The angular momentum quantum number (l) value of 0 indicates the ________ subshell.

Answer:look down below

Explanation:

The statements that are true about hands that are immersed in the water are:

1. The hand that was in hot water would feel cold.

2. The hand that was in cold water would feel hot.

The correct option is B 1. and 2.

Temperature is the measurement of the hotness or coldness of any object. It is measured in Celsius or kelvin. Our body has nerves that feel the different temperatures of any object. The high temperature is called hot and the low temperature is called cold.

When Louis put his hand in the warm water and one hand in the cold water. He feels the temperature of both glasses of water. Then he put both hands in the normal water.

So the hand that is warm would feel the water as cold and the hand with cold water would feel the water as hot.

Thus, the correct option is B. 1. and 2.

Learn more about temperature, here:

https://brainly.com/question/15267055

#SPJ5

Answer:

a.draw 2,3 dicholoro octane

Explanation:

mag isip ka kung paano hehe

Answer:

8 oxygen. 9 flourine. 10. Neon. 5 Boron

Answer:

0.53atm = P2

Explanation:

Gas at 1.00atm and 20°C. Temperature increased to 40°C...

We can solve this question using combined gas law:

P1*V1 / T1 = P2*V2 / T2

Where P is pressure, V volume and T absolute temperature of 1, initial state and 2, final state.

Compunting the values of the problem:

P1 = 1.00atm

V1 = 250mL

T1 = 20°C + 273.15 = 293.15K

P2 = ?

V2 = 500mL

T2 = 40°C + 273.15 = 313.15K

1.00atm*250mL / 293.15K = P2*500mL / 313.15K

Answer:

b. a H+ ion

Explanation:

The concept of conjugate acid-base pair is related to Bronsted-Lowry acid-base theory and according to this theory, acid is a proton acceptor.

In short,

conjugate base is formed when an acid donates a proton.

conjugate acid is formed when a base accepts a proton.

There are 3.43 × [tex]10^{56}[/tex] atom will be present in 5.70 x [tex]10^{32}[/tex] mol of Rn.

The basic number of matter that may be broken even without producing electrically charged molecules is the atom.

Calculation of atom:

It is given that number of mol = 5.70 x [tex]10^{32}[/tex] mol.

Then, the number of atom = 5.70 x [tex]10^{32}[/tex] mol × 6.02 × [tex]10^{23}[/tex].= 3.43 × [tex]10^{56}[/tex] atom.

Therefore, there are 3.43 × [tex]10^{56}[/tex] atom will be present in 5.70 x [tex]10^{32}[/tex] mol of Rn.

To know more about atom.

https://brainly.com/question/1566330

#SPJ3

Answer:

The answer is

-control rods

Answer:

B. Control Rods.... via A P E X

Answer:

a

Explanation:

documentary is best researcher!.

Solution :

a). The separation of 4-methylbenzoic acid from 1,4-dimethoxybenzene will work but it will result in lower recovery.

In the reaction of acid-base to form a sodium 4 - methoxy benzoate, that is soluble in the water, 4-methoxy benzoic acid reacts with the sodium bicarbonate to give sodium 4-methoxybenzoate as well as carbonic acid.

b). The pKa for the 4-methoxybenzoic acid is [tex]4.46[/tex], and that of carbonic acid is [tex]6.37[/tex]

c). The Keq for the reaction is [tex]10(6.37 - 4.46) = 101.91[/tex]

Therefore, the equilibrium lies to the right  and also the reaction favors the products and the separation works.

But the recovery will be low when compared to the extraction with Sodium hydroxide as the strong base will drive the equilibrium further to the right position, thus neutralizing all the acids virtually. And the weak base will partially neutralize the acid.

Answer:

azertyuiopazertyuiiop

Answer:

747.5 mL

Explanation:

Assuming ideal behaviour, we can solve this problem by using Boyle's law, which states that at constant temperature:

Where in this case:

We input the data given by the problem:

And solve for V₁:

Answer:

liquefied petroleum gas

LPG is prepared by refining natural gas. it is made by refining crude oil or from extracted natural gas streams as they emerge from the ground.

Answer:

7.640 kg

Explanation:

Step 1: Write the balanced complete combustion equation for ethanol

C₂H₆O + 3 O₂ ⇒ 2 CO₂ + 3 H₂O

Step 2: Calculate the moles corresponding to 4 kg (4000 g) of C₂H₆O

The molar mass of C₂H₆O is 46.07 g/mol.

4000 g × 1 mol/46.07 g = 86.82 mol

Step 3: Calculate the moles of CO₂ released

86.82 mol C₂H₆O × 2 mol CO₂/1 mol C₂H₆O = 173.6 mol CO₂

Step 4: Calculate the mass corresponding to 173.6 moles of CO₂

The molar mass of CO₂ is 44.01 g/mol.

173.6 mol × 44.01 g/mol = 7640 g = 7.640 kg

Answer:

2.29 M

Explanation:

Equation of the reaction;

Ca(OH)2(aq) + 2HClO4(aq) → 2H2O(l) + Ca(ClO4)2(aq)

Concentration of acid CA = 1.49 M

Concentration of base CB= ????

Volume of acid VA= 43.0 ml

Volume of base VB= 14.0 ml

Number of moles of acid NA = 2 moles

Number of moles of base NB = 1 mole

CAVA/CBVB = NA/NB

CAVANB =CBVBNA

CB= CAVANB/VBNA

CB= 1.49 × 43.0 × 1/14.0 × 2

CB= 2.29 M

Answer:

a. [tex]Ag^0[/tex]

b. [tex]Ag^{+}[/tex]

c. [tex]Ca^{2+}F_2^-[/tex]

d. [tex]H_2^+S^{2-}[/tex]

e. [tex](C^{4+}O_3^{2-})^{-}[/tex]

f. [tex](Cr^{6+}O_4^{2-})^{2-}[/tex]

g. [tex]Cl_2^0[/tex]

h. [tex]Fe^0[/tex]

i. [tex]Cu^{2+}Cl_2^-[/tex]

j. [tex]C^{4-}H_4^+[/tex]

Explanation:

Hello there!

In this case, according to the concept of charge balance, which tell us that the overall charge is zero for any compound, except ions, it turns out possible to proceed as follows:

a. [tex]Ag^0[/tex]

b. [tex]Ag^{+}[/tex]

c. [tex]Ca^{2+}F_2^-[/tex]

d. [tex]H_2^+S^{2-}[/tex]

e. [tex](C^{4+}O_3^{2-})^{-}[/tex]

f. [tex](Cr^{6+}O_4^{2-})^{2-}[/tex]

g. [tex]Cl_2^0[/tex]

h. [tex]Fe^0[/tex]

i. [tex]Cu^{2+}Cl_2^-[/tex]

j. [tex]C^{4-}H_4^+[/tex]

Keep in mind lonely elements have 0 as their oxidation state.

Regards!

Answer:

Explanation:

From the given information:

We are to make use of the spinach absorbance extract which is the corrected absorbance  (y) = 0.306

And also the trendline equation:

y = 1609x + 0.0055

where,

x = absorbance of the spinach extract.

∴

0.306 = 1609x + 0.0055

collecting the like terms

0.306 - 0.0055 = 1609x

0.3005  = 1609x

x = 0.3005/1609

x = 1.8676 × 10⁻⁴

x ≅ 0.0002 M

No. of grams for the chlorophyll can be computed as follows:

recall that:

molar mass of chlorophyll = 893.5 g/mol

the volume = 25ml = (25/1000) L = 0.025 L

∴

In spinach solution, the no. of grams for the chlorophyll:

= (0.0002) mol/L × (893.5 g/mol) × (0.025) L

= 0.0044675 g

≅ 0.0045 g

In the spinach, the concentration of chlorophyll = no of grams of chlorophyll/ mass of the spinach

= 4.5 mg/0.1876 g

= 23.987 mg/g

≅ 24 mg/g

From the given information:

Chlorophyll is any member of the class of the green pigments involved in the photosynthesis process.

And also the trendline equation:

y = 1609x + 0.0055

where,

x = absorbance of the spinach extract.

so 0.306 = 1609x + 0.0055

collecting the like terms

0.306 - 0.0055 = 1609x

0.3005  = 1609x

x = 0.3005/1609

x = 1.8676 × 10⁻⁴

x ≅ 0.0002 M

2. No.of grams for the chlorophyll can be computed as follows:

recall that:

molar mass of chlorophyll = 893.5 g/mol

The volume = 25ml = (25/1000) L = 0.025 L

Therefore:

In spinach solution, the no. of grams for the chlorophyll:

= (0.0002) mol/L × (893.5 g/mol) × (0.025) L

= 0.0044675 g

≅ 0.0045 g

3. In the spinach, the concentration of chlorophyll = no of grams of chlorophyll/ mass of the spinach

= 4.5 mg/0.1876 g

= 23.987 mg/g

≅ 24 mg/g

Read more about chlorophyll here:

https://brainly.com/question/3529377

Answer:

Water and Aluminium oxide

Explanation:

Have a nice day.

Answer:

C. The enthalpy of the products is higher than that of the reactants

Explanation:

An endothermic process is any process with an increase in the enthalpy of the system

The enthalpy of the products is higher than that of the reactants describes an endothermic process. Therefore, option (C) is correct.

An endothermic process can be described as any thermodynamic process with an increase in the enthalpy H of the system. In such a process, a closed system commonly absorbs thermal energy from its surroundings.

An endothermic reaction leads to an increase in the temperature of the system and a decrease temperature of the surroundings. A physical process, such as the melting of ice cubes is an endothermic process.

Whether a process can take place spontaneously depends not only on the enthalpy change but also on the entropy change and absolute temperature.

An endothermic process commonly needs a favorable entropy increase  (∆S > 0) in the system. In an endothermic process, the energy of the products is higher than that of the reactants.

Learn more about the endothermic process, here:

https://brainly.com/question/13818956

#SPJ5

Answer:

Hydrogen and fluorine form only one bond while carbon forms four bonds to other atoms.

Explanation:

This question brings us to the idea of valency. Fluorine is univalent while carbon is tetravalent.

Univalent means that fluorine can only form one bond to hydrogen while carbon forms as much as four bonds because it is tetravalent.

Hence fluorine and hydrogen have only one peg while carbon has four.

Answer:

Chloride ion is a strong nucleophile and bromide is a good leaving group. The major product of treating (S)-2-bromobutane with NaCl in CH3C(O)CH3 (acetone) is _________. (1S,2R)-1-chloro-2-bromobutane cis-2-butene (1R,2S)-1-chloro-2-bromobutane (S)-2-chlorobutane trans-2-butene (R)-2-chlorobutane

Explanation:

The reaction of (S)-2-bromobutane with NaCl in CH3C(O)CH3 (acetone) forms the following product:

The answer is (R)-2-chlorobutane.

The reaction take splace through [tex]S_{N} _2[/tex] mechansim and inversion in configuration happens.

Answer:

Water H2O + SULPHATE OXIDE

Answer:

The choice that is not an indicator of a chemical change is "State of matter changes". More common than not, chemical reactions produce energy in the form of light or heat. Along with energy, they also produce a new substance called the product that could be in any state of matter (solid, gas, or liquid).

Explanation:

Answer:

The Rf value of ibuprofen increases

Explanation:

TLC involves the elution of a solute using a mobile phase(solvent). The stationary phase is made of an adsorbent such as silica.

The extent of interaction between the solute and the mobile phase affects the Rf value. The greater the interaction between the solute and the solvent, the greater the Rf value.

On the other hand, the polarity of the solvent and the solute also affects the Rf value. If the solvent is changed from t-butyl methyl ether to acetone, the Rf value for ibuprofen increases because ibuprofen is polar and acetone is also polar hence there is greater interaction between the solvent and solute.

Answer:

We know that the student was measuring a spectrum, and observed double yellow lines, he claimed that it was Sodium.

There are multiple elements with double yellow lines, like Mercury or Sodium, but Sodium has two bright yellow lines, so it is usually identified by them.

So when we look at a spectrum and we see a strong doublet in the yellow range, we can easily assume that it is Sodium.

Here we assume that the student only saw the yellow doublet, this would imply that the yellow doublet is way more intense than the other lines, that can't be seen (while for other elements with double yellow lines, we should see other lines with similar intensity) then we can conclude that it is Sodium.

The student is correct.

Answer:

dissolved in the solute

Explanation:

A solvent is the component that dissolves the solute and is present in larger amount. The type of solution is determined by the state of the solute and solvent. If you have NaCl, a solid, dissolved in water, a liquid, the type of solution is a solid/liquid solution.

Answer:

3.88 atm

Explanation:

We'll begin by calculating the number of mole of CO₂ in each case. This can be obtained as follow:

For 2.50 g of CO₂:

Mass of CO₂ = 2.5 g

Molar mass of CO₂ = 12 + (2×16) = 44 g/mol

Mole of CO₂ =?

Mole = mass / molar mass

Mole of CO₂ = 2.5 / 44

Mole of CO₂ = 0.06 mole

For 0.42 g of CO₂:

Mass of CO₂ = 2.5 g

Molar mass of CO₂ = 44 g/mol

Mole of CO₂ =?

Mole = mass / molar mass

Mole of CO₂ = 0.42 / 44

Mole of CO₂ = 0.010 mole

Finally, we shall determine the new pressure. This can be obtained as follow:

Initial mole (n₁) = 0.06 mole

Initial pressure (P₁) = 4.65 atm

Final mole (n₂) = 0.06 – 0.010 = 0.05 mole

Final pressure (P₂) =?

NOTE: Temperature and volume is constant.

P₁ / n₁ = P₂ / n₂

4.65 / 0.06 = P₂ / 0.05

Cross multiply

0.06 × P₂ = 4.65 × 0.05

0.06 × P₂ = 0.2325

Divide both side by 0.06

P₂ = 0.2325 / 0.06

P₂ = 3.88 atm

Thus, the new pressure is 3.88 atm.

Answer:

118.06 mL

Explanation:

The neutralization reaction between HBr (acid) and Ba(OH)₂ (base) is the following:

2HBr + Ba(OH)₂ → BaBr₂ + 2H₂O

According to the equation, 2 moles of HBr react with 1 mol Ba(OH)₂. Thus, at the equivalence point the moles of acid and base react completely:

2 moles HBr = 1 mol Ba(OH)₂

We can replace the moles by the product of the molar concentration (M) and volume (V):

2 x (M HBr) x (V HBr) = M Ba(OH)₂ x V Ba(OH)₂

Now, we introduce the data in the equation to calculate the volume in mL of Ba(OH)₂:

V Ba(OH)₂ = (2 x (M HBr) x (V HBr))/M Ba(OH)₂

                 = (2 x 0.311 M x 57.7 mL)/(0.304 M)

                 = 118.06 mL

Therefore, 118 mL of Ba(OH)₂ are needed.

Answer:

2

Explanation:

2 alkenes are formed by E2 elimination of HBr from 3-bromo -3, 4 - dimethylhexane using a strong base such as sodium methoxide

Answer:

oshfjidgshsjdh

Explanation:

918474828