Answer:
D. An alkene
Explanation:
because Ethane is C2H4
Answer:
It's a alkANE. C.
Explanation:
The easiest way to memorize this is to look at the endings. Substances that end in -ANE are alkANEs. Substances that end in -ENE are alkENEs. Substances that end in -YNE are alkYNEs.
What does quantization refer to?
Answer:
Quantization is the process of constraining an input from a continuous or otherwise large set of values (such as the real numbers) to a discrete set (such as the integers).
Explanation:
Quantization refers to the situation where an electromagnetic field consists of discrete energy parcels, photons.
What is Quantatization in Chemistry ?In Chemistry , the concept that a system cannot have any possible energy value but instead is limited to certain specific energy values (states). This states depend on the specific system in question.
Under this system, Energy could be gained or lost only in integral multiples of some smallest unit of energy, a quantum (the smallest possible unit of energy).
Hence, Quantization refers to the situation where an electromagnetic field consists of discrete energy parcels, photons.
Learn more about Quantum here ;
https://brainly.com/question/16746749
#SPJ2
What volume (in liters) of a solution contains 0.14 mol of KCl?
1.8 M KCl
Express your answer using two significant figures.
Answer:
[tex]\boxed {\boxed {\sf 0.078 \ L }}[/tex]
Explanation:
We are asked to find the volume of a solution given the moles of solute and molarity.
Molarity is a measure of concentration in moles per liter. It is calculated using the following formula:
[tex]molarity= \frac{moles \ of \ solute}{liters \ of \ solution}[/tex]
We know there are 0.14 moles of potassium chloride (KCl), which is the solute. The molarity of the solution is 1.8 molar or 1.8 moles of potassium chloride per liter.
moles of solute = 0.14 mol KCl molarity= 1.8 mol KCl/ Lliters of solution=xSubstitute these values/variables into the formula.
[tex]1.8 \ mol \ KCl/ L = \frac { 0.14 \ mol \ KCl}{x}[/tex]
We are solving for x, so we must isolate the variable. First, cross multiply. Multiply the first numerator and second denominator, then the first denominator and second numerator.
[tex]\frac {1.8 \ mol \ KCl/L}{1} = \frac{0.14 \ mol \ KCl}{x}[/tex]
[tex]1.8 \ mol \ KCl/ L *x = 1*0.14 \ mol \ KCl[/tex]
[tex]1.8 \ mol \ KCl/ L *x = 0.14 \ mol \ KCl[/tex]
Now x is being multiplied by 1.8 moles of potassium chloride per liter. The inverse operation of multiplication is division, so we divide both sides by 1.8 mol KCl/L.
[tex]\frac {1.8 \ mol \ KCl/ L *x}{1.8 \ mol \ KCl/L} = \frac{0.14 \ mol \ KCl}{1.8 \ mol \ KCl/L}[/tex]
[tex]x= \frac{0.14 \ mol \ KCl}{1.8 \ mol \ KCl/L}[/tex]
The units of moles of potassium chloride cancel.
[tex]x= \frac{0.14 }{1.8 L}[/tex]
[tex]x=0.07777777778 \ L[/tex]
The original measurements of moles and molarity have 2 significant figures, so our answer must have the same. For the number we found, that is the thousandth place. The 7 in the ten-thousandth place tells us to round the 7 up to a 8.
[tex]x \approx 0.078 \ L[/tex]
There are approximately 0.078 liters of solution.
3 molecules NaOH determine the amount of grams
Answer:
In three mocelus 0.0001 gram.
What is the minimum pressure in kPa that must be applied at 25 °C to obtain pure water by reverse osmosis from water that is 0.690 M in sodium chloride and 0.08 M in zinc sulfate? Assume complete dissociation for electrolytes.
Answer:
1. Water purification method by reverse osmosis – membrane filtration
2. Method of purifying pure water by filter
3. Demineralization by ion exchange method
3. Demineralization by ion exchange method
Explanation:
What is Bose Einstein state of matter and their examples
Answer:
A BEC ( Bose - Einstein condensate ) is a state of matter of a dilute gas of bosons cooled to temperatures very close to absolute zero is called BEC.
Examples - Superconductors and superfluids are the two examples of BEC.
Explanation:
the ability for carbon to form long chain or rings is
How is a light bulb related to radiation?
A. Light bulbs do not have anything to do with radiation.
B. A light bulb emits radiation when its filament is burned out and can longer emit light. This makes it important to remove dead lightbulbs as soon as they wear out.
C. As light is emitted from the filament, the energy in the metal is replaced as lightbulbs absorb background radiation. This prevents the filament from burning out quickly but the radiation cannot be used as power so electricity is still required for the lightbulb to work.
D. The light emitted by a light bulb is a form of radiation that occurs when the filament heats up and its thermal emission gains enough energy to move into the visible spectrum.
Answer:
As light is emitted from the filament, the energy in the metal is replaced as lightbulbs absorb background radiation. This prevents the filament from burning out quickly but the radiation cannot be used as power so electricity is still required for the lightbulb to work.
what are the five main points of kinetic theory of gas?
The kinetic-molecular theory of gases assumes that ideal gas molecules
(1) are constantly moving;
(2) have negligible volume;
(3) have negligible intermolecular forces;
(4) undergo perfectly elastic collisions; and
(5) have an average kinetic energy proportional to the ideal gas's absolute temperature.
The five main postulates of the KMT are as follows:
(1) the particles in a gas are in constant, random motion,
(2) the combined volume of the particles is negligible
(3) the particles exert no forces on one another,
(4) any collisions between the particles are completely elastic.
(5) the average kinetic energy of the particles is proportional to the temperature in kelvins.
Name the following cycloalkane:
H3C-
CH2CH3
A. 1-ethyl-4-methylcyclohexane
B. 4-ethyl-1-methylcyclohexane
C. 1-methyl-4-ethylcyclohexane
Answer:
A
Explanation:
1-ethyl-4-methylcyclohexane
i believe it is A
hope that helped :)
Give the amino acid sequence in the following tetrapeptide using both 3-letter and 1-letter abbreviations for the amino acids. (Capitalize amino acid abbreviations appropriately.) ball
Answer:
ggggggggggggg
Explanation:
gggggggggggthyjum
The solubility of lithium fluoride, LiF, is 1.6 g/L, or 6.2 x 10â2 M.
a. Write the balanced solubility equilibrium equation for LiF.
b. Determine the molar concentration of the lithium ion and the fluoride ion.
c. Write the Ksp expression for the reaction.
d. Calculate Ksp for lithium fluoride.
Answer:
a. LiF(s) ⇄ Li⁺(aq) + F⁻(aq)
b. [Li⁺] = [F⁻] = 6.2 x 10⁻² M
c. Ksp = [Li⁺] [F⁻]
d. Ksp = 3.8 × 10⁻³
Explanation:
The solubility (S) of lithium fluoride, LiF, is 1.6 g/L, or 6.2 x 10⁻² M.
a. The balanced solubility equilibrium equation for LiF is:
LiF(s) ⇄ Li⁺(aq) + F⁻(aq)
b. We will make an ICE chart.
LiF(s) ⇄ Li⁺(aq) + F⁻(aq)
I 0 0
C +S +S
E S S
Then, [Li⁺] = [F⁻] = S = 6.2 x 10⁻² M
c. The solubility product constant, Ksp, is the equilibrium constant for a solid substance dissolving in an aqueous solution.
Ksp = [Li⁺] [F⁻]
d.
Ksp = [Li⁺] [F⁻] = (6.2 x 10⁻²)² = 3.8 × 10⁻³
Tapeworm is grouped in the phylum Platyhelminthes
Answer:
Tapeworm, also called cestode, any member of the invertebrate class Cestoda (phylum Platyhelminthes), a group of parasitic flatworms containing about 5,000 species. ... Tapeworms also lack a circulatory system and an organ specialized for gas exchange.
what is calcium anyone tell plz
Answer:
Calcium is a chemical element with the symbol Ca and atomic number 20.
Calcium is a mineral that is necessary for life. In addition to building bones and keeping them healthy, calcium enables our blood to clot, our muscles to contract, and our heart to beat. About 99% of the calcium in our bodies is in our bones and teeth.
Nucleophilic aromatic substitution involves the formation of a resonance-stabilized carbanion intermediate called a Meisenheimer complex as the nucleophile attacks the ring carbon carrying the eventual leaving group.
a. True
b. False
Answer:
True
Explanation:
Aromatic rings undergo nucleophillic substitution reactions in the presence of a electron withdrawing group which stabilizes the Meisenheimer complex.
When the nucleophile attacks the ring carbon atom carrying the eventual leaving group. A resonance-stabilized carbanion intermediate called a Meisenheimer complex is formed.
Subsequent loss of the leaving group from the intermediate complex yields the product of the reaction.
In an ELISA, the compound 4-chloro-1-naphthol is used because:_______
a. it turns color in the presence of an enzyme that is bound to the secondary antibody
b. it helps the primary antibody bind to the protein
c. it helps the secondary antibody to bind to the protein
d. all of the choices
Answer:
a. It turns color in the presence of an enzyme that us bound to the secondary antibody.
Explanation:
The compound chloronapthenel is used in the reaction because it changes the color in the presence of an enzyme. It is strong organic compound which is used in biochemical processes.
HELP!!!!! Substance A and substance B are mixed together. To separate the mixture, water is added, and substance A is filtered out. Then, the remaining liquid is heated to remove the water, leaving a residue of substance B. Which statement about substance A and substance B could be correct?
A. Substance A is rice, and substance B is sugar.
B. Substance A is alcohol, and substance B is salt.
C. Substance A is sand, and substance B is alcohol.
D. Substance A is sugar, and substance B is instant coffee.
The statement that "substance A is rice, and substance B is sugar" is correct.
WHAT IS A MIXTURE?
A mixture in chemistry is a substance that contains two or more different substances. One notable characteristics of a mixture is that it can easily be separated using physical means.According to this question, a mixture contains two substances A and B. Water is added to this mixture for easy separation.
Substance A is filtered out. This means that substance A is a solid that is insoluble in water. This substance is RICE. The remaining liquid is heated to remove the water content leaving a residue of substance B. This shows that substance B is also a solid but soluble in water. SUGAR best fits this description.Therefore, in the mixture of two substances A and B, substance A is rice, and substance B is sugar.
Learn more at: https://brainly.com/question/6594631
FILL IN THE BLANK:
The rate of a reaction is measured by how fast a (Product Or Reactant)
is used up or how fast a
(Reactant Or Product) is formed?
Answer:
the rate of a reaction is measured by how fast a REACTANT is used up or how fast a PRODUCT is formed
Calculate the enthalpy change for the reaction of hydrogen and chlorine using the bond energies below.
"BOND." " BOND ENERGY "
H-H. 436
CL-CL. 242
H-CL. 431
Answer:
final-intial temperature= enthalpy change
The specific heat capacity of lead is 0.13 J/g-K. How much heat (in J) is required to raise the temperature of 15 g of lead from 22 °C to 37 °C? a. 5.8 × 10-4 J b. 0.13 J c. 29 J d. 2.0 J e. -0.13 J
Answer:
c. 29 J
Explanation:
Step 1: Given data
Specific heat capacity of Pb (c): 0.13 J/g.K (= 0.13 J/g.°C)Mass of Pb (m): 15 gInitial temperature: 22 °CFinal temperature: 37 °CStep 2: Calculate the temperature change
ΔT = 37 °C - 22 °C = 15 °C
Step 3: Calculate the heat (Q) required to raise the temperature of the lead piece
We will use the following expression.
Q = c × m × ΔT
Q = 0.13 J/g.°C × 15 g × 15 °C = 29 J
Based on periodic properties, choose the more metallic element from each of the following pairs.
Match the words in the left column to the appropriate blanks in the sentences on the right.
Between Sr and Sb, the more metallic element is ______
Between \rm Sr and \rm Sb, the more metallic element is _______
Between As and Bi, the more metallic element is ______
Between \rm As and \rm Bi, the more metallic element is _______
Between Cl and O, the more metallic element is ______
Between \rm Cl and \rm O, the more metallic element is ______
Between S and As, the more metallic element is ______
Between \rm S and \rm As, the more metallic element is _______
Answer:
Sr is the more metallic element
Bi is the more metallic element
O is the more metallic element
As is the more metallic element
Explanation:
One thing should be clear; metallic character increases down the group but decreases across the period.
Hence, as we move across the period, elements become less metallic. As we move down the group elements become more metallic.
This is the basis upon which decisions were made about the metallic character of each of the elements listed above.
what is the charge on the Mn ions in Mn2o3? 1+, 2+, 3+,3-,4+?
Sodium acetate is produced by the reaction of baking soda and vinegar. The resultant solution is then heated until it becomes saturated and allowed to cool. As a result, the solution has become supercooled. Upon addition of a small seed crystal, the solution temperature increases as sodium acetate trihydrate crystallizes. Its molar enthalpy of fusion is 35.9 kJ/mol. How much thermal energy would be released by 276.0 g of sodium acetate trihydrate (molar mass
Answer: The thermal energy that would be released by 276.0g of sodium acetate trihydrate is 71.8kJ.
Explanation:
Supercooling is the process of lowering the temperature a liquid below its freezing point, without it becoming solid. A liquid below its freezing point will crystallize in the presence of a seed crystal because it serves as a structure for formation of crystals. From the question,
The given mass of sodium acetate trihydrate
(CH3COONa.3H2O)= 276.0g
Molar mass of sodium acetate
trihydrate= 136.08g/mol
Thermal heat of fusion of sodium acetate
trihydrate = 35.9 kJ/mol
From the given mass the number of moles present= 276.0/ 136.08
= 2.0moles
Therefore the heat (thermal) energy of the given mass of sodium acetate
trihydrate = 2.0 × 35.9
= 71.8kJ
Therefore, upon addition of a small seed crystal, the solution temperature increases as sodium acetate trihydrate crystallizes.
Which of the following are examples of single replacement reactions? Select all that apply.
Answer:
Na2S(aq)+Cd(No3)2(aq)=CdS(s)+2NaNo3(aq)
Answer: it’s checkbox 2&3
The color cyan has a frequency of 5.902x10^14 What is the wavelength in nm ? Record your answer with 2
decimals.
The wavelength of the color cyan is 508 nm.
To solve the problem, we use the following equation that relates the frequency (ν) and the wavelength (λ) of a wave:
c = λ x ν
Given:
c = speed of light = 3.00 x 10⁸ m/s (is a constant)
ν = 5.902 x 10¹⁴ Hz = 5.902 s⁻¹
We introduce the data to calculate the wavelength in m:
λ = c/ν = (3.00 x 10⁸ m/s)/(5.902 s⁻¹) = 5.08 x 10⁻⁷ m
We know that 10⁻⁹m = 1 nm, so we convert λ to nm:
λ = 5.08 x 10⁻⁷ m x 1 nm/10⁻⁹m = 508 nm
To learn more about the relationship between frequency and wavelength in a wave, you can visit: https://brainly.com/question/4386945
8) Determine whether mixing each pair of the following results in a buffera. 100.0 mL of 0.10 M NH3 with 100.0 mL of 0.15 MNH4Cl b. 50.0 mL of 0.10 M HCL with 35.0 mL of 0.150 M NaOHc. 50.0 mL of 0.15 M HF with 20.0 mL of 0.15 M NaOHd. 175.0 mL of 0.10 M NH3 with 150.0 mL of 0.12 M NaOH
Answer:
a. 100.0 mL of 0.10 M NH₃ with 100.0 mL of 0.15 M NH₄Cl.
c. 50.0 mL of 0.15 M HF with 20.0 mL of 0.15 M NaOH.
Explanation:
A buffer system is formed in 1 of 2 ways:
A weak acid and its conjugate base.A weak base and its conjugate acid.Determine whether mixing each pair of the following results in a buffer.
a. 100.0 mL of 0.10 M NH₃ with 100.0 mL of 0.15 M NH₄Cl.
YES. NH₃ is a weak base and NH₄⁺ (from NH₄Cl ) is its conjugate base.
b. 50.0 mL of 0.10 M HCl with 35.0 mL of 0.150 M NaOH.
NO. HCl is a strong acid and NaOH is a strong base.
c. 50.0 mL of 0.15 M HF with 20.0 mL of 0.15 M NaOH.
YES. HF is a weak acid and it reacts with NaOH to form NaF, which contains F⁻ (its conjugate base).
d. 175.0 mL of 0.10 M NH₃ with 150.0 mL of 0.12 M NaOH.
NO. Both are bases.
calculate the total consumer surplus in the amusement park market if they a 12
Answer:
The total consumer surplus is 240.
Explanation:
If p=12 then q=20
0.5×(36−12)×20=240
here's the graph to help you see the change.
What can be found on the periodic table?
A. the name of molecules formed by the element
B. the number of isotopes an element has
C. the date an element was discovered
D. the number of protons an element has
Answer:
I think the answer is..
The name of molecules formed by the element.
I hope it will help you !
Hydrogengasand oxygengas react to form water vapor. Suppose you have of and of in a reactor. Calculate the largest amount of that could be produced. Round your answer to the nearest .
The question is incomplete. The complete question is :
Hydrogen [tex](H_2)[/tex] gas and oxygen [tex](O_2)[/tex] gas react to form water vapor [tex](H_2O)[/tex]. Suppose you have 11.0 mol of [tex]H_2[/tex] and 13.0 mol of [tex]O_2[/tex] in a reactor. Calculate the largest amount of [tex]H_2O[/tex] that could be produced. Round your answer to the nearest 0.1 mol .
Solution :
The balanced reaction for reaction is :
[tex]$2H_2(g) \ \ \ \ + \ \ \ \ \ O_2(g)\ \ \ \rightarrow \ \ \ \ 2H_2O(g)$[/tex]
11.0 13.0
11/2 13/1 (dividing by the co-efficient)
6.5 mol 13 mol (minimum is limiting reagent as it is completely consumed during the reaction)
Therefore, [tex]H_2[/tex] is limiting reagent. It's stoichiometry decides the product formation amount from equation above it is clear that number of moles for [tex]H_2O[/tex] will be produced = number of moles of [tex]H_2[/tex]
= 11.0 mol
Which of the following substances can be used to neutralize HF?
A: HF
B: SO2
C: HCI
D: NaOH
Answer:
option (D) NaOH is right answer
A neutralization reaction is "a reaction in which an acid and a base react to form water and a salt and involves H+ ions and OH- ions to produce water.
What is an acid?An acid is "any hydrogen-containing substance that is capable of donating a proton or hydrogen ion to another substance".
What is base?Base is "a substance that gets dissociated in an aqueous solution to form hydroxide ions OH-".
Hence, NaOH can be used to neutralize HF.
To learn more about Neutralization reaction here
https://brainly.com/question/24367029
#SPJ2
For each reaction, write the chemical formulae of the oxidized reactants.
a. ZnCl2 (aq) + 2Na(s) → Zn(s) + 2NaCl(aq)
b. Al(s) + FeBrz (aq) → AlBrz (aq) + Fe(s)
c. FeSO4 (aq) + Zn (s) → Fe(s) + ZnSO4(aq)
Answer:
a. Na(s); b. Al(s); c. Zn(s)
Explanation:
Let's consider the following redox reactions.
a. ZnCl₂ (aq) + 2 Na(s) → Zn(s) + 2 NaCl(aq)
Na is oxidized because its oxidation number increases from 0 to +1 (in NaCl) whereas Zn is reduced because its oxidation number decreases from 2+ (in ZnCl₂) to 0.
b. Al(s) + FeBr₃ (aq) → AlBr₃ (aq) + Fe(s)
Al is oxidized because its oxidation number increases from 0 to +3 (in AlBr₃) whereas Fe is reduced because its oxidation number decreases from 3+ (in FeBr₃) to 0.
c. FeSO₄ (aq) + Zn(s) → Fe(s) + ZnSO₄(aq)
Zn is oxidized because its oxidation number increases from 0 to +2 (in ZnSO₄) whereas Fe is reduced because its oxidation number decreases from 2+ (in FeSO₄) to 0.
