The correct answer is option C. The presence of heterogeneous catalyst will not affect the molecularity of the overall chemical equation or the molecularity of the rate-determining step.
What is a Heterogeneous catalyst?
A heterogeneous catalyst is a substance that speeds up a reaction by increasing the rate of reaction without being consumed or being part of the product.
The surface of a solid is a popular spot for such a catalyst.The majority of heterogeneous catalysts are solids, but there are some that are liquids.
The two types of catalysts are homogeneous and heterogeneous. Homogeneous catalysts are dissolved in the same phase as the reactants, while heterogeneous catalysts are not.
Heterogeneous catalysts are most frequently found in the form of a solid dispersed in a gas or liquid.
In chemistry, heterogeneous catalysis is the most common type of catalysis. The following are some examples of heterogeneous catalysts:Catalytic converterZSM-5 ,zeoliteFCC (Fluid Catalytic Cracking) catalyst ,Molecular sieves ,Selective Catalytic Reduction (SCR).
The majority of heterogeneous catalysts are solids, but there are some that are liquids. Some examples include the solvent-liquid-solid (SLS) and liquid-liquid-solid (LLS) systems.
Heterogeneous catalysis is extensively utilized in industry, particularly in the production of chemicals and fuels, due to its effectiveness and ease of application.
For more information about Heterogeneous catalyst refer here
https://brainly.com/question/1563647
#SPJ11
What mass of hydrogen will react with 84g of N2
For the best system, calculate the ratio of the masses of the buffer components required to make the buffer. Express your answer using two significant figures. NH3/NH4Cl ph=8.95
Answer : The ratio of the masses of NH3 to NH4Cl required to make the buffer is 1.6 x 10^4 : 1.
The buffer system is one of the most important chemical systems. They are usually composed of a weak acid and a salt of its conjugate base or a weak base and a salt of its conjugate acid. The buffer capacity is important as it helps to resist changes in pH. The Henderson-Hasselbalch equation can be used to calculate the pH of the buffer system.
It's given by: pH = pKa + log [A-] / [HA]Here, NH3 is the weak base and NH4Cl is the salt of its conjugate acid. NH3 + H2O <--> NH4+ + OH- NH4Cl <--> NH4+ + Cl-By combining the above equations, the ratio of the masses of NH3 and NH4Cl can be found as shown below. pH = pKb + log [salt] / [base] pH = 5.09 + log [NH4Cl] / [NH3]pH = 8.95, pKb of NH3 = 4.74Therefore, 8.95 = 4.74 + log [NH4Cl] / [NH3] 4.21 = log [NH4Cl] / [NH3] [NH4Cl] / [NH3] = antilog (4.21) [NH4Cl] / [NH3] = 1.6 x 10^4
Therefore, the ratio of the masses of NH3 to NH4Cl required to make the buffer is 1.6 x 10^4 : 1.
Know more about buffer system here:
https://brainly.com/question/22821585
#SPJ11
2. For each of the reactions below, write a structural reaction equation (which need not be balanced) by
drawing the structures of the reactant & product and name the product formed.
a) ethanol + K,Cr₂O, / H / reflux
b) ethanol + K₂Cr₂O, / H / distil
c) propan-1-ol + K,Cr₂O,/H. / reflux
d) propan-2-ol + K,Cr,O,/ H / reflux
e) 3-methylbutan-1-ol + K,Cr₂O, / H / reflux
f) 4-chloropentan-1-ol + K₂Cr₂O,/ H / distil
Answer:
a) Ethanol + K2Cr2O7 / H+ / Reflux → Acetaldehyde
CH3CH2OH + [O] → CH3CHO
b) Ethanol + K2Cr2O7 / H+ / Distil → Ethene
CH3CH2OH + [O] → CH2=CH2 + H2O
c) Propan-1-ol + K2Cr2O7 / H+ / Reflux → Propanal
CH3CH2CH2OH + [O] → CH3CH2CHO
d) Propan-2-ol + K2Cr2O7 / H+ / Reflux → Propanone (acetone)
(CH3)2CHOH + [O] → (CH3)2CO
e) 3-Methylbutan-1-ol + K2Cr2O7 / H+ / Reflux → 3-Methylbutanal
CH3CH(CH3)CH2CH2OH + [O] → CH3CH(CH3)CH2CHO
f) 4-Chloropentan-1-ol + K2Cr2O7 / H+ / Distil → 4-Chloropentanal
Cl(CH2)3CH2CH(OH)CH3 + [O] → Cl(CH2)3CH2CH=O + H2O
(please could you kindly mark my answer as brainliest)
write a list of rules for recognizing and naming binary molecular compounds from their chemical formulas
The following are the rules for recognizing and naming binary molecular compounds from their chemical formulas:
1. The first element in the chemical formula will be the name of the first element in the compound.
2. The second element in the chemical formula will be the name of the second element in the compound.
3. If the first element is a metal, the second element will end in “-ide”.
4. If the first element is a nonmetal, the second element will end in “-ate” or “-ite”.
5. The prefixes “mono-, di-, tri-, tetra-, penta-, and hexa-” are used to indicate the number of atoms of each element in the compound.
6. When the prefixes are not used, the number of atoms of each element is implied by the subscript.
7. If the subscript is written as a fraction, the fraction is changed to a whole number when forming the compound name.
Learn more about molecular compounds at brainly.com/question/30328923
#SPJ4
The rules for recognizing and naming binary molecular compounds are written focusing on the lower groups and the higher groups.
The rules for recognizing and naming binary molecular compounds from their chemical formulas are as follows:
1. The element with the lower group number is written first in the formula, and its full name is used.
2. The element with the higher group number is written second in the formula, and its stem name is used along with the suffix -ide.
3. The prefixes mono-, di-, tri-, tetra-, penta-, and so on are used to indicate the number of atoms present for each element in the molecule.
4. The prefix mono- is omitted for the first element in the formula.
5. The ending -a or -o in the prefix is omitted if the element name begins with a vowel, and only the vowel of the prefix is used in the compound name.
To learn more about compounds, click here:
https://brainly.com/question/26487468
#SPJ11
chromium metal has a binding energy of 7.21 x 10-19 j for certain electrons. what is the photon frequency needed to eject electrons with 2.2 x 10-19 j of energy?
To eject electrons with 2.2 x 10^-19 J of energy is 1.42 x 10^15 Hz.
what is the photon frequency needed? Chromium metal has a binding energy of 7.21 x 10^-19 J for certain electrons. So, the energy needed to eject the electrons is: Energy needed = Binding energy + Ejected electrons' energy = 7.21 x 10^-19 J + 2.2 x 10^-19 J = 9.41 x 10^-19 JNow, we know the energy needed to eject electrons is 9.41 x 10^-19 J. And we know that the energy of a photon is given by E = hν, where h is Planck's constant and ν is the frequency of the photon. To find the photon frequency needed, we can use the equation:
E = hνν = E/hν = (9.41 x 10^-19 J) / (6.63 x 10^-34 J·s)ν = 1.42 x 10^15 Hz
Hence, the photon frequency needed to eject electrons with 2.2 x 10^-19 J of energy is 1.42 x 10^15 Hz.
Learn more about photon frequency at brainly.com/question/30107923
#SPJ4
Whats the difference between zinc amino acid chelate with any other type of zincs?
Answer:
chelated zinc is more easily absorbed than zinc on it's own.
both the cno cycle and the proton-proton chain combine 4 h nuclei to produce 1 he nucleus. would those two processes release the same amount of energy per he nucleus produced? why or why not?
The CNO cycle and the proton-proton chain don't release the same amount of energy per He nucleus produced.
Let's understand this in detail:
1. The CNO cycle produces more energy than the proton-proton chain per He nucleus produced. The proton-proton chain and CNO cycle produce energy by nuclear fusion in the sun's core.
2. In the core of the Sun, the proton-proton chain occurs. It converts four hydrogen nuclei (protons) into one helium nucleus via a series of nuclear reactions. This reaction liberates a significant amount of energy through gamma rays and neutrinos.
3. The CNO cycle also takes four hydrogen nuclei, producing one helium nucleus. The key difference between these two processes is the method in which helium is produced.
4. In the proton-proton chain, two protons combine to form deuterium. This then combines with another proton to form helium-3, and two helium-3 nuclei combine to form helium-4.
5. In the CNO cycle, hydrogen is fused with carbon, nitrogen, and oxygen isotopes to create helium. The CNO cycle releases more energy than the proton-proton chain per He nucleus produced because it has more intermediate steps.
5. The CNO cycle requires more heat and pressure to function because it involves carbon, nitrogen, and oxygen isotopes, which are heavier elements. The proton-proton chain is simpler because it only involves hydrogen and doesn't require as much energy.
Learn more about CNO cycle: What is the net equation for CNO cycle? https://brainly.com/question/19469825
#SPJ11
If the reaction quotient (Q) is smaller than the equilibrium constant (K) for a reaction then which way will the reaction proceed? a. The reaction is at equilibrium and the reaction will proceed at equal rates in the reverse and forward direction. b. The reaction will proceed to the right (products side) c. The reaction equation is required to answer this question d. The reaction will proceed to the left( reactants side)
If the reaction quotient (Q) is smaller than the equilibrium constant (K) for a reaction, then the reaction will proceed towards the right, i.e., in the direction of the products. The correct option is (b).
This is because the forward reaction is favored over the reverse reaction as there is less number of products present, and the system tends to minimize the stress caused by an increase in the number of reactants. Here, stress refers to the difference between Q and K.
In other words, if Q < K, then the system has less number of products than it should at equilibrium. Hence, the reaction proceeds in the forward direction to increase the number of products until Q = K. After this point, the reaction reaches equilibrium, and the rates of the forward and reverse reactions become equal.
In contrast, if Q > K, then the system has more products than it should be at equilibrium. Hence, the reaction proceeds in the reverse direction to decrease the number of products until Q = K. After this point, the reaction reaches equilibrium, and the rates of the forward and reverse reactions become equal.
Therefore, option (b) is the correct answer. The reaction will proceed to the right (product side) if Q is smaller than K.
To know more about equilibrium constant, refer here:
https://brainly.com/question/15118952#
#SPJ11
What is [Al(H2O)5(OH) 2+] in a 0. 15 M solution of Al(NO3)3 that contains enough of the strong acid HNO3 to bring [H3O +] to 0. 10 M?
Al(NO3)3 solution concentration and the concentration of H3O+ ions in the solution following the addition of HNO3 are given in the problem. We can determine the presence of [Al(H2O)5(OH)2+] in the solution using this knowledge along with the known equilibria for the hydrolysis of Al3+.
For Al3+, the hydrolysis process may be expressed as follows:
Al(H2O)63+ + water becomes Al(H2O)5(OH)2+ + H3O+.
The reaction's equilibrium constant expression is as follows:
Al(H2O)5(OH)2+) = K
Al(H2O)63+ / [H3O+]
We must take into account the dissociation of Al(NO3)3 in water in order to determine [Al(H2O)5(OH)2+] in a 0.15 M solution of Al(NO3)3:
Al3+ (aq) + 3NO3- Al(NO3)3 (s) (aq)
Al3+ has a concentration of 0.45 M (3 times that of the Al(NO3)3 solution) in an Al(NO3)3 solution with a concentration of 0.15 M. H3O+ is present in the solution at a concentration of 0.10 M.
learn more about Al(NO3)3 solution here:
https://brainly.com/question/14215622
#SPJ4
A hard-working human brain, perhaps one that is grappling with physical chemistry, operates at about 25 W (1 W = 1J s-'). What mass of glucose must be consumed to sustain that power output for an hour?
Approximately 5.78 grams of glucose must be consumed to sustain a power output of 25 W for one hour.
Power = Energy/Time
25 W = Energy/3600 s
Energy = 25 W x 3600 s = 90000 J
C6H12O6 + 6O2 → 6CO2 + 6H2O + energy
The energy produced by the complete oxidation of glucose is approximately 2.8 x 10^6 J/mol. Therefore, to produce 90,000 J of energy, we need to divide 90,000 J by the energy produced per mole of glucose:
90,000 J / (2.8 x 10^6 J/mol) = 0.0321 mol
The molar mass of glucose is approximately 180 g/mol. Therefore, the mass of glucose required to sustain a power output of 25 W for one hour is:
0.0321 mol x 180 g/mol = 5.78 g
Power in physics is defined as the rate at which work is done or energy is transferred. It is a scalar quantity that measures how quickly a certain amount of energy is being transferred or converted from one form to another. The standard unit for power is the watt (W), which is equivalent to one joule per second (J/s).
In more mathematical terms, power is given by the formula P = W/t, where P represents power, W represents work, and t represents time. Power is also related to force and velocity through the equation P = Fv, where F represents force and v represents the velocity.
Power is an important concept in physics and engineering, as it is used to describe the performance of machines, engines, and other energy conversion systems. The greater the power of a system, the more work it can do in a given amount of time, and the faster it can accomplish a task.
To learn more about Power visit here:
brainly.com/question/13937812
#SPJ4
write the rate law for each of the following elementary steps and tell whether the reaction unimolecular, bimolecular or termolecular a) o3 cl --> o2 clo b) no2 no2 --> no3 no c) 2no h2 --> h2o2 n2
a. The rate law for the elementary step [tex]O_{3} + Cl[/tex] --> [tex]O_{2} + ClO[/tex] is k[[tex]O_{3}[/tex]][Cl], indicating that the reaction is bimolecular.
b. The rate law for the elementary step [tex]NO_{2}[/tex] + [tex]NO_{2}[/tex] --> [tex]NO_{3}[/tex] + NO is k[[tex]NO_{2}[/tex]]2, indicating that the reaction is termolecular.
c. The rate law for the elementary step 2NO + [tex]H_{2}[/tex] --> [tex]H_{2}O_{2}[/tex] + [tex]N_{2}[/tex] is k[NO][[tex]H_{2}[/tex]], indicating that the reaction is bimolecular.
The moleculаrity of а reаction refers to the number of reаctаnt pаrticles involved in the reаction. Becаuse there cаn only be discrete numbers of pаrticles, the moleculаrity must tаke аn integer vаlue. Moleculаrity cаn be described аs unimoleculаr, bimoleculаr, or termoleculаr. А unimoleculаr reаction occurs when а molecule reаrrаnges itself to produce one or more products. Аn exаmple of this is rаdioаctive decаy, in which pаrticles аre emitted from аn аtom.
А bimoleculаr reаction involves the collision of two pаrticles. Bimoleculаr reаctions аre common in orgаnic reаctions such аs nucleophilic substitution. А termoleculаr reаction requires the collision of three pаrticles аt the sаme plаce аnd time. This type of reаction is very uncommon becаuse аll three reаctаnts must simultаneously collide with eаch other, with sufficient energy аnd correct orientаtion, to produce а reаction.
For more information about rate law refers to the link: https://brainly.com/question/8327819
#SPJ11
what is the molarity of a calcium carbonate solution if 2.00 moles of calcium carbonate are dissolved in 125 ml of water?
Answer:
To calculate the molarity of a calcium carbonate (CaCO3) solution, we first need to convert the volume of water from milliliters (mL) to liters (L).
Volume of water = 125 mL = 0.125 L
Next, we need to use the number of moles of CaCO3 and the volume of water to calculate the molarity:
Molarity = number of moles / volume of solution
Molarity = 2.00 mol / 0.125 L
Molarity = 16.0 M
Therefore, the molarity of the calcium carbonate solution is 16.0 M. However, it's important to note that this concentration is not physically possible as the solubility of calcium carbonate in water is relatively low. Therefore, it's likely that the amount of calcium carbonate that actually dissolves in 125 mL of water is much less than 2.00 moles, making the actual molarity much lower.
(Please could you kindly mark my answer as brainliest)
How many atoms are in 0.75mol of H2O
There are approximately 4.5 x 10^23 atoms in 0.75 mol of H2O.
Or 4,500,000,000,000,000,000,000.
What 4 elements have many properties like iron?
Answer:
Cobalt, Nickel, Chromium, and Copper
when flour is mixed with water, an elastic network forms as gliadin and glutenin combine, and this is known as _____. it is both elastic and plastic and can expand with the inner pressure of gases (air, steam, and co2), allowing the bread to expand with the action of yeast.
When flour is mixed with water, an elastic network forms as gliadin and glutenin combine, and this is known as gluten. It is both elastic and plastic and can expand with the inner pressure of gases (air, steam, and co2), allowing the bread to expand with the action of yeast.
Gluten is a mixture of two proteins, gliadin and glutenin, which gives wheat dough its elastic and viscoelastic properties. When flour is mixed with water, the gluten forms an elastic network that can expand with the inner pressure of gases (air, steam, and CO2). This allows bread to rise with the action of yeast, making it light and fluffy. Gluten is also responsible for the chewy texture of bread and other baked goods that use wheat flour.
Gluten is found in wheat, barley, and rye. People with celiac disease or gluten intolerance are unable to digest gluten, and consuming it can cause a range of symptoms, including diarrhea, bloating, and abdominal pain. As a result, they must follow a gluten-free diet. Gluten-free flours made from rice, corn, and other grains can be used as a substitute for wheat flour in many recipes.
Learn more about celiac disease here: https://brainly.com/question/16779711
#SPJ11
In the illustration, which solute will dissolve first? A) solute in tank B will dissolve first B) solute in tanks A and B will dissolve at equal rates C) solute in tank A will dissolve first
A) The solute in tank B will dissolve first, is the key response.Temperature, pressure, and concentration are only a few examples of the variables that affect a solute's solubility in a solvent. As the water in both tanks A and B is originally pure.
in this instance the solute in tank B will dissolve first due to its larger concentration than in tank A. The concentration gradient between the solute and the water narrows as the solute in tank B dissolves and diffuses into the surrounding water, slowing the rate of dissolution. The solute in tank A will also eventually dissolve, but because of its lower initial concentration, it will do so more gradually.I am unable to tell which solute will dissolve first because the relevant illustration is not given. However, a number of variables, including temperature, pressure, and the chemical makeup of the solute and solvent, affect how soluble a solute is in a solvent. The solute that is more soluble in the given solvent will often dissolve first. It is impossible to predict which solute will dissolve first without more details or context.
learn more about solute in tank here:
https://brainly.com/question/9589556
#SPJ4
Which subatomic particles have a positive and negative electrical charge?
Electrons have a negative electrical charge, whereas protons have a positive charge.
Subatomic particles like electrons and protons are essential in defining how atoms and molecules behave. Electrons are negatively charged particles that move in shells or energy levels around an atom's nucleus. The positive charge of protons and the negative charge of electrons are identical in magnitude but diametrically opposed in sign. Together with neutral neutrons, protons are positively charged particles that make up an atom's nucleus. An atom's proton count establishes the element it belongs to. Atoms' chemical activity, particularly their capacity to form chemical bonds and reactions, is greatly influenced by the charges of their protons and electrons.
learn more about Subatomic particles here:
https://brainly.com/question/29765133
#SPJ4
Which change is MOST likely to occur because of the movement of the axis?
Answer:
This is due to the very slow wobble of the axis of Earth. Which change is most likely to occur because of the movement of the axis? Winter and summer months will reverse
Explanation:
hope its help you
Which organelle breaks down chemicals in the cell?
The organelle that breaks down chemicals in the cell is the lysosome.
Lysosomes are membrane-bound organelles that contain digestive enzymes that are responsible for breaking down various biomolecules, such as proteins, nucleic acids, carbohydrates, and lipids, into their constituent building blocks. These enzymes are able to break down these molecules through hydrolysis, where water is used to break the chemical bonds. Lysosomes play a crucial role in maintaining cellular homeostasis by removing unwanted or damaged cellular components, recycling macromolecules, and its defending against invading microorganisms. Dysfunction of lysosomes can lead to a variety of diseases known as lysosomal storage disorders.
To know more about Lysosomes, here
brainly.com/question/28202356
#SPJ4
In the pictured cell, the side containing zinc is the_________ and the side containing copper is the __________. The purpose of the Na2SO4 is to _________
In the pictured cell, the side containing zinc is the anode and the side containing copper is the cathode. The purpose of the Na2SO4 is to facilitate the transfer of electrons from the anode to the cathode.
A cell is a unit of life that is the smallest and most simple living organism, it can be classified as a complete organism, with all of the components that make up a living being, including DNA, membranes, and organelles. A voltaic cell is a device that converts chemical energy into electrical energy, it is also known as a galvanic cell or a Daniell cell. It is made up of two different metals that are submerged in an electrolyte solution that enables the transfer of electrons from one electrode to the other. The anode is the electrode that oxidizes and loses electrons during a redox reaction, this electrode is negatively charged, as it is the site of the oxidation reaction that releases electrons and generates an electrical current.
A cathode is an electrode that is reduced and gains electrons in a redox reaction, this electrode is positively charged and acts as a sink for electrons, absorbing them and using them to create a reduction reaction that generates an electrical current. The Na2SO4 in the pictured cell is an electrolyte solution that facilitates the transfer of electrons from the anode to the cathode. The salt dissociates into Na+ and SO42- ions, which then migrate toward the anode and cathode, respectively, where they can participate in redox reactions that generate an electrical current. This flow of ions helps to maintain a balance of charge in the cell and enables the transfer of electrons to occur more efficiently.
Learn more about anode at:
https://brainly.com/question/17109743
#SPJ11
Dinitrogen and dihydrogen react with each other to produce ammonia according to the following chemical equation:N2gdinitrogen+ 3H2gdihydrogen→2NH3gammonia(i) calculate the mass of ammonia produced if 2.00 × 103 g dinitrogen reacts with 1.00 × 103 g of dihydrogen.(ii) will any of the two reactants remain unreacted? if yes which one ?(iii) what would be its mass?
(i).The mass of ammonia produced is 2.43 x 10^3 g. (ii) The 71.4 moles of dinitrogen react with 214.2 moles of dihydrogen to produce 142.8 moles of ammonia. (iii) Mass of ammonia produced in given reaction with 1 gram of dinitrogen and 3 grams of dihydrogen is 1.22 g.
Using the given masses of dinitrogen and dihydrogen, we can calculate moles of each:
dinitrogen = mass/molar mass = 2.00 x 10^3 g/28 g/mol = 71.4 mol,
dihydrogen = mass/molar mass = 1.00 x 10^3 g/2 g/mol = 500 mol
The mass of ammonia produced can be calculated as:
[tex]Mass of ammonia = moles * molar mass = 142.8 mol * 17 g/mol = 2.43 * 10^{3 }g[/tex]
Therefore, the mass of ammonia produced is 2.43 x 10^3 g.
We can calculate the mass of ammonia produced using the equation:
[tex]mass = number of moles * molar mass = 2 * 0.0356 * 17.03 = 1.22 g[/tex]
To know more about dinitrogen, here
brainly.com/question/9909261
#SPJ4
ion channels that open and close in response to a change in membrane potential are called _____.
Ion channels that open and close in response to a change in membrane potential are called voltage-gated ion channels.
What is Voltage-gated ion channels?Voltage-gated ion channels are a specialized type of membrane protein that are embedded in the lipid bilayer of excitable cells. They have a pore that allows ions to flow through, and they can be selective for different types of ions, such as sodium (Na+), potassium (K+), or calcium (Ca2+).
The opening and closing of the channel's pore is controlled by changes in the membrane potential, which is the difference in electrical charge across the cell membrane.
These channels are crucial for the generation and propagation of electrical signals in excitable cells, such as neurons and muscle cells. Voltage-gated ion channels are capable of detecting small changes in membrane potential and responding by opening or closing their pore, allowing ions to flow across the membrane and alter the electrical state of the cell.
Learn more about ion channels here: https://brainly.com/question/12578279
#SPJ1
which area on the illustration represents the largest reservoir of nitrogen on earth? 7 3 1 4
The atmosphere, which is represented by Area 1, is the main source of nitrogen on Earth. About 78% of the Earth's atmosphere is made up of nitrogen gas (N2), which is essential to numerous industrial and biological processes.
Sadly, I am unable to give a precise response without access to the question's referenced illustration. I can, however, give some general knowledge about the nitrogen cycle and the various nitrogen reserves on Earth.
The environment contains nitrogen, an element that is necessary for life, in a variety of forms, including nitrogen gas (N2), ammonia (NH3), nitrite (NO2), nitrate (NO3-), and organic nitrogen. A number of biological and chemical mechanisms are used in the nitrogen cycle to change nitrogen's form and transfer it through various reservoirs.
The atmosphere, which contains around 78% nitrogen gas, is the planet's biggest source of nitrogen. Unfortunately, most organisms cannot access atmospheric nitrogen directly; instead, it must be transformed into a useful form through nitrogen fixation. Nitrogen fixation is the process of converting atmospheric nitrogen into ammonia or other organic nitrogen compounds, which can be taken up by plants and other organisms.
learn more about nitrogen gas here:
https://brainly.com/question/11426882
#SPJ4
When the following two solutions are mixed:
K2CO3(aq)+Fe(NO3)3(aq)
the mixture contains the ions listed below. Sort these species into spectator ions and ions that react.
Drag the appropriate items to their respective bins.
NO3-)aq), Fe3+ , CO3 2-, K+
Part B
What is the correct net ionic equation, including all coefficients, charges, and phases, for the following set of reactants? Assume that the contribution of protons from H2SO4 is near 100 %.
Ba(OH)2(aq)+H2SO4(aq)?
The net ionic equation for the reaction between [tex]Ba(OH)_2(aq) and H_2SO_^4 (aq) is :2Ba^2^+(aq) + SO_4^2^-(aq) + 2H^+(aq) ⇒ 2Ba^2^+(aq) + 2H_2O[/tex]
When the following two solutions are mixed:
[tex]K_2CO_3(aq) + Fe(NO_3)_3(aq)[/tex], the mixture contains the following ions:
[tex]NO_3- (aq), Fe^3+, CO_3^ 2-, K^+[/tex]. The spectator ions are NO3- (aq) and K+, and the ions that react are Fe3+ and CO3 2-.
Hence , The correct net ionic equation, including all coefficients, charges, and phases, for the reactants [tex]Ba(OH)_2(aq) + H_2SO_4(aq) [/tex] is 2Ba^2^+(aq) + SO_4^2^-(aq) + 2H^+(aq) ⇒ 2Ba^2^+(aq) + 2H_2O[/tex] .
To know more about Ionic equation refer here :
https://brainly.com/question/11510759
#SPJ11
A photon of light has a wavelength of 0. 050 cm. Calculate its energy
A photon of light has an energy of 3.977 x [tex]10^{-19}[/tex] joules and a wavelength of 0.050 centimetres.
The energy of a photon is related to its wavelength by the formula E = hc/λ, where E is the energy, h is Planck's constant (6.626 x [tex]10^{-34}[/tex] joule seconds), c is the speed of light (2.998 x [tex]10^{8}[/tex] meters per second), and λ is the wavelength of the photon.
To use this formula, we need to convert the wavelength of the photon from centimeters to meters, since c is given in meters per second. We can do this by dividing 0.050 cm by 100, which gives us 5.0 x [tex]10^{-4}[/tex]meters.
Now we can plug in the values we have into the formula: E = (6.626 x [tex]10^{-34}[/tex] joule seconds) x (2.998 x [tex]10^{8}[/tex] meters per second) / (5.0 x [tex]10^{-4}[/tex]meters)
Simplifying the equation, we get:
E = 3.977 x [tex]10^{-19}[/tex] joules
Therefore, a photon of light with a wavelength of 0.050 cm has an energy of 3.977 x [tex]10^{-19}[/tex] joules. It is important to note that photons are the smallest quantifiable packets of electromagnetic energy, and their energy is directly proportional to their frequency and inversely proportional to their wavelength.
To learn more about wavelength refer to:
brainly.com/question/27353508
#SPJ4
When a utensil is stored in water between uses, what are the requirements?A. Running water at any temperature, or a container of water at 70 F (21 C) or lower.B. Running water at any temperature, or a container of water at 135 F (57 C) or lower.C. Running water at 70 F (21 C) or lower, or a container of water at 70 F (21 C) or lower.D. Running water at 135 F (57 C) or lower, or a container of water at 135 F (57 C) or lower.
D. Running water at 135 F (57 C) or lower, or a container of water at 135 F (57 C) or lower.
In the given figure, red litmus paper is inserted in solution and colour remains unchanged then what may be contained in vessel among acid, base and salt solution? How can it be further tested to confirm it?
Answer:
Explanation: If the red litmus paper is inserted into the solution and the color remains unchanged, it indicates that the solution is likely a neutral solution or a solution with a pH close to 7. This means that it may contain either water or a salt solution.
To further confirm whether the solution contains a salt or water, we can perform a simple test using blue litmus paper. We can dip a blue litmus paper into the solution, and if it turns red, it indicates that the solution is acidic. If it remains blue, it indicates that the solution is basic.
If the blue litmus paper also does not change its color, it means that the solution is neutral or has a pH close to 7, which supports the possibility that the solution may contain either water or a salt solution.
To further test whether the solution contains a salt or not, we can perform a flame test. We can take a small amount of the solution and place it on a platinum wire loop and hold it in a Bunsen burner flame. If the flame produces a characteristic color, it indicates that the solution contains a salt. The characteristic color of the flame will depend on the metal ion present in the salt.
Overall, based on the initial test with the red litmus paper, the solution is likely neutral or close to neutral, and additional tests with blue litmus paper and flame test can be used to confirm whether the solution contains a salt or water.
suppose you experimentally calculate the value of the density of co2 as 2.03 g/l. the known value is 1.98 g/l. what is the percent error of your experimentally determined density?
The percent error of your experimentally determined density is that is an error of 2.53%.
It can be calculated using the following equation: Error % = (Experimentally Determined Value - Known Value)/Known Value x 100. So in your case, the equation would look like: Error % = (2.03 g/l - 1.98 g/l)/1.98 g/l x 100
This gives us an error of 2.53%.
The given value of density of CO2 is 2.03 g/L and the actual value of density of CO2 is 1.98 g/L. The percent error can be calculated using the below formula: Percent error = (|experimental value - actual value|/actual value) × 100Therefore, the percent error of experimentally determined density is Percent error = (|2.03 g/L - 1.98 g/L|/1.98 g/L) × 100= (0.05 g/L/1.98 g/L) × 100= 2.53%Thus, the percent error of the experimentally determined density is 2.53%.
Read more about density:
https://brainly.com/question/1354972
#SPJ11
Use these two constants for the question that follows:
e = 1.6 × 10^−19 C
k = 8.99 × 10^9 N m^2/C^2
A positive charge and a negative charge are 10^−15 m away from each other. Using Coulomb's law, which of the following is the electrical force between these two particles?
230 N
−230 N
120 N
−120 N
Answer: -230 N
Explanation:
The electrical force between two point charges q1 and q2 separated by a distance r is given by Coulomb's law:
F = k * (q1 * q2) / r^2
where k is the Coulomb constant, q1 and q2 are the magnitudes of the charges, and r is the distance between them.
In this case, we have a positive charge and a negative charge, which means that q1 and q2 have opposite signs. Let's assume that the positive charge has a magnitude of q and the negative charge has a magnitude of -q. Then, the electrical force between them can be calculated as:
F = k * (q * (-q)) / r^2 = -k * q^2 / r^2
Substituting the given values of e and k, we get:
F = - (8.99 × 10^9 N m^2/C^2) * (1.6 × 10^-19 C)^2 / (10^-15 m)^2 ≈ -230 N
Note that the negative sign indicates that the force is attractive, which is expected for opposite charges. Therefore, the correct answer is:
-230 N.
Iron nail wrapped with copper wire Determine the standard reduction potential of the cathode half-reaction, the standard reduction potential of the anode half-reaction, and the standard potential of the cell. E°cathode ____
(V) E° anode ___ (V) E° cell ___ (V)
The standard reduction potential of the cathode half-reaction is -0.36V,
The standard reduction potential of the anode half-reaction is +0.34V,
and the standard potential of the cell is -0.02V.
The cathode half-reaction is the reduction of iron (Fe²⁺) to iron (Fe):
Fe²⁺ + 2e⁻ -> Fe; E°cathode = -0.36V.
The anode half-reaction is the oxidation of copper (Cu) to copper (Cu²⁺):
Cu -> Cu²⁺ + 2e⁻; E°anode = +0.34V.
The standard potential of the cell is determined by subtracting the standard reduction potential of the anode from the standard reduction potential of the cathode:
E°cell = E°cathode - E°anode
= -0.36V - (+0.34V)
= -0.02V.
Learn more about the standard potential of the cell here:
https://brainly.com/question/19036092
#SPJ11
