Post-Lab Questions
1. A beverage company is having trouble with the production of the dye in their drinks. The color of their drink mix is supposed to be a pale green color, but they often get different results. For each unwanted result, choose the most plausible explanation to help the company improve the formula.
(1pts)
The color of the drink is too pale after adding the dye to the drink because
Choose...too much dye was added to the drink.the water in the drink is evaporating.not enough dye was added to the drink.the wrong dye was added to the drink.
(1pts)
The color of the dye is appearing as red, instead of green because
Choose...too much dye was added to the drink.the water in the drink is evaporating.not enough dye was added to the drink.the wrong dye was added to the drink.
(1pts)
The drink started out the correct color but it is getting darker over time, even though nothing has been added to the drink, because
Choose...too much dye was added to the drink.the water in the drink is evaporating.not enough dye was added to the drink.the wrong dye was added to the drink.
(1pts)
2. Beer's Law states that A=εbc, where A is the absorbance, ε is the molar absorptivity of the solute, b is the path length, and c is the concentration. Identify the experimental evidence from the activity that you have for the dependence of absorbance on each variable.
The evidence for the dependence of absorbance on the variable ε is
increasing the cuvette width increases the absorbance.
changing the compound changes the absorbance behavior.
adding more water decreases the absorbance.
Choose...ABC
(1pts)
The evidence for the dependence of absorbance on the variable b is
increasing the cuvette width increases the absorbance.
changing the compound changes the absorbance behavior.
adding more water decreases the absorbance.
Choose...ABC
(1pts)
The evidence for the dependence of absorbance on the variable c is
increasing the cuvette width increases the absorbance.
changing the compound changes the absorbance behavior.
adding more water decreases the absorbance.
Choose...ABC
(1pts)
3. Describe how you could use the Beer's Law simulation to experimentally determine the best wavelength at which to perform an experiment.
Measure the absorbance for solutions of multiple different solutes and find the minimum absorbance.
Measure the absorbance for solutions with different concentrations and find the slope of the trendline.
Measure the absorbance for the same solution at different wavelengths and find the maximum absorbance.
Measure the absorbance for the same solution in different cuvette sizes and find the y-intercept.
Answer:
1. not enough dye was added to the drink.
The wrong dye was added to the drink
the water in the drink is evaporating
2. Changing the compound changes the absorbance behavior.
3. Measure the absorbance for the same solution in different cuvette sizes and find the y-intercept.
Explanation:
When the beverage company adds dye to the drink, there should be standard quantity added to the drink so that the color of the drink remains constant. When too much dye is added to the drink, the color will get dark brown or black. When the color of drink get lighter than green this means dye is not added in required quantity.
An electron in the ground state absorbs a single photon of light and then relaxes back to the ground state by emitting an infrared photon (1200 nm) followed by an orange photon (600 nm). What is the wavelength of the absorbed photon?
A. 400 nm
B. 600 nm
C. 1800 nm
What evidence supports the law of conservation of energy?
Light energy is converted to chemical energy during photosynthesis.
Oxygen is made from the breakdown of carbon dioxide during photosynthesis.
Energy is absorbed by chlorophyll during photosynthesis.
The sun gives off light energy that is absorbed by plants.
Answer:
light energy is converted to chemical energy during photosynthesis.
Explanation:
Law of conservation of energy says: Energy can neither be created nor destroyed-only converted from one form of energy to another.
Answer:
A. Light energy is converted to chemical energy during photosynthesis.
If 2.18 g of sodium peroxide (Na2O2) react with water to produce sodium hydroxide abs oxygen, how many liters of oxygen will be produced at 17.7 Celsius abs 726 torr?
Answer:
0.350 L
Explanation:
2Na₂O₂ + 2H₂O → 4NaOH + O₂First we convert 2.18 g of Na₂O₂ into moles, using its molar mass:
2.18 g ÷ 78 g/mol = 0.0279 mol Na₂O₂Then we convert 0.0279 moles of Na₂O₂ into moles of O₂, using the stoichiometric coefficients of the reaction:
0.0279 mol Na₂O₂ * [tex]\frac{1molO_2}{2molNa_2O_2}[/tex] = 0.0140 mol O₂Finally we use the PV=nRT formula to calculate the volume of oxygen produced:
P = 726 torrV = ?n = 0.0140 molR = 62.36 torr·L·mol⁻¹·K⁻¹T = 17.7 °C ⇒ 17.7 + 273.2 = 290.9 KInputting the data:
726 torr * V = 0.0140 mol * 62.36 torr·L·mol⁻¹·K⁻¹ * 290.9 KV = 0.350 LA compound that contains only carbon, hydrogen, and oxygen is 58.8% C and 9.87% H by mass. What is the empirical formula of this substance
Answer: The empirical formula of the compound becomes [tex]C_5H_{10}O_2[/tex]
Explanation:
The empirical formula is the chemical formula of the simplest ratio of the number of atoms of each element present in a compound.
Let the mass of the compound be 100 g
Given values:
% of C = 58.8%
% of H = 9.87%
% of O = [100 - 58.8 - 9.87] = 31.33%
Mass of C = 58.8 g
Mass of H = 9.87 g
Mass of O = 31.33 g
The number of moles is defined as the ratio of the mass of a substance to its molar mass. The equation used is:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)
To formulate the empirical formula, we need to follow some steps:
Step 1: Converting the given masses into moles.Molar mass of C = 12 g/mol
Molar mass of H = 1 g/mol
Molar mass of O = 16 g/mol
Putting values in equation 1, we get:
[tex]\text{Moles of C}=\frac{58.8g}{12g/mol}=4.9 mol[/tex]
[tex]\text{Moles of H}=\frac{9.87g}{1g/mol}=9.87 mol[/tex]
[tex]\text{Moles of O}=\frac{31.33g}{16g/mol}=1.96mol[/tex]
Step 2: Calculating the mole ratio of the given elements.Calculating the mole fraction of each element by dividing the calculated moles by the least calculated number of moles that is 1.96 moles
[tex]\text{Mole fraction of C}=\frac{4.9}{1.96}=2.5[/tex]
[tex]\text{Mole fraction of H}=\frac{9.87}{1.96}=5.03\approx 5[/tex]
[tex]\text{Mole fraction of O}=\frac{1.96}{1.96}=1[/tex]
Converting the mole fraction into whole numbers by multiplying them with 2.
[tex]\text{Mole fraction of C}=2.5\times 2=5[/tex]
[tex]\text{Mole fraction of H}=5\times 2=10[/tex]
[tex]\text{Mole fraction of O}=1\times 2=2[/tex]
Step 3: Taking the mole ratio as their subscripts.The ratio of C : H : O = 5 : 10 : 2
Hence, the empirical formula of the compound becomes [tex]C_5H_{10}O_2[/tex]
The empirical formula of the substance is[tex]C_5H_{10}O_2[/tex].
Explanation:
Given:
A compound made up of 58.8% of carbon, 9.87% hydrogen, and oxygen.
To find:
The empirical formula of this substance.
Solution
The percentage of carbon in a given substance by mass = 58.8%
The percentage of hydrogen in a given substance by mass = 9.87%
The percentage of oxygen in a given substance by mass :
[tex]= 100\%-58.8\%- 9.87\%=31.33\%[/tex]
Consider 100 grams of a substance.
In 100 grams of substance:
The mass of carbon =58.8% of 100 g = 58.8 g
The mass of hydrogen = 9.87% of 100 g = 9.87 g
The mass of oxygen = 31.33% of 100 g= 31.33 g
The moles of carbon [tex]=\frac{58.8 g}{12.0107 g/mol}=4.90 mol[/tex]
The moles of hydrogen[tex]=\frac{9.87g}{1.00784g/mol}=9.79 mol[/tex]
The moles of oxygen[tex]=\frac{31.33g}{15.999g/mol}=1.96 mol[/tex]
let the empirical formula of the substance = [tex]C_xH_yO_z[/tex]
The value of subscript x:
[tex]=\frac{4.90 mol}{1.96 mol}=2.5[/tex]
The value of subscript y:
[tex]=\frac{9.79mol}{1.96 mol}=5[/tex]
The value of subscript z:
[tex]=\frac{1.96mol}{1.96 mol}=1[/tex]
The empirical formula of a substance :
[tex]C_{2.5}H_5O_1=C_{\frac{25}{10}}H_5O_1=C_{25}H_{50}O_{10}[/tex]
Reducing to the lowest whole numbers:
[tex]C_{25}H_{50}O_{10}=C_5H_{10}O_2[/tex]
The empirical formula of the substance is [tex]C_5H_{10}O_2[/tex].
Learn more about the empirical formula here:
brainly.com/question/1247523?referrer=searchResults
brainly.com/question/1363167?referrer=searchResults
Which probing question lies within the scope of physics?
O A.
Are fish in the open ocean
attracted by underwater sounds?
O B.
Does increasing the saltiness of
ocean water affect the speed
of sound in the water?
O C.
What effect does the release of industrial wastewater have on
the acidity of oceans?
D. What is the effect of rising sea temperatures on
ocean currents?
Answer:
answer number C is the correct answer for this
During a reaction, ΔH for reactants is −750 kJ/mol and ΔH for products is 920 kJ/mol. Which statement is correct about the reaction? (5 points)
Group of answer choices
It is endothermic because the energy required to break bonds in the reactants is less than the energy released when the products are formed.
It is endothermic because the energy required to break bonds in the reactants is greater than the energy released when the products are formed.
It is exothermic because the energy required to break bonds in the reactants is less than the energy released when the products are formed.
It is exothermic because the energy required to break bonds in the reactants is greater than the energy released when the products are formed.
Answer: The statement it is endothermic because the energy required to break bonds in the reactants is less than the energy released when the products are formed, is true.
Explanation:
A chemical reaction in which heat energy is released is called an exothermic reaction. For exothermic reactions, the value of [tex]\Delta H[/tex] is always negative.
A chemical reaction in which heat energy is absorbed is called an endothermic reaction. For endothermic reaction, the value of [tex]\Delta H[/tex] is always positive.
In endothermic reactions, energy required for breaking the bonds between reactants is less than the energy when products are formed due to which the value of [tex]\Delta H[/tex] remains positive.
Thus, we can conclude that the statement it is endothermic because the energy required to break bonds in the reactants is less than the energy released when the products are formed, is true.
It is endothermic because the energy required to break bonds in the reactants is greater than the energy released when the products are formed. The correct option is B.
The above reaction is endothermic because more energy is produced when new bonds form in the products (H = 920 kJ/mol) than is required to break bonds in the reactants (H = -750 kJ/mol).
In an endothermic process, more energy than is generated during bond creation is absorbed from the environment to dissolve existing bonds. This causes a net absorption of energy, which cools the system.
The reaction takes more energy than it releases, proving its endothermic nature, as seen by the positive difference between the energy needed to dissolve bonds and the energy released during bond formation.
Thus, the correct option is B.
For more details regarding endothermic process, visit:
https://brainly.com/question/28909381
#SPJ3
Your question seems incomplete, the probable complete question is:
During a reaction, ΔH for reactants is −750 kJ/mol and ΔH for products is 920 kJ/mol. Which statement is correct about the reaction? (5 points)
Group of answer choices
A. It is endothermic because the energy required to break bonds in the reactants is less than the energy released when the products are formed.
B. It is endothermic because the energy required to break bonds in the reactants is greater than the energy released when the products are formed.
C. It is exothermic because the energy required to break bonds in the reactants is less than the energy released when the products are formed.
D. It is exothermic because the energy required to break bonds in the reactants is greater than the energy released when the products are formed.
How many grams of solute are present in 635mL of 0.450 M KBr?
Answer:
34.03 g
Explanation:
We'll begin by converting 635 mL to L. This can be obtained as follow:
1000 mL = 1 L
Therefore,
635 mL = 635 mL × 1 L / 1000 mL
635 mL = 0.635 L
Thus, 635 mL is equivalent to 0.635 L
Next, we shall determine the number of mole of the solute (KBr) in the solution. This can be obtained as follow:
Volume = 0.635 L
Molarity = 0.450 M
Mole of KBr =?
Mole = Molarity × Volume
Mole of KBr = 0.450 × 0.635
Mole of KBr = 0.286 mole
Finally, we shall determine the mass of 0.286 mole of KBr. This can be obtained as follow:
Mole of KBr = 0.286 mole
Molar mass of KBr = 39 + 80
= 119 g/mol
Mass of KBr =?
Mass = mole × molar mass
Mass of KBr = 0.286 × 119
Mass of KBr = 34.03 g
Thus, the mass of the solute (KBr) in the solution is 34.03 g
The mass of a single tantalum atom is 3.01×10-22 grams. How many tantalum atoms would there be in 37.1 milligrams of tantalum?
Answer: There are [tex]1.23 \times 10^{22}[/tex] atoms present in 37.1 mg of tantalum.
Explanation:
Given: Mass of single tantalum atom = [tex]3.01 \times 10^{-22} g[/tex]
Mass of tantalum atoms = 37.1 mg (1 mg = 0.001 g) = 0.0371 g
Therefore, number of tantalum atoms present in 0.0371 grams is calculated as follows.
[tex]No. of atoms = \frac{0.0371 g}{3.01 \times 10^{-22}}\\= 1.23 \times 10^{20}[/tex]
Thus, we can conclude that there are [tex]1.23 \times 10^{22}[/tex] atoms present in 37.1 mg of tantalum.
There are [tex]1.23\times 10^{20}[/tex] atoms of tantalum in 37.1 mg of tantalum.
Explanation:
Given:
Mass of single atom of tantalum =[tex]3.01\times 10^{-22} g[/tex]
To find:
The number of atoms of tantalum in 37.1 milligrams.
Solution:
Mass of tantalum = 37.1 mg
[tex]1 mg = 0.001 g\\37.1 mg=37.1\times 0.001 g=0.0371 g[/tex]
The number of atoms in 0.0371 grams of tantalum = N
Mass of a single atom of tantalum = [tex]3.01\times 10^{-22} g[/tex]
Then a mass of N atoms of tantalum will be:
[tex]0.0371 g=N\times 3.01\times 10^{-22} g\\N=\frac{0.0371 g}{ 3.01\times 10^{-22} g}\\=1.23\times 10^{20}[/tex]
There are [tex]1.23\times 10^{20}[/tex] atoms of tantalum in 37.1 mg of tantalum.
Learn more about the unitary method here:
brainly.com/question/24566352
brainly.com/question/17743460
What is the theoretical yield of cyclohexene (in grams) that could be formed from 0.105 moles of cyclohexanol and 0.0444 moles of 85% phosphoric acid
Answer:
3.65 g of cyclohexene
Explanation:
Cyclohexanol + phosphoric acid ----> cyclohexene
The reaction is 1:1 hence the limiting reactant is phosphoric acid.
Hence,
1 mole of phosphoric acid yields 1 mole of cyclohexene
0.0444 moles of phosphoric acid yields 0.0444 moles of cyclohexene
Theoretical yield = number of moles of cyclohexene × molar mass of cyclohexene
Theoretical yield = 0.0444 moles of cyclohexene × 82.143 g/mol
Theoretical yield = 3.65 g of cyclohexene
Which elements are main-group elements?
1. Te
2. K
3. V
4. Re
5. Ag
Answer:
Te
K
Explanation:
Main group elements are elements designated and located on the s-block and p-block on the periodic table. The core group or prominent elements are the elements that make up those groups. These groupings comprise the most naturally rich and abundant elements. The main group elements are those whose characteristics are more predicted as a function of their periodic table location. From the given options, only Te and K are elements of the main-group.
How does a scientist form a hypothesis?
Explanation: The hypothesis is a prediction, but it involves more than a guess. Most of the time, the hypothesis begins with a question which is then explored through background research. It is only at this point that researchers begin to develop a testable hypothesis.
(Unless you are creating an exploratory study, your hypothesis should always explain what you expect to happen)
what class of organic compound is formed when cyclopentanone reacts with ethylamine in the presence of trace acid
The question is incomplete, the complete question is;
What functional group results when cyclopentanone reacts with ethylamine in the presence of trace acid? A) cyanohydrin B) semicarbazone C) imine D) enamine E) oxime
Answer:
imine
Explanation:
An imine is an unsaturated amine. An imine contains the carbon- nitrogen double bond.
Imines are obtained when a carbonyl compound is condensed with NH3 or an amine. The reaction involves several steps in its mechanism.
Since cyclopentanone is a ketone (carbonyl compound) and ethylamine is an amine,in the presence of trace acid, condensation of the two compounds occur to yield an imine
g Calculate the percent yield when you start with 0.50 grams of salicylic acidand end with 0.33 grams of aspirin. The molecular weight of salicylic acid is 138.12 g/mol, and the molecular weight of aspirin is 180.157 g/mol.
Explanation:
hope the picture above helps you to understand:)
Which is a property of all bases?
Answer: The property of all bases is that they are substances which neutralizes an acid to form a salt and water only.
Explanation:
A base is also s substance that can accept or combine with a proton; a proton acceptor.
Bases include the oxides, hydroxides and carbonates of metals. These include MgO,Na2O, NaOH,Ca(OH)2. Most metals burn in oxygen to form metallic oxides which are basic. Examples are the MgO and Na2O.
Other properties or characteristics of bases includes:
--> They have a bitter taste.
--> They turn red litmus paper blue.
--> They are soapy to touch.
--> Aqueous solutions of bases are also electrolytes. Bases can be either strong or weak, just as acids can.
Bases (sodium hydroxide) can be used in the preparation of soaps, glass, paper and rayon. While some bases (magnesium hydroxide) can also be used to manufacture toothpaste and laxatives.
The Li2+ ion is very similar to the hydrogen atom, in that it has one electron and energy levels similar
to the hydrogen atom. However, the relation = − (
1
2 −
1
2) cannot be used for this ion but
rather the relation = −2+ (
1
2 −
1
2) where the constant 2+=1.96x10-17J.
Use this relation to determine the third ionization energy, which is energy required to remove the last
electron from a Li2+ ion in kJ/mol, if the ion starts off in the ground state (Li2+ → Li3+
+ e-
).
Write the balanced half-equations for silver + oxygen= silver oxide:
Answer: The balanced half-equations for silver + oxygen= silver oxide are:
Oxidation-half reaction: [tex]Ag \rightarrow 2Ag^{+} + 2e^{-}[/tex]
Reduction-half reaction: [tex]O_{2} + 2e^{-} \rightarrow 2O^{-}[/tex]
Explanation:
The word equation is as follows.
silver + oxygen = silver oxide
In terms of chemical formulas this equation can be written as follows.
[tex]Ag + O_{2} \rightarrow Ag_{2}O[/tex]
The removal on electron(s) from an atom, ion or molecule in a chemical reaction is called oxidation.
The gain of electron(s) by an atom, ion or molecule in a chemical reaction is called reduction.
Hence, half-reaction equations for the given reaction is as follows.
Oxidation-half reaction: [tex]Ag \rightarrow 2Ag^{+} + 2e^{-}[/tex]
Reduction-half reaction: [tex]O_{2} + 2e^{-} \rightarrow 2O^{-}[/tex]
As the number of atoms participating in the reaction are equal. Hence, the half-equations are balanced.
Thus, we can conclude that the balanced half-equations for silver + oxygen = silver oxide are:
Oxidation-half reaction: [tex]Ag \rightarrow 2Ag^{+} + 2e^{-}[/tex]
Reduction-half reaction: [tex]O_{2} + 2e^{-} \rightarrow 2O^{-}[/tex]
Perform the following operation and express the answer in scientific notation.
7.296×10² ÷ 9.6×10^-9
Answer:
7.6×10¹⁰
Explanation:
7.296×10²÷9.6×10⁻⁹
To solve such problem,
We group the whole number ans solved seperately and also group the indices and solve the seperately
Step1 : 7.296/9.6 = 0.76
Step 2: applying the law of indices,
10²÷10⁻⁹ = 10⁽²⁺⁹⁾ = 10¹¹
Therefore,
7.296×10²÷9.6×10⁻⁹ = 0.76×10¹¹ = 7.6×10¹⁰
Draw the major product that is obtained when (2S,3S)-2-Bromo-3-phenylbutane is treated with sodium ethoxide.
Answer:
Explanation:
The mechanism of the reaction is shown in the diagram below. From the reaction, when (2S,3S)-2-Bromo-3-phenylbutane undergoes a reaction with sodium ethoxide (ETONa), the E2 elimination reaction is put into place. Here, the H and the leaving group are antiperiplanar to one another and the reaction mechanism proceeds to form an isomeric (E)-2-phenyl-2butane as the major product.
3. Does entropy increase or decrease in the following processes?
A. Complex carbohydrates are metabolized by the body, converted into simple sugars.
Answer: Increase
es-lesund
B. Steam condenses on a glass surface.
Answer:
decreare
-->
MgCl2(s)
C. Mg(s) + Cl2(g)
correct
Answer:
Answer:
hope it helps much as you can
An element of the environment that causes a population the decrease is
A) the birthrate minus the death rate
B) the carrying capacity
C) a limiting factor
D) the death rate
An object was measured by a worker as 14.6cm long, however, the manufacturer specifications list the length of the object at 14.4cm. What is the percent error in the worker's measurement? A. 1.39%
B. 1.37%
it's 0.2cm different from the expected value, wich was 14.6cm
how many percent that are is calculated in the screenshot.
rounded it's 1.37%
Help pls!!!
For groups 13 through 18, the number of valence electrons is equal to the group number
a. minus 10
b. minus the period number
c. plus 1
d. plus the period number
Answer:
a. minus 10
Explanation:
An element in group 13 = Boron ,valence electrons = 3 , therefore, valence electrons in group 13 = group no. -10
An element in group 18 = Neon, valence electrons = 8 , therefore, valence electrons in group 18 = group no. - 10
For groups 13 through 18, the number of valence electrons in an atom is equal to the group number minus 10. Therefore, option (A) is correct.
What is a valence electron?Valence electrons in an atom can be described as the electrons occupying the outer most electron shell of an atom while the electrons in the inner shell are core electrons. Lewis structures can be helpful to calculate the number of valence electrons.
Valence electrons can be filled in several electron shells as they are caused interaction between atoms and responsible for the formation of chemical bonds. Only valence electrons can contribute to the formation of a chemical bond and decide the reactivity of the element.
The general electronic configuration of group 13 is ns²np¹ has three valence electrons. It can be determined as group number - 10 = 13 - 10 = 3.
The general electronic configuration of group 18 is ns²np⁶ has eight valence electrons. It can be determined as group number - 10 = 18 - 10 = 8.
Learn more about valence electrons, here:
brainly.com/question/18612412
#SPJ2
How do I answer the question in bold? Thank you!
Answer:
6.7855 * 10^18
Explanation:
There are 2 moles in H2
Avagadro's number: 6.022E23
8.14E42*1/6.022E23 * 1/2
=6.7855 * 10^18
g 0.500 L of a solution with a concentration of 0.25 M is needed. To prepare this solution, a stock solution with a concentration of 1.25 M is prepared. What volume of the stock solution is needed to create the desired solution
Answer:
0.1 L
Explanation:
From the question given above, the following data were obtained:
Concentration of stock solution (C₁) = 1.25 M
Volume of diluted solution (V₂) = 0.5 L
Concentration of diluted solution (C₂) = 0.25 M
Volume of stock solution needed solution (V₁) =?
The volume of the stock solution needed can be obtained as follow:
C₁V₁ = C₂V₂
1.25 × V₁ = 0.25 × 0.5
1.25 × V₁ = 0.125
Divide both side by 1.25
V₁ = 0.125 / 1.25
V₁ = 0.1 L
Therefore, the volume of the stock solution needed is 0.1 L
The boiling point of a liquid is 50°C. What is this temperature on the Kelvin scale?
Answer:
323.15 or just 323 depending on the teacher
PLEASE ANSWER THESE:
Question 4: Biological Molecules (5 points)
A. Pepsin is an enzyme used by the human body to break down food in the stomach.
i. Explain, in terms of a chemical reaction, how pepsin helps a person. (3 points)
ii. What are the building blocks of the pepsin macromolecule? (2 points)
Answer: the answer is A
Explanation: add me hope i helped
i.What are organic fertilizers?
ii.State three advantages of organic fertilizers over inorganic fertilizers.
Answer:
Organic fertilizers are those fertilizers that are not artificially produced but are natural and has carbon in them.
Fertilizers in the broad term are used to provide nutrient to the soil and boost growth of crops.
Some of the advantages of organic fertilizers to inorganic fertilizers are:
They do not make crusts on the soil, unlike inorganic fertilizers.
They help add structure to the soil because of the good water movement into the soil
They are easier on the soil because they feed good microbes.
How many molecules are present in 1296 g of dinitrogen pentoxide (N2O5)
Answer:
The molar mass of N2O5 is 108 g/mol. 1296g of N2O5 has 1296 / 108 = 12 moles. 1 mole contains 6.022 x 10^23 molecules
༒How much does the earth weigh?☆☆☆☆☆☆☆☆☆☆☆☆
Answer:
Earth has a mass of 5.9736×1024 kg
5.972×10²⁴kghope it is helpful to you
