Answer: Increase
Explanation:
When the economy enters a recessionary phase of the business cycle, unemployment tends to increase. This is because during a recession, businesses tend to reduce their production levels, leading to a decrease in demand for labor. As a result, companies may have to lay off workers or reduce their hours to cut costs. This can lead to higher unemployment rates in the economy.
problem 8-68 (lo 8-3) (algo) skip to question [the following information applies to the questions displayed below.] eva received $62,000 in compensation payments from jazz corporation during 2022. eva incurred $5,500 in business expenses relating to her work for jazz corporation jazz did not reimburse eva for any of these expenses. eva is single and deducts a standard deduction of $12,950. based on these facts, answer the following questions: use tax rate schedule for reference. note: leave no answer blank. enter zero if applicable. round your intermediate and final answers to the nearest whole dollar amount.
Given:Eva's compensation payments from Jazz Corporation in 2022 is $62,000. Eva's business expenses incurred while working for Jazz Corporation is $5,500. Therefore, the correct option is [D] $4,478.
Eva is single and claims a standard deduction of $12,950 .We need to determine the amount of the federal income tax liability that Eva will owe for the year 2022 based on the given facts. We will first calculate Eva's adjusted gross income (AGI) before calculating her federal income tax liability. Eva's AGI = compensation payments - business expenses - standard deduction= $62,000 - $5,500 - $12,950= $43,550. Next, we will determine the tax bracket in which Eva's AGI falls by using the tax rate schedule. Tax rate schedules provide marginal tax rates at different levels of taxable income. Using the 2022 tax rate schedule, we get: Taxable Income Marginal Tax Rate $0 - $10,275 10% $10,276 - $41,775 12% $41,776 - $89,075 22% $89,076 - $180,250 24% $180,251 - $320,450 32% $320,451 - $408,200 35% $408,201 or more 37%Since Eva's AGI of $43,550 falls within the second tax bracket, her federal income tax liability can be calculated as follows:Federal income tax liability = (Marginal tax rate × (Eva's AGI - Lower limit of the tax bracket)) + Base tax amount. Federal income tax liability = (12% × ($43,550 - $10,276)) + $1,059.00. Federal income tax liability = $4,478.08. Eva's federal income tax liability for the year 2022 is $4,478.
For more questions on business expenses
https://brainly.com/question/28809449
#SPJ11
Suppose that Ms. Spencer is currently exhausting her money income by purchasing 10 units of A and 8 units of B at prices of $2 and $4 respectively. The marginal utility of the last units of A and B are 16 and 24 respectively. These data suggest that Ms. Spencer:
a. has preferences that are at odds with the principle of diminishing marginal utility.
b. considers A and B to be complementary goods.
c. should buy less A and more B.
d. should buy less B and more
Ms. Spencer should buy less B and more B (Option c). This is because the marginal utility of A is higher (16) than that of B (24), suggesting that the additional benefit she receives from consuming the next unit of A is greater than the benefit she receives from consuming the next unit of B.
Marginal Utility is the extra utility you receive by consuming one additional unit of any commodity. Marginal utility, according to the principle of diminishing marginal utility, decreases as a person consumes more and more units of a good over time.
Income is defined as the amount of money that a person or household earns in exchange for their labor and services, as well as investments, profits, and other sources. Income is generally used to purchase products that are used to meet people's needs and want.
For more info about the topic Marginal Utility check the below link:
https://brainly.com/question/15050855
#SPJ11
which aspect of preparing an accounting worksheet typically requires the greatest involvement by the accountant?
Adjustments is an aspect of preparing an accounting worksheet typically requires the greatest involvement by the accountant. It is one of the most crucial task of an accountant.
Adjustments are accounting entries made at the end of the accounting period to adjust accounts for the effects of internal and external events that have not been recorded. They are necessary to ensure that the financial statements are accurate and complete.
Adjustments are classified into two types, namely accruals and deferrals. Accruals are revenues or expenses that have been earned or incurred but not yet recorded, while deferrals are revenues or expenses that have been recorded but not yet earned or incurred.
However, it is important to take the time to ensure that the financial statements are accurate, as errors or omissions can lead to serious consequences for the organization, such as legal problems or financial problems.
Know more about financial statements here:
https://brainly.com/question/14951563
#SPJ11
which of the following is a defense under strict products liability? question 37 options: rescission comparative responsibility contributory negligence comparative fault assumption of the risk
The defense under strict product liability is the assumption of the risk.
What is strict product liability?Strict product liability is a legal doctrine that holds manufacturers, distributors, and sellers liable for any injuries or damages caused by their defective products without requiring the plaintiff to prove negligence or fault on their part. It is an essential consumer protection tool that incentivizes manufacturers to make safe products by holding them accountable for any defects or hazards that they produce.
Strict product liability holds the seller of a product strictly liable for any damages or injuries caused by the product, regardless of the seller’s level of fault or negligence. The assumption of the risk defense states that the plaintiff was aware of the risks and chose to use the product anyways, thus releasing the seller from liability.
Learn more about the assumption of the risk here:
brainly.com/question/21897362
#SPJ11
the primary reason for a stock split is to: the primary reason for a stock split is to: distribute cash to the investor decrease the number of shares outstanding decrease the market value of the stock increase the contributed capital of the corporation
The primary reason for a stock split is to decrease the market value of the stock.
A stock split is a corporate action in which a company divides its existing shares into multiple shares to boost the liquidity of the shares. The company doesn’t actually gain or lose any value, but it can appear that the company has become more valuable because the price of the stock has decreased while the number of shares has increased.
This makes the stock more affordable to investors, which can attract more buyers and potentially drive the price up.
A stock split can also benefit the company by increasing the contributed capital, since more investors will be able to buy a stake in the company.
To know more about market value click on below link:
https://brainly.com/question/15148120#
#SPJ11
Which of the following may the president do to control the implementation of a policy agenda?
A The president can veto particular items or language in a bill he disagrees with while enacting the remainder of the bill
B The president can veto a congressional bill that has passed the House and the Senate
C The president can refuse to spend money that Congress appropriated
D The president can impeach selected members of Congress
Which of the following may the president do to control the implementation of a policy agenda?
A The president can veto particular items or language in a bill he disagrees with while enacting the remainder of the bill
B The president can veto a congressional bill that has passed the House and the Senate
C The president can refuse to spend money that Congress appropriated
D The president can impeach selected members of Congress
The president can refuse to spend money that Congress appropriated is what the president can do to control the implementation of a policy agenda. The correct option is C)
What can the president do to control the implementation of a policy agenda?The President of the United States can use a variety of methods to implement their policy agenda. One of the ways the president can control the implementation of a policy agenda is by refusing to spend the money that Congress has allocated.What is a policy agenda?The policy agenda is a collection of issues that the federal government is interested in addressing. These concerns are frequently used as the basis for future legislative action or executive branch directives. The policy agenda is a crucial tool for identifying the most pressing issues facing the country at any given moment.What is the role of the President of the United States in implementing a policy agenda?The President of the United States is responsible for implementing the policy agenda. The president has a variety of tools at his or her disposal for ensuring that policy priorities are pursued. The president can veto a bill, make executive orders, refuse to spend money, and utilize the power of persuasion to get people on board. The president can work with members of Congress to pass legislation and provide guidance and support to executive branch departments and agencies tasked with carrying out his or her policy priorities.
for more questions on Congress
https://brainly.com/question/325850
#SPJ11
which of the options below defines a non-excludable good? question 2 options: consumption by one person does not diminish the quantity of consumption by others. consumption by one person diminishes the quantity of consumption by others. it is difficult (or very costly) to prevent consumption by those who do not pay for the good. it is easy (or relatively costless) to prevent consumption by those who do not pay for the good.
In the following question, among the conditions given, A non-excludable goods is defined as a good that 'is difficult (or very costly) to prevent consumption by those who do not pay for the good."
What is a non-excludable good? A non-excludable good is defined as a good that is difficult (or very costly) to prevent consumption by those who do not pay for the good. This makes it difficult for suppliers to sell and market these kinds of products, which results in the government having to provide or subsidize them. Because it is difficult to stop people from using them, these goods often result in market failure. Types of Non-Excludable goodsThere are two types of non-excludable goods: Pure Non-Excludable Goods: These goods are the ones that everybody has access to, even if they do not pay for them. National parks and oceans are examples of such goods. Partly Non-Excludable Goods: These goods are ones that are non-excludable, but only to a certain degree. Cable TV and private clubs, for example, fall into this category. Even if you do not pay for them, you will be excluded to a certain extent, such as not having access to particular features.
For more such questions on goods
https://brainly.com/question/25922327
#SPJ11
A self-liquidating ________ is one in which the extra merchandise is offered at a savings over retail price but at a level that covers the cost of the item.
A self-liquidating promotion is one in which the extra merchandise is offered at a savings over retail price but at a level that covers the cost of the item.
What is a Self-Liquidating Premium?A self-liquidating premium is a type of sales promotion. A sales promotion is a marketing strategy that encourages people to buy a product or service. A self-liquidating promotion is a type of sales promotion that pays for itself.A self-liquidating premium is a free item given to customers when they buy something. The free item is a type of reward or incentive for making the purchase. The extra merchandise is offered at a savings over the retail price but at a level that covers the cost of the item.
What is the purpose of Self-Liquidating Premiums?The purpose of self-liquidating premiums is to generate sales. They are used to increase customer traffic and sales at retail stores. When customers see the extra merchandise, they are more likely to make a purchase. The free item is a type of reward for making the purchase.Self-liquidating premiums are used in many different industries. They are used in retail, food service, and entertainment. They are used to encourage people to buy food, drinks, and tickets. They are used to increase sales of clothing, electronics, and other products.
Learn more about sales promotion here: https://brainly.com/question/14772910
#SPJ11
a company uses the allowance method to estimate its bad debt expense. at the end of the year, the controller uses the aging-of-receivables method and estimates that $10,000 of accounts receivable will be uncollectible. with a debit balance of $2,000 in the allowance for bad debts account, what would be the correct entry to recognize bed debt expense?
The correct entry to recognize bed debt expense would be:
Bad Debt Expense $8,000 Allowance for Bad Debts$8,000Given, the following details of a company that uses the allowance method to estimate its bad debt expense: At the end of the year, the controller uses the aging-of-receivables method and estimates that $10,000 of accounts receivable will be uncollectible, and With a debit balance of $2,000 in the allowance for bad debts account. We are to find out the correct entry to recognize bed debt expense.
The aging method is a method used to estimate uncollectible accounts receivable by analyzing the receivables according to the age of each account. Thus, the Aging of Receivables Method estimates the portion of the current accounts receivable that will not be collected. The accounting entry to recognize bad debt expense is to debit Bad Debt Expense and credit Allowance for Doubtful Accounts.
The allowance method requires that an estimate of the expected losses from uncollectible accounts be made at the end of each accounting period. The estimated amount of losses is then charged to Bad Debt Expense and credited to Allowance for Doubtful Accounts. The following table shows the calculation of the required entry to recognize bed debt expense:
Accounts receivable that are 30 days past due$20,000×3%=$600
Accounts receivable that are 60 days past due$15,000×7%=$1,050
Accounts receivable that are 90 days past due$10,000×15%=$1,500
Accounts receivable that are 120 days past due$5,000×20%=$1,000
Total estimate of uncollectible accounts receivable$4,150
Less: Existing credit balance in Allowance for Bad Debts$(2,000)
Bad Debt Expense$2,150.
In other words, the amount of Bad Debt Expense should be $2,150, which is calculated as the total estimate of uncollectible accounts receivable ($4,150) less the existing credit balance in Allowance for Bad Debts ($2,000).Since the problem states that the controller estimates $10,000 of accounts receivable to be uncollectible, then the amount of the entry to recognize bad debt expense should be $10,000 − $2,000 = $8,000.
For more about bed debt expense:
https://brainly.com/question/14796598
#SPJ11
Which of the following is true about Maven?
- Maven is a project management and comprehension tool.
- Maven provides developers a complete build lifecycle framework.
- Both of the above.
- None of the above.
Maven is a project management and comprehension tool that provides developers a complete build lifecycle framework. Therefore, the correct option is "Both of the above.
"Maven: Maven is a project management and comprehension tool. Maven is built with Java, and it was created by Apache Software Foundation. Maven's key feature is the POM (Project Object Model). It's a metadata file for projects that specifies how they are constructed, their dependencies, and how they are to be constructed. Maven's central function is to construct projects by compiling source code, generating binary archives, and running unit tests, among other things.Maven provides developers a complete build lifecycle framework that includes project development, document creation, testing, and deployment. This framework includes a set of plug-ins that provide preconfigured scripts for different phases of the development lifecycle. The POM (Project Object Model) specifies the plug-ins to be used at each phase of the lifecycle.The correct option is "Both of the above." Maven is a project management and comprehension tool that provides developers with a complete build lifecycle framework.
Read more about management here:https://brainly.com/question/28072798
#SPJ11
Which of these is (are) most likely to increase productivity? A) higher corporate tax rates. B) increase in pop. C) investments in research and development.
What is productivity?
Productivity is the amount of production that can be generated from a certain amount of inputs. It is an assessment of efficiency in which a company transforms inputs into outputs.
What are Investments in research and development?
The money put into research and development (R&D) to enhance the goods and services a company provides is referred to as investments in research and development. R&D initiatives may lead to the creation of new goods or procedures that can make a company more profitable by allowing it to gain a larger market share, for example.
Investments in research and development can help a company improve its production process by increasing efficiency, reducing costs, and enhancing product quality. As a result, it can assist to increase productivity.
Option C, investments in research and development, is most likely to increase productivity.
Learn more about research and development (R&D) at https://brainly.com/question/29782299
#SPJ11
Branson Corp. purchased a new machine for its business. The following list shows the various expenditures for the machine during its first year: - Base purchase price,
$50,000
- Sales tax incurred at the time of purchase,
$3,000
- Installation charges for the machine,
$2,000
- Insurance costs incurred while the machine was being shipped,
$200
- Insurance costs for the first year of the machine's service life,
$500
- Ordinary repairs and maintenance costs during the first year of the machine's service life,
$1,200
Question: What should be the capitalized cost of the machine? Do not use symbols or cents in the numerical response. Answer:
$
The capitalized cost of the machine should be 56,900.
Capitalized cost is also called the historical cost of the asset. It is the actual cost of acquiring the asset along with all the necessary expenditures incurred to get the asset ready for use in the production process.
The different expenditures for the machine during its first year include:
The base purchase price, $50,000
Sales tax incurred at the time of purchase, $3,000
Installation charges for the machine, $2,000
Insurance costs incurred while the machine was being shipped, $200
Insurance costs for the first year of the machine's service life, $500
Ordinary repairs and maintenance costs during the first year of the machine's service life, $1,200
The capitalized cost of the machine will be the sum of all the expenditures,
$50,000 + $3,000 + $2,000 + $200 + $500 + $1,200 = $56,900
Thus, the capitalized cost of the machine is $56,900.
Learn more about capitalized cost here:
https://brainly.com/question/31066685
#SPJ11
true or false the operating plan focuses on how a business plans to meet the goals and objectives contained in the strategic plan.
True, the operating plan focuses on how the business plans to meet the goals and objectives contained in the strategic plan.
What is an operating plan? An operating plan is a business plan that specifies how to implement the strategies, initiatives, and activities described in the strategic plan. It is a tactical plan that outlines the specific actions, timelines, and resources required to accomplish the strategic goals and objectives. It serves as a guide for operational management by outlining how the company will meet its objectives through day-to-day operations.
As a result, it includes the specifics of the company's operations, such as hiring plans, production schedules, sales forecasts, and financial targets. The operating plan and the strategic plan are linked. The operating plan focuses on how a company will put the strategies outlined in the strategic plan into practice. It lays out the specific steps that will be taken to achieve the strategic plan's goals and objectives. They're both important in business planning because the strategic plan outlines what the company wants to accomplish, and the operating plan outlines how it will get there.
To learn more about the “operating plan” refer to the https://brainly.com/question/30319538
#SPJ11
15-a. What is the total cost to be accounted for? 15-b. What is the total cost accounted for? a. $ Total cost to be accounted for Total cost accounted for 357,915 357,915 b. $ Clopack Company manufactures one product that goes through one processing department called Mixing. All raw materials are introduced at the start of work in the Mixing Department. The company uses the weighted average method of process costing. Its Work in Process T-account for the Mixing Department for June follows (all forthcoming questions pertain to June): June 1 balance ? Materials Direct labor Overhead June 30 balance Work in Process-Mixing Department 28,000 Completed and transferred to Finished Goods 151,215 96,500 114,000 ? The June 1 work in process inventory consisted of 4,300 units with $15,240 in materials cost and $12,760 in conversion cost. The June 1 work in process inventory was 100% complete with respect to materials and 60% complete with respect to conversion. During June, 36,800 units were started into production. The June 30 work in process inventory consisted of 9,000 units that were 100% complete with respect to materials and 50% complete with respect to conversion.
The total cost to be accounted for is $357,915 and the total cost accounted for is also $357,915.
The June 1 work-in-process inventory consists of 4,300 units with $15,240 in materials cost and $12,760 in conversion cost, making the total cost of the June 1 inventory $28,000 ($15,240 + $12,760).
During June, 36,800 units were started into production, costing a total of $151,215 ($114,000 for overhead + $37,215 for materials + $0 for direct labor).
The June 30 work-in-process inventory consists of 9,000 units with $18,000 in materials cost and $9,000 in conversion cost, making the total cost of the June 30 inventory $27,000 ($18,000 + $9,000).
Adding together the June 1 and June 30 Work in Process inventory totals gives us the total cost to be accounted for, which is
$357,915 ($28,000 + $151,215 + $27,000 = $357,915).
Since the Completed and Transferred to Finished Goods was the same as the total cost to be accounted for, the total cost accounted for is also $357,915.
To learn more about “total cost” refer to the https://brainly.com/question/25109150
#SPJ11
To decrease the costs of operating a lock in a large river, a new system of operation is proposed. The system will cost $830,000 to design and build. It is estimated that it will have to be reworked every 10 years at a cost of $120,000. In addition, an expenditure of $80,000 will have to be made at the end of the fifth year for a new type of gear that will not be available until then. Annual operating costs are expected to be $70,000 for the first 15 years and $100,000 a year thereafter. Compute the capitalized cost of perpetual service at i=7%.
The capitalized cost of perpetual service is $4,201,394.23 at i=7%.
To compute the capitalized cost of perpetual service, we need to find the present value of all future costs associated with the system.
Step 1: Calculate the present value of the initial cost of designing and building the system:
PV of initial cost = $830,000
Step 2: Calculate the present value of the recurring maintenance costs:
PV of recurring maintenance costs = $120,000 / 0.07 = $1,714,285.71
Step 3: Calculate the present value of the gear replacement cost at the end of the fifth year:
PV of gear replacement cost = $80,000 / 1.07^5 = $58,099.47
Step 4: Calculate the present value of the annual operating costs for the first 15 years:
PV of annual operating costs for first 15 years = $70,000 x [(1 - (1 / 1.07^15)) / 0.07] = $579,963.94
Step 5: Calculate the present value of the annual operating costs after the first 15 years:
PV of annual operating costs after 15 years = $100,000 / (0.07 - 0.03) / 1.07^15 = $1,019,045.11
Step 6: Add up all the present values to find the capitalized cost of perpetual service:
Capitalized cost of perpetual service = PV of initial cost + PV of recurring maintenance costs + PV of gear replacement cost + PV of annual operating costs for first 15 years + PV of annual operating costs after 15 years
= $830,000 + $1,714,285.71 + $58,099.47 + $579,963.94 + $1,019,045.11
= $4,201,394.23
Therefore, the capitalized cost of perpetual service is $4,201,394.23 at i=7%.
To know more about perpetual service, viist:
https://brainly.com/question/15062534
#SPJ1
determine the ror for a project that has an initial cost of $82,000 and would provide positive cash flows of $12,000 the first year, $14,000 the second year, $16,000 the third year, $18,000 the fourth year, $20,000 the fifth year, and $22,000 the sixth year.
The IRR of the project is 17.6% for the rate of return (ROR) of a project that has an initial cost of $82,000 and would provide positive cash flows of $12,000 the first year, $14,000 the second year, $16,000 the third year, $18,000 the fourth year, $20,000 the fifth year, and $22,000 the sixth year.
By using the formula for calculating Internal Rate of Return (IRR).
IRR is the discount rate that makes the net present value (NPV) of all cash flows from a particular project equal to zero.
The formula for calculating IRR is:
[tex]IRR = R + [(FV / PV) * (1 + R) ^ n - 1] / [(1 + R) ^ n - 1][/tex]
Where:
In this case, we have an initial cost of $82,000, which is the present value (PV).
The future value (FV) is the sum of all the cash flows,
which is $82,000 + $12,000 + $14,000 + $16,000 + $18,000 + $20,000 + $22,000 = $144,000.
And the number of periods (n) is 6.
[tex]IRR = R + [(144,000 / 82,000) * (1 + R) ^ 6 - 1] / [(1 + R) ^ 6 - 1][/tex]
IRR=17.6
To learn more about IRR here:
https://brainly.com/question/7920964#
#SPJ11
Consider an MNC that uses market-based forecasting to estimate future exchange rates. Note: Asdume e represents the percentage change in the value of currency of interest. If an MNC uses the current spot rate of a currency as its forecast for the future spot rate of that currency, then it must assume that E(es) > 0. O False O True
Forecasting exchange rates is hence essential for firms that are involved in international transactions or have exposure to foreign exchange rate movements. The correct option is True
Consider an MNC that uses market-based forecasting to estimate future exchange rates. If an MNC uses the current spot rate of a currency as its forecast for the future spot rate of that currency, then it must assume that E(es) > 0, hence it is true. Also, in currency trading, it is essential to understand the currency's basic nature that is being traded.
Currency markets are the largest financial markets in the world, with trading volumes of more than $5 trillion per day. A currency is a method of payment that is utilized for the exchange of goods and services between two parties in diverse regions or countries.
It is significant to comprehend the exchange rates' movement for the currency, which is impacted by the currency's fundamentals (economic and political), global events, and the demand and supply of the currency. Forecasting exchange rates is hence essential for firms that are involved in international transactions or have exposure to foreign exchange rate movements.
The correct option is true.
Learn more about forecasting here:-
https://brainly.com/question/21445581
#SPJ11
strong property rights are important for modern economic growth because group of answer choices business cycle fluctuations will be smaller and less likely to disrupt investment patterns. they ensure an equitable distribution of income. people are more likely to invest if they don't fear that others can take their returns on investment without compensation they allow governments to extract the gains from private citizens' investments
Strong property rights are important for modern economic growth because people are more likely to invest if they don't fear that others can take their returns on investment without compensation.
What are property rights?Property rights refer to the ownership and control of an economic resource. Ownership provides the right to use the resource as you see fit, while control refers to the right to receive income from the resource. Property rights, in essence, allow for the creation of wealth and incentivize individuals and businesses to use and develop their resources fully.
What is economic growth?Economic growth refers to the increase in the amount of goods and services produced by a country or region over a given period. It is measured by the increase in real GDP, employment, and investment in physical and human capital.The importance of strong property rights for modern economic Growth
Strong property rights are critical to modern economic growth for several reasons.
Learn more about property rights at
https://brainly.com/question/29613081
#SPJ11
The amount a person would have to deposit today to be able to take out $600 a year for 7 years from an account earning 6 percent. (Round time value factor to 3 decimal places and final answer to 2 decimal places.)
The amount that needs to be deposited today to be able to withdraw $600 a year for 7 years at an annual interest rate of 6% is $3,349.43.
We can use the present value formula to calculate the amount that needs to be deposited today to be able to withdraw $600 a year for 7 years at an annual interest rate of 6%:
PV = PMT x (1 - (1 + r)⁻ⁿ) / r
where PV is the present value, PMT is the annual payment, r is the annual interest rate, and n is the number of years.
Substituting the given values, we get:
PV = $600 x (1 - (1 + 0.06)⁻⁷) / 0.06
PV = $3,349.43
Hence, the person needs to deposit $3,349.43
Learn more about present value here:
https://brainly.com/question/20557642
#SPJ11
Chang, the founder of a multinational corporation, believes that his business should mainly focus on the benefit of those people who own its stock. In this scenario, he most likely follows _______, a model of business management.
a. Stakeholders model
b. Shareholders primacy
c. Customer value
Option B). The model of business management that Chang is most likely following if he believes that his business should mainly focus on the benefit of those people who own its stock is "Shareholder primacy."
What is Shareholder Primacy?b The shareholder primacy model of business management is a management model that emphasizes the interests of shareholders over the interests of other stakeholders, such as employees, customers, and the general public, who are seen as secondary. The goal of a company following this model is to maximize shareholder wealth, which is accomplished by maximizing profits, increasing share prices, and paying dividends to shareholders. Why Shareholder Primacy is important? Shareholder primacy can be beneficial in some circumstances, such as when shareholders are actively involved in the business and have a long-term perspective. However, it can be detrimental in other circumstances, such as when shareholders prioritize short-term profits over long-term growth or when they engage in unethical or illegal activities to boost share prices. Therefore, the shareholder primacy model of business management has been the subject of debate in recent years, with some arguing that it needs to be revised to better balance the interests of all stakeholders.
For more such questions on Shareholders
https://brainly.com/question/28452798
#SPJ11
Chang's belief that his business should mainly focus on the benefit of those people who own its stock suggests he follows the Shareholders Primacy model of business management.
This model assumes that the primary purpose of a business is to increase shareholder wealth, and all decisions should be based on this goal. This model encourages businesses to maximize profits, often by cutting costs and increasing efficiency, while maintaining a focus on long-term growth and sustainability.
It also encourages businesses to have a more disciplined approach to capital allocation, using resources in a way that will generate the greatest return for shareholders.
This model seeks to ensure that the interests of shareholders are maintained and that their investments are managed in their best interests. As such, it typically involves strategies and tactics that focus on profit maximization, cost cutting, and increasing shareholder value.
Know more about Shareholders here
https://brainly.com/question/19162424#
#SPJ11
does having the largest reserve mean that the county will also be the largest supplier of this fossil fuel?
No, having the largest reserve doesn't always mean that the country will also be the largest supplier of fossil fuel.
The country needs to have proper technology and resources to extract and process fossil fuels to become the largest supplier.
Fossil fuel refers to any combustible organic substance formed from the remains of dead plants or animals. Coal, petroleum, and natural gas are examples of fossil fuels. Because of their high energy content, ease of transportation, and relative abundance, fossil fuels have become the world's most important source of energy. There are advantages and disadvantages to using fossil fuels as an energy source. A reserve is a mineral deposit that has been identified and analyzed but is not yet developed or extracted.In other words, it is a mineral deposit that has the potential to be developed and extracted profitably with existing technology and under current economic conditions.Reserves are also classified based on the amount of certainty surrounding their location, size, and quality. Reserves are important because they represent a future supply of essential minerals and fossil fuels.
the ledger of mai company includes the following accounts with normal balances as of december 31: retained earnings $10,700; dividends $1,650; services revenue $30,000; wages expense $16,900; and rent expense $5,000.
Prepare the necessary closing entries from the available information at December 31.
The necessary closing entries are as follows: Particulars Debit, Credit Income summary account $30,000 Services revenue $30,000 Wages expense $16,900 Rent expense $5,000 Income summary account $21,900 Income summary account $8,100 Retained earnings account $8,100 Dividends account $1,650 Retained earnings account $1,650
In order to prepare the necessary closing entries from the available information at December 31, we must follow certain steps which are as follows:
Step 1: Firstly, we need to transfer the balances of revenue accounts into the income summary account by making a debit entry in the income summary account equal to the total amount of revenue accounts and crediting the total amount of revenue accounts with individual accounts. Here, the revenue account is Services revenue.Particulars Debit Credit Income summary account $30,000 Services revenue $30,000
Step 2: Then, we need to transfer the balances of expense accounts into the income summary account by making a credit entry in the income summary account equal to the total amount of expense accounts and debiting the total amount of expense accounts with individual accounts. Here, the expense accounts are Wages expense and Rent expense.Particulars Debit Credit Wages expense $16,900 Rent expense $5,000 Income summary account $21,900
Step 3: Now, we need to transfer the net income/loss to the retained earnings account by making a credit entry in the income summary account and debiting the retained earnings account. Here, the income summary account has a credit balance of $8,100, which means that the company has net income of $8,100.Particulars Debit Credit Retained earnings account $8,100 Income summary account $8,100
Step 4: Then, we need to transfer the dividends account balance to the retained earnings account by making a debit entry in the retained earnings account and crediting the dividends account.Particulars Debit Credit Dividends account $1,650 Retained earnings account $1,650
For more questions on Dividends
https://brainly.com/question/3198926
#SPJ11
An entrepreneur decided to leave a job that pays $50,000 a year to start a business. These lost wages would be considered ______________ .Select the correct answer below:A. economic profitB. an explicit costC. an implicit costD. accounting profit
An entrepreneur decided to leave a job that pays $50,000 a year to start a business. These lost wages would be considered an implicit cost. The correct answer is option c.
Implicit costs are expenses that are not directly paid out of pocket. They are non-monetary expenses, such as lost time, missed opportunities, or foregone earnings, that are frequently ignored in accounting records or financial statements.
Lost wages are an example of an implicit cost. When entrepreneurs begin a business, they must devote time and effort to it, which means they must give up the opportunity to earn money elsewhere. When an entrepreneur invests in their own company, their wages are used to finance the company's operations rather than to pay themselves. Implicit costs, also known as opportunity costs, can be difficult to quantify since they are subjective and vary depending on the individual's perspective.
Learn more about Implicit costs here: https://brainly.com/question/7824689
#SPJ11
Creating a new product to increase margin is an example of using product implementations to achieve competitive advantage.True or false
By creating a new product, companies can increase their margins by offering a product that is differentiated from competitors. This allows them to charge a premium price and increase their margins. Thus, this statement is True.
A competitive advantage is a feature that enables a company to outperform its competitors. Competitive advantage enables a business to achieve superior performance or generate greater profits than its rivals, allowing it to develop more customers and gain a larger market share than its competitors.
When a business has a competitive advantage, it is in a more robust position to capture a larger market share than its competitors.
In this case, creating a new product to increase margin is an example of using product implementations to achieve a competitive advantage. One of the ways companies can gain a competitive advantage is by introducing new products into the market.
As a result, companies can use this method to introduce new products that will help them gain a competitive advantage over their rivals.
The introduction of a new product will assist the company in increasing its margin, which will enable it to outperform its rivals.
Learn more about margin here:
https://brainly.com/question/13248184
#SPJ11
the nature company manufactures cereal using only organic ingredients. to find out what the public wants in a cereal, the nature company uses mobile surveys because it can share photos, videos, and voice recordings with new and potential customers via smartphones. the advantage of mobile research shown in this example is .
The advantage of mobile research demonstrated in this example is the ability to collect rich and diverse data from a large and geographically dispersed sample of respondents.
How can this help Nature Company?By using mobile surveys, the Nature Company can easily engage with potential customers in a personalized and interactive manner, allowing them to share their opinions, preferences, and feedback in real-time.
Mobile surveys also enable the collection of multimedia content, such as photos, videos, and voice recordings, which can provide valuable insights into respondents' experiences and emotions.
Read more about mobile research here:
https://brainly.com/question/1695490
#SPJ1
is the degree to which decision-making authority is retained at higher managerial levels select one: a. centralization b. specialization c. unification d. formalization
Answer: The degree to which decision-making authority is retained at higher managerial levels is known as centralization. Centralization is the practice of retaining decision-making authority at higher managerial levels, as opposed to decentralization which is the practice of distributing decision-making authority across lower levels of an organization. The other terms in your question (specialization, unification, and formalization) are not related to this concept.
Explanation: The degree to which decision-making authority is retained at higher managerial levels is referred to as Centralization.
This process refers to the extent to which the decision-making power is vested with the top management, and the lower-level employees are not given much control over the decision-making process.
The centralization can be of various forms, and it depends on the size, structure, and the culture of an organization. The degree of centralization varies from organization to organization, and it depends on the nature of the decision being made.
Some of the factors that determine the extent of centralization in an organization are as follows:
Organization's culture and natureSize and nature of the decision-making processSize and nature of the organizationLevel of expertise of the employees involved in the decision-making processThe decision-making process should be designed in such a way that it involves both the top management and the lower-level employees. This process can lead to the success of the organization because it brings different perspectives to the decision-making process.
Learn more about decision-making authority here:
https://brainly.com/question/29665318
#SPJ11
Identify a true statement about closing techniques used in a major sale. Multiple Choice o Salespeople are advised to concentrate on closing orders rather than on developing relationships with customers. o A high-pressure close is necessary when the salesperson has done a good job throughout the process of obtaining commitment o Closing receives very little emphasis in sales training. o Reliance on closing techniques instead of engaging in identifying needs and providing solutions reduces the chances of making a sale. o An emphasis on getting the sale no matter what raises the possibility of getting a commitment.
A true statement about closing techniques used in a major sale is that: Reliance on closing techniques instead of engaging in identifying needs and providing solutions reduces the chances of making a sale.
What is closing?
The stage where a sales representative requests the client to make a commitment to buy and sign the deal is known as closing. A salesperson has done a good job of obtaining a commitment if they have created value for the customer, established a relationship of trust and respect, and uncovered the customer's needs and concerns. The method used to obtain the commitment is known as the closing technique.
Therefore, it is essential to emphasize identifying needs and offering solutions in a sales pitch rather than just relying on closing techniques to achieve the sale. It is suggested that salespeople concentrate on developing relationships with customers rather than just closing orders as relationships will bring more opportunities for future sales.
A high-pressure close is not necessary as it may turn the customer off, and closing receives great importance in sales training, especially in sales techniques.
Learn more about Commitment here:-
https://brainly.com/question/28291259
#SPJ11
Assume that on April 1, Sally promises to purchase Ben's house for $250,000 on May 1. Also on April 1, Ben makes a return promise to sell Sally the house on May 1 and provide her with legal title. Ben and Sally have created : a)An express and bilateral contractb) An express unilateral contractc)A unilateral implied contractd) void contract
The legal title that Sally and Ben have created in the scenario given in the question is an express and bilateral contract. Therefore, option A is correct.
An express and bilateral contract refers to a legal agreement between two or more parties in which both parties make promises to one another. It means that both parties have made express promises, and it is a legally binding document. It is a type of contract that requires each party to fulfill their obligations according to the terms of the agreement.In conclusion, Sally and Ben have created an express and bilateral contract. It is a legally binding document, and both parties are obligated to fulfill their promises according to the terms of the agreement. Hence, option a is correct.
Learn more about "Legal title"; https://brainly.com/question/29789795
#SPJ11
The Kingston County Basketball Conference (KCBC) is an amateur basketball association. Each city in the county has one team that represents it. Each team has a maximum of twelve players and a minimum of nine players. Each team also has up to three coaches (offensive, defensive, and PT coaches.) Each team plays two games (home and visitor) against each of the other teams during the season.
a. Draw the ER diagram.
b. Create a relational model based on the ER diagram.
A relational model is a way of representing data in a database using tables with rows and columns.
The ER diagram for the Kingston County Basketball Conference (KCBC) can be used to create a relational model. The model would have one table for each of the teams, with columns for the team name, the players, the three coaches, and the two games played (home and visitor). It would also have a table for each game, with columns for the team name, the players, the coaches, and the city of the game.
This model would allow for efficient retrieval of data related to KCBC teams, players, coaches, and games. It also allows for easy updating of data such as players and coaches, and for the tracking of game outcomes. By using a relational model, the KCBC can easily track and manage their data.
Know more about ER diagram here:-
https://brainly.com/question/30710118#
#SPJ11
What refers to training and empowering frontline workers to
The term that refers to training and empowering frontline workers to solve a problem immediately is "just-in-time" (JIT). Here option A is the correct answer.
JIT is a production strategy that emphasizes the importance of reducing waste, improving efficiency, and increasing productivity by providing the right resources at the right time. It aims to minimize inventory and work in progress by delivering the necessary inputs and resources exactly when and where they are needed.
In the context of problem-solving, JIT involves giving frontline workers the skills, knowledge, and tools to identify and address issues as they arise. This approach allows them to take quick action to solve problems before they escalate and become more costly to address. JIT training often includes the use of visual aids, checklists, and other tools to guide workers in identifying and resolving issues.
To learn more about just-in-time
https://brainly.com/question/30791354
#SPJ4
Complete question:
What refers to training and empowering frontline workers to solve a problem immediately?
a. just-in-time
b. poka-yoke
c. benchmarking
d. kaizen
