Problem 1 (3 pts). The nearest neighbor method is used with the following labeled training data in a two class, two feature problem. Show clearly the decision boundaries obtained. Indicate all break points and slopes correctly Class1={(0,0)^T,(0,1)^T}. Class2={(1,0)^T,(0,0.5)^T}

Answers

Answer 1

Problem 1 (3 pts). The nearest neighbor method is used with the following labeled training data in a two class, two feature problem. Show clearly the decision boundaries obtained. Indicate all break points and slopes correctly Class1={(0,0)^T,(0,1)^T}. Class2={(1,0)^T,(0,0.5)^T}.

The decision boundary is the line that separates the two classes. When it comes to the nearest neighbour method, the boundary of a class is determined by the closest data point in the other class.What is the nearest neighbour method?The nearest neighbour method (NNM) is a type of lazy learning method in which the data is stored and the computation is deferred until the classification phase.

The goal of the nearest neighbor technique is to use the pattern of the closest data point to classify a new sample. It's also one of the simplest non-parametric classification methods, and it's based on the assumption that the feature spaces used by each class are continuous regions.For Class 1, there are two labeled training data points: (0, 0)T and (0, 1)T. Similarly, for Class 2, there are two labeled training data points: (1, 0)T and (0, 0.5)T.

To generate decision boundaries, follow the steps below:Step 1: Plot the given labeled training data. They are shown in the figure below. Step 2: Label the data points according to their class: Class 1 and Class 2.Step 3: Now, we need to find the nearest neighbors. Find the nearest neighbor for each of the labeled training data points from the opposite class. The distances are calculated as follows:For the Class 1 data points, the nearest neighbor is Class 2's (1, 0)T data point.

For the Class 2 data points, the nearest neighbour is Class 1's (0, 1)T data point.Step 4: Connect the nearest neighbour's labeled training data points with a line. These are the decision boundaries. The red line represents the decision boundary between Class 1 and Class 2. The green line represents the decision boundary between Class 2 and Class 1. The slopes of the decision boundaries are -1 for the red line and 1 for the green line. These slopes are the result of the negative reciprocal of the nearest neighbour's slope. The break point for the red line is 0.5, while the break point for the green line is 0. A break point is the point at which the decision boundary intersects the y-axis.

Learn more about nearest neighbor method:

https://brainly.com/question/29457878

#SPJ11


Related Questions

One number is 13 less than another number. Let x represent the greater number. What is the sum of these two numbers?

Answers

Answer:

2x - 13

Step-by-step explanation:

If x represents the greater number, then the other number is x - 13. The sum of these two numbers is:

x + (x - 13) = 2x - 13

-. If f(x) = x² + 3x-2, find f(x) when x = -2

Answers

Answer:

-4

Step-by-step explanation:

substitute -2 into the formula and solve

[tex]f(x)=(-2)^2+3(-2)-2\\f(x)=4+(-6)-2\\\boxed{f(x)=-4}[/tex]

The 1948 and 2018 temperatures at 197 random locations across the globe were compared and the mean difference for the number of days above 90 degrees was found to be 2.9 days with a standard deviation of 17.2 days. The difference in days at each location was found by subtracting 1948 days above 90 degrees from 2018 days above 90 degrees.
What is the lower limit of a 90% confidence interval for the average difference in number of days the temperature was above 90 degrees between 1948 and 2018?
What is the upper limit of a 90% confidence interval for the average difference in number of days the temperature was above 90 degrees between 1948 and 2018?
What is the margin of error for the 90% confidence interval?
Does the 90% confidence interval provide evidence that number of 90 degree days increased globally comparing 1948 to 2018?
Does the 99% confidence interval provide evidence that number of 90 degree days increased globally comparing 1948 to 2018?
If the mean difference and standard deviation stays relatively constant would decreasing the degrees of freedom make it easier or harder to conclude that there are more days above 90 degrees in 2018 versus 1948 globally.
If the mean difference and standard deviation stays relatively constant does lowering the confidence level make it easier or harder to conclude that there are more days above 90 degrees in 2018 versus 1948 globally.

Answers


The lower limit of a 90% confidence interval for the average difference in the number of days the temperature was above 90 degrees between 1948 and 2018 is -22.8 days and the upper limit is 28.6 days.

The margin of error for the 90% confidence interval is 25.4 days.

The 90% confidence interval does provide evidence that the number of 90-degree days increased globally comparing 1948 to 2018.

The 99% confidence interval also provides evidence that the number of 90-degree days increased globally comparing 1948 to 2018.

If the mean difference and standard deviation stay relatively constant, decreasing the degrees of freedom would make it harder to conclude that there are more days above 90 degrees in 2018 versus 1948 globally.

Lowering the confidence level would also make it harder to conclude that there are more days above 90 degrees in 2018 versus 1948 globally.

To learn more about “standard deviation” refer to the https://brainly.com/question/475676

#SPJ11

suppose you start at the origin, move along the x-axis a distance of 7 units in the positive direction, and then move downward a distance of 6 units. what are the coordinates of your position? (x, y, z)

Answers

The coordinates of your position If we start at the origin, we are moving only along the x-axis  of  a distance of 7 units in positive direction and then only in the negative y-axis direction and  z-coordinate is zero are (7,-6,0).

The origin is the point in space that has a position of (0, 0, 0), which represents the point where the x, y, and z axes intersect.

The first step is to move 7 units in the positive x direction. The positive x direction is the direction in which x values increase. Therefore, we move to the right along the x-axis to the point (7, 0). This means that we have moved 7 units along the x-axis, and our position is now (7, 0, 0).

The second step is to move downward a distance of 6 units. Since we are not moving in the x direction, we are only changing our position along the y-axis. Moving downward in the y direction means decreasing our y-coordinate. Therefore, we move 6 units downward from our current position to the point (7, -6, 0).

Therefore, the coordinates of our position are (7, -6, 0)

To practice more question about 'co-ordinates':

https://brainly.com/question/17206319

#SPJ11

g a random sample of 100 automobile owners in the state of alabama shows that an automobile is driven on average 23,500 miles per year with a standard deviation of 3900 miles. assume the distribution of measurements to be approximately normal. a) construct a 99% confidence interval for the average number of miles an automobile is driven annually in alabama.

Answers

We can be 99% confident that the average number of miles an automobile is driven annually in Alabama is between 21,342.6 and 24,637.4 miles



To answer this question, we need to use the following formula for a confidence interval for the mean: CI = (μ - z*(σ/√n), μ + z*(σ/√n)), Where μ is the population mean, z is the z-score for the given confidence level, σ is the population standard deviation, and n is the sample size. Using the given information, we can calculate the confidence interval for the mean:CI = (23500 - 2.575*(3900/√100), 23500 + 2.575*(3900/√100)), CI = (21342.6, 24637.4)


To summarize, we used the formula for a confidence interval for the mean and the given information to calculate the confidence interval for the average number of miles an automobile is driven annually in Alabama. This confidence interval is (21342.6, 24637.4), which means we can be 99% confident that the average number of miles an automobile is driven annually in Alabama is between 21,342.6 and 24,637.4 miles.

Read more about Statistics at

https://brainly.com/question/30218856

#SPJ11

The ratio between two supplementary angle is 13:7. What are the measures of the angles?

Answers

Answer: The two angles are 117 degrees and 63 degrees.

Step-by-step explanation:

Supplementary angles are two angles whose sum is 180 degrees. Let the two angles be 13x and 7x, where x is a constant of proportionality.

We know that the sum of the angles is 180 degrees, so:

13x + 7x = 180

Combining like terms, we get:

20x = 180

Dividing both sides by 20, we get:

x = 9

So the measures of the angles are:

13x = 13(9) = 117 degrees

7x = 7(9) = 63 degrees

Therefore, the two angles are 117 degrees and 63 degrees.

What is the answer I keep getting 32

Answers

Answer:

2 9/14

Step-by-step explanation:

Calculate the amount of interest on $4,000. 00 for 4 years, compounding daily at 4. 5 % APR. From the Monthly Interest Table use $1. 197204 in interest for each $1. 00 invested

Answers

The amount of interest earned on $4,000.00 for 4 years, compounding daily at 4.5% APR, is $1,064.08.

To calculate the amount of interest on $4,000.00 for 4 years, compounding daily at 4.5% APR, we can use the formula for compound interest:

A = P(1 + r/n)^(nt)

where A is the final amount, P is the principal, r is the annual interest rate as a decimal, n is the number of times the interest is compounded per year, and t is the time in years.

In this case, we have P = $4,000.00, r = 0.045, n = 365 (since interest is compounded daily), and t = 4. Plugging these values into the formula, we get:

A = $4,000.00(1 + 0.045/365)^(365*4)

A = $4,000.00(1.0001234)^1460

A = $4,889.68

The final amount is $4,889.68, which means that the interest earned is:

Interest = $4,889.68 - $4,000.00 = $889.68

We are given that the monthly interest table shows that $1.197204 in interest is earned for each $1.00 invested. Therefore, to find the interest earned on $4,000.00, we can multiply the interest earned by the factor:

$1.197204 / $1.00 = 1.197204

Interest earned = $889.68 x 1.197204 = $1,064.08

To learn more about interest click on,

https://brainly.com/question/28895435

#SPJ4

Find the particular solution of the first-order linear differential equation for x > 0 that satisfies the initial condition. Differential Equation Initial Condition y' + y tan x = sec X + 9 cos x y(0) = 9 y = sin x + 9x cos x +9
Previous question

Answers

Answer: Differential Equation Initial Condition y' + y tan x = sec X + 9 cos x y(0) ... linear differential equation for x > 0 that satisfies the initial condition.

Step-by-step explanation:

A student takes a multiple-choice test that has 10 questions. Each question has four choices. The student guesses randomly at each answer. Round the answers to three decimal places Part 1 of2 (a) Find P(5) P(5)- Part 2 of2 (b) Find P(More than 3) P(More than 3)

Answers

A student attempts a 10-question multiple-choice test where each question presents four options, and the student makes random guesses for each answer. So the probability of (a) P(5)= 0.058 and (b) P(More than 3)= 0.093.

Part 1: Calculation of probability of getting 5 questions correct

(a) P(5)The formula used to find the probability of getting a certain number of questions correct is:

P(k) = (nCk)pk(q(n−k))

Where, n = total number of questions

(10)k = number of questions that are answered correctly

p = probability of getting any question right = 1/4

q = probability of getting any question wrong = 3/4

P(5) = P(k = 5) = (10C5)(1/4)5(3/4)5= 252 × 0.0009765625 × 0.2373046875≈ 0.058

Part 2: Calculation of probability of getting more than 3 questions correct

(b) P(More than 3) = P(k > 3) = P(k = 4) + P(k = 5) + P(k = 6) + P(k = 7) + P(k = 8) + P(k = 9) + P(k = 10)

P(k = 4) = [tex]10\choose4[/tex](1/4)4(3/4)6 = 210 × 0.00390625 × 0.31640625 ≈ 0.02

P(k = 5) = [tex]10\choose5[/tex](1/4)5(3/4)5 = 252 × 0.0009765625 × 0.2373046875 ≈ 0.058

P(k = 6) = [tex]10\choose6[/tex](1/4)6(3/4)4 = 210 × 0.0002441406 × 0.31640625 ≈ 0.012

P(k = 7) = [tex]10\choose7[/tex](1/4)7(3/4)3 = 120 × 0.00006103516 × 0.421875 ≈ 0.002

P(k = 8) = [tex]10\choose8[/tex](1/4)8(3/4)2 = 45 × 0.00001525878 × 0.5625 ≈ 0.001

P(k = 9) = [tex]10\choose9[/tex](1/4)9(3/4)1 = 10 × 0.000003814697 × 0.75 ≈ 0.000

P(k = 10) = [tex]10\choose10[/tex](1/4)10(3/4)0 = 1 × 0.0000009536743 × 1 ≈ 0

P(More than 3) = 0.020 + 0.058 + 0.012 + 0.002 + 0.001 + 0.000 + 0≈ 0.093

Therefore, the probabilities of the given situations are: P(5) ≈ 0.058, P(More than 3) ≈ 0.093.

To know more about probability: https://brainly.com/question/251701

#SPJ11

Please help it’s for tmr
Leo has a number of toy soldiers between 27 and 54. If you want to group them four by four, there are none left, seven by seven, 6 remain, five by five, 3 remain. How many toy soldiers are there?
The answer is 48 but I need step by step explanation

Answers

Hence, 28 toy soldiers are the correct answer.

In mathematics, how is a group defined?

A group in mathematics is created by combining a set with a binary operation. For instance, a group is formed by a set of integers with an arithmetic operation and a group is also formed by a set of real numbers with a differential operator.

Let's refer to the quantity of toy soldiers as "x".

We are aware that x is within the range of 27 and 54 thanks to the problem.

x can be divided by 4 without any remainders.

The residual is 6 when x is divided by 7.

The leftover after dividing x by five is three.

These criteria allow us to construct an equation system and find x.

Firstly, we are aware that x can be divided by 4 without any residual. As a result, x needs to have a multiple of 4. We can phrase this as:

x = 4k, where k is some integer.

Secondly, we understand that the remaining is 6 when x is divided by 7. This can be stated as follows:

x ≡ 6 (mod 7)

This indicates that x is a multiple of 7 that is 6 more than. We can solve this problem by substituting x = 4k:

4k ≡ 6 (mod 7)

We can attempt several values of k until we discover one that makes sense for this equation in order to solve for k. We can enter k in to equation starting using k = 1, as follows:

4(1) ≡ 6 (mod 7)

4 ≡ 6 (mod 7)

It is not true; thus we need to attempt a next value for k. This procedure can be carried out repeatedly until the equation is satisfied for all values of k.

k = 2:

4(2) ≡ 6 (mod 7)

1 ≡ 6 (mod 7)

k = 3:

4(3) ≡ 6 (mod 7)

5 ≡ 6 (mod 7)

k = 4:

4(4) ≡ 6 (mod 7)

2 ≡ 6 (mod 7)

k = 5:

4(5) ≡ 6 (mod 7)

6 ≡ 6 (mod 7)

k = 6:

4(6) ≡ 6 (mod 7)

3 ≡ 6 (mod 7)

k = 7:

4(7) ≡ 6 (mod 7)

0 ≡ 6 (mod 7)

We have discovered that the equation 4k 6 (mod 7) is fulfilled when k = 7. Thus, we can change k = 7 to x = 4k to determine that:

x = 4(7) = 28

This indicates that there are 28 toy troops. Yet we also understand that the leftover is 3 when x is divided by 5. We don't need to take into account any other values of x because x = 28 satisfies this requirement.

28 toy soldiers are the correct response.

To know more about group visit:

https://brainly.com/question/28854364

#SPJ1

Smores, a Taste of Multivariate Normal Distribution Smores Company store makes chocolate (Xi), marshmallow (X2), and graham cracker (Xs). Assume that the profit (in millions) for selling these smores materials follow a multivariate uormal ditributim with parameters 1 0.3 0.3 and Σ= 0.31 0 0.3 01 What is the probability that 1. the profit for selling chocolate is greater than 6 millions? 2. the profit for selling chocolate is greater than 6 millions, given the sales of marshmallow is 5 million and the sales of graham cracker is 5 mllion? 3. P(3X1-1X2 + 3X3 > 20)?

Answers

 The probability of [tex]3X1-1X2 + 3X3[/tex] being greater than 20 is given by[tex]P(3X1-1X2 + 3X3 > 20) = 1- Φ((20-3μ1+μ2-3μ3)/(√3σ11+σ22+3σ33))[/tex].

In this case, [tex]μ1=10, μ2=10, μ3=10, σ11=0.3, σ22=0.3, σ33=0.3,[/tex] so the probability of [tex]3X1-1X2 + 3X3[/tex] being greater than 20 is 1-Φ(-1.0).

1. To answer this question, we can use the formula for a multivariate normal distribution.

The probability of the profit for selling chocolate being greater than 6 million is given by P(X1 > 6) = 1- Φ(6-μ1)/(√σ11). In this case, μ1=10, σ11=0.3, so the probability of the profit being greater than 6 million is 1-Φ(2.667).

2. To answer this question, we need to use the formula for the conditional probability of a multivariate normal distribution.

The probability of the profit for selling chocolate being greater than 6 million, given the sales of marshmallow is 5 million and the sales of graham cracker is 5 million, is given by

[tex]P(X1>6 | X2=5, X3=5) = 1- Φ((6-μ1-Σ12*5-Σ13*5)/(√σ11-Σ12²-Σ13²))[/tex]. In this case,

[tex]μ1=10, σ11=0.3, Σ12=0.3, Σ13=0.3,[/tex]so the probability of the profit being greater than 6 million is 1-Φ(-0.1).

for such more questions on  probability

https://brainly.com/question/13604758

#SPJ11


The interest rate of an auto
loan is 4%. Express this
number as a decimal.

Answers

Answer: 0.04

Step-by-step explanation:

In order to get 4% as a decimal, you must divide 4 by 100.

4/100 = 0.04

Thus, the answer to your question is 0.04

what is the value of y in the solution to the system of equations below.
y=-x+6
2x-y=-9

Answers

Answer:

I gave a couple solutions as I wasn't sure if you were asking for graphing purposes or substituting y=-x+6 into the second equation 2x-y=-9. So I gave both solutions just in case.

for the first equation y=-x+6, y intercept is (0,6)

for equation two 2x-y=-9, y intercept is (0,9)

In both of the equations the x value is 1.

Solving for y without graphing. Y=9+2x

and x=-1

Step-by-step explanation:substitute i

HOWEVER, if you are saying that the top equation is the value of y, then you substitute it into the bottom equation. 2x--x+6=-9 which would be x=-5

It really depends on what is expected of the question. I wasn't sure which one, so I gave a couple different approaches. If you could give more information, such as, are you graphing, that would be great. I'll keep an eye out for any comments.

a data set consists of the data given below plus one more data point. when the additional point is included in the data set the sample mean of the resulting data set is 32.083. what is the value of the additional data point?

Answers

The value of the additional data point is  [tex]$19.17$[/tex].

What is the value of the additional data point?

Let us first find the mean of the given data:

[tex]Mean = \frac{\sum_{i=1}^{n} x_i}{n}=\frac{39 + 45 + 43 + 42 + 44}{5}= 42.6[/tex]

Now let's find the value of the additional data point. Let the value of the additional data point be x. Therefore, the new sum of data is

[tex]$(39+45+43+42+44+x)$[/tex].

Total numbers of data are 6 (five given in the set and one additional data point).So, the mean of the resulting data set is given by:

[tex]32.083 = \frac{(39+45+43+42+44+x)}{6}[/tex]

Multiplying both sides of the equation by 6 we get:

[tex]6 \times 32.083 = (39+45+43+42+44+x)[/tex]

We have the value of [tex]$39+45+43+42+44$[/tex] which is [tex]$213$[/tex].

Therefore, substituting all the values, we get:

[tex]193.83 + x = 213[/tex]

On subtracting [tex]$193.83$[/tex] from both sides, we get the value of

[tex]x. x = 213 - 193.83 = 19.17[/tex]

Therefore, the value of the additional data point is [tex]$19.17$[/tex]

See more about sample mean at: https://brainly.com/question/29441200

#SPJ11

Find the distance between each pair of points.
a. M= (0,-11) and P=(0,2)
b. A= (0,0) and B= (-3,-4)
c. C= (8,0) and D=(0,-6)

Answers

Answer:

To calculate the distance between each pair of points given, we can use the distance formula which is derived from the Pythagorean theorem. The formula is:

distance = square root of [(x2 - x1)^2 + (y2 - y1)^2]

Using this formula, we can calculate the following distances:

a. Distance between M and P = 13 units

b. Distance between A and B = 5 units

c. Distance between C and D = 10 units

CAN SOMEBODY HELP ME FACTOR AS THE PRODUCT OF TWO BINOMIALS
x²- x- 42

Answers

Answer:

(x-7)(x+6)

factor and see what works

what is the z-score for the 25th percentile of the standard normal distribution?A. -0.625
B. 0.50 C. 0.60 D. -0.50 E. 0.00

Answers

The z-score for the 25th percentile of a standard normal distribution is approximately -0.625. Here option A is the correct answer.

To find the z-score for the 25th percentile of a standard normal distribution, we need to use a standard normal distribution table or calculator. The 25th percentile corresponds to a cumulative area under the standard normal curve of 0.25.

Using a standard normal distribution table or calculator, we can find that the z-score corresponding to a cumulative area of 0.25 is about -0.68. This means that approximately 25% of the area under the standard normal curve lies to the left of -0.625.

So, among the given options, the correct answer is Option A, -0.625, Option D, -0.50, which is also incorrect. Option E, 0.00, is definitely incorrect because the 25th percentile is to the left of the mean.

To learn more about standard normal distribution

https://brainly.com/question/29509087

#SPJ4

Solve: 3√x-√9x-17 =1 ​

Answers

The solution to the equation (3√x) - √(9x-17) = 1 is x = 9.

What is the solution to the given equation?

Given the equation in the question (3√x) - √(9x-17) = 1.

To solve for x in the given equation:

(3√x) - √(9x-17) = 1

We can start by isolating the square root term on one side of the equation. Adding √(9x - 17) to both sides, we get:

(3√x) = √(9x - 17) + 1

Squaring both sides of the equation, we get:

(3√x)² = (√(9x - 17) + 1)²

9x = -16 + 2√(9x - 17) + 9x

Solve for 2√(9x - 17)

2√(9x - 17) = 16

36x - 68 = 256

Add 68 to both sides

36x - 68 + 68 = 256 + 68

36x = 324

x = 324/36

x = 9

Therefore, the solution is x = 9.

Learn more about square roots here: https://brainly.com/question/3120622

#SPJ1

Guidance Missile System A missile guidance system has seven fail-safe components. The probability of each failing is 0.2. Assume the variable is binomial. Find the following probabilities. Do not round intermediate values. Round the final answer to three decimal places, Part: 0 / 4 Part 1 of 4 (a) Exactly two will fail. Plexactly two will fail) = Part: 1/4 Part 2 of 4 (b) More than two will fail. P(more than two will fail) = Part: 214 Part: 2/4 Part 3 of 4 (c) All will fail. P(all will fail) = Part: 3/4 Part 4 of 4 (d) Compare the answers for parts a, b, and c, and explain why these results are reasonable. Since the probability of each event becomes less likely, the probabilities become (Choose one smaller larger Х 5

Answers

The probability of all will fail is the lowest.

The given problem states that a missile guidance system has seven fail-safe components, and the probability of each failing is 0.2. The given variable is binomial. We need to find the following probabilities:

(a) Exactly two will fail.

(b) More than two will fail.

(c) All will fail.

(d) Compare the answers for parts a, b, and c, and explain why these results are reasonable.

(a) Exactly two will fail.

The probability of exactly two will fail is given by;

P(exactly two will fail) = (7C2) × (0.2)2 × (0.8)5
= 21 × 0.04 × 0.32768
= 0.2713

Therefore, the probability of exactly two will fail is 0.2713.

(b) More than two will fail.

The probability of more than two will fail is given by;

P(more than two will fail) = P(X > 2)
= 1 - P(X ≤ 2)
= 1 - (P(X = 0) + P(X = 1) + P(X = 2))
= 1 - [(7C0) × (0.2)0 × (0.8)7 + (7C1) × (0.2)1 × (0.8)6 + (7C2) × (0.2)2 × (0.8)5]
= 1 - (0.8)7 × [1 + 7 × 0.2 + 21 × (0.2)2]
= 1 - 0.2097152 × 3.848
= 0.1967

Therefore, the probability of more than two will fail is 0.1967.

(c) All will fail.

The probability of all will fail is given by;

P(all will fail) = P(X = 7) = (7C7) × (0.2)7 × (0.8)0
= 0.00002

Therefore, the probability of all will fail is 0.00002.

(d) Compare the answers for parts a, b, and c, and explain why these results are reasonable.

The probability of exactly two will fail is the highest probability, followed by the probability of more than two will fail. And, the probability of all will fail is the lowest probability. These results are reasonable since the more the number of components that fail, the less likely it is to happen. Therefore, it is reasonable that the probability of exactly two will fail is higher than the probability of more than two will fail, and the probability of all will fail is the lowest.

Learn more about Probability

brainly.com/question/23017717

#SPJ11

Use the following function to find d(0)
d(x)=-x+-3
d(0)=

Answers

Answer:

d(0) = -3

Step-by-step explanation:

d(x) = -x + -3                           d(0)

d(0) = 0 - 3

d(0) = -3

So, the answer is d(0) = -3

Will make you brainlist!

Answers

Answer:

x = -2 ,  y = 2

Step-by-step explanation:

label your equations (1) and (2) the question mention to use elimination method and make x the same for both. To do that multiply equation (1) by 2. than label it (3)so 3x becomes 6x adding the equation (2)+(3) cancels out -6x and 6x so you can find value of yuse value of y to find x

hope this helps :)

What is the volume of the prism below?

Answers

Answer:30

Step-by-step explanation: the formula is base x height over 2, so (6x10)/2 is 30.

A straw that is 15cm long leans against the inside of a glass. The diameter of a glass is
5cm, and has a height of 8cm. How far past the edge of the glass would the straw extend?
Round your answer to the nearest tenth.

Answers

The straw will extend past the edge of the glass in a straight line. To find the answer, subtract the diameter of the glass (5cm) from the length of the straw (15 cm): 15 cm - 5 cm = 10 cm. This is the distance the straw will extend past the edge of the glass. To round to the nearest tenth, round 10.0 up to 10.1. Therefore, the straw will extend past the edge of the glass 10.1 cm.

Solve the system of equations shown below using graphing and substitution. y=2x+3 and y=15-x

Answers

Answer: -17x+3

Step-by-step explanation:

y=2x+3 and y=15-x

15x-2x+3

-17x+3

you can try this

LetR=[0, 4]×[−1, 2]R=[0, 4]×[−1, 2]. Create a Riemann sum by subdividing [0, 4][0, 4] into m=2m=2 intervals, and [−1, 2][−1, 2] into n=3n=3 subintervals then use it to estimate the value of ∬R (3−xy2) dA∬R (3−xy2) dA.Take the sample points to be the upper left corner of each rectangle

Answers

The Riemann sum is:Σ(3-xᵢₖ*yᵢₖ²)ΔA, where i=1,2 and k=1,2,3.

We can create a Riemann sum to estimate the value of the double integral ∬R (3-xy²) dA over the rectangular region R=[0, 4]×[-1, 2] by subdividing [0, 4] into m=2 intervals and [-1, 2] into n=3 intervals. Then we can evaluate the function at the upper left corner of each subrectangle, multiply by the area of the rectangle, and sum all the results.

The width of each subinterval in the x-direction is Δx=(4-0)/2=2, and the width of each subinterval in the y-direction is Δy=(2-(-1))/3=1. The area of each subrectangle is ΔA=ΔxΔy=2*1=2.

Therefore, the Riemann sum is:

Σ(3-xᵢₖ*yᵢₖ²)ΔA, where i=1,2 and k=1,2,3.

Evaluating the function at the upper left corner of each subrectangle, we get:

(3-0*(-1)²)2 + (3-20²)2 + (3-21²)2 + (3-41²)*2 = 2 + 6 + 2 + (-22) = -12.

Thus, the estimate for the double integral is -12.

For more questions like Riemann click the link below:

https://brainly.com/question/30404402

#SPJ11

n+d=21
0.05n + 0.10d= 1.70

Answers

Answer:

To solve the system of equations:

n + d = 21 ---(1)

0.05n + 0.10d = 1.70 ---(2)

We can use the substitution method by solving for one variable in terms of the other from equation (1) and substituting it into equation (2).

Solving equation (1) for n:

n = 21 - d

Substituting this expression for n into equation (2):

0.05(21 - d) + 0.10d = 1.70

Distributing the 0.05:

1.05 - 0.05d + 0.10d = 1.70

Combining like terms:

0.05d = 0.65

Dividing both sides by 0.05:

d = 13

Substituting this value of d into equation (1):

n + 13 = 21

Solving for n:

n = 8

Therefore, the solution to the system of equations is n = 8 and d = 13.

What’s -9.1 times 3.75

Answers

-9.1 x 3.75 = -34.125

answer = -34.125
the answer to ur question is -34.125

Write an equation of the line that is parallel to y = 12
x + 3 and passes through the point (10, -5).

Answers

Answer:

y = 12x - 125

Step-by-step explanation:

the equation of a line in slope- intercept form is

y = mx + c ( m is the slope and c the y- intercept )

y = 12x + 3 ← is in slope- intercept form

with slope m = 12

• Parallel lines have equal slopes , then

y = 12x + c ← is the partial equation

to fond c substitute (10, - 5 ) into the partial equation

- 5 = 12(10) + c = 120 + c ( subtract 120 from both sides )

- 125 = c

y = 12x - 125 ← equation of parallel line

I NEED ANSWERS ASAP….

Answers

Answer:

Step-by-step explanation:

It is set up

7x+5x+2y=20

7x+5x=12x

12x+2y=20

x=0

y=10

12(0)+2(10)=20

Ok so maybe this was not the same type of equation i thought it was it is not that easy!

Other Questions
Can you make all 8 unique colors using 3 bits per color? Change 0.182 0.005 0.050 0.174 Table 10-3. Regression results for predicting depression at wave 2 Predictor Variable b Beta P R? Depression Score Wave 1 0.267 0.231 0.000 0.182 Sociodemographic Age -0.014 -0.024 0.538 0.187 Sex 0.165 0.034 0.370 Psychologic Health Neuroticism, wave 1 0.067 0.077 0.056 0.0237 Past history of depression 0.320 0.136 0.000 Physical Health ADL, wave 1 -0.154 0.103 0.033 0.411 ADL, Wave 2 0.275 0.283 0.012 ADL?, wave 2 -0.013 --0.150 0.076 Number of current 0.115 0.117 0.009 symptoms, wave 2 Number of medical 0.309 0.226 0.000 conditions, wave 2 BP, systolic, wave 2 -0.010 -0.092 0.010 Global health rating 0.284 0079 0.028 change Sensory impairment -0.045 -0.064 0.073 change Social support inactivity Social support-friends, -1.650 -0.095 0.015 0.442 wave 2 Social support-visits, -1.229 -0.087 0.032 wave 2 Activity level, wave 2 0.061 0.095 0.025 Services (community residents 0.207 0.135 0.001 0.438 only), wave 2 Abhreviation: BP = blood pressure 0.031 0.015 Based on above MLRA summary Table, which of following independent variables is the strongest predictor (or factor)?Number of medical conditions, wave 2Number of current symptoms, wave 2Global health rating changePast history of depressionADL, wave 2 a microwave oven operates at 2.90 ghz . what is the wavelength of the radiation produced by this appliance? Labora un texto en el que le expliques a Julio qu tipo de utensilios usar para preparar comidas calientes o fras, brindando el sustento respectivo y explicando con detalle cmo llegas a esa conclusin. Adems, explica cmo la tecnologa ayuda en la elaboracin de utensilios que se usan para alimentos calientes o fros. Labora un texto en el que le expliques a Julio qu tipo de utensilios usar para preparar comidas calientes o fras, brindando el sustento respectivo y explicando con detalle cmo llegas a esa conclusin. Adems, explica cmo la tecnologa ayuda en la elaboracin de utensilios que se usan para alimentos calientes o fros suppose that typically you pay $10 for an uber ride to work. today, you take the same trip, but find that the price has risen to $12. which of the following options could result in the price change above? (select all that apply) a. there is an increase in the number of uber drivers available. b. a local convention has increased traffic in the area, resulting in a longer travel time for your trip. c. gas prices have significantly risen in the past day. d. the price of taxi cab rides has fallen. which of the following includes all common types of radioactive decay? a. atomic number, beta particle emission, electron capture B. alpha particle emission, beta particle emission, half-life C. alpha particle emission, beta particle emission, radioactive parent isotope D. alpha particle emission, beta particle emission, electron capture E. alpha particle emission, stable daughter, electron capture research by the public agenda organization found that the number one reason students gave for dropping out of college is which of these? Cual es la formula de 4-etil-5-propil-3,4,7-trimetildecano Q3 NEED HELP PLEASE HELP If pulse 1 were reflected from a wall, which one of the patterns above would represent the reflected pulse? A) 1 B) 2 C) 3 D) 4 E) 5 Martina made $60 for 5 hours of work. At the same rate, how many hours would she have to work to make $204 ? a major guideline for healthy people is to limit calorie intakes and obtain more and varied selections of A certain population is strongly skewed to the left. We want to estimate its mean, so we will collect a sample. Which should be true if we use a large sample rather than a small one?I. The distribution of our sample data will be closer to normal.II. The sampling model of the sample means will be closer to normal.III. The variability of the sample means will be greater.A. I and II onlyB. I onlyC. III onlyD. II and III onlyE. II only which of the following is not an advantage of using functions. a. using functions makes reusing code easier. b. using functions makes programs easier to read. c. using functions abstracts away from detailed implementation. d. using functions makes program run faster. if you reduce the smount of added sugar in a product the total carbs in the product You are sitting in a classroom next to the wall looking at the blackboard at the front of the room. The blackboard is 12 ftlong and starts 3 ft from the wall you are sitting next to. Show that your viewing angle isa=cot^-1 x/15 - cot^-1 x/3if you are a ft from the front wall. A user copies les from her desktop computer to a USB ash device and puts the device into her pocket. Which of the following security risks is most pressing?(a) Non-repudiation(b) Integrity(c) Availability(d) Condentiality The bakers at healthy bakery can make 190 bagels in 10 hours. How many bagels can they make in 17 hours? What is the rate per hour? Why is fermentation a required pathway for providing cellular energy when oxygen is unavailable or in insufficient supply? NAD is not regenerated by the electron transport chain. ATP production requires oxygen. NADH cannot be reduced to NAD Cells need either lactic acid or ethanol when oxygen is low, Lactic acid or ethanol can be used to generate oxygen. Discuss how far sociologists agreee that nucleur families benefit frim members of the family and society