Suppose that the C=O group in a peptide bond can be regarded as isolated from the rest of the molecule. Given that the force constant of the bond in a carbonyl group is 908 N m−1 , calculate the vibrational frequency of (a) 12C=16O and (b) 13C=16O.

I have the answers. I am bit confused of how the units come about. Please help

Answers

Answer 1

a.

The vibrational frequency of the C=O bond in 12C=16O is approximately 1.78 s−1.

b.

The vibrational frequency of the C=O bond in 13C=16O is approximately 1.87 s−1.

How do we calculate?

The vibrational frequency of a bond can be calculated as:

v = 1/2π x √(k/μ)

where μ = m1 x m2 / (m1 + m2)

(a) For 12C=16O:

The mass of ^12C is 12 atomic mass units (amu), and the mass of ^16O is 16 amu.

μ = 12 x 16 / (12 + 16)

μ = 7.2 amu

v = 1/2π x √(908 N m−1 / 7.2 amu)

v = 1/2π x √(126.11 N m−1 amu−1)

v = 1/2π x 11.22 s−1

v ≈ 1.78 s−1

hence the vibrational frequency of the C=O bond in 12C=16O is approximately 1.78 s−1.

(b) For 13C=16O:

The mass of ^13C is 13 amu, and the mass of ^16O is 16 amu.

μ = 13 x 16 / (13 + 16)

μ = 6.6 amu

v = 1/2π x √(908 N m−1 / 6.6 amu)

v = 1/2π x √(137.58 N m−1 amu−1)

v = 1/2π x 11.74 s−1

v ≈ 1.87 s−1

Hence, the vibrational frequency of the C=O bond in 13C=16O is approximately 1.87 s−1.

Learn more about vibrational frequency at: https://brainly.com/question/27816476

#SPJ1


Related Questions

Consider the following silica gel TLC plate of compounds A, B, and C developed in hexanes:
Consider the following silica gel TLC plate of com
a) Determine the R f values of compounds A, B, and C run on a silica gel TLC plate using hexanes as the solvent
b) Which compound, A, B, or C, is the most polar?
c) What would you expect to happen to the R f values if you used acetone instead of hexanes as the eluting solvent? (Think polarity of solvents)

Answers

The R f values for compounds A, B, and C on a silica gel TLC plate developed in hexanes would be determined by measuring the distance each compound traveled compared to the distance the solvent traveled.

a) There is a 4 cm gap between the origin and the solvent front. The Rf value for spot A is[tex]\frac{1.5}{4}= 0.375[/tex], because it travelled 1.5 cm. Due to the 3.5 cm movement of Spot B, its Rf is[tex]\frac{3.5}{4} = 0.875[/tex]. Spot C shifted 3 cm, making its Rf [tex]\frac{3}{4} = 0.75[/tex].

b)Due to its shorter travel distance than the other two compounds, compound A is the most polar. Recall that polar substances adhere to the adsorbent more readily, move less, and have a lower Rf value.

c)Hexanes is less polar than acetone as a solvent. Each of the three compounds would move more quickly if the same method were employed to elute them.The chemicals can be removed from the polar adsorbent more effectively with a more polar eluting solvent. Each compound would have a higher Rf value if acetone were used to elute the TLC plate as opposed to hexanes because each compound travels more quickly.

learn more about  Rf value Refer:brainly.com/question/17796724

#SPJ1

For the reaction, 2NO(g) + 2H2 (g) = N2 (g) 2H2O(g), it is determined that; at equilibrium at a particular temperature, the concentrations are as follows: [NO]-0.0081 M, [Hz]-4.1x 10-5 M [N2]= 5.3 x 10-2 M, and [H2O]-2.9 x I0-3M. Calculate the value of Keq and KP for this system at 298 K_

Answers

The equilibrium constant Keq is 640.86 and the equilibrium constant KP is 0.0198 for the given reaction at 298 K.

How do you calculate the values of Keq and KP for this system?

The balanced chemical equation for the given chemical reaction is:

2NO(g) + 2H₂(g) ⇌ N₂(g) + 2H₂O(g)

where ⇌ indicates a state of equilibrium.

The equilibrium concentrations are:

[NO] = 0.0081 M

[H₂] = 4.1 × 10⁻⁵ M

[N₂] = 5.3 × 10⁻² M

[H₂O] = 2.9 × 10⁻³ M

The equilibrium constant, Keq, is given by:

Keq = [N₂][H₂O]² / [NO]²[H₂]²

Substituting the given values:

Keq = (5.3 × 10⁻²) (2.9 × 10⁻³)² / (0.0081)² (4.1 × 10⁻⁵)²

Keq = 640.86

The equilibrium constant in terms of partial pressures, KP, is related to Keq as follows:

KP = Keq(RT)^Δn

where R is the gas constant, T is the temperature in Kelvin, and Δn is the difference between the total number of moles of gaseous products and the total number of moles of gaseous reactants.

For the given reaction:

Δn = (1 + 2) − (2 + 2) = −1

Substituting the values:

KP = 640.86 (0.08206)(298)⁻¹

KP = 0.0198

Therefore, the equilibrium constant Keq is 640.86 and the equilibrium constant KP is 0.0198 for the given reaction at 298 K.

To know more about equilibrium constant, visit:

https://brainly.com/question/15118952

#SPJ1

b) Verify by calculation what volume of the base it should take to neutralize 50.0 mL of 0.1 M HCl (aq)
with 0.1 M NaOH(aq).

Answers

Answer:

50 ml

Explanation:

n = moles

c = concentration

v = volume

n = c × v

HCl + NaOH --> NaCl + H2O

HCl:

50 ml = 50 cm³ = 0.05 dm³

n = 0.05 × 0.1

n = 0.005

Ratio of HCl to NaOH:

HCl : NaOH

Based on reaction equation:

1 : 1

0.005 : x

x = 0.005

NaOH:

0.005 = 0.1 × v

v = 0.05

0.05 dm³ = 50 cm³ = 50 ml

How many calories are required to raise the temperature of a 35.0 g sample from 35 °C to 85 °C? The sample has a specific heat of 0.108 cal/g °C.

Answers

Answer:

First, we need to calculate the change in temperature:

ΔT = final temperature - initial temperature

ΔT = 85 °C - 35 °C

ΔT = 50 °C

Next, we can use the following formula to calculate the heat energy required:

Q = m·C·ΔT

where Q is the heat energy in calories, m is the mass of the sample in grams, C is the specific heat in cal/g °C, and ΔT is the change in temperature in °C.

Plugging in the given values, we get:

Q = 35.0 g · 0.108 cal/g °C · 50 °C

Q = 189.0 calories

Therefore, 189.0 calories are required to raise the temperature of the sample from 35 °C to 85 °C

What is the pH of 0.335 M trimethylammonium chloride, (CH3)3NHCI? The Kb of trimethylamine, (CH3)3N, is 6.3 x 10-5. (value = 0.02)

Answers

The pH of 0.335 M trimethylammonium chloride, (CH3)3NHCI is approximately 5.676.

What is pH?

To find the pH of the solution, we need to first determine if (CH3)3NHCI acts as an acid or base. Since (CH3)3NHCI is a salt composed of a weak base, trimethylamine, and a strong acid, hydrochloric acid (HCI), it will undergo hydrolysis in water.

The hydrolysis reaction is given by:

(CH3)3NH+ (aq) + H2O (l) ⇌ (CH3)3N (aq) + H3O+ (aq)

The Kb expression for the equilibrium reaction is:

Kb = [ (CH3)3N ] [ H3O+ ] / [ (CH3)3NH+ ]

Since (CH3)3NH+ and HCl dissociate completely in water, the initial concentration of (CH3)3NH+ is equal to the concentration of (CH3)3NHCI, which is 0.335 M.

Using the Kb value given, we can solve for the concentration of H3O+:

Kb = 6.3 x [tex]10^{-5}[/tex] = [ (CH3)3N ] [ H3O+ ] / 0.335

[ H3O+ ] = Kb x (CH3)3NH+ / (CH3)3N

[ H3O+ ] = 6.3 x [tex]10^{-5}[/tex] x 0.335 / 1

[ H3O+ ] = 2.1095 x [tex]10^{-6}[/tex] M

Finally, we can calculate the pH using the expression:

pH = -log [H3O+]

pH = -log (2.1095 x [tex]10^{-6}[/tex])

pH = 5.676

Therefore, the pH of the solution is approximately 5.676.

To know more about pH, visit:

https://brainly.com/question/15289741

#SPJ1

Complete question is: The pH of 0.335 M trimethylammonium chloride, (CH3)3NHCI is approximately 5.676.

Ethanol (C2H5OH) boils at a temperature of 78.3 degrees C. What amount of energy, in joules, is necessary to heat to boiling and then completely vaporize a 13.1 g sample of ethanol initially at a temperature of 11.1 degrees C? The specific heat of ethanol is approximately constant at 2.44 JK−1g−1. The heat of vaporization of ethanol is 38.56 kJ mol−1.

Answers

The total amount of energy necessary to heat and vaporize a 13.1 g sample of ethanol initially at a temperature of 11.1 degrees C is 7.15 kJ.

To calculate the amount of energy, in joules, necessary to heat and vaporize a 13.1 g sample of ethanol initially at a temperature of 11.1 degrees C, we must first calculate the heat necessary to heat the sample to the boiling point of ethanol, 78.3 degrees C. The formula to calculate the amount of energy is: Q = mcΔT, where m is the mass of the sample, c is the specific heat of ethanol, and ΔT is the temperature change from 11.1 degrees C to 78.3 degrees C. Thus, the amount of energy necessary to heat the sample is: Q = 13.1 g * 2.44 JK−1g−1 * (78.3-11.1) = 1,623.08 J.
Next, we must calculate the amount of energy necessary to completely vaporize the sample. To do so, we must use the heat of vaporization of ethanol, which is 38.56 kJ mol−1. To convert from moles to grams, we must use the molar mass of ethanol, which is 46 g/mol. Thus, the amount of energy necessary to vaporize the sample is: Q = (13.1 g/46 g/mol) * 38.56 kJ/mol = 7.15 kJ.
Finally, to calculate the total amount of energy necessary to heat and vaporize the sample, we must add the two values together: Q = 1,623.08 J + 7.15 kJ = 7.15 kJ. the total amount of energy necessary to heat and vaporize a 13.1 g sample of ethanol initially at a temperature of 11.1 degrees C is 7.15 kJ.

For more such questions on ethanol

https://brainly.com/question/29523373

#SPJ11

How Scandium affects the government

Answers

bababoy jijijijajdiwhrjfofhebdlodvebfif

Jykylykkyjyjykyknsbdkylxldnsbskdldlndkdkd

1) what is the empirical formula of a molecule containing 65.5% carbon, 5.5% hydrogen, and 29% oxygen? worksheet

Answers

The empirical formula of a molecule containing 65.5% carbon, 5.5% hydrogen, and 29% oxygen is CH2O.

To calculate this, you need to first convert the percentage composition into mass composition. This is done by multiplying the percentages by the molecular weight of each element.

Carbon: 65.5% x 12 g/mol = 0.786 g/mol
Hydrogen: 5.5% x 1 g/mol = 0.055 g/mol
Oxygen: 29% x 16 g/mol = 0.464 g/mol
Now that you have the mass composition, you can calculate the moles of each element by dividing the mass of each element by its molar mass.
Carbon: 0.786 g/mol / 12 g/mol = 0.065 mol
Hydrogen: 0.055 g/mol / 1 g/mol = 0.055 mol
Oxygen: 0.464 g/mol / 16 g/mol = 0.029 mol
Finally, divide each element's moles by the smallest moles to get the empirical formula.

Carbon: 0.065 mol / 0.029 mol = 2.24 = 2 mol
Hydrogen: 0.055 mol / 0.029 mol = 1.90 = 1 mol
Oxygen: 0.029 mol / 0.029 mol = 1.00 = 1 mol
Therefore, the empirical formula of the molecule is CH2O.

For more such questions on empirical formula , Visit:

https://brainly.com/question/1603500

#SPJ11

For the following reaction, which of the reactants would be the acid?

HNO2 ( aq ) + HS - ( aq ) → NO2 - ( aq ) + H2S ( aq )



Select one:

a.
HS -


b.
H2O


c.
NO2 -


d.
HNO2

(Chem 2 Quiz 3.1)

Answers

The acid in the reaction would donate a proton and that would be HNO2.

How do you know an acid in a reaction?

An acid in a chemical reaction can be identified by the presence of hydrogen ions (H+): Acids are compounds that produce hydrogen ions when dissolved in water. In a chemical reaction, an acid may donate a hydrogen ion to another compound or accept a pair of electrons from a base.

When we look at the reaction, we can see that the specie that has given out the replaceable hydrogen ion is HNO2 thus it is the acid in the reaction.

Learn more about acid:https://brainly.com/question/14072179

#SPJ1

which of the following statements may be true regarding a biochemical oxidation-reduction (redox) reaction?

Answers

A few statements may be true regarding a biochemical oxidation-reduction (redox) reaction. The statements are as follows: A redox reaction occurs when there is a transfer of electrons between molecules or atoms.

The electron donor becomes oxidized, and the electron acceptor is reduced, causing a transfer of energy. A redox reaction produces ATP, which is the primary energy currency of the cell. Oxidation and reduction are complementary reactions that occur simultaneously in the same reaction, resulting in the release of energy. Redox reactions are vital in metabolic pathways, and the electron carriers NAD+ and FAD+ are essential in these reactions. Oxygen is frequently used as a final electron acceptor in redox reactions. Redox reactions can also occur in non-cellular environments, such as photosynthesis, respiration, and combustion. The significance of redox reactions is enormous, and they play an essential role in sustaining life on earth. They help in generating energy, breaking down complex molecules, synthesizing molecules, and many other cellular processes.

To learn more about  Oxidation-reduction :

https://brainly.com/question/13892498

#SPJ11


What is a vapor?
A. A substance that is in the gas phase at a temperature at which it
would normally be a solid or liquid
B. A substance that has a much higher melting point and boiling point than other similar substances
C. A substance that forms a gas, but only at very high temperatures
D. A substance that is always in the solid or liquid phase at room
temperature

Answers

Answer:

C

Explanation:

PHYSICS

a gaseous substance that is below its critical temperature, and can therefore be liquefied by pressure alone.

C. Substance that forms, the gas, but only at very high temperatures.

please answer for brainliest

Using the formula M1V1 = M2V2 , you have a 0.5 M MgSO4 stock solution available. Calculate the volume of the stock solution needed to make 2.0 L of 0.20M MgSO4.

Question 2 options:

4.0 L


0.9 L


0.8 L


0.5 L

Answers

Answer:

0.8 L

Explanation:

The volume of the stock solution needed to make 2.0 L of 0.20M MgSO4 is 0.8 L.

How many moles are 2.96 x 1020 atoms of iron?

Answers

Answer: There are 3019.2 atoms of iron.

Answer:

Explanation:

Iron is a ductile, malleable, silver-white metallic element, scarcely known in a pure condition, but much used in its crude or impure carbon-containing forms for making tools, implements, machinery, etc. Symbol: Fe; atomic weight: 55.847; atomic number: 26; specific gravity 7.86 at 20°C.

1 mol contains [tex]=6.02\times10^{23}[/tex] particles, whether it be atoms, ions, molecules or whatever (Avogadro's number).

So you just divide:

[tex]\frac{2.96\times10^{20}}{6.02\times10^{23}}[/tex] = = 4.9169435215947 × 10^-4

how many moles of CaO will form if 10.0 moles of CO2 are produced

Answers

The balanced chemical equation for the reaction that forms CaO and CO2 is:

CaCO3(s) → CaO(s) + CO2(g)

According to the equation, 1 mole of CaCO3 produces 1 mole of CaO and 1 mole of CO2.

Therefore, if 10.0 moles of CO2 are produced, it means that 10.0 moles of CaO are also produced since the reaction stoichiometry is 1:1.

So the answer is 10.0 moles of CaO.

How many electrons can occupy the following sub-shells: (a) 1s, (b) 3p, (c) 3d, and (d) 6g?

Answers

The maximum number of electrons that can occupy the 1s sub-shell is 2, the 3p sub-shell is 6, the 3d sub-shell is 10, and the 6g sub-shell is 32.

For the 1s sub-shell, due to the Pauli Exclusion Principle, two electrons of opposite spin can exist in the same orbital. This means that there is a maximum of two electrons that can occupy the 1s sub-shell. For the 3p sub-shell, three orbitals exist with a maximum of two electrons each. Since two electrons of opposite spin can occupy each orbital, there is a maximum of six electrons that can occupy the 3p sub-shell. For the 3d sub-shell, five orbitals exist with a maximum of two electrons each. Since two electrons of opposite spin can occupy each orbital, there is a maximum of 10 electrons that can occupy the 3d sub-shell. Finally, for the 6g sub-shell, seven orbitals exist with a maximum of two electrons each. Since two electrons of opposite spin can occupy each orbital, there is a maximum of 32 electrons that can occupy the 6g sub-shell.

To learn more about Electrons ;

https://brainly.com/question/11316046

#SPJ11

How do the number of collisions affect the size of the balloon?

Answers

Answer:

As the number of gas particles increases, the frequency of collisions with the walls of the container must increase. This, in turn, leads to an increase in the pressure of the gas. Flexible containers, such as a balloon, will expand until the pressure of the gas inside the balloon once again balances the pressure of the gas outside.

Explanation:

Determine the empirical formula for a compound that is composed of 0.953 mol Na, 0.322 mol Al, and 1.93 mol F.

Answers

Answer: NaAlF6

Explanation:

1) divide by the smallest number of moles

0.953/.322 =2.96 round to 3 Na

.322/.322 = 1 Al

1.93/.322 =5.99 round to 6 F

2) write in order numbers were give

NaAlF6

Which of the following is the major organic product of the condensation of ammonia or a primary amine with the carbonyl group of an aldehyde or ketone?
Imine

Answers

The major organic product of the condensation of ammonia or a primary amine with the carbonyl group of an aldehyde or ketone is an imine.

A functional group or organic substance with a carbon-nitrogen double bond (C=N) is known as an imine. A hydrogen atom or an organic group may be joined to the nitrogen atom. (R). The carbon atom is connected to two more single bonds. Imines are present in numerous processes and are frequently found in manufactured and naturally occurring chemicals.

The five core atoms for ketimines and aldimines, C2C=NX and C(H)C=NX, respectively, are coplanar. The sp2-hybridization of the mutually double-bonded nitrogen and carbon atoms yields planarity. For nonconjugated imines, the C=N distance is 1.29-1.31, whereas for conjugated imines, it is 1.35. The C-N distances in amines and nitriles, on the other hand, are 1.47 and 1.16, respectively. Slow rotation occurs around the C=N bond. E- and Z-isomers were detected using NMR spectroscopy of aldimines have been detected. Owing to steric effects, the E isomer is favored.

An imine is formed when a primary amine reacts with a carbonyl group (C=O) of an aldehyde or ketone to form a new C-N bond. This reaction is known as a condensation reaction, as it involves the loss of a small molecule (e.g. water) to form the product.

For more such questions on condensation reaction , Visit:

https://brainly.com/question/1361341

#SPJ11

The correct questions is :

What  is the major organic product of the condensation of ammonia or a primary amine with the carbonyl group of an aldehyde or ketone?

2. Hydrogen bromide reacts with propene to form either 1-bromopropane or 2-bromopropane. Explain why
2-bromopropane is the major product.

3. Explain how the reaction with bromine can be used to test for an alkene. Include the mechanism for the reaction between hex-1-ene and bromine in your answer.

a) Describe the process of addition polymerisation.

b) Show the repeating unit of the polymer that is formed from the addition polymerisation of chloroethene monomers. Name and give at least one use for this polymer.

Answers

Answer:

Explanation:

2-bromopropane is the major product because the reaction mechanism involves the formation of the most stable carbocation intermediate. When hydrogen bromide reacts with propene, the hydrogen atom from HBr adds to the carbon atom of the double bond that has fewer hydrogen atoms attached, resulting in the formation of a carbocation intermediate. The intermediate can either form 1-bromopropane or 2-bromopropane depending on the position of the carbocation. The 2-bromopropane is the major product because the secondary carbocation formed in this case is more stable than the primary carbocation formed in the case of 1-bromopropane.

To test for an alkene, bromine water can be used. When an alkene reacts with bromine water, the bromine molecule adds across the double bond, forming a colorless dibromoalkane product. The mechanism for the reaction between hex-1-ene and bromine involves the formation of a cyclic bromonium ion intermediate, followed by the attack of water on the intermediate, resulting in the formation of the dibromoalkane product.

a) Addition polymerization is a process in which unsaturated monomers are joined together to form a polymer. The process involves breaking the double bond of the monomer and joining the monomers together to form a long-chain polymer. The process requires a catalyst to initiate the reaction.

b) The repeating unit of the polymer formed from the addition polymerization of chloroethene monomers is -CH2-CHCl-. This polymer is called polyvinyl chloride (PVC), and it has a wide range of uses, including pipes, electrical cables, and vinyl flooring.

Look at the picture below

Answers

The claim was correct . All elements  have same number of particles in one mole and have different number of particles  in a mole based on atomic number .

What is mole ?

In the International System of Units, the mole (symbol mol) is the unit of substance amount (SI). The amount of substance is a measurement of how many elementary entities of a given substance are present in an object or sample. An elementary entity can be an atom, a molecule, an ion, an ion pair, or a subatomic particle such as an electron, depending on the substance. For example, despite having different volumes and masses, 10 moles of water (a chemical compound) and 10 moles of mercury (a chemical element) contain equal amounts of substance, and the mercury contains exactly one atom for each molecule of water.

to know more about mole , visit ;

brainly.com/question/26416088

#SPJ1

The activation energy Ea for a particular reaction is 50.0 kJ/mol. How much faster is the reaction at 314 K than at 310.0 K? (R = 8.314 J/mol • K)

Answers

In comparison to 310.0 K, the reaction happens 1.28 times faster at 314 K.

A higher K value: what does it mean?

A high K value (higher than 1) denotes an equilibrium with more products than reactants, whereas a low K value (less than 1) denotes an equilibrium with more reactants than products.

The Arrhenius equation, which connects the rate constant (k) to the activation energy (Ea) and temperature (T), can be used to determine how much faster the reaction happens at 314 K than it does at 310.0 K. k = A * exp(-Ea / (R * T))

where T is the temperature in Kelvin, R is the gas constant, and A is the preexponential factor.

For this reaction, we can assume that the pre-exponential component is fixed and that the sole variable is temperature.

exp[(Ea / R) * (1/T1 - 1/T2)] = k2 / k1

where Ea is the activation energy, R is the gas constant, k1 is the rate constant at 310.0 K, and k2 is the rate constant at 314 K.

k2 / k1 = exp[(50.0 kJ/mol / (8.314 J/mol•K)) * (1/310.0 K - 1/314 K)] is the result of substituting the provided numbers.

If we condense this phrase, we get:

k2 / k1 = 1.28

To know more about reaction visit:-

https://brainly.com/question/28270550

#SPJ1

Each of the properties that follow is a characteristics of the carbon atom. in each case, indicate how the property contributes to the role of the carbon atom as the most important atom in biological molecules.
a. the carbon atom has a valence of four.
b. the carbon-carbon bond has a bond energy that is above the energy of photons of light in the visible range(400-700)
c. carbon is one of the lightest elements to form a covalent bond.
d. carbon can form single, double and triple bonds.
e. the carbon atom is a tetrahedral structure.

Answers

Carbon's unique properties such as having a valence of four, the ability to form various types of bonds including double and triple bonds, and its tetrahedral structure.

What are the properties of carbon bonds?

a. The carbon atom's valence of four enables it to form up to four covalent bonds with other atoms, allowing for the formation of diverse organic molecules. This property makes carbon the backbone of many biological molecules, including carbohydrates, lipids, proteins, and nucleic acids.

b. The high bond energy of carbon-carbon bonds makes them stable and resistant to breaking under normal physiological conditions, contributing to the stability of biological molecules. This property allows for the formation of complex macromolecules, such as enzymes and DNA, which are essential to life.

c. Carbon's relatively low atomic weight allows it to form strong covalent bonds without adding significant mass to the molecule. This property is essential for the formation of large and complex biological molecules, which require many carbon atoms to function properly.

d. The ability of carbon to form single, double, and triple bonds allows for the formation of diverse molecular structures, including cyclic structures and branching chains. This property contributes to the diversity of organic molecules found in living organisms, allowing for the creation of molecules with specific functions.

e. The tetrahedral structure of the carbon atom enables it to form strong and stable bonds with other atoms while maintaining a relatively stable geometry. This property is essential for the formation of complex three-dimensional structures in proteins and other biological molecules, allowing them to perform specific functions within cells.

Learn more about carbon bond here: https://brainly.com/question/12156863

#SPJ1

!!!50 points!!!
Problem 1. What masses of 15% and 20% solutions are needed to prepare 200 g of 17% solution?
Problem 2. What masses of 18% and 5% solutions are needed to prepare 300 g of 7% solution?
Problem 3. 200 g of 15% and 350 g of 20% solutions were mixed. Calculate mass percentage of final solution.
Problem 4. 300 g of 15% solution and 35 g of solute were mixed. Calculate mass percentage of final solution.
Problem 5. 400 g of 25% solution and 150 g of water were mixed. Calculate mass percentage of final solution.

Answers

Answer:

See Below.

Explanation:

Problem 1

Let x be the mass of 15% solution needed and y be the mass of 20% solution needed. Then, we have the following system of equations:

x + y = 200 (total mass of solution)

0.15x + 0.20y = 0.17(200) (total amount of solute)

Solving this system of equations gives:

x = 60 g (mass of 15% solution)

y = 140 g (mass of 20% solution)

Therefore, 60 g of 15% solution and 140 g of 20% solution are needed to prepare 200 g of 17% solution.

Problem 2

Let x be the mass of 18% solution needed and y be the mass of 5% solution needed. Then, we have the following system of equations:

x + y = 300 (total mass of solution)

0.18x + 0.05y = 0.07(300) (total amount of solute)

Solving this system of equations gives:

x = 120 g (mass of 18% solution)

y = 180 g (mass of 5% solution)

Therefore, 120 g of 18% solution and 180 g of 5% solution are needed to prepare 300 g of 7% solution.

Problem 3

The total mass of the final solution is

200 g + 350 g = 550 g

The total amount of solute in the final solution is:

0.15(200 g) + 0.20(350 g) = 95 g + 70 g = 165 g

Therefore, the mass percentage of the final solution is:

(mass of solute / total mass of solution) x 100% = (165 g / 550 g) x 100% = 30%

Therefore, the mass percentage of the final solution is 30%.

Problem 4

The total mass of the final solution is

300 g + 35 g = 335 g

The total amount of solute in the final solution is:

0.15(300 g) + 35 g = 75 g + 35 g = 110 g

Therefore, the mass percentage of the final solution is:

(mass of solute / total mass of solution) x 100% = (110 g / 335 g) x 100% = 32.8%

Therefore, the mass percentage of the final solution is 32.8%.

Problem 5

The total mass of the final solution is

400 g + 150 g = 550 g

The total amount of solute in the final solution is

0.25(400 g) = 100 g

Therefore, the mass percentage of the final solution is

(mass of solute / total mass of solution) x 100% = (100 g / 550 g) x 100% = 18.2%

Therefore, the mass percentage of the final solution is 18.2%.

How many moles are in 3.19 × 1016 molecules of NOs?

Answers

There are approximately 0.005302 moles of NOs in 3.19 × 10^16 molecules.

What is moles ?

Mole is an SI unit used to measure the amount of any substance.

To calculate the number of moles of NOs in 3.19 × 10^16 molecules, we need to use Avogadro's number, which is 6.022 × 10^23 molecules per mole.

First, we need to convert the number of molecules to moles using the formula:

moles = molecules / Avogadro's number

moles of NOs = 3.19 × 10^16 molecules / 6.022 × 10^23 molecules per mole

moles of NOs = 0.005302 moles (rounded to 4 significant figures)

Therefore, there are approximately 0.005302 moles of NOs in 3.19 × 10^16 molecules.

Learn more about moles here : brainly.com/question/29367909

#SPJ1

The number of moles present in 3.19×10¹⁶ molecules of nitrogen dioxide, NO₂ is 5.30×10⁻⁸ mole

How do i determine the number of moles present?

The number of moles present in 3.19×10¹⁶ molecules of NO₂ can be obtained by using the Avogadro's hypothesis as illustrated below:

Number of molecules = 3.19×10¹⁶ moleculesNumber of mole of NO₂ =?

From Avogadro's hypothesis,

6.022×10²³ molecules = 1 mole of NO₂

Therefore,

3.19×10¹⁶ molecules = 3.19×10¹⁶  / 6.022×10²³

3.19×10¹⁶ molecules = 5.30×10⁻⁸ mole of NO₂

Thus, we can conclude that the number of mole is 5.30×10⁻⁸ mole

Learn more about mole:

https://brainly.com/question/13314627

#SPJ1

Can some please help with the picture below

Answers

The completed table of maximum moles of water, limiting reactant and excess reactant is as follows:

Q: 6 moles, O₂, 1 mole H₂

R: 6 moles, O₂, 2 moles H₂

S: 5 moles, none, none

T: 5 moles, H₂, 2.5 moles O₂

U: 8 moles, H₂, 2 moles O₂

What is the mole ratio of the reaction of hydrogen and oxygen to form water?

The mole ratio of the reaction of hydrogen and oxygen to form water is obtained from the equation of the reaction.

The equation of the reaction is given below:

2 H₂ + O₂ --> 2 H₂O

The mole ratio of hydrogen to oxygen is 2:1 in both the water molecule and the reactants, hydrogen gas (H2) and oxygen gas, as can be seen from the balanced equation (O2). 

Learn more about mole ratio at: https://brainly.com/question/30632038

#SPJ1

i need help with the question below

Answers

Technician A says that improper handling of a windshield wiper can lead to a broken windshield. Technician B says that dishwashing detergent works well as washer fluid. Who is correct?Select one:A.Technician AB.Technician BC.Both A and BD.Neither A nor B

2.75g NaCL is present
in 650g of Water. Is the solution saturated or unsaturated?
(Solubility of wäter is 0.33%6)

Answers

Answer:

To determine if the solution is saturated or unsaturated, we need to compare the amount of NaCl in the solution to its solubility in water at the given temperature.

The solubility of NaCl in water at room temperature (25°C) is approximately 36 grams per 100 grams of water, or 0.36 g/g. This means that at 25°C, water can dissolve up to 0.36 grams of NaCl per gram of water.

In this case, we have 2.75 grams of NaCl dissolved in 650 grams of water. To find the concentration of NaCl in the solution, we divide the mass of NaCl by the total mass of the solution:

concentration of NaCl = mass of NaCl / total mass of solution

concentration of NaCl = 2.75 g / (2.75 g + 650 g)

concentration of NaCl = 0.0042 g/g

Comparing the concentration of NaCl in the solution to its solubility in water at 25°C, we see that:

0.0042 g/g < 0.36 g/g

Since the concentration of NaCl in the solution is less than its solubility in water, the solution is unsaturated.

Explanation:

Menthol is composed of C, H, and O. A 0.1005g sample of menthol is combusted, producing 0.2829g of CO2 and 0.1159g H2O. What is the empirical and molecular formula for menthol?

Answers

The empirical formula, CH2O9(menthol) is multiplied by 5 to get the molecular formula, C10H20O.The empirical and molecular formula for menthol are CH2O and C10H20O, respectively.

The molecular formula for menthol is C5H10O.

This can be determined by dividing the molar mass of the empirical formula (156.26 g/mol) by the molar mass of CO2 (44.01 g/mol). This gives a ratio of 3.55, which is equal to the ratio of C atoms in the empirical formula, C10H20O.

Therefore, the molecular formula is C5H10O.
Given:

Menthol is composed of C, H, and O0.1005g sample of menthol is combusted and produces0.2829g of CO2 0.1159g H2O

1. Find: Empirical and molecular formula for menthol.

Let's first calculate the number of moles of CO2 produced. The balanced equation for combustion of menthol is:

C10H20O(s) + 12O2(g) → 10CO2(g) + 10H2O(l)

From the above equation, we can see that for 10 moles of CO2 produced 1 mole of menthol is required.

2. By taking the number of moles of CO2 produced, we can calculate the number of moles of menthol burned.

Moles of CO2 = 0.2829g / 44.01g/mol= 0.00643 mol

C10H20O(s) + 12O2(g) → 10CO2(g) + 10H2O(l)

From the balanced equation,1 mole of C10H20O requires 10 moles of CO2

Moles of C10H20O burned = 10 * 0.00643= 0.0643 mol

Next, we can calculate the number of moles of H2O produced.

Moles of H2O = 0.1159g / 18.015g/mol= 0.00643 mol

C10H20O(s) + 12O2(g) → 10CO2(g) + 10H2O(l)

From the balanced equation,1 mole of C10H20O requires 10 moles of H2O

Moles of C10H20O burned = 10 * 0.00643= 0.0643 mol

3. Now we can calculate the empirical formula of menthol. The empirical formula can be calculated as follows:

Empirical formula = CH2O (Divide all moles by smallest moles) The molecular weight of CH2O = 30 g/mol

The empirical formula mass of the compound is:

mass = (12.011 + 2*1.008 + 15.999) = 30.026

Empirical formula mass of CH2O is 30.026g/mol, and the given sample weighs 0.1005 g.
The number of empirical formula units in the sample is 0.1005 g / 30.026 g/mol = 0.003348Units.

Empirical formula = CH2OThe empirical formula weight of menthol is CH2O, which is equal to 30.026g/mol.

4. To find the molecular formula, we need to know the molecular weight of the menthol. We can calculate it as follows:

Molecular formula mass = Empirical formula mass x n

Where n = integer Molecular formula mass of menthol is 156 g/mol, and the empirical formula mass is 30.026 g/mol.

So, n = 156 g/mol ÷ 30.026 g/mol = 5.192

Thus the empirical formula, CH2O is multiplied by 5 to get the molecular formula, C10H20O.The empirical and molecular formula for menthol are CH2O and C10H20O, respectively.

For more such questions on empirical formula , Visit:

https://brainly.com/question/1603500

#SPJ11

1. Choose the atom with the smaller atomic size.

Select one:

a. Nitrogen
b. Bismuth


2. Choose the atom with the smaller atomic size.

Select one:

a. Arsenic
b. Bromine

Answers

Its atomic radius increases form top to bottom inside a group, then decreases from left and right across a period. As a result, francium is indeed the largest element while helium is the smallest.

Which atomic size has the smaller diameter?

Atomic radii inside the periodic table decrease across a row form left to right and increase across a column from top to bottom. Due to these two patterns, the periodic table's lower left and upper right corners, respectively, contain the largest and smallest atoms.

Which atom is the smallest?

The atomic radius grows form top to bottom inside a group and decreases form left to right during a period, as seen in the images below. As a result, francium is indeed the largest element while helium is the smallest.

To know more about francium visit:
https://brainly.com/question/28617076

#SPJ1

a. The atom with the smaller atomic size is: Nitrogen

a. The atom with the smaller atomic size is: Arsenic.

How is atomic size of elements calculated?

Atomic size, also known as atomic radius, is the distance between the nucleus of an atom and its outermost electrons. It is typically measured in picometers (pm) or angstroms (Å). The atomic size of an element can be calculated by finding the distance between the nucleus and the outermost electron shell of an atom of that element. This distance can be determined using various methods, including X-ray diffraction and spectroscopy. The atomic size of elements generally decreases from left to right across a period and increases from top to bottom down a group in the periodic table.

To know more about spectroscopy, visit:

https://brainly.com/question/28523860

#SPJ1

An emission spectrum has a line in the blue region. How does this occur in the atom?

A. An electron ABSORBS a photon as it goes from a HIGHER TO LOWER energy level.

B. An electron EMITS a photon as it goes from a HIGHER TO LOWER energy level.

C. An electron EMITS a photon as it goes from a LOWER TO HIGHER energy level.

D. An electron ABSORBS a photon as it goes from a LOWER TO HIGHER energy level.​​

Answers

The correct response is B. An electron EMITS a photon as it goes from a HIGHER TO LOWER energy level.

What is electron?

A subatomic particle with a negative electric charge is called an electron. Together with protons and neutrons, it is one of the fundamental particles that make up an atom.

When an atom is excited, its electrons have the ability to transition from one energy level to another. These stimulated electrons will eventually revert to their initial lower energy levels since they are unstable. They do this by releasing energy in the form of particular wavelength photons. Each element has a distinct set of energy levels, which leads to the emission of photons at a certain wavelength and the formation of a distinct emission spectrum.

In this instance, the existence of a line in the emission spectrum's blue section shows that an electron has released a photon with a certain wavelength that corresponds to the region's blue color. A photon with an energy equal to the difference between the two levels is released when an excited electron returns from a higher energy level to a lower energy level.

To know more about electron, visit:

https://brainly.com/question/1255220

#SPJ1

Other Questions
what did roy learn in roy secret in fahrenheit 451 how does the chase end for the tv audience? how is this accomplished, and what more does it reveal about the police? what explanation do the men give montag for the way the chase ends? Primarily, consumers can identify and affiliate with reference groups, like social influencers, to create, enhance, or maintain theira. self-esteem.b. economic status.c. family values. d. social status. e. self-image. In what ways is the economy of the UAE not typical of most countries around the world? What was the purpose of the italicized part of the essay, beginning with "Of taxing our absentees..." in "A Modest Proposal" by Jonathan Swift? a _______ is used to measure membrane potential and this value is ________ inside of almost all animal cells. How do you work this out?Anyone help please . How much water can be heated 20.0 C with 1,000.0 J of heat energy? Why might we need the Government to step in on Big Businesses? Affirmative action, which has been a major source of litigation and remains controversial, is typically challenged as presenting problems based on the concept of . . Some characteristics of the neuronal presynaptic axon include a swollen end terminal and a large quantity of_________ vesicles which are packed with ______. Sometimes parents and grandparents like to recount how difficult life was when they were kids, such as having to walk 10+ miles to school (in the snow, uphill both ways). A random sample of 180 teenagers were selected and 40% had heard stories from their parents or grandparents about how difficult life was when they were kids. Do these data provide convincing evidence at an = 0.05 significance level that the proportion of all teenagers who have heard stories from their parents or grandparents about how difficult life was when they were kids differs from 0.50? State: Plan: Do: Conclude: Redox reactions refer to a pair of reactions in which a particular oxidation is coupled to a corresponding reduction. Although neither can occur independently of the other, it can be helpful to write each oxidation or reduction as a half reaction to help us understand and calculate the flow of energy. In this exercise, sort each listed half reaction as either an oxidation or a reduction. Please Help. Redox reactions refer to a pair of reactions in which a particular oxidation is coupled to a corresponding reduction. Although neither can occur independently of the other, it can be helpful to write each oxidation or reduction as a half reaction to help us understand and calculate the flow of energy. In this exercise, sort each listed half reaction as either an oxidation or a reduction. Half reactions (8 items) (Drag and drop into the appropriate area below) No more items Classification Oxidation Reduction HS--+ So + 2H+ + e- NADH + H+-+ NAD+ + 2H+ + 2e-1 : Fe3+ + e- Fe2 acetaldehyde + 20" + 2 H+ H2 2H+ + 2e- o2 + 2H+ + 2e- H2O FAD + 2H+ + 2e-FADH2 Cao Ca+2 + 2e : | 1 ethanol stan is riding in a car with his friend brenda. brenda suddenly begins swerving across the lanes on the road and driving fast. stan begins to feel scared and nervous. his heart rate increases and he begins to sweat. in this example, what is stan's stress reaction? name the threee principals ways in which a load may be applied to a specimen enter words in alphabetic order debby diver is at the end of the diving board which is supported by springs at a and b. in the position shown, the board is horizontal. given: A triangle has a base that measures 6.4 feet. Its height measures 5 feet. How many square feet is the area of the triangle? The only exception to the even/odd rule used to determine the direction of rotation in a gear drive is for __________ gear drives.multiplecompoundreductionidler Understanding and Interpreting Confidence Intervals a Suppose that a student is working on a statistics project using data on systolic blood pressure collected from a random sample of 100 students from her college. She finds a 95% confidence interval for the mean systolic blood pressure to be (108.6, 120.3) mm Hg. Which statement below incorrectly conveys the meaning of the confidence interval? She is 95% confident that the mean systolic blood pressure for students in the sample is between 108.6 and 120.3 mm Hg. O She is 95% confident that mean systolic blood pressure for students is between 108.6 and 120.3 mm Hg. Hint Assistance Used Use the definition of a 95% confidence interval. 8. Points P, Q, whose abscissae are 2 and 2+h, are taken on the curve y = 2x^2+1. Find the gradient of the chord PQ. To what value does this gradient approach as h decreases towards the value zero?