Photorespiration is a process which occurs in plants when there is not enough CO2 available for photosynthesis, resulting in the hydrolysis of ATP.
During photorespiration, oxygen is consumed and carbon dioxide is produced.
The light reactions of photosynthesis produce NADPH and ATP, and when cyclic electron flow is disrupted due to a mutation, the production of NADPH will be reduced.
Without NADPH, the Calvin cycle will not proceed, resulting in the production of glycolic acid, which is further broken down to form glycine, ammonia and carbon dioxide.
This process results in the hydrolysis of ATP and the consumption of oxygen, with the production of carbon dioxide as a by-product.
Photorespiration results in the hydrolysis of ATP, the consumption of oxygen and the production of carbon dioxide.
to know more about photorespiration refer here:
https://brainly.com/question/13433623#
#SPJ11
Match the terms to the appropriate definitions and/or descriptions
HELP!!
Absolute dating:
Using the abnormal isotopes inside specimens and using half-life calculations to learn the absolute dates.Carbon 14 datingRadiometric datingWhat matches other terms?Zircon: A crystal that helps determine the age of an igneous intrusion or layer of a very old specimen.
Meteorites: Help to determine the age of the universe because it is assumed they were around the same time as the Earth was formed
Compression melting: Was likely formed by tectonic and volcanic events
Relative dating: When scientist are simply looking for a logical sequence of events
An igneous intrusion: A crystal that helps determine the age of an igneous intrusion or layer of a very old specimen
Unconformity: When layers are missing from one area to another because of erosion of exposed parts that occurred because of an earthquake or other geological event.
Index fossils: If a fossil is determined to be a certain age, the layer it was found in is likely of the same age.
The Grand Canyon: Was likely entirely formed by a river
Iguazu Falls in Argentina: Was likely formed by glacial forces
Yosemite Valley: The lowest layer of glaciers that lubricate and allows a glacier to move
The statement "An igneous intrusion is always younger than all the layers it cuts through" is true.
The statement "Using radiometric methods to find the approximate age of a layer or fossil" is true.
learn more about Radiometric dating: https://brainly.com/question/8831242
#SPJ1
The text format of the question goes thus:
Absolute dating
Zircon
Meteorites
Compression melting
Relative dating
An igneous intrusion
Unconformity
Index fossils
The Grand Canyon
Iguazu Falls in Argentina
Yosemite Valley
Carbon 14 dating
Radiometric dating
a. was kkely formed by glacial forces
b. is always younger than all the layers it cuts through
Using the abnormal isotopes inside specimens and using half-life calculations to learn the absolute dates.
d. If a fossil is determined to be a certain age, the layer it
was found in is likely of the same age.
e. Using radiometric methods to find the approximate age
of a layer or fossil
was likely entirely formed by a river
When layers are missing from one are to another because of erosion of exposed parts that occurred because of an earthquake or other geological event.
h was likely formed by tectonic and volcanic events
To learn absolute date of a more recent item.
J. the lowest layer of glaciers that lubricate and allows a
glacier to move k. A crystal that helps determine the age of an igneous intrusion or layer of a very old specimen
When scientist are simply looking for a logical sequence
of events
m. Help to determine the age of the universe because it is
assumed they were around the same time as the Earth
was formed
Which of the following complexes will absorb a photon with the lowest energy?
Group of answer choices
A. [Co(OH)6]3-
B. [Co(SCN)6]3-
C. [Co(NO2)6]3-
The complex that will absorb a photon with the lowest energy is [Co(OH)6]3-. The correct answer is option A
Co(OH)6]3- is the complex that absorbs a photon with the lowest energy. It is because of the crystal field effect. The complex [Co(OH)6]3- has the lowest energy for the d-electrons of the cobalt ion. A photon is an elementary particle that forms a light beam. It has a small mass and no charge. A photon has wave-particle duality, which means it exhibits properties of both a wave and a particle. Photons are electromagnetic radiation particles, which means they have both electric and magnetic components.
The lowest energy is defined as the minimum energy that a system can have. It is the energy state that is energetically stable. Photons have energy, and the energy of the photon is directly proportional to its frequency. The energy of a photon can be used to determine the energy of the electron that absorbs it.
A weak field ligand environment means that there is a small energy gap between the t2g and eg orbitals. As a result, it absorbs photons with the lowest energy, according to the spectrochemical series. In comparison to the other complexes, [Co(OH)6]3- has a low-energy gap, which makes it the most stable.
Know more about electromagnetic radiation here:
https://brainly.com/question/10759891
#SPJ11
true/ false: the main form of ketones present in the blood is called acetoacetate (select one word answer only please)
The sentence "The main form of ketones present in the blood is called acetoacetate" is True.
Acetoacetate is one of the three ketone bodies produced in the human liver. The other two ketones are beta-hydroxybutyrate and acetone.
What are ketones? Ketones are substances that are formed when the body breaks down fat for energy when glucose, which is the body's main source of energy, is scarce.
The liver synthesizes ketones from fats as a backup source of fuel when the body runs out of glucose.
A high concentration of ketones in the bloodstream is known as ketosis, and it can occur when a person is fasting, dieting, or has uncontrolled diabetes.
To know more about acetoacetate, refer here:
https://brainly.com/question/8904861#
#SPJ11
what is the correct order of the five para substituents on the carbocation intermediate, if arranged from most stabilizing to least stabilizing?
The correct order of the five para substituents on the carbocation intermediate, if arranged from most stabilizing to least stabilizing is as follows:1) Methoxy group (-OCH3): Methoxy group is an electron-donating group that has a stabilizing effect on carbocation.2) Alkyl groups (-CH3, -C2H5).
These groups also have an electron-donating effect, but their effect is less than that of methoxy.3) Halogens (-F, -Cl, -Br, -I): These are electron-withdrawing groups, but their inductive effect is much weaker than their mesomeric effect. The mesomeric effect of halogens is electron-donating, which compensates for their inductive electron-withdrawing effect.4) Nitro group (-NO2): Nitro is a strongly electron-withdrawing group that destabilizes carbocation.5) Carbonyl group (-COCH3): Carbonyl is also an electron-withdrawing group that destabilizes carbocation.
They are formed by the loss of a leaving group from a substrate, leaving behind a positively charged carbon atom. The stability of the carbocation intermediate is influenced by the nature of the substituents attached to the carbon atom. Substituents can be electron-donating or electron-withdrawing, depending on their effect on the carbocation.The most stabilizing substituents are electron-donating groups, such as methoxy (-OCH3) and alkyl groups (-CH3, -C2H5). These groups donate electrons to the carbocation, which increases its stability. Halogens (-F, -Cl, -Br, -I) are also electron-donating, but their mesomeric effect is stronger than their inductive effect. This means that their overall effect is electron-donating, but weaker than that of methoxy and alkyl groups.
Read more about the carbocation :
https://brainly.com/question/13998560
#SPJ11
."Scientists believe the amygdala is responsible for emotion."
What is the best definition for responsible as it is used in the previous
quote?
A Liable to be called on to answer
B. Having the job or duty
C. Politically answerable
D. Able to answer for one's conduct and obligations
D. Able to answer for one's conduct and obligations
What is the amygdala?The amygdala is a pair of almond-shaped structures located in the brain's temporal lobes. It is part of the limbic system, which is involved in the processing of emotions and memory. The amygdala is involved in the formation of memories associated with emotional events, as well as the reaction to those memories.
The amygdala also plays a role in the regulation of the body's fight-or-flight response, which is the autonomic nervous system's response to danger or perceived danger. It is thought to be involved in the formation of fears and phobias, as well as the development of aggressive behaviors. In addition, the amygdala is believed to be involved in the processing of social cues, such as facial expressions and body language.
Learn more about the amygdala here:
https://brainly.com/question/24171355
#SPJ1
an unknown gas effuses at a rate 0.667 times the rate of co₂. what is the molar mass of the unknown gas?
An unknown gas effuses at a rate 0.667 times the rate of co₂. The molar mass of the unknown gas is 120 g/mol.
The rate of effusion for an ideal gas is proportional to the inverse square root of the gas' molar mass. It's known as Graham's law. Graham's Law explains the rate of effusion of a gas through a small hole into a vacuum. The rate of effusion for an ideal gas is proportional to the inverse square root of the gas' molar mass (relative molecular mass). According to the question, the effusion rate of the unknown gas is 0.667 times that of CO₂.
Let the molar mass of the unknown gas be "x".
Therefore, the effusion rate for the unknown gas is proportional to
.[tex]\[\frac{1}{\sqrt{x}}\].[/tex]
The effusion rate of CO₂ is proportional to \[\frac{1}{\sqrt{44}}\].
Now,
[tex]\[\frac{\text{Effusion rate of the unknown gas}}{\text{Effusion rate of CO}_2}=\frac{0.667}{1}\][/tex]
or,
\[tex]\[\frac{1}{\sqrt{x}}=\frac{0.667}{\sqrt{44}}\][/tex]]
or,
[tex]\[\sqrt{x}=\frac{\sqrt{44}}{0.667}\][/tex]
or,
[tex]\[x=\left ( \frac{\sqrt{44}}{0.667} \right )^{2}\][/tex]
Therefore, the molar mass of the unknown gas is 120 g/mol.
For more such questions on molar mass , Visit:
https://brainly.com/question/21334167
#SPJ11
Only the first and second choices are correct.
Polysaccharides always:
Please choose the correct answer from the following choices, and then select the submit answer button.
are a string of three or more sugar molecules.
are polymers.
contain lipids.
All of the above are correct.
Only the first and second choices are correct.
The correct option will be only the first and second choices are correct.
What are Polysaccharides?Polysaccharides, in general, are carbohydrates that contain a large number of monosaccharide units bonded by glycosidic bonds. Polysaccharides are the polymers in which the monomer is a sugar molecule. Polymers are large molecules made up of many smaller molecules connected together.
In this case, the smaller molecules are monosaccharides, which are combined to form polysaccharides. Polysaccharides are formed when three or more monosaccharides join together to form a chain.
The correct option is that only the first and second choices are correct.
Learn more about Polysaccharides here:
https://brainly.com/question/780562
#SPJ11
A chemist heats the block of gold as shown in the interactive, then places the metal sample in a cup of oil at 25.00 °C instead of
a cup of water. The temperature of the oil increases to 26.52 °C. Calculate the mass of oil in the cup. The specific heat of gold is
0.129 J/g °C and the specific heat of oil is 1.74 J/g °C.
moil =
$
4
d
%
5
<
6
MacBook Air
FG
&
7
3
F7
00 *
8
DII
FB
9
DD
F9
O
4
F10
4
F11
+ 11
Do
8
√3)
F12
Draw the hydrogen bonding of G-C and A-T pairs by hand. For each hydrogen bond, please point out which are hydrogen bond donors, and which are hydrogen bond acceptors.
Everyone agrees that guanine-cytosine (GC) base pairs have three hydrogen bonds, but adenine-thymine (AT) base pairs only have two.
What do adenine's hydrogen bond acceptors and donors look like?Testing the significance of the these two polar organisations together necessitates an analogue whereby both are replaced to nonpolar functionality, preferably maintaining steric dimensions and forms as closely as possible. Adenine carries a hydrogen - bonding acceptor (N1) as well as a donor (NH2) along its Watson-Crick base pairing edge.
What do donors and acceptors of cytosine hydrogen bonds do?Three hydrogen bonds hold guanine-cytosine base pairs, often known as GC base pairs, together. The bases are marked with the names of the hydrogen - bonding donors and recipients. The hydrogen - bonding donors all are NH groups. Nitrogen and oxygen atoms with a single pair of electrons can act as hydrogen bond acceptors.
To know more about adenine-thymine visit:
https://brainly.com/question/15305540
#SPJ1
An amine that is insoluble in water can be made to dissolve by adding it to an aqueous solution of Select one: O a. HCI O b. NaOH O c. an amide O d. none of the above; it can't be made water soluble
An amine that is insoluble in water can be made to dissolve by adding it to an aqueous solution of NaOH.
Therefore, option b. NaOH is correct option.
An amine is an organic compound with the formula RNH2 or R2NH or R3N, where R is an alkyl or aryl group. Amines are a type of derivative of ammonia, with one or more hydrogen atoms replaced by organic substituents.
Amines are classified as primary, secondary, or tertiary depending on the number of substituents attached to the nitrogen atom. Furthermore, they are weak bases, with aqueous solutions having pH values greater than 7 because of the presence of the amino group. When amines dissolve in water, they can act as either Bronsted-Lowry bases or Lewis bases. However, most amines are insoluble in water.Water-soluble amines Amines, despite being basic compounds, are often insoluble in water, which is a polar solvent.
As a result, they may be made water-soluble by reacting with acids. For instance, when an amine is added to an aqueous solution of hydrochloric acid, the amine ionizes and dissolves in the acidic solution. Water-soluble salts, such as ammonium chloride, are formed. Other acid-based techniques for making amines water-soluble include reacting them with sulfonic acids and oxoacids. Amines with low molecular weight are also soluble in water because they can form hydrogen bonds with water molecules.Solubility in water may be achieved by adding an amine to an aqueous solution of NaOH, which serves as a base, neutralizing the amine and making it soluble. Water-insoluble amines are converted to water-soluble compounds when they react with NaOH.
for such more question on amine
https://brainly.com/question/9631835
#SPJ11
mpirical formula for a compound which contains 0.0134 g of iron, 0.00769 g of sulfur and 0.0115 g of oxygen
The empirical formula for a compound which contains 0.0134 g of iron, 0.00769 g of sulfur and 0.0115 g of oxygen is FeS2O3.
First determine the ratio of each element. Divide the mass of each element by its atomic weight and then divide the results by the smallest value obtained.
The atomic weights are: Fe=55.845, S=32.065 and O=16.00. Dividing the mass of each element by its atomic weight gives the following ratios: Fe=0.0240, S=0.0024 and O=0.0072.
Dividing the ratios by the smallest value (0.0024) gives us 10, 1 and 3 respectively. This means that the empirical formula is Fe10S1O3.
We must divide all values by the highest common factor, which in this case is 2. This gives us Fe5S1/2O3/2 or FeS2O3.
Therefore, the empirical formula for a compound which contains 0.0134 g of iron, 0.00769 g of sulfur and 0.0115 g of oxygen is FeS2O3.
to know more about empirical formula refer here:
https://brainly.com/question/14044066#
#SPJ11
which property is a main difference between a nucleic acid and a carbohydrate?
The main difference between nucleic acids and carbohydrates is that nucleic acids are made up of nucleotides, while carbohydrates are made up of monosaccharides.
Therefore, the property that distinguishes nucleic acids from carbohydrates is their composition of nucleotides, which are the basic structural units of nucleic acids.
What are nucleic acids?
Nucleic acids are the biomolecules that encode and transmit genetic information in cells.
They are primarily composed of carbon, nitrogen, oxygen, and phosphorus, and are formed by polymerization reactions in which nucleotides are joined by phosphodiester bonds to form polynucleotide chains.
What are carbohydrates?
Carbohydrates are organic compounds composed of carbon, hydrogen, and oxygen, with the general formula CnH2nOn.
They are classified based on the number of monosaccharide units they contain, with monosaccharides being the simplest and most basic carbohydrate units.
Carbohydrates serve as a source of energy and a structural component in living organisms.
For similar question on nucleic acids.
https://brainly.com/question/12206202
#SPJ11
Find an expression for the oscillation frequency of an electric dipole of dipole moment P and rotational inertia I for small amplitudes of oscillation about its equilibrium position in a uniform electric field of magnitude E.
The oscillation frequency of an electric dipole in a uniform electric field can be expressed as:
f = (1/2π) x (1/√(I/2P x E))
What is oscillation?Oscillation can be defined simply as a variation that is repetitive (in time) of measures about a value which is central, or a value between two or more accounts of different states. The oscillation occurs not only in the mechanical system but it also occurs in dynamic systems areas of every scientific founding.
The oscillation frequency is given by
f = (1/2π) x (1/√(I/2P x E))
where:
f is the oscillation frequency in Hertz (Hz) I is the rotational inertia of the dipole in kg*m² P is the dipole moment in Coulomb-meter (C*m) E is the magnitude of the uniform electric field in Volts/meter (V/m)This expression assumes small amplitude oscillations and is derived from the equation of motion of a simple harmonic oscillator. In this case, the torque on the dipole due to the electric field is proportional to the displacement of the dipole from its equilibrium position, and the restoring torque due to the rotational inertia of the dipole is proportional to the angular displacement. By equating these torques, we get the equation of motion of the dipole in terms of the oscillation frequency, rotational inertia, dipole moment, and electric field.
Learn more about oscillation on:
https://brainly.com/question/12622728
#SPJ11
Select all of the following molecules that contain stereocenters.-alkene with H wedges and CH3 dash-both 1,2-dimethylcyclohexane-cyclohexane with wedge-dash methyl
The stereocenter-containing molecule is:
1,2-dimethylcyclohexane (both carbons at position 1 and 2 are stereocenters as they have four distinct substituents connected to them)
(both carbons at position 1 and 2 are stereocenters as they have four different substituents attached to them)
Stereocenters are absent from the other compounds that were listed. Because the double bond does not include any substituents that are distinct from one another, the alkene with H wedges and the CH3 dash does not have stereocenters. As all of the carbons in cyclohexane are symmetric and do not have four separate substituents connected to them, the cyclohexane with wedge-dash methyl likewise lacks stereocenters., the only molecule in the list that contains stereocenters is 1,2-dimethylcyclohexane.
learn more about stereocenter-containing here:
https://brainly.com/question/23096013
#SPJ4
Which layers of the stem are made of parenchyma cells? cortex and pith epidermis sclerenchyma epidermis and cortex.
The cortex and pith layers of the stem are made up of parenchyma cells. These cells are responsible for storing and transporting nutrients and water throughout the plant.
Two significant plant stem layers are the cortex and pith. The pith is found at the stem's centre, while the cortex is situated in between the epidermis and the vascular tissue. Parenchyma cells, which are the most prevalent and adaptable form of plant cell, make up both of these layers. Large vacuoles and thin cell walls are characteristics of parenchyma cells, which may perform a variety of tasks include photosynthesis, water and nutrient transport, and storage. The flow of water and nutrients between the roots and leaves in stems is especially dependent on the parenchyma cells in the cortex and pith.
learn more about cortex here:
https://brainly.com/question/29342434
#SPJ4
Chlorate is an oxyanion. It contains a single covalent bond between oxygen and chlorine atoms. The ion also have an ovaral negative charge. Show by calculation that the percentage by mass of chlorate 1 in calcium chlorate 1 is greater than the percentage by mass of chlorate 1 ions in Sodium chlorate
Percentage by mass of chlorate 1 in calcium chlorate 1 is greater than the percentage by mass of chlorate 1 ions in Sodium chlorate.
What is an oxyanion? Give an example of an oxyanion.An oxyanion is a polyatomic ion that contains at least one oxygen atom and one or more other elements, typically nonmetals. Examples of oxyanions include nitrate (NO3-), sulfate (SO42-), and phosphate (PO43-).
The molecular formula for calcium chlorate is Ca(ClO3)2, and the molecular formula for sodium chlorate is NaClO3.
To calculate the percentage by mass of chlorate 1 in calcium chlorate 1, we need to calculate the molar mass of Ca(ClO3)2 and the molar mass of chlorate 1.
Molar mass of Ca(ClO3)2 = 1 mol Ca + 2 mol ClO3
= 40.08 g/mol Ca + 2(35.45 g/mol Cl + 3(16.00 g/mol O))
= 238.06 g/mol
Molar mass of chlorate 1 = 35.45 g/mol Cl + 3(16.00 g/mol O)
= 99.45 g/mol
Now, we can calculate the percentage by mass of chlorate 1 in calcium chlorate 1:
% by mass of chlorate 1 in calcium chlorate 1 = (2 mol ClO3 x 99.45 g/mol) / (1 mol Ca(ClO3)2 x 238.06 g/mol) x 100%
= 83.3%
To calculate the percentage by mass of chlorate 1 in sodium chlorate, we only need to calculate the molar mass of NaClO3 and the molar mass of chlorate 1.
Molar mass of NaClO3 = 22.99 g/mol Na + 35.45 g/mol Cl + 3(16.00 g/mol O)
= 106.99 g/mol
Molar mass of chlorate 1 = 35.45 g/mol Cl + 3(16.00 g/mol O)
= 99.45 g/mol
Now, we can calculate the percentage by mass of chlorate 1 in sodium chlorate:
% by mass of chlorate 1 in sodium chlorate = (1 mol ClO3 x 99.45 g/mol) / (1 mol NaClO3 x 106.99 g/mol) x 100%
= 92.9%
Learn more about calcium chlorate here:
https://brainly.com/question/5923839
#SPJ1
how is the atomic number of an atom determined? view available hint(s)for part a how is the atomic number of an atom determined? counting the number of atoms of an element in a mineral counting the number of protons circling the nucleus counting the number of protons in the nucleus counting the number of neutrons in the nucleus counting the number of protons and neutrons in the nucleus
The atomic number of an atom is determined by counting the number of protons in the nucleus. This is because the atomic number is defined as the number of protons in an atom's nucleus.
What is atomic number?
The atomic number is the number of protons in an atom. The periodic table is arranged according to atomic number, which determines the chemical properties of an element. All neutral atoms of a given element have the same number of protons and electrons.
A neutral atom has an equal number of positively charged protons and negatively charged electrons, which results in no overall charge.The electron arrangement in an atom determines how it will interact with other atoms. The element's chemical properties are determined by the electron configuration of its atoms.
The number of protons in the nucleus determines the element's atomic number, which is a fundamental property of the element. The atomic number identifies the element and its position on the periodic table.
To know more about atomic number refer here: https://brainly.com/question/8834373#
#SPJ11
Write a chemical equation for HNO3(aq) showing how it is an acid or a base according to the Arrhenius definition.Express your answer as a chemical equation. Identify all of the phases in your answer.Part CWrite a chemical equation for HF(aq) showing how it is an acid or a base according to the Arrhenius definition.Express your answer as a chemical equation. Identify all of the phases in your answe
Part A The chemical equation for HNO3 showing it is acid is:-
HNO3 (aq) → H+ (aq) + NO3- (aq)
The phases are HNO3 (aq) = aqueous solution, H+ (aq) = aqueous solution and NO3- (aq) = aqueous solution.
Part B The chemical equation for HF showing it is acid is:-
HF (aq) → H+ (aq) + F- (aq)
The phases are HF (aq) = aqueous solution, H+ (aq) = aqueous solution, and F- (aq) = aqueous solution.
HNO3 (aq) is an acid according to the Arrhenius definition because the chemical substance HNO3 (nitric acid) dissociates in an aqueous solution to release hydrogen ions (H+).
HF (aq) is an acid according to the Arrhenius definition because the chemical substance HF (hydrofluoric acid) dissociates in an aqueous solution to release hydrogen ions (H+).
Learn more about Arrhenius:
https://brainly.com/question/14739712
#SPJ11
what the deffinition of structural formula?
Structural formula: Definition: A structural formula is a molecular representation that depicts the relationship between atoms or functional groups in a chemical compound. It's also known as a chemical formula or molecular formula.
Structural formulas provide a more detailed view of the molecular structure than empirical formulas, which only show the simplest ratio of atoms in a compound.
The structural formula also shows the spatial arrangement of atoms and groups in a compound.
There are two types of structural formulas: condensed structural formulas and Lewis structures.
Condensed structural formulas provide a concise representation of the molecular structure by eliminating most of the bonds and functional groups present in a compound.
The Lewis structure, on the other hand, shows the bonding pairs and lone pairs of electrons present in a molecule.
Structural formulas are critical in chemical analysis, particularly in organic chemistry, where they aid in the identification and characterization of chemical compounds.
These formulas help to explain the chemical properties and behavior of compounds, making them useful in drug development, food production, and other industries.
For similar question on structural formula.
https://brainly.com/question/26388921
#SPJ11
what needs to increase in order to make a substance more soluble?
By supplying more energy to counteract intermolecular interactions and increasing contact between solvent and solute, raising temperature, agitation, surface area, or lowering particle size can enhance solubility.
A substance's solubility refers to its capacity to dissolve in a solvent. Intermolecular forces between the solute particles are broken during the dissolving process, and new connections with the solvent molecules are created. Solubility can be raised by adding extra energy to break through these intermolecular connections. Although agitation and expanding surface area improve the contact between the solvent and solute, rising temperature releases more thermal energy to break the intermolecular interactions. By increasing surface area per unit volume, particle size reduction increases interaction with the solvent. Moreover, by giving the solute additional solvation sites, more solvents or surfactants can be added to increase solubility.
learn more about solubility here:
https://brainly.com/question/29857840
#SPJ4
19. which sample, when dissolved in 1.0 liter of water, produces a solution with the lowest boiling point?
The sample with the lowest boiling point when dissolved in 1.0 liter of water is sodium chloride (NaCl). Sodium chloride is a common salt compound which, when dissolved in water, lowers the boiling point of the solution.
To calculate the boiling point, use the following equation: Boiling Point = K b x m, where Kb is the ebullioscopic constant and m is the molality of the solution.
The ebullioscopic constant for sodium chloride is 0.51 K kg mol-1 and the molality is equal to the number of moles of solute divided by the volume of the solution. Therefore, for a 1.0 liter solution, the boiling point of the solution would be 0.51 K kg mol-1 x 0.78 moles/1.0 liter = 0.398 K kg mol-1.
Learn more about boiling point: https://brainly.com/question/40140
#SPJ11
When preparing to light a gas burner, which of the following do you do first?
Answer: clear the area of anything flammable such as hair, chemicals, Ect.
The model for the atom that was understood when Bohr made his contributions was called the:
Select the correct answer below:
planetary model
plum pudding model
solid sphere model
quantum model
The model for the atom that was understood when Bohr made his contributions were called the option (A) Planetary Model.
What is the Bohr's Model?Bohr's model, also known as the Planetary model, is a basic model of the atom that explains the atomic structure. The atomic nucleus is in the center of the atom, with electrons moving in circular orbits about it at different energy levels.
The model is called the planetary model because it resembles the planets in the solar system revolving around the sun. The electrons are arranged in concentric circles around the nucleus, with each circle corresponding to a specific energy level.
In summary, when Bohr made his contributions, the model for the atom that was understood was called the Planetary Model.
To know more about the planetary model:
https://brainly.com/question/30790603
#SPJ11
In an open manometer with an atmospheric pressure of 104 kPa, the mercury level in the arm connected to the gas is 150 mm Hg lower than in the arm connected to the atmosphere. What is the pressure of the gas sample?
which of the compounds of h2c2o4 , ca(oh)2 , koh , and hi , behave as acids when they are dissolved in water?
The compounds of H2C2O4 (oxalic acid), Ca(OH)2 (calcium hydroxide), and KOH (potassium hydroxide) all behave as acids when they are dissolved in water. HI (hydrogen iodide) is an inorganic compound and will not behave as an acid when dissolved in water.
Out of the compounds of H2C2O4, Ca(OH)2, KOH, and HI, the only acid is HI (Hydroiodic acid).Explanation:The strength of an acid is determined by its ability to donate a proton (H+). When an acid is dissolved in water, it dissociates and releases hydrogen ions (H+), which contribute to the acidic nature of the solution. HI (Hydroiodic acid) is the only acid among H2C2O4, Ca(OH)2, KOH, and HI.Calcium hydroxide (Ca(OH)2) and potassium hydroxide (KOH) are strong bases that are completely ionized in water. As a result, they dissociate and release hydroxide ions (OH-) into the solution, making it alkaline. Oxalic acid, which is H2C2O4, is a dicarboxylic acid with a chemical structure of HOOC-COOH. It is a weak organic acid that is used to clean equipment in laboratories.HI (Hydroiodic acid) is a hydrogen halide compound that is soluble in water. It is a strong acid that dissociates completely in water, releasing hydrogen ions (H+). When HI is dissolved in water, it acts as an acid and increases the acidity of the solution. Therefore, the correct answer is that HI (Hydroiodic acid) behaves as an acid when dissolved in water.
For more such questions on Oxalic acid
https://brainly.com/question/18648804
#SPJ11
H2C2O4, also known as oxalic acid, is a weak organic acid that behaves as an acid when dissolved in water. In aqueous solution, it donates H+ ions to the water, resulting in an acidic solution.
Ca(OH)2 and KOH are both strong bases and do not behave as acids when dissolved in water. They accept H+ ions from water to form OH- ions, resulting in a basic solution.HI, also known as hydroiodic acid, is a strong acid that behaves as an acid when dissolved in water. It dissociates completely in water, producing H+ ions and I- ions.In summary, H2C2O4 and HI behave as acids when dissolved in water, while Ca(OH)2 and KOH behave as bases. The behavior of a compound in water is determined by its chemical properties, such as the strength of its acid or base character, and its ability to donate or accept H+ ions.For such more question on oxalic acid
https://brainly.com/question/15464187
#SPJ11
Did the control experiment verify or refute the results from exercise 1? use your results from exercises 1 and 2 to validate your answer.
Experiment 1 E Data Table 1 B Data Table 2 Data Table 1: Antacid Neutralization Data Mass of 0. 59 Crushed Antacid (9) Concentration 1. 0 of HCI (M) Volume HCI 5. 0 (mL) Concentration 1. 0 of NaOH (M) Initial NaOH 9. 4 mL Volume (mL) Final NaOH 8. 2 mL Volume (mL) Total Volume 1. 2 mL of NaOH Used (mL) Experiment 1 Data Table 1 Data Table 2 Data Table 2: Experimental Results I 0. 1825 g 0. 0012 HCl available for neutralization (g): Moles of NaOH required to reach stoichiometric point (mol): HCI neutralized by antacid (g): НСІ neutralized per gram of antacid (9) 0. 1387 0. 2774 Experiment 2 El Data Table 3 B Data Table 4 Data Table 3: Control Experiment Data Concentration 1. 0 of HCI (M) Volume HCI 5. 0 (mL) Concentration 1. 0 of NaOH (M) Initial NaOH 9. 2 mL Volume (mL) Final NaOH 3. 6 mL Volume (mL) Total Volume 5. 6 mL of NaOH Used (mL) Data Table 4: Control Experiment Results 0. 2049 Moles of 0. 0056mol NaOH needed to neutralize 5. 0 mL of 1. OM HCI (mol): Grams of HCI neutralized (g): NaOH 4. 4mL volume difference between back titration and control (ml): Grams of 0. 160g HCI neutralized by NaOH volume difference (9)
Volume difference between back titration and controlHCI neutralized by NaOH volume difference is 0.0056 moles.
Given,
* Mass of Antacid = 0.5g
* [HCl] = 1M
* [tex]V_{HCl}[/tex] = 5 ml (pipetted out)
* [NaOH] = 1M
* [tex]V_{NaOH}[/tex] - 1.2 ml (consumed)
* Amt. of HCl avaliable for neutralisation = 0.1825 g
* No. of moles of NaOH req. to reach eq. point = 0.0012
* Amt. of HCl neutralised by antalid = 0.1387 g
* Amt. of HCl neutralised by antalid = 0.1387 g
* Amt. of HCl neutralised per gram of antalid = 0.1387 g
Solution: [tex]([/tex][tex]N[/tex] × [tex]V[/tex][tex])_{HCl}[/tex] = [tex]([/tex][tex]N[/tex] × [tex]V[/tex][tex])_{NaOH}[/tex]
(1 x 5 ) = [tex]([/tex][tex]1[/tex] × [tex]V[/tex][tex])_{NaOH}[/tex]
= [tex]V(NaOH)[/tex] = ( 1 x 5) / 1 = 5ml
In control expt. data [tex]V(NaOH)[/tex] = 5.6ml
But in given data, [tex]V(NaOH)[/tex] = 1.2ml
So, Volume diff. of NaOH between back titration and control = 5.6 - 1.2 = 4.4ml
So, given follows
So, 4.4 ml of HCl means,
its Conc. will be equal to, 4.4 x 36.5 / 1000 = 0.1606 g
This is correct in control expt. results
In control expt. data, [tex]V(NaOH)[/tex] = 5.6ml
This corresponds to 5.6 x 40 / 1000 = 0.224g
This correspond to 0.224 / 40 = 0.0056 moles
This is correct in control expt. results.
Titration is a laboratory technique used to determine the concentration of an unknown solution by reacting it with a known solution. It is a quantitative method used to determine the amount of a substance in a sample. Titration is often used in chemistry to determine the concentration of acids, bases, and salts.
In a titration, a measured amount of the unknown solution is slowly added to a known solution of a substance with a known concentration called the titrant. The titrant is added until the reaction is complete, and a color change or other observable change occurs. The point at which the reaction is complete is known as the endpoint, and it is usually determined using an indicator, which changes color when the reaction is complete.
To learn more about Titration visit here:
brainly.com/question/2728613
#SPJ4
silver nitrate can inhibit the amylase reaction by?
By severing disfluid connections, silver nitrate can prevent the amylase reaction from happening. Wheat flour's -amylase can be prevented from working by adding silver nitrate (AgNO₃).
As silver nitrate is a non-competitive inhibitor that disrupts the folding of the enzyme, it should be the most efficient in inhibiting amylase at 37°C if different inhibitors are tried with amylase to quantify the quantities of free-reducing sugars.
Accurate evaluation of the pasting qualities of wheat flour is hampered by endogenous -amylase. When rice flour with a medium to high amylose content is gelatinized, the capacity of silver nitrate (AgNO₃) solutions at seven various concentrations (0.001-0.1 m) to inhibit -amylase activity is compared with a deionized water (dH₂O) control (AC). Using a Quick Visco Analyzer, pasting characteristics are evaluated (RVA).
Learn more about Amylase here:
https://brainly.com/question/1705856
#SPJ4
Suppose the molar solubility of Ag2CrO4 in water is x M, while its molar solubility in a 0.005 M solution of Na2CrO4 is y M. Which of the following is correct?A) It can't be determined.B) x < yC) x > yD) x = y
When Ag2CrO4 is dissolved in a Na2CrO4 solution, its molar solubility decreases. In other words, x > y.The correct answer is c.
The molar solubility is the quantity of a solute (in moles) that can be dissolved per liter of solution (in liters) at equilibrium. It is a measure of the solubility of the solute in the solvent.
Solubility is a measure of a compound's ability to dissolve in a particular solvent at a particular temperature and pressure.According to the common ion effect, the presence of a common ion decreases the solubility of a substance in solution.
Because Na2CrO4 and Ag2CrO4 are both soluble in water, they will dissociate into their constituent ions when dissolved in water according to the following reactions:Na2CrO4 → 2Na+ + CrO42-Ag2CrO4 → 2Ag+ + CrO42-When Ag2CrO4 dissolves in a Na2CrO4 solution, however, the addition of the common chromate ion, CrO42-, will push the above equilibrium to the left, resulting in a decrease in the amount of Ag2CrO4 that dissolves.
As a result, when Ag2CrO4 is dissolved in a Na2CrO4 solution, its molar solubility decreases. In other words, x > y.
Learn more about molar solubility here:
brainly.com/question/28170449
#SPJ11
How does the number of dissolved ions in solution affect the boiling point of that solution?
A solution's boiling point rises as the amount of dissolved ions increases because more energy is needed to overcome greater intermolecular interactions that occur between the ions and solvent molecules.
The intermolecular interactions between the molecules of the solute and solvent are impacted when a solute is dissolved in a solvent. When it comes to ionic solutes, the ions separate and create ion-dipole interactions with the solvent molecules. In non-ionic solutions, these interactions are more potent than the dipole-dipole and London dispersion forces. Because the intermolecular interactions in a solution with more dissolved ions are stronger, more energy is needed to overcome them and reach the boiling point. The van 't Hoff factor, which measures the amount of ions created by each solute molecule, and the molality of the solution are used to quantify the boiling point elevation impact.
learn more about boiling point here:
https://brainly.com/question/25777663
#SPJ4
Read through each scenario. Under the scenario, write which lab safety rule is being broken.
Explanation:
1. Carlos is using unknown chemicals, which is breaking the rules that state: "Treat every chemical hazardous" and "No chemical should be taken without proper authorisation".
2. Jane doesn't know where the eye-wash station is, so she is breaking Rule #1: "Know locations of laboratory safety showers, eyewash stations, and fire extinguishers. The safety equipment may be located in the hallway near the laboratory entrance."
3. Harry has broken the rule that says that "No horseplay will be tolerated." He has turned on the hot plate without instruction.
4. Brent is eating in class. Eating in laboratories where hazardous materials are present is prohibited, yet he still eats a bagel. He is at risk of food poisoning.
5. Sniffing or tasting chemicals can be dangerous or even deadly as the vapours or fumes can contain traces of unknown toxins.
6. She should be more careful, and according to lab safety rules, she should put her bag in the designated areas and work independently unless she is told by her instructor to do otherwise.
7. Rachel should dress for the lab. If she doesn't and her clothes react badly to the chemicals, it would pose serious health problems.
8. I don't know about this question.
9. Water can act as a reactant, so the chemical in the sink may damage the lab or outside pipes if corrosive. Experiments should be left in the lab unless told to do otherwise by the instructor.
10. Clean up at the end of lab. In this situation, Diana and Mike didn't clean up thoroughly, which can damage their bench top.
11. Jake is performing experiments without permission. He may become a threat to himself if his body gets contaminated.
12. The experiments wouldn't be conducted correctly, which may contaminate the students around them or damage the lab. Heather and Jennifer might pose a threat to the lab.
13. Again, tasting or smelling lab materials are strictly prohibited. Rebecca may harm her digestive system if she tries an unknown salt.
14. Unwanted reactions may occur, and the result might be acidic, corrosive, contaminate the surrounding area or discolour some places.
15. Because if we do not follow procedures and rule, we may damage some tools or fellow students.
