please help and give an explanation i don’t get it

Please Help And Give An Explanation I Dont Get It

Answers

Answer 1

The mass (in grams) of water, H₂O produced from 6.00 moles of hydrogen gas, H₂, is 108 g (last option)

How do i determine the mass of water produced?

We'll begin by obtaining the mole of water produced from the reaction. Details below:

2H₂(g) + O₂ -> 2H₂O

From the balanced equation above,

2 moles of H₂ reacted to produce 2 moles of H₂O

Therefore,

6 moles of H₂ will also react to produce 6 moles of H₂O

Finally, we shall determine the mass of water, H₂O produced. Details below:

Molar mass of water, H₂O = 18 g/mol Mole of water, H₂O = 6 molesMass of water, H₂O = ?

Mole = mass / molar mass

6 = Mass of water, H₂O / 16

Cross multiply

Mass of water, H₂O = 6 × 18

Mass of water, H₂O = 108 g (last option)

Learn more about mass produced:

https://brainly.com/question/9526265

#SPJ1


Related Questions

what is the electrostatic potential energy (in joules) between an electron and a proton that are separated by 53pm

Answers

The electrostatic potential energy between an electron and a proton that are separated by 53pm is 4.27 × 10^-18 J.

Calculation of electrostatic potential energy?

The electrostatic potential energy between two charged particles can be calculated using the

formula U = k*q1*q2/r,

where:

k is the Coulomb constant,

q1 and q2 are the charges of the two particles, and

r is the distance between them.

In this case, we have q1 = -1.60*10^-19 C (charge of the electron), q2 = 1.60*10^-19 C (charge of the proton), and r = 53 pm = 5.3*10^-10 m. Plugging these values into the formula, we get:

U = (8.99*10^9 N m2/C2)*(-1.60*10^-19 C)*(1.60*10^-19 C)/(5.3*10^-10 m)

U = 4.27 × 10^-18 J

Learn more about  electrostatic potential energy here:

https://brainly.com/question/26978411

#SPJ1

Suppose the molar solubility of Ag2CrO4 in water is x M, while its molar solubility in a 0.005 M solution of Na2CrO4 is y M. Which of the following is correct?A) It can't be determined.B) x < yC) x > yD) x = y

Answers

When Ag2CrO4 is dissolved in a Na2CrO4 solution, its molar solubility decreases. In other words, x > y.The correct answer is c.

The molar solubility is the quantity of a solute (in moles) that can be dissolved per liter of solution (in liters) at equilibrium. It is a measure of the solubility of the solute in the solvent.

Solubility is a measure of a compound's ability to dissolve in a particular solvent at a particular temperature and pressure.According to the common ion effect, the presence of a common ion decreases the solubility of a substance in solution.

Because Na2CrO4 and Ag2CrO4 are both soluble in water, they will dissociate into their constituent ions when dissolved in water according to the following reactions:Na2CrO4 → 2Na+ + CrO42-Ag2CrO4 → 2Ag+ + CrO42-When Ag2CrO4 dissolves in a Na2CrO4 solution, however, the addition of the common chromate ion, CrO42-, will push the above equilibrium to the left, resulting in a decrease in the amount of Ag2CrO4 that dissolves.

As a result, when Ag2CrO4 is dissolved in a Na2CrO4 solution, its molar solubility decreases. In other words, x > y.

Learn more about molar solubility here:

brainly.com/question/28170449

#SPJ11

A chemist heats the block of gold as shown in the interactive, then places the metal sample in a cup of oil at 25.00 °C instead of
a cup of water. The temperature of the oil increases to 26.52 °C. Calculate the mass of oil in the cup. The specific heat of gold is
0.129 J/g °C and the specific heat of oil is 1.74 J/g °C.
moil =
$
4
d
%
5
<
6
MacBook Air
FG
&
7
3
F7
00 *
8
DII
FB
9
DD
F9
O
4
F10
4
F11
+ 11
Do
8
√3)
F12

Answers

FCC iDisk ldkkdbd oaks

In an open manometer with an atmospheric pressure of 104 kPa, the mercury level in the arm connected to the gas is 150 mm Hg lower than in the arm connected to the atmosphere. What is the pressure of the gas sample?​

Answers

The pressure of the gas sample is 104
kPa + 150 mm Hg = 254 kPa.

Match the terms to the appropriate definitions and/or descriptions

HELP!!

Answers

Absolute dating:

Using the abnormal isotopes inside specimens and using half-life calculations to learn the absolute dates.Carbon 14 datingRadiometric dating

What matches other terms?

Zircon: A crystal that helps determine the age of an igneous intrusion or layer of a very old specimen.

Meteorites: Help to determine the age of the universe because it is assumed they were around the same time as the Earth was formed

Compression melting: Was likely formed by tectonic and volcanic events

Relative dating: When scientist are simply looking for a logical sequence of events

An igneous intrusion: A crystal that helps determine the age of an igneous intrusion or layer of a very old specimen

Unconformity: When layers are missing from one area to another because of erosion of exposed parts that occurred because of an earthquake or other geological event.

Index fossils: If a fossil is determined to be a certain age, the layer it was found in is likely of the same age.

The Grand Canyon: Was likely entirely formed by a river

Iguazu Falls in Argentina: Was likely formed by glacial forces

Yosemite Valley: The lowest layer of glaciers that lubricate and allows a glacier to move

The statement "An igneous intrusion is always younger than all the layers it cuts through" is true.

The statement "Using radiometric methods to find the approximate age of a layer or fossil" is true.

learn more about Radiometric dating: https://brainly.com/question/8831242

#SPJ1

The text format of the question goes thus:

Absolute dating

Zircon

Meteorites

Compression melting

Relative dating

An igneous intrusion

Unconformity

Index fossils

The Grand Canyon

Iguazu Falls in Argentina

Yosemite Valley

Carbon 14 dating

Radiometric dating

a. was kkely formed by glacial forces

b. is always younger than all the layers it cuts through

Using the abnormal isotopes inside specimens and using half-life calculations to learn the absolute dates.

d. If a fossil is determined to be a certain age, the layer it

was found in is likely of the same age.

e. Using radiometric methods to find the approximate age

of a layer or fossil

was likely entirely formed by a river

When layers are missing from one are to another because of erosion of exposed parts that occurred because of an earthquake or other geological event.

h was likely formed by tectonic and volcanic events

To learn absolute date of a more recent item.

J. the lowest layer of glaciers that lubricate and allows a

glacier to move k. A crystal that helps determine the age of an igneous intrusion or layer of a very old specimen

When scientist are simply looking for a logical sequence

of events

m. Help to determine the age of the universe because it is

assumed they were around the same time as the Earth

was formed

what needs to increase in order to make a substance more soluble?

Answers

By supplying more energy to counteract intermolecular interactions and increasing contact between solvent and solute, raising temperature, agitation, surface area, or lowering particle size can enhance solubility.

A substance's solubility refers to its capacity to dissolve in a solvent. Intermolecular forces between the solute particles are broken during the dissolving process, and new connections with the solvent molecules are created. Solubility can be raised by adding extra energy to break through these intermolecular connections. Although agitation and expanding surface area improve the contact between the solvent and solute, rising temperature releases more thermal energy to break the intermolecular interactions. By increasing surface area per unit volume, particle size reduction increases interaction with the solvent. Moreover, by giving the solute additional solvation sites, more solvents or surfactants can be added to increase solubility.

learn more about solubility here:

https://brainly.com/question/29857840

#SPJ4

what combination would dissolve a solid solute the fastest? question 4 options: no heat, no stirring high temperature, no stirring high temperature, stirring cube shape, no heat

Answers

Out of the given options, the combination that would dissolve a solid solute the fastest is high temperature with stirring.

What is solute?

A substance that is dissolved in a solvent to make a solution is called a solute.

What is a solution?

A solution is a homogeneous mixture composed of a solute dissolved in a solvent.

What is solubility?

Solubility is the capacity of one substance to dissolve in another substance. Factors such as temperature, pressure, and the solvent's chemical structure influence solubility.

Therefore, it can be inferred that out of the given options, the combination that would dissolve a solid solute the fastest is high temperature with stirring. High temperature helps to dissolve the solid solute by increasing the kinetic energy of the molecules. Stirring ensures the solute is evenly dispersed in the solvent and provides a fresh surface for the solvent to attack.

Learn more about solute here: https://brainly.com/question/25326161.

#SPJ11

19. which sample, when dissolved in 1.0 liter of water, produces a solution with the lowest boiling point?

Answers

The sample with the lowest boiling point when dissolved in 1.0 liter of water is sodium chloride (NaCl). Sodium chloride is a common salt compound which, when dissolved in water, lowers the boiling point of the solution.

To calculate the boiling point, use the following equation: Boiling Point = K b x m, where Kb is the ebullioscopic constant and m is the molality of the solution.

The ebullioscopic constant for sodium chloride is 0.51 K kg mol-1 and the molality is equal to the number of moles of solute divided by the volume of the solution. Therefore, for a 1.0 liter solution, the boiling point of the solution would be 0.51 K kg mol-1 x 0.78 moles/1.0 liter = 0.398 K kg mol-1.

Learn more about boiling point: https://brainly.com/question/40140

#SPJ11

Only the first and second choices are correct.
Polysaccharides always:
Please choose the correct answer from the following choices, and then select the submit answer button.
are a string of three or more sugar molecules.
are polymers.
contain lipids.
All of the above are correct.
Only the first and second choices are correct.

Answers

The correct option will be only the first and second choices are correct.

What are Polysaccharides?

Polysaccharides, in general, are carbohydrates that contain a large number of monosaccharide units bonded by glycosidic bonds. Polysaccharides are the polymers in which the monomer is a sugar molecule. Polymers are large molecules made up of many smaller molecules connected together.

In this case, the smaller molecules are monosaccharides, which are combined to form polysaccharides. Polysaccharides are formed when three or more monosaccharides join together to form a chain.

The correct option is that only the first and second choices are correct.

Learn more about Polysaccharides here:

https://brainly.com/question/780562

#SPJ11

."Scientists believe the amygdala is responsible for emotion."
What is the best definition for responsible as it is used in the previous
quote?


A Liable to be called on to answer
B. Having the job or duty
C. Politically answerable
D. Able to answer for one's conduct and obligations

Answers

D. Able to answer for one's conduct and obligations

What is the amygdala?

The amygdala is a pair of almond-shaped structures located in the brain's temporal lobes. It is part of the limbic system, which is involved in the processing of emotions and memory. The amygdala is involved in the formation of memories associated with emotional events, as well as the reaction to those memories.

The amygdala also plays a role in the regulation of the body's fight-or-flight response, which is the autonomic nervous system's response to danger or perceived danger. It is thought to be involved in the formation of fears and phobias, as well as the development of aggressive behaviors. In addition, the amygdala is believed to be involved in the processing of social cues, such as facial expressions and body language.

Learn more about the amygdala here:

https://brainly.com/question/24171355

#SPJ1

Ian noticed that during a reaction the beaker containing his reactants got very cold. What kind of reaction is this?

Answers

Answer: Endothermic Reaction

Explanation:

It is Endothermic Reaction because, during Endothermic reaction, heat is absorbed from the surrounding. It is cold because, due to the reaction, the heat is absorbed, lowering the temperature of the mixture in the beaker, making the reactants cold.

Review these definitions, and make sure to not get confused between Exothermic and Endothermic reactions.

Exothermic Reaction: A chemical reaction where energy is released.

Endothermic Reaction: A chemical reaction where energy is absorbed from the environment.

The molecules of a substance diffuse through a medium. The diffusion is one-dimensional. After a time to the molecules have diffused a distance Ro. What distance will the molecules have diffused after a time of 3'To? a. 2.45*Ro b. 3.00*Ro c. 4.24.Ro d. 1.73*Ro e. 9,00*Ro

Answers

The distance molecules diffuse in a medium is an example of diffusion after a tie of 3'To is 1.73 × Ro. Thus, the correct option is D.

What is diffusion?

Diffusion is a physical process that occurs when molecules in a substance move from a region of high concentration to a region of lower concentration until a uniform concentration is obtained. The molecules continue to move even after the concentration is uniform, but at a slower rate.

One-dimensional diffusion is a special case of diffusion that occurs in a straight line, with no other directions being affected. It only occurs in one direction, resulting in a change in concentration. For instance, diffusion across a flat surface. Formula to calculate distance traveled in time T using one-dimensional diffusion is:

Ro² = 2D × T

where, Ro is the distance traveled by the molecules in time T, and D is the diffusion coefficient of the substance in the medium.

The distance that the molecules will have diffused in a time of 3'To will be: Ro×√3. Using the formula of one-dimensional diffusion and solving for the distance Ro, we have:

Ro² = 2D × To

Solving for Ro, we get: Ro = √2D × To

After a time of 3'To, the molecules would have traveled a distance of Ro × √3.

Therefore, the correct option is D.

Learn more about Diffusion here:

https://brainly.com/question/14852229


#SPJ11

A solution contains a total concentration of molecules [A]tot of 5.345 x 10-5 mol/l and a total concentration of molecules [B]tot of 1.245 x 10-4 mol/l. The dissociation constant for the complex AB is 2.208 x 10-6 mol/l. Part A - Concentration of AB in equilibrium Determine the equilibrium concentration [AB] of the heterodimeric complex AB formed by the molecules A and B in the solution.

Answers

The equilibrium concentration [AB] of the heterodimeric complex AB formed by the molecules A and B is 0.003026 mol/l.

Why equilibrium concentration is 0.003026 mol/l.?

The equilibrium concentration of the heterodimeric complex AB formed by the molecules A and B in the given solution can be determined using the dissociation constant for the complex AB and the total concentrations of molecules A and B provided in the problem statement.

The dissociation constant for the complex AB is given by Kd = [A][B]/[AB]

where [A] and [B] are the concentrations of the individual molecules A and B and [AB] is the concentration of the complex AB at equilibrium.

Rearranging this equation gives [AB] = [A][B]/Kd.

Substituting the given values of [A], [B], and Kd in the above equation,

we get: [AB] = (5.345 x 10⁻⁵mol/l) x (1.245 x 10⁻⁴mol/l)/(2.208 x 10⁻⁶mol/l)

[AB] = 0.003026 mol/l

Therefore, the equilibrium concentration [AB] of the heterodimeric complex AB formed by the molecules A and B in the given solution is 0.003026 mol/l.

Learn more about equilibrium concentration

brainly.com/question/13043707

#SPJ11

The model for the atom that was understood when Bohr made his contributions was called the:
Select the correct answer below:
planetary model
plum pudding model
solid sphere model
quantum model

Answers

The model for the atom that was understood when Bohr made his contributions were called the option (A) Planetary Model.

What is the Bohr's Model?

Bohr's model, also known as the Planetary model, is a basic model of the atom that explains the atomic structure. The atomic nucleus is in the center of the atom, with electrons moving in circular orbits about it at different energy levels.

The model is called the planetary model because it resembles the planets in the solar system revolving around the sun. The electrons are arranged in concentric circles around the nucleus, with each circle corresponding to a specific energy level.

In summary, when Bohr made his contributions, the model for the atom that was understood was called the Planetary Model.

To know more about the planetary model:

https://brainly.com/question/30790603

#SPJ11

Write a chemical equation for HNO3(aq) showing how it is an acid or a base according to the Arrhenius definition.Express your answer as a chemical equation. Identify all of the phases in your answer.Part CWrite a chemical equation for HF(aq) showing how it is an acid or a base according to the Arrhenius definition.Express your answer as a chemical equation. Identify all of the phases in your answe

Answers

Part A The chemical equation for HNO3  showing it is acid is:-

HNO3 (aq) → H+ (aq) + NO3- (aq)

The phases are HNO3 (aq) = aqueous solution, H+ (aq) = aqueous solution and NO3- (aq) = aqueous solution.

Part B The chemical equation for HF showing it is acid is:-

HF (aq) → H+ (aq) + F- (aq)

The phases are HF (aq) = aqueous solution, H+ (aq) = aqueous solution, and F- (aq) = aqueous solution.

HNO3 (aq) is an acid according to the Arrhenius definition because the chemical substance HNO3 (nitric acid) dissociates in an aqueous solution to release hydrogen ions (H+).

HF (aq) is an acid according to the Arrhenius definition because the chemical substance HF (hydrofluoric acid) dissociates in an aqueous solution to release hydrogen ions (H+).

Learn more about Arrhenius:

https://brainly.com/question/14739712

#SPJ11

isotopes are different forms of an element that have different ______.

Answers

Isotopes are different forms of an element that have different atomic masses. The number of protons in each atom of an element will remain the same, but isotopes of an element will have different numbers of neutrons, leading to different atomic masses.

Isotopes are different forms of an element that have different numbers of neutrons in their nuclei. The number of neutrons in an atom can vary from one to several, depending on the element. Isotopes are atoms of an element that differ in the number of neutrons present in their nucleus. The atomic number of an element is determined by the number of protons present in the nucleus. However, the isotopes of the same element differ in their mass numbers. The atomic mass of an element is determined by the number of protons and neutrons present in the nucleus.

The atomic number of an atom is the sum of the number of protons in the nucleus and the number of electrons in a neutral (non-ionized) atom. Each atomic number designates a particular element, but not an isotope; the number of neutrons in an atom of a given element can vary widely. Each isotope of an element has a particular mass number, which is determined by the number of nucleons (both protons and neutrons) in the nucleus. Therefore, the isotopes of an element have different atomic masses.

Isotopes can be radioactive or stable, depending on the number of neutrons present in the nucleus. For instance, carbon-14 is a radioactive isotope of carbon, while carbon-12 is a stable isotope.

For more such questions on Isotopes , Visit:

https://brainly.com/question/14220416

#SPJ11

Chlorate is an oxyanion. It contains a single covalent bond between oxygen and chlorine atoms. The ion also have an ovaral negative charge. Show by calculation that the percentage by mass of chlorate 1 in calcium chlorate 1 is greater than the percentage by mass of chlorate 1 ions in Sodium chlorate​

Answers

Percentage by mass of chlorate 1 in calcium chlorate 1 is greater than the percentage by mass of chlorate 1 ions in Sodium chlorate.

What is an oxyanion? Give an example of an oxyanion.

An oxyanion is a polyatomic ion that contains at least one oxygen atom and one or more other elements, typically nonmetals. Examples of oxyanions include nitrate (NO3-), sulfate (SO42-), and phosphate (PO43-).

The molecular formula for calcium chlorate is Ca(ClO3)2, and the molecular formula for sodium chlorate is NaClO3.

To calculate the percentage by mass of chlorate 1 in calcium chlorate 1, we need to calculate the molar mass of Ca(ClO3)2 and the molar mass of chlorate 1.

Molar mass of Ca(ClO3)2 = 1 mol Ca + 2 mol ClO3

= 40.08 g/mol Ca + 2(35.45 g/mol Cl + 3(16.00 g/mol O))

= 238.06 g/mol

Molar mass of chlorate 1 = 35.45 g/mol Cl + 3(16.00 g/mol O)

= 99.45 g/mol

Now, we can calculate the percentage by mass of chlorate 1 in calcium chlorate 1:

% by mass of chlorate 1 in calcium chlorate 1 = (2 mol ClO3 x 99.45 g/mol) / (1 mol Ca(ClO3)2 x 238.06 g/mol) x 100%

= 83.3%

To calculate the percentage by mass of chlorate 1 in sodium chlorate, we only need to calculate the molar mass of NaClO3 and the molar mass of chlorate 1.

Molar mass of NaClO3 = 22.99 g/mol Na + 35.45 g/mol Cl + 3(16.00 g/mol O)

= 106.99 g/mol

Molar mass of chlorate 1 = 35.45 g/mol Cl + 3(16.00 g/mol O)

= 99.45 g/mol

Now, we can calculate the percentage by mass of chlorate 1 in sodium chlorate:

% by mass of chlorate 1 in sodium chlorate = (1 mol ClO3 x 99.45 g/mol) / (1 mol NaClO3 x 106.99 g/mol) x 100%

= 92.9%

Learn more about calcium chlorate here:

https://brainly.com/question/5923839

#SPJ1

The epithelial cells of the proximal convoluted tubule are adapted for reabsorption by: a. having thin walls. b. having rugae folds that increase surface area. c. secreting enzymes that activate absorption of substances. d. having microscopic projections called microvilli.

Answers

Answer: d. possessing tiny protrusions known as microvilli. The proximal convoluted tubule's epithelial cells have microvilli on their surface, which increases their surface area and improves.

the efficiency of reabsorption of chemicals from the filtrate back into the circulation. The cells do not release enzymes to promote absorption, and the rugae folds and thin walls are not adaptations for reabsorption. The proximal convoluted tubule's epithelial cells are in charge of reabsorbing vital components from the glomerular filtrate, including glucose, amino acids, and electrolytes. Many microvilli, which are tiny finger-like projections on the surface of the cell that enhance the surface area accessible for reabsorption, are present in the cells, which enable them to perform this role. This modification makes it possible for chemicals to be reabsorbted more effectively as they move through the tubule. The rugae folds and thin walls, on the other hand, have little impact on reabsorption in the proximal convoluted tubule. In this region of the nephron, reabsorption likewise does not include enzyme secretion.

learn more about microvilli here:

https://brainly.com/question/30871186

#SPJ4

The student decides to determine the molarity of the same Na2CO3 solution using a second method. When Na2CO3 is dissolved in water, CO3 ^2−(aq) hydrolyzes to form HCO3 ^−(aq), as shown by the following equation.CO3 2−(aq) + H2O(l)  HCO3 −(aq) + OH−(aq) Kb = [HCO3^ -][OH^- ]/ [CO3^2- ] - - - = 2.1 × 10^−4explain how the student could use the measured value in part (f)(i) to calculate the initial concentration of co3-2 (aq). (do not do any numerical calculations.)

Answers

To calculate the initial concentration of CO32- (aq), the student can use the measured value from part (f)

(i) to calculate the equilibrium concentration of HCO3- (aq) and OH- (aq)

according to the equilibrium expression: Kb = [HCO3-]eq [OH-]eq / [CO32-]eq.

The student can then use the equilibrium concentrations to calculate the initial concentration of CO32- (aq) by solving the equilibrium expression for [CO32-]eq.

The initial concentration of CO32- (aq) is equal to the sum of the equilibrium concentrations of HCO3- (aq) and OH- (aq).

to know more about equilibrium refer here:

https://brainly.com/question/30807709#

#SPJ11

Draw the hydrogen bonding of G-C and A-T pairs by hand. For each hydrogen bond, please point out which are hydrogen bond donors, and which are hydrogen bond acceptors.

Answers

Everyone agrees that guanine-cytosine (GC) base pairs have three hydrogen bonds, but adenine-thymine (AT) base pairs only have two.

What do adenine's hydrogen bond acceptors and donors look like?

Testing the significance of the these two polar organisations together necessitates an analogue whereby both are replaced to nonpolar functionality, preferably maintaining steric dimensions and forms as closely as possible. Adenine carries a hydrogen - bonding acceptor (N1) as well as a donor (NH2) along its Watson-Crick base pairing edge.

What do donors and acceptors of cytosine hydrogen bonds do?

Three hydrogen bonds hold guanine-cytosine base pairs, often known as GC base pairs, together. The bases are marked with the names of the hydrogen - bonding donors and recipients. The hydrogen - bonding donors all are NH groups. Nitrogen and oxygen atoms with a single pair of electrons can act as hydrogen bond acceptors.

To know more about adenine-thymine visit:

https://brainly.com/question/15305540

#SPJ1

An amine that is insoluble in water can be made to dissolve by adding it to an aqueous solution of Select one: O a. HCI O b. NaOH O c. an amide O d. none of the above; it can't be made water soluble

Answers

An amine that is insoluble in water can be made to dissolve by adding it to an aqueous solution of NaOH.

Therefore, option b. NaOH is correct option.

An amine is an organic compound with the formula RNH2 or R2NH or R3N, where R is an alkyl or aryl group. Amines are a type of derivative of ammonia, with one or more hydrogen atoms replaced by organic substituents.

Amines are classified as primary, secondary, or tertiary depending on the number of substituents attached to the nitrogen atom. Furthermore, they are weak bases, with aqueous solutions having pH values greater than 7 because of the presence of the amino group. When amines dissolve in water, they can act as either Bronsted-Lowry bases or Lewis bases. However, most amines are insoluble in water.Water-soluble amines Amines, despite being basic compounds, are often insoluble in water, which is a polar solvent.

As a result, they may be made water-soluble by reacting with acids. For instance, when an amine is added to an aqueous solution of hydrochloric acid, the amine ionizes and dissolves in the acidic solution. Water-soluble salts, such as ammonium chloride, are formed. Other acid-based techniques for making amines water-soluble include reacting them with sulfonic acids and oxoacids. Amines with low molecular weight are also soluble in water because they can form hydrogen bonds with water molecules.Solubility in water may be achieved by adding an amine to an aqueous solution of NaOH, which serves as a base, neutralizing the amine and making it soluble. Water-insoluble amines are converted to water-soluble compounds when they react with NaOH.

for such more question on amine

https://brainly.com/question/9631835

#SPJ11

Please Help me with this question, No.4

Answers

17.0 g of Al₂O₃ forms from 16 g of O₂ and excess Al ,and when the molar mass of  Al₂O₃ is 102 g/mol.

What is molar mass?

Molar mass is the mass of one mole of a substance. It is usually expressed in units of grams per mole (g/mol). For example, the molar mass of carbon is 12.01 g/mol, which means that one mole of carbon has a mass of 12.01 grams. Molar mass is useful in chemistry because it allows us to convert between mass and moles of a substance, which is important for many chemical calculations.

The molar mass of  Al₂O₃ is 102 g/mol, which means that for every 102 g of  Al₂O₃ produced, 3 × 32 g (or 96 g) of O₂ is consumed.

We can use this ratio to find the mass of  Al₂O₃ formed from 16 g of O₂:

96 g of O₂ produces 102 g of  Al₂O₃

1 g of O₂ produces (102 g / 96 g) of Al₂O₃

16 g of O₂ produces (102 g / 96 g) × 16 g = 17.0 g of  Al₂O₃

To know more about Molar mass, visit:

https://brainly.com/question/22997914

#SPJ1

what the deffinition of structural formula?

Answers

Structural formula: Definition: A structural formula is a molecular representation that depicts the relationship between atoms or functional groups in a chemical compound. It's also known as a chemical formula or molecular formula.

Structural formulas provide a more detailed view of the molecular structure than empirical formulas, which only show the simplest ratio of atoms in a compound.

The structural formula also shows the spatial arrangement of atoms and groups in a compound.

There are two types of structural formulas: condensed structural formulas and Lewis structures.

Condensed structural formulas provide a concise representation of the molecular structure by eliminating most of the bonds and functional groups present in a compound.

The Lewis structure, on the other hand, shows the bonding pairs and lone pairs of electrons present in a molecule.

Structural formulas are critical in chemical analysis, particularly in organic chemistry, where they aid in the identification and characterization of chemical compounds.

These formulas help to explain the chemical properties and behavior of compounds, making them useful in drug development, food production, and other industries.

For similar question on structural formula.

https://brainly.com/question/26388921

#SPJ11

Select all of the following molecules that contain stereocenters.-alkene with H wedges and CH3 dash-both 1,2-dimethylcyclohexane-cyclohexane with wedge-dash methyl

Answers

The stereocenter-containing molecule is:

1,2-dimethylcyclohexane (both carbons at position 1 and 2 are stereocenters as they have four distinct substituents connected to them)

(both carbons at position 1 and 2 are stereocenters as they have four different substituents attached to them)

Stereocenters are absent from the other compounds that were listed. Because the double bond does not include any substituents that are distinct from one another, the alkene with H wedges and the CH3 dash does not have stereocenters. As all of the carbons in cyclohexane are symmetric and do not have four separate substituents connected to them, the cyclohexane with wedge-dash methyl likewise lacks stereocenters., the only molecule in the list that contains stereocenters is 1,2-dimethylcyclohexane.

learn more about stereocenter-containing here:

https://brainly.com/question/23096013

#SPJ4

which property is a main difference between a nucleic acid and a carbohydrate?

Answers

The main difference between nucleic acids and carbohydrates is that nucleic acids are made up of nucleotides, while carbohydrates are made up of monosaccharides.

Therefore, the property that distinguishes nucleic acids from carbohydrates is their composition of nucleotides, which are the basic structural units of nucleic acids.

What are nucleic acids?

Nucleic acids are the biomolecules that encode and transmit genetic information in cells.

They are primarily composed of carbon, nitrogen, oxygen, and phosphorus, and are formed by polymerization reactions in which nucleotides are joined by phosphodiester bonds to form polynucleotide chains.

What are carbohydrates?

Carbohydrates are organic compounds composed of carbon, hydrogen, and oxygen, with the general formula CnH2nOn.

They are classified based on the number of monosaccharide units they contain, with monosaccharides being the simplest and most basic carbohydrate units.

Carbohydrates serve as a source of energy and a structural component in living organisms.

For similar question on nucleic acids.

https://brainly.com/question/12206202

#SPJ11

What element from space is pulled by gravity and turn into a protostar?

Answers

Elements from space that are pulled by gravity and turn into a protostar are mostly made up of hydrogen.

Hydrogen is the most abundant element in the universe and is present in large quantities in space. When gravity pulls together a large amount of hydrogen gas and dust, it can create a protostar. As the hydrogen particles come together, they begin to heat up due to the increased pressure and eventually, the temperature and pressure become so great that nuclear fusion can occur, creating a fully-fledged star. Therefore, the process of star formation is primarily driven by the gravitational attraction between hydrogen atoms. Other elements such as helium, carbon, and oxygen may also be present in space, but their role in star formation is typically secondary.

To know more about hydrogen click here:

brainly.com/question/31018544

#SPJ4

Read through each scenario. Under the scenario, write which lab safety rule is being broken.

Answers

Explanation:

1. Carlos is using unknown chemicals, which is breaking the rules that state: "Treat every chemical hazardous" and "No chemical should be taken without proper authorisation".

2. Jane doesn't know where the eye-wash station is, so she is breaking Rule #1: "Know locations of laboratory safety showers, eyewash stations, and fire extinguishers. The safety equipment may be located in the hallway near the laboratory entrance."

3. Harry has broken the rule that says that "No horseplay will be tolerated." He has turned on the hot plate without instruction.

4. Brent is eating in class. Eating in laboratories where hazardous materials are present is prohibited, yet he still eats a bagel. He is at risk of food poisoning.

5. Sniffing or tasting chemicals can be dangerous or even deadly as the vapours or fumes can contain traces of unknown toxins.

6. She should be more careful, and according to lab safety rules, she should put her bag in the designated areas and work independently unless she is told by her instructor to do otherwise.

7.  Rachel should dress for the lab. If she doesn't and her clothes react badly to the chemicals, it would pose serious health problems.

8. I don't know about this question.

9. Water can act as a reactant, so the chemical in the sink may damage the lab or outside pipes if corrosive. Experiments should be left in the lab unless told to do otherwise by the instructor.

10. Clean up at the end of lab. In this situation, Diana and Mike didn't clean up thoroughly, which can damage their bench top.

11. Jake is performing experiments without permission. He may become a threat to himself if his body gets contaminated.

12. The experiments wouldn't be conducted correctly, which may contaminate the students around them or damage the lab. Heather and Jennifer might pose a threat to the lab.

13. Again, tasting or smelling lab materials are strictly prohibited. Rebecca  may harm her digestive system if she tries an unknown salt.

14. Unwanted reactions may occur, and  the result might be acidic, corrosive, contaminate the surrounding area or discolour some places.

15. Because if we do not follow procedures and rule, we may damage some tools or fellow students.

Which layers of the stem are made of parenchyma cells? cortex and pith epidermis sclerenchyma epidermis and cortex.

Answers

The cortex and pith layers of the stem are made up of parenchyma cells. These cells are responsible for storing and transporting nutrients and water throughout the plant.

Two significant plant stem layers are the cortex and pith. The pith is found at the stem's centre, while the cortex is situated in between the epidermis and the vascular tissue. Parenchyma cells, which are the most prevalent and adaptable form of plant cell, make up both of these layers. Large vacuoles and thin cell walls are characteristics of parenchyma cells, which may perform a variety of tasks include photosynthesis, water and nutrient transport, and storage. The flow of water and nutrients between the roots and leaves in stems is especially dependent on the parenchyma cells in the cortex and pith.

learn more about cortex  here:

https://brainly.com/question/29342434

#SPJ4

Enzyme A has a very broad pH optimum and exhibits the same catalytic activity at pH 6.5, as at pH 8.5. However, a competitive inhibitor, X, is effective at pH 6.5, but not at pH 8.5. Explain this observation. NOTE: Your answer must include potential effect(s) of pH 8.5 on X.

Answers

Enzyme A has a broad pH optimum, which means that it is able to function at a wide range of pH levels. Its catalytic activity is the same at pH 6.5 as it is at pH 8.5. A competitive inhibitor, X, is able to stop the enzyme from functioning at pH 6.5, but not at pH 8.5. This is because the environment at pH 8.5 is different from that at pH 6.5, and the pH 8.5 environment is not conducive for X to interact with the enzyme and block it from functioning.

At pH 8.5, the inhibitor X is less active because the higher pH causes the inhibitor to become more positively charged, thus making it less able to bind to the active site of the enzyme. Furthermore, the increased pH causes the enzyme to become more positively charged, reducing the electrostatic attraction of the inhibitor. As a result, the enzyme is able to function at pH 8.5, even in the presence of the inhibitor X.

In summary, the broad pH optimum of enzyme A means that it can remain active at both low and high pH values, while the competitive inhibitor X is only active at lower pH levels due to its reduced ability to interact with the enzyme at higher pH.

To know more about competitive inhibitor visit:-

https://brainly.com/question/30837079

#SPJ11

mpirical formula for a compound which contains 0.0134 g of iron, 0.00769 g of sulfur and 0.0115 g of oxygen

Answers

The empirical formula for a compound which contains 0.0134 g of iron, 0.00769 g of sulfur and 0.0115 g of oxygen is FeS2O3.

First determine the ratio of each element. Divide the mass of each element by its atomic weight and then divide the results by the smallest value obtained.

The atomic weights are: Fe=55.845, S=32.065 and O=16.00. Dividing the mass of each element by its atomic weight gives the following ratios: Fe=0.0240, S=0.0024 and O=0.0072.

Dividing the ratios by the smallest value (0.0024) gives us 10, 1 and 3 respectively. This means that the empirical formula is Fe10S1O3.

We must divide all values by the highest common factor, which in this case is 2. This gives us Fe5S1/2O3/2 or FeS2O3.

Therefore, the empirical formula for a compound which contains 0.0134 g of iron, 0.00769 g of sulfur and 0.0115 g of oxygen is FeS2O3.

to know more about empirical formula refer here:

https://brainly.com/question/14044066#

#SPJ11

Other Questions
Calculate the annual growth rate of nominal GDP in the following examples: Nominal GDP in 1930: $97 billion. Nominal GDP in 1931: $84 billion. Nominal GDP in 1931: $84 billion. Nominal GDP in 1932: $68 billion. Nominal GDP in 2000: $9,744 billion. Nominal GDP in 2001: $10,151 billion. salespeople who can develop a sales proposal that contains specific information about the return on investment are more likely to get a favorable response from key decision makers. (true or false) Read this passage. Select the expanded sentence in this passage. The bullet train left the train station. As it rounded the first corner, it picked up speed. Quickly the speedy train moved toward its destination. Passengers inside the train ate tea and cookies. As it rounded the first corner, it picked up speed. Passengers inside the train ate tea and cookies. Quickly the speedy train moved toward its destination. The bullet train left the train station Im the forest there were lions and tigers and bears the ratio of lions to tigers was 3 to 2 the ratio of tigers to bears was 3 to 4 if there were 9 lions how many bears were there The angle of elevation of the top of a flag-pole from a point on level ground is 30 degrees. From another point on the ground 20m nearer the flag-pole, the angle of elevation is 60 degrees. Calculate the height of the flag pole identify a true statement about community policing. finally, why were certain northern cities the primary destination for african american during the great migration? a component with a lower flavor threshold will make a bigger contribution to the character of the beer, true or false? Study with and memorize flashcards containing terms like Which of the following is the foundation of most ethical decisions in psychology? Which option lists the sequence of events in the cell-signaling process in the correct order? reception, signal transduction, and resposne. 1. Find the sine of angle in the triangle below.38 In a figure skating compotion each skater receives score from eight judges. A skater has a mean (average) score of 7. 25 points. Write an equation to find the skaters total scores s Can anyone please help with this math problem? Thanks! Why is the Japanese language losing all its vocabulary and how is this affecting its stauts (Someone please give me a brainly answer in 250 words) How many moles are in 3.19 1016 molecules of NOs? when considering the different types of programs utilized for gaining body weight, which of the following is true In triangle ABC, AB = (x + 2) cm, AC = (x + 1) cm and BC = x cm.Given that cos BAC=3/4 , find the value of x. Danielle is eager to earn an A average in her college courses this semester because her parents have promised her a trip to Florida if she achieves this. The trip is an example of ______ forces in Danielle's motivation. a. internal b. external The weight of a small Starbucks coffee is a normally distributed random variable with a mean of 385 grams and a standard deviation of 8 grams find the weight that corresponds to each event(use excel or appendix c to calculate the z value. Round your final answers to 2 decimal places)URGENT 10 ways to communicate in other cultures that are not here in the Philippines