URGENT PLS HELP

Given f(y)=2y^2 - 4y, and h(x)= x^2 - 1, determine f(h(x))

Answer:

see below

Step-by-step explanation:

Pi is approximately 3.14

4*3.14 =12.56

So about halfway between 12 and 13

Answer:

y=-1/2x+-1

Step-by-step explanation:

try desmos with this equation.

y=mx+b

m=the slope which is -1/2. It goes down 1 it is negative because it is going down, and to the right 2.

b=y-intercept meaning the point which the line crosses the line y .-1

You end up at the point (5, 5).

Answer:

c. The researchers are 95% confident that the true mean difference in ALT values between the population of drinkers and population of non-drinkers is between 24.32 and 39.68.

Step-by-step explanation:

Given :

Groups:

x1 = 69 ; s1 = 19 ; n1 = 38

x2 = 32 ; s2 = 14 ; n2 = 37

1 - α = 1 - 0.95 = 0.05

Using a confidence interval calculator to save computation time, kindly plug the values into the calculator :

The confidence interval obtained is :

(24.32 ; 39.68) ; This means that we are 95% confident that the true mean difference in ALT values between the two population lies between

(24.32 ; 39.68) .

Answer:

10

Step-by-step explanation:

ok so you do 12/30 and u get a 0.4 ratio. boom multiply 0.4 by 25 and u get 10. so boom the length is 10

Answer:

XY=10

Step-by-step explanation:

Since they are similar the ratio between each sides should be the same.

Ratio is .4. Found by dividing 12/30.

Multiply .4 by 25= 10

Answer:

-2pi/3

Step-by-step explanation:

y = 2 cos 3(x + 2π∕3) +1

y = A sin(B(x + C)) + D  

amplitude is A

period is 2π/B

phase shift is C (positive is to the left)

vertical shift is D

We have a shift to the left of 2 pi /3

Answer:

A

Step-by-step explanation:

The standard cosine function has the form:

[tex]\displaystyle y = a\cos (b(x-c)) + d[/tex]

Where |a| is the amplitude, 2π / b is the period, c is the phase shift, and d is the vertical shift.

We have the function:

[tex]\displaystyle y = 2 \cos 3\left(x + \frac{2\pi}{3}\right) + 1[/tex]

We can rewrite this as:

[tex]\displaystyle y = \left(2\right)\cos 3\left(x - \left(-\frac{2\pi}{3}\right)\right) + 1[/tex]

Therefore, a = 2, b = 3, c = -2π/3, and d = 1.

Our phase shift is represented by c. Thus, the phase shift is -2π/3.

Our answer is A.

Answer:

3 tenths means 3 over ten represented as as 3/10 and 10 has one zero I.e tenth different from hundredths which has 2 zeros so our decimal shld also have one zero which is 0.3...so 0.3 is the answe hope it helps❤

Answer:

f'(1) = 7/2

Step-by-step explanation:

We are given the function: [tex]f'(x)=\frac{7}{2\sqrt{x} }[/tex]

To find f'(1), substitute the value for x and evaluate it.

[tex]f'(1)=\frac{7}{2\sqrt{1} }\\\\f'(1)=\frac{7}{2(1)}\\\\f'(1)=\frac{7}{2}[/tex]

Therefore, f'(1) = 7/2.

Answer:

[tex]2^{3} * 3 * 5[/tex]

Step-by-step explanation:

Answer:

[tex]C=1.15cents[/tex]

Step-by-step explanation:

Generally the equation for is mathematically given by

Charge Power P=4watts

Rate r=12cents/hour

Time consumed T=24

Generally

Power consumed by smartphone in 24 hours

[tex]P_t=P*T\\\\P_t=24*4[/tex]

[tex]P_t=0.096kwh[/tex]

Therefore the Cost will be

[tex]C=12*0.096kwh[/tex]

[tex]C=1.15cents[/tex]

Answer:

Area of yellow portion =54 in

Find the intersection of the two planes. Do this by solving for z in terms of x and y ; then solve for y in terms of x ; then again for z but only in terms of x.

-4x + 2y - z = 1   ==>   z = -4x + 2y - 1

3x - 2y + 2z = 1   ==>   z = (1 - 3x + 2y)/2

==>   -4x + 2y - 1 = (1 - 3x + 2y)/2

==>   -8x + 4y - 2 = 1 - 3x + 2y

==>   -5x + 2y = 3

==>   y = (3 + 5x)/2

==>   z = -4x + 2 (3 + 5x)/2 - 1 = x + 2

So if we take x = t, the line of intersection is parameterized by

r(t) = ⟨t, (3 + 5t )/2, 2 + t⟩

Just to not have to work with fractions, scale this by a factor of 2, so that

r(t) = ⟨2t, 3 + 5t, 4 + 2t⟩

(a) The tangent vector to r(t) is parallel to this line, so you can use

v = dr/dt = d/dt ⟨2t, 3 + 5t, 4 + 2t⟩ = ⟨2, 5, 2⟩

or any scalar multiple of this.

(b) (-1, -1, 1) indeed lies in both planes. Plug in x = -1, y = 1, and z = 1 to both plane equations to see this for yourself. We already found the parameterization for the intersection,

r(t) = ⟨2t, 3 + 5t, 4 + 2t⟩

Answer:

y = 7/8x - 1

Step-by-step explanation:

graph shown

a) The slope of the line MU is [tex]\frac{4}{5}[/tex]

b) The distance between the coordinates of the line MU is √41

c) There are differences and similarities between (a) and (b).

The slope of a line is used to describe how steep the line is. This is expressed mathematically as;

[tex]m=\frac{y_2-y_1}{x_2-x_1}[/tex] where:

(x1, y1) and (x2, y2 are the coordinate points)

From the graph shown, we are given the coordinates M(-1, 1) and U(4, 5)

a) The slope of the line MU will be expressed as;

[tex]m=\frac{5-1}{4-(-1)}\\m=\frac{4}{5}[/tex]

The slope of the line MU is [tex]\frac{4}{5}[/tex]

The formula for calculating the equation of a line is expressed as y = mx + b

b is the y-intercept.

Substitute m = 4/5 and (-1, 1) into the expression y = mx + b

[tex]1 = -(4/5) + b\\1 = -4/5 + b\\b = 1 +4/5\\b = \frac{5+4}{5} \\b = \frac{9}{5}[/tex]

Get the required equation.

Substitute m = 4/5 and b = 9/5 into y = mx + b

[tex]y=\frac{4}{5}x+\frac{9}{5}\\5y=4x+9\\5y-4x=9[/tex]

The required equation of the line is 5y - 4x = 9

b) The formula for calculating the distance between two points is expressed as;

[tex]D=\sqrt{(x_2-x_1)^2+(y_2-y_1)^2}[/tex]

Substitute the given coordinates in (a) to get the distance MU

[tex]MU=\sqrt{(4-(-1))^2+(5-1)^2}\\MU=\sqrt{(4+1)^2+(5-1)^2}\\MU=\sqrt{(5)^2+(4)^2}\\MU=\sqrt{25+16}\\MU=\sqrt{41}[/tex]

Hence the distance MU is √41

c) There are similarities and differences in the calculations in (a) and (b). The similarities lie in the usage of the change in the coordinates for the calculation of the slope and the distance.

The difference is that we do not need the slope of the line to calculate the distance MU but the slope y-intercept is required to calculate the equation of the line.

Learn more about lines here: https://brainly.com/question/12441680 and https://brainly.com/question/15978054

I believe the question is:

What is the solution to 5x + 1 +9 - 3

In this case, we solve for X.

5x + 1 + 9 - 3

5x + 10 - 3

5x + 7

5x = -7

x = -7/5

Unfortunately, It is not one of the answer choices it looks like.

Maybe you should reword your question but hopefully this is correct.

If you meant to say 5x+1 + 9 < 3 --> 5x + 10 < 3 --> 5x < -7 --> x < -7/5

The value of x in a given expression is -7/5.

We have given that,

5x + 1 + 9 - 3

We have to determine the value of x.

A variable is any factor, trait, or condition that can exist in differing amounts or types. Scientists try to figure out how the natural world works

In this case, we solve for X.

5x + 1 + 9 - 3

5x + 10 - 3

5x + 7

5x = -7

x = -7/5

If you meant to say 5x+1 + 9 < 3 --> 5x + 10 < 3 --> 5x < -7 --> x < -7/5.

Therefore we get the value of x is -7/5.

To learn more about the value of the variable visit:

https://brainly.com/question/5030068

#SPJ2

Answer:

Area of the base = (8×6)/2 = 24 yd²

Height of the prism = 8 yd

Perimeter of the base = 8+6+10 = 24 yd

Surface area = 2B + Ph = (2×24)+(24×8) = 48+192 = 240 yd²

Answer:

The answer is "Specific treatment levels".

Step-by-step explanation:

When we experimenting with 'level' which is related to the quantity or magnitude of treatment. For this part of an experiment or study, a group or individual is exposed to a specified set of circumstances. For example: If four categories are exposed to different doses of a given drug, then each dose reflects a level of a treatment factor in the model.

Answer:

Hello,

Step-by-step explanation:

Let say t the time the hose is left running

235 ≤ t < 245 (in min)

Let say d the amount of water coming out of the hose each minute

2.05 ≤ d < 2.15 (why d : débit in french)

235*2.05 ≤ t*d < 245*2.15

481.75 ≤ t*d < 526.75    (litres)

Answer:

Lower bound: [tex]495\; \rm L[/tex] (inclusive.)

Upper bound: [tex]505\; \rm L[/tex] (exclusive.)

Step-by-step explanation:

The amount of water from the hose is the product of time and the rate at which water comes out.

When multiplying two numbers, the product would have as many significant figures as the less accurate factor.

In this example, both factors are accurate to two significant figures. Hence, the product would also be accurate to two significant figures. That is:

[tex]240 \times 2.1 = 5.0 \times 10^{2}\; \rm L[/tex] ([tex]500\; \rm L[/tex] with only two significant figures.)

Let [tex]x[/tex] denote the amount of water in liters. For [tex]x\![/tex] to round to [tex]5.0 \times 10^{2}\; \rm L[/tex] only two significant figures are kept, [tex]495 \le x < 505[/tex]. That gives a bound on the quantity of water from the hose.

The 15 percent-off $123 or 15 percent discount for a item in which the original price is $123 is: $18.45

Using this formula

Amount = Original Price x Discount

Let plug in the formula

Amount= 123 x 15 / 100

Amount = 1845 / 100

Amount = $18.45

Inconclusion the 15 percent-off $123 is $18.45.

Learn more about 15 percent-off $123 here:https://brainly.com/question/23192029

Answer:

3.143

Step-by-step explanation:

Since you're rounded it to the third decimal, you look at the fourth one. And since the fourth one is 8, ur going round 2, which is the third decimal to 3.

Answer:

The answer is below

Step-by-step explanation:

In this question, to round three decimal place, we need to count three numbers after the dot.

Here..

the three numbers are 142

so after that we round it, so first of all we ignore 1 and, and focus on the number 2 and 4.

and if the number is below 5, it is rounded to the last number, but if the number is 5 or more than it, then we round it to the next number.

For example

142 - here we have 2, which is below 5, so we round it to '140'

where as if we have..

147 - here we have 7, which is above 7, so we round it to '150'

____________________________________________________________

So in this problem we round 142, so the number 2 is below 5 so it is round to 140

therefore the answer is - 3.14

Answer:

[tex]x = \frac{4 \sqrt{3} }{3} [/tex]

Step-by-step explanation:

The explanation is in the picture!❤

Step-by-step explanation:

A ball is thrown straight up from a rooftop 320 feet high. The formula below describes the ball's height above the ground, h, in feet, t seconds after it was thrown. The ball misses the rooftop on its way down and eventually strikes the ground. How long will it take for the ball to hit the ground? Use this information to provide tick marks with appropriate numbers along the horizontal axis in the figure shown.

h=-16t^2+16t+32

Answer:

The distance between two points (x₁, y₁) and (x₂, y₂) is given by:

[tex]d = \sqrt{(x_2 - x_1)^2 + (y_2 - y_1)^2}[/tex]

Now we know that point D, which we can write as (x, y), is at a distance of 8 units from the origin.

Where the origin is written as (0, 0)

We also know that point D is 6 units away along the y-axis.

Then point D could be:

(x, 6)

or

(x, -6)

Now, let's find the x-value for each case, we need to solve:

[tex]8 = \sqrt{(x - 0)^2 + (\pm6 - 0)^2}[/tex]

notice that because we have an even power, we will get the same value of x, regardless of which y value we choose.

[tex]8 = \sqrt{x^2 + 36} \\\\8^2 = x^2 + 36\\64 - 36 = x^2\\28 = x^2\\\pm\sqrt{28} = x\\\pm 5.29 = x[/tex]

So we have two possible values of x.

x = 5.29

and

x = -5.29

Then the points that are at a distance of 8 units from the origin, and that are 6 units away along the y-axis are:

(5.29, 6)

(5.29, -6)

(-5.29, 6)

(-5.29, -6)

Answer:

The new price is 66% off the original not 75% off

Step-by-step explanation:

Let x be the original price

First take 60 percent off

x - x*60% = new price

x- .60x = .40x

The new price is .40x

Then take 15 % off

(.40x) - (.40x)*15%

.40x - .40x*.15

.40x - .06x

.34x

100 -.34 =.66

The new price is 66% off the original not 75% off

Step-by-step explanation:

[tex](2 - 1 \frac{3 {3}^{2} }{?} [/tex]

Answer:

[tex]y=2[/tex]

Step-by-step explanation:

To solve this question, we can use the point-slope formula as we are given points on the line. This is the format:

[tex]y-y_{1} =m(x-x_{1} )[/tex]

The first step is to find the slope by substituting in two of the points. Let's try using (7,2) and (3,2):

[tex]2-2=m(7-3)\\0=4m\\m=0[/tex]

So now we have found that our slope is 0 meaning it is a flat line (shown by the unchanging y values through all three points).

The form for line equations is:

[tex]y=mx+c[/tex]

However, since our m=0, it is simplified to this:

[tex]y=c[/tex]

The y-value for all the points is 2, meaning c=2 (as it is also the y-intercept)

Therefore our final equation is:

[tex]y=2[/tex]

Hope this helped!

Answer:

y = -3x/2 - 1/2

Step-by-step explanation:

slope m = -3/2

-5 = (-3/2)×3+b

or, b = -1/2

putting it into y = mx + b

y = -3x/2 - 1/2

Answered by GAUTHMATH

Answer:

The function with blue line (see attachment) represents the graph of [tex]f(x) = -4\cdot |x|[/tex] after it is translated 3 units down.

Step-by-step explanation:

Mathematically speaking, a translation in the y-direction is defined by the following expression:

[tex]g(x) = f(x) + k[/tex] (1)

Where:

[tex]g(x)[/tex] - Resulting function.

[tex]f(x)[/tex] - Original function.

[tex]k[/tex] - Translation factor ([tex]k > 0[/tex] - Translation in the +y direction/[tex]k< 0[/tex] - Translation in the -y direction).

If we know that original function is translated 3 units down and [tex]f(x) = -4\cdot |x|[/tex], then the resulting function is:

[tex]g(x) = -4\cdot |x|-3[/tex]

Lastly, we graph both original and resulting functions with the help of a graphing tool, whose outcome is presented in the image attached below:

Please notice that the red line represents the original function, whereas the blue line represents the resulting function.

Answer:

C. rotation 180º about the origin

Step-by-step explanation:

Given

Quadrilaterals GWVY and G'W'V'Y'

Required

Describe the transformation rule

Pick points Y and Y'

[tex]Y = (5,-4)[/tex]

[tex]Y' = (-5,4)[/tex]

The above obeys the following rule:

[tex](x,y) \to (-x,-y)[/tex]

When a point is rotated by 180 degrees, the rule is:

[tex](x,y) \to (-x,-y)[/tex]

Hence, (c) is correct

Answer:

9

Step-by-step explanation:

it's as simple as that 9 is 9 away from 0