What does microbiome do to your cells?

Answer:

Hi there, The correct answer is, OPT A

Explanation:

Please mark as the brainliest

Answer:

hot air rises and expanded the balloon

Explanation:

thats it.

Answer:

From my side the correct option is "A"

Explanation:    Reasons for its correction are ,

1)  Highly reactive: Nanoparticles are therefore extremely unstable and easily change themselves or react with active substances to reach a relatively stable state in some cases. This causes desired changes or undesired changes to nanoparticles and thus makes them exhibit a high reactivity and a poor stability.

2)Small size:  Nanotechnology can provide rapid and sensitive detection of cancer-related molecules, enabling scientists to detect molecular changes even when they occur only in a small percentage of cells. Nanotechnology also has the potential to generate entirely novel and highly effective therapeutic agents.

Answer:

A barium atom would be expected to contain 2 electrons in its outer energy level.

Explanation:

The columns of the periodic table are called groups. There are eighteen groups, numbered from 1 to 18.

The elements of each group have the same number of electrons in their last atomic shell, which is why they have similar chemical properties, because the chemical properties of chemical elements are strongly related to the electrons located in the last atomic shell.

That is, in a group, the chemical properties are very similar, because all the elements of the group have the same number of electrons in their last or last shells.

A barium atom would be expected to contain 2 electrons in its outer energy level.

Answer:

excess reactant

Explanation:

The excess reactant is the reactant in a chemical reaction with a greater amount than necessary to react completely with the limiting reactant. It is the reactant(s) that remain after a chemical reaction has reached equilibrium.

In a reaction containing two reactants, if one of the reactants is in excess, the other reactant is known as the limiting reactant which decides the yield of the reaction.

In a reaction, all the reactants have to be in correct stoichiometry to complete the reaction. To achieve the mole ratio of the reactants is very much important for the completion of a reaction.

If a reactant is insufficient in amount, then the reaction will stop as soon as this reactant is consumed. Hence, this reactant determine the yield of the product. This reactant which is not in correct stoichiometry for the complete reaction is called the limiting reactant.

The reactant which is excess in quantity thus does not have a role in the yield of the reaction is called the excess reactant. Whatever, the concentration of this reactant in extra, the reaction does not proceed after the consumption of limiting reactant.

Find more on limiting reactant :

https://brainly.com/question/14225536

#SPJ2

Answer: C

Explanation:

I know because i did it.

Answer:

5.56×10¯³ m

Explanation:

From the question given above, the following data were obtained:

Frequency (v) = 5.4×10¹⁰ Hz

Wavelength (λ) =?

The velocity of electromagnetic wave, frequency and wavelength are related according to the equation:

Velocity (c) = wavelength (λ) × frequency (v)

c = λv

With the above formula, the wavelength of the radio wave can be obtained as follow:

Frequency (v) = 5.4×10¹⁰ Hz

Wavelength (λ) =?

Velocity (c) = 3×10⁸ m/s

c = λv

3×10⁸ = λ × 5.4×10¹⁰

Divide both side by 5.4×10¹⁰

λ = 3×10⁸ / 5.4×10¹⁰

λ = 5.56×10¯³ m

Thus, wavelength of the radio wave is 5.56×10¯³ m

Answer:

you know what i really dont know but imagine if they were huge

Explanation:

Answer:

Na2So4

Explanation:

Na is group 1, so has a charge of 1+

Sulphate’s formula is SO4 2-,

because sulphate has double the charge of Na, you need two Na’s to make it equal.

Therefore it’s Na2SO4

Answer:

CO2 molar mass=44.01g

3 moles CO2 = 132.03g

Explanation:

CO2 molar mass = 12.01+2(16.00)=44.01g

3 moles CO2 * (44.01 g CO2)/(1 mol CO2)=132.03g

(Answer would be different depending on the number of decimals)

Answer:

Kinetic - Kinetic energy is the energy of motion

Explanation:

Thermal energy - heat energy

Potential energy - energy that is stored

Hope this helped!

Have a supercalifragilisticexpialidocious day!

Answer:

I think it is b

Explanation:

Answer:

Natural resource professional

Explanation:

The job title that describes a person with a career in green energy is a hydroelectric technician. The correct option is c.

Green energy is renewable energy and these energies are produced by renewable resources. Renewable resources are the resources that will not be reduced, and these natural resources are present, and these energies can reproduce again by these resources.

The hydroelectric technician is the person who checks the technical problems of a hydroelectric power plant. Hydroelectricity is produced by water.

This is a renewable resource, and it does not produce any kind of pollution, So a hydroelectric technician will be a job title that describes a person with a career in green energy.

Therefore, the correct option is c., hydroelectric technician.

To learn more about renewable energy, refer to the link:

https://brainly.com/question/17373437

#SPJ2

The question is incomplete. Your most probably complete question is given below:

Elevator installer

sewing machine operator

hydroelectric technician

animal trainer

Answer:

jsidndnxjxixdjdbsjsjdidnsjdjdidndjd

Answer:

C

Explanation

On the reactants side there is 4 Hydrogen atoms in total and two oxygen atoms on the left however on the right there is two hydrogen atoms and one oxygen atom. Leaving this equation unbalanced

The equation that is NOT balanced is [tex]\rm 2H_2 + O_2\rightarrow H_2O[/tex]. The correct answer is option C.

In a balanced chemical equation, the number of atoms of each element on the reactant side must be equal to the number of atoms of each element on the product side.

In conclusion, equation C.  [tex]\rm 2H_2 + O_2\rightarrow H_2O[/tex] is the one that is NOT balanced. It has an unequal number of oxygen atoms on the reactant and product sides.

Learn more about Balanced chemical equation here:

https://brainly.com/question/29130807

#SPJ6

ionic bonds form between metals which form positively charged ions and nonmetals which form negatively charged ions.

The specific heat capacity of the metal : c = 2.59  J/g °C

Given

5 g sample

35 ml water = 35 g

Required

The specific heat capacity of the metal

Solution

Heat can be formulated :

Q = m.c.Δt

Q in = Q out

Q absorbed = Q released

Q water = Q metal

35 g x 4.184 J/g °C x (26.5-20)= 5 x c x (100-26.5)

951.86 J = 367.5 x c

c = 2.59  J/g °C

We, know molecular mass of water is, M = 16 g/mol .

Given mass of water, m = 18 g.

We know, number of moles is given by :

[tex]n = \dfrac{18\ g}{16 \ g/mol}\\\\n = 1.125\ moles[/tex]

Now, 1 mole of any compound contains 6.022 × 10²³ molecules.

So, number of moles in 1.125 moles of water is 1.125 × 6.022 × 10²³ =

6.77 × 10²³ molecules.

Hence, this is the required solution.

Answer:

The new temperature will be 565.83 K.

Explanation:

Gay Lussac's law establishes the relationship between the temperature and the pressure of a gas when the volume is constant. This law says that the pressure of the gas is directly proportional to its temperature. This means that if the temperature increases, the pressure will increase; or if the temperature decreases, the pressure will decrease.

In other words, Gay-Lussac's law states that when a gas undergoes a constant volume transformation, the ratio of the pressure exerted by the gas temperature remains constant:

[tex]\frac{P}{T} =k[/tex]

When an ideal gas goes from a state 1 to a state 2, it is true:

[tex]\frac{P1}{T1} =\frac{P2}{T2}[/tex]

In this case:

Replacing:

[tex]\frac{180 kPa}{291 K} =\frac{350 kPa}{T2}[/tex]

Solving:

[tex]T2=350 kPa*\frac{291 K}{180 kPa}[/tex]

T2= 565.83 K

The new temperature will be 565.83 K.

Answer:

construction aka A

Explanation:

got 100

Explanation:

On the periodic table, we can find a wide range of elements from alkali metals, to the alkali earth metals, transition metals and through to the noble gases.

The alkali metals are found on the first group in the periodic table and they are group of metals. Also, the transition elements are also a group of metals.

Answer:

5.5 mol H2O

Explanation:

Given over what you need and then mole ratio of coefficients in the balanced equation then cross multiply and do PEMDAS for that, and then you got your answer :) hope this helped.

Answer:

A, 4,3,2

B, 1,1,2

C, 1,1,1,2

Answer:

1125.75 cm³

Explanation:

We are given;

Initial volume; V1 = 673 cm³

Initial temperature; T1 = 275 K

Final temperature; T2 = 460 K

From Charles law, we can find the new volume from;

V1/T1 = V2/T2

V2 = (V1 × T2)/T1

V2 = (673 × 460)/275

V2 = 1125.75 cm³

Answer:

There is an abundance of technology to help students become more resourceful and productive. For example, mind mapping can help kids better understand problems and devise plans by visualizing connections, outlining different sides of issues, and determining next steps.

Explanation:

Answer:

D if I’m correct

Explanation:

Answer:

sediments

Explanation:

Na₂C₂O₄(aq) + Pb(NO₃)₂⇒PbC₂O₄(s) + 2NaNO₃(aq)

Given

Word equation

Required

Balanced equation

Solution

Convert to skeleton equation

Na₂C₂O₄(aq) + Pb(NO₃)₂⇒PbC₂O₄(s) + NaNO₃(aq)

Balanced equation

Give a coefficient

Na₂C₂O₄(aq) + aPb(NO₃)₂⇒bPbC₂O₄(s) + cNaNO₃(aq)

Make an equation

C, left = 2, right =2b⇒2b=2⇒b=1

Na, left = 2, right = c⇒c=2

O, left = 4+6a, right = 4b+3c⇒4+6a=4b+3c⇒4+6a=4.1+3.2⇒6a=6⇒a=1

The equation becomes :

Na₂C₂O₄(aq) + Pb(NO₃)₂⇒PbC₂O₄(s) + 2NaNO₃(aq)