Please help quick with this question.

The volume of the solid whose base is the region inside the circle with radius 3 if the cross sections taken parallel to one of the diameters are equilateral triangles is 81/2*\sqrt3 by using the slicing method.

To find the volume of the solid whose base is the region inside the circle with radius 3, we need to integrate the area of the cross sections taken parallel to one of the diameters, which are equilateral triangles.

Let's consider a cross section of the solid taken at a distance x from the center of the circle.

Since the cross section is an equilateral triangle, all its sides have the same length.

Let  this length be y. Since the triangle is equilateral, its height can be found using the Pythagorean theorem as follows:

[tex]height = \sqrt{(y^2 - (y/2)^2)} = \sqrt{(3/4y^2)}= \sqrt{3/2y}[/tex]

Therefore, the area of the cross section at a distance x from the center of the circle is:

[tex]A(x) = (1/2)y\sqrt{3/2y} = \sqrt{3/4y^2}[/tex]

Now, we need to integrate this area over the range of x from -3 to 3 (since the circle has radius 3):

[tex]V = \int\ [-3,3]\sqrt{3/4*y^2} dx[/tex]

To find the limits of integration for y, we need to consider the equation of the circle:

[tex]x^2 + y^2= 3^2[/tex]

Solving for y, we get:

[tex]y =\pm\sqrt{(3^2 - x^2)}=\pm\sqrt{(9^2 - x^2)}[/tex]

Since we want the cross sections to be equilateral triangles, we know that y is equal to the height of an equilateral triangle with side length equal to the diameter of the circle, which is 2*3 = 6. Therefore, we can write:

[tex]y = 3*\sqrt{3}[/tex]

Substituting this into the integral, we get:

[tex]V = \int\ [-3,3] \sqrt{3/4*(3\sqrt3)^2} dx[/tex]

[tex]= \int\ [-3,3] 27/4*\sqrt{3} dx[/tex]

Integrating, we get:

[tex]V = [27/4\sqrt{3x}]*[-3,3][/tex]

[tex]= 81/2*\sqrt{3}[/tex]

Therefore, the volume of the solid is [tex]81/2*\sqrt3[/tex]cubic units

To practice more questions about 'volume of solid':

https://brainly.com/question/20284914

#SPJ11

Answer:

3x, 4x | 5, 3

Step-by-step explanation:

After the time of seven hours, the cream pie would have approximately 768 S. aureus cells after 7 hours with a generation time of 60 minutes.

Six S. aureus cells have been accidentally inoculated into a cream pie. S. aureus has a generation time of 60 minutes. S. aureus is a pathogenic bacterium found in the environment, as well as on the skin, and in the upper respiratory tract.

The generation time of this bacterium is 60 minutes, meaning that a single bacterium can produce two new cells in 60 minutes.

If there are 6 S. aureus cells in a cream pie, the number of bacteria will continue to increase as time passes.

The number of generations (n) in seven hours is calculated as:

n = t/g

n = 7 hours × 60 minutes/hour/60 minutes/generation = 7 generations

The number of cells in the cream pie after 7 hours is calculated as :

N = N₀ × 2ⁿ

N = 6 cells × 2⁷

N = 768 cells

Therefore, after seven hours, the cream pie would have approximately 768 S. aureus cells.

Learn more about Number of generations here:

https://brainly.com/question/17045618

#SPJ11

An inequality representing the amount that the island of Martinique can received for hurricane relief efforts, where x is the number of days is y ≤ 32,000 + 4,500x.

Inequality is an algebraic statement that two or more mathematical expressions are unequal.

Inequalities can be represented as:

The total amount received by the island = $32,000

The daily receipt of donations = $4,500

Let the number of days = x

Let the funds raised for aid = y

y ≤ 32,000 + 4,500x

Thus, the inequality for the funds that the island can fundraise for hurricane relief aid by the end of the month is y ≤ 32,000 + 4,500x.

Learn more about inequalities at https://brainly.com/question/24372553.

#SPJ1

Answer:

436g

Step-by-step explanation:

1kg=1000g

3kg=3000g

3000+52=3052

3052÷7=436

The upper bound of a + b can be found by adding the upper bounds of a and b.

For a = 5cm, the nearest whole number is 5. The upper bound would be the midpoint between 5 and 6, which is 5.5.

For b = 3cm, the nearest whole number is 3. The upper bound would be the midpoint between 3 and 4, which is 3.5.

So the upper bound of a + b is:

5.5 + 3.5 = 9

Therefore, the upper bound of a + b is 9cm.

Answer:

Step-by-step explanation:

To solve this problem, we need to find out how many seats there are in total, and then multiply that by the price per ticket.

To find the total number of seats, we need to add up the number of seats in each row. We can use the formula for an arithmetic sequence to do this:

S = n/2 * (a + l)

where S is the sum of the sequence, n is the number of terms, a is the first term, and l is the last term.

In this case, we have:

n = 20 (since there are 20 rows)

a = 25 (since there are 25 seats in the first row)

d = 2 (since the difference between each row is 2 seats, the common difference is 2)

We can use d to find the last term as well:

l = a + (n-1)*d

l = 25 + (20-1)*2

l = 25 + 38

l = 63

Now we can plug these values into the formula:

S = 20/2 * (25 + 63)

S = 10 * 88

S = 880

So there are 880 seats in total.

To find the total sales, we just need to multiply by the price per ticket:

total sales = 880 * $32

total sales = $28,160

Therefore, the total sales for a one-night concert with all seats taken would be $28,160.

In the following question, among the given options, Option (b) "Parabola B is wider than Parabola A" and option (d) "The line of symmetry of Parabola A is to the left of that of Parabola B" are the true statements.

The following statements are true about the parabolas: c. the parabolas have the same line of symmetry, and d. the line of symmetry of parabola A is to the right of that of parabola B.

Parabola A and Parabola B have the x-axis as the directrix, with the focus of Parabola A at (3,2) and the focus of Parabola B at (5,4). As the focus of Parabola A is to the left of the focus of Parabola B, the line of symmetry for Parabola A is to the right of the line of symmetry of Parabola B.

Parabola A and Parabola B may have different widths, depending on their equation, but this cannot be determined from the information given.

For more such questions on Parabola

https://brainly.com/question/29635857

#SPJ11

Answer:

- 1 and 7

Step-by-step explanation:

to find h(0) substitute x = 0 into h(x)

h(0) = 4(0) - 1 = 0 - 1 = - 1

to find h2) substitute x = 2 into h(x)

h(2) = 4(2) - 1 = 8 - 1 = 7

The reason why the terms a and m have to be relatively prime integers is that it is the only way to make sure that ax≡1 (mod m) is solvable for x within the integers modulo m.

Theorem:"If a and m are relatively prime integers and m > 1, then an inverse of a modulo m exists. Furthermore, this inverse is unique modulo m. (That is, there is a unique positive integer a less than m that is an inverse of a modulo m and every other inverse of a modulo m is congruent to a modulo m.)"If a and m are relatively prime integers and m > 1, then an inverse of a modulo m exists. Furthermore, this inverse is unique modulo m. (That is, there is a unique positive integer a less than m that is an inverse of a modulo m and every other inverse of a modulo m is congruent to a modulo m.)The inverse of a modulo m is another integer, x, such that ax≡1 (mod m).

This theorem has an interesting explanation: if a and m are not co-prime, then there is no guarantee that ax≡1 (mod m) has a solution in Zm. The reason for this is that if a and m have a common factor, then m “absorbs” some of the factors of a. When this happens, we lose information about the congruence class of a, and so it becomes harder (if not impossible) to undo the multiplication by .This is the reason why the terms a and m have to be relatively prime integers.

To know more about function click here :

https://brainly.com/question/12976257

#SPJ11

Answer:

To use an area model to determine the quotient of 556 and 16, we can divide a rectangle of area 556 into 16 equal parts. Each part will have an area of 556/16.

We can start by dividing 556 into 16 groups of 10 (160), and then into 16 groups of 3 (48). That leaves us with a remainder of 4.

So we have:

556 = 16 x 34 + 48 + 4

This shows that 556 can be written as 16 times some whole number (34) plus a remainder of 48 + 4/16.

Simplifying the remainder, we have:

48 + 4/16 = 48 + 1/4 = 48.25

Therefore, the quotient of 556 and 16 is:

556/16 = 34 1/4

The quotient of 556 and 16 using an area model can be determined by producing a rectangle with the total area of 556 and one side of 16. The length of the other side will be the quotient. In this case, the quotient is 34 3/4.

When asked to determine the quotient of 556 and 16 using the area model, one way to think of this is making a rectangle. The total area is 556 and one side is 16. The length of the other side will be the quotient.

Start by first estimating how many times 16 could fit into 556. Let's take 30 as an estimate, because 30*16 = 480, which is relatively close to 556. Draw a rectangle with the width of 16 and the length of 30.

Find the difference between the rectangle's area and 556. So, 556 - 480 = 76. Now, 76 is our remaining area to fill. 16 goes into 76 four more times, adding up to 64.

There is still a leftover area, which is 76-64 = 12. This is smaller than our width of 16. So, your final answer is 34 12/16 or 34 3/4 in simplest form.

https://brainly.com/question/18472914

#SPJ2

The equation in standard form for the circle with center (5,0) passing through (5, 9/2) is 4x² + 4y² - 40x + 19 = 0

Given that

Center = (5, 0)

Point on the circle = (5. 9/2)

The equation of a circle can be expressed as

(x - a)² + (y - b)² = r²

Where

Center = (a, b)

Radius = r

So, we have

(x - 5)² + (y - 0)² = r²

Calculating the radius, we have

(5 - 5)² + (9/2 - 0)² = r²

Evaluate

r = 9/2

So, we have

(x - 5)² + (y - 0)² = (9/2)²

Expand

x² - 10x + 25 + y² = 81/4

Multiply through by 4

4x² - 40x + 100 + 4y² = 81

So, we have

4x² + 4y² - 40x + 19 = 0

Hence, the equation is 4x² + 4y² - 40x + 19 = 0

Read more about circle equation at

https://brainly.com/question/1506955

#SPJ1

Answer:

(-2,9)

Step-by-step explanation:

when moving it 5 units left on the x axis it would be 5-7

So in turn you would be given (-2,9)

Because the y stays the same you would still have (?,9)

Answer:

P = [tex]2y^{2}[/tex] + 4xy +4

Q = [tex]-3y^{2}[/tex] + 7 -3xy

R = -3xy +8

Step-by-step explanation:

Answer:

12

Step-by-step explanation:

i think its right

Answer:

To find the point that partitions the line segment AB in a ratio of 1:3, we can use the following formula:

P = (3B + 1A) / 4

where P is the point that partitions the line segment in a ratio of 1:3, A and B are the endpoints of the line segment, and the coefficients 3 and 1 represent the ratio of the segment we are dividing.

Substituting the values, we get:

P = (3*(-1, -5) + 1*(-5, 3)) / 4

P = (-3, -7)

Therefore, the point that partitions the line segment AB in a ratio of 1:3 is (-3, -7).

Step-by-step explanation:

The parabolic trajectory of the falling prey can be described by the equation y = 228 – x2/57, where y is the height above the ground and x is the horizontal distance traveled in meters. In this case, the prey was dropped at a height of 228 m and flying at 19 m/s. To calculate the total distance traveled by the prey, we can use the equation for the parabola to solve for x.

We can rearrange the equation y = 228 – x2/57 to solve for x, which gives us[tex]x = √(57*(228 – y))[/tex]. When the prey hits the ground, the height (y) is 0. Plugging this into the equation for x, we can calculate that the total distance traveled by the prey is[tex]x = √(57*(228 - 0)) = √(57*228) = 84.9 m.\\[/tex] Expressing this answer to the nearest tenth of a meter gives us the final answer of 84.9 m.

for such more questions on  parabolic trajectory

https://brainly.com/question/13244761

#SPJ11

a block slides along a track that descends through distance h. The track is frictionless except for the lower section. There the block slides to a stop in a certain distance d because of friction. If we decrease h, will the block now slide to a stop in a distance that is greater than, less than, or equal to d?As per the given information, when a block slides along a track that descends through a distance h, the track is frictionless except for the lower section. There the block slides to a stop in a certain distance d because of friction. Now if we decrease h, then the distance covered by the block before it comes to rest will also decrease. So the block will slide to a stop in a distance that is less than d. Hence the answer is less than d.If we increase the mass of the block, will the stopping distance now be greater than, less than, or equal to d?

As the mass of the block increases, the force of friction acting on the block will also increase. Hence the stopping distance will also increase. So the stopping distance now will be greater than d. Hence the answer is greater than d.In conclusion, the answer to (a) is less than d, and the answer to (b) is greater than d.

for such more questions on conclusion

https://brainly.com/question/26093731

#SPJ11

The first 4 terms of the sequence represented by the expression 3n + 5

is 8, 11, 14 and 17.

Sequence:

In mathematics, an array is an enumerated collection of objects in which repetition is allowed and in case order. Like a collection, it contains members (also called elements or items). The number of elements (possibly infinite) is called the length of the array. Unlike sets, the same element can appear multiple times at different positions in the sequence, and unlike sets, order matters. Formally, a sequence can be defined in terms of the natural numbers (positions of elements in the sequence) and the elements at each position. The concept of series can be generalized as a family of indices, defined in terms of any set of indices.

According to the Question:

Given, aₙ = (3n+5).

First four terms can be obtained by putting n=1,2,3,4

a 1=(3×1+5) = 8

a 2 =(3×2+5) = 11

a 3 =(3×3+5) = 14

a 4 =(3×4+5) = 17

First 4 terms in the sequence are 8, 11, 14, 17.

Learn more about Sequence:

https://brainly.com/question/30262438

#SPJ4

a. S = {(1, -1), (2, 1)}Let's begin by calculating the determinant of the matrix composed of the vectors of S, and checking if it is equal to 0. Because the two vectors are not colinear, they should span R2.|1 -1||2 1| determinant is not 0, therefore S spans R2. No geometric description is required for this example.

b. S = {(1, 1)} The set S contains one vector. A set containing only one vector cannot span a plane because it only spans a line. Therefore, S does not span R2. Geometric description: S spans a line that passes through the origin (0, 0) and the point (1, 1).c. S = {(0, 2), (1, 4)} Let's again begin by calculating the determinant of the matrix composed of the vectors of S, and checking if it is equal to 0.|0 2||1 4| determinant is 0, thus S does not span R2. In this scenario, S only spans the line that contains both vectors, which is the line with the equation y = 2x.

Geometric description: S spans a line that passes through the origin (0, 0) and the point (1, 2).

Learn more about geometric description:

https://brainly.com/question/28159445

#SPJ11

Answer:

The point z = 3+4i is plotted as a blue dot, and the two square roots are plotted as a red dot and a green dot. The magnitudes of z and its square roots are shown by the radii of the circles centered at the origin.

Step-by-step explanation:

qrt(z) = +/- sqrt(r) * [cos(theta/2) + i sin(theta/2)]

where r = |z| = magnitude of z and theta = arg(z) = argument of z.

Calculate the magnitude of z:

|r| = sqrt((3)^2 + (4)^2) = 5

And the argument of z:

theta = arctan(4/3) = 0.93 radians

Now, find the two square roots of z:

sqrt(z) = +/- sqrt(5) * [cos(0.93/2) + i sin(0.93/2)]

= +/- 1.58 * [cos(0.47) + i sin(0.47)]

= +/- 1.58 * [0.89 + i*0.46]

Using a calculator, simplify this expression to:

sqrt(z) = +/- 1.41 + i1.41 or +/- 0.2 + i2.8

In the following question, among the given options, the statement is said to be, The pooled estimate of the standard deviation for the data given is √(54.14^2/10 + 24.26^2/10) = 22.74.

According to the rule for examining standard deviations in ANOVA from Chapter 12 (page 560), the within-group standard deviation should be no more than twice the size of the between-group standard deviation. In this case, the between-group standard deviation is 44.85 and the within-group standard deviation (22.74) is less than twice the size of the between-group standard deviation, so it is reasonable to use a pooled standard deviation for the analysis of these data.

For more such questions on deviation

https://brainly.com/question/475676

#SPJ11

a) To write the ratio of the number of machines to the number of crates packed per day in the form 1: n, we need to find the number of crates packed per day per machine. We can do this by dividing the total number of crates packed per day by the number of machines:

Number of crates packed per day per machine = 150 crates/day ÷ 60 machines = 2.5 crates/machine/day

Therefore, the ratio of the number of machines to the number of crates packed per day in the form 1: n is 1:2.5 or 2:5.

b) To find out how many crates of limes 70 of these machines would pack per day, we can use the ratio from part (a) to set up a proportion:

1 machine : 2.5 crates/day = 70 machines : x crates/day

Solving for x, we get:

x = (70 machines × 2.5 crates/day) / 1 machine = 175 crates/day

Therefore, 70 of these machines would pack 175 crates of limes per day.

Step-by-step explanation:

a) The ratio of the number of machines to the number of crates packed per day can be written as:

60 : 150

To simplify this ratio, we can divide both sides by 10:

6 : 15

Finally, we can divide both sides by 3 to get the ratio in the form 1 : n:

1 : 2.5

Therefore, the ratio of the number of machines to the number of crates packed per day is 1 : 2.5.

b) If 60 machines can pack 150 crates per day, then one machine can pack:

150/60 = 2.5 crates per day

So, 70 machines can pack:

70 × 2.5 = 175 crates per day

Therefore, 70 machines can pack 175 crates of limes per day.

The probability of getting tails in the three coins would be 0.125 or 12.5%.

To calculate the probability of an event happening, first, we need to identify the rate of the desired outcome versus the total possible outcomes. Moreover, to determine the total probability of two or more events happening we need to calculate the probability of each event and then multiply the results.

Probability of getting tails in any of the three coins:

1 / 2 = 0.5

Total probabilityy:

0.5 x 0.5 x 0.5 = 0.125 or 12.5%

Learn more about probability in https://brainly.com/question/30034780

#SPJ1

Answer: 12.84

Step-by-step explanation:

if x = 3.2 and y = 6.1  and Z = 0.2

then plug in the numbers

(3.2)(0.2) + (6.1)(2)

0.64 + 12.2 = 12.84

Any variable next to a number means multiplication.

if I was wrong lmk

In data analytics, a population refers to all possible data values in a certain dataset.

Data analytics is a set of procedures and processes for examining datasets in order to draw conclusions from the information they contain, often aided by specialized systems and software. Organizations use data analytics to aid decision-making, increase efficiency, and evaluate outcomes.

The population and sample are two concepts in statistics. The population and sample are two concepts in statistics. The population is the entire set of objects or individuals being studied, while the sample is a subset of the population that is chosen for analysis. The sample is a subset of the population, chosen at random or according to some other criteria in order to represent the population as a whole.

Learn more about dataset here: https://brainly.com/question/30034464

#SPJ11

A bin can hold 28 pounds. each toy car weighs 7 ounces., so the bin can hold 64 toy cars.

To determine the number of toy cars the bin can hold, we must first convert the weight limit of the bin and the weight of the toy cars to a uniform unit of measure.

We'll then divide the weight limit of the bin by the weight of one toy car. After that, we'll multiply the resulting value by the number of ounces in one pound (16).

Here's how to solve the problem:

1 pound = 16 ounces

Therefore, a bin that can hold 28 pounds can hold:28 × 16 = 448 Ounces

The weight of one toy car is 7 ounces.

Divide the weight limit of the bin (448 ounces) by the weight of one toy car (7 ounces):

448 ÷ 7 = 64

Therefore, the bin can hold 64 toy cars.

Learn more about weight limit at

https://brainly.com/question/14375094

#SPJ11

The three examples of contracts are:

Contracts are legal agreements between two or more parties that involve the exchange of goods, services, or money. They can be classified as unilateral or bilateral, express or implied, executed or executory.

Here are three examples of contracts that a person can be a part of:

To know more about the "contracts":https://brainly.com/question/5746834

#SPJ11

The result (recurrent value), A = sum j=1 to 89 ln(j), is true for every n. This is the desired result.

As in T(n) = T(n/2) + n, T(0) = T(1) = 1, a recurrence or recurrence relation specifies an infinite sequence by explaining how to calculate the nth element of the sequence given the values of smaller members.

We can start by proving the base case in order to demonstrate the first portion through recurrence. Let n = 1. Next, we have:

Being true, ln(a1) = ln(a1). If n = k, let's suppose the formula is accurate:

Sum j=1 to k ln = ln(prod j=1 to k aj) (aj)

Prod j=1 to k aj * ak+1 = ln(prod j=1 to k+1 aj)

(Using the logarithmic scale) = ln(prod j=1 to k aj) + ln(ak+1)

Using the inductive hypothesis, the property ln(ab) = ln(a) + ln(b)) = sum j=1 to k ln(aj) + ln(ak+1) = sum j=1 to k+1 ln (aj)

(b), we can use the just-proven formula:

A = ln(1, 2,...) + ln + ln (89)

= ln(j=1 to 89) prod

sum j=1 to 89 ln = ln(prod j=1 to 89 j) (j).

To know more about hypothesis visit:-

https://brainly.com/question/29519577

#SPJ1

Answer:

Starting with the left side of the equation:

cosθ(1+tanθ) = cosθ(1+sinθ/cosθ) (since tanθ = sinθ/cosθ)

= cosθ + sinθ

Therefore, the left side of the equation is equal to the right side of the equation, which means that cosθ(1+tanθ) = cosθ+sinθ is true.