Answer:
Ang kasaysayan ng mga laro ay nagmula sa sinaunang nakaraan ng tao. Ang mga laro ay isang mahalagang bahagi ng lahat ng mga kultura at isa sa pinakamatandang anyo ng pakikipag-ugnay sa lipunan ng tao. Ang mga laro ay gawing pormal na pagpapahayag ng paglalaro na nagpapahintulot sa mga tao na lumampas sa agarang imahinasyon at magdirekta ng pisikal na aktibidad. Kasama sa mga karaniwang tampok ng mga laro ang kawalan ng katiyakan sa kinalabasan, napagkasunduang panuntunan, kumpetisyon, magkakahiwalay na lugar at oras, mga elemento ng kathang-isip, mga elemento ng pagkakataon, iniresetang mga layunin at personal na kasiyahan.
Nakukuha ng mga laro ang mga ideya at pananaw sa mundo ng kanilang mga kultura at ipinapasa sa hinaharap na henerasyon. Ang mga laro ay mahalaga bilang mga kaganapan sa pagbubuklod ng kultura at panlipunan, bilang mga tool sa pagtuturo at bilang mga marka ng katayuan sa lipunan. Bilang pampalipas ng oras ng pagkahari at ng mga piling tao, ang ilang mga laro ay naging karaniwang tampok ng kultura ng korte at binigyan din bilang mga regalo. Ang mga larong tulad ni Senet at ang Mesoamerican ball game ay madalas na pinuno ng mitiko at ritwal na relihiyosong kahalagahan. Ang mga larong tulad ng Gyan chauper at The Mansion of Happiness ay ginamit upang magturo ng mga aralin na pang-espiritwal at etikal habang sina Shatranj at Wéiqí (Go) ay nakita bilang isang paraan upang mapaunlad ang madiskarteng pag-iisip at kasanayan sa kaisipan ng mga elite sa politika at militar.
what is most likely to happen during a precipitation reaction
A substance will react with oxygen to form water and carbon. ... dioxide.
Answer:
it will rain and there the other defined for precipitation snow and sleet and hail
Guys I don't know science, if you are intelligent tell me what is science
Explanation:
Science is the pursuit and application of knowledge and understanding of the natural and social world following a systematic methodology based on evidence
Write the structural formula for a primary, a secondary, and a tertiary constitutionally isomeric alcohol of the molecular formula C5H12O.
Answer:
The structures of all isomeric alcohols of molecular formula C5H12O along with their IUPAC names are as shown.
Their classification of primary, secondary, and tertiary alcohols are -
1-pentanol -
2-pentanol -
3-pentanol
2-methylbutan-1-ol
2-methylbutan-2-ol
3-methylbutan-2-ol
3-methylbutan-1-ol
2,2-dimethylpropanol
The concentration of a solute in a solution is greater than the maximum concentration that is predicted from the solute's solubility
an object is in set in ___ by using ___ to enact ___ upon the object.
A. motion,force,energy
B. energy,force,motion
C. Force,motion,energy
D. motion,energy, force
Answer: B. energy, force, motion
An object is set in [tex]\sf\purple{motion}[/tex] by using [tex]\sf\pink{force}[/tex] to enact [tex]\sf\red{energy}[/tex] upon the object.
A. motion, force, energy ✅
[tex]\large\mathfrak{{\pmb{\underline{\orange{Mystique35 }}{\orange{♡}}}}}[/tex]
Gizmo Warm-up Just like students sharing markers, atoms sometimes share or swap electrons. By doing this, atoms form bonds. The Ionic Bonds Gizmo allows you to explore how ionic bonds form. To begin, check that Sodium (Na) and Chlorine (Cl) are selected from the menus at right. Click Play ( ) to see electrons orbiting the nucleus of each atom. (Note: These atom models are simplified and not meant to be realistic.) 1. Each atom consists of a central nucleus and several shells that contain electrons. The outermost electrons are called valence electrons. How many valence electrons does each atom have
Answer: Sodium element has 1 valence electron and chlorine element has 7 valence electrons.
Explanation:
Valence electrons are defined as the electrons that are present in the outermost shell.
An ionic compound is formed when the complete transfer of electrons takes place from one element (usually metals) to another element (usually non-metals).
To know this, we need to write the electronic configuration of each element.
Sodium is the 11th element of the periodic table and has an electronic configuration of [tex]1s^22s^22p^63s^1[/tex]
It has 1 valence electron
Chlorine is the 17th element of the periodic table and has an electronic configuration of [tex]1s^22s^22p^63s^23p^5[/tex]
It has 7 valence electrons
Hence, sodium element has 1 valence electron and chlorine element has 7 valence electrons.
Draw the structure of the neutral organic product formed in the reaction. Do not draw counterions or byproducts.
Answer: Hello the reaction related to your question is missing attached below is the reaction
answer : attached below
Explanation:
The structure of the neutral organic product formed in the reaction is attached below.
The neutral organic product formed is ESTER
The reaction in the question is Anhydride on reaction with alcohol
which has maximum number of molecules among 7 gram of nitrogen, 16 gram of NO2 16 gram of oxygen and 2 gram of hydrogen
Answer:
2 g of H₂
Explanation:
We have:
7 g of N₂
16 g of NO₂
16 g of O₂
2 g of H₂
Let's count to verify the moles:
7 g . 1 mol / 28g = 0.25 moles of nitrogen
16 g . 1 mol / 46g = 0.348 moles of nitrogen dioxide
16 g . 1mol /32g = 0.5 moles
2 g . 1 mol / 2g = 1 mol
The biggest number of moles is in the hydrogen.
1 mol of anything contains NA particles
1 mol of oxygen contains 6.02×10²³ molecules, the maximun number
The molecule β-carotene has λ 450 nm, and ɛ = 15,000 m2 mol-1. Calculate the absorption (A) expected for a solution in which 0.1 mg has been dissolved in 10 ml of water (given: the molecular weight of β-carotene, C40H56, as 536) with a path length of 1 cm. Group of answer choices
Answer: The absorbance for a solution is 0.0028
Explanation:
To calculate the absorption of a solution, the equation by Beer-Lambert law is used:
[tex]A=\varepsilon \times b\times C[/tex]
OR
[tex]A=\varepsilon \times b\times \frac{\text{Given mass of solute}\times 1000}{\text{Molar mass of solute}\times \text{Volume of solution (mL)}}[/tex]
where,
A = absorbance = ?
[tex]\varepsilon[/tex] = molar absorptivity = [/tex]15000m^2mol^{-1}L[/tex]
b = path length = 1 cm = 0.01 m (Conversion factor: 1 m = 100 cm)
Given mass of [tex]\beta-[/tex] carotene = 0.1 mg = 0.0001 g (Conversion factor: 1 g = 1000 mg)
Molar mass of [tex]\beta-[/tex] carotene = 536 g/mol
Volume of solution = 10 mL
Putting values in equation 1:
[tex]A=15000\times 0.01\times \frac{0.0001\times 1000}{536\times 10}\\\\A=0.0028[/tex]
Hence, the absorbance for a solution is 0.0028
Determine the number of moles of C in each sample
2.0 mol CH4, 0.175 mol C2H6,
4.21 mol C4H10, 24.5 mol C8 H18
Explanation:
In [tex]CH_4[/tex]:Given moles = 2.0 moles
1 mole of methane contains 1 mole of carbon and 4 moles of hydrogen
Moles of carbon in [tex]CH_4=(2.0\times 1)=2.0 moles[/tex]
In [tex]C_2H_6[/tex]:Given moles = 0.175 moles
1 mole of ethane contains 2 moles of carbon and 6 moles of hydrogen
Moles of carbon in [tex]C_2H_6=(0.175\times 2)=0.35 moles[/tex]
In [tex]C_4H_{10}[/tex]:Given moles = 4.21 moles
1 mole of butane contains 4 moles of carbon and 10 moles of hydrogen
Moles of carbon in [tex]C_4H_{10}=(4.21\times 4)=16.84 moles[/tex]
In [tex]C_8H_{18}[/tex]:Given moles = 24.5 moles
1 mole of octane contains 8 moles of carbon and 18 moles of hydrogen
Moles of carbon in [tex]C_8H_{18}=(24.5\times 8)=196 moles[/tex]
What law allows calories to be determined by heat (energy) transfer from one substance to another, but it is never destroyed?
Answer:
matter i think
Explanation:
matter i am pretty sure
The law that allows calories to be determined by heat (energy) transfer from one substance to another, but it is never destroyed is first law of thermodynamics.
What is first law of thermodynamics?Energy cannot be generated or destroyed, only changed in form, according to the basic law of thermodynamics.
Energy transfer occurs when mass crosses the control boundary, external work is performed, or heat is transferred across the boundary in any system. These cause the stored energy in the control volume to shift.Hence first law of thermodynamics justify the given statement.
To know more about thermodynamics, visit the below link:
https://brainly.com/question/26035962
#SPJ2
A 1 liter solution contains 0.402 M hypochlorous acid and 0.302 M potassium hypochlorite. Addition of 0.332 moles of hydrochloric acid will:
Answer:
Lower the pH by several units.
Exceed the buffer capacity.
Explanation:
The options are:
*Raise the pH slightly
*Lower the pH slightly
*Raise the pH by several units
*Lower the pH by several units
*Not change the pH
*Exceed the buffer capacity
The hydrochloric acid reacts with potassium hypochlorite to produce hypochlorous acid. The amount of HCl added is the HClO produced and the KClO consumed. As the moles of HCl > moles KClO, all the KClO is consumed exceeding the buffer capacity and lowering the pH by several units.
When optically active (R)-2-methylcyclohexanone is treated with either aqueous base or acid, racemization occurs. Explain.
Answer:
See explanation
Explanation:
Racemization is said to occur when a 1:1 ratio of (+) and (-) enantiomers of a compound are produced in a reaction.
The reaction of optically active (R)-2-methylcyclohexanone with either aqueous base or acid leads to the formation of a planar enol species for reaction with acid and a planar enolate species for reaction with base.
Both reactions involves the formation of achiral species which reverts back to the chiral product with equal chances of the formation of both enantiomers of the product during the process. This leads to racemization of the product in both cases.
Racemization of the optically active (R)-2-methylcyclohexanone results from the production and subsequent interconversion of intermediates during the reaction with an aqueous base or acid. This is due to the inversion of stereochemistry at the chiral centre.
Racemization can happen when an optically active molecule is exposed to an aqueous base or acid because the compound's enantiomers are interconverted. The carbon-carbon bond next to the carbonyl group in (R)-2-methylcyclohexanone breaks as a result of the chemical reaction with the aqueous base or acid. The creation of the negatively charged intermediate known as the enolate ion occurs when a base, such as hydroxide ions, is present and attacking the carbonyl carbon. The carbonyl group can then be reformated by this enolate ion after it has undergone a nucleophilic attack on a proton.
To know more about racemization, here:
https://brainly.com/question/31665891
#SPJ6
Wat are representative elements
Answer:
the representative elements are elements where the the s and p orbitals are filling. The transition elements are elements where the d orbitals (groups 3-11 on the periodic table) are filling, and the inner transition metals are the elements where the f orbitals are filling.
Explanation:
=)
pasagot plizzz kung sino makasagot ng tamang sagot ibebrainliest ko
Answer:
1. B
2.B
3.B
4.C
5.C
Explanation:
I hope this help you
Lee y analiza a detalle el Anexo #1 de este plan de trabajo el cual habla sobre las fuentes alternativas de energía. Posteriormente con la información elabora un cartel o un cuadro sinóptico en tu cuaderno donde organices la información para darla a conocer a los miembros de tu comunidad.
Answer: el texto no es tan claro
Use the observations about each chemical reaction in the table below to decide the sign (positive or negative) of the reaction enthalpy AH and reaction entropy
AS.
Note: if you have not been given enough information to decide a sign, select the "unknown" option.
Answer:
Use the observations about each chemical reaction in the table below to decide the sign (positive or negative) of the reaction enthalpy AH and reaction entropy AS. Note: if you have not been given enough information to decide a sign, select the "unknown" option observations conclusions reaction ΔΗ is (pick one) The reverse of this reaction is always spontaneous. A As is (pick one) This reaction is spontaneous except below ΔΗ is (pick one) 38. °C but proceeds at a faster rate above (pick one) 91. °C As is ΔΗ iS (pick one) Crystallization of a pure compound is C spontaneous only below 146. °C. AS is (pick one) X
Question 6 of 10
What is the relationship between temperature and kinetic energy?
O A. When all molecular motion stops, the temperature stops changing.
OB. As molecules move more quickly, the temperature increases.
C. As molecules slow down, the temperature starts to increase.
D. When all molecular motion stops, the temperature starts to
decrease
HELP ME PLZ AND THANKS I WILL MARK YOU AS BRAINLIEST!!!
Answer:
Final pressure = 6 atm
Final volume = 1.1 L
Final temperature = 100 K
Explanation:
We are given;
Initial Pressure; P1 = 2 atm
Initial volume; V1 = 3.3 L
Initial temperature; T1 = 27° C + 273 = 300 K
Final pressure; P2 = 6 atm
We will use Boyles law to get the final volume.
P1V1 = P2V2
V2 = (P1 × V1)/P2
P2 = (2 × 3.3)/6
V2 = 1.1 L
We can use Charles law to find the final temperature.
V1/T1 = V2/T2
T2 = (V2 × T1)/V1
T2 = (1.1 × 300)/3.3
T2 = 100 K
For each system listed in the first column of the table below, decide (if possible) whether the change described in the second column will increase in GPS of the system, decrease S, or leave S unchanged. If you don’t have enough information to decide, check the “not enough information“ button in the last column. Note for advanced students: you may assume ideal gas and ideal solution behavior.
Answer:
For each system listed in first column of the table below, decide (if possible) whether the change described in the second column will increase the entropy S of the system, decrease S , or leave S unchanged. If you don?t have enough information to decide, check the not enough information button in the last column
What is its density in kilograms per cubic meter?
Copper has a density of 8950 kg/m3 = 8.95 kg/dm3 = 8.95 g/cm3. Water has a density of 1000 kg/m3 = 1000 g/L = 1 kg/dm3 = 1 kg/L = 1 g/cm3 = 1 g/mL.
HOPE IT HELPS❤️
la. A man was traveling by sie is allowed a maximum of 20kg luggage. The man
weighing 3.5kg, 15kg.2kg and 15kg
Find the excess weight of his luggage.
Express the excess weight as a percentage of the maximum weight allowed
Answer: The excess weight of the luggage is 15.5 kg and its percentage is 77.5%
Explanation:
Given values:
Maximum amount of luggage allowed = 20 kg
Amount of luggage man is carrying = [3.5 + 15 + 2 + 15] kg = 35.5 kg
Excessive weight of the luggage carried = Amount of luggage carrying - Maximum amount of luggage allowed
Excessive weight of the luggage carried = [35.5 - 20] = 15.5 kg
To calculate the percentage of excess weight, we use the equation:
[tex]\% \text{excess weight}=\frac{\text{Excess weight carried}}{\text{Maximum allowed}}\times 100[/tex]
Putting values in above equation, we get:
[tex]\% \text{excess weight}=\frac{15.5kg}{20kg}\times 100\\\\\% \text{excess weight}=77.5%[/tex]
Hence, the excess weight of the luggage is 15.5 kg and its percentage is 77.5%
Which of the following mixtures is best separated by the use of a separating funnel?
methane and water
ethyl ethanoate and water
ethanol and water
ethanoic acid and water
Answer:
ethyl ethanoate and water
Explanation:
At the point when one fluid doesn't blend in with another yet glides on top of it, an isolating pipe can be utilized to isolate the two fluids. Oil glides on water. This combination can be isolated utilizing an isolating channel as demonstrated on the following page.
Ethyl liquor and water are two miscible fluids. Refining is a cycle that can be utilized to isolate an unadulterated fluid from a combination of fluids. An isolating channel can be utilized to isolate the parts of the combination of immiscible fluids.
The answer is ethyl ethanoate and water. Hope this helps you!
What is the molar solubility of MgF2 in a 0.36 M Mg(NO3)2 solution? For MgF2, Ksp = 8.4 × 10^–8
Answer:
2.4 × 10⁻⁴ M
Explanation:
Step 1: Calculate the concentration of Mg²⁺ coming from Mg(NO₃)₂
Mg(NO₃)₂ is a strong electrolyte and the molar ratio of Mg(NO₃)₂ to Mg²⁺ is 1:1. The initial molar concentration of Mg²⁺ is 1/1 × 0.36 M = 0.36 M.
Step 2: Make an ICE chart for the solution of MgF₂
MgF₂(s) ⇄ Mg²⁺(aq) + 2 F⁻(aq)
I 0.36 0
C +S +2S
E 0.36+S 2S
The solubility product constant is:
Ksp = [Mg²⁺] × [F⁻]² = (0.36+S) × (2S)²
Since S <<< 0.36, 0.36+S ≈ 0.36.
Ksp = 0.36 × 4S² = 8.4 × 10⁻⁸
S = 2.4 × 10⁻⁴ M
What is the price coke difference between a strong and weak acid?
Explanation:
Strong acids are those that are completely ionized in body fluids, and weak acids are those that are incompletely ionized in body fluids. Hydrochloric acid (HCl) is considered a strong acid because it is present only in a completely ionized form in the body, whereas carbonic acid (H2 CO3) is a weak acid because it is ionized incompletely, and, at equilibrium, all three reactants are present in body fluids. See the reactions below.
H2 CO3 (acid)↔H+ + HCO3- (base)
MAY IT HELPS U MATE ☃️☃️
What is the role of a decomposer in a food chain?
A. to move food from producers to consumers
B. to move food from consumers to other consumers
C. to make food for the ecosystem
D. to return matter to the environment
Answer:D
Explanation:
Decomposers decompose food and return it to the environment through the soil
When HCl(g) reacts with NH3(g) to form NH4Cl(s), 42.1 kcal of energy are evolved for each mole of HCl(g) that reacts. Write a balanced equation for the reaction with an energy term in kcal as part of the equation.
Answer: The chemical equation is [tex]HCl(g)+NH_3(g)\rightarrow NH_4Cl(s)+42.1kCal[/tex]
Explanation:
There are 2 types of reactions that are classified based on enthalpy change:
Endothermic reactionExothermic reactionEndothermic reactions: They are defined as the reactions where heat is absorbed by the reaction. The change in enthalpy of the reaction is always positive.
Exothermic reactions: They are defined as the reactions where heat is released by the reaction. The change in enthalpy of the reaction is always negative.
Given values:
Energy released for 1 mole of HCl reacted = -42.1 kCal
The chemical equation for the formation of ammonium chloride follows:
[tex]HCl(g)+NH_3(g)\rightarrow NH_4Cl(s)+42.1kCal[/tex]
Look at this picture.
Which process in the water cycle is shown in the picture?
evaporation
transpiration
condensation
precipitation
Answer:
condensation
Explanation:
the water has condensed from the gaseous form into rain drops
Answer:
precipitation
Explanation:
A community has a nearby forest that has some insect-damaged trees that are dying. They decide to cut the dying trees and sell the wood for
firewood.
How does science knowledge support this solution?
A. Cutting down the trees allows more animals to live in the forest.
B. Using the trees for firewood eliminates pollution caused by heating homes.
C. Selling the diseased trees as firewood allows the community to make money.
D. Removing the diseased trees allows the remaining trees to get more water and sunlight.
A can contains 375mL of soda. Using the appropriate number of significant figures, how much soda is left in the can after 308mL is poured into a glass
Answer:
[tex]V_l=67mL[/tex]
Explanation:
From the question we are told that:
Initial Volume [tex]V_1=375mL[/tex]
Final Volume [tex]V_2=308mL[/tex]
Generally the equation for Left-Over is mathematically given by
[tex]V_l=V_1-V_2[/tex]
[tex]V_l=375-308[/tex]
[tex]V_l=67mL[/tex]
