the oceans
Answer:
A. The relationship between the Sun,Moon,and Earth
Explanation:
calculate mass of MnO2 if 1 mole of KMnO4 completely burnt. 2KMnO4 -> K2MnO4+MnO2+O2
Answer: 80 grams
Explanation:
2KMnO4 -> K2MnO4+MnO2+O2
2 moles of KMnO4 would produce 1 mole of MnO2, so 1 mole of KMnO4 would produce 0.5 moles of MnO4. The molar mass of MnO4 is 160 g/mole. 1/2 mole of KMnO4 would therefore be (160 g/mole)*(0.5 moles) = 80 grams.
Which method is used to separate the following mixture (a) water + kerosene
Answer:
The separation of kerosene, oil, and water are immiscible liquids, so they can be separated funnel.
How many inches are in 4.5 miles?
6. Heat from the sun reaches to us by
(a) radiation
(b) conduction
(c) convection
(d) all of these
PS. the one who gets it correct will be followed by me and also be marked as the brainliest!
Answer:
radiation
....
.
.
.
.hi how r u
Is my answer correct
Answer:
Radiation
Explanation:
Heat from the sun reaches is by the process of radiation
why hydrogen has dual nature?
Answer:
Since hydrogen has a single electron in its valence shell, it exhibits dual nature. of the periodic table, or it can obtain one electron to complete its valency of two, such as halogens from Group 17. Since it only has one electron in its outer shell, hydrogen has a dual existence.
Explanation:
This means that, like a normal halogen, a hydrogen atom can easily gain an electron to form a complete outer shell, or lose an electron to form an alkali metal. Since it already has two electrons in its outer shell, hydrogen can be diatomic, rendering it unreactive.
What is the chemical formula for peracetic acid?
The chemical formula for peracetic acid is C2H4O3. This means that there are 2 atoms of carbon, 4 atoms of hydrogen, and 3 atoms of oxygen in a single molecule.
I think that the answer is C2H4O3.
* The 'emf generated by
a copper-constantan thermometer is 15 mv. If the cold junction is at a temperature of 20 degrees celcius.Calculate the temperature of the hot junction when sensitivity
of the thermocouple is 0.03mv/degree celcius
Thermometers are used to measure temperatures. The temperature of the hot junction of the thermocouple is [tex]520^oC[/tex]
Given that:
[tex]EMF = 15mv[/tex]
[tex]T_1 =20^oC[/tex] --- Temperature at cold junction
[tex]s = 0.03mv/^oC[/tex] ---- Sensitivity
The temperature [tex]T_2[/tex] at the hot junction is calculated as follows:
[tex]T_2 = \frac{EMF}{s} + T_1[/tex]
So, we have:
[tex]T_2 = \frac{15mv}{0.03mv/^oC} + 20^oC[/tex]
[tex]T_2 = \frac{15}{0.03/^oC} + 20^oC[/tex]
[tex]T_2 = \frac{15}{0.03}^oC + 20^oC[/tex]
[tex]T_2 = 500^oC + 20^oC[/tex]
[tex]T_2 = 520^oC[/tex]
Hence, the temperature of the hot junction of the thermocouple is [tex]520^oC[/tex]
Read more about thermometers at:
https://brainly.com/question/13271366
When a liquid is at its boiling point, the vapor pressure of the liquid
What is Displacement reaction . Explain with an example.
Explanation:
A displacement reaction is the one wherein the atom or a set of atoms is displaced by another atom in a molecule. For instance, when iron is added to a copper sulphate solution, it displaces the copper metal. A + B-C → A-C + B.
In a year an adult cow produces around 3.571 x 10^27 molecules of methane CH4 a greenhouse gas how many moles of methane does this cow produce in a year
Answer:
[tex]\boxed{\boxed {\sf 5930.0 \ mol \ CH_4}}[/tex]
Explanation:
We are asked to find how many moles of methane (CH₄) a cow produces in a year. We must convert molecules of methane to moles of methane. We will do this using Avogadro's Number or 6.022 × 10²³. This is the number of particles (atoms, molecules, formula units, etc.) in 1 mole of a substance.
In this case, the particles are molecules of methane. There are 6.022 × 10²³ molecules of methane in 1 mole.
We will convert molecules to moles using dimensional analysis. Set up a ratio using Avogadro's Number.
[tex]\frac {6.022 \times 10^{23} \ molecules \ CH_4}{ 1 \ mol \ CH_4}[/tex]
We are converting 3.571 × 10²⁷ molecules of methane to moles, so we multiply the ratio by this value.
[tex]3.571 \times 10^ {27} \ molecules \ CH_4 *\frac {6.022 \times 10^{23} \ molecules \ CH_4}{ 1 \ mol \ CH_4}[/tex]
Flip the ratio. It is still the same value, but the units of molecules of methane cancel.
[tex]3.571 \times 10^ {27} \ molecules \ CH_4 *\frac { 1 \ mol \ CH_4}{6.022 \times 10^{23} \ molecules \ CH_4}[/tex]
[tex]3.571 \times 10^ {27} *\frac { 1 \ mol \ CH_4}{6.022 \times 10^{23} }[/tex]
[tex]\frac {3.571 \times 10^ {27}}{6.022 \times 10^{23} } \ mol \ CH_4[/tex]
[tex]5929.923613 \ mol \ CH_4[/tex]
The original measurement of molecules of methane( 3.571 × 10²⁷ molecules) has 4 significant figures, so our answer must have the same. For the number we calculated, that is the ones place. The 9 in the tenth place tells us to round the 9 in the ones place up to a 0, then the 2 in the tens place up to a 3.
[tex]5930 \ mol \ CH_4[/tex]
We must add a placeholder zero in the tenth place to reach 4 sig figs.
[tex]5930.0 \ mol \ CH_4[/tex]
The adult cow produces approximately 5930.0 moles of methane in a year.
Am element has 18 electrons ,20 neutrons and a charge of -2.what is the mass number?..a.38 b.40 c.32 d.39
Answer:
Surely you must have a Periodic Table beside you....?
a=38
Explanation:
You gots Z=18, the atomic number, where Z is the number of nuclear protons. The number of protons defines the element....and thus we got calcium....
....and with 20 neutrons we got the 38Ca isotope....the which is rather short-lived...
Which of the following is a feature of a Type IV flotation device?
Answer:
A Type IV PFD is an approved device designed to be thrown to a person in the water. It is not designed to be worn. It is designed to have at least 16.5 pounds of buoyancy. The most com- mon Type IV PFD is a buoyant cushion.
The orbit of a planet is an ellipse with the sunat one of the foci.. This is Kepler's........ second law third law first law
Answer:
its keplers first law
Explanation:
answer from gauth math
Which property altered during a chemical change is not altered during a physical change?
A. composition of the matter
B. temperature of the matter
C. volume of the matter
D. phase of the matter
The property altered during a chemical change that is not altered during a physical change is composition of the matter.
A physical change is one in which no new substance is formed and it is easily reversible.
A chemical change is one that is not easily reversible and no new substance is formed. It may be accompanied by absorption or evolution of heat.
The composition of a substance changes during a chemical change because bonds between atoms break and new bonds are formed. This does not occur during a physical change.
Learn more; https://brainly.com/question/11946229
aluminum has a density of 2.70 g/mL. Calculate the mass (in grams) of a piece of aluminum having a volume of 344 mL
Answer:
[tex]\boxed {\boxed {\sf 928.8 \ grams}}[/tex]
Explanation:
Density is the mass per unit volume of a substance. The following formula is used for calculating density.
[tex]\rho= \frac{m}{v}[/tex]
We know the density of aluminum is 2.70 grams per milliliter. The mass is unknown, but we know the piece of aluminum has a volume of 344 milliliters.
ρ= 2.70 g/mL v= 344 mLSubstitute these values into the formula.
[tex]2.70 \ g/mL = \frac {m}{344 \ mL}[/tex]
We are solving for the mass, so we must isolate the variable m. It is being divided by 344 milliliters. The inverse operation of division is multiplication. Multiply both sides of the equation by 344 mL.
[tex]344 \ mL *2.70 \ g/mL = \frac {m}{344 \ mL} * 344 \ mL[/tex]
[tex]344 \ mL *2.70 \ g/mL =m[/tex]
The units of milliliters cancel.
[tex]344 *2.70 \ g=m[/tex]
[tex]928.8 \ g =m[/tex]
The mass of the piece of aluminum is 928.8 grams.
b. Use the balanced equation to answer the following questions.
CuSO4(aq) + 2NaOH(aq) —->Cu(OH)2(s) + Na2SO4(aq)
i. What is the ratio of moles of CuSO4 to moles of NaOH?
ii. If 638.44 g CuSO4 reacts with 240.0 NaOH, which is the limiting reagent?
iii. Using the limiting reagent to determine how many grams of Cu(OH)2 should precipitate out in the reaction.
iv. If only 174.6g of Cu(OH)2 precipitate were actually collected from the reaction, what would the percent yield be?
Answer:
i. 1 : 2
ii. NaOH is the limiting reagent
iii. 292.5g
iv. 59.69%
Explanation:
I have the detailed and self-explanatory workings. will snap and post later. Battery percent at 15%, flashlight not working.
1. The ratio of CuSO₄ to NaOH is 1 : 2
2. The limiting reactant is NaOH.
3. The mass of Cu(OH)₂ that will precipitate out is 292.5 g.
4. The percentage yield of Cu(OH)₂ is 59.7%
1. Determination of the ratio of CuSO₄ to NaOH.
CuSO₄ + 2NaOH —> Cu(OH)₂ + Na₂SO₄
From the balanced equation above, we can see that the ratio of CuSO₄ to NaOH is 1 : 2
2. Determination of the limiting reactant.
CuSO₄ + 2NaOH —> Cu(OH)₂ + Na₂SO₄
Molar mass of CuSO₄ = 63.5 + 32 + (16×4) = 159.5 g/mol
Mass of CuSO₄ from the balanced equation = 1 × 159.5 = 159.5 g
Molar mass of NaOH = 23 + 16 + 1 = 40 g/mol
Mass of NaOH from the balanced equation = 2 × 40 = 80 g
From the balanced equation above,
159.5 g of CuSO₄ reacted with 80 g of NaOH.
Therefore,
638.44 g of CuSO₄ will react with = (638.44 × 80) / 159.5 = 320.22 g of NaOH.
From the calculations made above, we can see that a higher mass (i.e 320.22 g) of NaOH than what was given (i.e 240 g) is needed to react completely with 638.44 g of CuSO₄.
Therefore, NaOH is the limiting reactant.
3. Determination of the mass of Cu(OH)₂ that will precipitate out.
CuSO₄ + 2NaOH —> Cu(OH)₂ + Na₂SO₄
Molar mass of Cu(OH)₂ = 63.5 + 2(16 + 1) = 97.5 g/mol
Mass of Cu(OH)₂ from the balanced equation = 1 × 97.5 = 97.5 g
From the balanced equation above,
80 g of NaOH reacted to produce 97.5 g of Cu(OH)₂.
Therefore,
240 g of NaOH will react to produce = (240 × 97.5) / 80 = 292.5 g of Cu(OH)₂
Thus, 292.5 g of Cu(OH)₂ precipitated out of the reaction.
4. Determination of the percentage yield.
Actual yield of Cu(OH)₂ = 174.6 gTheoretical yield of Cu(OH)₂ = 292.5 gPercentage yield of Cu(OH)₂ =?Percentage yield = (Actual /Theoretical) × 100
Percentage yield of Cu(OH)₂ = (174.6 / 292.5) × 100
Percentage yield of Cu(OH)₂ = 59.7%
Learn more about percentage yield:
https://brainly.com/question/11096315
draw the atomic structure of 10 elements and show Electronic configuration.......
Answer:
ज
Explanation:
ूअूिkzkzkksksosawwhsusisisisisisiisisisisisisiisisisis
Which of the following atoms is expected to have two unpaired electrons?
Al
Mg
Na
None of the above
Answer:
none of the above answers
Anyone to help me solve this question. Am going to give brainliest
who is th father of chemistry
How can the Swartz process be modified to work for bacteria? Explain.
Answer:
https://swartzbiotechnologylab.sites.stanford.edu/research
Explanation:
Alkyl chlorides and alkyl bromides are typically transformed into alkyl fluorides in the organic reaction known as the Swarts Reaction.
Swartz reaction?Frederick Jean Edmond Swarts first reported this procedure in 1892. Heating the alkyl chloride or alkyl bromide in the presence of heavy metal fluorides like AGF, Hg2F2, CoF2, or SbF3 causes this reaction.
Swartz process can be used to modify work for bacteria. Bacterial biofilms are collections of microorganisms where the cells are immersed in an extracellular polymeric matrix that the bacteria have self-produced.
In contrast to planktonic bacteria, which are in a state of free movement in a bulk solution, this situation is very different.
Applications:
In this process, alkyl fluorides are created.Fluorinated aliphatic organic molecules, or Freons, are produced via a different variation of the same process.Anhydrous hydrogen fluoride is fluorinated to produce Freons in the presence of antimony salts, which exhibit the oxidation states +3 and +5.Therefore, Alkyl chlorides and alkyl bromides are typically transformed into alkyl fluorides in the organic reaction known as the Swarts Reaction.
To learn more about the Swartz process, refer to the link:
https://brainly.com/question/10019079
#SPJ2
How many inches are in 1.00 km
PLEASE ANSWER ASAP NEED ANSWER!!!!!!!!!!!!!! 75 POINTS
Which statement about pure substances and molecules is correct?
A. Pure substances cannot be molecules.
B. All molecules are pure substances.
C. Molecules cannot be pure substances.
D. All pure substances are molecules.
Answer:
D. All pure substances are molecules.
The correct statement about pure substances is; "All molecules are pure substances."
A pure substance contains exactly the same type of atoms. In a molecule, there can only be a particular combination of atoms.
For instance, a molecule of HCl can only contain chlorine and hydrogen atoms.
This means that every molecules are also pure substances.
Learn more; https://brainly.com/question/19922822
