the rules for communication between network devices are called ________.

The appropriate spreadsheet function that calculates the present value of an ordinary annuity of $100 per year for 10 years at 10% per year is PV(0.10,10,-100,0,0). The correct answer is a.

where: rate = the interest rate per period

nper = the total number of payment periods in an annuity

pmt = the payment made in each period (in this case, $100 per year)

fv = the future value of the annuity (in this case, $0 since it is an ordinary annuity)

type = the type of annuity (in this case, $0 since it is an ordinary annuity)

Learn more about  spreadsheet  here: https://brainly.com/question/26919847

#SPJ11

The wiring connectors that a technician should use when terminating the cable are RJ-45.

The RJ-45 is a type of connector commonly used in Ethernet networking applications. The connectors are also used for other purposes such as telecommunications, video, and audio transmissions. The RJ-45 connector is an eight-pin connector that is used for connecting twisted-pair cable.A connector is a device that is used to connect cables to other cables or devices. There are many different types of connectors that are used in the industry, each with its own specific function. Some connectors are used for power, some for data, and others for audio and video.

An RJ-45 connector is a type of connector that is used for Ethernet networking applications. It is an eight-pin connector that is used for connecting twisted-pair cable. The connector has a locking tab that prevents the cable from being pulled out accidentally. RJ-45 connectors are used for a variety of applications such as telecommunications, video, and audio transmissions.

Learn more about RJ-45: https://brainly.com/question/30457663

#SPJ11

A linked List is more efficient in terms of memory usage if a list has 180 integers. an array is more efficient than a linked list for a list that has 20 integers. An array and a linked list will require the same amount of memory if the list has 1 element.

(a) Linked List is more efficient in terms of memory usage if a list has 180 integers in it since an array of type int is defined to hold up to 200 ints. An array of size 200 x 4 bytes will consume 800 bytes of memory, whether we use all of the memory or not. While the linked list, which can use memory on a per-node basis, will consume just the right amount of memory that is required for the given number of nodes. Therefore, it will be more effective.

(b) In terms of memory use, an array is more efficient than a linked list for a list that has 20 integers. 20 x 4 bytes = 80 bytes are required for storing an array of 20 integers, whereas an array of 20 integers in the linked list will require 20 nodes x 8 bytes per node = 160 bytes, which is double the amount of memory required for an array.

(c) An array and a linked list will require the same amount of memory if the list has 1 element. A linked list with only one node will require 8 bytes of memory (4 bytes for data, 4 bytes for next reference), while an array with 1 integer element will require 4 bytes of memory.

To know more about the linked list: https://brainly.com/question/20058133

#SPJ11

The option that is not an example of identifying protocols that are needed to support hardware and software requirements of applications that will use the network is e) an application will have drop-down menu choices.

Protocols are the set of rules, procedures, and data formats that two or more entities (devices) use to communicate over a network. The protocol used on a network should match the requirements of the application that is using the network. Identifying protocols that support the hardware and software requirements of the application is a crucial step to ensure network connectivity.

Therefore, among the given options, e) an application will have drop-down menu choices is not an example of identifying protocols that are needed to support hardware and software requirements of applications that will use the network. It is a feature that is used for user interface design.

Learn more about computer networking and network protocols:https://brainly.com/question/14672166

#SPJ11

Your question is incomplete but probably the complete question is :

Which of the following is not an example of identifying protocols that are needed to support hardware and software requirements of applications that will use the network?

a. an application will use HTTP over TCP/IP

b. an application will run on an IBM mainframe and so the network will require SNA traffic

c. an application will need a gateway to translate SNA traffic into TCP/IP protocols

d. an application will use SPX/IPX with a Novell file server

e. an application will have drop down menu choices

The recursive version of the function decimal which takes in an integer n and returns a list of its digits, the decimal representation of n can be written as follows:
def decimal(n):
 if n == 0:
   return [0]
 elif n < 0:
   return ['-'] + decimal(-n)
 else:
   return decimal(n // 10) + [n % 10]

-This recursive function takes an integer n as an input and returns a list of its digits, the decimal representation of n.

-If n is equal to 0, the function returns a list containing 0 as the element.

-If n is less than 0, the function returns a list containing a negative sign followed by the result of a recursive call to the function for -n.

-Otherwise, the function returns a list that is a result of a recursive call to the function for n // 10 followed by the remainder of n % 10.

Learn more about recursive function here: https://brainly.com/question/489759

#SPJ11

The bus transmits a memory address when primary storage is the sending or receiving device.

Bus in Computer Science- A bus is a collection of wires used to transmit data from one component to another on a motherboard or other electronic circuit board. In modern computer systems, buses have become a significant component.

The primary purpose of a bus is to enable the computer's different components to communicate with one another. Each bus in a computer has a fixed number of wires dedicated to transmitting data to specific parts of the computer. These buses' capacity and design are determined by the type of computer being built and the components being used. A computer may have a number of buses, each performing a specific function.

The transmission of memory addresses when primary storage is the sending or receiving device is made possible by a bus. To put it another way, the bus makes it possible for the computer's central processing unit (CPU) and random access memory (RAM) to communicate efficiently. When the CPU is looking for information, it sends a request to RAM, and the address of the data is transmitted over the bus. Then, once the requested data is found, it is sent back over the bus to the CPU, which can now use it to execute the instructions required for the computer to complete a given task.

To learn more about "primary storage", visit: https://brainly.com/question/31140161

#SPJ11

Your passwords should be created using an algorithm that produces ones that combine letters, numbers, and symbols.

Experts advise using salt and a powerful, slow hashing algorithm like Argon2 or Bcrypt to secure passwords (or even better, with salt and pepper). (In essence, for this usage, avoid quicker algorithms.) to validate certificate and file signatures.

All passwords should contain a mix of capital and lowercase letters, digits, and special characters . Avoid using names of individuals, pets, or words from the dictionary. It's also recommended to stay away from utilising important dates (birthdays, anniversaries, etc.).

To know more about algorithm visit:-

https://brainly.com/question/24452703

#SPJ1

Textlinks are the name given to the specifically coded components in a website that allow you to navigate from one web page to another within the same website or to another. The idea that hashtag activism promotes a fictitious sense of involvement is criticized. An alternative to searching specific web pages is a metasearch engine.

To learn more about web page, refer to:

https://brainly.com/question/28431103

During the EVALUATE ADDRESS step of an LC-3 LDR instruction, the MAR register is changed. Therefore, the correct option is E. MAR.

The rest of the options are discussed below:

a. PC: The Program Counter (PC) register, which keeps track of the address of the current instruction, is not changed in the EVALUATE ADDRESS step of an LC-3 LDR instruction. Therefore, the answer is incorrect.

b. NONE: Since MAR is changed during the EVALUATE ADDRESS step of an LC-3 LDR instruction, this answer is incorrect.

c. MDR: Memory Data Register (MDR) is not modified during the EVALUATE ADDRESS step of an LC-3 LDR instruction. Therefore, the answer is incorrect.

d. DST register: The DST register is not modified during the EVALUATE ADDRESS step of an LC-3 LDR instruction. Therefore, the answer is incorrect.

e. MAR: The Memory Address Register (MAR) is changed during the EVALUATE ADDRESS step of an LC-3 LDR instruction. Therefore, the answer is correct.

f. IR: Instruction Register (IR) is not changed during the EVALUATE ADDRESS step of an LC-3 LDR instruction. Therefore, the answer is incorrect.

You can learn more about MAR register at: brainly.com/question/15892454

#SPJ11

The given statement "the transport layer uses port numbers to identify the source and destination application-layer protocol of the data that it contains" is true. It is becasue the transport layer in the TCP/IP protocol suite uses port numbers to identify the source and destination application-layer protocol of the data that it contains.

Port numbers are 16-bit unsigned integers that range from 0 to 65535. The first 1024 port numbers are reserved for well-known services such as HTTP, FTP, and SMTP, while the remaining port numbers can be used by applications or services as needed. When data is sent from an application, the transport layer in the operating system adds a source port number to identify the application that is sending the data, and a destination port number to identify the application that is intended to receive the data.

When the data arrives at the destination, the transport layer uses the destination port number to deliver the data to the correct application.

You can learn more about transport layer  at

https://brainly.com/question/30426969

#SPJ11

To prevent users in your domain from running a common game on their machines, you can use AppLocker to create a rule that blocks the game's executable file from running.

Since the application does not have a digital signature, you can create a path rule that specifies the location of the executable file. To ensure that the rule applies even if the file is moved or renamed, you should use a publisher condition with a hash rule.

A publisher condition with a hash rule checks the digital signature of an executable file to ensure that it has not been tampered with or modified. Since the game does not have a digital signature, the hash rule will generate a unique identifier based on the file's content, and this identifier will be used to enforce the rule. By combining the publisher condition with the hash rule, you can prevent the game from running even if the file is moved or renamed to a different location.

You can learn more about executable file at

https://brainly.com/question/13166283

#SPJ11

Unlocking BitLocker without a password and recovery key can be challenging as BitLocker is designed to provide robust data protection. However, there are some methods you can try:

Check if the password is saved in the Microsoft account. If the password is saved, then you can use the Microsoft Account to unlock the drive.

Use a data recovery agent (DRA). If the BitLocker drive is part of an Active Directory domain, the domain administrator can use a DRA to unlock the drive.

Try using a BitLocker data recovery tool. Some third-party tools can unlock BitLocker-encrypted drives.

Try brute-forcing the password. This is not recommended as it is time-consuming and can damage the drive.

It's essential to remember that unlocking BitLocker without a password and recovery key is not a simple task, and there is always a risk of data loss or damage. Therefore, it's always recommended to keep a backup of the recovery key in a secure location.

To know more about recovery click here:

brainly.com/question/1528638

#SPJ4

The function of twists in twisted pair cables is to lessen crosstalk and electromagnetic interference (EMI) between adjacent lines.

Twists are the construction mechanism used in twisted pair cables, which are widely utilised in networking and data transfer applications. By twisting the wire pairs together, you can lessen crosstalk and electromagnetic interference (EMI) between the cable's adjacent wires. The degree of interference reduction is influenced by the tightness of the twists, with tighter twists offering stronger cancellation of EMI and crosstalk. Several varieties of twisted pair cables exist, each having a unique number of twists per unit length and other design features to enhance its performance for certain purposes. Twists in twisted pair cables are a crucial component for the dependable and effective transmission of digital signals over long distances.

Learn more about twists here:

https://brainly.com/question/29529586

#SPJ4

In accordance with "caso 1," an egg doesn't have the same value as a jar of jora chicha. In Wari culture, the egg was a symbol of wealth and status, and the jar of jora chicha was a ceremonial drink of great cultural and religious significance.

The incident described in the context of Wari culture is referred to as "caso 1". A group of people are faced with a choice of whether to trade a cra de oveja (sheep) for a jarrón de chicha de jora (jar of fermented corn beer). In the Wari society, where the exchange of items was based on symbolic and cultural meaning rather than solely utilitarian or economic value, this scenario exemplifies cultural values and conventions. The first scenario demonstrates how exchanging things was a difficult procedure that was influenced by social hierarchies, cultural values, and the social significance of objects.

Learn more about  "caso 1," here:

https://brainly.com/question/27822819

#SPJ4

We will use the construction in the proof of Theorem 1.45 to give the state diagrams of NFAs recognizing the union of the languages described in Exercises 1.6a and 1.6b, and Exercises 1.6c and 1.6f.

State diagrams of NFAs recognizing the union of the languages described in Exercises 1.6a and 1.6b

In Exercise 1.6a, we have L1 = {w : w contains an even number of 0s}.

In Exercise 1.6b, we have L2 = {w : w contains an odd number of 1s}.

Let's assume M1 is the NFA that recognizes L1, and M2 is the NFA that recognizes L2. Then, the NFA M for the union of L1 and L2 is obtained by adding a new start state that has ε-transitions to the start states of M1 and M2.

State diagrams of M1 and M2 are shown below: {(q0,0), (q1,1)}(q1,1)00,11(q0,0) 0,10,1

In the state diagram of M1, the double circle represents the accepting state. In the state diagram of M2, the accepting state is represented by a single circle with a dot in it.

The state diagram of the NFA M for the union of L1 and L2 is shown below: {S}(q0,0) 0,10,1(q1,1){M1}{M2}

The NFA M has a start state S that has ε-transitions to the start states of M1 and M2.

State diagrams of NFAs recognizing the union of the languages described in Exercises 1.6c and 1.6f

In Exercise 1.6c, we have L3 = {w : w starts and ends with the same symbol}.

In Exercise 1.6f, we have L4 = {w : w contains the substring 101}.

Let's assume M3 is the NFA that recognizes L3, and M4 is the NFA that recognizes L4. Then, the NFA M for the union of L3 and L4 is obtained by adding a new start state that has ε-transitions to the start states of M3 and M4. State diagrams of M3 and M4 are shown below:{q0}(q1) 0,10,1(q2) 0,10,1(q3) 0,10,1In the state diagram of M3, the double circle represents the accepting state. In the state diagram of M4, the accepting state is represented by a single circle with a dot in it.The state diagram of the NFA M for the union of L3 and L4 is shown below:{S}(q0) 0,10,1(q1) 0,1(q2) 0(q3){M3}{M4}The NFA M has a start state S that has ε-transitions to the start states of M3 and M4.

Learn more about State diagrams of NFAs here:

https://brainly.com/question/15520331

#SPJ11

The best solution for a computer support technician who is assigned to decide the best IEEE 802.11 WLAN solution for a small office installation is-

A. install an IEEE 802.11n/ac MIMO WLAN, disable ERP protection, and set the access point to channel 11.

IEEE- IEEE refers to the Institute of Electrical and Electronics Engineers, which is an organization that promotes technological innovations and excellence throughout the world. IEEE has set up numerous technological standards to enhance device performance and compatibility. IEEE 802.11 refers to a wireless networking standard, commonly known as Wi-Fi. WLAN stands for Wireless Local Area Network.

Problem in this case- Another business is utilizing an IEEE 802.11b WLAN operating on channels 1 and 6. The customer wants maximum throughput and does not need backward compatibility to IEEE 802.11b. Therefore, the channel numbers 1 and 6 are already occupied. This implies that channel 11 should be used instead.

ERP protection should be disabled to enhance the data transfer rate. The ERP protection may impact the transmission rates of an IEEE 802.11n WLAN, and the customer wants to achieve the maximum throughput. As a result, this option is selected. Hence, it can be concluded that the best solution for this installation is to install an IEEE 802.11n/ac MIMO WLAN, disable ERP protection, and set the access point to channel 11.

Therefore option A is the correct answer.

"IEEE", https://brainly.com/question/31143015

#SPJ11

Buying a ticket for a college football game where there are multiple windows to buy the ticket at features a multiple queue or multi-line queuing system.

In a multiple queue system, there are multiple waiting lines, and each line is assigned to a specific service station or window. Customers choose the line they want to join based on their preferences, such as the length of the queue or the location of the service station.

In the case of buying a ticket for a college football game, each window represents a service station, and customers can choose to join the line for the window that they prefer or that has the shortest waiting time.

This type of queuing system is often used in settings where there are multiple service stations, such as in retail stores, banks, or amusement parks, to reduce waiting times and improve customer satisfaction.

You can learn more about queuing system at

https://brainly.com/question/17137414

#SPJ11

Jiro is working on a research project. His topic is a programming language that was designed to teach programming and was very popular in the 1980s and 1990s. The most likely programming language that Jiro is researching is Pascal.

What is Pascal?

Pascal is a computer programming language that is named after Blaise Pascal, a French mathematician, physicist, and philosopher. It is an imperative, procedural programming language that was created in 1970 by Niklaus Wirth. Pascal was designed to encourage good programming practices using structured programming and data structuring. Pascal was initially designed to teach programming, and it quickly became a popular programming language because of its simplicity and ease of use.

Pascal was also widely used for scientific research, engineering, and business applications. Pascal was developed to improve on the shortcomings of the earlier programming languages like FORTRAN and COBOL. It was developed with a focus on simplicity and readability. Pascal features, including data structuring, data types, and syntax, allowed the creation of reusable and scalable software.

Why is Pascal important?

Pascal is important because it was one of the first programming languages that used procedural programming, which means that programs are divided into reusable and smaller subroutines. It is still used today, although it has been largely replaced by other programming languages, like C++. Pascal's impact can still be seen in modern programming languages, including Java, Python, and C++. Pascal has influenced many languages in a variety of ways. The significance of Pascal can be traced to its impact on the future of programming languages.

Learn more about Pascal here:

https://brainly.com/question/27918473

#SPJ11

If Iwina's media streaming device supports a transmission speed of up to 200 Mbps, I would recommend a wireless router that supports at least 802.11n wireless standard.

802.11n is a wireless networking standard that operates on both the 2.4 GHz and 5 GHz frequency bands. It offers higher speeds and greater range compared to earlier wireless standards, and is commonly used in home and small business networks.

Thus, if Iwina's media streaming device supports a transmission speed of up to 200 Mbps, I would recommend a wireless router that supports at least 802.11n wireless standard. This wireless standard supports a theoretical maximum speed of up to 600 Mbps, which should provide enough bandwidth to support Iwina's device. Alternatively, a router that supports the newer 802.11ac wireless standard could also be considered, as it offers even higher theoretical speeds.

Learn more about wireless router on:

https://brainly.com/question/30079964

#SPJ1

A fort's drawbacks include limiting your range of motion and making it difficult to organize a sizable force inside the fort prior to a combat. Forts are useful stopovers for lodging troops traveling a long distance outside of conflict.

A fort is a fortified military structure designed to protect a specific location or area from external threats. Forts can vary in size and shape, and can be constructed using a variety of materials and techniques. Some forts are built to withstand attacks from land or sea, while others are designed to protect natural resources such as water sources or transportation routes. Historically, forts have been used by armies and other military forces as defensive positions during battles and wars. Today, many forts have been repurposed as historical landmarks, museums, or tourist attractions.

Learn more about routes here brainly.com/question/18850324

#SPJ4

Information that enters your system could never be retrieved without a proper backup system in place.

Backup refers to creating copies of Information in case an original is lost or damaged. Backups can be used to restore data after a loss. Backup systems are one of the most important tools a company can have to protect its critical data.

The primary purpose of backup is to protect data that can be lost in the event of a catastrophic system failure or other data loss event. The secondary purpose is to recover data from an earlier time period if a backup is available. A backup system can provide significant cost savings to a business in terms of data loss prevention and recovery costs.

To know more about backup system:https://brainly.com/question/17355457

#SPJ11

If Mr. Lowe chooses to purchase a switch that only accommodates the organization's current need for two fiber-optic connections, he could have to replace the switch when the network is expanded.

Physical topology: This type of network topology describes how computer wires and other network devices are laid out.

A client/server protocol called Dynamic Host Configuration Protocol (DHCP) automatically assigns an Internet Protocol (IP) host with an IP address and other configuration data like the subnet mask.

To know more about network visit:-

https://brainly.com/question/14276789

#SPJ1

The correct answer is TCP and UDP are two transport layer protocols that are used for sending data over a network. The following three statements correctly describe their functions:

The TCP source port number identifies the sending host on the network: TCP uses a 16-bit source port field to identify the sending process or application on the host. This helps the receiving host to identify the source of the data. UDP segments are encapsulated within IP packets for transport across the network: UDP does not have any built-in error recovery mechanism, so it simply encapsulates its segments within IP packets and sends them over the network. The source port field identifies the running application or service that will handle data returning to the PC establishing a session with the server: Both TCP and UDP use the source and destination port fields to identify the applications or services that will handle the data. The source port field helps the server to identify the process or application that sent the data and establish a session with the PC. In summary, TCP and UDP are transport layer protocols that use source and destination port numbers to identify the sending and receiving hosts and the applications or services that will handle the data. UDP simply encapsulates its segments within IP packets, while TCP establishes a reliable, connection-oriented session between the hosts.

To learn more about transport layer click on the link below:

brainly.com/question/27961606

#SPJ1

Answer:

HTML Editor

Explanation:

its a program for editing HTML

If desired, certain of these services, like HTTP and HTTPS, can be set up to listen on different ports. Additionally, depending on their particular configuration, some services might use other ports or protocols.

The Internet Engineering Task Force (IETF) has approved TCP port 443 as the default HTTPS protocol. It provides a method of data encryption that may be used by web servers and browsers. HTTPS port 443 secures network traffic packets prior to data transmission.

HTTPS is HTTP with encryption. Since HTTPS uses TLS (SSL) encryption for even standard HTTP requests and responses, it is more secure than HTTP. This is the major distinction between the two words.

To know more about HTTP visit:-

https://brainly.com/question/30175056

#SPJ1

Your instance can receive traffic from port 3389 for RDP access from the CIDR block 72.14.0.0/16, and traffic from port 80 for HTTP access from all IPs, given the CIDR block 0.0.0.0/0.

The traffic that can reach your instance: Traffic from CIDR block 72.14.0.0/16 and from any IP to port 80. AWS security groups are like the iptables firewall. You can specify the allowed inbound and outbound traffic for an instance. When a security group is first created, there are no inbound or outbound rules enabled by default, which indicates that all inbound or outbound traffic to the instance is denied. This prevents your instances from being compromised by any unauthorized users, network scans, or remote control of your devices.

You can create a security group for your instance or launch an instance and pick the pre-existing security group. A security group's guidelines decide the inbound network traffic that it would allow into the instances it protects, as well as the outbound network traffic that those instances will transmit to other destinations. The following is the traffic that can reach your instance from the following security groups: Remote desktop protocol (RDP) access over port 3389 from CIDR block 72.14.0.0/16.HTTP access over port 80 from CIDR block 0.0.0.0/0.

Read more about the outbound :

https://brainly.com/question/15216234

#SPJ11

This type of online tracking system is known as geo-fencing. It uses GPS or RFID technology to determine a user's location and send relevant content based on that location.

A geofencing system is a type of online tracking system that enables businesses and organizations to identify when mobile devices cross predetermined boundaries. In the context of retail, geofencing refers to the use of GPS, RFID, or Wi-Fi technology to track and communicate with customers who have downloaded store apps. It uses GPS or radio frequency identification (RFID) to establish a virtual perimeter or fence around a specific geographic area. Geofencing technology, in the context of retail, allows retailers to trigger mobile alerts to customers who have installed their apps and are nearby, offering them discounts and other product information. The store app may use this technology to track shoppers as they progress through the store, sending them discounts and product information. Geofencing has become a popular tool in the retail sector because it enables retailers to send customers targeted marketing messages based on their location. Geofencing technology provides retailers with a new way to reach customers by providing them with hyper-relevant, location-specific promotions and deals that they would not have access to otherwise.

To learn more about geofencing from here:

brainly.com/question/27929238

#SPJ11

The given statement "Derek wants to remove columns from Query he doesn't need. To do so, he can select the columns he wants to remove with Ctrl+Click. Then he can select Remove Columns > Remove Columns in the Query Editor ribbon" is True.

In Microsoft Office Access, the ribbon is the strip of tabs and icons that sits above the work area. It contains the fundamental commands for working with a database. The Ribbon is a context-sensitive tool that displays the commands that are relevant to the task being performed, such as table design or form creation.

The Query Editor Ribbon, located at the top of the Microsoft Power Query editor window, provides quick access to various commonly used commands. To remove columns from Query in Microsoft Power Query Editor, you can select the columns you want to remove with Ctrl+Click.

Then, in the Query Editor Ribbon, you can select Remove Columns > Remove Columns. The selected columns will be removed from the Query.

You can learn more about Query Editor at: brainly.com/question/30154538

#SPJ11

The best location to install an omnidirectional antenna that is connected to a wireless access point is in a spot that is relatively high up, away from obstructions such as large trees or buildings. It should be placed as close to the center of the wireless access point's coverage area as possible to maximize signal strength.

The higher the wireless access point, the more coverage it can provide. This would enable a stronger signal and a wider coverage area. Hence, the most optimal place for an omnidirectional antenna would be on the rooftop or as close to the ceiling as possible.

By installing the antenna higher, the signal of the wireless access point would be less obstructed by barriers such as walls, furniture, and other electronic devices. This would enable the signal to travel further and reach more devices.

Therefore, it is crucial to choose a location for the omnidirectional antenna that provides the best coverage possible. The best place for an omnidirectional antenna is in a central location that can reach all the devices that need to be connected.

Learn more about wireless access point here:

https://brainly.com/question/27334545

#SPJ11

As an administrator for the Westsim domain, the Organizational Units (OUs) have been created for each company department. All user and computer accounts for each department have been moved into their respective department OUs.

An Organizational Unit (OU) is a container object within an Active Directory that can contain other objects, including other OUs. OUs are created to facilitate the administration of users, computers, and other directory objects. An OU can have policies and permissions applied to it that are distinct from those of other OUs. These containers organize objects within the AD, making it simpler to implement administrative assignments and deploy Group Policy Objects (GPOs). What is Active Directory (AD)?Active Directory (AD) is a directory service that is utilized in Windows environments to centrally manage authentication and authorization for users, computers, and other network resources. It works by combining information about user accounts, computer accounts, and other resources into a central database.

Learn more about Organizational Units (OUs): https://brainly.com/question/13440440

#SPJ11