When you stand on tiptoes on a bathroom scale, there is an increase in

A) weight reading.
B) pressure on the scale, not registered as weight.
C) both weight and pressure on the scale.
D) none of the above

Answers

Answer 1

Answer:

B) Pressure on the scale, not registered as weight.

Explanation:

This is because energy (derived from weight) becomes compiled on the tips of your toes, and therefore does not increase your weight, but simply the pressure at a smaller point


Related Questions

TIME REMAINING
45:13
A framed picture hangs from two cords attached to the ceiling.

A picture of a picture frame hanging by two cables at the center of the frame at the same length and angle from the vertical.

Which shows the correct free body diagram of the hanging picture?

A free body diagram with two force vectors, the first pointing downward labeled F Subscript g Baseline, the second pointing upward labeled F Subscript N Baseline.

A free body diagram with three force vectors, the first pointing south labeled F Subscript p Baseline, the second pointing northeast labeled F Subscript T Baseline, and the third pointing northwest labeled F Subscript N.

A free body diagram with three force vectors, the first pointing south labeled F Subscript g Baseline, the second pointing northeast labeled F Subscript T Baseline and the third pointing northwest labeled F Subscript T.

A free body diagram with two force vectors, the first pointing downward labeled F Subscript p Baseline, the second pointing upward labeled F Subscript T Baseline.

Answers

Answer:The answer is C

Explanation:

Why does a compass give unreliable readings when used near electrical appliances

Answers

Answer:

Explanation:

Since the compass uses a magnetic field, if anything else magnetic is near it, the compass will start acting up. Making it unreliable so keep magnets away!

Why is the force of attraction between the Earth and ourselves so huge compared to the attraction between two apples?

Answers

Answer:

Answer in explanation

Explanation:

The force of attraction between two bodies is governed by Newton's Law of Gravitation:

[tex]F = \frac{Gm_1m_2}{r^2}[/tex]

where,

G = Universal Gravitational Constant

m₁ = mass of the first body

m₂ = mass of the second body

r = distance between the two bodies

F = Force

Hence, it is clear from the formula that the magnitude of the force is directly proportional to the product of the masses of the objects. So in the case of the earth and ourselves, the mass of the earth is very large in order of 10²⁴ kg. Due to this huge mass, the attraction between the earth and ourselves is so huge as compared to the attraction between two apples. Because the masses of the apple are very small in grams.

why is unit of power is called derived unit?​

Answers

Distance travelled by a body in unit time is called speed. it is a scalar quantity because it can be specified only by magnitude.

Three 15-Ω and two 25-Ω light bulbs and a 24 V battery are connected in a series circuit. What is the current that passes through each bulb?
1) 0.18 A
2) 0.25 A
3) 0.51 A
4) 0.74 A
5) The current will be 1.6 A in the 15-Ω bulbs and 0.96 A in the 25-Ω bulbs.

Answers

Answer:

I = 0.25 A

Explanation:

Given that,

Three 15 ohms and two 25 ohms light bulbs and a 24 V battery are connected in a series circuit.

In series combination, the equivalent resistance is given by :

[tex]R=R_1+R_2+R_3+....[/tex]

So,

[tex]R=15+15+15+25+25\\\\=95\ \Omega[/tex]

The current each resistor remains the same in series combination. It can be calculated using Ohm's law i.e.

V = IR

[tex]I=\dfrac{V}{R}\\\\I=\dfrac{24}{95}\\\\I=0.25\ A[/tex]

So, the current of 0.25 A passes through each bulb.

The density of blood is 1055 kg/m3 . If the blood at the very top of your head exerts a minimum gauge pressure of 45 mm Hg (6000 Pa), estimate the gauge pressure at your heart in pascals.

Answers

Answer:

   P = 10135.6 Pa

Explanation:

For this exercise we use that the pressure varies with the height

           P = P₀ + ρ g h

where h is the height from the head to the heart, which is approximately

h = 40 cm = 0.40m  and P₀ is the head pressure P₀ = 6000 Pa

          P = 6000 + 1055 9.8 0.40

          P = 6000 + 4135.6

          P = 10135.6 Pa

A 6.0-cm-diameter horizontal pipe gradually narrows to 4.0 cm. When water flows through this pipe at a certain rate, the gauge pressure in these two sections is 32.0 kPa and 24.0 kPa, respectively. What is the volume rate of flow?

Answers

Answer:

a n c

Explanation:

Express the unit of force in terms of fundamental unit​

Answers

Answer:

The fundamental unit of force is kg.m/s²

Explanation:

According to Newton's second law of motion, force is given as the product of mass and acceleration.

Mathematically, force can be expressed as; F = ma

where;

F is the force

M is mass of the object, unit of mass = kg

a is acceleration of the object, unit of acceleration = m/s²

Force = kg x m/s²

Force = kg.m/s²  = Newton [N]

Therefore, the fundamental unit of force is kg.m/s²

Question 2 of 10
Which of the following statements is true of an isolated system?
A.The system has energy but no matter.
B.Energy separates the matter in the system from outside matter.
C.The matter within the system does not interact with matter outside the system
D.The matter within the system does not interact with other matter in the system

Answers

Answer:

D

Explanation:

because it is system removed from system and it dosent interact with them

What is life like in a cave camp? Do you think you would like to experience this? Why or why not?

Answers

Answer:

There's no risk of animals or bad weather interfering with your campsite, either. You don't even really need a tent. A sleeping pad, sleeping bag and a mindful eye to pick up everything you brought in is all you really need to enjoy overnight caving. Do your research

Explanation:

A 55-kg block, starting from rest, is pushed a distance of 5.0 m across a floor by a horizontal force Fp whose magnitude is 140 N. Fp is parallel to the displacement of the block. The final speed of the block is 2.35 m/s.
a) How much work was converted to thermal energy? What work did friction do on the box?
b) What is the coefficient of friction?

Answers

Answer:

The answer is "151.25 J and -547.64 J".

Explanation:

[tex]u = 0\\\\v = 2.35\ \frac{m}{sec}\\\\d = 5.0 \ m\\\\[/tex]

Using formula:

[tex]v^2 = u^2 + 2 \times a \times d\\\\2.35^2 = 0^2 + 2 \times a \times 5\\\\a = \frac{2.35^2}{10} \\\\[/tex]

   [tex]= 0.55 \ \frac{m}{sec^2}\\\\[/tex]

[tex]F_{net} = m \times a\\\\F_{net} = 55 \times 0.55 = 30.25\ N\\\\[/tex]

Calculating the Work by net force

[tex]W = F_{net}\times d\\\\W = 30.25 \times 5 = 151.25 \ J\\\\[/tex]

The above work is converted into thermal energy.

Now,

[tex]F_{net} = F_p - F_f\\\\F_p = 140 \ N\\\\F_f = u_k\times m \times g = u_k \times 55 \times 9.81\\\\F_f = 539.55 \times u_k\\\\30.25 = 140 - u_k \times 55 \times 9.81\\\\u_k = \frac{(140 - 30.25)}{(55\times 9.81)}\\\\uk = 0.203 = \text{Coefficient of friction}\\\\W_f = -F_f \times d\\\\W_f = -0.203 \times 55 \times 9.81 \times 5\\\\Work\ done\ by\ friction = -547.64 \ J[/tex]

How do the magnitude and direction of the electric field on the left side of the dipole compare to the right side for the same distance

Answers

Answer:

The magnitude of the electric field is same while the direction at the left and at the right is opposite to each other.

Explanation:

The direction of the electric field due to the dipole on the axial line is same as  the direction of dipole moment.

The magnitude of the electric field due to an electric dipole on its axial line is

[tex]E=\frac{2kp}{r^3}[/tex]

where, k is the constant, p is the electric dipole moment and r is the distance from the center of dipole.

The magnitude of the electric field is same while the direction at the left and at the right is opposite to each other.  

Question: A NEO distance from the Sun is 1.17 AU. What is the speed of the NEO (round your answer to 2 decimal places)

Answers

Answer:

  v = 2.75 10⁴ m / s

Explanation:

For this exercise we must use Kepler's third law which is an application of Newton's second law to the solar system

            F = ma

where force is the force of gravity

            F = [tex]G \frac{m M}{r^2}[/tex]

acceleration is centripetal

             a = [tex]\frac{v^2}{r}[/tex]

we substitute

           G m M / r² = m v² / r

           [tex]\frac{GM}{r}[/tex] = v²

           v = [tex]\sqrt{GM/r}[/tex]

indicate that the radius of the orbit is r = 1.17 AU, let's reduce to the SI system

            r = 1.17 AU (1.496 10¹¹ m / 1 AI) = 1.76 10¹¹ m

let's calculate

         v = [tex]\sqrt{\frac{6.67 \ 10^{-11} 1.991 \ 10^{30} }{ 1.76 \ 10^{11}} }[/tex]Ra (6.67 10-11 1.991 10 30 / 1.76 10 11

         v = [tex]\sqrt{7.5454 \ 10^8 }[/tex]ra 7.5454 10 8

         v = 2.75 10⁴ m / s

The table below describes some features of methods used to generate electricity. Name method 4.

Answers

Answer:

Hydroelectricity

Explanation:

Because of flooding of water, we can assume that the electricity was generated by Water which is known as Hydroelectricity.

We can presume that the energy was produced by water because of the flooding of the water, which is a process known as hydroelectricity.

What is hydroelectricity?

Hydroelectric power, often known as hydropower, is the name given to electricity generated by turbines that turn the potential energy of falling or swiftly running water into mechanical energy. As of 2019, hydropower accounted for more than 18% of the world's total power generation capacity, giving it the most frequently used renewable power source in the early 21st century.

When water is used to produce energy, it is first gathered or stored at a higher altitude and then transported through extensive pipelines or tunnels (called pen stocks) to a lower level; the difference between these two altitudes is referred to as the head. The falling water triggers the rotation of turbines at the bottom of its descent through the pipes.

To know more about Hydroelectricity:

https://brainly.com/question/15228003

#SPJ2

Receptor elétrico 5 pontos Dispositivo que converte energia elétrica em outra forma de energia, não exclusivamente térmica. Exemplos: motores elétricos, ventiladores, liquidificadores, geladeiras, aparelhos de sons, vídeos, celulares, computadores?

Answers

Answer:

Electromechanical transducer and Electrical receiver.

Explanation:

Electromechanical transducer is the part of a communication system which converted electrical waves or electrical energy into sound waves. The most common example loudspeaker while on the other hand, Electrical receiver is a device that converts electrical energy into another form of energy, except thermal. Examples are cell phones, computers and television.

The total resistance of a parallel circuit is 25 ohms. If the total current is 100mA, how much current is through a 220 ohm resistor that makes up part of the parallel circuit?

Answers

Answer:

The current across the resistance is 0.011 A.

Explanation:

Total resistance, R = 25 ohms

Total current, I = 100 mA = 0.1 A

Let the voltage is V.

By the Ohm's law

V = I R

V = 0.1 x 25 = 2.5 V

Now the resistance is R' = 220 ohm

As they are in parallel so the voltage is same. Let the current is I'.

V = I' x R'

2.5 = I' x 220

I' = 0.011 A

Hi, so i have to find T1, can some1 help?

Answers

30.1 N

Explanation:

Given:

[tex]W_1 = 16\:\text{N}[/tex]

[tex]W_2 = 8\:\text{N}[/tex]

Let's write the components of the net forces at the intersections. Note that the system is equilibrium so all the net forces are zero.

Forces involving W1:

[tex]x:\:\:\:-T_1 + T_3\cos \alpha = 0\:\: \\ \text{or}\:\:T_2 = T_3\cos \alpha\:\:\:\:\:(1)[/tex]

[tex]y:\:\:\:T_3\sin \alpha - W_1 = 0\:\:\: \\ \text{or}\:\:\:T_3\sin \alpha = W_1\:\:\:\:\:\:(2)[/tex]

Forces involving W2:

[tex]x:\:\:\:T_1\sin 53 - T_3\sin \alpha = W_2\:\:\:\:\:\:\:(3)[/tex]

[tex]y:\:\:\:T_4 - T_1\cos 53 - T_3\cos \alpha = 0\:\:\:\;(4)[/tex]

Substitute (2) into (3) and we get

[tex]T_1\sin 53 - W_1 = W_2[/tex]

Solving for [tex]T_1[/tex],

[tex]T_1 = \dfrac{W_1 + W_2}{\sin 53} = 30.1\:\text{N}[/tex]

Magnetic field lines begin at the _?_ pole of a magnet and end at the _?_ pole

Answers

North Pole and South Pole

Wood is an example of
A. Metalloid
B. Insulator
C. Nonmetal
D. Conductor

Answers

The Answer is b: insulator

A dandelion seed floats to the ground in a mild wind with a resultant velocity of 26.0 cm/s. If the horizontal component velocity due to the wind is 10.0 cm/s, what is the vertical component velocity? Show all work.

Answers

Answer:

24 cm/s

Explanation:

Applying

Pythagoras theorem,

a² = b²+c²............. Equation 1

Where a = resultant, b = vertical component, c = horizontal component

From the question,

Given: a = 26 cm/s, c = 10 cm/s

Substitute these values into equation 1

26² = b²+10²

676 = b²+100

b² = 676-100

b² = 576

b = √576

b = 24 cm/s

A student measure the length of a laboratory bench with a meter ruler. Which of the following values is the most approbriate way to record the result ? a.4.022m b.4.02m c.4.0m d.4m​

Answers

Answer:

Well a meter stick has increments of a centimeter, and since 1 cm=0.01m he should record it as 4.02m(b)

Explanation:

A disk rotates about its central axis starting from rest and accelerates with constant angular acceleration. At one time it is rotating at 10 rev/s; 60 revolutions later, its angular speed is 15 rev/s. Calculate
(a) the angular acceleration,
(b) the time required to complete the 60 revolutions,
(c) the time required to reach the 10 rev/s angular speed, and
(d) the number of revolutions from rest until the time the disk reaches the 10 rev/s angular speed.

Answers

Explanation:

Given:

[tex]\omega_0[/tex] = 10 rev/s = [tex]20\pi\:\text{rad/s}[/tex]

[tex]\omega[/tex] = 15 rev/s = [tex]30\pi\:\text{rad/s}[/tex]

[tex]\theta[/tex] = 60 rev = [tex]120\pi\:\text{rads}[/tex]

a) the angular acceleration [tex]\alpha[/tex] is given by

[tex]\alpha = \dfrac{\omega^2 - \omega_0^2}{2\theta}[/tex]

[tex]\:\:\:\:\:\:\:=\dfrac{(30\pi)^2 - (20\pi)^2}{240\pi} = 6.5\:\text{rad/s}^2[/tex]

b) [tex]t = \dfrac{\omega - \omega_0}{\alpha} = \dfrac{30\pi - 20\pi}{6.5} = 4.8\:\text{s}[/tex]

c) [tex]t = \dfrac{\omega - \omega_0}{\alpha}[/tex]

[tex]=\dfrac{20\pi - 0}{6.5} = 9.7\:\text{s}[/tex]

d)[tex]\theta = \frac{1}{2}\alpha t^2[/tex]

[tex]\:\:\:\:\:\:\:=\frac{1}{2}(6.5\:\text{rad/s}^2)(9.7\:\text{s})^2 = 305.8\:\text{rad}[/tex]

[tex]\:\:\:\:\:\:\:= 48.7\:\text{revs}[/tex]

The mass per unit length of the rope is 0.0500 kg/m. Find the tension. Express your answer in newtons.

Answers

Complete question:

A transverse wave on a rope is given by [tex]y \ (x, \ t) = (0.75 \ cm) \ cos \ \pi[(0.400 \ cm^{-1}) x + (250 \ s^{-1})t][/tex]. The mass per unit length of the rope is 0.0500 kg/m. Find the tension. Express your answer in newtons.

Answer:

The tension on the rope is 1.95 N

Explanation:

The general equation of a progressive wave is given as;

[tex]y \ (x,t) = A \ cos(kx \ + \omega t)[/tex]

Compare the given equation with the general equation of wave, the following parameters will be deduced.

A = 0.75 cm

k = 0.400π cm⁻¹

ω = 250π s⁻¹

The frequency of the wave is calculated as;

ω = 2πf

2πf = 250π

2f = 250

f = 250/2

f = 125 Hz

The wavelength of the wave is calculated as;

[tex]\lambda = \frac{2\pi}{k} \\\\\lambda = \frac{2\pi }{0.4 \pi} = 5 \ cm = 0.05 \ m[/tex]

The velocity of the wave is calculated as;

v = fλ

v = 125 x 0.05

v = 6.25 m/s

The tension on the rope is calculated as;

[tex]v = \sqrt{\frac{T}{\mu}} \\\\where;\\\\T \ is \ the \ tension \ of \ the \ rope\\\\\mu \ is \ the \ mass \ per \ unit \ length = 0.05 \ kg/m\\\\v^2 = \frac{T}{\mu} \\\\T = v^2 \mu\\\\T = (6.25)^2\times (0.05)\\\\T = 1.95 \ N[/tex]

Therefore, the tension on the rope is 1.95 N

For waves moving through the atmosphere at a constant velocity, higher frequency waves must have proportionally longer wavelengths.
a) true
b) false

Answers

Answer:

false.

Explanation:

We know that for a wave that moves with velocity V, with a wavelength λ, and a frequency f, we have the relation:

V = λ*f

So, if the velocity is constant and we increase the frequency to:

f' > f

we will have a new wavelength λ'

Such that:

V = f'*λ'

And V = f*λ

Then we have:

f'*λ' = f*λ

Solvinf for λ', we get:

λ' =(f/f')*λ

And because:

f' > f

then:

(f/f') < 1

Then:

λ' =(f/f')*λ < λ

So, if we increase the frequency, we need to decrease the wavelength.

So, for higher frequency waves, we must have proportionally shorter wavelengths.

Then we can conclude that the given statement:

"or waves moving through the atmosphere at a constant velocity, higher frequency waves must have proportionally longer wavelengths"

is false.

A charged particle is injected into a uniform magnetic field such that its velocity vector is perpendicular to the magnetic field lines. Ignoring the particle's weight, the particle will

Answers

Answer:

The charged particle will follow a circular path.

Explanation:

Formula for the magnetic force is;

F = qvb sin θ

Where;

where;

q = the charge

v = the velocity

B = the magnetic field

θ = the angle between the velocity and magnetic field

We are told that velocity vector is perpendicular to the magnetic field lines. Thus, angle is 90.

So sin θ = sin 90 = 1

Thus,

F = qvB

Now, since the velocity vector is perpendicular to the magnetic field line,it also means from flemmings right hand rule, that the magnetic force is as well perpendicular to both of them.

Therefore, we have:

- a force that is always perpendicular to the velocity and as well constant in magnitude since magnitude of velocity or magnetic field does not change.

What this statement implies is that the force is acting as a centripetal force, and therefore, the charged particle will be kept in a uniform circular motion.

65. The weight of a body when totally immersed in a liquid is 4.2N if he weight of the liquid displaced is 2.5N. Find the weight of the body in air.​

Answers

Answer:

Given, Apparent weight(W₂)=4.2N

          Weight of liquid displaced (u)=2.5N

          Let weight of body in air = W₁

Solution,

             U=W₁-W₂

              W₁=4.2=2.5=6.7N

∴Weight of body in air is 6.7N

Two electrons are passing 20.0 mm apart. What is the electric repulsive force that they exert on each other

Answers

15.0 I’m pretty sure that’s the answer to your question

Answer:

0.5766422350752*10^-24 N

Explanation:

Couloumb's law states that states that there is an electrical force acting on 2 static charges. The magnitude is directly proportional to the product of the 2 charges.

Strength of electrons : q1 = q2 = 1.602 x 10-19. C

Substitute and solve:

F = (9*10^9)(1.602 x 10-19)(1.602 x 10-19) / (0.02)^2

Done.

Betelgeuse (in Orion) has a parallax of 0.00451 + 0.00080 arcsec,as measured by the Hipparcos satellite. What is the distance to Betelgeuse, and what is the uncertainty in that measurement?

Answers

Betelgeuse, the bright red star in the constellation of Orion the Hunter, is in the end stage of its stellar life. Astronomers have long thought it will someday explode to become a supernova. In late 2019 and early 2020, Betelgeuse generated a lot of

We have that  the distance to Betelgeuse, and the uncertainty in that measurement is

[tex]d=(221.7\pm39.33)pc[/tex]Uncertainty U = 0.00080

From the Question we are told that

Betelgeuse (in Orion)  has a parallax of 0.00451 + 0.00080

Generally

[tex]Distance\ in\ parsecs =\frac{ 1}{(parallax\ measured\ in\ arcseconds}[/tex]

Where

Parallax [tex]P =0.00451[/tex]

Uncertainty [tex]U = 0.00080[/tex]

Generally the equation for the distance  is mathematically given as

[tex]d=(\frac{1}{P}pc\pm(\frac{U}{P}*100\%))[/tex]

Therefore

[tex]d=(\frac{1}{0.00451}pc\pm(\frac{0.00080}{0.00451}*100\%))[/tex]

[tex]d=(221.7\pm39.33)pc[/tex]

For more information on this visit

https://brainly.com/question/12319416?referrer=searchResults

recognizing forms of energy

Answers

Answer:

hi the question isn't obvious and need a photo I guess

The question is missing

Suppose that a ball decelerates from 8.0 m/s to a stop as it rolls up a hill, losing 10% of its kinetic energy to friction. Determine how far vertically up the hill the ball reaches when it stops. Show your work.(2 points)

Answers

Answer:

The maximum height is 0.33 m.

Explanation:

initial velocity, u = 8 m/s

final velocity, v = 0 m/s

10% of  kinetic energy is lost in friction.

The kinetic energy used to move up the top,

KE = 10 % of 0.5 mv^2

KE = 0.1 x 0.5 x m x 8 x 8 = 3.2 m

Let the maximum height is h.

Use conservation of energy

KE at the bottom = PE at the top

3.2 m = m x 9.8 x h

h = 0.33 m  

The height traveled vertically up the hill by the ball when it stops is 0.327 meter.

Given the following data:

Velocity = 8.0 m/sKinetic energy = 10% lost to friction.

Scientific data:

Acceleration due to gravity = 9.8 [tex]m/s^2[/tex]

To determine how far (height) vertically up the hill the ball reaches when it stops:

By applying the law of conservation of energy, we have:

Kinetic energy lost at the bottom = Potential energy gained at the top.

Mathematically, the above expression is given by the formula:

[tex]0.1 \times \frac{1}{2} mv^2 = mgh\\\\0.1 \times \frac{1}{2} v^2 = gh\\\\h=\frac{0.1v^2}{2g}[/tex]

Substituting the given parameters into the formula, we have;

[tex]h=\frac{0.1 \times 8^2}{2\times 9.8} \\\\h=\frac{0.1 \times 64}{19.6} \\\\h=\frac{6.4}{19.6}[/tex]

Height, h = 0.327 meter.

Read more on kinetic energy here: https://brainly.com/question/17081653

Other Questions
how did early humans specifically use musical sounds and how was it passed on to the future societies? if U>T, R>Q, S>T and T>R, which of the following is TRUE? 1. S>Q 2. U > S 3.U > RA. 1 onlyB. 2 onlyC. 1 and 2D. 2 and 3 A 20 N south magnetic force pushes a charged particle traveling with a velocity of 4 m/s west through a 5 T magnetic field pointing downwards . What is the charge of the particle ? Which option is used in order to configure switchboards for a complex database?Switchboard ManagerGlobal OptionsQuick SearchDatabase Formatterworth 100 points opinion about thehelp provided for children ofNepal by plan Nepal. sodium chloride + water = ?which product will it form,and in which phase is it? The data table and the cladogram below provide information about the evolutionary history of several different species of animal. Using this information, which of the following is true of trout? They are more closely related to salamanders than they are to birds. They are more evolved than salamanders and lizards. They evolved into a separate species due to the presence of lungs. They have jaws and lungs but lack claws or nails, feathers, and mammary glands. The length of a rectangle is 5 cm more than the width and the perimeter is at least 61cm. What are the smallest possible dimensions for the rectangle? (Hint: Perimeter = 2L +2W) Explanation pleaseeee Read the Passage.A Complication or TwoHow does the author develop the idea that working at Tri-Valley Hospital was a good experience for the narrator?A) by telling the reader that things didn't go as plannedfor the narrator, but they turned out well in the endB) by showing that the narrator chose to become adoctor and work at the hospitalC) by sharing details about how the narrator met hiswife and how they built a life togetherD) by explaining to the reader why the narrator doesn'tbelieve that everything happens for a reason What was the name of the largest city in the Mississippian Empire?Cuzco Cahokia natchez Under which category of art would mosaics be placed? Painting media Drawing MediaPrintmaking processCraft Please help! This is due today and I dont know how to do this! Find 0.2B B=[50 10 25 15] The two bases of a trapezoid measure 14 inches and 10 inches respectively. The trapezoid's height is 8 inches. What is the area of the trapezoid? 192 square inches 1120 square inches 140 square inches 96 square inches I need help ASAP PLEASEEE! Pats Pizza Shack offers customers two choices of crust, three choices of sauce, and four choices of toppings shown below. If a 1-topping pizza is selected at random, what is the probability that it will be deep dish crust, with traditional sauce and green peppers? Which of the following controls the involuntary actions in the body Paul can install a 300-square-foot hardwood floor in 18 hours. Matt can install the same floor in 22 hours. How long would it take Paul and Matt to install the floor working together?4 hours9.9 hours13.2 hours30 hours Hideki had normal vision for most of his life, but now that he is in his 60s, he has started to have difficulty focusing on near objects. He went to an optometrist, who explained that his vision problem was the result of the lenses in his eyes losing elasticity due to aging. Which condition does Hideki have A variable is a letter that stands in for a number and unit... True or False?