What is the pH of a solution with a hydrogen ion concentration of 2.0x10^3.(Use 3 digits)

Answer:

See the answer below

Explanation:

After seeing an object on a slide at the low-power objective of the microscope and it disappears on changing to high power, the following can be done to resolve the problem

1. Drop a few drops of immersion oil on the slide and view again under high the power objective.

2. If the object is still not visible after the action above, return the microscope to the low-power objective and make sure the object is refocused and centered. Then carefully change back to the high power objective and use the fine adjustment to bring it into focus.

Answer:

T = 13.25°C

Explanation:

From the law of conservation of energy:

Heat Lost by Watermelon = Heat Gained by Cans

[tex]m_wC_w\Delta T_w = m_cC_c\Delta T_c[/tex]

where,

[tex]m_w[/tex] = mass of watermelon = 6.48 kg

[tex]m_c[/tex] = mass of cans = (12)(0.35 kg) = 4.2 kg

[tex]C_w[/tex] = specific heat capacity of watermelon = 3800 J/kg.°C

[tex]C_c[/tex]  = specific heat capacity of cans = 4200 J/kg.°C

[tex]\Delta T_w[/tex] = Change in Temprature of watermelon = 29.4°C - T

[tex]\Delta T_c[/tex] = Change in Temperature of cans = T - 3.78°C

T = final temperature = ?

Therefore,

[tex](4.2\ kg)(3800\ J/kg.^oC)(29.4^oC-T)=(6.48\ kg)(4200\ J/kg^oC)(T-3.78^oC)\\469224\ J-(15960\ J/^oC)T = (27216\ J/^oC)T-102876.48\ J\\469224\ J + 102876.48\ J = (27216\ J/^oC)T+(15960\ J/^oC)T\\\\T = \frac{572100.48\ J}{43176\ J/^oC}[/tex]

T = 13.25°C

Answer:

Answer: Think its true

Answer:

C

Explanation:

20 cm = 0.2m

since uncertainty is 0.1 cm (0.001 m), should be recorded to same number of decimal place as uncertainty

therefore it's 0.200m

Answer:

Myopia curvature of the cornea if it is negative the curvatures are positive,

hypermetry,

Explanation:

Myopia is the visual defect that does not allow to see distant objects, which is why it is corrected with a divergent lens so that the image is formed on the retina, therefore, by reforming the curvature of the cornea if it is negative

therefore the curvature must decrease

To correct hypermetry, the curvatures are positive, consequently the curvature of the lens must increase

Answer:

8m/s

Explanation:

Vavg= 16-0/2=8m/s

Answer:

A(predicts an organisms ability to adapt to its enviroment, it is not a fact that each organization can adapt)

Explanation:

Answer:

7772.72N

Explanation:

When u draw your FBD, you realize you have 3 forces (ignore the force the car produces), gravity, normal force and static friction. You also realize that gravity and normal force are in our out of the page  (drawn with a frame of reference above the car). So that leaves you with static friction in the centripetal direction.

Now which direction is the static friction, assume that it is pointing inward so

Fc=Fs=mv²/r=1900*15²/55=427500/55=7772.72N

Since the car is not skidding we do not have kinetic friction so there can only be static friction. One reason we do not use μFn is because that is the formula for maximum static friction, and the problem does not state there is maximum static friction.

Answer:

True

Explanation:

A magnetohydrodynamic drive or MHD accelerator is a method which is used for propelling the vehicles using only by applying the electric and magnetic fields. It has no moving parts. It accelerates an electrically conductive propellant (liquid or gas) with magnetohydrodynamics.

Its working principle is same as an electric motor except that in an MHD drive, the moving rotor is replaced by the fluid acting directly as the propellant.

An MHD accelerator is reversible.

So,  the statement is true.

Answer:

686.7N

Explanation:

Given data

Mass= 70kg

We know that the buoyant force experienced by the person is equal to the weight of the person

Hence the weight is

Weight = mass* Acceleration

Weight= 70*9.81

Weight= 686.7N

Therefore the weight is 686.7N

Let the point where A is launched act as the origin, so that the horizontal positions at time t of the respective projectiles are

• A : x = (19.5 m/s) cos(30°) t

• B : x = 62.2 m + (19.5 m/s) cos(60°) t

These positions are the same at the moment one projectile is directly above the other, which happens for time t such that

(19.5 m/s) cos(30°) t = 62.2 m + (19.5 m/s) cos(60°) t

Solve for t :

(19.5 m/s) (cos(30°) - cos(60°)) t = 62.2 m

t = (62.2 m) / ((19.5 m/s) (cos(30°) - cos(60°))

t ≈ 8.71 s

Answer:

Power = 576 Watts

Explanation:

The electrical power of an electric circuit can be defined as a measure of the rate at which energy is either produced or absorbed in the circuit.

Mathematically, electrical power is given by the formula;

[tex] Electrical \; power = current * voltage [/tex]

This ultimately implies that, the quantity (current times voltage ) is electrical power and it is measured (S.I units) in Watt (W).

Given the following data;

Resistance = 100 ohms

Voltage = 240 V

To find the power rating of the heater;

Power = V²/R

Where;

V is the voltage.

R is the resistance.

Substituting into the formula, we have;

Power = 240²/100

Power = 57600/100

Power = 576 Watts

Answer:

2.80N/m

Explanation:

Given data

mass m= 56kg

perios T= 11.2s

The expression for the period is given as

T=2π√m/k

Substitute

11.2= 2*3.142*√56/k

square both sides

11.2^2= 2*3.142*56/k

125.44= 351.904/k

k=351.904/125.44

k= 2.80N/m

Hence the spring constant is 2.80N/m

Answer:

Hence the amount of heat transfer is 918.75 Btu.

Explanation:

Now,

Answer:

It is a example of physical change

Answer:

A - 5

B - 1

C - 4

D -2

Explanation:

I don't have one i just know...

The fire blanket is a tightly woven fabric. The spill containment kit consists of absorbent material. Fire extinguishers control small fires and the safety data sheet provides chemical, health, and safety information.

(a) The fire blanket is a blanket, which may be quickly thrown over a fire to snuff out the flames, and comprises fire-resistant materials.

Hence, option (a) matches with option (5)

(b) In order to contain a chemical spill, absorbent items like pads, socks, or booms are frequently included in spill containment kits.

Hence, option (b) correctly matches with option (1).

(c) A fire extinguisher is a tool used to put out small fires during emergencies.

Hence, option (c) correctly matches with option (4).

(d) A Safety Data Sheet (SDS) gives in-depth details regarding a specific chemical or chemical mixture. It provides information about the physical characteristics of the chemical, any potential risks, safe handling and storage practices, emergency response strategies, and more.

Hence, option (d) correctly matches option (2).

To learn more about Fire extinguishers, here:

https://brainly.com/question/3905469

#SPJ6

Answer:

changing the N to S. that's how the error will be corrected

Answer:

C is the correct answer

Explanation:

i took the test

Answer:

The tension in the second string is 226.7 N.

Explanation:

Length is L, mass per unit length = m

T = 510 N

Let the tension in the second string is T'.

second harmonic of the first string = third harmonic of the second string

[tex]2 f = 3 f'\\\\2\sqrt{\frac{T}{m}} = 3 \sqrt {\frac{T'}{m}}\\\\4 T = 9 T'\\\\4\times 510 = 9 T'\\\\T' = 226.7 N[/tex]

Answer:

Explanation:

Friction can be defined as a force that resists the relative motion of two objects when there surface comes in contact. Thus, it prevents two surface from easily sliding over or slipping across one another. Also, friction usually reduces the efficiency and mechanical advantage of machines but can be reduced through lubrication.

Generally, there are four (4) main types of friction and these includes;

I. Static friction.

II. Rolling friction.

III. Sliding friction.

IV. Fluid friction.

(a) As it gets compressed by a distance x, the spring does

W = - 1/2 (52.1 N/m) x ²

of work on the object (negative because the restoring force exerted by the spring points in the opposite direction to the object's displacement). By the work-energy theorem, this work is equal to the change in the object's kinetic energy. At maximum compression x, the object's kinetic energy is zero, so

W = ∆K

- 1/2 (52.1 N/m) x ² = 0 - 1/2 (0.250 kg) (1.70 m/s)²

==>   x ≈ 0.118 m

(b) Taking friction into account, the only difference is that more work is done on the object.

By Newton's second law, the net vertical force on the object is

∑ F = n - mg = 0

where n is the magnitude of the normal force of the track pushing up on the object. Solving for n gives

n = mg = 2.45 N

and from this we get the magnitude of kinetic friction,

f = µn = 0.120 (2.45 N) = 0.294 N

Now as the spring gets compressed, the frictional force points in the same direction as the restoring force, so it also does negative work on the object:

W (friction) = - (0.294 N) x

W (spring) = - 1/2 (52.1 N/m) x ²

==>   W (total) = W (friction) + W (spring)

Solve for x :

- (0.294 N) x - 1/2 (52.1 N/m) x ² = 0 - 1/2 (0.250 kg) (1.70 m/s)²

==>   x ≈ 0.112 m

For the 0.250 kg object moving along a horizontal track and collides with and compresses a light spring, with a spring constant of 52.1 N/m, we have:

a) The spring's maximum compression when the track is frictionless is 0.118 m.

b) The spring's maximum compression when the track is not frictionless, with a coefficient of kinetic friction of 0.120 is 0.112 m.

a) We can calculate the spring's compression when the object collides with it by energy conservation because the track is frictionless:

[tex] E_{i} = E_{f} [/tex]

[tex] \frac{1}{2}m_{o}v_{o}^{2} = \frac{1}{2}kx^{2} [/tex]  (1)

Where:

[tex]m_{o}[/tex]: is the mass of the object = 0.250 kg

[tex]v_{o}[/tex]: is the velocity of the object = 1.70 m/s

k: is the spring constant = 52.1 N/m

x: is the distance of compression

After solving equation (1) for x, we have:

[tex] x = \sqrt{\frac{m_{o}v_{o}^{2}}{k}} = \sqrt{\frac{0.250 kg*(1.70 m/s)^{2}}{52.1 N/m}} = 0.118 m [/tex]

Hence, the spring's maximum compression is 0.118 m.

b) When the track is not frictionless, we can calculate the spring's compression by work definition:

[tex] W = \Delta E = E_{f} - E_{i} [/tex]

[tex] W = \frac{1}{2}kx^{2} - \frac{1}{2}m_{o}v_{o}^{2} [/tex]   (2)

Work is also equal to:

[tex] W = F*d = F*x [/tex]     (3)

Where:  

F: is the force

d: is the displacement = x (distance of spring's compression)  

The force acting on the object is given by the friction force:

[tex] F = -\mu N = -\mu m_{o}g [/tex]   (4)

Where:

N: is the normal force = m₀g

μ: is the coefficient of kinetic friction = 0.120

g: is the acceleration due to gravity = 9.81 m/s²

The minus sign is because the friction force is in the opposite direction of motion.

After entering equations (3) and (4) into (2), we have:

[tex]-\mu m_{o}gx = \frac{1}{2}kx^{2} - \frac{1}{2}m_{o}v_{o}^{2}[/tex]

[tex]\frac{1}{2}kx^{2} - \frac{1}{2}m_{o}v_{o}^{2} + \mu m_{o}gx = 0[/tex]

[tex] \frac{1}{2}52.1 N/m*x^{2} - \frac{1}{2}0.250 kg*(1.70)^{2} + 0.120*0.250 kg*9.81 m/s^{2}*x = 0 [/tex]        

Solving the above quadratic equation for x

[tex] x = 0.112 m [/tex]  

Therefore, the spring's compression is 0.112 m when the track is not frictionless.

Read more here:

I hope it helps you!  

Answer:

Atmospheric pressure at Badwater is 1.01022 atm

Explanation:

Data given:

1 atmospheric pressure (Pi) = 1.01 * 10[tex]^{5}[/tex] Pa

Elevation (h) = 86m

gravity (g) = 9.8 m/s2

Density of air P = 1.225 kg/m3

Therefore pressure at bad water Pb = Pi + Pgh

Pb = (1.01 * 10[tex]^{5}[/tex]) + (1.225 * 9.8 * 86)

Pb = (1.01 * 10[tex]^{5}[/tex]) + 1032.43 = 102032 Pa

hence:

Pb = 102032 /1.01 * 10[tex]^{5}[/tex] = 1.01022 atm

Answer:

(b)

Explanation:

The voltage always lags the current by 90°, regardless of the frequency.

Answer:

Torques must balance

F1 * X1 = F2 * Y2

or M1 g X1 = M2 g X2

X2 = M1 / M2 * X1 = 130.4 / 62.3 * 10.7

X2 = 22.4 cm

Torque = F1  * X2 =

62.3 gm* 980 cm/sec^2  * 22.4 cm = 137,000 gm cm^2 / sec^2

Normally x cross y   will be out of the page

r X F  for F1 will be into the page so the torque must be negative

Answer:

stationary waves are transverse waves

Answer:

Nonrenewable energy

Explanation:

Renewable energy is also known as clean energy and it can be defined as a type of energy that are generated through natural sources or technology-based processes that are replenished constantly. Some examples of these natural sources are water (hydropower), wind (wind energy), sun (solar power), geothermal, biomass, waves etc.

Basically, a renewable energy source is sustainable and as such can not be exhausted.

On the other hand, a non-renewable energy refers to an energy source such as fossil fuels that takes a very long time to be created or their creation happened long ago and isn't likely to happen again e.g uranium.

For example, fossil fuels such as coal, oil, and natural gas, come from deep inside the Earth where they formed over millions of years ago.

In this scenario, the kind of energy the newspaper sources are talking about is a nonrenewable energy source because they are capable of being exhausted in the not-so-distant future.

Answer:

the pressure exerted by the object is 392,000 N/m²

Explanation:

Given;

mass of the object, m = 8 kg

area of your finger, A = 2 cm² = 2.0 x 10⁻⁴ m²

acceleration due to gravity, g = 9.8 m/s²

The pressure exerted by the object is calculated as;

[tex]Pressure = \frac{F}{A} = \frac{mg}{A} = \frac{8 \times 9.8}{2\times 10^{-4}} = 392,000 \ N/m^2[/tex]

Therefore, the pressure exerted by the object is 392,000 N/m²

The question is incomplete. The complete question is :

A mass is attached to the end of a spring and set into oscillation on a horizontal frictionless surface by releasing it from a compressed position. The record of time is started when the oscillating mass first passes through the equilibrium position, and the position of the mass at any time is described by x = (4.7 cm)sin[(7.9 rad/s)πt].

Determine the following:

(a) frequency of the motion

(b) period of the motion

(c) amplitude of the motion

(d) first time after t = 0  that the object reaches the position x = 2.6 cm

Solution :

Given equation : x = (4.7 cm)sin[(7.9 rad/s)πt].

Comparing it with the general equation of simple harmonic motion,

 x = A sin (ωt + Φ)

  A = 4.7 cm

  ω = 7.9 π

a). Therefore, frequency, [tex]$f=\frac{\omega}{2 \pi}$[/tex]

                                             [tex]$=\frac{7.9 \pi}{2 \pi}$[/tex]

                                             = 3.95 Hz

b). The period, [tex]$T=\frac{1}{f}$[/tex]

                        [tex]$T=\frac{1}{3.95}[/tex]

                            = 0.253 seconds

c). Amplitude is A = 4.7 cm

d). We have,

    x = A sin (ωt + Φ)

    [tex]$x_t=4.7 \sin (7.9 \pi t)$[/tex]

    [tex]$2.6 = 4.7 \sin (7.9 \pi t)$[/tex]

     [tex]$\sin (7.9 \pi t) = \frac{26}{47}$[/tex]

     [tex]$7.9 \pi t = \sin^{-1}\left(\frac{26}{47}\right)$[/tex]

          Hence, t = 0.0236 seconds.

Answer:

15cm

Explanation:

Since the lens is a diverging lens, the image distance is negative (virtual)

v = -30cm

u = 10cm

Required

focal length f

Using the lens formula;

1/u + 1/v = 1/u

1/10 - 1/30 = 1/f

(3-1)/30 = 1/f

2/30 = 1/f

f = 30/2

f = 15cm

Hence the focal length of the lens is 15cm

Answer:

a)  [tex]F_p=882N[/tex]

b)  [tex]P=4410W[/tex]

c)  [tex]V_p'=24135[/tex] ,[tex]n=15.2\%[/tex]

Explanation:

From the question we are told that:

Mass [tex]M=1500kg[/tex]

Velocity [tex]v=4.9m/s[/tex]

Coefficient of Rolling Friction [tex]\mu=0.06[/tex]

a)

Generally the equation for The Propulsion Force is mathematically given by

 [tex]F_p=\mu*mg[/tex]

 [tex]F_p=0.06*1500*9.81[/tex]

 [tex]F_p=882N[/tex]

b)

Therefore Power Required at

 [tex]V_p=5.0m/s[/tex]

 [tex]P=F_p*V_p[/tex]

 [tex]P=882*5[/tex]

 [tex]P=4410W[/tex]

c)

 [tex]V_p' =15mpg[/tex]

 [tex]V_p'=15*\frac{1609}[/tex]

 [tex]V_p'=24135[/tex]

Generally the equation for Work-done is mathematically given by

 [tex]W=F_p*V_p'[/tex]

 [tex]W=882*15*1609[/tex]

 [tex]W=2.13*10^7[/tex]

Therefore

Efficiency

 [tex]n=\frac{W}{E}*100\%[/tex]

Since

Energy in one gallon of gas is

 [tex]E=1.4*10^8J[/tex]

Therefore

 [tex]n=\frac{2.1*10^7}{1.4*10^8}*100\%[/tex]

 [tex]n=15.2\%[/tex]

The image is missing and so i have attached it.

Answer:

A) E = 8740 N/C

B) E = -6536 N/C

Explanation:

The formula for electric field is;

E = kq/r²

Where;

q is charge

k is a constant with value 8.99 x 10^(9) N•m²/C²

A) Now, to find the net electric field at point A, the formula would now be;

E = (kq1/(r1)²) - (kq2/(r2)²)

Where;

r1 is distance from charge q1 to point A

r2 is distance from charge q2 to point A.

q1 = -6.25 nC = -6.25 × 10^(-9) C

q2 = -12.5 nC = -12 5 × 10^(-9) C

From the attached image, r1 = 25 cm - 10 cm = 15 cm = 0.15 m

r2 = 10 cm = 0.1 m

Thus;

E = (8.99 x 10^(9)) × ((-6.25 × 10^(-9))/0.15^(2)) - ((-12.5 × 10^(-9))/0.1^(2))

E = 8740 N/C

B) similarly, electric field at point B;

E = (kq1/(r1)²) + (kq2/(r2)²)

Where;

r1 is distance from charge q1 to point B

r2 is distance from charge q2 to point B.

q1 = -6.25 nC = -6.25 × 10^(-9) C

q2 = -12.5 nC = -12 5 × 10^(-9) C

From the attached image, r1 = 10 cm = 0.1 m

r2 = 25cm + 10 cm = 35 cm = 0.35 m

Thus;

E = (8.99 x 10^(9)) × ((-6.25 × 10^(-9))/0.1^(2)) + ((-12.5 × 10^(-9))/0.35^(2))

E = -6536 N/C