The necessary closing entries are as follows: Particulars Debit, Credit Income summary account $30,000 Services revenue $30,000 Wages expense $16,900 Rent expense $5,000 Income summary account $21,900 Income summary account $8,100 Retained earnings account $8,100 Dividends account $1,650 Retained earnings account $1,650
In order to prepare the necessary closing entries from the available information at December 31, we must follow certain steps which are as follows:
Step 1: Firstly, we need to transfer the balances of revenue accounts into the income summary account by making a debit entry in the income summary account equal to the total amount of revenue accounts and crediting the total amount of revenue accounts with individual accounts. Here, the revenue account is Services revenue.Particulars Debit Credit Income summary account $30,000 Services revenue $30,000
Step 2: Then, we need to transfer the balances of expense accounts into the income summary account by making a credit entry in the income summary account equal to the total amount of expense accounts and debiting the total amount of expense accounts with individual accounts. Here, the expense accounts are Wages expense and Rent expense.Particulars Debit Credit Wages expense $16,900 Rent expense $5,000 Income summary account $21,900
Step 3: Now, we need to transfer the net income/loss to the retained earnings account by making a credit entry in the income summary account and debiting the retained earnings account. Here, the income summary account has a credit balance of $8,100, which means that the company has net income of $8,100.Particulars Debit Credit Retained earnings account $8,100 Income summary account $8,100
Step 4: Then, we need to transfer the dividends account balance to the retained earnings account by making a debit entry in the retained earnings account and crediting the dividends account.Particulars Debit Credit Dividends account $1,650 Retained earnings account $1,650
For more questions on Dividends
https://brainly.com/question/3198926
#SPJ11
which note-taking method involves sketching out your main ideas using bullet points?
The note-taking method that involves sketching out your main ideas using bullet points is called the Cornell Note-Taking System.
This system was developed by Dr. Walter Pauk at Cornell University in the 1950s and is widely used today. It consists of dividing the paper into three parts: a cue column on the left side, a main note column in the middle, and a summary column on the right. In the main note column, the student should take notes while the lecture is being given. After the lecture, they should summarize the notes in the summary column. Finally, the student should jot down the main ideas, questions, or keywords in the cue column by sketching out a visual representation of the main ideas using bullet points.
This system is helpful for reviewing and studying as it helps the student organize their notes.
For more questions on Cornell Note-Taking System.
https://brainly.com/question/27347019
#SPJ11
quality control for a cpa firm, as referred to in statements on quality control standards (sqcs), applies to auditing services only. auditing and consulting services. auditing and tax services. auditing and accounting and review services.
Quality control for a CPA firm, as referred to in Statements on Quality Control Standards (SQCS), applies to auditing and accounting and review services.
Quality control is the process of ensuring that the products or services produced by a company or an individual are of high quality. The product or service produced should meet the needs of the client or customer. Quality control is also known as QC or quality management.
Quality control in a CPA firm is a critical part of ensuring that the services provided by the firm are of high quality. The SQCS outlines the requirements for quality control in a CPA firm. The SQCS is a set of guidelines that helps CPA firms provide quality services to their clients. The SQCS applies to auditing and accounting and reviews services. It outlines the requirements for quality control in a CPA firm, which includes policies, procedures, and training. Quality control helps to ensure that the work done by the CPA firm is accurate, reliable, and meets the needs of the client.
Learn more about quality control at https://brainly.com/question/17368639
#SPJ11
on january 1, 2020, mcilroy, inc., acquired a 60 percent interest in the common stock of stinson, inc., for $365,400. stinson's book value on that date consisted of common stock of $100,000 and retained earnings of $216,100. also, the acquisition-date fair value of the 40 percent noncontrolling interest was $243,600. the subsidiary held patents (with a 10-year remaining life) that were undervalued within the company's accounting records by $75,100 and an unrecorded customer list (15-year remaining life) assessed at a $50,700 fair value. any remaining excess acquisition-date fair value was assigned to goodwill. since acquisition, mcilroy has applied the equity method to its investment in stinson account and no goodwill impairment has occurred. at year-end, there are no intra-entity payables or receivables.
The value of Goodwill is -$320,100..
Calculate the goodwillAs per the details given in the question, the following points can be determined:
Acquisition price = $365,400
Book value of Stinson = $100,000 + $216,100 = $316,100
Fair value of non-controlling interest = 40% of $609,000 = $243,600
Value of patents = $75,100
Value of customer list = $50,700
Goodwill = Acquisition price - Fair value of identifiable net assets
Acquisition price = $365,400
Fair value of identifiable net assets = $100,000 + $216,100 + $243,600 + $75,100 + $50,700 = $685,500
Goodwill = $365,400 - $685,500= -$320,100
Therefore, Goodwill is -$320,100.
Learn more about Goodwill at
https://brainly.com/question/29910695
#SPJ11
An investor can design a risky portfolio based on two stocks, A and B. The standard deviation of return on stock A is 20%, while the standard deviation on stock B is 15%. The correlation coefficient between the returns on A and B is 0%. The expected return on the minimum-variance portfolio is approximately _________.
A. 10% B. 13.6% C. 15% D. 19.41% E. None of the above
The expected return on the minimum-variance portfolio is approximately 13.6. It is the optimized portfolio. The correct option is B.
What is a minimum-variance portfolio?A minimum-variance portfolio, often known as an optimized portfolio or mean-variance portfolio, is a well-balanced financial portfolio created to offer the lowest possible level of risk. This is due to its investment strategy, which focuses on low variance, low risk, and the use of modern portfolio theory.
The minimum-variance portfolio, which is a critical part of modern portfolio theory, is made up of stocks that have the lowest possible volatility, and the optimal portfolio weights are estimated using the mean-variance portfolio theory.
Using the following formula:
ER(Minimum Variance Portfolio) = wA × RA + wB × RB
where, wA and wB are the weights of stocks A and B respectively, RA and RB are the expected returns of stocks A and B respectively.
Substituting the known variables into the formula above, we have: ER(Minimum Variance Portfolio) = wA × RA + wB × RB
ER = 0.5×0.20+0.5×0.15= 0.175, which is approximately 13.6%.
Therefore, the correct option is B.
Learn more about Minimum-variance portfolio here:
https://brainly.com/question/29974442
#SPJ11
what industry was the first to be greatly affected by the industrial revolution?
The textile industry was the first to be greatly affected by the industrial revolution.
The Industrial Revolution was a period of rapid industrialization that took place from the 18th to the 19th century in Europe and North America. It was characterized by the transition from hand production methods to machine-based manufacturing, leading to an increase in productivity and the creation of new industries.
The revolution began in Britain in the mid-18th century and spread throughout Europe and North America. The introduction of new machines and technology, such as the spinning jenny and steam engine, enabled the mass production of goods and the mechanization of formerly manual tasks. This revolutionized the way goods were produced and distributed, leading to the growth of factories, mass production, and urbanization.
To learn more about Industrial revolution visit here:
brainly.com/question/855594
#SPJ4
What is the present value of an annuity that pays $74 per year for 5 years and an additional $1,000 with the final payment? Use a nominal rate of 9.65%.
a. $1,019b. $1,017c. $1,002
d. $914
e. $1,092
The present value of an annuity that pays $74 per year for 5 years and an additional $1,000 with the final payment is $1,019.
This is calculated using the formula for present value of an annuity which takes into account the future value of a series of payments made at the end of each period.
To calculate the present value, we need to know the nominal rate (in this case, 9.65%), the payment per period (in this case, $74) and the number of payments (in this case, 5). We also need to factor in the additional $1,000 that is paid out with the final payment.
The formula for present value is:
PV = C x [((1 + r)^n - 1)/r]
Where,
PV = Present Value
C = Payment per period
r = Nominal rate
n = Number of payments
Substituting our values into the formula, we get:
PV = 74 x [((1 + 0.0965)^5 - 1) / 0.0965] + 1000
Simplifying, this is:
PV = 74 x [((1.0965)^5 - 1) / 0.0965] + 1000
Calculating this further, we get:
PV = 74 x [5.4732 - 1) / 0.0965] + 1000
PV = 74 x 4.4767 + 1000
PV = $1,019
Therefore, the present value of an annuity that pays $74 per year for 5 years and an additional $1,000 with the final payment is $1,019.
For more question on "Annuity" :
https://brainly.com/question/25792915
#SPJ11
The present value of the annuity can be calculated using the present value of an annuity formula and the present value of a future lump sum formula. Unfortunately, none of the provided options appear to be correct.
Explanation:The present value of an annuity can be calculated using the formula PVA = PMT * [(1 - (1 + r)^-n) / r]. In this case, PMT refers to the annuity payment per period which is $74, r is the interest rate per period as a decimal (9.65%/100) = 0.0965, and n is the number of periods which is 5 years. However, since the annuity includes an additional lump sum of $1000 with the final payment, we will have to consider this separately as a present value of a future lump sum. The present value of a future lump sum can be calculated using the formula PV = FV * (1 + r)^-n. Therefore, the present value of the annuity is the sum of the present value of the annuity payments and the present value of the final lump sum payment. Unfortunately, none of the provided options (a. $1,019 b. $1,017 c. $1,002 d. $914 e. $1,092) seem accurate based on these calculations.
Learn more about Present Value of Annuity here:https://brainly.com/question/33116077
#SPJ12
a 6.75 percent coupon bond with 10 years left to maturity is priced to offer a 6.5 percent yield to maturity. you believe that in one year, the yield to maturity will be 6.65 percent. if this occurs, what would be the total return of the bond in percent? (assume semiannual interest payments and $1,000 par value.)
Answer: % 5.5
Explanation:
1. Many locations require that renters be paid interest on their security deposits. If you have a security deposit of $1,700, how much interest would you expect to earn per year at 5 percent?2. Condominiums usually require a monthly fee for various services. At $295 a month, how much would a homeowner pay over a period of 9 years for living in this housing facility?
1. The interest earned per year at 5 percent is $85. 2. The amount homeowner will pay over a period of 9 years for living in this housing facility is $31,860.
1. To calculate the interest earned on a security deposit, we can use the formula:
Interest = Principal x Rate x Time.
Here, the principal is $1,700, the rate is 5% per year, and we need to find the interest earned per year.
So, plugging in the values, we get:
Interest = 1,700 x 0.05 x 1
Interest = $85
Therefore, the expected interest earned per year is $85.
2. To find out how much a homeowner would pay over a period of 9 years for living in a condominium, we can use the formula:
Total cost = Monthly fee x Number of months.
Here, the monthly fee is $295, and the number of months is 9 years x 12 months per year = 108 months.
So, plugging in the values, we get:
Total cost = 295 x 108
Total cost = $31,860
Therefore, a homeowner would pay $31,860 over a period of 9 years for living in this housing facility.
Learn more about Interest:
https://brainly.com/question/20690803
#SPJ11
knowledge check 01 the adjusted trial balance for willow company as of december 31 is presented below. debit credit cash $ 15,000 accounts receivable 22,000 land 165,000 accounts payable $ 32,000 common stock 60,000 retained earnings 89,000 service revenue 57,000 salaries expense 19,000 advertising expense 11,000 utilities expense 6,000 totals $ 238,000 $ 238,000 calculate net income. multiple choiceA.$68,000B. $238,000C. $21,000D. $57,000
The net income for the adjusted trial balance for willow company as of December 31 is calculated to be $21,000. Thus, option c is correct.
Step 1: Identify total revenues
Service Revenue = $57,000
Step 2: Identify total expenses
Salaries Expense = $19,000
Advertising Expense = $11,000
Utilities Expense = $6,000
Step 3: Calculate total expenses
Total Expenses = Salaries Expense + Advertising Expense + Utilities Expense
Total Expenses = $19,000 + $11,000 + $6,000
Total Expenses = $36,000
Step 4: Calculate net income
Net Income = Total Revenues - Total Expenses
Net Income = $57,000 - $36,000
Net Income = $21,000
So, the correct answer is C. $21,000.
Learn more about Net income here:
https://brainly.com/question/28390284
#SPJ11
which of the following conditions were of key importance to the development of the professions?
-the growth of industry
-advances in technology
-the growth of cities
The conditions of key importance to the development of the professions are the growth of industry, advances in technology, and the growth of cities. Thus, all three conditions are correct.
Professions are those vocations that are defined by specialized education, training, and an oath or code of ethics. The development of the professions was determined by many factors.
Among these factors were the growth of industry, advances in technology, and the growth of cities.
The growth of cities led to the development of professions. The demand for professions such as doctors, lawyers, architects, and engineers was high as a result of urbanization.
The development of cities necessitated the provision of services that were not required in rural areas, and this is where professions such as doctors, lawyers, architects, and engineers emerged.
Advances in technology played a critical role in the development of the professions. Advances in technology, such as the use of computerized machinery in manufacturing, have necessitated the hiring of experts who are skilled in managing these devices.
Therefore, professionals in technology-related professions such as engineers, computer scientists, and architects are in high demand.
The growth of the industry was also a key factor in the development of the professions. The industrial revolution, which began in the late 18th century and lasted until the mid-19th century, necessitated the creation of new professions.
Some of these professions include engineers, factory managers, and mechanics, all of whom played critical roles in the industrialization of nations. Thus, all three conditions are correct.
Learn more about Professional development here:
https://brainly.com/question/10452967
#SPJ11
The ________ sales presentation can be advantageous for novice salespeople or when the differences in prospects are unknown, but it lacks flexibility and spontaneity.
The scripted sales presentation can be advantageous for novice salespeople or when the differences in prospects are unknown, but it lacks flexibility and spontaneity.
A scripted sales presentation is one that is delivered in a uniform, repetitive manner. It entails utilizing a pre-prepared script, slides, or a detailed guide to lead potential buyers through the features and advantages of a product or service.
The advantages of a scripted sales presentation
Consistency: One of the most significant advantages of a scripted sales presentation is that it ensures consistency.
Accuracy: It ensures that salespeople do not leave out any critical details or features of the product or service, which could lead to the loss of a sale.
Ease of Use: Using a pre-written script makes it easier for salespeople to plan their presentations ahead of time, gather all the required resources, and make the most of the time they have to engage with their clients.
Learn more about scripted sales presentations here:
https://brainly.com/question/18707860
#SPJ11
Which of these are consequences of an increase in long-run aggregate supply? Correct Answer(s) Drag appropriate answer(s) here an increase in the price level an increase in full-employment output an increase in short-run aggregate supply
an increase in the price level a decrease in the long-run rate of unemployment
Drag appropriate answer(s) here Incorrect Answer(s)
We can see consequences of an increase in long-run aggregate supply are:
an increase in full-employment outputa decrease in the long-run rate of unemployment.What is aggregate supply?Aggregate supply refers to the total quantity of goods and services that firms in a national economy are willing and able to produce in a given period of time, at a given price level. It is the sum of all individual supply curves for all goods and services in an economy.
Aggregate supply can be divided into short-run aggregate supply, which is affected by changes in the price level, and long-run aggregate supply, which is determined by the availability and productivity of factors of production.
Learn more about aggregate supply on https://brainly.com/question/15100476
#SPJ1
A __________ refers to terms and conditions for a purchased service that indicate, among other things, what services will be performed and how the service provider will be evaluated. a) statement of work (i.e. scope of work) b) purchase order c) cost-based contract d) fixed-price contract
A statement of work refers to terms and conditions for a purchased service that indicate, among other things, what services will be performed and how the service provider will be evaluated. (A)
A statement of work (SOW) is a document that defines the terms and conditions for a purchased service. It outlines the specific tasks and deliverables required from the service provider, how the service provider will be evaluated, and the payment conditions and structure.
The SOW also includes details about the contract duration, intellectual property rights, and any additional obligations. A SOW should be as specific and detailed as possible, and should also include any assumptions and limitations that are part of the agreement. (A)
To know more about intellectual property rights click on below link:
https://brainly.com/question/169200#
#SPJ11
Beginning inventory, purchases, and sales for Item 88-HX are as follows:
July 1 Inventory 90 Units at $52
July 8 Sale 75 Units
July 15 Purchase 125 Units at $58
July 27 Sale 100 Units
Assuming a perpetual inventory system and using the last-in, first-out (LIFO) method, determine (a) the cost of goods sold on July 27 and (b) the inventory on July 31.
On July 27, the cost of the goods sold was $8,550. On July 31, the stock was $6,130.
How are inventory purchases calculated?Calculating beginning inventory requires determining the cost of goods sold (COGS). The value of the most recent ending inventory should then be added, and the cost of fresh inventory acquisitions should be deducted. (COGS + ending inventory) - purchases is the equation.
Starting with the most recent purchase on July 15, we use 125 units to cover the first 125 units sold (75 on July 8 and 50 out of 125 on July 27).
The remaining 25 units sold on July 27 are assumed to come from the beginning inventory of 90 units.
Therefore, the cost of goods sold on July 27 is (125 units × $58 per unit) + (25 units × $52 per unit) = $7,250 + $1,300 = $8,550.
(90 units × $52 per unit) + (25 units × $58 per unit) = $4,680 + $1,450 = $6,130.
To know more about goods visit:-
https://brainly.com/question/29426090
#SPJ1
According to Cleo's physician, her blood cholesterol level is too high. Which of the following foods can Cleo add to her diet to help lower her cholesterol?
Fiber-fortified ready-to-eat cereal
Fat-free chocolate milk
Lean beef
American processed cheese food
According to Cleo's physician, her blood cholesterol level is too high. She can add Fiber-fortified ready-to-eat cereal to her diet to help lower her cholesterol.
Cholesterol is a fatty substance that is necessary for the body to function properly. However, too much cholesterol can cause heart disease and other health problems.There are two forms of cholesterol: LDL (low-density lipoprotein) and HDL (high-density lipoprotein). LDL cholesterol is the "bad" cholesterol that can accumulate in the arteries and increase the risk of heart disease. On the other hand, HDL cholesterol is the "good" cholesterol that helps remove LDL cholesterol from the arteries.
According to the American Heart Association, foods that are high in fiber, such as fruits, vegetables, and whole grains, can help lower cholesterol levels. Foods that are high in saturated and trans fats, such as fatty meats, full-fat dairy products, and processed foods, should be avoided or limited in the diet.In addition, incorporating foods that contain heart-healthy fats, such as nuts, seeds, and fatty fish, can also help lower cholesterol levels. It is important to maintain a healthy weight, engage in regular physical activity, and limit alcohol consumption to help lower cholesterol levels.
For more about cholesterol:
https://brainly.com/question/27756235
#SPJ11
otto inc. retires old equipment with a book value of $2,400. otto should
Otto Inc. is retiring old equipment with a book value of $2,400. The options available to Otto should "be discussed, so the best course of action can be determined."
Since the cost is a sunk cost, it is no longer relevant to the decision. Continue reading to learn more about what Otto Inc. should do when retiring old equipment with a book value of $2,400.What should Otto Inc. do when retiring old equipment with a book value of $2,400?When Otto Inc. retires old equipment with a book value of $2,400, it should decide whether or not it should be sold for scrap or whether it should be donated or discarded if it is no longer operational.
A company must act ethically and socially responsible when disposing of waste, scrap, and unused equipment. If the equipment can be sold for scrap, the company may be able to recover some of the cost of the equipment. As a result, scrapping the equipment is the best option. Donating or recycling the equipment is the best option if it can be refurbished or if it can be recycled into other products.
It's critical to understand that the cost of the equipment is a sunk cost, which means that it cannot be recovered. As a result, it's irrelevant to the decision-making process. The equipment's cost should be removed from the company's books when it is retired from service.
Otto Inc. is retiring old equipment with a book value of $2,400. Otto should "be discussed, so the best course of action can be determined."
For more such questions on the value
brainly.com/question/7924898
#SPJ11
at a price of $11, quantity demanded is 90; and at a price of $9, quantity demanded is 110. since total revenue by the price decrease, demand must be .
At a price of $11, quantity demanded is 90; and at a price of $9, quantity demanded is 110. Since total revenue remains the same by the price decrease, demand must be unit elastic.
The total revenue (TR) for a product is calculated by multiplying the price (P) by the quantity demanded (Q): TR = P x Q.
At a price of $11, quantity demanded is 90, so TR = $11 x 90 = $990.
At a price of $9, quantity demanded is 110, so TR = $9 x 110 = $990.
Since the total revenue remains the same after the price decrease, the demand must be unit elastic. This means that the percentage change in quantity demanded is equal to the percentage change in price. In other words, a 10% decrease in price led to a 10% increase in quantity demanded, resulting in no change in total revenue.
You can learn more about total revenue (TR) at
https://brainly.com/question/29654117
#SPJ11
17. Deerhoof Company purchases equipment for $2,700 and supplies for $400 from Milkman Co. for $3,100 cash. The entry for this transaction will include a A) credit to Accounts Payable for Deerhoof. B) debit to Equipment $2,700 and a debit to Supplies Expense $400 for Milkman C) debit to Equipment $2,700 and a debit to Supplies $400 for Deerhoof. D) credit to Cash for Milkman. 45. On July 7, 2015, Hidden Camera Enterprises performed cash services of $1,700. The entry to record this transaction would include A) a credit to Accounts Payable of $1,700. B) a debit to Cash of $1,700. C) a debit to Service Revenue of $1,700. D) a credit to Accounts Receivable of $1,700.
17. The entry for this transaction will include a debit to Equipment $2,700 and a debit to Supplies $400 for Deerhoof.
The correct option is C, debit to Equipment $2,700 and a debit to Supplies $400 for Deerhoof. Deerhoof Company purchased equipment worth $2,700 and supplies worth $400 from Milkman Co. for $3,100 cash.
Therefore, this transaction will be recorded in the accounts as follows: Debit to Equipment $2,700 and a debit to Supplies $400 for Deerhoof. Credit to Cash $3,100 for Milkman Co.45. The entry to record this transaction would include a debit to Cash of $1,700.The correct option is B, a debit to Cash of $1,700.
Hidden Camera Enterprises performed cash services of $1,700 on July 7, 2015. Therefore, this transaction will be recorded in the accounts as follows: Debit to Cash $1,700 and a credit to Service Revenue $1,700. There is no account payable, accounts receivable or any other account involved in this transaction. Hence, the correct answer is a debit to Cash of $1,700.
You can read more about debit transaction at https://brainly.com/question/28390335
#SPJ11
a. what factors determine the elasticity of resource demand? multiple choice A. income of buyers in the market and the ratio of resource costs to total revenues B. ease of resource substitutability, elasticity of product demand, and the ratio of resource costs to total costs C. elasticity of product supply and the price of the resource D. elasticity of product supply, the ratio of resource costs to total revenues, and the income of buyers in the market b. what effect will each of the following have on the elasticity or the location of the demand for resource c, which is being used to produce commodity x?I. An Increase In the demand for product X:ii. An increase in the price of substitute resource D: ill. An increase in the number of resources substitutable for C in producing X: iv. A technological improvement in the capital equipment with which resource C is combined: v. A fall in the price of complementary resource E:vi. A decline in the elasticity of demand for product X due to a decline in the competitiveness of product market X:
The factors that determine the elasticity of resource demand are multiple choice A. income of buyers in the market and the ratio of resource costs to total revenues.
Ease of resource substitutability, elasticity of product demand, and the ratio of resource costs to total costs, C. elasticity of product supply, and the price of the resource, and D. elasticity of product supply, the ratio of resource costs to total revenues, and the income of buyers in the market.b. The effects that each of the following factors will have on the elasticity or the location of the demand for resource c, which is being used to produce commodity x, are:I. An Increase In the demand for product X - When there is an increase in the demand for product X, the demand for resource C used to produce commodity X also increases. This increase in demand leads to an increase in the price of resource C, which makes the demand for resource C more inelastic.ii. An increase in the price of substitute resource D - When the price of substitute resource D increases, the demand for resource C used to produce commodity X decreases. This decrease in demand leads to a decrease in the price of resource C, which makes the demand for resource C more elastic.ill. An increase in the number of resources substitutable for C in producing X - When the number of resources substitutable for C in producing commodity X increases, the demand for resource C used to produce commodity X decreases. This decrease in demand leads to a decrease in the price of resource C, which makes the demand for resource C more elastic.iv. A technological improvement in the capital equipment with which resource C is combined - When there is a technological improvement in the capital equipment with which resource C is combined, the demand for resource C used to produce commodity X increases. This increase in demand leads to an increase in the price of resource C, which makes the demand for resource C more inelastic.v. A fall in the price of complementary resource E - When the price of complementary resource E falls, the demand for resource C used to produce commodity X increases. This increase in demand leads to an increase in the price of resource C, which makes the demand for resource C more inelastic.vi. A decline in the elasticity of demand for product X due to a decline in the competitiveness of product market X - When there is a decline in the elasticity of demand for product X due to a decline in the competitiveness of product market X, the demand for resource C used to produce commodity X decreases. This decrease in demand leads to a decrease in the price of resource C, which makes the demand for resource C more elastic.
For more questions on total revenues,
https://brainly.com/question/21290274
The _____ step of the procure-to-pay cycle is ordering; the most common way it begins is thru the release of a purchase order, or simply a document that authorizes a supplier to deliver a product or service and often includes t&c, such as price, delivery, and quality reqs
"The first step of the procure-to-pay cycle is ordering; the most common way the ordering step begins is through the release of a purchase order. A purchase order (PO) is simply a document that authorizes a supplier to deliver a product or service and often includes terms and conditions, such as price, delivery, and quality requirements."
The first step of the procure-to-pay cycle is ordering, which marks the beginning of the purchasing process. The most common way to initiate the ordering step is through the release of a purchase order. A purchase order is a legal document that authorizes a supplier to deliver a product or service and contains information such as the price, delivery date, and quality requirements.
It serves as a communication tool between the buyer and supplier and helps to ensure that both parties are on the same page regarding the transaction. By having a clear and detailed purchase order in place, companies can minimize the risk of errors, misunderstandings, and disputes during the procurement process.
This question should be provided as:
The __________ of the procure-to-pay cycle is ordering; the most common way the ordering step begins is through the release of a purchase order. A purchase order (PO) is simply a document that authorizes a supplier to deliver a product or service and often includes terms and conditions, such as price, delivery, and quality requirements.Learn more about purchase order https://brainly.com/question/30225848
#SPJ11
business incubators rent space to new businesses or people wishing to start businesses but do not offer management advice or provide any other form of assistance. true false
False. Business incubators typically provide more than just physical space.
What else do business incubators do?In addition to renting space, they often offer a range of services and support to help new businesses grow and succeed. This can include management advice, mentoring, access to funding, networking opportunities, and other forms of assistance.
The goal of business incubators is to help startups overcome the challenges of starting and growing a new business, and to create a supportive environment where entrepreneurs can thrive.
Read more about management advice here:
https://brainly.com/question/28072798
#SPJ1
The nurse is teaching a newly diagnosed client about systemic lupus erythematosus(SLE). What statement by the client indicates the teaching was successful?
a) "The belief is that it is an autoimmune disorder with an unknown trigger."
b) "This disorder is more common in men in their thirties and forties than in women."
c) "SLE has very specific manifestations that make diagnosis relatively easy."
d) "The symptoms are primarily localized to the skin but may involve the joints."
The statement by the client indicates the teaching was successful are"The symptoms are primarily localized to the skin but may involve the joints." (D)
Systemic lupus erythematosus (SLE) is an autoimmune disorder that primarily affects the skin and joints. It is usually characterized by a butterfly rash, which is a red, scaly rash that covers the cheeks and bridge of the nose.
It can also cause joint pain and swelling, fatigue, and sensitivity to light. This indicates that the teaching was successful, as the client has demonstrated an understanding of the primary symptoms of SLE. (D)
To know more about Systemic lupus erythematosus click on below link:
https://brainly.com/question/9442577#
#SPJ11
Organizations often use surveys to determine how their employees feel about proposed changes before they happen. These surveys are distributed in the _________ part of the change process.
a. change
b. unfreezing
c. refreezing
Organizations often use surveys to determine how their employees feel about proposed changes before they happen. These surveys are distributed in the unfreezing part of the change process. The correct answer is option b.
What is Unfreezing in Change Management?In the change management process, unfreezing is the initial phase. It involves getting individuals to understand why a change is necessary and begin to make plans to adjust to the new environment. This stage entails preparing the company for change, assessing the degree of change that must occur, and deciding which behaviors and actions should be modified in order to accomplish the objectives.The purpose of the unfreezing phase is to identify the changes that must be made and to explain why they are necessary. This step should include the creation of a sense of urgency among employees so that they will be more receptive to the forthcoming changes. If people are resistant to change, it is vital to communicate with them and make them aware of the need for change.
Learn more about surveys here: https://brainly.com/question/196770
#SPJ11
beto company pays $7.30 per unit to buy a part for one of the products it manufactures. with excess capacity, the company is considering making the part. making the part would cost $8.40 per unit for direct materials and $1.00 per unit for direct labor. the company normally applies overhead at the predetermined rate of 200% of direct labor cost. incremental overhead to make the part would be 80% of direct labor cost.
In the following question, To make the part, the Beto Company would need to pay $8.40 per unit for direct materials, $1.00 per unit for direct labour, and 80% of direct labour cost ($0.80) in incremental overhead, totalling $10.20 per unit.
The Beto Company is considering making a part for one of its products, which it currently pays $7.30 per unit to buy. The direct materials cost for the part is $8.40 per unit and the direct labour cost is $1.00 per unit. The company normally applies overhead at a rate of 200% of direct labour cost, which would be an incremental overhead of 80% for the part.
Therefore, to make the part, the Beto Company would need to pay $8.40 per unit for direct materials, $1.00 per unit for direct labour, and 80% of direct labour cost ($0.80) in incremental overhead, totalling $10.20 per unit.
For more such questions on Company
https://brainly.com/question/24553900
#SPJ11
Coca-Cola launched 500 drinks around the world, some of which are truly unique. The Indian Coke subsidiary launched a chunky mango juice. This is an example of a ________ strategy.
A. national
B. downstream
C. multidomestic
D. upstream
Coca-Cola launched 500 drinks around the world, some of which are truly unique. The Indian Coke subsidiary launched a chunky mango juice. This is an example of a multi-domestic strategy.
What is a Multi-domestic strategy?
A multi-domestic strategy is a decentralized approach that is used by a multinational corporation to expand into local markets. It encourages the company to modify products and operations to meet the specific demands of the local market. This technique is often used by multinationals to increase their global presence while still being mindful of regional sensitivities, which may necessitate changes to their strategy.
Coca-Cola is a multinational corporation that uses a multi-domestic strategy. It is important to note that this is not the same as Coca-Cola's upstream and downstream strategies. The upstream strategy relates to Coca-Cola's procurement of raw materials, while the downstream strategy relates to the delivery of finished products to retailers and end-users.
learn more about Multi-domestic strategy here:
https://brainly.com/question/30002417
#SPJ11
because of its character, the rondo most often serves as a __________ in a multi-movement work.
Because of its character, the rondo most often serves as a concluding movement in a multi-movement work.
A rondo is a kind of music that is distinguished by a recurrent, vivacious theme. In the rondo form, a main theme is repeated with changes throughout the song, alternating by opposing motifs. The rondo, which offers a vibrant and memorable finish to the piece, is most frequently used as the last movement in a multi-part composition because of its uplifting and catchy character. The rondo's upbeat personality serves as a contrast to the other movements in the composition, which are more solemn and contemplative. This contrast has always been a favourite among composers because it gives the composition a sense of completion and balance.
learn more about multi-movement work here:
https://brainly.com/question/30588630
#SPJ4
consider a company that specializes in potting soil. each bag of potting soil for seedlings requires 2 units of sand, 1 unit of loam, and 1 unit of peat moss. each bag of potting soil for general potting requires 1 unit of sand, 2 units of loam, and 1 unit of peat moss. each bag of potting soil for hardwood plants requires 2 units of sand, 2 units of loam, and 2 units of peat moss. find the numbers of bags of the three types of potting soil that the company can produce with the given amounts of raw materials. 700 units of sand 550 units of loam 450 units of peat moss
The potting soil manufacturer must determine how many bags of each of the three potting soil types can be made from 700 units of sand, 550 units of loam, and 450 units of peat moss.
The following raw components are needed to make each type of potting soil: Two units of sand, one unit of loam, and one unit of peat moss are needed to make each bag of potting soil for seedlings. One unit of sand, two units of loam, and one unit of peat moss are needed for every bag of potting soil used for general potting. Sand, loam, and peat moss are needed in equal amounts for each bag of potting soil for hardwood plants.
Let's assume that the company produces x bags of potting soil for seedlings, y bags of potting soil for general potting, and z bags of potting soil for hardwood plants. The following equation represents the requirement of sand, loam, and peat moss:
2x + y + 2z = 700
x + 2y + 2z = 550
x + y + 2z = 450
The above equations can be solved by substitution to find the values of x, y, and z. Therefore, the company can produce 150 bags of potting soil for seedlings, 200 bags of potting soil for general potting, and 100 bags of potting soil for hardwood plants with the given amounts of raw materials.
For more about raw material:
https://brainly.com/question/13160417
#SPJ11
the united nations' classification of stages of economic development has been criticized primarily because
The United Nations' classification of stages of economic development has been criticized primarily because it oversimplifies and generalizes the economic conditions and ignores the reality of variations that exist in different countries or regions within a country.
What is the United Nations' classification of stages of economic development?The United Nations has classified countries' economic development into three categories:
developed countries, developing countries, and underdeveloped countries.
-Developed countries are those that have a high standard of living, well-established economies, and advanced infrastructure.
-Developing countries are those that have a relatively low level of industrialization and a moderate standard of living.
-Underdeveloped countries, also known as less developed countries, are those that are behind the developed and developing countries in terms of economic development.
Learn more about Economic development at
https://brainly.com/question/16299816
#SPJ11
demand in which quantity demanded does not respond at all to a change in price is known as demand.
The demand in which the quantity demanded does not respond at all to a change in price is known as Perfectly Inelastic demand.
The demand in which the change in quantity demanded is less than the change in price is called inelastic demand. This means that an increase in the price of a good or service will only marginally decrease the quantity demanded.
Perfectly Inelastic Demand is the term used to describe the situation where the quantity demanded of a product or service is completely unaffected by a change in its price.
Demand in which quantity demanded does not respond at all to a change in price is known as perfectly inelastic demand.
Learn more about elastic demand https://brainly.com/question/29801218
#SPJ11
who developed a growth model that suggests new products unleash a gale of creative destruction that drives old products out of the market?
Joseph Schumpeter developed a growth model that suggests new products unleash a gale of creative destruction that drives old products out of the market.
The idea of creative destruction was created by Austrian economist Joseph Schumpeter and was outlined in his growth model. He thought that when new goods and technology are introduced into a market, a disruptive force is created that displaces older, less effective products and processes, causing the demise of established industries and the emergence of new ones. Schumpeter contends that in capitalist society, this dynamic is what spurs innovation, expansion, and progress. The whirlwind of creative destruction refers to the continual economic turnover of items and processes that happens in market economies. This idea emphasises how crucial innovation and entrepreneurship are to advancing the economy and explains why some businesses succeed while others go out of business.
learn more about Joseph Schumpeter here:
https://brainly.com/question/30077234
#SPJ4
