Answer: d. possessing tiny protrusions known as microvilli. The proximal convoluted tubule's epithelial cells have microvilli on their surface, which increases their surface area and improves.
the efficiency of reabsorption of chemicals from the filtrate back into the circulation. The cells do not release enzymes to promote absorption, and the rugae folds and thin walls are not adaptations for reabsorption. The proximal convoluted tubule's epithelial cells are in charge of reabsorbing vital components from the glomerular filtrate, including glucose, amino acids, and electrolytes. Many microvilli, which are tiny finger-like projections on the surface of the cell that enhance the surface area accessible for reabsorption, are present in the cells, which enable them to perform this role. This modification makes it possible for chemicals to be reabsorbted more effectively as they move through the tubule. The rugae folds and thin walls, on the other hand, have little impact on reabsorption in the proximal convoluted tubule. In this region of the nephron, reabsorption likewise does not include enzyme secretion.
learn more about microvilli here:
https://brainly.com/question/30871186
#SPJ4
choose the elements that are metalloids look for applications of these elements in real life argon antimony boron mercury calcium zinc germanium silicon selenium astatine
Answer:
Boron,silicon,germanium,arsenic,antimony,tellurium, polonium, astatine.
A neutralization reaction produces H2O and LiNO3. Select the acid-base reactants for this neutralization reaction.
Group of answer choices
LiOH
HNO
LiNO
HNO3
HLi
The acid-base reactants for this neutralization reaction are LiOH and HNO3.
Explanation : Acid-base reactants for this neutralization reaction are LiOH and HNO3.The reaction between an acid and a base to form a salt and water is known as a neutralization reaction. It is an exothermic reaction because heat is generated when the acid and base are mixed. The products of the reaction are a salt and water (H2O).The neutralization reaction produces H2O and LiNO3. The neutralization reaction between LiOH and HNO3 forms LiNO3 and H2O as products.What is LiOH?LiOH is an alkali compound that is a base with a pH greater than 7. It is commonly known as lithium hydroxide. It is a highly corrosive substance that is used in a variety of industrial processes. It is used in the manufacture of lithium batteries, as well as in rocket fuel, in the purification of natural gas, and as a carbon dioxide absorbent.What is HNO3?Nitric acid is also known as aqua fortis, and it is a highly corrosive mineral acid. It is a potent oxidizing agent that is highly reactive with metals, creating flammable gases upon reaction. It is primarily used in the manufacture of fertilizers, explosives, and various organic chemicals. Nitric acid is a highly corrosive and toxic substance, and proper care should be taken when working with it.
For more such questions on Acid Base
https://brainly.com/question/23008798
#SPJ11
For the reaction C + 2H2 → CH4, how many grams of carbon are required to produce 7.8 moles of methane, CH4 ?
Round your answer to the nearest tenth. If you answer is a whole number like 4, report the answer as 4.0
Use the following molar masses. If you do not use these masses, the computer will mark your answer incorrect.:
Element Molar Mass
Hydrogen 1
Carbon 12
Answer:
The balanced chemical equation for the reaction is:
C + 2H2 → CH4
From the equation, we can see that 1 mole of carbon reacts with 2 moles of hydrogen to produce 1 mole of methane. Therefore, to produce 7.8 moles of methane, we would need:
1 mole of carbon = 1 mole of CH4 / 2 moles of H2 = 1/2 mole of CH4
7.8 moles of CH4 = 7.8 × (1/2) moles of C = 3.9 moles of C
Now, we can use the molar mass of carbon to convert moles to grams:
Atomic mass of carbon (C) = 12.01 g/mol
3.9 moles of C × 12.01 g/mol = 46.8 g of C
Therefore, we need 46.8 grams of carbon to produce 7.8 moles of methane (CH4). Rounded to the nearest tenth, the answer is 46.8 grams.
The melting point of a substance is the temperature at which the particles have enough ___ energy to break free from the ___ phase and enter the ___ phase.
The melting point of a substance is the temperature at which the particles have enough kinetic energy to break free from the solid phase and enter the liquid phase.
When the melting point is reached, the solid's lattice structure is disrupted and its particles are free to move, increasing the entropy of the system.
At the molecular level, when particles in a solid gain enough energy, they vibrate more intensely and begin to break the bonds between them. This disruption leads to a decrease in entropy, as the particles move around more freely.
When the melting point is reached, this decrease in entropy is overcome by an increase in entropy due to the particles being able to move around more freely in the liquid state. The disruption of the lattice structure also results in a decrease in the intermolecular forces, and thus a decrease in surface tension.
To know more about lattice structure click on below link:
https://brainly.com/question/2497050#
#SPJ11
what was an early outcome of regime change in iraq?
Saddam Hussein's overthrow in 2003 was one of the early results of regime transition in Iraq. Given that Hussein had been in charge of Iraq's government and society for more than 20 years,
this represented a dramatic change in the political landscape of the nation. Regime transition, however, was followed by a turbulent era of political unrest and sectarian warfare. Broader geopolitical repercussions of the US-led invasion of Iraq and subsequent government change included strained ties with other nations in the region, a rise in anti-American sentiment, and the creation of new extremist organizations like ISIS. The long-term implications of the Iraqi government transition are still being discussed and examined, although is clear that the initial outcome was one of significant.
learn more about Iraq here:
https://brainly.com/question/29605758
#SPJ4
many soap recipes call for the addition of 5% excess fat. explain the benefit of using excess fat.
Answer:Superfatting is done for two reasons. The first is that extra oils add more moisturizing qualities to your soap (sometimes referred to as emollients). The second is that the common 5% superfatting allows you to a bit more leeway with your lye.
Explanation:What Are the Benefits of Using Excess Fat to Make Soap?
Written by Mustiin Soap
Handcrafted soaps with a little touch of essential oils and sweet, subtle fragrances can offer you a powerful bathing experience. While aroma enriches your mind, the excess fats, on the other hand, are the ones that enhance the overall impact on your skin. Whether made by a hot or cold process, adding fats is essential.
Adding excess fat or superfatting of soap benefits the soap’s moisturizing ability. Another significant benefit is its compatibility with the skin’s pH. As the soap has a pH of about 9.5, and the skin’s pH varies between 4.5-6. Superfatting is used to make the soap more skin-friendly.
The partial pressure of oxygen in the atmosphere is digits. the partial 0.210 atm. Calculate the partial pressure in mm Hg and torr. Round each of your answers to 3 significant digits____mm Hg ____torr
The partial pressure of oxygen in the atmosphere is 0.210 atm.
Therefore, the partial pressure of oxygen in mm Hg is 0.210 atm x 760 = 158.6 mm Hg and the partial pressure of oxygen in torr is 0.210 atm x 760/101.325 = 1.55 torr.
The air in the atmosphere is composed of many different gases. The most common of these gases is nitrogen, which makes up 78% of the atmosphere.
Oxygen makes up 21% of the atmosphere, and the other gases make up 1%. The atmospheric pressure is the pressure created by the weight of the gases in the atmosphere.
The atmospheric pressure is measured in units of atmospheres (atm). The atmospheric pressure at sea level is usually around 1 atm, which is equal to 760 mm Hg and 101.325 torr.
This is the same pressure that you feel when you take a breath of air.
The partial pressure of a gas is the amount of pressure exerted by that gas alone, as opposed to the total atmospheric pressure. The partial pressure of oxygen in the atmosphere is 0.210 atm.
This means that, out of the total atmospheric pressure of 1 atm, 0.210 atm of the pressure is from oxygen.
Partial pressure is often measured in units of mm Hg or torr. To convert from atm to mm Hg, the value is multiplied by 760.
Therefore, the partial pressure of oxygen in mm Hg is 0.210 atm x 760 = 158.6 mm Hg and the partial pressure of oxygen in torr is 0.210 atm x 760/101.325 = 1.55 torr.
to know more about partial pressure refer here:
https://brainly.com/question/13199169#
#SPJ11
which enzyme is used to break down triacylglycerol into fatty acids and glycerol?
Triacylglycerol is broken down by the enzyme lipase into fatty acids and glycerol. It is released by the pancreas and other digestive organs and is essential to the body's ability to digest and absorb fats.
Lipase is the enzyme that converts triacylglycerol into fatty acids and glycerol. The pancreas and other digestive organs release lipase, which is essential for the breakdown and absorption of fats in the body. Triacylglycerols are a kind of lipid that is frequently present in meals including meat, dairy goods, and oils. The triacylglycerol molecule's fatty acid ester linkages are hydrolyzed by lipase, releasing the molecules' separate fatty acids and glycerol. The body's cells can utilize these smaller parts for energy or store them as fat when they are absorbed into the circulation and delivered there. Other lipids, including phospholipids and cholesterol esters, are also broken down by lipase. and is essential for maintaining proper lipid metabolism and homeostasis in the body.
learn more about Triacylglycerol here:
https://brainly.com/question/29697122
#SPJ4
Converting moles to mass in grams using dimensional analysis
1. 0. 0728 mol to Silicon
2. 5. 5mol of H2O
3) 0. 0728 of Ca(H2PO4)2
1. 0. 0728 mole to Silicon is equals to 2.044 gram.
2. 5. 5mol of H2O is equals to 99.08 gram.
3. 0. 0728 of Ca(H2PO4)2 is equals to 17.038 gram.
The Moles can be converted to mass in grams by multiplying the molecular weight by the number of moles for the substance. The molecular weight is defined as the number of grams per mole for the substance and gives the conversion factor for moles to grams for that particular substance.
The molecular weight is defined as the mass of a given molecule: it is measured in grams per mole. According to Dalton's different molecules of the same compound may have different molecular masses because they contain different isotopes of an element.
1. 0.0728 mole of silicon.
The molecular weight of silicon is 28.09 g/mole.
= 0.0728 mole * 28.09 g/mole
= 2.044 gram.
2. 5. 5mol of H2O
The molecular weight of water is 18.01528 g/mole.
= 5. 5mole * 18.01528 g/mole
= 99.08 gram
3. 0. 0728 of Ca(H2PO4)2
Molecular weight of Ca(H2PO4)2 is 234.05 g/mole.
= 0. 0728mole * 234.05 g/mole
= 17.038 gram
To learn more about moles
https://brainly.com/question/13314627
#SPJ4
if a molecular substance has strong intermolecular forces, the molecules at the surface of the liquid are held ____ tightly and vaporize _____ easily than molecules with weaker intermolecular forces. the amount of substance in the vapor phase will be ____ than for molecules with weak intermolecular forces and the vapor pressure will therefore be_____. multiple choice question. A. more; less; greater; higher B. less; more; greater; higher C. more; less; less; lower D. less; more; less; lower
The correct option is A. "more; less; greater; higher".
Explanation: Intermolecular forces refer to the forces of attraction and repulsion between molecules. These forces determine the physical properties of a substance, such as melting point, boiling point, and solubility.
A molecular substance with strong intermolecular forces means that the molecules are held tightly together, which requires more energy to overcome to break the bond.
The molecules at the surface of the liquid are held more tightly and vaporize less easily than molecules with weaker intermolecular forces. Molecules with weaker intermolecular forces are more likely to escape from the surface of the liquid and form the vapor phase.
Therefore, the amount of substance in the vapor phase will be less for molecules with strong intermolecular forces.
The vapor pressure is the pressure exerted by the vapor phase of a substance in equilibrium with its liquid or solid phase. The vapor pressure increases as the temperature increases or the amount of substance in the vapor phase increases.
Since the amount of substance in the vapor phase is less for molecules with strong intermolecular forces, the vapor pressure will be greater for molecules with weaker intermolecular forces.
to know more about force refer here
https://brainly.com/question/13191643#
#SPJ11
If a molecular substance has strong intermolecular forces, the molecules at the surface of the liquid are held less tightly and vaporize more easily than molecules with weaker intermolecular forces. The amount of substance in the vapor phase will be greater than for molecules with weak intermolecular forces and the vapor pressure will therefore be higher.The correct answer is b.
Molecules are held together by the force of attraction between the atoms in them, but there are also forces between the molecules. These forces are called intermolecular forces. For example, the intermolecular forces that exist between water molecules are hydrogen bonding, while the intermolecular forces between propane molecules are van der Waals forces.
The boiling point of a liquid is determined by the strength of the intermolecular forces between the molecules that make up the liquid. The stronger the intermolecular forces, the higher the boiling point.
Learn more about intermolecular forces here:
brainly.com/question/9328418
#SMJ11
a dense metal named for its use by romans as pipes for plumbing is called?
The dense metal named for its use by Romans as pipes for plumbing is lead. Lead is a chemical element with the symbol Pb (Latin: plumbum) and atomic number 82.
Lead a heavy metal that is denser than most common materials. Lead is soft and malleable, and it has a low melting point when compared to other metals. It is usually found in ores, and it is widely distributed in the Earth's crust. Lead is pliable and soft, and it also has a low melting point. Lead has a tinge of blue when it is first cut, and it is bright and grey. When exposed to air, it tarnishes to a drab grey tone.
Three of lead's isotopes are ends of significant nuclear decay chains of heavier elements, and lead has the highest atomic number of any stable element. Even trace levels of lead are harmful, especially for young infants. Lead's historical significance:
Lead has been used by humans for thousands of years.
Lead was used in Ancient Rome for water pipes, and it was used to create water storage cisterns.
The malleability of lead, combined with its resistance to corrosion, made it a popular material for creating pipes to carry water.
Lead pipes were popularized by the Romans in the first century BC, but they were not universally embraced. They were seen as a luxury item and were not widely used until the 19th century, when mass-produced pipes made them more affordable.
For more such questions on Lead , Visit:
https://brainly.com/question/29801245
#SPJ11
one way in which photosynthesis in a typical c4 plant differs from that in a c3 plant is that the c4 plant ___.
In contrast to C3 plants, C4 plants have a different leaf structure and metabolic process. Carbon dioxide is first fixed in mesophyll cells of C4 plants.
where it is then transported to bundle sheath cells where it is broken down to release CO2 for the Calvin cycle. The key distinction between C4 and C3 plants is the division of carbon fixation and the Calvin cycle into various cells. C4 plants are more common in arid and semi-arid areas because they are more effective at photosynthesis in hot and dry conditions. In a typical C4 plant, the Calvin cycle and the first fixation of carbon dioxide take place in separate cells, the mesophyll cells, and the resulting four-carbon molecule is then transported to the bundle sheath cells in a C3 plant.
learn more about photosynthesis here:
https://brainly.com/question/29764662
#SPJ4
what gas law(two varible relationship) is employed to deflate a football? state the name and show the equation
The gas law that is employed to deflate a football is Boyle's law.
Boyle's law states that for a fixed amount of gas at a constant temperature, the pressure and volume of the gas are inversely proportional to each other. The equation for Boyle's law is:
[tex]P_{1} V_{1} /P_{2} V_{2}[/tex]
Where [tex]P_{1}[/tex] is the initial pressure of the gas, [tex]V_{1}[/tex] is the initial volume of the gas,[tex]P_{2}[/tex] is the final pressure of the gas, and [tex]V_{2[/tex] is the final volume of the gas. In the case of deflating a football, the pressure of the air inside the football is reduced by letting some of the air out. The volume of the football decreases as the pressure decreases, and this is in accordance with Boyle's law.
Therefore, The Boyle's Law is used to deflate a football. It states that the volume of a gas is inversely proportional to its pressure, when the temperature is constant.
To know more about Boyle's law refer here :
https://brainly.com/question/1696010
#SPJ11
A scientist did a test to compare two substances: substance Q and substance R.
At room temperature, both substances are liquid. When the scientist transferred
the same amount of energy out of both substances, only one substance
changed phase while the other did not. Which substance changed phase, and
how did it change? *
Substance Q changed phase because the attraction of the molecules was able to
overcome their slower movement. Its molecules now move in place.
Substance Q changed phase because the strong attraction between molecules made
their movement slower. Its molecules now move in place.
Substance R changed phase because the weak attraction between molecules let them
move faster. Its molecules now move around each other.
Substance R changed phase because the attraction was able to overcome the slower
molecules. Its molecules now move away from each other.
Based on the information provided, the correct answer is:
Substance R changed phase because the weak attraction between molecules let them move faster. Its molecules now move around each other.
This is because when the scientist transferred the same amount of energy out of both substances, only one substance changed phase while the other did not. This indicates that one of the substances has a lower boiling point than the other. Since both substances are liquids at room temperature, it means that the substance that changed phase must have vaporized (turned into gas) while the other substance did not.
Substance R must have a weaker intermolecular force of attraction between its molecules compared to Substance Q. This means that Substance R has a lower boiling point, which allowed its molecules to move around each other and form a gas phase when energy was transferred out of it. In contrast, Substance Q remained in the liquid phase because its molecules had stronger intermolecular forces of attraction that held them together.
To know more about Molecules, visit: brainly.com/question/19922822
#SPJ4
Can any help with this chemistry question?? I have an exam tomorrow
(20 points)
The standard enthalpy of formation of TiCl₄ (I) is -750kJ mol ⁻¹. The correct answer for the given reaction of Titanium tetrachloride is thus option C.
What is standard enthalpy of formation?The standard enthalpy of formation (ΔH°f) is the modification in enthalpy that happens when one mole of a substance is formed from its component elements in their standard states under standard conditions of temperature and pressure (298 K and 1 atm pressure).
To determine the standard enthalpy of formation for TiCl₄ (I), we need to use Hess's law and combine the given reactions in a way that cancels out all the other reactants and leaves only TiCl₄ (I) as the product. We can achieve this by reversing the first equation and adding it to the second and third equations:
Ti(s) + 2Cl₂(g) + 2CO₂(g) → TiCl₄ (l) + 2CO₂(g) + 2Cl₂(g) ∆H = +232 kJ mol⁻¹
Ti(s) + O₂(g) → TiO₂(s) = −912 kJ mol⁻¹
C(s) + O₂(g) → CO₂(g) = −394 kJ mol⁻¹
Now, we can cancel out the CO₂(g) and Cl₂(g) on both sides and simplify the equation to:
Ti(s) + 2Cl₂(g) + C(s) → TiCl₄ (I) ∆H = +232 kJ mol⁻¹ - 2(-394 kJ mol⁻¹) - 912 kJ mol⁻¹ = -750 kJ mol⁻¹
Therefore, the correct value for the standard enthalpy of formation for TiCl₄ (I) is -750 kJ mol⁻¹.
To find out more about standard enthalpy of formation, visit:
https://brainly.com/question/30264187
#SPJ1
hydrocarbons are composed primarily of which two elements?
Answer: carbon and hydrogen
Explanation:
Hydrocarbons are a group of chemical organic compounds composed of carbon and hydrogen
the percent ionization of a weak acid in water increases as the concentration of acid decreases. the percent ionization of a weak acid in water increases as the concentration of acid decreases. correct incorrect
The statement "the percent ionization of a weak acid in water increases as the concentration of acid decreases" is CORRECT.
It happens because of Le Chatelier's principle which states that a system at equilibrium will respond to any external changes to oppose the changes and re-establish the equilibrium. A weak acid in water is in equilibrium with its ions as follows:
HA (aq) + H2O (l) ⇌ H3O+ (aq) + A- (aq)
Where HA is the weak acid and A- is its conjugate base.
The extent of ionization or dissociation of the weak acid is measured by its degree of ionization which is expressed as a percentage. It can be calculated as:
Degree of ionization = (amount of HA ionized / initial concentration of HA) × 100
As per the statement, if the concentration of the weak acid is decreased, the system is no longer at equilibrium as the amount of HA will decrease. According to Le Chatelier's principle, the system will shift towards the side with more HA molecules to restore equilibrium. This will result in more dissociation or ionization of HA to form H3O+ and A-. Hence, the degree of ionization or percent ionization of the weak acid will increase with a decrease in the concentration of the acid.
Learn more about Le Chatelier's principle at https://brainly.com/question/2943338
#SPJ11
During the 'relative refractory period' of the action potential, the axolemma is more permeable to what?
During the relative refractory period of the action potential, the axolemma is more permeable to potassium ions.
What is axolemma?Axolemma refers to the plasma membrane that surrounds an axon. It is a lipid bilayer that is semipermeable, meaning that it only permits certain molecules and ions to pass through. The action potential is a temporary change in the electrical potential that travels along the axon of a neuron. An action potential is generated when the axon is depolarized, causing a brief, rapid reversal of the polarity of the axolemma. This reversal of polarity triggers the release of neurotransmitters from the axon terminal into the synaptic cleft.
When an action potential is generated, the axolemma becomes more permeable to ions. During the relative refractory period, which is the period immediately following an action potential, the axolemma is more permeable to potassium ions. This increased permeability is due to the opening of voltage-gated potassium channels in the axolemma, which allows potassium ions to move out of the cell.
The relative refractory period is a time when it is harder to generate another action potential in the axon. This is because the threshold for depolarization is higher due to the increased permeability of the axolemma to potassium ions. However, it is still possible to generate another action potential if the stimulus is strong enough to overcome the increased threshold.
Learn more about Relative refractory period here:
https://brainly.com/question/30460363
#SPJ11
where and when in which state is gold found in nature
notable states in the United States where gold is found include California, Alaska, Colorado, Nevada, and South Dakota.
when:(gold rushes)
California (1848-1855)
Colorado (1858-1861)
Alaska (1896-1899)
South Dakota (1874-1877)
Georgia (1828-1849)
Montana (1862-1864)
Nevada (1859-1864)
Oregon (1851-1861)
North Carolina (1799-1848)
The electrons donated to the electron transport chain by NADH activate _____ proton pumps, while those donated by FADH2 activate ______ proton pumps.
The electrons donated to the electron transport chain by NADH activate 4 proton pumps, while those donated by FADH2 activate 2 proton pumps. Electron transport is the process by which electrons are passed from one molecule, such as NADH or FADH2, to another molecule, such as oxygen.
The electrons donated to the electron transport chain by NADH activate 10 proton pumps, while those donated by FADH2 activate 6 proton pumps.
What is the electron transport chain?
The electron transport chain (ETC) is a chain of molecules that move electrons down a gradient from a higher energy state to a lower energy state, releasing energy along the way. In eukaryotic cells, the electron transport chain is located in the inner mitochondrial membrane. Electrons from NADH and FADH2 are passed down the chain in the electron transport chain, which eventually generates a proton gradient used to create ATP. In the electron transport chain, NADH and FADH2 donate electrons to a chain of electron carriers, which then pump protons from the mitochondrial matrix to the intermembrane space. The number of proton pumps activated by electrons donated by NADH and FADH2 differ. Electrons donated by NADH activate ten proton pumps, while electrons donated by FADH2 activate six proton pumps. The electron transport chain is responsible for the generation of the proton motive force used by ATP synthase to create ATP, which is the main source of energy for the cell.
To know more about electron transport chain, click the below link:
https://brainly.com/question/24372542
#SPJ11
a student finds an unlabeled bottle of liquid under his kitchen sink. which investigation would best help him identify the unknown liquid as acidic, basic, or neutral?
Titration is the best investigation to identify an unknown liquid as acidic, basic, or neutral by measuring its pH level.
A student finds an unlabeled bottle of liquid under his kitchen sink. Titration is the investigation that would best help him identify the unknown liquid as acidic, basic, or neutral.
Titration is the chemical method used to find the amount of acid or base in a given substance. This method is a laboratory technique used to measure the concentration of a known solution (the titrant) with a solution of an unknown concentration (the analyte).
The unknown solution is slowly added to the known solution until it reacts completely, allowing us to calculate the concentration of the unknown solution. Titration may be used to identify an unknown solution as acidic, neutral, or basic by determining its pH level. It's a highly precise technique that's often used in analytical chemistry laboratories to measure the concentration of chemicals.
Learn more about liquid: https://brainly.com/question/1313076
#SPJ11
The substrate below is _______ and ______ undergo an Sn2 reaction when treated with a strong nucleophile. a. primary: will b. primary: will not c. secondary: will d. secondary: will not e. tertiary: will f. tertiary: will not
The substrate below is primary and will undergo an [tex]SN^2[/tex] reaction when treated with a strong nucleophile. The correct answer is b. primary: will.
[tex]SN^2[/tex] reaction: [tex]SN^2[/tex] (substitution nucleophilic bimolecular) reaction is a type of reaction mechanism that can be used to describe specific sorts of nucleophilic substitution reactions, in which a central atom is substituted by a nucleophile.There are two key factors that determine the rate of the [tex]SN^2[/tex] reaction: the strength of the nucleophile and the steric hindrance of the substrate.Strong Nucleophile: A strong nucleophile is one that can effectively donate a pair of electrons to a substrate. Strong nucleophiles are classified as "good" nucleophiles, whereas weak nucleophiles are classified as "bad" nucleophiles. An [tex]SN^2[/tex] reaction is typically performed with a strong nucleophile.Substrate: In the [tex]SN^2[/tex]mechanism, primary and secondary alkyl halides are excellent substrates. This is because the carbon atoms in these compounds are not as hindered as those in tertiary alkyl halides. As a result, nucleophiles can readily approach them to displace the leaving group. The tertiary alkyl halides are not good substrates for [tex]SN^2[/tex] reactions because the steric hindrance is too great. Therefore, the substrate below is primary and will undergo an [tex]SN^2[/tex] reaction when treated with a strong nucleophile.Learn more about substitution nucleophilic bimolecular reaction: https://brainly.com/question/30631335
#SPJ11
(3marks) Question.07: Ammonia is produced when nitrogen and hydrogen gases react at high pressures and temperatures: N₂(g) + 3H₂(g) → 2NH3(g) At intervals, the system is cooled to between -10 °C and -20 °C, causing some of the ammonia to liquefy so that it can be separated from the remaining nitrogen and hydrogen gases. The gases are then recycled to make more ammonia An average ammonia plant might make 1000 metric tons of ammonia per day. When 4.0 x 107 L of hydrogen gas at 503 °C and 155 atm reacts with an excess of nitrogen, what is the maximu volume of gaseous ammonia that can be formed at 20.6 °C and 1.007 atm?
The volume of the ammonia that can be produced from the reaction that has been written is; 155 * 10^7 L
What is the ideal gas equation?We know that;
PV = nRT
For the hydrogen;
n = PV/RT
n = 155 * 4.0 x 10^7 /0.082 * 776
n = 620 * 10^7/63.63
n = 9.7 * 10^7 moles
Now the reaction equation is;
N₂(g) + 3H₂(g) → 2NH3(g)
3 moles of hydrogen produced 2 moles of ammonia
9.7 * 10^7 moles will produce 9.7 * 10^7 moles * 2 moles/ 3 moles
x = 6.5 * 10^7 moles
For the volume of the ammonia;
V = nRT/P
V = 6.5 * 10^7 moles * 0.082 * 293.6/1.007
V = 155 * 10^7 L
Learn more about ammonia:https://brainly.com/question/14672082
#SPJ1
The following balanced chemical equation represents the burning of octane, one of the components of gasoline used to fuel engines.2C8H18(g) +25O2(g) --> 16CO2(g) + 18H2O(l)1. How many molecules of carbon dioxide are represented by the equation?2. How many moles of octante are represented by the equation?3. What is the simplified mole ratio of octane to carbon dioxide?4. What is the simplified mole ratio of oxygen to octane?
1. The balanced chemical equation shows that for every 2 molecules of octane burned, 16 molecules of carbon dioxide are produced. Therefore, the number of molecules of carbon dioxide represented by the equation is 16.
Solutions to rest of the questions2. The balanced chemical equation shows that for every 2 molecules of octane burned, 25 molecules of oxygen are required. Therefore, the ratio of octane to oxygen is 2:25. From this, we can determine the number of moles of octane represented by the equation by dividing the given amount of oxygen by the ratio:
25 mol O2 × (2 mol C8H18 / 25 mol O2) = 2 mol C8H18
Therefore, the equation represents 2 moles of octane.
3. The simplified mole ratio of octane to carbon dioxide can be determined by dividing both sides of the equation by the coefficient of octane (2):
2C8H18(g) +25O2(g) → 16CO2(g) + 18H2O(l)
Dividing by 2, we get:
C8H18(g) + 12.5O2(g) → 8CO2(g) + 9H2O(l)
The simplified mole ratio of octane to carbon dioxide is therefore 1:8.
4. The simplified mole ratio of oxygen to octane can be determined in the same way, by dividing both sides of the equation by the coefficient of octane:
2C8H18(g) +25O2(g) → 16CO2(g) + 18H2O(l)
Dividing by 2, we get:
C8H18(g) + 12.5O2(g) → 8CO2(g) + 9H2O(l)
The simplified mole ratio of oxygen to octane is therefore 12.5:1.
Learn more about octane here https://brainly.com/question/29657423
#SPJ1
According to the following reaction, how many grams of hydrogen iodide will be formed upon the complete reaction of 26.1 grams of iodine with excess hydrogen gas?
hydrogen (g) + iodine (s) hydrogen iodide (g)
According to the following reaction, 26.1 grams of iodine will react with an excess of hydrogen gas to form 27.4 grams of hydrogen iodide:
2HI(g) + I2(s) → 2H2(g) + 2I(s)
To calculate the number of grams of hydrogen iodide formed, use the following equation:
moles of I2 = 26.1g / 126.90g/mol = 0.205 mol I2
Since there is an excess of hydrogen gas, the number of moles of the hydrogen gas used is equal to the number of moles of I2, which is 0.205 mol.
Number of moles of hydrogen iodide formed = 2 x 0.205 = 0.41 mol
Therefore, the number of grams of hydrogen iodide formed = 0.41 mol x 127.90g/mol = 52.6g
Therefore, 52.6g of hydrogen iodide is formed when 26.1g of iodine reacts with an excess of hydrogen gas.
to know more about chemical reactions refer here:
https://brainly.com/question/29762834#
#SPJ11
At what Celsius temperature will argon have a density of 10.3 g/L and a pressure of 6.43 atm?
(31 deg. C)
At 31.52° Celsius temperature will argon have a density of 10.3 g/L and a pressure of 6.43 atm . This is given by ideal gas law.
What is ideal gas ?An ideal gas is a theoretical gas composed of many randomly moving point particles that do not interact with one another. The ideal gas concept is useful because it obeys the ideal gas law, which is a simplified equation of state, and is amenable to statistical mechanics analysis. The requirement of zero interaction is frequently relaxed if the interaction is perfectly elastic or regarded as point-like collisions, for example. When intermolecular forces and molecular size become important, the ideal gas model tends to fail at lower temperatures or higher pressures. It also fails for most heavy gases, including many refrigerants,[2] as well as gases with strong intermolecular forces, most notably water vapor. At high pressures, the volume of a real gas is frequently much larger than that of a pure gas.
using the formula
P × M = d × R × T
Where P = pressure = 6.43 atm
m= molar mass = 40 g
d = density = 10.3 g/L
T = temperature
R = 0.082057 L atm K⁻¹ mol⁻¹
solving for T ,
T = 31.52°C
To know more about ideal gas , visit ;
brainly.com/question/28257995
#SPJ1
1.it has been suggested that drying agents can be collected after an experiment and the hydrated salt heated in an oven to drive off the water. the recycled drying agent can then be used again for another experiment. is this a good idea? give advantages and disadvantages of this proposal.
Yes, this is a good idea as it is an efficient use of resources. Advantages include reduced costs of purchasing new drying agents and decreased wastage of materials. Disadvantages could include loss of quality of the recycled drying agent, and extra energy used to dry out the salt.
Drying agents can be collected after an experiment and the hydrated salt heated in an oven to drive off the water. The recycled drying agent can then be used again for another experiment.
What are drying agents?
In order to absorb water vapor, drying agents are added to organic solvents to make them anhydrous.
What are the advantages and disadvantages of recycling drying agents?
The recycling of drying agents has a few advantages and disadvantages:
Advantages of recycling drying agents:
Cost-effective: If the solvent used is expensive, recycling drying agents can save money. A drying agent like anhydrous magnesium sulfate is a good example since it can be reused numerous times. No pollution: The disposal of waste is reduced. If every time a new drying agent is employed, it must be disposed of properly, which is both time-consuming and costly. The amount of waste that has to be disposed of is reduced if the same drying agent is used repeatedly. Recyclable waste: Used drying agents are recyclable. It's just a matter of heating the salt to remove any water and returning it to the drying agent stock. This procedure helps to prevent waste.
Disadvantages of recycling drying agents:
Contamination: Even though the recycled drying agent is supposed to be pure, it may still contain minor quantities of impurities, which might result in contamination of the final product. Impurities: If the drying agent is not cleaned properly, impurities will be transferred from one experiment to the next. Excessive heating: Anhydrous drying agents should not be heated excessively because they may lose their effectiveness. If the salt is heated for too long, the surface area exposed to moisture will be decreased. Therefore, while recycling drying agents is a good idea, some precautions should be taken to ensure that the drying agent is pure and effective.
For more details follow the link: https://brainly.com/question/30712002
#SPJ11
74. 5 g of KCl was dissolved in 1000. ML of water. What is the
molality of the solution? (Molar mass of KCI = 74. 5 g/mol)
m.
The molarity of the solution is 1.0 m
The first step is to convert the mass of KCl to moles:
Number of moles of KCl = 74.5 g / 74.5 g/mol = 1.0 mol
Next, we need to calculate the mass of water in kilograms:
Mass of water = 1000 mL x 1 L/1000 mL x 1 kg/L = 1 kg
Now we can calculate the molality of the solution:
Molality = moles of solute / mass of solvent (in kg)
Molality = 1.0 mol / 1 kg = 1.0 m
Therefore, the molality of the solution is 1.0 m.
To know more about molarity click here:
brainly.com/question/8732513
#SPJ4
rank the following alkyl halides in order of their increasing rate of reaction with triethylamine: iodoethane 1-bromopropane 2-bromopropane
The order of increasing reaction rate of alkyl halides with triethylamine is iodoethane, 1-bromopropane, and 2-bromopropane.
When the primary alkyl halide reacts with the triethylamine, it's faster than the secondary alkyl halide. Since triethylamine is a strong, bulky base that tends to perform nucleophilic substitution, it undergoes a reaction with both primary and secondary alkyl halides. When halides react with triethylamine, the bond between nitrogen and carbon is formed.
In this reaction, the rate of reaction will be slower with secondary alkyl halides due to steric hindrance. Iodoethane will be more reactive than 1-bromopropane because of the higher electronegativity of iodine which makes it more prone to nucleophilic substitution. Based on the above discussion, the order of increasing rate of reaction with triethylamine is 2-bromopropane < 1-bromopropane < iodoethane.
Therefore, iodoethane is the most reactive of the three alkyl halides, 1-bromopropane is more reactive than 2-bromopropane and 2-bromopropane is the least reactive.
To know more about alkyl halides, refer here:
https://brainly.com/question/17063582#
#SPJ11
When it fails to occur, is the chemical basis for a metabolic syndrome in which the body fails to breakdown fatty acids?
Yes, the chemical basis for a metabolic syndrome is the failure of the body to breakdown fatty acids.
What is Metabolic syndrome?Metabolic syndrome is used to describe a collection of health problems that increase the risk of developing other diseases such as diabetes, heart disease, and stroke. The primary cause of metabolic syndrome is obesity, which is why it is frequently referred to as "obesity syndrome."
The syndrome is also linked to other genetic and environmental factors that contribute to insulin resistance, inflammation, and high blood pressure, as well as a failure to break down fatty acids properly in the body. Thus, the chemical basis for metabolic syndrome is the failure to break down the fatty acids in body. This chemical problem can contribute to the development of other fatal diseases and health problems.
Learn more about Metabolic syndrome here:
https://brainly.com/question/31106238
#SPJ11
