I need help with this​

you have to read the bottom link for the answer key

Answer:

a. best score to guess would be 33

b. Standard deviation simplifies the square root of the mean so makes it closer to 1 has more consistency as the mean of 32 when squared is sqrt 32  is Class A as class a = 4 and is closer to 5.65685425

as 5.65685425^2 = 32

Step-by-step explanation:

If you are comparing two normally-distributed variables on the same measurement scale then yes, you can regard the standard deviation as an indicator of how reliable the mean is--the smaller the standard deviation, the better able you are to "zero in" on the actual population mean.

a. proofs;

We find  32/6 = 5.333 and 32/5 = 6.4 and 6.4 is closer to both sd 4 and 8 than 5.33 is. As 6.4 it is closer to 6

But when we use 33/6 = 5.5 and therefore shows close range 6

therefore the two sd  proves it is slightly high 32 score average for both classes A + B when joined and high 32 = 33 mean when classes A+B are joined or you could say 32/8 = 4 is class B becomes lower tests scores as 32/4 = 8 of class A that has higher test scores.

In this exercise we have to use probability and statistics to organize the students' grades, so we have:

A) best score is  33

B) Class A

In the first part of the exercise we have to analyze the grades of each class, like this:

A)Class A: 32/4

Class B: 32/8

Dividing each of them we have:

[tex]32/4=8 \\32/8=4[/tex]

B) With the information given above, we can say that the best class is A.

See more about statistics at  brainly.com/question/10951564

Answer:

B

Step-by-step explanation:

The equation represented in the question is the parent absolute value question. If you know the different parent functions, then the answer is obvious because absolute value equations always form a V. However, if you do not do this then you can create a table and plugin values. Plugin numbers like 0, -1, and 1 for X and solve for Y. Finally, graph these points and see what graph best fits. If needed you can also plug in more points.

Answer:

B.

Step-by-step explanation:

I got it correct on the warm up

Answer:

an arithmetic sequence

Step-by-step explanation:

an arithmetic series is wrong also heres an example i found of an arithmetic sequence

The terms in the given sequence represents an arithmetic sequence.

Arithmetic sequence is a sequence of numbers where the numbers are arranged ion a definite order such that the difference of two consecutive numbers is a constant. This constant of difference is called common difference which is commonly denoted by the letter 'd'.

Given sequence of numbers is,

-8, -4, 0, 4, 8, 12, ......

We have to find which sequence does it represent.

This is not a series since they are not represented as the sum.

If the sequence is a geometric sequence, then the ratio of consecutive numbers will be same.

If it is arithmetic sequence, then the difference of consecutive numbers will be same.

Here, ratio is not same.

Difference are same.

-4 - -8 = 4, 0 - -4 = 4, 4 - 0 = 4, 8 - 4 = 4, ........

Common difference is 4.

Hence it is an arithmetic sequence.

Learn more about arithmetic Sequence here :

https://brainly.com/question/15412619

#SPJ3

Answer:

Pls be specific with your question

Answer:

a) Because this asks about the radius and height, I assume that we are talking about a cylinder shape.

Remember that for a cylinder of radius R and height H the volume is:

V = pi*R^2*H

And the surface will be:

S = 2*pi*R*H + pi*R^2

where pi = 3.14

Here we know that the volume is 1000cm^3, then:

1000cm^3 = pi*R^2*H

We can rewrite this as:

(1000cm^3)/pi = R^2*H

Now we can isolate H to get:

H = (1000cm^3)/(pi*R^2)

Replacing that in the surface equation, we get:

S = 2*pi*R*H + pi*R^2

S = 2*pi*R*(1000cm^3)/(pi*R^2) + pi*R^2

S = 2*(1000cm^3)/R + pi*R^2

So we want to minimize this.

Then we need to find the zeros of S'

S' = dS/dR = -(2000cm^3)/R^2 + 2*pi*R = 0

So we want to find R such that:

2*pi*R = (2000cm^3)/R^2

2*pi*R^3 = 2000cm^3

R^3 = (2000cm^3/2*3.14)

R = ∛(2000cm^3/2*3.14) = 6.83 cm

The radius that minimizes the surface is R = 6.83 cm

With the equation:

H = (1000cm^3)/(pi*R^2)

We can find the height:

H = (1000cm^3)/(3.14*(6.83 cm)^2) =  6.83 cm

(so the height is equal to the radius)

b) The surface equation is:

S = 2*pi*R*H + pi*R^2

replacing the values of H and R we get:

S = 2*3.14*(6.83 cm)*(6.83 cm) + 3.14*(6.83 cm)^2 = 439.43 cm^2

c) Because if we pack cylinders, there is a lot of space between the cylinders, so when you store it, there will be a lot of space that is not used and that can't be used for other things.

Similarly for transport problems, for that dead space, you would need more trucks to transport your ice cream packages.

9514 1404 393

Answer:

   5/9 m/min

Step-by-step explanation:

The depth of the water is 2/5 of the depth of the trough, so the width of the surface will be 2/5 of the width of the trough:

  2/5 × 2 m = 4/5 m

Then the surface area of the water is ...

  A = LW = (18 m)(4/5 m) = 14.4 m²

The rate of change of height multiplied by the area gives the rate of change of volume:

  8 m³/min = (14.4 m²)(h')

  h' = (8 m³/min)/(14.4 m²) = 5/9 m/min

Answer:

1640

Step-by-step explanation:

Take the total amount and divide by the amount for one

Make sure to write 6 cent in dollar form (.06)

98.41 / .06

1640.1666

Round down since we need to buy whole bottles

1640

Answer:

On average, a player should expect to win $15.

Step-by-step explanation:

The expected value in an event with outcomes:

x₁, x₂, ..., xₙ

Each with probability:

p₁, ..., pₙ

is given by:

Ev = x₁*p₁ + ... +xₙ*pₙ

In this case we have 3 outcomes:

player wins $75 = x₁

player wins $45 = x₂

player does not win = x₃

Let's find the probabilities of these events.

player wins $75)

Here we must have the 3 coins landing on heads, so there is only one possible outcome to win $75

While the total number of outcomes for tossing 3 coins, is the product between the number of outcomes for each individual event (where the individual events are tossing each individual coin, each one with 2 outcomes)

Then the number total of outcomes is:

C = 2*2*2 = 8

Then the probability of winning $75 is the quotient between the number of outcomes to win (only one) and the total number of outcomes (8)

p₁ = 1/8

Win $45:

This happens if the 3 coins land on tails, so is exactly equal to the case above, and the probability is the same:

p₂ = 1/8

Not wining:

Remember that:

p₁ + p₂ + ... + pₙ = 1

Then for this case, we must have:

p₁ + p₂ + p₃ = 1

1/8 + 1/8 + p₃ = 1

p₃ = 1 - 1/8 - 1/8

p₃ = 6/8

Then the expected value will be:

Ev = $75*1/8 + $45*1/8 + $0*6/8 = $15

On average, a player should expect to win $15.

Answer:

14.8%

Step-by-step explanation:

53/100*53/100*53/100

Answer:

1 = - 4 - 14 √3

2 = 9 - 11 √3

Step-by-step explanation:

Question 1

(-4√3 + 2)(√3 + 4)

Apply FOIL method

= (-4√3) √3 + (-4√3) . 4 + 2 √3 + 2 . 4

Apply minus-plus rules: + (-a) = -a

= -4 √3 √3 - 4 . 4 √3 + 2 √3 + 2 . 4

Simplify

= - 4 - 14 √3

Question 2

(-3 + √3)(1 + 4 √3)

Apply FOIL method

= (-3) . 1 + (-3) . 4 √3 + √3 . 1 + √3 . 4 √3

Apply minus-plus rules: + (-a) = -a

= -3 . 1 - 3 . 4 √3 + 1 . √3 + 4 √3 √3

Simplify

= 9 - 11 √3

Answer:

12

Step-by-step explanation:

Find the LCM (Least Common Multiple) of the three numbers.

We could multiply 3 x 4 x 6 to get 72, but there is a smaller multiple, 12.

6 x 2 = 12

4 x 3 = 12

3 x 4 = 12

Hope this helps!

Answer:

12

Step-by-step explanation:

113.04=3.14 x 3^2 x h/3

Answer:

4 cm by 5 cm (4 x 5)

Step-by-step explanation:

The area of a rectangle with length [tex]l[/tex] and width [tex]w[/tex] is given by [tex]A=lw[/tex]. Since the length of the rectangle is 7 less than 3 times its width, we can write the length as [tex]3w-7[/tex]. Therefore, substitute [tex]l=3w-7[/tex] into [tex]A=lw[/tex]:

[tex]A=lw,\\20=(3w-7)w[/tex]

Distribute:

[tex]20=3w^2-7w[/tex]

Subtract 20 from both sides:

[tex]3w^2-7w-20=0[/tex]

Factor:

[tex](w-4)(3w+5)=0,\\\begin{cases}w-4=0, w=\boxed{4},\\3w+5=0, 3w=-5, w=\boxed{-\frac{5}{3}}\end{cases}[/tex]

Since [tex]w=-\frac{5}{3}[/tex] is extraneous (our dimensions cannot be negative), our answer is [tex]w=4[/tex]. Thus, the length must be [tex]20=4l, l=\frac{20}{4}=\boxed{5}[/tex] and the dimension of the rectangle are 4 cm by 5 cm (4 x 5).

Answer:

[tex]m\angle H = 30^o[/tex]

Step-by-step explanation:

Given

See attachment

Required

Find [tex]m\angle H[/tex]

To calculate [tex]m\angle H[/tex], we make use of:

[tex]\cos(\theta) = \frac{Adjacent}{Hypotenuse}[/tex]

So, we have:

[tex]\cos(H) = \frac{GH}{HI}[/tex]

This gives:

[tex]\cos(H) = \frac{10\sqrt3}{20}[/tex]

[tex]\cos(H) = \frac{\sqrt3}{2}[/tex]

Take arccos of both sides

[tex]m\angle H = cos^{-1}(\frac{\sqrt3}{2})[/tex]

[tex]m\angle H = 30^o[/tex]

Answer:

39

Step-by-step explanation:

1. (2(4)-5)(2(4)+5)

2.(3)(13)

3.39

Answer:

Step-by-step explanation:

This is a difference of squares question. You should 64 = 25 = 39 Let's see if that happens.

Difference of squares

(2x - y) ( 2x + y) = 4x^2 - y^2

4(4)^2 - (5)^2

64 - 25 = 39

Now do the question exactly as it is written.

(2*4 - -5)(2*4 + -5)

(8 +5)(8 - 5)

3 * 13

39

They really do give the same answer.

9514 1404 393

Answer:

  (d)  2

Step-by-step explanation:

The parallel lines divide the transversals proportionally, so we have ...

  3y/3 = 2y/y

  y = 2 . . . . . . . . . simplify (assuming y ≠ 0)

Answer:

Answer: See explanation

Step-by-step explanation:

1. Use the five steps of hypothesis testing.

Step 1: The aim of the research is to conduct the five steps of hypothesis testing.

Step 2:

Null hypothesis: H0 u= 4

Population mean: H1 u = 4

Alternate hypothesis: u ≠ 4

Population mean: u ≠ 4

Step 3 and step 4 are attached.

Step 5: Based on the calculation, the calculated value of t is less than the t critical value, therefore, the null hypothesis will be failed to be rejected.

2. Sketch the distributions involved

This has been attached.

3. Explain the logic of what you did to a person who is familiar with hypothesis testing, but knows nothing about t tests of any kind.

The distribution is "t".

The means is tested by using T-test.

Chi-square is used to test the single variance.

Answer:

The p-value of the test statistic is 0.2019.

Step-by-step explanation:

Test if there is evidence at the 0.02 level that the medicine relieves pain in more than 384 seconds.

At the null hypothesis, we test if it relieves pain in at most 384 seconds, that is:

[tex]H_0: \mu \leq 384[/tex]

At the alternative hypothesis, we test if it relieves pain in more than 384 seconds, that is:

[tex]H_1: \mu > 384[/tex]

The test statistic is:

[tex]z = \frac{X - \mu}{\frac{\sigma}{\sqrt{n}}}[/tex]

In which X is the sample mean, [tex]\mu[/tex] is the value tested at the null hypothesis, [tex]\sigma[/tex] is the standard deviation and n is the size of the sample.

384 is tested at the null hypothesis:

This means that [tex]\mu = 384[/tex]

For a sample of 41 patients, the mean time in which the medicine relieved pain was 387 seconds. Assume the population standard deviation is 23.

This means that [tex]n = 41, X = 387, \sigma = 23[/tex]

Value of the test statistic:

[tex]z = \frac{X - \mu}{\frac{\sigma}{\sqrt{n}}}[/tex]

[tex]z = \frac{387 - 384}{\frac{23}{\sqrt{41}}}[/tex]

[tex]z = 0.835[/tex]

P-value of the test:

The p-value of the test is the probability of finding a sample mean above 387, which is 1 subtracted by the p-value of z = 0.835.

Looking at the z-table, z = 0.835 has a p-value of 0.7981.

1 - 0.7981 = 0.2019

The p-value of the test statistic is 0.2019.

Answer:

e. All of the above statements are correct.

Option e is correct. All of the above statements are correct.

Data science is an interdisciplinary academic field that uses statistics, scientific computing, scientific methods, processes, algorithms and systems to extract or extrapolate knowledge and insights from noisy, structured and unstructured data

Data Scientist makes value out of data, he is expert in various tools and technologies like machine learning, deep learning, artificial intelligence and he solve business problems by presenting a model to predict business future.

During data preparation, data scientists and DBAs aggregate the data and merge them from different sources. During data preparation, data scientists and DBAs define the variables to be used in the model.

Hence, All of the above statements are correct, Option e is correct.

To learn more on Data science click:

https://brainly.com/question/20815848

#SPJ5

Michael = 210 / 3.5 = 60 miles per hour

Jordan = 330/ 6 =55 miles per hour

Jordan drove 5 miles per hour slower than michael

Answer:

skewness

Step-by-step explanation:

Average.

The average of a set of observations is the most important and useful measure of statistics and is a position measure, as it shows the positions of the numbers to which it refers. The average value is involved in several types of statistics and is examined in almost all statistical distributions. It is generally defined as the sum of the observations by their number. That is, it is the mathematical operation of finding the "mean distance" between two or more numbers.

Learn more about averages in https://brainly.com/question/22390452

Answer:

x ≈ 5.89

General Formulas and Concepts:

Pre-Algebra

Algebra II

Step-by-step explanation:

Step 1: Define

Identify

0.77 = log(x)

Step 2: Solve for x

Answer:

Range { 2,3,4,5}

Step-by-step explanation:

The range is the output values

Range { 2,3,4,5}

Answer:

Option C (25%) is the correct answer.

Step-by-step explanation:

Given:

Number of students,

= 120

Students responded high interest,

= 30

Students responded medium interest,

= 50

Students responded low interest,

= 40

Now,

The relative frequency will be:

= [tex]\frac{30}{120}[/tex]

= [tex]0.25[/tex]

or,

= [tex]25[/tex]%

Answer:

(in attachment)

Step-by-step explanation:

you can find the points by inputting the x-values into the equation to solve for the y-values, then connecting the plotted points to create the line.

When x=-4

y=1/2(-4)

y=-2

(-4,-2)

Repeat for all values.