On a scale of 1-10 how would you rate your pain

Answer:

The three elements that make up the number's 32 bit single precision IEEE 754 binary floating point representation:

Sign (1 bit) = 0 (a positive number)

Exponent (8 bits) = 0111 1100

Mantissa (23 bits) = 000 0000 0000 0000 0000 0000

Explanation:

1. First, convert to the binary (base 2) the integer part: 0.

Divide the number repeatedly by 2.

Keep track of each remainder.

We stop when we get a quotient that is equal to zero.

division = quotient + remainder;

0 ÷ 2 = 0 + 0;

2. Construct the base 2 representation of the integer part of the number.

Take all the remainders starting from the bottom of the list constructed above.

0(10) = 0(2)

3. Convert to the binary (base 2) the fractional part: 0.125.

Multiply it repeatedly by 2.

Keep track of each integer part of the results.

Stop when we get a fractional part that is equal to zero.

#) multiplying = integer + fractional part;

1) 0.125 × 2 = 0 + 0.25;

2) 0.25 × 2 = 0 + 0.5;

3) 0.5 × 2 = 1 + 0;

4. Construct the base 2 representation of the fractional part of the number.

Take all the integer parts of the multiplying operations, starting from the top of the constructed list above:

0.125(10) =

0.001(2)

5. Positive number before normalization:

0.125(10) =

0.001(2)

6. Normalize the binary representation of the number.

Shift the decimal mark 3 positions to the right so that only one non zero digit remains to the left of it:

0.125(10) =

0.001(2) =

0.001(2) × 20 =

1(2) × 2-3

7. Up to this moment, there are the following elements that would feed into the 32 bit single precision IEEE 754 binary floating point representation:

Sign: 0 (a positive number)

Exponent (unadjusted): -3

Mantissa (not normalized):  1

8. Adjust the exponent.

Use the 8 bit excess/bias notation:

Exponent (adjusted) =

Exponent (unadjusted) + 2(8-1) - 1 =

-3 + 2(8-1) - 1 =

(-3 + 127)(10) =

124(10)

9. Convert the adjusted exponent from the decimal (base 10) to 8 bit binary.

Use the same technique of repeatedly dividing by 2:

division = quotient + remainder;

124 ÷ 2 = 62 + 0;

62 ÷ 2 = 31 + 0;

31 ÷ 2 = 15 + 1;

15 ÷ 2 = 7 + 1;

7 ÷ 2 = 3 + 1;

3 ÷ 2 = 1 + 1;

1 ÷ 2 = 0 + 1;

10. Construct the base 2 representation of the adjusted exponent.

Take all the remainders starting from the bottom of the list constructed above:

Exponent (adjusted) =

124(10) =

0111 1100(2)

11. Normalize the mantissa.

a) Remove the leading (the leftmost) bit, since it's allways 1, and the decimal point, if the case.

b) Adjust its length to 23 bits, by adding the necessary number of zeros to the right.

Mantissa (normalized) =

1 000 0000 0000 0000 0000 0000 =

000 0000 0000 0000 0000 0000

12. The three elements that make up the number's 32 bit single precision IEEE 754 binary floating point representation:

Sign (1 bit) = 0 (a positive number)

Exponent (8 bits) = 0111 1100

Mantissa (23 bits) = 000 0000 0000 0000 0000 0000

Answer:

It represents processing box

Answer:

Dear Mr./Mrs (Employer's name), I am writing this in response to the ad, which you have listed in the newspaper (mention the name here) for the post of a chemistry teacher. I believe my extensive knowledge and writing skills make me an excellent candidate for the post.

Answer:

Explanation:

If the HDD is spinning, this means that the power cable is correctly connected and that the drive is receiving power and powering on. However, this does not mean that the HDD is functioning correctly and reading the information. Therefore, the next logical step would be to check the SATA cable that connects the drive to the motherboard. The cable may be broken or maybe the SATA slot on the motherboard. Switch out the cables and plug it into another slot. If this does not work, then it may be that the HDD is broken. Multiple Beeps can also mean that the RAM or CPU is not plugged in correctly or broken.

Answer:

1. Integrated circuit.

2. Smart card.

3. RFID.

4. Digital ink pen.

5. Electronic Paper Display.

6. Radio transceiver

Explanation:

1. Integrated circuit: a miniature electronic circuit or device that electricity flows through. An integrated circuit (IC) is typically of a semiconductor element such as silicon. Also, it may be referred to as a chip.

2. Smart card: a pocket-sized card that can store data and process information. It's usually used in cable television decoder, transportation terminals, e-commerce services, etc.

3. RFID: an automatic identification device that lets you store and retrieve information. RFID is an acronym for radio frequency identification.

4. Digital ink pen: a device that captures handwritten notes and downloads it to the computer so that the text may be displayed on the monitor.

5. Electronic Paper Display: display or sign with the ability to update the information electronically.

6. Radio transceiver: an electronic device that uses an antenna to read and send information by way of a radio signal in the field of telecommunications.

Answer:

n/2

Explanation:

A linear search starts at the beggining of the array at index 0 and searches for the specific element by analyzing one element at a time. Meaning that if it does not exist in index 0 it moves to index 1 and if its not there it moves to index 2 and so on. If the element is not present in the array it finishes the array and ends, otherwise if it finds the element the search automatically ends. This means that on average the search would end early half of the time. This would mean that on average a total of n/2 elements are visited using a linear search.

Answer:

[tex]a = (b + c)/(2 * c)[/tex]

[tex]z = x/(y + c)[/tex]

[tex]c = (9 * c + 32)/5[/tex]

Explanation:

Required

The expression in basic

To do this, we use () to group items, / as divide and * to combine factors

So, we have:

[tex](a)\ a = \frac{(b + d)}{2c}[/tex]

In basic, it is:

[tex]a = (b + c)/(2 * c)[/tex]

[tex](b)\ z = \frac{x}{y + c}[/tex]

In basic, it is:

[tex]z = x/(y + c)[/tex]

[tex](c)\ c = \frac{9c + 32}{5}[/tex]

[tex]c = (9 * c + 32)/5[/tex]

Answer:

The Data processing concept consists of the collection and handling of data in an appropriate and usable form. Data manipulation is the automated processing in a predetermined operating sequence. Today, the processing is done automatically using computers and results are faster and more accurate.

Explanation:

Answer:

base station is the answer

GIGO is the considered as the accurate processing in computers.

In the field of computer science, the word GIGO stands for " garbage in, garbage out".

It is a concept that refers that if bad input is provided to the computers, the output will also be bad and useless.

It is the inability of the program to any bad data providing incorrect results.

Thus GIGO is the most accurate processing in a computer programs.

Learn more :

https://brainly.in/question/23091232

Answer: Increase your staging folder quota by 20%

Explanation:

The Distributed File System (DFS) allows the grouping of shares on multiple servers. Also, it allows the linking of shares into a single hierarchical namespace.

Since there's a Windows 2016 Server with DFS and during normal operation, an Event 4208 was experienced, the best thing to do in order to address the issue is to increase the staging folder quota by 20%.

Answer:

The most effective temparature used in autoclave is 121°C

Answer:

443

Explanation:

Cyber security can be defined as preventive practice of protecting computers, software programs, electronic devices, networks, servers and data from potential theft, attack, damage, or unauthorized access by using a body of technology, frameworks, processes and network engineers.

In order to be able to perform secure credit card transactions on your system, you should enable HTTPS operating on port 443.

HTTPS is acronym for Hypertext Transfer Protocol Secure while SSL is acronym for Secure Sockets Layer (SSL). It is a standard protocol designed to enable users securely transport web pages over a transmission control protocol and internet protocol (TCP/IP) network.

Hence, the port that needs to be enabled to allow secure transactions is port 443.

Answer:

It seems as though it would be a DDoS attack.

Explanation:

The characteristics are as follows:

A slow down of operations and attempting to get access into said service.

Answer:

Explanation:

Copyright law protects the unauthorized access to, reproduction and distribution of copyrighted material. The permission of the copyright holders is needed if any of these are to be done.

If copyrighted material is used without permission such as using software without buying it, that is illegal. If that software is sold or given to someone else, that is also illegal because it can only be distributed or redistributed by the copyright owners or people they have given access to.

Answer:

La tecnología es el conocimiento y el uso de herramientas, oficios, sistemas o métodos organizativos. La palabra tecnología también se usa como un término para el conocimiento técnico que existe en una sociedad.

La demarcación entre tecnología y ciencia no es del todo fácil de hacer. Muchos programas de ingeniería tienen un gran elemento de ciencias y matemáticas, y muchas universidades técnicas realizan investigaciones exhaustivas en materias puramente científicas. La mayor parte de la ciencia aplicada generalmente se puede incluir en la tecnología. Sin embargo, una diferencia fundamental importante es que la tecnología tiene como objetivo "ser útil" en lugar de, como la ciencia en su forma ideal, comprender el mundo que nos rodea por sí mismo. El hecho de que comprender la realidad que nos rodea (sobre todo en forma de leyes y principios universales) sea muy útil para fines técnicos, explica por qué la ciencia y la tecnología tienen grandes similitudes. Al mismo tiempo, existen áreas de conocimiento e investigación en tecnología e ingeniería donde las propias ciencias naturales puras han hecho contribuciones muy limitadas, como la tecnología de producción, la tecnología de la construcción, la ingeniería de sistemas y la informática. En estas y otras áreas de la tecnología, por otro lado, puede haber depósitos de matemáticas, economía, organización y diseño.

Question options:

State Machine

Flowchart

Sequence

Global Exception Handler

Answer:

Sequence

Explanation:

Uipath is an RPA(Robotic process automation) software that is used by IT professionals and business executives in automating routine or iterative tasks in an organization. Uipath process projects incorporate different workflow types which include :sequence, flowchart, state machine and global exception handler. The sequence workflow type is used for simple linear projects that are not very complex and occupies a single activity block.

Answer:

IP

Explanation:

Answer:

offline backup solution

Explanation:

In such a scenario, the best option would be an offline backup solution. This is basically a local and offline server that holds all of the flight record data that the cloud platform has. This offline backup server would be updated frequently so that the data is always up to date. These servers would be owned by the aviation company and would be a secondary solution for the company in case that the cloud platform fails or the company cannot connect to the cloud service for whatever reason. Being offline allows the company to access the database regardless of internet connectivity.

Answer:

Compactness

Explanation:

Have a nice day!

Answer:

Guided media provide a physical path along which the signals are propagated; these include twisted pair, coaxial cable and optical fiber. Unguided media employ an antenna for transmitting through air, vacuum or water. Traditionally, twisted pair has been the workhorse for communications of all sorts.

Explanation:

douc54.cs.edinboro.edu /~bennett/class/csci475/spring2002/notes/chapter4/index.html

copy and paste that it might help!

Answer:

answer in picture

hope it's helpful

Pascaline, also known as Pascal's calculator or arithmetic machine, was invented by [tex]\sf\purple{Blaise\: Pascal}[/tex] between [tex]\sf\red{1642\: and\: 1644}[/tex].

[tex]\bold{ \green{ \star{ \orange{Mystique35}}}}⋆[/tex]

Answer:

end user

Explanation:

An end user refers to a person using a computer system to perform routine tasks such as listening to music, formatting a document, creating graphic designs, surfing the web, etc., rather than perform systems administration. Thus, an end user is the individual for whom a software application or computer system is created for, especially to perform basic or routine tasks.

For example, a network or system administrator is saddled with the responsibility of implementing changes on an end user's network and network devices in order to get an optimum level of performance.

Answer:

the user cannot use a computer system without hardware and software

Answer:

the user cannot use a computer system without.........hardware.....and...... software

Answer:

The program in Python is as follows:

#1

d = int(input("distance: "))

n = int(input("n: "))

arith_prog = []

for i in range(1,n+1,d):

   arith_prog.append(i)

print(arith_prog)

#2

d = int(input("distance: "))

m = int(input("m: "))

n = int(input("n: "))

arith_prog = []

for i in range(m,n+1,d):

   arith_prog.append(i)

print(arith_prog)

#3

r = int(input("ratio: "))

n = int(input("n: "))

geom_prog = []

m = 1

count = 0

while(m<n):

   m = r**count

   geom_prog.append(m)

   count+=1

print(geom_prog)

Explanation:

#Program 1 begins here

This gets input for distance

d = int(input("distance: "))

This gets input for n

n = int(input("n: "))

This initializes the list, arith_prog

arith_prog = []

This iterates from 1 to n (inclusive) with an increment of d

for i in range(1,n+1,d):

This appends the elements of the progression to the list

   arith_prog.append(i)

This prints the list

print(arith_prog)

#Program 2 begins here

This gets input for distance

d = int(input("distance: "))

This gets input for m

m = int(input("m: "))

This gets input for n

n = int(input("n: "))

This initializes the list, arith_prog

arith_prog = []

This iterates from m to n (inclusive) with an increment of d

for i in range(m,n+1,d):

This appends the elements of the progression to the list

   arith_prog.append(i)

This prints the list

print(arith_prog)

#Program 3 begins here

This gets input for ratio

r = int(input("ratio: "))

This gets input for n

n = int(input("n: "))

This initializes the list, geom_prog

geom_prog = []

This initializes the element of the progression to 1

m = 1

Initialize count to 0

count = 0

This is repeated until the progression element is n

while(m<n):

Generate progression element

   m = r**count

Append element to list

   geom_prog.append(m)

Increase count by 1

   count+=1

This prints the list

print(geom_prog)

Answer:

Microsoft Excel es un programa para calcular y simplificar las tareas de administración de datos que forma parte del paquete Microsoft Office de Microsoft Corporation. Microsoft Excel tiene funciones básicas que se pueden usar para trabajar con hojas de cálculo, usando una cuadrícula que consta de celdas. Las funciones también están disponibles para mostrar gráficos y datos visuales similares.

Answer:

sequence

Explanation:

The logical structure in which one instruction occurs after another with no branching is a sequence.

Answer:

algorithm should:

--Alternate between player 1 and player 2

--Ask the player how many numbers they would like to choose, ensuring that this is between 1 and 3

An algorithm using pseudocode that allows two players to play the game is:

This refers to the use of plain language to describe the sequence of steps for solving a problem.

Hence, we can see that from the given game rules about the input that is made by a player where he starts at 1 and any player that selects 15 loses the game and there is an increment is displayed in a rough form above.

Read more about pseudocodes here:

https://brainly.com/question/24953880

#SPJ2