Three 15-Ω and two 25-Ω light bulbs and a 24 V battery are connected in a series circuit. What is the current that passes through each bulb?
1) 0.18 A
2) 0.25 A
3) 0.51 A
4) 0.74 A
5) The current will be 1.6 A in the 15-Ω bulbs and 0.96 A in the 25-Ω bulbs.

Answer:

4.73 × 10^5

Explanation:

Answer:

R = 0.0015Ω

Explanation:

The formula for calculating the resistivity of a material is expressed as;

ρ = RA/l

R is the resistance

ρ is the resistivity

A is the area of the wire

l is the length of the wire

Given

l = 85cm = 0.85m

A = πr²

A = 3.14*0.0018²

A = 0.0000101736m²

ρ = 1.75 × 10-8Ωm.

Substitute into the formula

1.75 × 10-8 = 0.0000101736R/0.85

1.4875× 10-8 = 0.0000101736R

R = 1.4875× 10-8/0.0000101736

R = 0.0015Ω

Answer:

EMF = 51.01 Volt

Explanation:

A 50-turn coil has a diameter of 15 cm. The coil is placed in a spatially uniform magnetic field of magnitude 0.500~\text{T}0.500 T so that the plane of the coil makes an angle of 30^\circ30 ​∘ ​​ with the magnetic field. Find the magnitude of the emf induced in the coil if the magnetic field is reduced to zero uniformly in 0.100~\text{s}0.100 s

We have,

Number of turn in the coil, N = 50

The diameter of the coil, d = 15 cm

Radius, r = 7.5 cm = 0.075 m

Initial magnetic field, [tex]B_i=0.5\ T[/tex]

The plane of the coil makes an angle of 30° with the magnetic field.

The magnetic field reduced to zero in 0.1 seconds

We need to find the emf induced in the coil. We know that, emf is equal to the rate of change of magnetic flux. So,

[tex]\epsilon=\dfrac{BNA\cos\theta}{t}\\\\\epsilon=\dfrac{0.5\times 50\times \pi \times 0.075\cos(30)}{0.1}\\\\\epsilon=51.01\ V[/tex]

So, the induced emf in the coil is 51.01 V.

Answer:

chk picture for eqn

Explanation:

Answer:

t = 3.48 s

Explanation:

The time for the maximum height can be calculated by taking the derivative of height function with respect to time and making it equal to zero:

[tex]h(t) = -16t^2+v_ot+h_o\\\\\frac{dh(t)}{dt}=0=-32t+v_o\\\\v_o = 32t[/tex]

where,

v₀ = initial speed = 110 ft/s

Therefore,

[tex]110 = 32t\\\\t = \frac{110}{32}\\\\[/tex]

t = 3.48 s

1. Based on Scenario A, multiple frames will minimize re-transmission overhead and should be preferred in the encapsulation of packets.

2. Based on Scenario B, the encapsulation of packets should be in a single frame because of the high level of network reliability and accuracy.

Justification:

There will not be further need to re-transmit the packets in a highly reliable and accurate network environment, unlike in an environment that is very prone to errors.  The reliable and accurate network environment makes a single frame economically better.

Encapsulation involves the process of wrapping code and data together within a class so that data is protected and access to code is restricted.

With encapsulation, each layer:

Thus, in a reliable and accurate network environment, single frames should be used to enhance transmission and minimize re-transmission overhead.  This is unlike in an environment that is very prone to errors, where multiple frames should rather be used to minimize re-transmission overhead.

Learn more about encapsulation of packets here: https://brainly.com/question/22471914

We have that the power of the compressor is

[tex]H_p=24.242hp[/tex]

From the question we are told that:

Flow rate [tex]W=1kg/s[/tex]

inlet Pressure [tex]P_1=1 bar[/tex]

inlet Temperature [tex]T_1= 288k[/tex]

Outlet Temperature [tex]T_2= 370k[/tex]

Outlet Pressure [tex]P_2=200 kN/m^2=2bars[/tex]

[tex]Cp = 1.103 kJ[/tex]

[tex]R = 287 kJ (kg.k)​[/tex]

Generally, the equation for Adiabatic head  is mathematically given by

[tex]H=\frac{ZRT_1}{Cp-1/K}[\frac{P_2}{P_1}^{(Cp-1)/Cp}-1][/tex]

Where

[tex]Z=Compressibility\ factor[/tex]

[tex]Z=0.99[/tex]

Therefore

[tex]H=\frac{(0.99)(287)(288)}{(1.103)-1/(1.103)}[\frac{(200)}{(1)}^{((1.103)-1)/(1.103)}-1][/tex]

[tex]H=560925.5958 J/kg[/tex]

[tex]H=5.6*10^5J/kg[/tex]

Generally, the equation for centrifugal compressor power  is mathematically given by

[tex]H_p=\frac{WH}{E*33000}[/tex]

Where

E is efficiency (adiabatic)

[tex]E=70\%=0.7[/tex]

Therefore

[tex]H_p=\frac{(1)(5.6*10^5)}{0.7*33000}[/tex]

[tex]H_p=24.242hp[/tex]

In conclusion

The power of the compressor is

[tex]H_p=24.242hp[/tex]

For more information on this visit

https://brainly.com/question/13389697

Answer:

Explanation:

In the first moments after the Big Bang, the universe was extremely hot and dense. As the universe cooled, conditions became just right to give rise to the building blocks of matter – the quarks and electrons of which we are all made. A few millionths of a second later, quarks aggregated to produce protons and neutrons. Within minutes, these protons and neutrons combined into nuclei. As the universe continued to expand and cool, things began to happen more slowly. It took 380,000 years for electrons to be trapped in orbits around nuclei, forming the first atoms. These were mainly helium and hydrogen, which are still by far the most abundant elements in the universe. Present observations suggest that the first stars formed from clouds of gas around 150–200 million years after the Big Bang. Heavier atoms such as carbon, oxygen and iron, have since been continuously produced in the hearts of stars and catapulted throughout the universe in spectacular stellar explosions called supernovae.

But stars and galaxies do not tell the whole story. Astronomical and physical calculations suggest that the visible universe is only a tiny amount (4%) of what the universe is actually made of. A very large fraction of the universe, in fact 26%, is made of an unknown type of matter called "dark matter". Unlike stars and galaxies, dark matter does not emit any light or electromagnetic radiation of any kind, so that we can detect it only through its gravitational effects.  

An even more mysterious form of energy called “dark energy” accounts for about 70% of the mass-energy content of the universe. Even less is known about it than dark matter. This idea stems from the observation that all galaxies seems to be receding from each other at an accelerating pace, implying that some invisible extra energy is at work.

Protons and neutrons formed from quarks in the early universe, a process driven by extremely high temperatures and energies.

In the early cosmos, quarks generated protons and neutrons, which form atomic nuclei, according to the Big Bang hypothesis. Quarks and gluons, which bond quarks, existed freely in a quark-gluon plasma state in the early cosmos due to extreme heat and energy.

Hadronization formed protons and neutrons from quarks as the cosmos cooled and expanded. Eventually, protons and neutrons formed atomic nuclei as the cosmos evolved. This key stage in the early universe's existence formed the basic particles that make up matter today.

Learn more about big bang theory, here:

https://brainly.com/question/17209127

#SPJ3

Explanation:

a) D_t = 500m*10laps

D_t = 5000m or 5km

b)

I) v = d/t

v = 500m/50s

v = 10m/s

ii) 10m/s = 5000m/t

t = 5000m/10m/s

t = (500s)*(1min/60s)

t = 8'20" or 8 mins and 20 sec

c) v_f = v_0 + a*t

v_f-v_0 = a*t

a = (v_f-v_0)/t

a = (12m/s-8m/s)/2s

a = (4m/s)/2s

a = 2m/s²

Part(a),

The distance travelled by the cyclist is 5 km.

Part(b),

(i) The average speed is 10 m/s

(ii) The time taken to cover 10 laps is 8 minutes and 20 seconds.

Part(c),

The acceleration is 2 m/s²

Speed is defined as the ratio of the time distance travelled by the body to the time taken by the body to cover the distance. Speed is the ratio of the distance travelled by time. The unit of speed in miles per hour.

a) The distance will be calculated as

D = 500m*10laps

D = 5000m or 5km

b) The average speed is calculated as,

I) v = d/t

v = 500m/the 50s

v = 10m/s

The time will be calculated as,

ii) 10m/s = 5000m/t

t = 5000m/10m/s

t = (500s)*(1min/60s)

t = 8'20" or 8 mins and 20 sec

The acceleration is calculated as,

c) vf = v0 + at

vf-v0 = at

a = (vf-v0)/t

a = (12m/s-8m/s)/2s

a = (4m/s)/2s

a = 2m/s²

To know more about speed and acceleration follow

https://brainly.com/question/14344386

#SPJ2

Answer:

[tex]y=\frac{1}{2}x-2[/tex]

Explanation:

Slope-intercept form means we want the y to be by itself in the equation. Every thing we do will be about getting the y alone on the left side of the equation

To start we should move x to the left hand side. We can do this by subtracting x from both sides. That way, there is an x on the right, but not the left.

x-x-2y=4-x

this gives us

-2y=4-x

Great! So now what? Well, the y isn't by itself yet because it still is being multiplied by negative two (-2). In order to move it from the left side to the right side, we have to do the opposite of multiply; divide. So, we will divide both sides by -2

[tex]\frac{-2y}{-2} =\frac{4}{-2} -\frac{x}{-2}[/tex]

-2 divided by -2 is 1, 4 divided by -2 is -2, and -x divided by -2 is [tex]\frac{1}{2}x[/tex]

This gives us the answer:  [tex]y=\frac{1}{2}x-2[/tex]

Tips:

A negative divided by a negative is a positive ex: -4 divided by -2 is positive 2

If you are subtracting by a negative number, you are actually adding by a positive ex: 2-(-2) is actually 2+2

Don't be afraid to have fractions in your equations

Whatever you do to the one side of the equation, you must do it to the other side as well. Multiply the left side by 2? You HAVE TO multiply the right side by two as well. Add 3 to the right side? You HAVE TO add 3 to the left.

For problems like this (and when you have access to the internet), where you need to rewrite an equation, double check your work on desmos, which is an online graphing calculator. Input both the original equation and the equation you rewrote, and if they don't create the same line, you did something wrong.

Following the definition of the center of mass, "In physics, the center of mass of a distribution of mass in space is the unique point where the weighted relative position of the distributed mass sums to zero."

(see explanation below)

Answer:

the answer is push example: she thrust her hand into her pocket

Answer:

If a neutral atom gains electrons, then it will become negatively charged. If a neutral atom loses electrons, then it become positively charged.

Answer:

Therefore, the value of x is 41

Explanation:

x=5+36

x=41

Answer:

hi

Explanation:

your answer is

The energy in the wave is proportional to the product of the electric and magnetic fields.

Answer:

Resistance is 1.75 ohms

Explanation:

Magnetic flux:

[tex]{ \phi{ = NBA}}[/tex]

N is number of turns, N = 8

B is magnetic flux

A is area of projection.

From faradays law:

[tex]E = - \frac{ \triangle \phi}{t} [/tex]

where E is the Electro motive force.

But E = IR

where I is current and R is resistance:

[tex]IR = \frac{( \phi_{1} - \phi _{2}) }{t} \\ \\ 140 \times R = \frac{8 \times (8 - 5)}{0.098} \\ \\ R = \frac{24}{0.098 \times 140} \\ \\ resistance = 1.75 \: ohms[/tex]

Answer:

Distance is a scalar quantity that refers to "how much ground an object has covered" during its motion. Displacement is a vector quantity that refers to "how far out of place an object is"; it is the object's overall change in position.

Explanation:

Answer:

Explanation:

Time is not part of the Work equation. That's the only conclusion that you can come to.

Work = Force * distance.

Not enough information is given to go any further. You don't have enough information to calculate the distance.

We don't know if the box can be moved or not. It says heavy. 50 N is really not very much.

I would guess that you are intended to answer that the box didn't move, but it's really hard to tell.

Answer:

[tex]\boxed {\boxed {\sf 100 \ J}}[/tex]

Explanation:

We are asked to calculate the work done to move a box.

Work is the product of force and distance or displacement.

[tex]W= F*d[/tex]

A 10 Newton force is applied horizontally on the box. Since the surface is frictionless, there is no force of friction, and the net force is 10 Newtons. The force moves the box 10 meters.

Substitute the values into the formula.

[tex]W= 10 \ N * 10 \ m[/tex]

Multiply.

[tex]W= 100 \ N*m[/tex]

Let's convert the units. 1 Newton meter is equal to 1 Joule, therefore our answer of 100 Newton meters is equal to 100 Joules.

[tex]W= 100 \ J[/tex]

100 Joules of work was done to move the box.

Answer:

Because SI system has fundamental units of MKS System

Answer:

Explanation: the unit of length ,mass , and time are same in both the system , thus, the SI system is the extended from of MKS system.

Answer:

the answer should be b) 3.8 x 10-5 v

Answer:

The additional load is 20g

Answer:

In a column of fluid, pressure increases with depth as a result of the weight of the overlying fluid. Thus a column of fluid, or an object submerged in the fluid, experiences greater pressure at the bottom of the column than at the top. This difference in pressure results in a net force that tends to accelerate an object upwards.

The pressure at a depth in a fluid of constant density is equal to the pressure of the atmosphere plus the pressure due to the weight of the fluid, or p = p 0 + ρ h g , p = p 0 + ρ h g , 14.4

Granite: 2.70 × 10 32.70 × 10 3

Lead: 1.13 × 10 41.13 × 10 4

Iron: 7.86 × 10 37.86 × 10 3

Oak: 7.10 × 10 27.10 × 10 2

Explanation:

CFL bulbs were made to take the place of incandescent bulbs, which generate light as a result of heat. ... LED (light-emitting diode) is a type of bulb that produces light using a narrow band of wavelengths. LED lighting is more energy efficient than CFL bulb.

Answer:

400m

Explanation:

Answer:

  E_ {total} = [tex]\frac{Q }{L^2 \epsilon_o}[/tex]

Explanation:

In this exercise you are asked to calculate the electric field between two plates, the electric field is a vector

         E_ {total} = E₁ + E₂

         E_ {total} = 2 E

where E₁ and E₂ are the fields of each plate, we have used that for the positively charged plate the field is outgoing and for the negatively charged plate the field is incoming, therefore in the space between the plates for a test charge the two fields point in the same direction

to calculate the field created by a plate let's use Gauss's law

          Ф = ∫ E . dA = q_{int} /ε₀

As a Gaussian surface we use a cylinder with the base parallel to the plate, therefore the direction of the electric field and the normal to the surface are parallel, therefore the scalar product is reduced to the algebraic product.

           E 2A = q_{int} / ε₀

where the 2 is due to the surface has two faces

indicate that the surface has a uniform charge for which we can define a surface density

           σ = q_{int} / A

           q_{int} = σ A

we substitute

           E 2A = σ A /ε₀

           E = σ / 2ε₀  

therefore the total field is

           E_ {total} = σ /ε₀

let's substitute the density for the charge of the whole plate

           σ= Q / L²

            E_ {total} = [tex]\frac{Q }{L^2 \epsilon_o}[/tex]

Answer:

c

Explanation:

Liquid plastic is frozen in a physical change that increases its volume,it can be known about the plastic that Its mass will remain the same, therefore the correct answer is option C.

Anything which has mass and occupies space is known as matter ,mainly there are four states of matter solid liquid gases, and plasma.

These different states of matter have different characteristics according to which they vary their volume and shape.

It is known about plastic that its mass will remain the same when liquid plastic is frozen, by increasing its volume.

Liquid plastic is frozen in a physical change that increases its volume,it can be known about the plastic that Its mass will remain the same,  therefore the correct answer is C.

To earn more about the matter here,refer to the link;

brainly.com/question/9402776

#SPJ2

Answer:

okk

now what do I do with it