Answer:
The correct answer is -
FALSIFIABLE:
Aloe vera gel can heal wounds by boosting cell renewal.
Drinking aloe juice can reduce the risk of lung cancer.
NON-FALSIFIABLE:
Aloe vera gel is the best natural skin moisturizer.
Aloe vera juice tastes better than carrot juice.
Explanation:
Falsifiable is the ability or chances of any hypothesis, claim or statement to be proved wrong. In such a hypothesis, it is possible to carry an experimental observation that disproves the idea in claim or question.
In the given examples
Aloe vera gel can heal wounds by boosting cell renewal.
Drinking aloe juice can reduce the risk of lung cancer.
There is no observation in the favor of the claim so there more likely to be falsifiable whereas, Aloe vera gel is the best natural skin moisturizer.
Aloe vera juice tastes better than carrot juice are more non-falsifiable as these are based on personal choice or experimental observation.
Answer:
FALSIFIABLE IS *DOWNARROW
Aloe vera gel can heal wounds by boosting cell renewal.
Drinking aloe juice can reduce the risk of lung cancer.
NON-FALSIFIABLE IS *DOWNARROW*
Aloe vera gel is the best natural skin moisturizer.
Aloe vera juice tastes better than carrot juice.
Explanation:
yes
Determine which elements or compounds are products in the
follow reaction equation:
Answer: D is the answer since it is the product of this equation
Explanation: HOPE I AM RIGHT AND IT HELPS!!!
need more explanation feel free to comment in the comment box
Which we events will happen if more H, and t, are added to this reaction
when it is in equilibrium?
A. The rate of the backward reaction will increase
The rates of formation of He and I will increase
0. The rate of the forward reaction will increase
D. The rate of formation of HI will increase
Answer:
its is letter c is your answer
Explanation:
I hope this help
Balance the following chemical equations.
Fe + H2S04 ------->Fe2(SO4)3 + H2
C2H6 + O2-------> H2O + CO2
KOH + H3PO4 ------->K3PO4 + H2O
SnO2 + H2-------> Sn + H2O
NH3 + O2 ------->NO + H2O
KNO3 + H2CO3-------> K2CO3 + HNO3
B2Br6 + HNO3 ------->B(NO3)3 + HBr
BF3 + Li2SO3 ------->B2(SO3)3 + LiF
9. (NH4)3PO4 + Pb(NO3)4-------> Pb3(PO4)4 + NH4NO3
SeCl6 + O2 ------->SeO2 + Cl2
Answer:
fe oo andffffe
aiejand iefjwe
eekkfwefwe f
opw fwfwfew
efefwefwefwi
Explanation:
Write the empirical formula for the hydrated KAl(SO4)2, based on your experimental results and answer to Question 2. Show all work including units.
Hint: if the ratio of moles of H2O to moles of anhydrous KAl(SO4)2 was 4, then the empirical formula would be: KAl(SO4)2•4H2O.
Answer to Question 2:
Ratio of 2:3
Answer:
Therefore mole ratio is [tex]H_{2}O[/tex] : [tex]KAl(SO_{4} )_{2}[/tex] is 12 :1
Empirical formula is [tex]KAl(SO_{4} )_{2}. 12 H_{2}O[/tex].
Explanation:
The chemical formula of a hydrate
Moles of anhydrous [tex]KAl(SO_{4} )_{2}[/tex]
Molar mass of [tex]KAl(SO_{4} )_{2}[/tex] = 258.21 g /mol
Mass of anhydrous [tex]KAl(SO_{4} )_{2}[/tex] = [mass of aluminum cup + alum after 2nd heating] –[ mass of empty cup]
= 3.5 g – 2.4 g
= 1.1 g
Moles of [tex]KAl(SO_{4} )_{2}[/tex]= mass / molar mass
= 1.1 g / 258.21 g per mol
= 0.00426 mol [tex]KAl(SO_{4} )_{2}[/tex]
The mole ratio of the H2O to [tex]KAl(SO_{4} )_{2}[/tex]
Mole ratio = moles of H2O/ moles of [tex]KAl(SO_{4} )_{2}[/tex]
= 0.05 mol H2O / 0.00462 mol [tex]KAl(SO_{4} )_{2}[/tex]
= 11.7
We can round the 11.7 to closest whole number = 12
Therefore mole ratio is [tex]H_{2}O[/tex] : [tex]KAl(SO_{4} )_{2}[/tex] is 12 :1
Empirical formula = [tex]KAl(SO_{4} )_{2}. 12 H_{2}O[/tex]
So we have 12 moles of water as the water of hydration in the empirical formula.
Alum hydrate is that the white crystalline solid after heating it'll start melting due to the water of hydration present in it then again solid will remain within the aluminum cup once all the water is given off within the sort of vapors.
b) if the scholar used 2.20 g of the sample but within the calculation, he started with 2.0 g sample then
when the mass of water is calculated using this data the mass of water is going to be higher therefore it gives more moles of water within the hydrate.
So the final answer is going to be artificially high.
Consider the half reactions below for a chemical reaction.
ZnZn2+ (aq) + 2e
Cu?" (aq) + 2e → Cu(s)
What is the overall equation for this chemical reaction?
Zn(s)+ Cu?* (aq) —>Zn2+ (aq) + Cu(s)
O Zn(s) + Cu2+ (aq) — Cu2+ (aq) + 2e-
O Zn2*(aq) + Cu(s) —> Cu2* (aq) + Zn(s)
O Zn2+ (aq) + 22 —> Cu2(aq) + 2e
Answer:
Option A:
Zn(s) + Cu^(2+) (aq) → Cu(s) + Zn^(2+)(aq)
Explanation:
The half reactions given are:
Zn(s) → Zn^(2+)(aq) + 2e^(-)
Cu^(2+) (aq) + 2e^(-) → Cu(s)
From the given half reactions, we can see that in the first one, Zn undergoes oxidation to produce Zn^(2+).
While in the second half reaction, Cu^(2+) is reduced to Cu.
Thus, for the overall reaction, we will add both half reactions to get;
Zn(s) + Cu^(2+) (aq) + 2e^(-) → Cu(s) + Zn^(2+)(aq) + 2e^(-)
2e^(-) will cancel out to give us;
Zn(s) + Cu^(2+) (aq) → Cu(s) + Zn^(2+)(aq)
phosphorus react with carbon
Answer:
Phosphorus atoms can bond with oxygen atoms to form ester groups. These can bond with carbon atoms, yielding a large number of organic phosphorus chemicals. These are found in many important biological processes
please help me with this
Answer:
a. B
b. C
c. A
d. A
e. B
f. -266
g. B and D
Which of the following are true for an element? (i)Atomic number= number of protons + number of electrons (ii)Mass number = number of protons+ number of neutrons (iii)Atomic mass= number of protons= number of neutrons (iv)Atomic number = number of protons = number of electrons
Answer:
ii and iv
Explanation:
atomic mass is the sum of protons and neutrons
protons ( postively charged) usually have the same number like electrons( negatively charged)
Had beryllium and calcium already been discovered
Answer:
Yes
Beryllium is a chemical element with the symbol Be and atomic number 4. It is a steel-gray, strong, lightweight and brittle alkaline earth metal. ... Notable gemstones high in beryllium include beryl (aquamarine, emerald) and chrysoberyl.
Calcium is a mineral that is necessary for life. In addition to building bones and keeping them healthy, calcium enables our blood to clot, our muscles to contract, and our heart to beat. About 99% of the calcium in our bodies is in our bones and teeth.
Which of the following elements would have the largest electronegativity value?
O cesium
Olithium
O carbon
O sodium
Which particles have about the same mass?
O A. Neutrons and protons
O B. Electrons and protons
O C. Electrons and neutrons
O D. Electrons, neutrons, and protons
SUBMI
Answer:
A
Explanation:
Electrons are significantly smaller than neutrons and protons.
Electrons have a diameter of less than 10^-16 centimeters, whereas protons and neutrons have a radius of about 10^-13 centimeters.
hii pls help me to balance chemical equation
calcium hydroxide + hydrochloric acid ------> calcium chloride + water
Answer:
1 Ca(OH)2 + 2 HCl ---> 1 CaCl2 + 2 H2O
Element 'X' forms a chloride with the formula XCl2, which is a solid with high melting point. X would most likely be in the same group of the periodic table as:
I) Si
2) Al
3) Mg
4) Na
pls pls answer fast
Answer:
Mg
Explanation:
Mg forms 2+ ions and mgcl2 has a melting point over 700°C I believe.
The acid dissociation constant, Ka, of HSO4- is 1.2 × 10-2. What does the Ka value indicate about this compound?
A.
HSO4- is a weak base.
B.
HSO4- is a strong acid.
C.
HSO4- is a weak acid.
D.
HSO4- is a strong base.
Answer:
The answer is HSO4- is a weak acid which will be C
The acid dissociation constant, ka, of HSO4- indicates that it is a strong acid. Details about acid dissociation constant can be found below.
What is acid dissociation constant?The acid dissociation constant denoted by Ka is the measure of the strength of an acid.
The dissociation constant of an acid is used to identify strong acids from their weak counterparts. Strong acids have high Ka values while weak acids have low Ka values.
According to this question, the Ka of HSO4- is 1.2 × 10-², which is quite high.
Therefore, the dissociation constant, ka, of HSO4- suggests that it is a strong acid.
Learn more about acid dissociation constant at: https://brainly.com/question/4363472
#SPJ9
what are some of the uses of halogens?
Answer:
Halogens are used in, water and sanitation, plastics, pharmaceutical, pulp and paper, textile, military and oil industries. Bromine, chlorine, fluorine and iodine are chemical intermediates( bleaching agents and disinfectants). Chlorine is used to purify water. Chlorine also is part of salt, sodium chloride, which is one of the most widely used chemical compounds. Fluorine is used in fluorides, which are added to water supplies to prevent tooth decay.
hopes this helps~
Answer:
What are some uses of halogen elements? Chlorine is used to purify water. Chlorine also is part of salt, sodium chloride, which is one of the most widely used chemical compounds. Fluorine is used in fluorides, which are added to water supplies to prevent tooth decay.
Explanation:
Halogen, any of the six nonmetallic elements that constitute Group 17 (Group VIIa) of the periodic table. The halogen elements are fluorine (F), chlorine (Cl), bromine (Br), iodine (I), astatine (At), and tennessine (Ts). They were given the name halogen, from the Greek roots hal- (“salt”) and -gen (“to produce”), because they all produce sodium salts of similar properties, of which sodium chloride—table salt, or halite—is best known.
Because of their great reactivity, the free halogen elements are not found in nature. In combined form, fluorine is the most abundant of the halogens in Earth’s crust. The percentages of the halogens in the igneous rocks of Earth’s crust are 0.06 fluorine, 0.031 chlorine, 0.00016 bromine, and 0.00003 iodine. Astatine and tennessine do not occur in nature, because they consist of only short-lived radioactive isotopes.
ii.
ci
What is the name of the organic compound
Answer.
Hydrocarbons are compounds that contain carbon and hydrogen only
Explanation:
a. c3H4 methane
b.c3H4.propene
c.c5H8
What is the name of the compound with the formula B2C14?
Answer:
Diboron tetrachloride ---> B2Cl4
How many Calcium (CA) atoms are in carbon tetrachloride
Answer:
5
Explanation:
Carbon tetrachloride has molecular formula as CCl4 , so from this it is evident that there are 4 atoms of Chlorine & 1 atom of carbon is present, in total 5 molecules are present in carbon tetra
Answer:
its 5
Explanation:
write electronic configuration of chlorine in its ionic state?
Answer:
1s2 2s2 2p6 3s2 3p6
Explanation:
Chlorine is a groups 17 element. The halogens for ions by accepting one electron to form univalent negative ions.
Since chlorine normally contains seventeen electrons, the chloride ion consists of eighteen electrons.
Hence the electronic configuration of chlorine ion is; 1s2 2s2 2p6 3s2 3p6.
balance the equation .......qn 5.......help
Answer:
MnO4 + 4 H2C2O4 = Mn + 8 CO2 + 4 H2O
If a quantity of this substance existed as a solid at a pressure of 0.75 atm and a temperature of 50°C, what phase
change(s) would occur if the temperature increased to 500°C?
a. Freezing and deposition
b. Melting and freezing
c. Condensation and sublimation
d. Melting and vaporization
PLZ HELL ME WITH MY WORK
Answer:
Ba
Explanation:
Draw the structure for :
3,3,4-trimethylhex-2-ene
Answer:
answer is in the picture.
Which of the following about a balanced chemical reactions is
NOT true?
O A properly written chemical equation will include the states of matter
for every substance in the reaction.
O The number of atoms of each element must be the same for both
reactants and products.
A balanced chemical equation must follow the Law of Conservation
of Matter
A balanced chemical equation must always include coefficients on
every reactant and product.
Answer:
A balanced chemical equation must always include coefficients on every reactant and product.
Explanation:
A balanced chemical equation does not need to include coefficients on every reactant and product.
For example, below is a balanced chemical equation in which the reactants and the products have no coefficients whatsoever:
NaOH(aq) + HCl (aq) -----> NaCl (s) + H2O (l)
Of course, a properly written chemical equation must include the states of matter of all the substances in the reaction and the number of atoms of each element must balance both in the reactant and product sides of the equation. Generally, a balanced chemical equation must obey the law of conservation of matter which opines that matter can neither be created nor destroyed but can only be converted from one form to another.
Hence, that a balanced chemical equation must always include coefficients on every reactant and product is not true.
Help me please
The options are
A. Translation
B. Rotation
C. Enlargement
D.reduction
Answer:
C. Enlargement
Explanation:
Cuál es tejidos conforman el sistema de tejido fundamental
Explanation:
Los tejidos que conforman el tejido fundamental son los siguientes:
-Parénquima
-Colénquima
-Esclerénquima.
El tejido fundamental constituye la parte principal del cuerpo de la planta porque intervienen en funciones tan importantes para el desarrollo y sostenimiento de la planta como el proceso de la fotosíntesis, el almacenamiento de agua y de nutrientes .
¿Que es bacteria y un virus ?
es para hoy por favor ayúdeme
i) Las bacterias son organismos microscópicos unicelulares que prosperan en diversos entornos. Estos organismos pueden vivir en el suelo, el océano y dentro del intestino humano.
ii) Un virus es un agente infeccioso submicroscópico que se replica solo dentro de las células vivas de un organismo. Los virus infectan todas las formas de vida, desde animales y plantas hasta microorganismos, incluidas bacterias y arqueas.
Rank these solutions from the most alkaline (1) to the least alkaline (5).
What volume of 0.200 M Na2CO3 (Mm = 106 g/mol) solution contains 53.0 g of Na2CO3?
Question 1 options:
0.200 L of solution
0.400 L of solution
0.500 L of solution
1.60 L of solution
2.50 L of solution
Answer:
volume in Liter = 2.50 L
Explanation:
Given:
Na2CO3 = 0.2 M
Molar mass of Na2CO3 = 106 g/mol
Mass of Na2CO3 solution = 53 gram
Find:
Volume of Na2CO3
Computation:
Number of mol of Na2CO3 = (53 g) / (1.06 x 10² g/mol)
Number of mol of Na2CO3 = 0.5 mol
M = Number of mol / volume in Liter
0.2 = 0.5/ volume in Liter
volume in Liter = 0.5 / 0.2
volume in Liter = 2.50 L
How many moles of electrons is required to deposit 5.6g of iron from a solution of iron (2) tetraoxosulphate(6)
Answer:
0.20 mol
Explanation:
Let's consider the reduction of iron from an aqueous solution of iron (II).
Fe²⁺ + 2 e⁻ ⇒ Fe
The molar mass of Fe is 55.85 g/mol. The moles corresponding to 5.6 g of Fe are:
5.6 g × 1 mol/55.85 g = 0.10 mol
2 moles of electrons are required to deposit 1 mole of Fe. The moles of electrons required to deposit 0.10 moles of Fe are
0.10 mol Fe × 2 mol e⁻/1 mol Fe = 0.20 mol e⁻
0.20 mol of electrons is required to deposit 5.6g of iron from a solution of iron (2) tetraoxosulphate(6)
The reduction of iron from an aqueous solution of iron (II).
[tex]Fe^{+2} +2e^{-} \rightarrow Fe[/tex]
The formula for number of moles is as follows:-
[tex]Number \ of \ moles=\frac{Mass}{Molar\ mass}[/tex]
The molar mass of Fe is 55.85 g/mol. The moles corresponding to 5.6 g of Fe are:
[tex]5.6 g \times\frac{1\ mol}{55.85\ g} = 0.10 \ mol[/tex]
2 moles of electrons are required to deposit 1 mole of Fe. The moles of electrons required to deposit 0.10 moles of Fe are:-
[tex]0.10 mol Fe\times\frac{2\ mol\ e^{-} }{1\ mol\ e^{-}} = 0.20 \ mol e^{-}[/tex]
Hence, 0.20 mol of electrons is required to deposit 5.6g of iron.
To know more about:-
brainly.com/question/12513822