Answer:
aluminum
no aluminum is left over
Explanation:
the next answers for step 7 are 0.019, 0.0093, aluminum
Answer:
Aluminum because no aluminum is left over
Explanation:
what is the correct answer !
Answer:
Hi there, The correct answer is, OPT A
Explanation:
Please mark as the brainliest
Visible light is a part of what spectrum
Answer:
Visible Spectrum/Electromagnetic spectrum
Explanation:
The visible spectrum is the portion of the electromagnetic spectrum that is visible to the human eye.
I can hit a metal with a hammer without the metal shattering because of its
Malleability
Ductility
Conductivity
Lustrousness
Answer: Malleability
Explanation: cuz ... its right ... lol
Radio waves are used to transmit information on various channels. What is the wavelength of a radio wave having the frequency of 5.40 × 1010 Hz?
1. Analyze the Problem
ν = and c = Unknown: λ =
You know that because radio waves are part of the electromagnetic spectrum, their speed, frequency, and wavelength are related by the formula c = λν.
Answer:
5.56×10¯³ m
Explanation:
From the question given above, the following data were obtained:
Frequency (v) = 5.4×10¹⁰ Hz
Wavelength (λ) =?
The velocity of electromagnetic wave, frequency and wavelength are related according to the equation:
Velocity (c) = wavelength (λ) × frequency (v)
c = λv
With the above formula, the wavelength of the radio wave can be obtained as follow:
Frequency (v) = 5.4×10¹⁰ Hz
Wavelength (λ) =?
Velocity (c) = 3×10⁸ m/s
c = λv
3×10⁸ = λ × 5.4×10¹⁰
Divide both side by 5.4×10¹⁰
λ = 3×10⁸ / 5.4×10¹⁰
λ = 5.56×10¯³ m
Thus, wavelength of the radio wave is 5.56×10¯³ m
tps://hosted 149....
Welcome
(2/1) Double -replacement chemical reactions (Lesson for 2/1) ☆ C
Cools Add-ons Help Accessibility Last edit was 4 minutes ago
Arial
B I VA
5 15 E
11
+
ext
Q26. Aqueous sodium oxalate (C204)2- and aqueous lead (II) nitrate react to product solid
lead (II) oxalate and aqueous sodium nitrate.
3.
I need Balanced chemical equations
Na₂C₂O₄(aq) + Pb(NO₃)₂⇒PbC₂O₄(s) + 2NaNO₃(aq)
Further explanationGiven
Word equation
Required
Balanced equation
Solution
Convert to skeleton equation
Na₂C₂O₄(aq) + Pb(NO₃)₂⇒PbC₂O₄(s) + NaNO₃(aq)
Balanced equation
Give a coefficient
Na₂C₂O₄(aq) + aPb(NO₃)₂⇒bPbC₂O₄(s) + cNaNO₃(aq)
Make an equation
C, left = 2, right =2b⇒2b=2⇒b=1
Na, left = 2, right = c⇒c=2
O, left = 4+6a, right = 4b+3c⇒4+6a=4b+3c⇒4+6a=4.1+3.2⇒6a=6⇒a=1
The equation becomes :
Na₂C₂O₄(aq) + Pb(NO₃)₂⇒PbC₂O₄(s) + 2NaNO₃(aq)
How many moles of H₂O can be produced when 5.5 moles of CO₂ is produced? C₂H₄ + 3 O₂ --> 2 CO₂ + 2 H₂O
Answer:
5.5 mol H2O
Explanation:
Given over what you need and then mole ratio of coefficients in the balanced equation then cross multiply and do PEMDAS for that, and then you got your answer :) hope this helped.
A 2.5 L container holds a sample of hydrogen gas at 291 K and 180 kPa.
If the pressure increases to 350 kPa and the volume remains constant, what will the new temperature be?
Round your answer to one decimal place.
Answer:
The new temperature will be 565.83 K.
Explanation:
Gay Lussac's law establishes the relationship between the temperature and the pressure of a gas when the volume is constant. This law says that the pressure of the gas is directly proportional to its temperature. This means that if the temperature increases, the pressure will increase; or if the temperature decreases, the pressure will decrease.
In other words, Gay-Lussac's law states that when a gas undergoes a constant volume transformation, the ratio of the pressure exerted by the gas temperature remains constant:
[tex]\frac{P}{T} =k[/tex]
When an ideal gas goes from a state 1 to a state 2, it is true:
[tex]\frac{P1}{T1} =\frac{P2}{T2}[/tex]
In this case:
P1= 180 kPaT1= 291 KP2= 350 kPaT2= ?Replacing:
[tex]\frac{180 kPa}{291 K} =\frac{350 kPa}{T2}[/tex]
Solving:
[tex]T2=350 kPa*\frac{291 K}{180 kPa}[/tex]
T2= 565.83 K
The new temperature will be 565.83 K.
Calculate the mass of 4 moles of CuCl2.
Was Dalton's Atomic Theory correct or incorrect and why?
Answer:
The indivisibility of an atom was proved wrong: an atom can be further subdivided into protons, neutrons and electrons. However an atom is the smallest particle that takes part in chemical reactions. ... According to Dalton, atoms of different elements combine in simple whole number ratios to form compounds.
Some items, such as rubber, float on the water, while some items, such as gold, sink in
the water. If an item floats is it more or less dense than the water?
Answer:
If an item is less dense, it floats on the water.
Explanation:
We know this since the more dense something it usually is heavier than if it was less dense. Which ways it down resulting to it sinking.
what’s the correct answer !!
Answer:
From my side the correct option is "A"
Explanation: Reasons for its correction are ,
1) Highly reactive: Nanoparticles are therefore extremely unstable and easily change themselves or react with active substances to reach a relatively stable state in some cases. This causes desired changes or undesired changes to nanoparticles and thus makes them exhibit a high reactivity and a poor stability.
2)Small size: Nanotechnology can provide rapid and sensitive detection of cancer-related molecules, enabling scientists to detect molecular changes even when they occur only in a small percentage of cells. Nanotechnology also has the potential to generate entirely novel and highly effective therapeutic agents.
What is the chemical formula for sodium sulfate
Answer:
Na2So4
Explanation:
Na is group 1, so has a charge of 1+
Sulphate’s formula is SO4 2-,
because sulphate has double the charge of Na, you need two Na’s to make it equal.
Therefore it’s Na2SO4
What is the name of the ionic compound with the formula:
AlF3
Answer:
potassium chloride.
What is the charge of an electron?
why are cells small?
Answer:
you know what i really dont know but imagine if they were huge
Explanation:
Describe two differences between transition elements and alkali metals?
Explanation:
On the periodic table, we can find a wide range of elements from alkali metals, to the alkali earth metals, transition metals and through to the noble gases.
The alkali metals are found on the first group in the periodic table and they are group of metals. Also, the transition elements are also a group of metals.
Transition elements are known to have variable oxidation states whereas, alkali metals have an oxidation state of +1. Transition metals belong the d-block on the periodic table whereas alkali metals are found in the first group on the periodic table.16.
As the elements in Group 17 on the Periodic Table
are considered from top to bottom, what happens
to the atomic radius and the metallic character of
each successive element?
A. The atomic radius and the metallic character
Aboth increase.
B. The atomic radius increases and the metallic
character decreases.
C. The atomic radius decreases and the metallic
character increases.
D. The atomic radius and the metallic character
both decrease.
Answer:
Explanation:
When going from top to bottom in any group of the periodic table, the atomic radius always tends to increase
Mendeleev's proposal of periodic table was based on:
The proposal of the periodic table was based upon properties that appeared with some regularity by laying out the elements from lightest to heaviest.
[hope this is helpful!:))]
Need help balancing equations please.
Answer:
A, 4,3,2
B, 1,1,2
C, 1,1,1,2
PLEASE HURRY
Which of the following is a subsurface event that takes place during the rock cycle?
Deposition
Erosion
Weathering
Plate tectonics
Answer:
Option D, Plate Tectonics
In the rock cycle, surface events takes place at the surface of earth. Thus,
weathering and erosion are surface events, while the subsurface events he take place in the deeper section of the earth . Examples of sub surface events are plate tectonics and mountain building or anything that takes place in the inner core of earth.
Explanation:
Answer:
Option D, Plate Tectonics
In the rock cycle, surface events takes place at the surface of earth. Thus,
weathering and erosion are surface events, while the subsurface events he take place in the deeper section of the earth . Examples of sub surface events are plate tectonics and mountain building or anything that takes place in the inner core of earth.
Explanation:
Option D, Plate Tectonics
In the rock cycle, surface events takes place at the surface of earth. Thus,
weathering and erosion are surface events, while the subsurface events he take place in the deeper section of the earth . Examples of sub surface events are plate tectonics and mountain building or anything that takes place in the inner core of earth.
Help me with this pls
Which equation is NOT balanced?
A. 2H2 + O2® 2H2O
B. H2 + H2 + O2® H2O + H2O
C. 2H2 + O2® H2O
D. 4H2 + 2O2® 4H2O
Answer:
C
Explanation
On the reactants side there is 4 Hydrogen atoms in total and two oxygen atoms on the left however on the right there is two hydrogen atoms and one oxygen atom. Leaving this equation unbalanced
The equation that is NOT balanced is [tex]\rm 2H_2 + O_2\rightarrow H_2O[/tex]. The correct answer is option C.
In a balanced chemical equation, the number of atoms of each element on the reactant side must be equal to the number of atoms of each element on the product side.
In equation A, there are 4 hydrogen atoms and 2 oxygen atoms on both the reactant and product sides, so it is balanced.In equation B, there are 4 hydrogen atoms and 2 oxygen atoms on both the reactant and product sides, so it is balanced.In equation C, there are 4 hydrogen atoms and 2 oxygen atoms on the reactant side, but only 2 hydrogen atoms and 1 oxygen atoms on the product side. Therefore, it is not balanced.In equation D, there are 8 hydrogen atoms and 4 oxygen atoms on both the reactant and product sides, so it is balanced.In conclusion, equation C. [tex]\rm 2H_2 + O_2\rightarrow H_2O[/tex] is the one that is NOT balanced. It has an unequal number of oxygen atoms on the reactant and product sides.
Learn more about Balanced chemical equation here:
https://brainly.com/question/29130807
#SPJ6
Can anyone explain and answer?
Which physical change are both exothermic
A)condensation and evaporation
B)evaporation and melting
C)freezing and condensation
D)melting and freezing
Answer:
I would say C.)
Explanation:
Freezing and condensation are both ways that heat is let out from an object.
if you had a block square that weighed 5.00 grams what would be the length of each side
Answer:
[tex]l = 0.793[/tex] cm
Explanation:
Let us assume the density of block square [tex]10[/tex] g/cm³
As we know
Volume = [tex]\frac{Mass}{Density}[/tex]
Thus Volume of this block is equal to [tex]\frac{5}{10} = 0.5[/tex]
As we know volume of square block of side of length "l" is equal to [tex]l^3[/tex]
[tex]l^3 = 0.5[/tex]
[tex]l = 0.793[/tex] cm
PLeas hurry
Which of the following matches a human action with its impact?
Construction of dam : Scarcity of water for animals
Use of fertilizers : Increase in the population of aquatic animals
Decrease in honeybee population : Increase in plant population
Construction of roads : Improvement in quality of water in local lakes
Answer:
construction aka A
Explanation:
got 100
8. What is the molar mass of carbon dioxide, Co2(g)? How many grams of carbon
dioxide would there be for 3 moles? Explain.
Answer:
CO2 molar mass=44.01g
3 moles CO2 = 132.03g
Explanation:
CO2 molar mass = 12.01+2(16.00)=44.01g
3 moles CO2 * (44.01 g CO2)/(1 mol CO2)=132.03g
(Answer would be different depending on the number of decimals)
Which of the following elements is used by your body? A) aluminum B) helium C) calcium D) all of the above
A 5.0 g sample of metal was heated to a temperature of 100.0 °C then placed into a calorimeter containing 35 mL of water at 20.0°C.
The final temperature was 26.5°C What is the specific heat capacity of the metal?
The specific heat capacity of the metal : c = 2.59 J/g °C
Further explanationGiven
5 g sample
35 ml water = 35 g
Required
The specific heat capacity of the metal
Solution
Heat can be formulated :
Q = m.c.Δt
Q in = Q out
Q absorbed = Q released
Q water = Q metal
35 g x 4.184 J/g °C x (26.5-20)= 5 x c x (100-26.5)
951.86 J = 367.5 x c
c = 2.59 J/g °C
when an ecosystem changes the results are (positive negative both or none) explain
This is science!
Answer:
C. Both
Explanation:
When an Ecosystem changes the effects can be both positive and negative. It all really just depends on what the change is.
Which three elements are combined in lithium sulfate ?
Answer:
jsidndnxjxixdjdbsjsjdidnsjdjdidndjd