NEED HELP ASAP
This composite figure is created by placing a sector of a circle on a rectangle. What is the area of this composite figure? Show you work

the triangles are similar, corresponding parts of the triangles are equal in measure. Thus, it is reasonable to conclude that [tex]AB ≅ DE.[/tex]

It is reasonable to conclude that [tex]AB ≅ DE[/tex]because triangles ABC and DEF are similar.

This means that corresponding parts of the two triangles are equal in measure. Specifically, ∠A and ∠D are equal in measure, as are ∠B and ∠E.

Therefore, the corresponding sides AB and DE are equal in measure.

A way to show that the two triangles are similar is by using the AA Similarity Postulate.

This postulate states that if two angles of one triangle are equal in measure to two angles of a second triangle, then the two triangles are similar. In this case, [tex]∠A ≅ ∠D and B ≅ ∠E[/tex], which means the two triangles are similar.

for such questions on triangles

https://brainly.com/question/17335144

#SPJ11

Answer:

A. x = -2 or x = 8

Good luck!!

Step-by-step explanation:

(x - 3) - 10 = -5

x - 3 = - 5 + 10

x - 3 = 5

x = 5 + 3

x = 8

(a) The eigenvalues of the coefficient matrix is  [-1,3]  and for λ=42, we get the eigenvector [1,5].

Itcan be found by solving the characteristic equation |A-λI|=0, where A is the coefficient matrix and λ is the eigenvalue. Solving for λ, we get λ=0 and λ=42.

o find the eigenvectors, we substitute each eigenvalue into the equation (A-λI)x=0 and solve for x. For λ=0, we get the eigenvector [-1,3]. For λ=42, we get the eigenvector [1,5].

(b) The solution is y(t) = c1e^(0t)[-1,3] + c2e^(42t)[1,5].

To find the real-valued solution to the initial value problem, we can use the eigenvectors and eigenvalues to diagonalize the coefficient matrix. We have A = PDP^-1, where P is the matrix whose columns are the eigenvectors and D is the diagonal matrix with the eigenvalues on the diagonal.

Using the initial condition y2(0) = 15, we can solve for the constants c1 and c2.

The solution is y(t) = c1e^(0t)[-1,3] + c2e^(42t)[1,5]. Solving for c1 and c2 using the initial condition, we get

y(t) = [-15e^(42t) + 3e^(0t), 15e^(42t) + 5e^(0t)].

For more questions like Equation click the link below:

https://brainly.com/question/29657983

#SPJ11

The Length of AB in square ABCD is 30 feet.

Since the squares ABCD and EFGH are similar, their corresponding sides are proportional, so we can set up the following relation:

AB/EF = 1/4

We can also use the fact that the ratio of the areas of two similar figures is equal to the square of the ratio of their corresponding sides. Therefore,

AB²/EF² = (Area of square ABCD)/(Area of square EFGH)

Substituting the given values:

AB²/EF² = (Area of square ABCD)/(14400)

Since the areas of squares are proportional to the square of their sides, we can write,

Area of square ABCD/Area of square EFGH = (AB/EF)²

Substituting this into the above equation and solving for AB, we get,

AB²/EF² = (AB/EF)²

AB² = (AB/EF)² * EF²

AB² = (1/4)² * 14400

AB² = 900

AB = 30 feet

Therefore, the length of the side AB of square ABCD is 30 feet.

Learn more about squares on

https://brainly.com/question/28776767?referrer=searchResults

#SPJ4

The correctness of the student's solution, we need to have the equations of the system.

A system of equations is graphed on the coordinate plane. A student concludes that the solution of the system is (-0.5, 1.5). Is this correct? Justify your response.To conclude that a system of equations has a solution in the coordinate plane, a set of ordered pairs (x, y) should satisfy both equations in the system of equations. That is, the system of equations should have a point (x, y) that is a solution of both equations.Only by testing the solution in the given system of equations can we know if the student's conclusion is correct. If the solution is satisfied by the system of equations, then the answer is true. Otherwise, it is false. However, since no system of equations is provided in the question, we cannot test the student's solution.To justify the correctness of the student's solution, we need to have the equations of the system.

Learn more about Correctness

brainly.com/question/20858106

#SPJ11

The abiotic factor that can prevent the organism from becoming preserved, AFTER it has been buried is groundwater.

An abiotic factor refers to a non-living component of an ecosystem that influences the survival and growth of living organisms.

Groundwater can cause the dissolution of minerals present in the sediment that encases the buried organism.

This process can lead to the destruction of the fossilized remains, as the minerals provide the framework for the preservation of the organism's hard parts (such as bones or shells).

Groundwater can also cause the erosion of the sediment, which can expose the buried remains and make them vulnerable to biotic factors such as scavengers, predators, and decomposers.

Predators and animals that eat bones, scavengers and plants that use the nutrients of fossils, and other animals of the same species as the organism that died are all biotic factors that can affect the preservation of the organism, but they do so before or during the burial process.

Learn more about abiotic factors on:

brainly.com/question/21333046

#SPJ1

The cat population in Catonsville in 2007 was 200. The answer is option B.

Population refers to the total number of people, animals, or objects in a particular group or area. It is the entire group or collection of individuals, things, or events that we are interested in studying or describing.

We can use the given equation to find the cat population at any given time in years since the beginning of 2010. However, to find the population in 2007, we need to make a conversion from years since the beginning of 2010 to years since the beginning of 2007.

From the beginning of 2007 to the beginning of 2010, there are 3 years, so if we subtract 3 from the number of years since the beginning of 2010, we will get the number of years since the beginning of 2007. Therefore, we need to substitute t = -3 into the given equation and solve for p:

[tex]p = 1600(2)^t\\p = 1600(2)^(-3)\\p = 1600(1/8)\\p = 200[/tex]

Therefore, the cat population in Catonsville in 2007 was 200. The answer is option B.

To know more about population visit:

https://brainly.com/question/27779235

#SPJ1

Answer:

Length = 53 feet

Width = 22 feet

Step-by-step explanation:

Perimeter = 2(length + width)

Then:

a = 2w + 9            Ec. 1

150 = 2(a + w)       Ec. 2

a = length

w = width

From Eq. 1:

a - 9 = 2w            Eq. 3

From Eq. 2:

150 = 2*a + 2*w

150 = 2a + 2w

150 - 2a = 2w        Eq. 4

Equalizing Eq. 3 and Eq. 4

a - 9 = 150 - 2a

a + 2a = 150 + 9

3a = 159

a = 159/3

a = 53

From Eq. 1:

a = 2w + 9

53 = 2w + 9

53 - 9 = 2w

44 = 2w

44/2 = w

w = 22

Check:

From Eq. 2

150 = 2(a+w)

150 = 2(53+22)

150 = 2*75

Answer:

83.6%

Step-by-step explanation:

Let's say the original price is x

x decreased by 12% means 88% of x is left.

0.88x decreased by 5% means 95% of 0.88x is left.

This means the answer is: 0.88x * 0.95 = 0.836

The percent of the total decrease is 83.6%

Hope this helps :)

Have a great day!

To perform matrix multiplication in MIPS, we can use nested loops to iterate over the rows and columns of the matrices.

The outer loop iterates over the rows of the first matrix, while the inner loop iterates over the columns of the second matrix. We then perform the dot product of the corresponding row and column, which involves multiplying the elements and summing the products.

To perform multiplication efficiently, we can use MIPS registers to store intermediate values and avoid accessing memory unnecessarily. We can also use assembly instructions like "lw" and "sw" to load and store values from memory, and "add" and "mul" to perform arithmetic operations.

In summary, matrix multiplication in MIPS involves nested loops, efficient use of registers and assembly instructions, and arithmetic operations.

For more questions like MIPS click the link below:

https://brainly.com/question/4196231

#SPJ11

In the following question, among the given options, the statement is said to be, The pooled estimate of the standard deviation for the data given is √(54.14^2/10 + 24.26^2/10) = 22.74.

According to the rule for examining standard deviations in ANOVA from Chapter 12 (page 560), the within-group standard deviation should be no more than twice the size of the between-group standard deviation. In this case, the between-group standard deviation is 44.85 and the within-group standard deviation (22.74) is less than twice the size of the between-group standard deviation, so it is reasonable to use a pooled standard deviation for the analysis of these data.

For more such questions on deviation

https://brainly.com/question/475676

#SPJ11

The expression 4 triangles to 16 squares when simplified is 1 triangle to 4 squares

Given that

4 triangles to 16 squares

When expressed as ratio, we have

Triangle : Square = 4 : 16

To simplify the ratio Triangle : Square = 4 : 16, we can divide both the numerator and denominator by their greatest common factor, which is 4.

So, we have

Triangle : Square = 4 : 16

Divide both sides by 4:

Triangle/4 : Square/4 = 1 : 4

So the simplified ratio is 1 : 4, which means for every one triangle, there are four squares.

Read more about ratio at

https://brainly.com/question/12024093

#SPJ1

The vector u2 is (0, √3/3, 2/3). It is a unit vector that is orthogonal to both 8,-8,8 and 0,5,5.

Given two vectors 8,-8,8 and 0,5,5, we need to find another unit vector that is orthogonal to both the given vectors. Let's call this vector u1.The vector u1 can be obtained by taking the cross product of the two given vectors:u1 = (8,-8,8) × (0,5,5)u1 = (-40,-40,40)

To get a unit vector, we need to normalize u1 by dividing it by its magnitude:|u1| = √((-40)² + (-40)² + 40²) = 60u1 = (-40/60, -40/60, 40/60) = (-2/3, -2/3, 1/3)Now we need to find another unit vector that is orthogonal to u1.

One way to do this is to take the cross product of u1 with another vector, and then normalize the result. We can choose any vector that is not parallel to u1. For example, we can choose the vector (1,0,0).u2 = u1 × (1,0,0)u2 = (-2/3, -2/3, 1/3) × (1,0,0)u2 = (0,1/3,2/3)

To get a unit vector, we need to normalize u2 by dividing it by its magnitude:|u2| = √(0² + (1/3)² + (2/3)²) = 1/√3u2 = (0, √3/3, 2/3)

Learn more about Unit Vector

brainly.com/question/30279109

#SPJ11

Answer: $22.50

Step-by-step explanation:

Let x be the cost per pound of the secret-formula coffee beans.

The total cost of the secret-formula beans is 12x dollars.

The total cost of the other beans is 15 × 18 = 270 dollars.

The total cost of the mix is (12 + 15) × 20 = 540 dollars.

Since the barista mixed 12 pounds of the secret-formula beans with 15 pounds of the other beans, the total weight of the mix is 12 + 15 = 27 pounds.

We can set up an equation based on the total cost of the mix:

12x + 270 = 540

Subtracting 270 from both sides:

12x = 270

Dividing both sides by 12:

x = 22.5

Therefore, the barista's secret-formula coffee beans cost $22.50 per pound.

When the minimum volume of a clown is 60,000 cm³ and the volume of a car is 3 million cm³, 55 is an upper bound on the maximum number of clowns that can fit in a car. The correct answer is Option A.

Bounds are the maximum and minimum limits that are permitted, within which something can or must be performed. Bounds are used to refer to an acceptable range of values that provide safe operation or performance. In mathematics, a set of bounds can define the limits of the amount of things or objects.

The minimum volume of a clown is 60,000 cm³, so to fit 55 clowns in a car we need:

55 clowns × 60,000 cm³/clown = 3,300,000 cm³

This is lower than the volume of the car. Therefore, 55 is an upper bound on the maximum number of clowns that can fit in the car.

Learn more about Bounds here: https://brainly.com/question/28725724

#SPJ11

Answer:

  10.309 in²/s

Step-by-step explanation:

Given A³ = 36πV² and V' = 18 in³/s, you want to know A' when A=153.24 in² and V=178.37 in³.

Using implicit differentiation, we have ...

  3A²·A' = 36π·2V·V'

  A' = (36π·2)/3·V/A²·V' = 24πV/A²·V'

  A' = 24π·(178.37 in²/(153.24 in²)²·18 in³/s

  A' ≈ 10.309 in²/s

The surface area is increasing at about 10.309 square inches per second.

__

Additional comment

There are at least a couple of ways a calculator can be used to find the rate of change. The first attachment shows evaluation of the expression we derived above. The second attachment shows the rate of change when the area is expressed as a function of the volume.

The result rounded to 5 significant figures is the same for both approaches.

The correct answer is option (C).

Sine (sin), cosine (cos), tangent (tan), cosecant (csc), secant (sec), and cotangent are the six functions (cot).

The equation t = Q - P, where Q and P are the specified locations, can be used to determine the components of the vector t. Therefore:

t = (–18, 2) – (–13, 11) = (–18 + 13, 2 – 11) = (–5, –9) (–5, –9)

The vector's magnitude is given by:

|t| = √(–5)^2 + (–9)^2 = √106 ≈ 10.296

The formula = tan1 (y/x), where x and y are the vector's components, can be used to determine the direction of the vector t. The direction must be expressed in terms of sine and cosine functions because we are required to represent the vector in trigonometric form.

θ = tan⁻¹ (–9/–5) ≈ 60.945°

In trigonometric form, the vector t is thus represented as follows:

t = [t|cos|i] + [t|sin|j]

We get the following by altering the values of |t| and:

t = 10.296 cos I + 10.296 sin j of angle 60.945

As a result, the following is the proper trigonometric representation of the vector t:

t = 10.296 cos I + 10.296 sin j of angle 60.945

Thus, alternative is the right response (C).

To know more about Trignometric visit:

https://brainly.com/question/29076920

#SPJ1

Answer:

To find the population in the year 2001, we need to work backwards from the given population of 54,000 in 2003.

Let P be the population in the year 2001. From 2001 to 2003, there are two years, during which the population grows at a rate of 5% per annum. We can calculate the population in 2003 using the formula:

P * (1 + r)^n = 54,000

where r is the annual growth rate (5% or 0.05) and n is the number of years (2). Plugging in the values, we get:

P * (1 + 0.05)^2 = 54,000

Simplifying the equation, we get:

P = 54,000 / (1.05)^2

P = 48,543 (rounded to the nearest whole number)

Therefore, the population in the year 2001 was approximately 48,543.

To find the population in the year 2005, we can use the same formula with n = 2 + 2 = 4 (since we want to find the population four years after 2001):

P * (1 + 0.05)^4 = ?

Plugging in the value of P we just found, we get:

48,543 * (1 + 0.05)^4 = 60,723 (rounded to the nearest whole number)

Therefore, the population in the year 2005 would be approximately 60,723

(please could you kindly mark my answer as brainliest )

Answer:

To find out how much Gary's backpack will weigh with the math and science textbooks in it, we need to add the weight of the textbooks to the weight of the backpack:

Total weight = backpack weight + math textbook weight + science textbook weight

Total weight = 1.2 + 3.75 + 2.85

Total weight = 7.8 pounds

Therefore, Gary's backpack will weigh 7.8 pounds with the math and science textbooks in it.

Answer: His backpack will weigh 7.8 pounds

Step-by-step explanation:

Gary's backpack already weights 1.2 pounds without the science and math textbook, now we add the weights of both the math and science textbook.

1.2 + 3.75 = 4.95

4.95 is the weight with only his math textbook in his bag

now we add the science textbooks weight to 4.95

4.95 + 2.85 = 7.8

7.8 is the weight of his backpack with both his science and math textbook in his bag

Keenan's z-score is 0.71, rounded to the nearest hundredth.

The z-score measures how many standard deviations an individual's score is from the mean, and can be calculated using the formula:

z = (x - μ) / σ

where x is the individual's score, μ is the mean score, and σ is the standard deviation.

For Keenan's exam:

z = (80 - 77) / 4.2

z = 0.71

Therefore, Keenan's z-score is 0.71, rounded to the nearest hundredth.

Rounding to the nearest hundredth means the rounding of any decimal number to its nearest hundredth value. In decimal, hundredth means 1/100 or 0.01. For example, the rounding of 2.167 to its nearest hundredth is 2.17.

To know more about nearest hundredth, visit: brainly.com/question/809709

#SPJ4

a.

There are 15,504 ways to choose 20 batteries from the given types.

b.

there are 18,564 ways to choose 20 batteries such that at least four of them are 9-volt batteries.

To choose 20 batteries from the given 5 types (aaa, aa, c, d, and 9-volt), we can use the combination formula and is given by:

nCr = n! / (r! * (n-r)!)

5C20 = 5! / (20! * (5-20)!) = 15,504

there are 15,504 ways to choose 20 batteries from the given types.

b. To choose 20 batteries such that at least four of them are 9-volt batteries, we employ the method:

First, we choose four 9-volt batteries out of the total number of 9-volt batteries, which is 1.

we then need to choose the remaining 16 batteries from the remaining 4 types (aaa, aa, c, and d), while making sure that we don't choose any 9-volt batteries.

Applying the combination formula, with n = 4 and r = 16:

4C16 = 4! / (16! * (4-16)!) = 18,564

Therefore, the total number of ways to choose 20 batteries such that at least four of them are 9-volt batteries is:

1 * 18,564 = 18,564

Learn more about combination formula at:

https://brainly.com/question/11732255

#SPJ1

The answer to the question is 334 kittens.

Given that a cat gave birth to 333 kittens who each had a different mass between 147 g and 159 g. Then the cat gave birth to a 4th kitten with a mass of 57 g.

First of all, we will find out the range of the mass of kittens. The range is given as follows;Range = Maximum Value - Minimum Value Range = 159 g - 147 g Range = 12 g

Now, the cat gave birth to a 4th kitten with a mass of 57 g, we can say that the minimum value of kitten's mass is 57 g.So, the maximum value of kitten's mass can be calculated as follows;Maximum Value = 57 g + Range Maximum Value = 57 g + 12 g Maximum Value = 69 g Now, we can say that all kittens with a mass of 69 g or less would be born because the minimum value of kitten's mass is 57 g and the range of mass is 12 g.

Therefore, the answer to the question is 334 kittens.

Learn more about Range

brainly.com/question/28135761

#SPJ11

The three examples of contracts are:

Contracts are legal agreements between two or more parties that involve the exchange of goods, services, or money. They can be classified as unilateral or bilateral, express or implied, executed or executory.

Here are three examples of contracts that a person can be a part of:

To know more about the "contracts":https://brainly.com/question/5746834

#SPJ11

The given expression is

[tex]15 + c = 17.50[/tex]

We can use this expression to model the cost for a service.

Let's say that your gardener charges an initial amount of $15, and an additional per hour. If the gardener worked only for one hour, and the total cost charged was $17.50, how much was the additional cost?

So, the given expression models this real life situation, we can answer the problem by just solving the equation for [tex]c[/tex]

[tex]15 + c = 17.50[/tex]

[tex]c=17.50-15[/tex]

[tex]c=2.50[/tex]

Answer: Well C equals 2.5. You could use...

You have 3 sticks. one stick is 15 inches long and the other is 17.50. You want to get a small stick to add to the first one so that the first and last stick is equal to the 2nd stick.  C is the third stick.  15+C = 17.50. What is the length of C?

Step-by-step explanation:

EASY

Move all terms not containing C to the right side of the equation. C = 2.5

Answer:

To find the point that partitions the line segment AB in a ratio of 1:3, we can use the following formula:

P = (3B + 1A) / 4

where P is the point that partitions the line segment in a ratio of 1:3, A and B are the endpoints of the line segment, and the coefficients 3 and 1 represent the ratio of the segment we are dividing.

Substituting the values, we get:

P = (3*(-1, -5) + 1*(-5, 3)) / 4

P = (-3, -7)

Therefore, the point that partitions the line segment AB in a ratio of 1:3 is (-3, -7).

Step-by-step explanation:

The option in the question that is equivalent to 3/8 is 2/5.

We can simplify 3/8 and 2/5 so that they have a common denominator:

3/8 = 3*(5/5)/(85/5) = 15/40

2/5 = 2(8/8)/(5*8/8) = 16/40

Since 15/40 and 16/40 have the same denominator, we can compare their numerators to see which is larger:

15/40 < 16/40

Since 16/40 is larger, we can conclude that 2/5 is greater than 3/8.

Therefore, the option that is equivalent to 3/8 is 2/5.

Learn more about  equivalent at https://brainly.com/question/2972832

#SPJ1

As per the given APR, the sum of amount after 18 years is $66,373. 60, and the total deposits made over the time period is  $43,200. (option d).

To calculate this, we can use the formula for future value of an annuity:

FV = PMT x (((1 + r)⁻¹) / r)

where FV is the future value, PMT is the monthly payment, r is the monthly interest rate (which is calculated by dividing the APR by 12), and n is the number of payments (which is 18 x 12 = 216 in this case).

Plugging in the numbers, we get:

FV = $200 x (((1 + 0.045/12)²¹⁶ - 1) / (0.045/12)) = $66,373.60

Therefore, you would have approximately $66,373.60 in your investment plan after 18 years.

Now let's compare this amount to the total deposits made over the time period. In this case, the total deposits would be:

$200 x 12 x 18 = $43,200

Hence the correct option is (d).

To know more about APR here

https://brainly.com/question/14184570

#SPJ4

In Bitcoin, when a merchant waits for n confirmation of a payment transaction before providing the product, there is a risk of a double-spend attack. In this situation, the network is aware of a branch crediting the merchant, which has n blocks on top of the one in which the fork started.

      By simulating m as a negative binomial variable, P(m) = (m + n - 1m)pnqm can be used to more precisely compute this probability for a given value of m.

           The attacker, on the other hand, has a branch with only m additional blocks. If we assume the honest network and the attacker have a proportion of p and q of the total network hash power, respectively, the probability of the attacker catching up when he is currently z blocks behind is given by az = paz+1 + qaz−1, where a is a constant.

          To calculate the probability more accurately, we can model m as a negative binomial variable.

          This is the number of successes (blocks found by the attacker) before n failures (blocks found by the honest network), with a probability q of success.

          The probability for a given value m is then given by P(m) = (m + n - 1m)pnqm.

         Thus, when dealing with a double-spend attack in Bitcoin, the probability that the attacker will be able to catch up is given by az = paz+1 + qaz−1, where a is a constant.

              This probability can be more accurately calculated by modeling m as a negative binomial variable, with the probability for a given value m given by P(m) = (m + n - 1m)pnqm.

Learn more about Bitcoin merchant transaction probability at: https://brainly.com/question/29435409

#SPJ11