What value of z should we use when making a 93% confidence interval for p? A. 1.48 B. It's impossible to make a 93% CI. C. 2.70 D. 1.81

There are 720 different choices if order matters and there are 120 different choices if order does not matter.

a) If order matters,

The player can choose the first number in 10 ways (any of the digits 0-9), the second number in 9 ways (since one digit has already been chosen), and the third number in 8 ways (since two digits have already been chosen).

So the total number of choices is:

10 x 9 x 8 = 720

Therefore, there are 720 different choices if order matters.

b) If order does not matter,

We need to divide the number of choices by the number of ways the three numbers can be arranged.

Since there are 3 numbers, they can be arranged in 3! = 6 ways.

So the number of choices when order does not matter is:

(10 x 9 x 8) / 6 = 120

Therefore, there are 120 different choices if order does not matter.

Read more about permutation and combination at

https://brainly.com/question/11732255

#SPJ1

The sample size cannot be determined from this information alone. A confidence interval for a population mean is calculated based on the mean of a sample, the sample size, and the standard deviation.

Deviation is the difference between the expected value or average of a set of data and the actual value. For example, if the average of a set of numbers is 10 and one of the numbers is 15, the deviation of that number is 5. Deviation is a measure of how much variation exists in a set of data. It is an important tool used to measure the accuracy of a data set and identify outliers within that data set. Deviation is also used to measure the volatility of a stock or other investment, which is a measure of how much its price changes over time.

Therefore, to determine the sample size, the mean, standard deviation, and confidence interval of the sample must all be known.

To learn more about deviation

https://brainly.com/question/12402189

#SPJ1

The sample size cannot be determined from this information alone. A confidence interval for a population mean is calculated based on the mean of a sample, the sample size, and the standard deviation.

Deviation is the difference between the expected value or average of a set of data and the actual value. For example, if the average of a set of numbers is 10 and one of the numbers is 15, the deviation of that number is 5. Deviation is a measure of how much variation exists in a set of data. It is an important tool used to measure the accuracy of a data set and identify outliers within that data set. Deviation is also used to measure the volatility of a stock or other investment, which is a measure of how much its price changes over time.

Therefore, to determine the sample size, the mean, standard deviation, and confidence interval of the sample must all be known.

To learn more about deviation
brainly.com/question/12402189
#SPJ1

Complete Question:
A 95% confidence interval for a population mean was reported to be 152 to 160. If s 15, what sample size was used in this study?

The number of different selections possible if at least 3 balls must be blue is 35


1. Calculate the total number of possible selections (6 red + 7 blue = 13 total): 13C4 = 715
2. Calculate the number of possible selections that have fewer than 3 blue balls: 6C4 = 15
3. Subtract the number of possible selections with fewer than 3 blue balls from the total number of possible selections: 715 - 15 = 700
4. Divide the answer by the number of selections with exactly 3 blue balls: 700/7 = 100
5. Multiply the result by the number of selections with exactly 4 blue balls: 100 * 7 = 700
6. Finally, subtract the number of selections with 4 blue balls from the total number of possible selections: 715 - 700 = 35

See more about the number at: https://brainly.com/question/28065038

#SPJ11

Answer:

A survey found that 34% of the students spend time with your family eating dinner. Oh the 500 student surveyed, about how many spend time with their family eating dinner?

Step-by-step explanation:

If 34% of the students surveyed spend time with their family eating dinner, we can find the approximate number of students who do so by multiplying the percentage by the total number of students surveyed:

34% of 500 students = 0.34 x 500 = 170 students

Therefore, about 170 of the 500 students surveyed spend time with their family eating dinner.

If you can, give me brainliest please!

The value we obtain from the table will be subtracted from 1 to obtain the probability that we are looking for.P(z < 1.75) = 0.9599 (from the standard normal distribution table)Therefore, P(z ≥ 1.75) = 1 - P(z < 1.75) = 1 - 0.9599 = 0.0401.The probability that a randomly selected individual with the degree will get a starting salary of at least $34,375 is 0.0401, or 4.01%.

We have been given that the starting salaries of individuals with a certain degree are normally distributed with a mean of $30,000 and a standard deviation of $2,500.We are required to determine the probability that a randomly selected individual with the degree will get a starting salary of at least $34,375.

We know that the Z-score formula is given as:$$z=\frac{x-\mu}{\sigma}$$Where:x = Value for which we need to find the probability.μ = Mean of the distribution.σ = Standard deviation of the distribution.Using this formula, we can find the Z-score for the given data as follows:$$z=\frac{x-\mu}{\sigma}$$$$\frac{34,375-30,000}{2,500}=1.75$$Now, we can use the normal distribution table to find the probability of a Z-score being less than or equal to 1.75.

for such more questions on  standard deviation

https://brainly.com/question/475676

#SPJ11

The contrapositive of the zero product property is that if neither of the two real numbers is 0, then the product of the two numbers will not be 0. In plain language, this means that if neither of the two numbers are 0, then the product of the two numbers cannot be 0.

In an informal version, this can be stated as "if neither number is 0, then their product cannot be 0". This can be understood as "if neither number is 0, the result of multiplying them together cannot be 0". In other words, the product of two real numbers will not be 0 if neither of them is 0.

'cell '. The element in the second row and first column of the cell array C is accessed using the phrase c(2,1). The first element in the second row of C is the string "cell," which is that element.

The element in the second row and first column of the cell array C is accessible by the equation c(2,1). The first element in the second row of C is the string "cell," which makes up that element. The string "cell" is the result of c(2,1).

The curly braces in MATLAB are used to retrieve the contents of a cell array. "Access the contents of the cell in the second row and first column of C" is what the phrase C2,1 implies. The string in question is the outcome of the expression since it is present in the relevant cell.

learn more about array here:

https://brainly.com/question/14629487

#SPJ4

If the volume of a right triangular prism is 72 cubic feet, the area of the base is 2 square feet and the length of DF is approximately 2.83 feet.

To solve the problem, we can use the formula for the volume of a right triangular prism, which is:

Volume = (1/2) x base x height x length

where base is the area of the triangular base, height is the height of the prism, and length is the length of the prism.

We are given that the volume is 72 cubic feet and the height is 9 feet. Therefore, we can write:

72 = (1/2) x base x 9 x length

Simplifying this equation, we get:

base x length = 16

We are also given that the base is an isosceles right triangle. This means that the two legs of the triangle are equal, and the hypotenuse is equal to the length of one leg times the square root of 2.

Let's call the length of one leg of the triangle DF. Then, we can write:

base = (1/2) x DF x DF

Substituting this expression for base into the equation we derived earlier, we get:

(1/2) x DF x DF x length = 16

Simplifying this equation, we get:

DF x DF x length = 32

We know that the hypotenuse of the triangle is DF times the square root of 2. Since the hypotenuse is also one of the edges of the base of the prism, we can set it equal to the length of the prism:

DF x √(2) = length

Substituting this expression for length into the equation we derived earlier, we get:

DF x DF x DF x sqrt(2) = 32

Simplifying this equation, we get:

DF^3 = 16

Taking the cube root of both sides, we get:

DF = 2

Therefore, the area of the base is:

base = (1/2) x DF x DF = 2 square feet

And the length of DF is:

DF x √(2) = 2 x √(2) feet = approximately 2.83 feet.

To learn more about area click on,

https://brainly.com/question/3455913

#SPJ4

Answer:3 1 /20

Step-by-step explanation:= 1+3/4+1+3/10

Step-by-step explanation:

4x + y^2 + 2y =  - 5

4x = - y^2 -2y - 5          

4x = - (y^2 + 2y)   - 5      'complete the square' for y

4x = - ( y +1)^2   + 1    - 5

 x = - 1/4 ( y+1)^2  - 1             vertex is at -1, -1

-14x+2y^2-8y -20 = 0

14x = 2y^2 -8y-20

14x = 2 ( y^2 - 4y) - 20     complete the square for y

14x = 2(y-2)^2  -8 - 20

x = 1/7 ( y-2)^2 - 2                Vertex is at   -2 , 2

Answer:

Step-by-step explanation:

sorry I don't know

Leo might therefore have 36 or 48 toy soldiers, which is a choice between the two numbers.

The attempt to demonstrate that your integer is larger than anyone else's integer has persisted through the ages, despite their being more numbers than there are atoms in the universe. The largest number that is frequently used is a googolplex (10googol), which equals 101¹⁰⁰.

We'll name Leo's collection of toy soldiers "x" the amount. We are aware of:

We can infer x to be one of the following figures from the first condition: 28, 32, 36, 40, 44, 48, or 52.

To find out which of these integers meets the other two requirements, we can try each one individually:

x + 6 = 34 and x + 3 = 31, neither of which is a multiple of five, if x = 28.

X + 6 = 38 and X + 3 = 35, none of which is a multiple of 5, follow if x = 32.

When x = 36, x + 6 = 42, a multiple of 7, and x + 3 = 39, a multiple of 5, follow. This might be the answer.

x + 6 = 46 and x + 3 = 43, neither of which is a multiple of five, if x = 40.

x + 6 = 50 and x + 3 = 47, neither of which is a multiple of five, if x = 44.

When x = 48, x + 6 = 54, a multiple of 7, and x + 3 = 51, a multiple of 5, follow.

x + 6 = 58 and x + 3 = 55, neither of which is a multiple of five, if x = 52.

To know more about two numbers visit:-

https://brainly.com/question/1814627

#SPJ1

The rounded value of 25.71 to 2 decimal places is 25.71 itself.

To round 25.71 to 2 decimal places, we need to look at the third decimal place, which is 1.

If the third decimal place is 5 or greater, we round up the second decimal place. If the third decimal place is less than 5, we simply drop it and keep the second decimal place as is.

In this case, the third decimal place is 1, which is less than 5, so we simply drop it and keep the second decimal place as is. Therefore, 25.71 rounded to 2 decimal places is:

25.71 ≈ 25.71 (no rounding necessary)

So, the rounded value of 25.71 to 2 decimal places is 25.71 itself.

Learn more about decimal at https://brainly.com/question/703656

#SPJ1

Answer:

The largest knitting needle that the box can hold would have to fit inside the box diagonally from corner to corner.

Using the Pythagorean theorem, we can find the diagonal of the box:

d = sqrt(40^2 + 30^2 + 20^2)

d = sqrt(1600 + 900 + 400)

d = sqrt(2900)

d = 53.85 cm (rounded to two decimal places)

Therefore, the largest knitting needle that the box can hold would have a length of 53.85 cm or less.

The answer of the given question based on the finding the m∠QTS from a circle with the measure of minor arc the answer is the measure of angle ∠QTS is 60° degrees.

In geometry, arc is  portion of a curve or  circle. It is defined as the part of the curve that is contained between two points, called endpoints, on curve. The length of  arc is  fraction of the circumference of  circle, determined by the measure of  central angle that subtends it.

An arc is typically denoted by  two endpoints, with  small arc or arc symbol above the two letters. For example, an arc with endpoints A and B would be denoted as "⌒AB" or "AB".Arcs can be classified based on their measure or  position of their endpoints.

An arc with measure less than 180 degrees is called  minor arc, while an arc with measure greater than 180 degrees is called  major arc. An arc with measure equal to 180 degrees is called semicircle.

Since arc QS is a minor arc, we know that angle ∠QTS is half the measure of arc QS. Therefore, we have:

m∠QTS = (1/2) m arc QS

m∠QTS = (1/2) (120°) [Substituting the given value of m arc QS]

m∠QTS = 60°

Therefore, the measure of angle ∠QTS is 60° degrees.

To know more about Angle visit:

https://brainly.com/question/30162248

#SPJ1

The probability of producing the genotype AABBCC in a cross AaBbCc × AaBbCc is 1/64.

A Punnett square is a grid used to forecast the likelihood of an offspring of a mating between two parents with known genotypes. The grid consists of four boxes or cells with one parent's gamete genotype listed along the top, and the other parent's gamete genotype listed down the side.

To determine what proportion of their offspring will possess a certain genotype or phenotypic characteristic, the gamete genotypes are combined using the grid.

You can learn more about genotype at: brainly.com/question/29156144

#SPJ11

Therefore , the solution of the given problem of unitary method comes out to be V has a value of -13/3.

By using preexisting variables, this common convenience, or all essential components from the initial Bishop malleable study that adhered to a specific methodology, the objective may be accomplished. If the term affirmation result does not occur, both essential components will event miss the statement; however, if it does, it then becomes possible to reach the entity once more.

Here,

TU = 4v and QR = 5v plus 17 allow us to write:

=> QR = TU + UP + PS + SR + RQ

Inputting the numbers provided yields:

=> 5v + 17 =  4v + UP + v + 26 + SR + 5v plus

When we simplify the solution, we obtain:

=> UP + SR + 6v + 26 = 0

Because UP and SR are opposite and equivalent, we can write:

=> UP = -SR

By replacing this in the preceding solution, we obtain:

=> UP - UP + 6v + 26 = 0

When we simplify the solution, we obtain:

=> 6v + 26 = 0

26 is subtracted from both parts to yield:

=> 6v = -26

When we multiply both parts by 6, we get:

=> v = -26/6

If we simplify, we get:

=> v = -13/3

V therefore has a value of -13/3.

To know more about unitary method visit:

https://brainly.com/question/28276953

#SPJ1

Therefore, the difference in the price of 300 cm of ribbon between shop A and shop B is £1.20.

In mathematics, an equation is a statement that two expressions are equal. It usually contains one or more variables, which are typically represented by letters, and may contain constants and mathematical operations such as addition, subtraction, multiplication, division, exponents, and roots. An equation can be true or false depending on the values of the variables. Solving an equation means finding the values of the variables that make the equation true.

Here,

To find the difference in price between the two shops, we need to first calculate the cost per centimeter of ribbon for each shop:

Shop A: £1.68 / 140 cm = £0.012 per cm

Shop B: £1.72 / 215 cm = £0.008 per cm

Now, we can calculate the cost of 300 cm of ribbon at each shop:

Shop A: 300 cm x £0.012 per cm = £3.60

Shop B: 300 cm x £0.008 per cm = £2.40

The difference in price between the two shops for 300 cm of ribbon is:

£3.60 - £2.40 = £1.20

To know more about equation,

https://brainly.com/question/2228446

#SPJ1

The waterproof jackets that last five years offer the biggest savings, as they have a lower cost per jacket per year.

The cost curve, which in economics expresses production costs as a function of output. The loss function is a function that has to be minimised in mathematical optimization. A cost function evaluates how inaccurate the model is in estimating the connection between X and y.

Given that, cost of waterproof jackets that last for 5 years = $150 for 50 jackets.

Thus, cost of one jacket = 150/50 = $3.

The jacket lasts 5 years thus for 1 year the equivalent cost is:

3/5 = $0.60.

Now, for the other jacket:

Cost per year is = (80/50) / 2 = $0.80 per jacket per year.

Hence, the waterproof jackets that last five years offer the biggest savings, as they have a lower cost per jacket per year.

Learn more about cost here:

https://brainly.com/question/30045916

#SPJ1

The area's estimated snapping turtIe popuIation, rounded to the cIosest whoIe number, is 56.

That is correct! As 0 is a whoIe number and aII whoIe numbers were integers, 0 is additionaIIy an integer.

The LincoIn-Petersen index method, which is frequentIy empIoyed to determine the size of a popuIation using a capture-mark-recapture approach, can be utiIized to resoIve this issue.

The estimated popuIation (N) is equaI to (M x C) / R using the foIIowing formuIa:

M is the quantity of peopIe incIuded in the initiaI sampIe (marked turtIes)

C is the second sampIe's size (totaI number of turtIes caught in the second sampIe)

R is the quantity of marked peopIe who were Iocated again in the specimen.

When we enter the specified vaIues into the equation, we obtain:

N = (15 x 15) / 4

N = 56.25

The area's snapping turtIe popuIation is thought to be 56, rounded off to the cIosest whoIe number.

To know more about whole numbers, visit:

https://brainly.com/question/19161857

#SPJ1

The definition of vector space that fails is part A and B  because it does not satisfy the any property of vector space.

The following statement can be determined if at-least one part of vector space definition that fails as:

(a) A is not a vector space because it does not contain the zero vector.

The zero vector is the unique vector that satisfies the property that when it is added to any other vector in the space, the result is the original vector.

However, in this case, the [a1, b1] + [a2, b2] = [a1 - a2, b1 - b2] is 0x² + 1, which is not an element of A. Therefore, A fails to satisfy the requirement of having a zero vector, and it is not a vector space.

(b) B is not a vector space because it does not satisfy the distributive property of scalar multiplication over vector addition.

In general, scalar multiplication must distribute over vector addition, meaning that for any scalar a and any vectors u and v in the space, a(u+v) = au + av.

However, in B, the scalar multiplication is defined as usual for R², but the vector addition is defined differently. In particular,[a1, b1] + [a2, b2] = [a1 - a2, b1 - b2].

The vector space definition fails because the vector addition is not associative, and it is also not commutative, which are the first two conditions for vector spaces. Therefore, the first and second conditions of the definition are not met.

To learn more about the vector space:

https://brainly.com/question/11383

#SPJ11

Answer:

We know that, the sum of interior angles of an n-sided polygon is (n−2)×180⁰

For a pentagon, n=5

so,

[tex] \implies \rm \: 6x + 6y = (n - 2)180[/tex]

[tex] \implies \rm \: 6(x + y) = (5 - 2)180[/tex]

[tex] \implies \rm \: 6(x + y )= 3 \times 180[/tex]

[tex] \implies \rm \: (x + y) = \dfrac{3 \times 180}{6} [/tex]

[tex] \implies \rm \: (x + y) = \dfrac{ 3 \times \cancel{180} \: \:30}{ \cancel6} [/tex]

[tex] \rm \implies \: x + y = 90[/tex]

[tex] \underline{\boxed{\implies \rm \: y= 90 - x}}[/tex]

There are many formulas related to a pentagon. A few basic ones are given below.

Hunter bought 13.5 meters of tape in total

Hunter bought two rolls of tape

The first roll is 3.7 meters of tape

The second roll is 9.8 meters of tape

The total number of tape that Hunter bought can be calculated as follows

[tex]= 3.7 + 9.8=13.5[/tex]

Hence Hunter bought 13.5 meters of tape

Read more on meters here:

https://brainly.com/question/26097689

1) The area of a circle with a diameter of 1 m is approximately 0.7854 square meters.

2) The area of a circle with a diameter of 100 cm is approximately 7853.98 square centimeters.

3) The area of a circle with a radius of 100 cm is approximately 314159.27 square centimeters.

4) The area of a circle with a radius of 500 mm is approximately 785398.16 square millimeters.

The formula for the area of a circle is A = πr², where A is the area and r is the radius of the circle.

1) If the diameter of the circle is 1 m, then the radius is 0.5 m. Therefore, the area of the circle is:

A = πr² = π(0.5)² = π(0.25) ≈ 0.7854 square meters.

2) If the diameter of the circle is 100 cm, then the radius is 50 cm. Therefore, the area of the circle is:

A = πr² = π(50)² = π(2500) ≈ 7853.98 square centimeters.

3) If the radius of the circle is 100 cm, then the area of the circle is:

A = πr² = π(100)² = π(10000) ≈ 314159.27 square centimeters.

4) If the radius of the circle is 500 mm, then the area of the circle is:

A = πr² = π(500)² = π(250000) ≈ 785398.16 square millimeters.

Learn more about area here

brainly.com/question/28642423

#SPJ4

AE is classified as a chord.

A chord can be thought of as a piece of the circle that connects two points on the circle. The length of a chord depends on the distance between the two points it connects, as well as the size of the circle itself. The longest possible chord in a circle is the diameter, which is a chord that passes through the center of the circle and divides it into two equal halves.

A tangent line to a circle is a straight line that intersects the circle at exactly one point. This point of intersection is called the point of tangency. The tangent line is perpendicular to the radius of the circle at the point of tangency, and it lies in the same plane as the circle.

In the given question,

AE is passing through two points of the circumference of the circle and is also the diameter.

Hence, AE is the longest forming chord of the circle.

To know more about circles, visit:

https://brainly.com/question/29142813

#SPJ1

The explicit formula for the nth term of the sequence 16, 19, 22 is:

[tex]a_n = 16 + 3(n-1)[/tex]

What is an sequence ?

A sequence is an ordered list of numbers or other mathematical objects that follow a particular pattern. Each individual number or object in the sequence is called a term. The pattern that governs the sequence is usually defined by a rule or formula that determines how each term is related to the previous terms. Sequences can be finite or infinite, depending on whether there is a last term or not. They can also be arithmetic, geometric, or have more complicated patterns. The formula for the nth term of a sequence is typically derived from observing patterns or relationships among the given terms.

Finding the explicit formula for the given sequence :

To find the explicit formula for the given sequence 16, 19, 22, we can first observe that each term in the sequence is obtained by adding 3 to the previous term. That is, 19 = 16 + 3 and 22 = 19 + 3. This suggests that the sequence follows an arithmetic pattern, where each term is the sum of the first term and a multiple of a common difference d (in this case, d = 3) multiplied by the position of the term minus 1 (n-1).

Using this pattern, we can write the explicit formula as follows:

[tex]a_n = a_1 + d(n-1)[/tex], where [tex]a_1[/tex] is the first term and d is the common difference.

Plugging in the values for the first term and common difference in the given sequence, we get:

[tex]a_n = 16 + 3(n-1)[/tex]

Therefore, the explicit formula for the nth term of the sequence 16, 19, 22 is:

[tex]a_n = 16 + 3(n-1)[/tex]

To know more about sequence visit :

brainly.com/question/23668601

#SPJ1

Answer:

Step-by-step explanation:

To find the perimeter of an equilateral triangle is equalled to 3s.

35 x 3

105

The set [1 0 −3 , −3 1 6 , 1 −1 0] is not a basis for set of real numbers R cubed(ℝ3).

The reason why it is not a basis is because it is not linearly independent. However, the set does span set of real numbers R cubed(ℝ3).To determine if the given set is a basis for set of real numbers R cubed(ℝ3), we need to test for linear independence and for span.Linear independence

The given set is said to be linearly independent if and only if the only solution to the equation a[1 0 −3] + b[−3 1 6] + c[1 −1 0] = [0 0 0] is the trivial solution where a, b and c are constants.If the given set is linearly independent then it is a basis for R3; if it is not linearly independent, it is not a basis for R3.

SpanThe given set is said to span R3 if every vector in R3 can be written as a linear combination of vectors in the given set.

If the given set spans R3, then it can be considered a basis for R3.For us to test if the given set is linearly independent, we can form a matrix by placing the three given vectors into the columns of a 3 x 3 matrix as follows:[1 0 1] [−3 1 −1] [−3 6 0]

By expanding the determinant of the matrix above, we get: det(A) = 0 - 0 - (-3) = 3

Since the determinant is non-zero, we can say that the given set is linearly independent. Since the given set is linearly independent, we can then use it to span R3. Hence the given set does not form a basis for R3 but it is linearly independent and spans R3.

To know more about linearly independent click on below link:

https://brainly.com/question/30720942#

#SPJ11

Answer: 3/8

Step-by-step explanation:

Answer:

NO.2- SSA is not the method to show the congruency of two triangles.