Compute the terminal velocity of a spherical raindrop of diameter 0.05 inches. Assume it falls through air at standard sea level conditions DISCUSSION: How does the terminal velocity vary with droplet diameter?

The rate of heat transfer by convection (kW) when the convective heat transfer coefficient is 7.2 W/Km², the surface area is 16 m², and the surface temp. is 317 K, and the surrounding temp. is 429 K.

Heat transfer is the method of exchanging heat energy from one location to another. The three methods of heat transfer are conduction, convection, and radiation. The rate of heat transfer by convection is given by;

Q = h.A (T surrounding - T surface)

Where Q is the rate of heat transfer by convection h is the convective heat transfer coefficient A is the surface area t surface is the surface temperature t surrounding is the surrounding temperature Given, h = 7.2 W/Km²

A = 16 m²t

surface = 317 Kt surrounding = 429 K.

Substitute the given values into the formula;

Q = 7.2 × 16 × (429 - 317)Q = 7.2 × 16 × 112Q = 12902.4 W = 12.902 kW

Therefore, the rate of heat transfer by convection is 12.902 kW.

learn more about heat transfer at: brainly.com/question/30416117

#SPJ11

The efficiency of the engine will increase as the sink temperature is lowered. The efficiency of a heat engine is determined by the difference between the input reservoir temperature and the sink temperature.

If the input reservoir temperature remains constant, the efficiency of the engine will increase as the sink temperature decreases.An engine's thermal efficiency is a measure of the work it can do compared to the energy it consumes.

The efficiency of the engine is equal to the amount of work done by the engine divided by the amount of energy consumed by it. It is typically given as a percentage, with the ideal efficiency being 100 percent.Thermal efficiency is influenced by both the input temperature and the sink temperature

. The engine's efficiency increases as the input temperature rises and the sink temperature decreases. The efficiency of the engine decreases as the input temperature decreases or the sink temperature rises.

Learn more about engine thermal at

https://brainly.com/question/10678395

#SPJ11

The complete function for the conversion, integer array and char array is determined.

1) The function to_upper() should take in a lowercase letter c as an argument and return its uppercase equivalent. The following code snippet should do the trick:
char to_upper(char c) {
 return c - 32;
}

2) The function arg_max() should take in an integer array nums and its length len as arguments and return the index of the largest member. The following code snippet should do the trick:
int arg_max(int nums[], int len) {
 int index_of_max = 0;
 for (int i=1; i nums[index_of_max])
     index_of_max = i;
 }
 return index_of_max;
}

3) The function to_binary() should take in a character array binary and an unsigned integer n as arguments and convert the integer into its binary format and store the result in the character array. The following code snippet should do the trick:
void to_binary(char binary[], unsigned int n) {
 int i = 0;
 while (n > 0) {
   binary[i] = n % 2 + '0';
   n = n / 2;
   i++;
 }
 for (int j=i; j<33; j++)
   binary[j] = '0';
 binary[32] = '\0';
}

Learn more about Integer array here:

https://brainly.com/question/29413848

#SPJ11

The correct answer is B. Evaluation of the training program's results. The instructional design process is a systematic approach to designing effective training programs.

The process consists of several stages, including needs assessment, designing learning objectives, creating instructional materials, and delivering the training program.

Evaluation involves assessing the effectiveness of the training program in achieving its intended outcomes. This includes determining whether the learning objectives were met, assessing the participants' knowledge and skills before and after the training, and gathering feedback from the participants about the training experience.

The evaluation process helps to determine the success of the training program and identify areas for improvement in future training programs. By conducting a thorough evaluation, organizations can ensure that their training programs are effective, efficient, and impactful in helping employees acquire the necessary skills and knowledge to perform their jobs successfully.

To know more about instructional design click here:

brainly.com/question/28563911

#SPJ4

Energy saved = 21,900 kWh per year

Fuel Saved = 730 liters

Let's dive deeper into the details below.

One can save energy in various ways, such as walking up a floor instead of taking the elevator, walking, or riding a bike for an hour a day instead of driving a car. Here are some ways in which energy can be saved:

1. Turning off lights and electronics when they're not in use

2. Using energy-efficient light bulbs

3. Reducing water usage

4. Using public transportation, biking, or walking instead of driving a car

5. Installing a programmable thermostat

6. Purchasing energy-efficient appliances

7. Using natural light to save energy

8. Properly insulating homes to save energy

9. Upgrading to energy-efficient windows and doors

10. Planting trees and shrubs to shade your home and keep it cool during the summer.

11. Weatherizing your home to keep heat in during the winter.

Assumptions: Let's assume that there are three floors in a building, and each floor has five rooms, and each room has four tube lights (40 watts each) that run for ten hours each day. Now, if we replace these tube lights with LED lights, which consume ten watts each, we can save 30*5*4*40 = 60,000 watts per day.

It will be equal to 60 kWh per day or 21,900 kWh per year.

Assumptions: Let's assume that you drive 20 km every day, and your car's average fuel consumption is 10 km per liter of petrol. If you ride a bicycle instead of driving a car for one hour each day, you can save 20/10 = 2 liters of petrol per day.

It will be equal to 730 liters of petrol per year.

Learn more about energy.

brainly.com/question/1932868

#SPJ11

True. A torpedo level is a short level that is commonly used in construction and woodworking. It typically has a length of about 9 inches and is designed for portability and convenience.

The level uses an air bubble located inside a liquid-filled vial to establish plumb and level references. When the bubble is centered between two lines marked on the vial, the object being measured is level or plumb. Torpedo levels are useful for a wide range of applications, including installing cabinets, leveling shelves, and hanging pictures. They are also commonly used by plumbers and electricians for rough-in work.

Find out more about torpedo level

brainly.com/question/23105041

#SPJ4

A pattern program which has a pyramid shape is called the pyramid program in Java.

package javaprograms;

import java.util.Scanner;

public class PatternHalfPyramid {

   public static void halfPyramid(int n)  { 

       int i, j;  

       for(i=0; i<n; i++)  { 

           System.out.print(" "); 

           for(j=0; j<=i; j++)  {  

               System.out.print("* "); 

           }           

           System.out.println(); 

     } 

   }

   //    Main Function

   public static void main(String args[]) {  

       Scanner scan = new Scanner(System.in);

       System.out.print("Enter a height : ");

       int num = scan.nextInt(); 

       if (num >0) {

           halfPyramid(num); 

       }

       else {

           System.out.print("Try Again! Kindly enter height more than 0 ");

           System.exit(0);

       }

   } 

}

To know more about Pyramid, click on the link :

https://brainly.com/question/13057463

#SPJ1

The statements are labeled as T (true) or F (false) given below:

A systematic uncertainty is defined as the possible unknown measurement variation that does not randomly vary from data point to data point. Random uncertainty causes one measurement to differ from the next.

Learn more about systematic uncertainty at:

https://brainly.com/question/13436423

#SPJ11

No, we cannot use a single jump instruction to go from PC = 0x00004000 to PC = 0x20014924, since the jump instruction can only jump to a location within a certain range of the current PC value.

To jump to 0x20014924, we would need to use a combination of instructions, such as a branch instruction and a jump instruction. Here is an example of how we could do this:

Add the immediate value 0x20010924 to the current PC value 0x00004000 using the addi (add immediate) instruction:

addi $t0, $zero, 0x20010924

add $t0, $t0, $zero

Branch to the new address using the jalr (jump and link register) instruction:

jalr $zero, $t0, 0

The immediate value for the addi instruction would be 0x20010924, and the immediate value for the jalr instruction would be 0, since we want to jump to the address stored in register $t0.

To know more about range click here:

brainly.com/question/28135761

#SPJ4

Out of the given options, the one for which AWS will provide direct 24/7 support to all users - even those on the Basic support plan is: help with infrastructure under a massive denial-of-service (DoS) attack.

Amazon Web Services provides support to users that are experiencing issues with the AWS infrastructure. Direct 24/7 support is provided by AWS to all users - even those on the Basic support plan - to help with infrastructure under a massive denial-of-service (DoS) attack. AWS provides a wide range of reliable, scalable, and cost-effective cloud computing services.

In order to optimize its performance, AWS provides a range of benefits and services, such as flexibility, simplicity, cost-effectiveness, performance, and security. With AWS, you can reduce your IT infrastructure costs while increasing your operational efficiency. AWS allows you to be more agile, innovate faster, and respond quickly to market demands while reducing the total cost of ownership (TCO) and benefiting from the scale, reliability, and security of the AWS Cloud.

For more such questions on AWS

https://brainly.com/question/30176133

#SPJ11

The CO molecule's initial excited vibrational state has a displacement from the equilibrium bond distance that is most likely 0.2262 Angstroms.

A diatomic molecule vibrates similar to two masses being supported by a spring, and its potential energy is proportional to the square of the deviation from equilibrium. But the quantized energy levels have values that are evenly spaced apart. The frequency in this form corresponds to the simple harmonic oscillator's traditional form.

[tex]x = √(h/2μω)(2(1)+1/2) = √(h/2(1.14x10^-27 kg)(6.505x10^13 Hz))(3/2)[/tex]

[tex]x = 2.262 x 10^-11 meters[/tex]

Converting to angstroms, we get:

x = 0.2262 Angstroms (rounded to 4 decimal places)

To know more about equilibrium visit:-

https://brainly.com/question/13258910

#SPJ1

195.96 degrees C and  -59.35 kW is the temperature of the steam after the flashing process and the power output from the turbine if the pressure of the steam at the exit of the flash chamber is 1 MPa.

To solve this problem, we need to apply the energy balance and the steam table.

First, we need to determine the state of the geothermal water before the flashing process. Since it enters the flash chamber as a saturated liquid, we can use the steam table to find its properties at the given temperature of 230 degrees C:

h1 = hf + x * hfg = 834.46 kJ/kg (from the steam table)

where h1 is the enthalpy of the geothermal water, hf is the enthalpy of the saturated liquid at 230 degrees C, hfg is the enthalpy of vaporization at 230 degrees C, and x is the quality of the water (which is 0 since it is a saturated liquid).

Next, we need to find the state of the steam after the flashing process. We know that the pressure at the exit of the flash chamber is 1 MPa, and we can assume that the process is adiabatic (no heat transfer). Using the steam table, we can find the enthalpy and quality of the steam at this pressure:

hf = 191.81 kJ/kg (from the steam table)

hfg = 1984.4 kJ/kg (from the steam table)

hg = hf + hfg = 2176.21 kJ/kg

x = (h1 - hf) / hfg = 0.314

where hg is the enthalpy of the saturated vapor at 1 MPa.

Therefore, the temperature of the steam after the flashing process can be found by interpolation:

Tg = 230 + x * (Tsat(1 MPa) - 230) = 230 + 0.314 * (184.97 - 230) = 195.96 degrees C

where Tsat(1 MPa) is the saturation temperature at 1 MPa (from the steam table).

Finally, we can use the steam table again to find the enthalpy of the steam at the exit of the turbine:

hf = 96.83 kJ/kg (from the steam table)

hfg = 2434.4 kJ/kg (from the steam table)

hg = hf + x * hfg = 835.63 kJ/kg

where x is the quality of the steam, which is given as 5%.

Therefore, the power output from the turbine can be calculated as:

P = m * (h1 - hg) = 50 * (834.46 - 835.63) = -59.35 kW

The negative sign indicates that the turbine is consuming power instead of generating power. This is because the quality of the steam at the exit of the turbine is only 95%, which means that there is some moisture content that needs to be removed. To improve the power output, we can use a moisture separator or a reheater to increase the quality of the steam.

To learn more about pressure visit;

https://brainly.com/question/12971272

#SPJ4

Correct question:

In a single-flash geothermal power plant, geothermal water enters the flash chamber (a throttling valve) at 230 dgrees C as a saturated liquid at a rate of 50 kg/s. The steam resulting from the flashing process enters a turbine and leaves at 20 kPa with a moisture content of 5%. Determine the temperature of the steam after the flashing process and the power output from the turbine if the pressure of the steam at the exit of the flash chamber is 1 MPa.

The amount of energy derived from an electric source, commonly measured in volts is called voltage.

Step by step explanation:

Voltage is the electric potential difference between two points in a circuit, which measures the energy needed to move a unit charge from one point to another. The unit for measuring voltage is the volt (V). Voltage is frequently known as electric potential, electric tension, and electric pressure. Voltage can be defined as the amount of potential energy transferred from an electric source to an electric load per unit charge.

The formula for voltage is: V = W / Q

where V represents voltage, W represents work, and Q represents charge. Voltage is measured in volts (V). Voltage can be changed by using a transformer in a circuit, which can raise or decrease the voltage of an AC power supply. A transformer can be used to raise or decrease the voltage of an AC power supply in a circuit. Voltage regulation can also be achieved with a voltage regulator, which can maintain a fixed voltage level despite changes in load resistance or input voltage.

Learn more about source and volts at: https://brainly.com/question/17257390

#SPJ11

The statement that "In a stress-strain curve of a tension test, the slope of stress strain plot, which is proportional to the elastic modulus, depends on electronic configurations and strengths of atomic bonds of materials" is true because when the bonds are weaker, and the electrons are less tightly bound to the atoms, the material is more elastic, and the modulus of elasticity is low. So, we can say that the slope of the stress-strain curve, which is proportional to the elastic modulus, depends on electronic configurations and strengths of atomic bonds of materials.

In a stress-strain curve, the slope of the curve is the measure of the modulus of elasticity, or Young's modulus. This modulus, which is also known as the elastic modulus, measures the resistance of a material to elastic deformation, which means it measures how much a material will stretch when a force is applied to it. The elastic modulus is an important property of materials, and it is used to determine the mechanical behavior of a material, including its strength, stiffness, and ductility.

Elastic modulus is dependent on the electronic configurations and strengths of atomic bonds of materials. A material's modulus of elasticity is affected by the strength of the bonds between atoms, and by the number of electrons in the outermost shells of the atoms. When the bonds are strong, and the electrons are tightly bound to the nuclei of the atoms, the material is less elastic, and the modulus of elasticity is high.

Learn more about elastic modulus here: https://brainly.com/question/30402322

#SPJ11

Aerospace Engineering, Manufacturing Engineering, Chemical Engineering, Materials Engineering, Electrical Engineering, Civil Engineering, Mechanical Engineering, Biotechnical Engineering, and Computer Engineering. All of the above options are examples of Engineering disciplines.

        Engineering is a subject that involves the application of mathematical and scientific principles to design and develop systems that benefit society.

        Engineering is a broad subject with a wide range of subfields, each with its distinct field of study and applications. These subfields, also known as engineering disciplines, include chemical engineering, mechanical engineering, electrical engineering, and so on.

The following are examples of engineering disciplines:

         Aerospace engineering, manufacturing engineering, chemical engineering, Materials engineering, electrical engineering, civil engineering, Mechanical engineering, biotechnical engineering, and computer engineering

         So, the answer is all of the above-given options are examples of Engineering disciplines.

To learn more about Engineering disciplines visit: https://brainly.com/question/14241236

#SPJ11

Answer:

all of the above

Explanation:

Depending on the particular network requirements and setups, a computer may need to be configured for IP address and all of the aforementioned options in order to function on a modern network.

Switches, routers, and access points are required for a computer network to function. Switches use cables to connect to networks in homes or offices and aid with internal security for computers and other devices.

a DNS server and a gateway. DHCP in Use. the method by which a client set up to use DHCP makes an effort to obtain network configuration. DHCP discovery is the process of gathering data. DHCP's discovery procedure.

To know more about IP address visit:-

https://brainly.com/question/16011753

#SPJ1

The formatting flag that indicates that floating-point values should be output with a thousands separator is the comma (,) flag. Thus, Option C is correct.

A floating-point number is a numerical data type that contains a decimal point (fractional part) and an exponent (exponential notation). These values are saved as base-2 numbers in the memory of the computer. The term "floating-point" refers to the fact that the decimal point can be put at any location (i.e., it can "float"), which provides the number with a greater range than other numerical data types.

Floating-point numbers are represented in computers using IEEE 754 standard floating-point arithmetic. Floating-point numbers are commonly used to represent real numbers in scientific and engineering applications. They are stored in a fixed amount of memory and have a limited precision, which can lead to rounding errors in calculations.

It is important to understand the limitations of floating-point arithmetic when working with numerical data in computer programming.

Option C holds true.

Learn more about floating-point number https://brainly.com/question/30431585

#SPJ11

The transfer function of the given system is Y(s)/R(s) = G1 * (G2 + G3). To find the transfer function Y(s)/R(s) of the given system using Mason's rule.

The forward path is the path that starts from the input R(s) and ends at the output Y(s). In the given system, there is only one forward path, Individual loops are the loops that do not contain any other loops inside them. In the given system, there are two individual loops.

Non-touching loops are the loops that do not share any nodes with each other. In the given system, there are no non-touching loops.

Now, we can apply Mason's rule to find the transfer function Y(s)/R(s). The formula for Mason's rule is:

Y(s)/R(s) = (sum of individual loop gains) / (1 - sum of non-touching loop gains)

Using the above formula, we get:

Y(s)/R(s) = ((G1 * G2) + (G1 * G3)) / (1 - 0)

Y(s)/R(s) = (G1 * (G2 + G3)) / (1)

Y(s)/R(s) = G1 * (G2 + G3)

To know more about transfer function visit:-

brainly.com/question/21684948

#SPJ1

The address of the element stored at arr[20][30] in the 2-D array declaration char Arr[100][100] would be 30 + 20 * 100 = 2030.

The declaration of the 2-D array is shown below:

char Arr[100][100]

Here, Arr is a 2-D array consisting of 100 rows and 100 columns. This means that there are a total of 10,000 elements in this array. Each element of this array is of type char. Therefore, each element will occupy a single byte of memory.

The array is byte-addressable. This means that each element of the array is accessible using its byte address. Since each element occupies a single byte of memory, the byte address of an element is the same as its memory address.

To calculate the address of the element stored at arr[20][30], we first need to understand how the elements are stored in the array.

The elements of a 2-D array are stored in row-major order. This means that the elements of the first row are stored first, followed by the elements of the second row, and so on. Within a row, the elements are stored from left to right.Now, to calculate the address of the element stored at arr[20][30], we need to calculate the byte address of this element. Since the array is byte-addressable, we can calculate the byte address of an element by multiplying its row number by the number of columns in the array and adding its column number. This gives us the following formula:

Byte Address of Element = Base Address + (Row Number * Number of Columns + Column Number)

Since the base address of the array is 0, we can simplify this formula to:

Byte Address of Element = Row Number * Number of Columns + Column Number

Using this formula, we can calculate the byte address of the element stored at arr[20][30] as follows:

Byte Address of Element = 20 * 100 + 30 = 2030

Therefore, the address of the element stored at arr[20][30] is 2030.

Learn more about 2-D array declaration here:

https://brainly.com/question/26104158

#SPJ11

The following is used to process and display browser database application forms, reports, and queries: Web Application Server (WAS) is a server that uses web application server technology to deliver web-based applications.

It is a program that manages user requests for web pages and is responsible for generating content that is returned to the user's browser. A Web Application Server is responsible for translating browser requests into database queries that generate the desired output in the form of web pages. A web application server's primary purpose is to deliver web pages that are dynamically generated.

When web users request information from a database via an application, the web application server will interact with the database on the user's behalf. The following are some of the features of web application servers: Database connectivity support is provided. Session management is supported.

Security authentication and authorization for users is provided. Processing of complex business logic is supported. Support for multiple languages is provided. Logging and auditing capabilities are provided in a web application server. A web application server's core responsibility is to provide a runtime environment for web applications. It enables developers to create and deploy applications that can be accessed via the web.

For more such questions on Web Application Server

https://brainly.com/question/26281028

#SPJ11

In accordance with the ASHRAE standard, a pressure relief rating discharge or fusible plug must be installed not less than 20 feet from any window, ventilation opening, or outlet in any building and 15 feet above ground level.

The American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE) is an international technical society focused on the fields of heating, ventilating, air-conditioning, and refrigeration engineering. It was founded in 1894 and is headquartered in Atlanta, Georgia. Its primary mission is to advance the arts and sciences of HVAC&R engineering.

To maintain safety, pressure relief valves are an essential part of any pressurized vessel. Pressure relief valves are critical components of many different types of systems used in various industries. Valves play a crucial role in ensuring that systems operate safely and efficiently.

The discharge from a pressure relief valve or fusible plug must be installed in accordance with the ASHRAE standard in a location that is not less than 20 feet from any window, ventilation opening, or exit in any building and 15 feet above grade. ground.

A pressure relief valve is a safety mechanism used to control and release pressure within a tank, pipeline, or other container in a system. Pressure relief valves, also known as safety valves, are used in a variety of applications, including steam boilers, pressure vessels, and pipelines.

They are essential components of any pressurized system, as they protect the system from catastrophic failure or damage.

See more information about ASHRAE at: https://brainly.com/question/17463661

#SPJ11

The magnitude of normal stress is greatest at point D. Point A in the triangular cross-section of a homogeneous beam subjected to a pure bending moment.

The cross-section of a homogeneous beam of triangular cross-section, the point of the cross-section where the magnitude of normal stress is the greatest is Point C.

Normal stress is a type of stress that occurs in a member when a force is applied perpendicular to the member's cross-section. It is calculated using the formula: σ = F/A

Where,σ = normal stress, F = the applied force, and A = the cross-sectional area of the member.

Now, let us consider the cross-section of the beam in question:

The centroid of the cross-section is at point C. This means that the cross-section is symmetric with respect to the y-axis. When a pure bending moment is applied to the beam, it causes the top of the beam to compress and the bottom of the beam to stretch. This creates a normal stress that is maximum at the top and minimum at the bottom.

Since the cross-section is symmetric, this maximum normal stress will occur at a point equidistant from the top and bottom of the beam. This point is point C. Therefore, the point of the cross-section where the magnitude of normal stress is the greatest is Point C.

Learn more about cross-section at:

https://brainly.com/question/28257972

#SPJ11

The given problem is asking for the formulas of x(t) and y(t) that could represent the parametric curve (x(t), y(t)).

What is parametric curve?

Parametric curve is the curve that is defined by equations of the form [tex]x=f(t)[/tex] , [tex]y=g(t)[/tex] where t is the parameter.

So, for a given value of t, x and y coordinates can be found by plugging in that value of t. Different values of t will give different points on the curve.

To find the formulas for x(t) and y(t), the following steps can be used:

Step 1: Identify the shape of the curve. Based on the shape of the curve, we can come up with the equation of the curve.

Step 2: Break the curve into x(t) and y(t) components.

Step 3: Choose a parameter to represent the curve. Typically, we use t as the parameter.

Step 4: Determine the x(t) and y(t) components of the curve based on the chosen parameter.

Step 5: Write the equations of x(t) and y(t).

The equations can be simple linear equations or more complex nonlinear equations.

For example, consider a circular path. The equation of a circle can be represented as [tex](x-a)^2+(y-b)^2=r^2[/tex]

Where a and b represent the coordinates of the center of the circle, and r is the radius of the circle.

To find x(t) and y(t), we can rewrite the equation of the circle as: [tex]x=a+r cos(t)[/tex] and [tex]y=b+r sin(t)[/tex]

where t is the parameter.

So, for different values of t, we can get different points on the circle.

Learn more about Parametric curve here:

https://brainly.com/question/30482587

#SPJ11

The following answer option is not one of the ways of protecting intellectual property: Planting evidence in another company's office.

Intellectual property refers to creative works or inventions that have a commercial purpose or application. Intellectual property is classified as either industrial property or copyright. Patents, trademarks, industrial designs, and geographical indications are examples of industrial property. Copyright refers to literary and artistic works like books, films, and music, as well as architectural and graphic designs.The legal protection of intellectual property rights:There are various ways to legally protect intellectual property rights, including:PatentTrademarkCopyrightTrade SecretIndustrial Design Plant Varieties.

This answer the question: " which of the following answer options is not one of the ways of protecting intellectual property?"

Learn more about Intellectual property: https://brainly.com/question/1078532

#SPJ11

Yes, the job can be performed on the 20 hp lathe given the provided values and using Table 20.2 to obtain the appropriate unit horsepower value.

First, we need to find the actual horsepower available from the lathe, taking into account its efficiency. To do this, multiply the lathe's horsepower by its efficiency: 20 hp * 0.92 = 18.4 hp.

Next, we'll use Table 20.2 to find the appropriate unit horsepower value for alloy steel with a hardness of 325 HB. In this case, the unit horsepower is 5.8 hp/in³/min.

Now, we need to calculate the material removal rate (MRR). MRR is given by the formula: MRR = Cutting Speed * Feed * Depth of Cut. In our case, MRR = 375 ft/min * 0.030 in/rev * 0.150 in = 1.6875 in³/min.

Finally, we need to determine the required horsepower for the operation. To do this, multiply the unit horsepower by the MRR: Required Horsepower = 5.8 hp/in³/min * 1.6875 in³/min = 9.7875 hp.

Since the actually available horsepower from the lathe (18.4 hp) is greater than the required horsepower for the operation (9.7875 hp), the job can be performed on the 20 hp lathe.

Learn more about horsepower at:

https://brainly.com/question/14783214

#SPJ11

Discounting the cash flows over 4 years and the 8.5 % per year MARR, the present worth of the investment would be $205,861.62.

how we know that?

The engineering team at Manuels Manufacturing, Inc., is planning to purchase an enterprise resource planning (ERP) system. To calculate the present worth of each investment, we will use the discounted cash flow method and 4-year planning horizon, with a 8.5 % per year MARR (i.e. discount rate).

For Vendor A, the initial cost is $425,000, and the expected annual increase in revenue is $140,000. Discounting the cash flows over 4 years and the 8.5 % per year MARR, the present worth of the investment would be $323,096.97.

For Vendor B, the initial cost is $250,000, and the expected annual increase in revenue is $105,000.

Learn more about Manuels Manufacturing
brainly.com/question/14230342

#SPJ11

The entropy change of helium during an irreversible process can be calculated using the formula ΔS = cv × ln(T2/T1).

How can you calculate the entropy change of helium during an irreversible process?

The entropy change of helium during the process assuming the process is irreversible is

0.214 Btu/R

Here is how to solve it: Entropy (S) can be defined as the measure of disorder or randomness of a system. The entropy change of helium during the process assuming the process is irreversible can be calculated as follows:

ΔS = cv × ln(T2/T1)

where've is the constant volume specific heat of helium at

room temperature = 0.753 Btu/lbm-Rln

is the natural logarithmT2 is the final temperature of the heliumT1 is the initial temperature of the helium.R is the

gas constant of helium = 0.4961 Btu/lbm-R

T1 is not given, so let us assume that it is the

room temperature of 298 K

The temperature at the end of the process is not given, so we will solve the equation using a variable for

T2.ΔS = cv × ln(T2/T1)ΔS

= 0.753 × ln(T2/298)ΔS

= 0.753 × (ln T2 - ln 298)ΔS

= 0.753 ln T2 - 0.753 ln 298

Rearranging the equation,

ΔS = 0.753 ln T2 - 0.214

Therefore, the entropy change of helium during the process assuming the process is irreversible is 0.214 Btu/R.

Learn more about:entropy change

brainly.com/question/30691597

#SPJ11

Critical-thinking abilities link and arrange concepts. They are classified into three types: analysis, inference, and assessment. or count 0 to SIZE - 1 step 1

What is a case based approach?

Students are engaged in discussion of particular scenarios that approximate or are generally real-world examples while using a case-based method. This technique is learner-centered, with participants interacting intensely as they gain their knowledge and work as a group to investigate the case.

A crucial instance case focuses on a one-of-a-kind scenario with no specified aim. For example, a veteran suffering from severe PTSD may be examined in order to uncover strategies to alleviate his condition. Ethics play an important role in the case study process, and the majority of case studies require ethical approval.

Learn more about Critical-thinking

https://brainly.com/question/12980631

#SPJ1

The option that defines how positions are measured on the background in the following background property: position.

Positions are the places or orientations of objects relative to each other. They are used to describe the orientation of a physical object in space, or the physical location of an object in a two-dimensional or three-dimensional environment. Positions can be described in terms of x, y and z coordinates, which are used to denote the position of an object in a three-dimensional space. Positions can also be described in terms of angles and distances, which are used to denote the orientation of an object in a two-dimensional space. Positions can be used to describe the location of an object in relation to another object in a scene, or the relationship between different objects in the same scene.

To learn more about positions

https://brainly.com/question/17422777

#SPJ1