What is the magnitude of the applied electric field inside an aluminum wire of radius 1.4 mm that carries a 4.5-A current

Answers

Answer 1

Answer:

Explanation:

From the question we are told that

    The radius is  [tex]r = 1.4 \ mm = 1.4 *10^{-3} \ m[/tex]

     The  current is  [tex]I = 4.5 \ A[/tex]

Generally the electric field is mathematically represented as

         [tex]E = \frac{J}{\sigma }[/tex]

Where [tex]\sigma[/tex] is the conductivity of  aluminum with value [tex]\sigma = 3.5 *10^{7} \ s/m[/tex]

J is the current density which mathematically represented as  

      [tex]J = \frac{I}{A}[/tex]

Here A is the cross-sectional area which is mathematically represented as  

       [tex]A = \pi r^2[/tex]

       [tex]A = 3.142 * (1.4*10^{-3})^2[/tex]

       [tex]A = 6.158*10^{-6} \ m^2[/tex]

So

    [tex]J = \frac{ 4.5 }{6.158*10^{-6}}[/tex]

    [tex]J = 730757 A/m^2[/tex]

So

       [tex]E = \frac{ 730757}{3.5*10^{7} }[/tex]

       [tex]E = 0.021 \ N/C[/tex]


Related Questions

You need to repair a broken fence in your yard. The hole in your fence is
around 3 meters in length and for whatever reason, the store you go to
has oddly specific width 20cm wood. Each plank of wood costs $16.20,
how much will it cost to repair your fence? (Hint: 1 meter = 100 cm) *

Answers

Answer:

 cost = $ 243.00

Explanation:

This exercise must assume that it uses a complete table for each piece, we can use a direct ratio of proportions, if 1 table is 0.20 m wide, how many tables will be 3.00 m

                 #_tables = 3 m (1 / 0.20 m)

                #_tables = 15 tables

Let's use another direct ratio, or rule of three, for cost. If a board costs $ 16.20, how much do 15 boards cost?

              Cost = 15 (16.20 / 1)

              cost = $ 243.00

A body is thrown vertically upwards with a speed of 95m / s and after 7s it reaches its maximum height. How fast does it reach its maximum height? What was the maximum height reached?

Answers

Explanation:

u = 95 m/sec ( Initial speed)

t = 7 sec ( Time of ascent)

According to Equations of Motion :

[tex]s = ut - \frac{1}{2} g {t}^{2} [/tex]

Max. Height = 95 * 7 - 4.9 * 49 = 424. 9 = 425 m

Answer:

332.5 m

Explanation:

At the maximum height, the velocity is 0.

Given:

v₀ = 95 m/s

v = 0 m/s

t = 7 s

Find: Δy

Δy = ½ (v + v₀) t

Δy = ½ (0 m/s + 95 m/s) (7 s)

Δy = 332.5 m

An electron is accelerated from rest through a potential difference. After acceleration the electron has a de Broglie wavelength of 880 nm. What is the potential difference though which this electron was accelerated

Answers

Answer:

3x10⁴v

Explanation:

Using

Wavelength= h/ √(2m.Ke)

880nm = 6.6E-34/√ 2.9.1E-31 x me

Ke= 6.6E-34/880nm x 18.2E -31.

5.6E-27/18.2E-31

= 3 x 10⁴ Volts

How does the direction of current flow in the coil affect the orientation of the magnetic field produced by the electromagnet

Answers

Answer:

The magnetic field produced by an electric current is always oriented perpendicular to the direction of the current flow. And.Direction of magnetic field is governed by the 'right hand thumb rule, The right hand rule states that: to determine the direction of the magnetic force on a positive moving charge, ƒ, point the thumb of the right hand in the direction of v, the fingers in the direction of B, and a perpendicular to the palm points in the direction of Force . Similar to the situation with electric field lines, the greater the number of lines (or the closer they are together) in an area the stronger the magnetic field.

Two sources of light of wavelength 700 nm are 9 m away from a pinhole of diameter 1.2 mm. How far apart must the sources be for their diffraction patterns to be resolved by Rayleigh's criterion

Answers

Answer:

The distance is  [tex]D = 0.000712 \ m[/tex]

Explanation:

From the question we are told that

    The wavelength of  the  light source is  [tex]\lambda = 700 \ nm = 700 *10^{-9} \ m[/tex]

     The distance from a pin hole is  [tex]x = 9\ m[/tex]

       The  diameter of the pin  hole is  [tex]d = 1.2 \ mm = 0.0012 \ m[/tex]

     

Generally the distance which the light source need to be in order for their diffraction patterns to be resolved by Rayleigh's criterion is

mathematically represented as

              [tex]D = \frac{1.22 \lambda }{d }[/tex]

substituting values

             [tex]D = \frac{1.22 * 700 *10^{-9} }{ 0.0012 }[/tex]

             [tex]D = 0.000712 \ m[/tex]

A brass rod is 185 cm long and 1.60 cm in diameter. What force must be applied to each end of the rod to prevent it from contract- ing when it is cooled from 120.0°C to 10.0°C?

Answers

Answer:

42000N

Explanation:

First you calculate how much it would contract, and secondly you then calculate the force to stretch it by that amount.

1) linear thermal expansion coef brass 19e-6 /K

∆L = αL∆T = (19e-6)(1.85)(110) = 0.00387 meter or 3.87 mm

Second part involves linear elasticity.

for brass, young's modulus is 15e6 psi or 100 GPa

cross-sectional area of rod is π(0.008)² = 0.0002 m²

F = EA∆L/L

F = (100e9)(0.0002)(0.00387) / (1.85)

F = 42000 or 42 kN

Determine the final angular velocity of a particle that rotates 4500 ° in 3 seconds and an angular acceleration of 8 Rad / s ^ 2

Answers

Answer:

the final angular velocity of the particle is approximately 38.18  Rad/s

Explanation:

To start with, let's make sure that units of angle measure are the same, converting everything into radians:

[tex]4500^o\, \frac{\pi}{180^o}= 25\,\pi[/tex]

And now we can use the kinematic formulas for rotational motion:

[tex]\theta-\theta_0=\omega_0\,t+\frac{1}{2} \alpha\,t^2[/tex]

Therefore we can find the initial angular velocity [tex]\omega_0[/tex]  of the particle:

[tex]\theta-\theta_0=\omega_0\,t+\frac{1}{2} \alpha\,t^2\\25\,\pi=\omega_0\,(3)+\frac{1}{2} (8)\,(3)^2\\25\,\pi-36=\omega_0\,(3)\\\omega_0=\frac{25\,\pi-36}{3} \\\omega_0\approx 14.18\,\,\,rad/s[/tex]

and now we can estimate the final angular velocity using the kinematic equation for angular velocity;

[tex]\omega=\omega_0\,+\alpha\,t\\\omega=14.18+8\,(3)\\\omega=38.18\,\,\,rad/s[/tex]

Coherent light with wavelength 601 nm passes through two very narrow slits, and the interference pattern is observed on a screen a distance of 3.00 m from the slits. The first-order bright fringe is a distance of 4.84 mm from the center of the central bright fringe. For what wavelength of light will thefirst-order dark fringe be observed at this same point on the screen?

Answers

Answer:

The wavelength is  [tex]\lambda = 1805 nm[/tex]

Explanation:

From the question we are told that

    The wavelength of the light is  [tex]\lambda = 601 \ nm = 601 *10^{-9} \ m[/tex]

     The  distance of the screen is  D  =  3.0  m

     The  fringe width is  [tex]y = 4.84 \ mm = 4.84 *10^{-3} \ m[/tex]

     

Generally the fringe width for a bright fringe  is mathematically represented as

          [tex]y = \frac{ \lambda * D }{d }[/tex]  

=>     [tex]d = \frac{ \lambda * D }{ y }[/tex]

=>     [tex]d = \frac{ 601 *10^{-9} * 3}{ 4.84 *10^{-3 }}[/tex]

=>     [tex]d = 0.000373 \ m[/tex]

Generally the fringe width for a dark fringe  is mathematically represented as

      [tex]y_d = [m + \frac{1}{2} ] * \frac{\lambda D }{d }[/tex]

Here  m = 0  for  first order dark fringe

   So  

         [tex]y_d = [0 + \frac{1}{2} ] * \frac{\lambda D }{d }[/tex]

looking at which we see that   [tex]y_d = y[/tex]

         [tex]4.84 *10^{-3} = [0 + \frac{1}{2} ] * \frac{\lambda * 3 }{ 0.000373 }[/tex]

=>    [tex]\lambda = 1805 *10^{-9} \ m[/tex]

=>    [tex]\lambda = 1805 nm[/tex]

A sinusoidal sound wave moves through a medium and is described by the displacement wave function s(x, t) = 1.99 cos(15.2x − 869t) where s is in micrometers, x is in meters, and t is in seconds. (a) Find the amplitude of this wave. µm (b) Find the wavelength of this wave. cm (c) Find the speed of this wave. m/s (d) Determine the instantaneous displacement from equilibrium of the elements of the medium at the position x = 0.050 9 m at t = 2.94 ms. µm (e) Determine the maximum speed of a element's oscillatory motion. mm/s

Answers

Answer:

a)  A = 1.99 μm , b) λ = 0.4134 m , c)  v = 57.2 m / s , d)   s = - 1,946 nm ,

e)      v_max = 1,739 mm / s

Explanation:

A sound wave has the general expression

           s = s₀ sin (kx - wt)

where s is the displacement, s₀ the amplitude of the wave, k the wave vector and w the angular velocity, in this exercise the expression given is

           s = 1.99 sin (15.2 x - 869 t)

a) the amplitude of the wave is

        A = s₀

        A = 1.99 μm

b) wave spectrum is

      k = 2π /λ

in the equation k = 15.2 m⁻¹

      λ = 2π / k

      λ = 2π / 15.2

     λ = 0.4134 m

c) the speed of the wave is given by the relation

       v = λ f

angular velocity and frequency are related

       w = 2π f

        f = w / 2π

        f = 869 / 2π

        f = 138.3 Hz

   

        v = 0.4134 138.3

         v = 57.2 m / s

d) To find the instantaneous velocity, we substitute the given distance and time into the equation

       s = 1.99 sin (15.2 0.0509 - 869 2.94 10⁻³)

       s = 1.99 sin (0.77368 - 2.55486)

remember that trigonometry functions must be in radians

       s = 1.99 (-0.98895)

       s = - 1,946 nm

The negative sign indicates that it shifts to the left

e) the speed of the oscillating part is

           v = ds / dt)

           v = - s₀(-w) cos (kx -wt)

the maximum speed occurs when the cosines is 1

           v_maximo = s₀w

           v_maximum = 1.99 869

           v_maximo = 1739.31 μm / s

let's reduce to mm / s

          v_maxio = 1739.31 miuy / s (1 mm / 103 mu)

          v_max = 1,739 mm / s

a) A is = 1.99 μm , b) λ is = 0.4134 m , c) v is = 57.2 m / s , d) s is = - 1,946 nm, e) v_max is = 1,739 mm / s

Calculation of Wavelength

When A sound wave has the general expression is:

Then, s = s₀ sin (kx - wt)

Now, where s is the displacement, Then, s₀ is the amplitude of the wave, k the wave vector, and w the angular velocity, Now, in this exercise the expression given is

s is = 1.99 sin (15.2 x - 869 t)

a) When the amplitude of the wave is

A is = s₀

Thus, A = 1.99 μm

b) When the wave spectrum is

k is = 2π /λ

Now, in the equation k = 15.2 m⁻¹

Then, λ = 2π / k

After that, λ = 2π / 15.2

Thus, λ = 0.4134 m

c) When the speed of the wave is given by the relation is:

Then, v = λ f

Now, the angular velocity and frequency are related is:

w is = 2π f

Then, f = w / 2π

After that, f = 869 / 2π

Now, f = 138.3 Hz

Then, v = 0.4134 138.3

Thus, v = 57.2 m / s

d) Now, To find the instantaneous velocity, When we substitute the given distance and time into the equation

Then, s = 1.99 sin (15.2 0.0509 - 869 2.94 10⁻³)

After that, s = 1.99 sin (0.77368 - 2.55486)

Then remember that trigonometry functions must be in radians

After that, s = 1.99 (-0.98895)

Thus, s = - 1,946 nm

When The negative sign indicates that it shifts to the left

e) When the speed of the oscillating part is

Then, v = ds / dt)

Now, v = - s₀(-w) cos (kx -wt)

When the maximum speed occurs when the cosines is 1

Then, v_maximo = s₀w

After that, v_maximum = 1.99 869

v_maximo = 1739.31 μm / s

Now, let's reduce to mm / s

Then, v_maxio = 1739.31 miuy / s (1 mm / 103 mu)

Therefore, v_max = 1,739 mm / s

Finf more informmation about Wavelength here:

https://brainly.com/question/6352445

A fish is 11.9 cm from the front surface of a fish bowl of radius 33 cm. Where does the fish appear to be to someone in air viewing it from in front of the bowl

Answers

Answer:

The fish would appear 42.7 cm on the left side from the front of the bowl.

Explanation:

The fish (object) distance = 11.9 cm, radius of curvature of the bowl = 33 cm. The distance of image of the fish (image distance) can be determined by applying the mirror formula;

[tex]\frac{1}{f}[/tex] = [tex]\frac{1}{u}[/tex] + [tex]\frac{1}{v}[/tex]

where f is the focal length of the reflecting surface, u is the object distance and v is the image distance.

But, f = [tex]\frac{radius of curvature}{2}[/tex]

         = [tex]\frac{33}{2}[/tex]

       f = 16.5 cm

Substitute f = 16.5 = [tex]\frac{165}{10}[/tex], and u = 11.9 = [tex]\frac{119}{10}[/tex] in equation 1;

[tex]\frac{10}{165}[/tex] = [tex]\frac{10}{119}[/tex] + [tex]\frac{1}{v}[/tex]

[tex]\frac{1}{v}[/tex] = [tex]\frac{10}{165}[/tex] - [tex]\frac{10}{119}[/tex]

  = [tex]\frac{1190 - 1650}{19635}[/tex]

[tex]\frac{1}{v}[/tex] = [tex]\frac{-460}{19635}[/tex]

⇒ v  = [tex]\frac{19635}{-460}[/tex]

       = -42.6848

    v = 42.7 cm

The fish would appear 42.7 cm on the left side from the front of the bowl.

Three crates with various contents are pulled by a force Fpull=3615 N across a horizontal, frictionless roller‑conveyor system. The group of boxes accelerates at 1.516 m/s2 to the right. Between each adjacent pair of boxes is a force meter that measures the magnitude of the tension in the connecting rope. Between the box of mass m1 and the box of mass m2, the force meter reads F12=1387 N. Between the box of mass m2 and the box of mass m3, the force meter reads F23=2304 N. Assume that the ropes and force meters are massless.

Answers

The question is incomplete. Here is the complete question.

Three crtaes with various contents are pulled by a force Fpull=3615N across a horizontal, frictionless roller-conveyor system.The group pf boxes accelerates at 1.516m/s2 to the right. Between each adjacent pair of boxes is a force meter that measures the magnitude of the tension in the connecting rope. Between the box of mass m1 and the box of mass m2, the force meter reads F12=1387N. Between the box of mass m2 and box of mass m3, the force meter reads F23=2304N. Assume that the ropes and force meters are massless.

(a) What is the total mass of the three boxes?

(b) What is the mass of each box?

Answer: (a) Total mass = 2384.5kg;

               (b) m1 = 915kg;

                   m2 = 605kg;

                   m3 = 864.5kg;

Explanation: The image of the boxes is described in the picture below.

(a) The system is moving at a constant acceleration and with a force Fpull. Using Newton's 2nd Law:

[tex]F_{pull}=m_{T}.a[/tex]

[tex]m_{T}=\frac{F_{pull}}{a}[/tex]

[tex]m_{T}=\frac{3615}{1.516}[/tex]

[tex]m_{T}=2384.5[/tex]

Total mass of the system of boxes is 2384.5kg.

(b) For each mass, analyse each box and make them each a free-body diagram.

For [tex]m_{1}[/tex]:

The only force acting On the [tex]m_{1}[/tex] box is force of tension between 1 and 2 and as all the system is moving at a same acceleration.

[tex]m_{1} = \frac{F_{12}}{a}[/tex]

[tex]m_{1} = \frac{1387}{1.516}[/tex]

[tex]m_{1}[/tex] = 915kg

For [tex]m_{2}[/tex]:

There are two forces acting on [tex]m_{2}[/tex]: tension caused by box 1 and tension caused by box 3. Positive referential is to the right (because it's the movement's direction), so force caused by 1 is opposing force caused by 3:

[tex]m_{2} = \frac{F_{23}-F_{12}}{a}[/tex]

[tex]m_{2} = \frac{2304-1387}{1.516}[/tex]

[tex]m_{2}[/tex] = 605kg

For [tex]m_{3}[/tex]:

[tex]m_{3} = m_{T} - (m_{1}+m_{2})[/tex]

[tex]m_{3} = 2384.5-1520.0[/tex]

[tex]m_{3}[/tex] = 864.5kg

PLEASE HELP FAST Five-gram samples of brick and glass are at room temperature. Both samples receive equal amounts of energy due to heat flow. The specific heat capacity of brick is 0.22 cal/g°C and the specific heat capacity of glass is 0.22 cal/g°C. Which of the following statements is true? 1.The temperature of each sample will increase by the same amount. 2.The temperature of each sample will decrease by the same amount. 3.The brick will get hotter than the glass. 4.The glass will get hotter than the brick.

Answers

Answer:

1.The temperature of each sample will increase by the same amount

Explanation:

This is because, since their specific heat capacities are the same and we have the same mass of each substance, and the same amount of energy due to heat flow is supplied to both the glass and brick at room temperature, their temperatures would thereby increase by the same amount.

This is shown by the calculation below

Q = mcΔT

ΔT = Q/mc where ΔT = temperature change, Q = amount of heat, m = mass of substance and c = specific heat capacity of substance.

Since Q, m and c are the same for both substances, thus ΔT will be the same.

So, the temperature of each sample will increase by the same amount

In a LRC circuit, a second capacitor is connected in parallel with the capacitor previously in the circuit. What is the effect of this change on the impedance of the circuit

Answers

Answer:

Impedance increases for frequencies below resonance and decreases for the frequencies above resonance

Explanation:

See attached file

Explanation:

A 23 cm tall object is placed in front of a concave mirror with a radius of 37 cm. The distance of the object to the mirror is 86 cm. Calculate the focal length of the mirror.

Answers

Answer:

18.5 cm

Explanation:

From;

1/u + 1/v = 1/f

Where;

u= object distance = 86cm

image height = 23 cm

Radius of curvature = 37 cm

The radius of curvature (r) is the radius of the sphere of which the mirror forms a part.

Focal length (f) = radius of curvature (r)/2 = 37cm/2 = 18.5 cm

Therefore, the focal length of the mirror is 18.5 cm

During the first part of this lab, we want to determine how the object distance is related to what two quantities

Answers

Answer and Explanation:

The computation of the object distance related to two quantities is shown below:

It could find out by using the lens formula which is shown below:

[tex]\frac{1}{v} - \frac{1}{u} = \frac{1}{f}[/tex]

where,

v = image distance

u = object distance

f = focal length

It could be found by applying the above formula i.e considering the image distance, object distance and the focal length

What is the impedance of an AC series circuit that is constructed of a 10.0-W resistor along with 12.0 W inductive reactance and 7.0 W capacitive reactance

Answers

Answer:

11.2 Ω

Explanation:

The impedance of a circuit is given by;

Z= √R^2 +(XL-XC)^2

Since

Resistance R= 10 Ω

Inductive reactance XL= 12 Ω

Capacitive reactance XC= 7 Ω

Z= √10^2 + (12-7)^2

Z= √100 + 25

Z= √125

Z= 11.2 Ω

Convert 7,348 grams to kilograms

Answers

0.00735 kilograms is your answer. I’m sorry If I didn’t explain it right :(,

The isotope (_90^234)Th has a half-life of 24days and decays to (_91^234)Pa. How long does it take for 90% of a sample of (_90^234)Th to decay to (_91^234)Pa?

Answers

Answer:

79.7 days

Explanation:

Half-life equation:

A = A₀ (½)^(t / T)

where A is the final amount,

A₀ is the initial amount,

t is the amount of time,

and T is the half life.

If 90% decays, then 10% is left.

A = A₀ (½)^(t / T)

0.1 A₀ = A₀ (½)^(t / 24)

0.1 = ½^(t / 24)

ln(0.1) = (t / 24) ln(0.5)

t ≈ 79.7 days

One solenoid is centered inside another. The outer one has a length of 54.0 cm and contains 6750 coils, while the coaxial inner solenoid is 4.00 cm long and 0.170 cm in diameter and contains 21.0 coils. The current in the outer solenoid is changing at 35.0 A/s .What is the mutual inductance of the solenoids?Find the emf induced in the inner solenoid.

Answers

Answer:

 M₁₂ = 1.01 10⁻⁴ H ,   Fem = 3.54 10⁻³ V

Explanation:

The mutual inductance between two systems is

        M₁₂ = N₂ Ф₁₂ / I₁

where N₂ is the number of turns of the inner solenoid N₂ = 21.0, i₁ the current that flows through the outer solenoid I₁ = 35.0 A / s and fi is the flux of the field of coil1 that passes through coil 2

         

the magnetic field of the coil1 is

   B = μ₀ n I₁ = μ₀ N₁/l   I₁

the flow is

             Φ = B A₂

the area of ​​the second coil is

             A₂ = π d₂ / 4

             Φ = μ₀ N₁ I₁ / L  π d² / 4

we substitute in the first expression

            M₁₂ = N₂ μ₀ N₁ / L    π d² / 4

            M₁₂ = μ₀ N₁ N₂ π d² / 4L

           d = 0.170 cm = 0.00170 m

            L = 4.00 cm = 0.00400 m

let's calculate

            M₁₂ = 4π 10⁻⁷ 6750  21 π 0.0017²/ (4 0.004)

             M₁₂ = π² 0.40966 10⁻⁷ / 0.004

             M₁₂ = 1.01 10⁻⁴ H

The electromotive force is

              Fem = - M dI₁ / dt

              Fem = - 1.01 10⁻⁴ 35.0

              Fem = 3.54 10⁻³ V

A wire is carrying current vertically downward. What is the direction of the force due to Earth's magnetic field on the wire

Answers

Answer:

The direction of the force is towards the East.

Explanation:

Using the right hand rule, the force on the current carrying conductor is east.

In the right hand rule, if the hand is held with the fingers pointed parallel to the palm representing the magnetic field, and the thumb held at right angle to the rest of the fingers representing the direction of the current, then the palm will push in the direction of the force.

In this case, the thumb is pointing downwards, with the fingers pointing north away from the body in the direction of the earth's magnetic field, the palm will push east.

An elderly sailor is shipwrecked on a desert island but manages to save his eyeglasses. The lens for one eye has a power of 1.28 diopters, and the other lens has a power of 8.50 diopters. What is the magnifying power of the telescope he can construct with these lenses

Answers

10.88 is the answer to the question

Proposed Exercises: Strength and Acceleration in Circular Movement In the situation illustrated below, a 7kg sphere is connected to a rope so that it can rotate in a vertical plane around an O axis perpendicular to the plane of the figure. When the sphere is in position A, it has a speed of 3m/s. Determine for this position the modulus of tension on the string and the rate at which the tangential velocity is increased.

Answers

Answer:

81 N

7.1 m/s²

Explanation:

Draw a free body diagram of the sphere.  There are two forces:

Weight force mg pulling straight down,

and tension force T pulling up along the rope.

Sum of forces in the centripetal direction:

∑F = ma

T − mg sin 45° = m v² / r

T = m (g sin 45° + v² / r)

T = (7 kg) (10 m/s² sin 45° + (3 m/s)² / 2 m)

T = 81 N

Sum of forces in the tangential direction:

mg cos 45° = ma

a = g cos 45°

a = (10 m/s²) cos 45°

a = 7.1 m/s²

An airplane propeller is rotating at 2200 rpm . You may want to review (Pages 255 - 259) . For related problem-solving tips and strategies, you may want to view a Video Tutor Solution of Rotation of a compact disc.
A. How many seconds does it take for the propeller to turn through 49.0?
t = 4.41x10^-3 S
B. Compute the propeller's angular velocity in rad/s
w = 194 rad/s

Answers

Answer:

a) 3.7 x 10^-3 s

b) 230.41 rad/s

Explanation:

The angular speed N = 2200 rpm (revolution per minute)

==> 2200/60 revolutions per sec = 36.67 rps

The total angle turned in one second = 36.67 x 360° = 13201.2°

if it takes 1 sec to revolve 13201.2°

then it will take t sec to rotate 49.0°

time t = 49/13201.2 = 3.7 x 10^-3 s

conversion to rad/s = 2πN/60 = (2 x 3.142 x 2200)/60 = 230.41 rad/s

. Two waves that have the same wavelengths and amplitudes are traveling in opposite directions on a string. If each wave has a speed of 10 m/s and there are moments when the string is not moving, what is the wavelength of the waves if the time between each moment that the string is flat is 0.5 s?

Answers

Answer:

10m

Explanation:

Since Given frequency f= 1/t

and velocity ν=10 m/s

We know ν=λf

λ= ν/f

​ = 10/1/0.5

=5m

Since both the waves are similar but moves in opposite direction its total wavelength of the wave will be 10 m

Two wires carry current I1 = 73 A and I2 = 31 A in the opposite directions parallel to the x-axis at y1 = 3 cm and y2 = 13 cm. Where on the y-axis (in cm) is the magnetic field zero?

Answers

Answer:

The position on the y-axis where the magnetic field is zero is at y = 10 cm

Explanation:

The magnetic field B due to a long straight wire carrying a current, i at a distance R from the wire is given by

B = μ₀i/2πR

Now, let y be the point where the magnetic fields of both wires are equal.

So, the magnetic field due to wire 1 carrying current i₁ = 73 A is

B₁ = μ₀i₁/2π(y - 3) and

the magnetic field due to wire 2 carrying current i₂ = 31 A is

B₂ = μ₀i₂/2π(13 - y)

At the point where the magnetic field is zero, B₁ = B₂. So,

μ₀i₁/2π(y - 3) = μ₀i₂/2π(13 - y)

cancelling out μ₀ and 2π, we have

i₁/(x - y) = i₂/(13 - y)

cross-multiplying, we have

(13 - y)i₁ = (y - 3)i₂

Substituting the values of i₁ and i₂, we have

(13 - y)73 = (y - 3)31

949 - 73y = 31y - 93

Collecting like terms, we have

949 + 93 = 73y + 31y

1042 = 104y

dividing through by 104, we have

y = 1042/104

y = 10.02 cm

y ≅ 10 cm

So, the position on the y-axis where the magnetic field is zero is at y = 10 cm

It takes 85N of force to accelerate a ball at a rate of 15 m/s². What is the mass of the ball?

Answers

Explanation:

F = ma

85 N = m (15 m/s²)

m ≈ 5.7 kg

If a ray of light traveling in the liquid has an angle of incidence at the interface of 33.0 ∘, what angle does the refracted ray in the air make with the normal?

Answers

Answer:

29°

Explanation:

because the refracted ray angle is small than angle of incidence

Heat and thermodynamics Numerical ​

Answers

Answer:

K = 227.04 W/m.°C

Explanation:

First we need to find the heat required to melt the ice:

q = m H

where,

q = heat required = ?

m = mass of the ice = 8.5 g = 8.5 x 10⁻³ kg

H = Latent heat of fusion of ice = 3.34 x 10⁵ J/kg

Therefore,

q = (8.5 x 10⁻³ kg)(3.34 x 10⁵ J/kg)

q = 2839 J

Now, we find the heat transfer rate through rod:

Q = q/t

where,

t = time = (10 min)(60 s/1 min) = 600 s

Q = Heat Transfer Rate = ?

Therefore,

Q = 2839 J/600 s

Q = 4.73 W

From Fourier's Law of Heat Conduction:

Q = KA ΔT/L

where,

K = Thermal Conductivity = ?

A = cross sectional area = 1.25 cm² = 1.25 x 10⁻⁴ m²

L = Length of rod = 60 cm = 0.6 m

ΔT = Difference in temperature = 100°C - 0°C = 100°C

Therefore,

4.73 W = K(1.25 X 10⁻⁴ m²)(100°C)/0.6 m

K = (4.73 W)/(0.0208 m.°C)

K = 227.04 W/m.°C

g A solenoid 63.5 cm long has 960 turns and a radius of 2.77 cm. If it carries a current of 2.28 A, find the magnetic field along the axis at its center.Find the magnetic field on the solenoidal axis at the end of the solenoid.

Answers

Answer:

The  value is  [tex]B = 0.0043 \ T[/tex]

Explanation:

From the question we are told that

   The  length of the solenoid is  [tex]l = 63.5 = 0.635 \ m[/tex]

    The number of turns is  [tex]N = 960 \ turns[/tex]

    The  current is  [tex]I = 2.28 \ A[/tex]

Generally the magnetic field is mathematically represented as

      [tex]B = \mu _o * n * I[/tex]

Where  n is the number of turn per unit length which is mathematically evaluated as

      [tex]n = \frac{N}{l}[/tex]

     [tex]n = \frac{960}{0.635}[/tex]

     [tex]n = 1512 \ turns /m[/tex]

and  [tex]\mu_o[/tex] is the permeability of free space with value  [tex]\mu_o = 4\pi * 10^{-7} N/A^2[/tex]

So  

    [tex]B = 4\pi * 10^{-7} * 1512 * 2.28[/tex]

    [tex]B = 0.0043 \ T[/tex]

     

"Light traveling in a medium with a refractive index 1.11 is incident on a plate of another medium with index of refraction 1.66. At what angle of incidence is the reflected light fully polarized?"

Answers

Answer:

56°

Explanation:

Brewsters angle can be simply derived from

n1sin theta1= n2sintheta2= n2costheta1

because the reflected light will be 100% polarized if it is reflected at an angle 90o to the refracted light. Hence, Brewsters angle is

Tan theta= n2/n1

1.66/1.11= 1.495

Theta = 56°

Explanation:

Other Questions
In a recent survey of drinking laws, a random sample of 1000 women showed that 65% were in favor of increasing the legal drinking age. In a random sample of 1000 men, 60% favored increasing the legal drinking age. Test the claim that the percentage of men and women favoring a higher legal drinking age is different at (alpha 0.05). The braking distance, D, of a car is directly proportional to the square of its speed, v. When d=5, v=10Find d when v=70 What's the difference between Murder and killer? Water floats on a liquid called "carbon tetrachloride." The two liquids do not mix. A light ray passing from water into carbon tetrachloride has an incident angle of 45.0 and an angle of refraction of 40.1. If the index of refraction of water is 1.33, what is the index of refraction of carbon tetrachloride? How many months does it take for $700 to double at simple interest of 14%? It will takenumber.months to double $700, at simple interest of 14%. Solve for x in x-3x+2=0 What is the volume of the following rectangular prism? Which best describes how the excerpt appeals to readers' emotions? The excerpt provides facts about the tree, which impresses readers' scientific minds. The excerpt describes how the tree traveled to London, which excites the readers' sense of adventure. The excerpt compares the tree to a person, which makes readers feel sympathetic toward the tree. The excerpt explains how to skin a tree, which makes readers feel awed at the height of the tree find the area of the figure pictured below. 3.8ft 8.3ft 7.4ft 3.9ft The function fix) = (x - 4)(x - 2) is shown.What is the range of the function?8all real numbers less than or equal to 3all real numbers less than or equal to -1all real numbers greater than or equal to 3all real numbers greater than or equal to - 16216214COL408G D todos los dias despues de estudiar juego con mis hermanos Kazakhstans capital was Almaty, then it was moved as a forward capital to Astana. What is the new name of Kazakhstans capital city? Draw a line for the axis of symmetry of function f. Also mark the x-intercept(s), y-Intercept, and vertex of the function.f(x)= x^2- 4x-5+10-Line8642--10-8 Andrea Apple opened Apple Photography, Inc. on January 1 of the current year. During January, the following transactions occurred and were recorded in the company's books: 1. Andrea, the stockholder, invested $13,800 cash in the business. 2. Andrea contributed $23,000 of photography equipment to the business. 3. The company paid $2,400 cash for an insurance policy covering the next 24 months. 4. The company received $6,000 cash for services provided during January. 5. The company purchased $6,500 of office equipment on credit. 6. The company provided $3,050 of services to customers on account. 7. The company paid cash of $1,800 for monthly rent. 8. The company paid $3,400 on the office equipment purchased in transaction #5 above. 9. Paid $305 cash for January utilities.Based on this information, the balance in the A. Apple, Capital account reported on the Statement of Owner's Equity at the end of the month would be:a. $31,400.b. $39,200.c. $31,150.d. $40,175.e. $30,875. can someone fix the grammar and the punctuation of the sentence plz I fixed some of it but my teacher is heavily grading the spelling and punctuation and grammar I like that the film version tells the story better for Jim Valentine because In the film we can get a better idea of what the characters look like. The film version gives us something that we cant experience in a book like the emotions and the facial expression for example when the character is in a sad scene you cant see how they react in a book but in the film, you can see how they react if there sad or happy And the picture of the setting we can really hear how the music goes with the play the lighting will get darker and in emotional scene and get brighter and a happy scene the scenes are better portrayed in the film. in the text you can't hear their tone or you cant see the setting or the characteristics of the character and you cant see the lighting can be dark or bright according to the setting, In conclusion, the film version is better at telling the story of Jim Valentine because it gives us a better picture of the story. The art of literature stands apart from among its sisters, because the material in which the literary artist works is the dialect of life; hence, on the one hand, a strange freshness and immediacy of address to the public mind, which is ready prepared to understand it; but hence, on the other, a singular limitation. The sister arts enjoy the use of a plastic and ductile material, like the modeller's clay; literature alone is condemned to work in mosaic with finite and quite rigid words. You have seen these blocks, dear to the nursery: this one a pillar, that a pediment, a third a window or a vase. It is with blocks of just such arbitrary size and figure that the literary architect is condemned to design the palace of his art. Nor is this all; for since these blocks, or words, are the acknowledged currency of our daily affairs, there are here possible none of those suppressions by which other arts obtain relief, continuity, and vigour: no hieroglyphic touch, no smoothed impasto, no inscrutable shadow, as in painting; no blank wall, as in architecture; but every word, phrase, sentence, and paragraph must move in a logical progression, and convey a definite conventional import.Now the first merit which attracts in the pages of a good writer, or the talk of a brilliant conversationalist, is the apt choice and contrast of the words employed. It is, indeed, a strange art to take these blocks, rudely conceived for the purpose of the market or the bar, and by tact of application touch them to the finest meanings and distinctions, restore to them their primal energy, wittily shift them to another issue, or make of them a drum to rouse the passions. But though this form of merit is without doubt the most sensible and seizing, it is far from being equally present in all writers. The effect of words in Shakespeare, their singular justice, significance, and poetic charm, is different, indeed, from the effect of words in Addison or Fielding.In a paragraph of five to eight sentences, identify the author's use of explicit, directly-stated comparisons in the examples in bold. Analyze the examples and explain their meanings. Use proper spelling and grammar. Terms to describe the opposition by a material.to being magnetised is ABC Industries is a division of a major corporation. Data concerning the most recent year appears below: Sales $ 17,910,000 Net operating income $ 1,199,970 Average operating assets $ 4,250,000 The division's return on investment (ROI) is closest to: what is the coefficient of x in the equation of 32+2x=10 solve after finding the coefficient 20 POINTS! You are planning to use a ceramic tile design in your new bathroom. The tiles are equilateral triangles. You decide to arrange the tiles in a hexagonal shape as shown. If the side of each tile measures 9 centimeters, what will be the exact area of each hexagonal shape?