Answer:
[tex]12.79 m/s^2[/tex]
Explanation:
1. Apply Newton's 2nd law:
[tex]F=ma[/tex]
2. Use the definition of weight to find the mass of the box:
[tex]W=mg=m=\frac{W}{g}[/tex]
3. Solve for acceleration in Newton's 2nd law and substitute for mass:
[tex]a=\frac{F}{\frac{W}{g} }[/tex]
4. Plug in the given values from the question and assume [tex]g=9.81m/s^2[/tex]:
[tex]a=\frac{777N}{\frac{596N}{9.81m/s^2} } } =12.79m/s^2[/tex]
Example 4.16
An object of mass 3 kg rests on a plane. The coefficient of static friction and that of kinein
friction are given by Hs = 0.3 and pk = 0.2.
The plane is inclined at angle o to the horizontal.
(i) Find the maximum value of 0 for which the object remains at rest on the plane.
(ii) Find the acceleration of the object if it started sliding from rest down the plane at
angle Omax to the horizontal.
(ii) How long does it take the object to move, from rest, a distance of Imetre under the
conditions of (ii).
Answer:
Explanation:
(i) μs = F/N = mgsinθ/mgcosθ = tanθ
tanθ = 0.3
θ = 16.7°
(ii) a = F/m
a = (mgsinθ - (μk)mgcosθ) / m
a = g(sinθ - (μk)cosθ)
a = 9.8(sin16.7 - (0.2)cos16.7)
a = 0.94 m/s²
(iii) s = ½at²
t = √(2s/a)
t = √(2(1)/0.94)
t = 1.5 s
What will be the speed of these waves (in terms of V) if we increase M by a factor of 18.0, which stretches the wire to double its original length
The speed of the chord wave allows finding a new speed when the mass is increased and the chord length is:
The velocity is: v = [tex]\frac{v_o}{3}[/tex]
A wave is a periodic movement of the particles that carries energy, but not matter, the speed of the waves is related to the properties of the medium by the relationship.
[tex]v = \sqrt{\frac{T}{\mu } }[/tex]
Where v is the speed of the wave, T the force and μ is the linear density.
Indicates that the applied mass increases by a factor of 18.0 and the length of the head is increased to twice the original.
The linear density of the cable is
[tex]\mu = \frac{m}{l}[/tex]
Where m is the mass of the cable and l is the length.
Let's use the subscript "o" for the initial conditions.
M = 18.0 m₀
l = 2 l₀
We look for the density.
[tex]\mu = \frac{18.0 m_o}{2.0 l_o}[/tex]mu = 18.0 mo / 2 lo
[tex]\mu = 9.0 \mu_o[/tex]
We substitute in the expression for the velocity assuming that the tension is kept constant.
[tex]v= \sqrt{\frac{T}{9.0 \mu} }[/tex]
[tex]v= \frac{v_o}{3}[/tex]
In conclusion, using the speed of the chord wave we can find a new speed when the mass is increased and the chord length is:
The velocity is: v = [tex]\frac{v_o}{3}[/tex]
Learn more about wave speed here: brainly.com/question/16824509
Which is the best way to avoid plagiarism? O use more than one source from your research O repeat information from your sources O present a topic in your own words O understand your topic before you begin writing
Answer:
O present a topic in your own words
Explanation:
Plagiarism is using someone else's words or work without giving them proper credit. Presenting a topic in your own words means you are not copying anyone.
Answer:
present a topic in your own words
Explanation:
Name two environmental factors, one natural and one human-made, that could account for the trend or pattern in bird (quail, wren) and rodent (mice, rabbits) populations before 1997. Help!
Factors such as more crops, fewer predators, invasive species, and changes in the environment explain a decrease or increase in the birds and rodent populations.
Before 1997, both rodents and birds populations increased due to different factors. Moreover, these factors can be classified as natural or human-made factors. Here are the factors that mainly affected these animals:
Bird population:
Increase:
Decrease in predators that increase birds chances to survive (natural factor)
Increase in crops that improve food access for birds (human factor)
Decrease:
Invasive species or increase of predators (natural factor)
Destruction of natural habitats due to an increase in industry and extraction (human factor)
Rodent population:
Increase:
More adaptability that increased rodents chances to survive (natural factor)Increase in crops that improve food access for rodents (human factor)Decrease:
Invasive species or increase of predators (natural factor)Increase in rabbit consumption and use of rodent control products (human factor)Learn more in: https://brainly.com/question/18123593
Two students were climbing stairs at school. Student 1 has a weight of 700 N. Student 2 has a weight of 650 N. How much power would each student have if each took 6 s to climb a 4 m tall flight of stairs?
Student 1 would have 4200 W, and Student 2 would have 3900 W of power.
Student 1 would have 116 W, and Student 2 would have 108 W of power.
Student 1 would have 2800 W, and Student 2 would have 2600 W of power.
Student 1 would have 467 W, and Student 2 would have 433 W of power.
Student 1 would have a power 467 W and student 2 would have a power of 433 W. The correct option is the fourth option - Student 1 would have 467 W, and Student 2 would have 433 W of power.
From the question,
We are to calculate the power each student would have to climb the flight of stairs.
Power can be calculated using the formula
[tex]P = \frac{F \times d}{t}[/tex]
Where
P is Power
F is the force
d is the distance
and t is the time
NOTE: The weight of the students represent the force
For student 1F = 700 N
d = 4 m
t = 6 s
∴ [tex]P = \frac{700 \times 4}{6}[/tex]
P = 467 W
For student 2
F = 650 N
d = 4 m
t = 6 s
∴ [tex]P = \frac{650 \times 4}{6}[/tex]
P = 433 W
Hence, Student 1 would have a power 467 W and student 2 would have a power of 433 W. The correct option is the fourth option - Student 1 would have 467 W, and Student 2 would have 433 W of power.
Learn more here: https://brainly.com/question/18801566
Calculate the amount of work done (in joules) to raise the 0.2kg mass 0.5 m
Answer:
1
Explanation:
A=mgh=0.2*10*0.5=1 J
During the experiment it is determined that, as the cart rolls between two points on the track, the work done on the cart by the hanging masses and other forces present is 0.91 J. At the initial time of observation the cart moves with speed 0.61 m/s. Determine the speed at the second point of observation. The mass of the cart is 0.80 Kg.
Answer:
Explanation:
If the work done on the cart is NET work
Then the work will result in an increase in kinetic energy
KE₀ + W = KE₁
½mv₀² + W = ½mv₁²
½(0.80)(0.61²) + 0.91 = ½(0.80)v₁²
v₁ = 1.626991...
v₁ = 1.6 m/s
The speed of the cart at the second point of observation is equal to 1.62 m/s.
What is the work done?Work can be demonstrated as the energy utilized when a force is exerted to make an object move through a particular displacement. Work done by this force is calculated from the product of the magnitude of the exerted force (F) and the distance (d) covered by the body
W= F.d
Where 'F' is the exerted force and 'd' is the displacement and W is work done.
Work and energy have a direct relationship with each other. Work done by an object can be expressed as a change in kinetic energy:
[tex]W =\frac{1}{2}mv_2^2- \frac{1}{2}mv_1^2[/tex]
Where m is the mass of the object, v₂ is the final velocity (m/s), and v₁ is the initial velocity (m/s).
Given, the work done by the cart, W = 0.91 J
The mass of the cart, m = 0.80 Kg
The speed of the cart at the first point, v₁ = 0.61 m/s
[tex]0.91 =\frac{1}{2}\times 0.80 \times v_2^2- \frac{1}{2}0.80 \times (0.61)^2[/tex]
0.40 v₂² = 1.06
v₂² = 2.65
v₂ = 1.62 m/s
Learn more about work, here:
brainly.com/question/13662169
#SPJ2
Croquet ball A moving at 8.3 m/s makes a head on collision with ball B of equal mass and initially at rest. Immediately after the collision ball B moves forward at 6.4 m/s .
What fraction of the initial kinetic energy is lost in the collision?
Answer:
0.25
Explanation:
That is the right answer.
The fraction of the initial kinetic energy is lost in the collision is 35.3%.
The given parameters:
Initial velocity of ball A = 8.3 m/sInitial velocity of ball B = 0Final velocity of ball B = 6.4 m/sThe initial kinetic energy of the system collision is calculated as follows;
[tex]K.E_i = \frac{1}{2} mv_1_i^2 + \frac{1}{2} mv_2_i^2\\\\K.E_i = \frac{1}{2} (m)(8.3)^2 + \frac{1}{2} (m) (0)^2\\\\K.E_i = 34.445 m[/tex]
The final velocity of ball A after collision is calculated as follows;
[tex]u_1 + v_1 = u_2 + v_2\\\\8.3 + v_1 = 0 + 6.4\\\\v_1 = 6.4 - 8.3\\\\v_1 = -1.9 \ m/s[/tex]
The final kinetic energy of the system after collision is calculated as follows;
[tex]K.E_f = \frac{1}{2} m(-1.9)^2 + \frac{1}{2} m(6.4)^2\\\\K.E_f = 22.285 \ m \[/tex]
The fraction of the initial kinetic energy is lost in the collision is calculated as follows;
[tex]= \frac{K_i - K_f}{K_i} \\\\= \frac{34.445 - 22.285}{34.445} \\\\= 0.353\\\\= 35.3\%[/tex]
Learn more about kinetic energy of elastic collision here: https://brainly.com/question/7694106
Which of the following best describes an achievement test that is given at the end of a learning segment to evaluate mastery of objectives?
Answer
An Achievement test is an assessment of developed knowledge or skill. ... Achievement tests are developed to measure skills and knowledge learned in a given grade level, usually through planned instruction, such as training or classroom instruction. Achievement tests are often contrasted with aptitude tests.
Explanation:
help i am having a mental breakdown help! need this done...
*graph is below* help
1. What is Peter’s total distance traveled? What is Peter's displacement?
2. Is there a time when Peter is not moving? If so, when?
Comparing energy resources
9
are things that you can achieve quickly.
O A.
Dreams
OB.
Long-term goals
O c.
Short-term goals
OD.
Plans
Answer:
d
Explanation:
A dreams
.......wkkwkwkwkwkwnwnsksk
Answer:
C. short term goal
Explanation:
took a midterm quiz on canvas, Hope this helps <3
Calculate the torque produced by a 50.0 N perpendicular force at the end of a 0.300 m long wrench.
Answer:
Torque = 50N x 0.3m = 15Nm
Explanation:
Torque = Force x length of lever arm. To obtain the torque simply multiply the two given values.
If work stays the same and the distance is increased, then less force is needed to do the work.
True
False
Answer:
False
Explanation:
This is because the work is the same so the force won't change
Please write a paragraph explaining the bible verse below in your own words.
Exodus 16:19-20
Answer:
Moses had told them to not keep the food till morning but some kept some anyways because they probably thought they were going to starve or not have food the next morning but what I think it means is that you have to trust in God that he will provide for you and so when the people kept the food cuz he thought they were probably going to start of the next day it got maggots
9. The acceleration (a)-time (t) graph of a particle moving in a straight line is as shown in figure. At time t = 0, the velocity of particle is 10 m/s. What is the velocity at t = 8 s?
(1) 2 m/s
(2) 4 m/s
(3) 10 m/s
(4) 12 m/s
Answer:Acceleration - time graph for a particle moving in a straight line is as shown in figure. Change in velocity of the particle from t = 0 to t = 6s is:-.
1 answer
·
Top answer:
Change in velocity = (sum of area of graph) = ( 12 × 4 × 4 ) + ( 12 × ( + 2) ( - 1) ) - 4 = 8 - 4 = 4 x
Explanation:
WILL MARK BRAINLIEST
1. What is the difference between distance and displacement?
A. Distance is measured in feet. Displacement is measured in meters
B. Distance is the difference between how quickly you move between two points. Displacement is the average of that motion
C. Distance is a measure of length of travel. Displacement is the measure of the time it takes to move that length
D. Distance is the length of travel. Displacement is the straight line distance between the starting point and the ending point
2. When forces are in opposite directions, they subtract from one another
A. True
B. False
3. When two forces are in opposite directions, and they are the exact same magnitude, the forces will
A. Subtract from each other
B. Cancel Out
C. Go on Infinitely
D. eventually reach equilibrium
4. Acceleration is a change in motion over time
True or False
Answer:
1. C
2. True
3. D
4. True
Explanation:
While distance refers to “how much land an object has traversed throughout its journey,” displacement measures “how far an object is out of place.” In this post, let's look at the difference between distance and displacement. Thus, option C is correct.
What are the distance and displacement?Displacement and distance are two distinct ideas. The total distance travelled is larger than the displacement between those two points if an object changes direction while travelling.
Distance is the length of any path connecting any two places. Displacement is the straight-line distance between any two points when calculated along the shortest route.
Therefore, The direction is ignored when calculating distance. The direction is accounted for in the displacement calculation.
Learn more about displacement here:
https://brainly.com/question/11934397
#SPJ2
Which of the following methods of pest control used in IPM systems is effective because of the increase in biological diversity it provides? timed crop planting O weed suppression composted soil amendments deep tilling soil
Answer:
Decline in soil health is a serious worldwide problem that decreases complexity and stability of agricultural ecosystems, commonly making them more prone to outbreaks of herbivorous insect pests. Potato (Solanum tuberosum L., Solanaceae) and onion (Allium cepa L., Amaryllidaceae) production is currently characterized by high soil disturbance and heavy reliance on synthetic inputs, including insecticides. Evidence suggests that adopting soil conservation techniques often (but not always) increases mortality and decreases reproductive output for the major insect pests of these important vegetable crops. Known mechanisms responsible for such an effect include increases in density and activity of natural enemy populations, enhanced plant defenses, and modified physical characteristics of respective agricultural habitats. However, most research efforts focused on mulches and organic soil amendments, with additional research needed on elucidating effects and their mechanisms for conservation tillage, cover crops, and arbuscular mycorrhizae.
Introduction
Soil erosion is a serious problem worldwide (Amundson et al., 2015). Although it is often overshadowed in public discourse by other concerns, such as climate change and invasive species, soil deterioration receives considerable attention from the scientific community (Montgomery, 2007; Borrelli et al., 2017; Berhe et al., 2018). In addition to the loss of agricultural productivity, soil erosion has been linked to increased emissions of greenhouse gases and reduced water quality (Amundson et al., 2015; Berhe et al., 2018). Global soil erosion is forecasted to increase in the near future because of cropland expansion, especially in the least economically developed areas (Borrelli et al., 2017).
7. A 1.0 kg metal head of a geology hammer strikes a solid rock with a velocity of 5.0 m/s. Assuming all the energy is retained by the hammer head, how much will its temperature increase
The increase in temperature of the metal hammer is 0.028 ⁰C.
The given parameters:
mass of the metal hammer, m = 1.0 kgspeed of the hammer, v = 5.0 m/sspecific heat capacity of iron, 450 J/kg⁰CThe increase in temperature of the metal hammer is calculated as follows;
[tex]Q = K.E\\\\mc \Delta T = \frac{1}{2} mv^2\\\\\Delta T = \frac{v^2}{2 c}[/tex]
where;
c is the specific heat capacity of the metal hammer
Assuming the metal hammer is iron, c = 450 J/kg⁰C
[tex]\Delta T = \frac{5^2}{2 \times 450} \\\\\Delta T = 0.028 \ ^0C[/tex]
Thus, the increase in temperature of the metal hammer is 0.028 ⁰C.
Learn more about heat capacity here: https://brainly.com/question/16559442
Why does the sky appear red and yellow during sunsets.
1. The reds and yellows are caused by the Sun's light having to pass through dust particles near closer to the horizon than when the Sun is higher in the sky.
2. At sunset the prismatic effect of the atmosphere at low angles produces longer red and yellow wavelengths.
3. At sunset blue light is scattered by air molecules at higher altitudes. The longer red and yellow wavelengths must travel further through the atmosphere when the Sun is near the horizon. At some point the reds and yellows finally scatter in the lower atmosphere causing the reds and yellows.
4. The red and yellows are appear at sunset because the light must pass through more atmosphere which slows down the wavelength frequency turning it to slower red and yellow frequencies.
Answer:
The answer should be 3-At sunset blue light is scattered by air molecules at higher altitudes. The longer red and yellow wavelengths must travel further through the atmosphere when the Sun is near the horizon. At some point the reds and yellows finally scatter in the lower atmosphere causing the reds and yellows.
Answer:
3. At sunset blue light is scattered by air molecules at higher altitudes. The longer red and yellow wavelengths must travel further through the atmosphere when the Sun is near the horizon. At some point the reds and yellows finally scatter in the lower atmosphere causing the reds and yellows.
Given the force diagram of the basketball, what can you tell about the basketball motion?
Newton's laws allow to find the result for the movement of the basketballl:
On the vertical axis the ball is on the ground. On the horizontal axis the ball is accelerating in the direction of the pushing force.
Newton's laws establish the relationship between the forces on objects:
The 1st law states that if the net force is zero the object is stationary or with constant speed. The 2nd law gives a relation of the force with the mass and the acceleration of the body. The 3rd. Law states that the force appears in pairs, one on each body with the same magnitude, but in the opposite direction.
Let's apply these principles to the ball's motion diagram.
The two vertical forces are in the opposite direction, one is due to the weight of the body and the other is the attraction of the earth to the support of the ball, they are of equal magnitude, not their action-reaction force and reluctant because it is applied to the same body
In conclusion we can say that the ball is on the ground.
The two horizontal forces are in the opposite direction, the thrust force is greater than the friction therefore using Newton's second law the ball must be accelerating in the direction of the thrust force.
In conclusion we can say that the ball is accelerating in the direction of the pushing force.
In conclusion using Newton's laws we can find the result for the motion of the basketball:
On the vertical axis the ball is on the ground. On the horizontal axis the ball is accelerating in the direction of the pushing force.
Learn more about Newton's laws here: brainly.com/question/3715235
5. The net external force on a rock of mass 4.2 kg is 8.0 N forward. Find the acceleration of the rock.
Answer:
1.904
Explanation:
F= ma
8 = 4.2 a
a = 8/4.2
a = 1.904
does gravity cause a change in an objects movement
Answer:
yes
Explanation:
because gravity moves things
The Greek root astro means "stars." Use the context clues to choose the correct definition of the word astronomer. According to the astronomer, the bigger the telescope, the more detail we can see in the images. O A. a person who studies astronauts O B. a person who studies the stars O C. a person who tells the future O D. a person who studies other people
Answer:
b, it's a pretty easy explanation
A car is traveling at 8 m/s accelerates at 3.1 m/s^2 to reach a final top speed of 56 m/s. How much time will pass before the car reaches its top speed
Please find attached photograph for your answer.
Hope it helps.
Do comment if you have any query.
If you represented Earth's history by a line that is 1 m long, how long a segment (in cm) would represent the 400 million years since life moved onto the land
The length of the segment that will represent the 400 million years is 8.8 cm.
The given parameters:
length of age of the Earth = 1 meter longage of the Earth = 4.54 billion yearstime to be represented in the given segment = 400 million yearsThe length of the segment that will represent the 400 million years is calculated as follows;
4.54 billion years ------------- 1 m
400 million years ------------- ?
[tex]\frac{1 \ m}{4.54 \times 10^9 \ years} \times 400 \times 10^6 \ years = 0.088 \ m[/tex]
The length of the segment in centimeters (cm) is calculated as follows;
[tex]= 0.088 \ m \times 100 \ cm\\\\= 8.8 \ cm[/tex]
Learn more here:https://brainly.com/question/19471802
2.(01.01 LC)
Which of the following is true for gravitational force? (3 points)
Decreases with increase in mass
Increases with increase in mass
Increases with increase in distance
Decreases with decrease in distance
Answer:
Increases with increase in mass
Explanation:
gravity is proportional to mass and inversely proportional to the square of the distance between them
F = GMm/d²
A car of mass 5000 kg was initially moving at 100 km/h and stops at a distance of 55 m. Find the
magnitude of the net force (in N) acting to stop the car.
Answer:
|F| = 35 kN
Explanation:
a = F/m
100 km/hr(1000 m/km / 3600 s/hr) = 27.8 m/s
v² = u² + 2as
a = (v² - u²) / 2s
F/m = (v² - u²) / 2s
F = m(v² - u²) / 2s
F = 5000(0² - 27.8²) / 2(55)
F = - 35,072.9517...
Ryder is testing the change in motion for an object that weighs 25 kg and an object that weighs 30 kg. He will push each object with the same force. Ryder predicts the object that weighs 25 kg will have a greater change in motion. Is this correct?
Yes, the object with the smaller mass will have a greater change in motion.
No, the change in motion for both objects will be the same.
Yes, the mass is greater, and the object will have a greater change of motion.
No, neither of the objects will have a change in motion.
Ryder is testing the change in motion for an object that weighs 25 kg and an object that weighs 30 kg. Then, the greater change in motion is due to the greater mass of the object, and the object will have a greater change of motion. Thus, the correct option is C.
Motion is the phenomenon in which an object changes its position with respect to the time taken. Motion of an object is mathematically described in terms of the displacement covered by the object, the distance, velocity, acceleration, speed and the frame of reference to an observer and measurement of the change in the position of the body of an object relative to that particular frame with the change in time taken.
The motion of an object is proportional to the mass of the object. The mass is greater in this case, and therefore the objects will have a greater change of motion.
Therefore, the correct option is C.
Learn more about Motion here:
https://brainly.com/question/22810476
#SPJ1
A 27 kg chair initially at rest on a horizontal
floor requires a 173 N horizontal force to set
it in motion. Once the chair is in motion, a
148 N horizontal force keeps it moving at a
constant velocity.
The acceleration of gravity is 9.81 m/s.
a) What is the coefficient of static friction
between the chair and the floor?
Answer:
4653
4565445655687568677667876
