Velocity is a description of an object’s _____.

Answer:

10N

Explanation:

Applying the Hooke law:

F = kx

F: Force

k: stiffness coefficient

x: stretched distance

F = 10N/m x 1m = 10N

Answer:

12.5 m/s

Explanation:

a = Δv / Δt

2.5 m/s² = Δv / 5 s

Δv = 12.5 m/s

Answer:

=33 .3×10^6Ω

=33.3M Ω

Explanation:

We were told to calculate the Resistance value,

Given the heart pacemaker fires as 72 times a minute, which is the time constant

Then we can convert the pacemaker fires of 72 times a minute to seconds for unit consistency.

1 minutes= 60secs

Then ,Time constant τ=60secs/72=0.8333 seconds

Time constant τ can be calculated using the formula below

τ= RC

Where R= resistance

C = capacitance

Then making RESISTANCE subject of formula we have

R=τ/C

But Capacitance=25.0-nF = 25×10^25F

Substitute the values we have

R=0.833/25×10^25

=33 .3×10^6 Ω

But can still be converted to M Ω= 33.3M Ω

Therefore, the resistance is 33 .3×10^6 Ω or 33.3M Ω

NOTE: 1M= 10^6

The value of the resistance will be "3.33×10⁷ Ω".

According to the question,

Capacitor, C = 25.0 nF

60 sec - 72 fires

now,

Time for 1 fire,

[tex]t = \frac{60}{72}[/tex]

 [tex]= \frac{5}{6} \ sec[/tex]

Now,

⇒            [tex]V = V_0 (1-e^{-\frac{t}{RC} })[/tex]

     [tex]0.632 V_0=V_0(1-e^{\frac{-\frac{5}{6} }{R.25 n C} })[/tex]

[tex]e^{-\frac{1}{R\times 30\times 10^{-9}} } = 1-0.632 = 0.368[/tex]

                  [tex]= 2.72[/tex]

By taking "log" both sides,

⇒ [tex]ln \ e^{\frac{1}{R\times 30\times 10^{-9}} } = ln \ 2.72[/tex]

hence,

The Resistance be:

⇒ [tex]R = \frac{10^9}{30}[/tex]

       [tex]= 3.33\times 10^7 \ \Omega[/tex]

Thus the above approach is right.

Find out more information about resistance here:

https://brainly.com/question/76343

Answer:

borosilicate glass

Explanation:

headlamp glass is a borosilicate glass by gravity feed

Answer:

O- to track how fast a heart beats

Explanation:

Answer:

5000 N/m².

Explanation:

The following data were obtained from the question:

Density (d) = 1000 kg/m³

Acceleration due to gravity (g) = 10 N/kg

Height (h) = 50 cm = 50/100 = 0.5 m

Pressure (P) =.?

Pressure is related to density and height by the following equation:

P = dgh

Where

P is the pressure.

d is the density.

g is the acceleration due to gravity.

h is the height.

With the above formula, we can obtain the pressure at the bottom of the cup as follow:

P = dgh

P = 1000 x 10 x 0.5

P = 5000 N/m²

Therefore, the pressure at bottom of the cup is 5000 N/m².

Answer:

Space in the astronomy and cosmology space is 3 dimensional region and earth atmosphere end is called space.

Explanation:

Space is the everything of the top earth atmosphere moon, starts, milky way, black hole and GPS satellites an distant,space also called between stars,moon,planet.

Space is all the extends far in all directions, space is finite unbound space surface of the earth has finite are no beginning or not end.

Space contains there are three dimensions is called 3 D space,an space is to refer an interval during signal transmitted also used by the character, bytes, words and octets in  digital signal.

space is that term can refer to various in science, communications and mathematics,and maintain orbits for responsible time, space is usually to begin at the lowest attitude satellites  can maintain orbits.

space coordinates are uniquely define the location of any particular point  and that continuum requires more than coordinates,and the number of dimensions and conventional space or digital communications during the  signal represents logic is 0 words in a digital signal.  

Answer:

(b) constant

Explanation:

parallel to t - axis means, at all the times, the s component does not change, it remains same, i. e., the speed is constant.

:-)

Answer:

zero

Explanation:

if the velocity time graph is parallel to the time axis its mean body has not covered the path in other words body is at rest.So the velocity of the body should be zero

so the speed is zero

hope my answer will help u

Answer:

Infrasound vs. Ultrasound: Infrasound is sound that is below the lower limit of human hearing, below 20 Hz, and ultrasound is above the upper limit of human hearing, above 20,000 Hz.  Individuals use infrasound - this recurrence run for checking seismic tremors and volcanoes, graphing rock and oil developments underneath the earth. Infrasound is described by a capacity to get around hindrances with little scattering.  

For instance, a few creatures, for example, whales, elephants and giraffes convey utilizing infrasound over significant distances. Torrential slides, volcanoes, seismic tremors, sea waves, water falls and meteors produce infrasonic waves. Symptomatic ultrasound, additionally called sonography or demonstrative clinical sonography, is an imaging technique that utilizes high-recurrence sound waves to create pictures of structures inside your body. The pictures can give important data to diagnosing and treating an assortment of ailments and conditions.

Explanation:

idk how many words this is but its a start for u to add on to and i hope this helps and its in my own words - pls mark me brainiest

Answer:

Explanation:

A concave mirror is a curved mirror that is coated outwards. The outer part of the mirror is always coated. The nature of image formed by an object placed in front of a concave mirror can be real or virtual depending on the distance of the object on the axis from the mirror. The only time the object produces a virtual image is when it is placed between the focus and the pole of the mirror. The virtual image formed is a "MAGNIFIED and upright image"

For a convex mirror, the inner part is always coated and the nature of the image formed by the object doesn't depend on the distance between the image and the mirror. No matter where the object is placed, the image formed will always be virtual, upright and DIMINISHED. This means that magnification is always less than 1.

For a plane mirror, the nature of the image produced by a plane mirror also virtual because it is always formed behind the mirror. The size of the image formed is always THE SAME as that of the object. This means that the magnification is always equal to 1.

a) In summary, the difference between virtual images produced by concave, plane, and convex mirrors is that virtual images produced by concave mirror are MAGNIFIED, virtual images produced by plane mirror are THE SAME SIZE as that of the object and virtual images produced by convex mirrors are always DIMINISHED.

b) Magnification is defined as the ratio of the image distance to the object distance. Mag = v/u

Note that object distances are always positive, hence it is only the image distance that can either be positive or negative which in turn affects the magnification causing it to be positive or negative.

Negative image distance shows that the image is virtual while positive image distance shows that the image is real.

A negative magnification therefore shows that the nature of the image is a virtual image.

Answer:

is a force that attracts any two objects with a mass

Answer:

Diffusion depends among many other things also upon the concentration gradient of the diffusing substance.For example if there are two boxes with given particles first isolated from each other and if they are bought in contact, then there is a net diffusion of particles from a box with higher concentration of particles to box with lower concentration. And also diffusion rate depends at any instant directly on the concentration difference between them at that instant.Now the vaccum is equivalent to an empty box which means with this one leads to a maximum diffusion rate when bought in contact with a box with particles because there is maximum concentration difference.That is vaccum is empty ( except for energy perturbations and a small concentration of particles which will be zero for our purpose) and any bunch of particles will find least resistance to diffuse as just outside this bunch there is ‘0' concentration of the particles.

Answer:

C)-16 N

Explanation:

concepts used

force = mass* acceleration

equation of motion

[tex]v^2 = u^2 + 2as[/tex]

where v is the final velocity

u is the initial velocity

and s is the distance moved

______________________________________________

Given

mass = 1 kg

initial velocity (u) = 40m/s

final velocity (v) = 0 as stones comes to rest

distance moved by stone (s) = 50m

using  [tex]v^2 = u^2 + 2as[/tex]

[tex]0 = 40^2 +2a*50\\=> -1600 = 100a\\=> a = -1600/100 = -16[/tex]

Thus, acceleration is -16 m/s^2

here acceleration is negative as force of friction is opposing the motion.

Force of friction = mass of stone * acceleration of stone

Force of friction = 1*-16 kgm/s^2 = -16N       ( kgm/s^2 = 1 N)

Thus, option c -16N is correct choice.

Answer:

Option B. 2 A.

Explanation:

The following data were obtained from the question:

Resistance 1 (R1) = 1 Ω

Resistance 2 (R2) = 2 Ω

Resistance 3 (R3) = 3 Ω

Potential difference (V) = 12 V.

Current through the 3 Ω (I3) =?

Next, we shall determine the total resistance of the circuit.

This can be obtained as follow:

Resistance 1 (R1) = 1 Ω

Resistance 2 (R2) = 2 Ω

Resistance 3 (R3) = 3 Ω

Total resistance (R) =.?

R = R1 + R2 + R3

R = 1 + 2 + 3

R = 6 Ω

Next, we shall determine the current flowing in the circuit.

This can be obtained as follow:

From ohm's law,

Voltage (V) = current (I) x resistance (R)

V = IR

Potential difference (V) = 12 V.

Resistance (R) = 6 Ω

Current (I) =?

V = IR

12 = I x 6

Divide both side by 6

I = 12/6

I = 2 A.

Since the circuit is in series connection, therefore, the same current will flow through each resistor.

Therefore, the current through the the 3 Ω load is 2 A.

Answer: Alicia and the president do not have enough of a particular resource. Alicia doesn’t have enough time, and the president doesn’t have enough money.

Explanation: This is Plato's sample answer.

Answer:

B. A magnet being moved into or out of the coil

Explanation:

Faraday law of electromagnetic induction states that when there is change in flux , an emf is produced . Among the given instances , only in case of B , flux is changing . So current will be induced in the coil . We shall see how it takes place .

A wire carrying constant current will produce magnetic flux in nearby coil but there is no change in flux because current as well as position of wire with respect to coil are  not changing  .

Passing of magnetic field through a stationary coil produces flux in the coil but here too there is no change in flux so no current will be induced .

A magnet positioned near a coil creates magnetic flux in the coil but the magnitude of flux remains constant so no change in flux and no creation of induced current .

Answer:

A dark fringe

Explanation:

The electric force is:

F = k q₁ q₂ / r²

F = (9×10⁹ Nm²/C²) (-1.6×10⁻¹⁹ C) (+1.6×10⁻¹⁹ C) / (6.5×10⁻¹¹ m)²

F = 5.4×10⁻⁸ N

The gravitational force is:

F = G m₁ m₂ / r²

F = (6.67×10⁻¹¹ Nm²/kg²) (9.11×10⁻³¹ kg) (1.67×10⁻²⁷ kg) / (6.5×10⁻¹¹ m)²

F = 2.40×10⁻⁴⁷ N

Answer:

v1 = −2.201946 m/s ( to the left)

v2 = 0.7780534 m/s ( to the right)

Explanation:

Given the following :

Mass of first glider (m1) = 0.149kg

Initial Speed of first glider (u1) = 0.710 m/s

Mass of second glider (m2) = 0.308kg

Initial Speed of second glider (u2) = 2.27m/s

For elastic collision:

m1u1 + mu2u2 = m1v1 + m2v2

Where V1 and v2 = final velocities if the body after collision.

Taking right as positive ; left as negative

u1 = 0.710m/s ; u2 = - 2.27m/s

u1 - u2 = - (v1 - v2)

0.710 - - 2.27 = - v1 + v2

v2 - v1 = 2.98 - - - - (1)

From:

m1u1 + mu2u2 = m1v1 + m2v2

(0.149 * 0.710) + ( 0.308 * - 2.27) = (0.149 * v1) + (0.308 * v2)

0.10579 + (-0.69916) = 0.149 v1 + 0.308v2

−0.59337 = 0.149 v1 + 0.308v2

Dividing both sides by 0.149

v1 + 2.067v2 = −0.59337 - - - - - (2)

From (1)

v2 = 2.98 + v1

v1 + 2.067(2.98 + v1) = −0.59337

v1 + 6.16 + 2.067v1 = −0.59337

3.067v1 = −0.59337 - 6.16

3.067v1 = −6.75337

v1 = −6.75337 / 3.067

v1 = −2.201946 m/s ( to the left)

From v2 = 2.98 + v1

v2 = 2.98 + (-2.201946)

v2 = 0.7780534 m/s ( to the right)

Answer:

answer= 73.1256 [tex]i[/tex]

Explanation:

The electric charge linear density is equal to 8.8 x[tex]10^{-9}[/tex]

the length of the string is 3.1m

The magnitude of the electric field at the length of the string equal to 5.2 meters can be calculated with the formula ;

- E = λ / 4πε₀ [ [tex]l[/tex]  / α ( α +

Solution:

E =  8.8 x[tex]10^{-9}[/tex] / 4πε₀ [ 3.1/ 5.2( 5.2 + 3.1) ] [tex]i[/tex]

= 1018.0995 [0.07183] [tex]i[/tex]

=  73.1256 [tex]i[/tex]

Answer:

The cue ball crashing into the eight balls on a pool table.

Explanation:

Elastic and inelastic collisions are two types of collisions.

For elastic collision, both the momentum and the kinetic energy before and after the collision remains conserved.

Out of the given options, the option that shows an example of an elastic collision is option A " The cue ball crashing into the eight balls on a pool table." All the eight balls after crashing moves with different velocity.

Answer:

The nail exerts an equal force on the hammer in the opposite direction.

Explanation:

The Newtons third law states that there is an equal an opposite reaction for every action. When hammer pushes the nail, the nail will push the hammer back in opposite direction. When the hammer hits a nail then nail will exert the equal and opposite force to the hammer. These both objects will exert force on each other in opposite directions.

Hello, I am BrotherEye

Answer:

Answers are

1. "The nail exerts an equal force on the hammer in the opposite direction."

2. "500 N"

3. "The iron piece exerts a force of 1 N on the magnet in the opposite direction."

4. "When mass moves closer to the point of rotation, rotational inertia decreases."

5. "The skater spins slower because his rotational inertia has increased."

Explanation:

Explanation:

SI is the international system of units

It was developed to express magnitudes and quantities

Answer:

a) 4 m

b) 24 m/s

c) 0.174 kg

Explanation:

a) Tension in string equation

The information given are;

The wavelength is equal to the rope length , λ = L

The tension = 100 N

The displacement of a point on the rope is y(x, t) = (0.1 m) sinπ x sin 12πt

Given that the wavelength = the length of the rope, the rope is on second harmonic

L = 2·n and the length of the wire = 2 × 2 = 4 m given the dimensions are in meters

b) Where k = 2·π/λ

v = ω/k = 12π/(2·π/λ)= (12π/2π)×λ = 24 m/s

c) f = v/λ = 24/4 = 6 Hz

[tex]f = \dfrac{\sqrt{\dfrac{T}{m/L} } }{2L} = \dfrac{\sqrt{\dfrac{100}{m/4} } }{2 \times 4}[/tex]

[tex]6 \times 8= {\sqrt{\dfrac{100}{m/4} } }[/tex]

m/4 = 100/2304

m = 0.174 kg.

Answer:

585×10⁸ m

Explanation:

Distance = rate × time

d = (2.998×10⁸ m/s) (3.25 min) (60 s/min)

d = 585×10⁸ m

Answer:

10 seconds

Explanation:

because the cat is moving one m/s slower than the dog, the dog has a relative speed of 1 m/s. 10 meters would take 10 seconds for the dog to cover

Answer:

Explanation: pressure = force / area

Rearrange to get: force = pressure x area. 900 cm2 = 0.09 m2

force = 90 x 0.09

= 8.1 N

Answer:

λ = 2.5m

Explanation:

Given the following :

Speed of sound (v) = 10m/s

If 5 oscillations pass through a point in 0.5seconds;

Time taken (period) for 1 oscillation is :

Number of oscillations / total time taken

5 / 0.5 = 0.25 seconds

Wavelength, period and Velocity are related by the formula:

v = λ / T

λ = v * T

λ = 10 * 0.25

λ = 2.5 m

Answer:

5 W

Explanation:

The formula of the power is:

● P = W/t

W is the work and t is the time needed to do it(in seconds)

Let's calculate first the work that the force exerced:

W = Vector F . Vector d

D is the distance ( here 400 cm wich is 4 m)

Make a representation to see how are the vectors F and V.(picture below)

The vector F and d are colinear since Den is pushing the desk on the ground.

● W = 4 × 10 = 40 J

J is Joule

■■■■■■■■■■■■■■■■■■■■■■■■■■

● P = W / t

● P = 40/ 8

● P = 5 W

The power output of the force of 10N for 8 seconds to move the desk is 5 watts. Thus, the correct option is B.

Power is the amount of energy which is transferred or converted per unit time. In the SI system of Units, the unit of power is the watt, which is equal to one joule per second time.

We Know, P = W/t

where, P = Power,

W = Work done,

t = Time taken

P = F × s/t

where, F = Force applied,

s = distance travelled,

t = time taken

Here, F = 10N

s = 400cm = 4m

t = 8 sec

Substitute their values into the expression,

P = 10 × 4/8

P = 10 × 1/2

P = 5 Watt

So, the power output will be 5 watts.

Therefore, the correct option is B.

Learn more about Power here:

https://brainly.com/question/287674

#SPJ6

Answer:

The angular frequency of the block is ω = 5.64 rad/s

Explanation:

The speed of the block v = rω where r = amplitude of the oscillation and ω = angular frequency of the oscillation.

Now ω = v/r since v = speed of the block = 62 cm/s and r = the amplitude of the oscillation = 11 cm.

The angular frequency of the oscillation ω is

ω = v/r

ω = 62 cm/s ÷ 11 cm

ω = 5.64 rad/s

So, the angular frequency of the block is ω = 5.64 rad/s