NEED HELP ASAP
In 1988, three gray whales were trapped in Arctic ice. Television crews captured the frantic
attempts of hundreds of people to save the whales. Eventually, a Soviet icebreaker and U.S.
National Guard helicopters arrived to help free the whales. The cost of the rescue mission
exceeded $5 million.
i. Write a scientific question related to the whale story. (1 point)

Answers

Answer 1
How much was the cost for rescuing each whale?

Related Questions

Select the true statement concerning voltaic and electrolytic cells. Select one: a. Voltaic cells involve oxidation-reduction reactions while electrolytic cells involve decomposition reactions. b. Voltaic cells require applied electrical current while electrolytic cells do not. . c. all electrochemical cells, voltaic and electrolytic, must have spontaneous reactions. d. Electrical current drives nonspontaneous reactions in electrolytic cells.

Answers

Answer:

Electrical current drives nonspontaneous reactions in electrolytic cells.

Explanation:

Electrochemical cells are cells that produce electrical energy from chemical energy.

There are two types of electrochemical cells; voltaic cells and electrolytic cells.

A voltaic cell is an electrochemical cell in which electrical energy is produced from spontaneous chemical process while an electrolytic cell is an electrochemical cell where electrical energy is produced from nonspontaneous chemical processes. Current is needed to drive these nonspontaneous chemical processes in an electrolytic cell.

Answer:

electrolytic cells generate electricity through a non-spontaneous reaction while voltaic cells absorb electricity to drive a spontaneous reaction.

Explanation:

Answer via Educere/ Founder's Education

A chemist fills a reaction vessel with 0.978 g aluminum hydroxide AlOH3 solid, 0.607 M aluminum Al+3 aqueous solution, and 0.396 M hydroxide OH− aqueous solution at a temperature of 25.0°C.
Under these conditions, calculate the reaction free energy ΔG for the following chemical reaction:
Al(OH)3(s) = A1+ (aq) +30H (aq)
Use the thermodynamic information in the ALEKS Data tab. Round your answer to the nearest kilojoule.
KJ

Answers

Answer: [tex]\Delta G^{0}[/tex] = 168.12 kJ

Explanation: Gibbs Free Energy, at any time, is defined as the enthalpy of the system minus product of temperature and entropy of the reaction, i.e.:

[tex]\Delta G^{0} = \Delta H^{0} - T.\Delta S^{0}[/tex]

Enthalpy is defined as internal heat existent in the system. It is calculated as:

[tex]\Delta H^{0} = \Sigma H^{0}_{product} - \Sigma H^{0}_{reagent}[/tex]

Using Enthalpy Formation Table:

[tex]\Delta H^{0} = [3*(-299.9)+(-524.7)] - (-1277)[/tex]

[tex]\Delta H^{0} = 62,6 kJ[/tex]

Entropy is the degree of disorder in the system. It is found by:

[tex]\Delta S^{0} = \Sigma S^{0}_{products} - \Sigma S^{0}_{reagents}[/tex]

Calculating:

[tex]\Delta S^{0} = (-321.7) + 3(-10.8) - 0[/tex]

[tex]\Delta S^{0} = -354.1J[/tex]

And so, Gibbs Free energy will be:

[tex]\Delta G^{0} = \Delta H^{0} - T.\Delta S^{0}[/tex]

[tex]\Delta G^{0} = 62600 - [298.(-354.1)][/tex]

[tex]\Delta G^{0} = 168121.8 J[/tex]

Rounding to the nearest kJ:

[tex]\Delta G^{0}[/tex] = 168.12 kJ

How does the spontaneity of the process below depend on temperature? PCl5(g)+H2O(g)→POCl3(g)+2HCl(g) ΔH=−126 kJ mol−1, ΔS=146 J K−1mol−

Answers

The given question is incomplete, the complete question is:

How does the spontaneity of the process below depend on temperature? PCI5(9)+H2O(g)POCI3(g) +2HCI(g) -126 kJ mol1, AS = 146 J K-'mol1 ΔΗ Select the correct answer below: nonspontaneous at all temperatures spontaneous at all temperatures spontaneous at high temperatures and nonspontaneous at low temperatures spontaneous at low temperatures and nonspontaneous at high temperatures

Answer:

The correct answer is spontaneous at all the temperatures.

Explanation:

Gibbs Free energy is an essential relation that determines the spontaneity of any reaction, that is, ΔG = ΔH - TΔS

When ΔG is less than zero, that is, negative, the reaction is considered to be in spontaneous state. Based on the given information, ΔH = -126 kJ/mol

= -126000 J/mol, it is negative

ΔS = 146 J/K/mol, it is positive

Now, ΔG = ΔH-TΔS

= (-ve) - T (+ve), Thus, when ΔH, is -ve, ΔS is +ve, -TΔS is -ve, the ΔG will be -ve. Therefore, reaction will be spontaneous at all the temperatures.  

The insoluble salts below are put into 0.10 M hydrochloric acid solution. Do you expect their solubility to be more, less, or about the same as in a pure water solution?
1. Zinc sulfide
2. Silver chloride
3. Lead iodide
4. Silver hydroxide

Answers

Answer:

1. Zinc sulfide : about the same solubility, no common ion is found.

2. Silver chloride : less solubility due to the presence of chloride ions provided by the 0.10 M hydrochloric acid.

3. Lead iodide  : about the same solubility, no common ion is found.

4. Silver hydroxide : about the same solubility, no common ion is found.

Explanation:

Hello,

In this case, we first must remember that adding a common ion (which is related with the dissolving solid) decreases the solubility of the insoluble solid due to the fact Le Chatelier's principle states the reaction will shift leftwards (reactants) to reestablish equilibrium, therefore, we have:

1. Zinc sulfide : about the same solubility, no common ion is found.

2. Silver chloride : less solubility due to the presence of chloride ions provided by the 0.10 M hydrochloric acid.

3. Lead iodide  : about the same solubility, no common ion is found.

4. Silver hydroxide : about the same solubility, no common ion is found.

Best regards.

When the nuclide bismuth-210 undergoes alpha decay:
The name of the product nuclide is_____.
The symbol for the product nuclide is_____
Fill in the nuclide symbol for the missing particle in the following nuclear equation.
_____ rightarrow 4He+ 234Th
2 90
Write a balanced nuclear equation for the following:
The nuclide radium-226 undergoes alpha emission.

Answers

Explanation:

An atom undergoes alpha decay by losing a helium atom.

So when bismuth undergoes alpha decay, we have;

²¹⁰₈₃Bi --> ⁴₂He + X

Mass number;

210 = 4 + x

x = 206

Atomic number;

83 = 2 + x

x = 81

The element is Thallium. The symbol is Ti.

For the second part;

X --> ⁴₂He + ²³⁴₉₀Th

Mass number;

x = 4 + 234 = 238

Atomic Number;

x = 2 + 90 = 92

The balanced nuclear equation is;

²³⁸₉₂U --> ⁴₂He + ²³⁴₉₀Th

whts the ph of po4 9.78

Answers

Answer:

4.22

Explanation:

We know from the question, that the pOH of the solution is 9.78. Now the pOH is defined as -log [OH^-].

If the pOH of a solution is given, one may obtain the pH of such solution from the formula;

pH + pOH =14

Hence we can write;

pH = 14-pOH

pH = 14 - 9.78 = 4.22

Hence the pH of the solution is 4.22.

Explain your reasoning. Match each explanation to the appropriate blanks in the sentences on the right.
1. the atomic radius decreases
2. the number of gas molecules decreases
3. molar mass and structure complexity decreases
4. structure complexity decreases
5. molar mass decreases
6. each phase (gas, liquid, solid) becomes more ordered
A (I_2(g), Br_2 (g), Cl_2 (g), F_2 (B): The ranking can best be explained by the trend entropy decreases as______.
B (H_2O_2 (g), H_2S(g), H_2O(g): The ranking can best be explained by the decreases a trend entropy decreases as_______.
C. (C(s, amorphous), C(s, graphite), C(s, diamond): The ranking can best be explained by the trend entropy decreases as_______.

Answers

Answer:

A (I_2(g), Br_2 (g), Cl_2 (g), F_2 (B): The ranking can best be explained by the trend entropy decreases as 5. molar mass decreases.

B (H_2O_2 (g), H_2S(g), H_2O(g): The ranking can best be explained by the decreases a trend entropy decreases as 3. molar mass and structure complexity decreases.

C. (C(s, amorphous), C(s, graphite), C(s, diamond): The ranking can best be explained by the trend entropy decreases as 4. structure complexity decreases.

Explanation:

Hello.

In this case, we can understand a higher entropy when more disorder is present and a lower entropy when less disorder is present, thus:

A (I_2(g), Br_2 (g), Cl_2 (g), F_2 (B): The ranking can best be explained by the trend entropy decreases as 5. molar mass decreases since iodine has the greatest molar mass (254 g/mol) and fluorine the least molar mass (38 g/mol).

B (H_2O_2 (g), H_2S(g), H_2O(g): The ranking can best be explained by the decreases a trend entropy decreases as 3. molar mass and structure complexity decreases since hydrogen peroxide weights 34 g/mol as well as hydrogen sulfide but the peroxide has more bonds (more complex, higher entropy).

C. (C(s, amorphous), C(s, graphite), C(s, diamond): The ranking can best be explained by the trend entropy decreases as 4. structure complexity decreases since diamond has a well-ordered structure and amorphous carbon has a very disordered one.

Best regards.

A mixture of 50ml of 0.1M HCOOH and 50ml of 0.05M NaOH is equivalent to

Answers

Answer:

d) a solution that is 0.025M in HCOOH and 0.025M in HCOONa

Explanation:

The reaction of a weak acid (HOOH) with NaOH is as follows:

HCOOH + NaOH → HCOONa + H₂O

Based on the reaction, 1 mole of the acid reacts with 1 mole of the base (Ratio 1:1).

The initial moles of both species are:

HCOOH: 0.050L × (0.1mol / L) = 0.0050 moles of HCOOH

NaOH: 0.050L × (0.05 mol / L) = 0.0025 moles NaOH

After the reaction, all NaOH reacts with HCOOH producing HCOONa (Because moles of NaOH < moles HCOOH).

Final moles:

HCOOH: 0.0050 moles - 0.0025 moles (After reaction) = 0.0025 moles

HCOONa: Moles HCOONa = Initial Moles NaOH: 0.0025 moles

As volume of the mixture is 100mL (50 from the acid + 50 from NaOH), molarity of both HCOOH and HCOONa is:

0.0025 moles / 0.100L = 0.025M of both HCOOH and HCOONa

Thus, the initial mixture is equivalent to:

d) a solution that is 0.025M in HCOOH and 0.025M in HCOONa

For each bond, show the direction of polarity by selecting the correct partial charges. _________ Si-P _________ _________ Si-Cl _________ _________ Cl-P _________ The most polar bond is _______

Answers

Answer:

Siδ⁺ -- Pδ⁻⁻

Clδ⁻⁻ -- Pδ⁺

Siδ⁺ -- Clδ⁻⁻

Of the mentioned bonds the most polar bond is Si -- Cl

The polarity of the bond primarily relies upon the electronegativity difference between the two atoms that forms the bond. Therefore, if the electronegativity difference between the two atoms that forms the bond is more the bond will be more polar, and if it is less then the bond will be less polar. The electronegativity of the atoms mentioned is Si = 1.8 , P = 2.1 and Cl = 3.00.  

Therefore, the Si - Cl atoms exhibit more electronegativity difference, thus, the Si - Cl bond will be the most polar bond.  

A 1.0 L buffer solution is 0.250 M HC2H3O2 and 0.050 M LiC2H3O2. Which of the following actions will destroy the buffer?

A. adding 0.050 moles of NaOH
B. adding 0.050 moles of LiC2H3O2
C. adding 0.050 moles of HC2H3O2
D. adding 0.050 moles of HCl
E. None of the above will destroy the buffer.

Answers

Answer:

D

Explanation:

Addition of 0.05 M HCl, will react with all of the C2H3O2- from LiAc which will give 0.05 M more HAc. So there will be no Acetate ion left to make the solution buffer. Hence, the correct option for the this question is d, which is adding 0.050 moles of HCl.

The action that destroys the buffer is option c. adding 0.050 moles of HCl.

What is acid buffer?

It is a solution of a weak acid and salt.

Here, The buffer will destroy at the time when either HC2H3O2 or NaC2H3O2 should not be present in the solution.

The addition of equal moles of HCl finishly reacts with equal moles of NaC2H3O2. Due to this,  there will be only acid in the solution.

Since

moles of HC2H3O2 = 1*0.250 = 0.250

moles of NaC2H3O2 = 1*0.050 = 0.050.

moles of HCl is added = 0.050

Now

The reaction between HCl and NaC2H3O2

[tex]HCl + NaC_2H_3O_2 \rightarrow HC_2H_3O_2 + NaCl[/tex]

Now

BCA table is

            NaC2H3O2  HCl       HC2H3O2

Before 0.050 0.050 0.250

Change -0.050 -0.050 +0.050

After 0 0 0.300

Now, the solution contains the acid (HC2H3O2 ) only.

Therefore addition of 0.050 moles of HCl will destroy the buffer.

Learn more about moles here: https://brainly.com/question/24817060

One way the U.S. Environmental Protection Agency (EPA) tests for chloride contaminants in water is by titrating a sample of silver nitrate solution. Any chloride anions in solution will combine with the silver cations to produce bright white silver chloride precipitate. Suppose an EPA chemist tests a sample of groundwater known to be contaminated with nickel(II) chloride, which would react with silver nitrate solution like this:

Answers

Answer:

6.5 mg/L.

Explanation:

Step one: write out and Balance the chemical reaction in the Question above:

NiCl2 + 2AgNO3 =====> 2AgCl + Ni(NO3)2.

Step two: Calculate or determine the number of moles of AgCl.

So, we are given that the mass of AgCl = 3.6 mg = 3.6 × 10^-3 g. Therefore, the number of moles of AgCl can be calculated as below:

Number of moles AgCl = mass/molar mass = 3.6 × 10^-3 g / 143.32. = 2.5118 × 10^-5 moles.

Step three: Calculate or determine the number of moles of NiCl2.

Thus, the number of moles of NiCl2 = 2.5118 × 10^-5/ 2 = 1.2559 × 10^-5 moles.

Step four: detemine the mass of NiCl2.

Therefore, the mass of NiCl2 = number of moles × molar mass = 1.2559 × 10^-5 moles × 129.6 = 1.6 × 10^-3 g.

Step five: finally, determine the concentration of NiCl2.

1000/ 250 × 1.6 × 10^-3 g. = 6.5 mg/L.

Using the standard reduction potentials Ni2+(aq) + 2 e‑Ni(s) ‑0.25 volt Fe3+(aq) + e‑Fe2+(aq) +0.77 volt Calculate the value of E°cell for the cell with the following reaction. Ni2+(aq) + 2 Fe2+(aq) →Ni(s) + 2 Fe3+(aq)

Answers

Answer:

The correct answer is - 1.02 V

Explanation:

From the reduction-oxidation reaction:

Ni²⁺(aq) + 2 Fe²⁺(aq) → Ni(s) + 2 Fe³⁺(aq)

Ni²⁺ is reduced to Ni(s) while Fe²⁺ is oxidized to Fe³⁺. Thus, the half reactions are:

Reduction (cathode) : Ni²⁺(aq) + 2 e‑ → Ni(s)                    Eº= ‑0.25 V

Oxidation (anode) :  2 x (Fe²⁺ → Fe³⁺ + e-)(aq)                Eº= -0.77 V

                                -------------------------------------

                     Ni²⁺(aq) + 2 Fe²⁺(aq) → Ni(s) + 2 Fe³⁺(aq)

In order to calculate the Eºcell, we have to add the reduction potential of the reaction in cathode (reduction) to the oxidation potential of the anode (oxidation):

Eºcell= Eºr + Eºo= (-0.25 V) + (-0.77 V) = - 1.02 V

An atom of 108Te has a mass of 107.929550 amu. Calculate the binding energy per MOLE in kJ. Use the values: mass of 1H atom

Answers

Answer:

The binding energy = 8.64972649×10¹⁰ kJ/mole

Explanation:

Given that:

An atom of 108Te has a mass of 107.929550 amu.

In a 108 Te atom, there are 52 protons and 56 neutrons

where;

mass of proton= 1.007825 amu

mass of neutron= 1.008665 amu

Similarly; The atomic number of Te = 52

the mass of 52 protons = 52 ×  1.007825  amu

the mass of 52 protons = 52.4069 amu

the mass of 56 neutrons = 56 ×  1.008665 amu

the mass of 56 neutrons = 56.48524 amu

The total mass can now be = the mass of 52 protons + the mass of 56 neutrons

The total mass = 52.4069 amu +  56.48524 amu

The total mass = 108.89214  amu

Recall  : it is given that An atom of 108Te has a mass of 107.929550 amu.

Therefore, the mass defect will be = 108.89214  amu - 107.929550 amu

the mass defect = 0.96259amu

where 1 amu = 1.66× 10⁻²⁷ kg

Therefore, 0.96259amu = (0.96259  × 1.66× 10⁻²⁷) kg

= 1.5978994 × 10⁻²⁷kg

The binding energy = mass defect × (speed of light)²

where;

speed of light c = 2.99792 × 10⁸ m/s

The binding energy = 1.5978994 × 10⁻²⁷kg  ×  2.99792 × 10⁸ m/s

The binding energy = 1.43611597 × 10⁻¹⁰  J

The binding energy =  1.43611597 × 10⁻¹³ kJ/atom

since 1 mole = 6.023 × 10²³ atom (avogadro's constant)

Then;

The binding energy = ( 1.43611597 × 10⁻¹³ )× (6.023 × 10²³)  kJ/mole

The binding energy = 8.64972649×10¹⁰ kJ/mole

A piece of solid Fe metal is put into an aqueous solution of Cu(NO3)2. Write the net ionic equation for any single-replacement redox reaction that may be predicted. Assume that the oxidation state of in the resulted solution is 2 . (Use the lowest possible coefficients for the reaction. Use the pull-down boxes to specify states such as (aq) or (s). If a box is not needed, leave it blank. If no reaction occurs, leave all boxes blank and click on Submit.)

Answers

Answer:

Fe(s) + Cu^2+(aq) ---> Fe^2+(aq) + Cu(s)

Explanation:

The ionic equation shows the actual reaction that took place. It excludes the spectator ions. Spectator ions are ions that do not really participate in the reaction even though they are present in the system.

For the reaction between iron and copper II nitrate, the molecular reaction equation is;

Fe(s) + Cu(NO3)2(aq)----> Fe(NO3)2(aq) +Cu(s)

Ionically;

Fe(s) + Cu^2+(aq) ---> Fe^2+(aq) + Cu(s)


Zeros laced at the end of the significant number are...

Answers

Answer:

Zeros located at the end of significant figures are significant.

Explanation:

Hope it will help :)

1500 L has how many significants figures

Answers

Answer:

It has 2

Explanation:

The significant figures are 1 and 5!

Hope this helps:)

Find the density if the volume is 15 mL and the mass is 8.6 g. (5 pts)
Find the volume if the density is 2.6 g/mL and the mass is 9.7 g.(5 pts)
Find the mass if the density is 1.6 g/cm3 and the volume is 4.1 cm3 (5 pts)
Find the density if the initial volume of water is 12.8 mL, the final volume is 24.6 mL and the mass of the object is 4.3 g. Make a drawing to show the water displacement using a graduated cylinder. (gdoc, gdraw)

Answers

Answer:

[tex]\large \boxed{\text{0.57 g/mL; 3.7 mL; 6.6 g; 0.366 g/mL}}[/tex]

Explanation:

1. Density from mass and volume

[tex]\text{Density} = \dfrac{\text{mass}}{\text{volume}}\\\\\rho = \dfrac{m}{V}\\\\\rho = \dfrac{\text{8.6 g}}{\text{15 mL}} = \text{0.57 g/mL}\\\text{The density is $\large \boxed{\textbf{0.57 g/mL}}$}[/tex]

2. Volume from density and mass

[tex]V = \text{9.7 g}\times\dfrac{\text{1 mL}}{\text{2.6 g}} = \text{3.7 mL}\\\\\text{The volume is $\large \boxed{\textbf{3.7 mL}}$}[/tex]

3. Mass from density and volume

[tex]\text{Mass} = \text{4.1 cm}^{3} \times \dfrac{\text{1.6 g}}{\text{1 cm}^{3}} = \textbf{6.6 g}\\\\\text{The mass is $\large \boxed{\textbf{6.6 g}}$}[/tex]

4. Density by displacement

Volume of water + object = 24.6 mL

Volume of water                = 12.8 mL

Volume of object               = 11.8 mL

[tex]\rho = \dfrac{\text{4.3 g}}{\text{11.8 mL}} = \text{0.36 g/mL}\\\text{The density is $\large \boxed{\textbf{0.36 g/mL}}$}[/tex]

Your drawing showing water displacement using a graduated cylinder should resemble the figure below.

 

Chemistry
What is a chemical reaction

Answers

Answer:

A process that involves rearrangement

Explanation:

A chemical reaction is the process that involves rearrangement of the molecular or ironic structure of a substance, as a distinct from a change in physical form or a nuclear reaction.

Answer:

Explanation:

Chemistry

The chemical reaction H2(g) + ½ O2(g) → H2O(l) describes the formation of water from its elements.

The reaction between iron and sulfur to form iron(II) sulfide is another chemical reaction, represented by the chemical equation:

8 Fe + S8 → 8 FeS

While balancing a chemical equation, we change the _____ to balance the number of atoms on each side of the equation.

Answers

Answer:

While balancing a chemical equation, we change the coefficient  to balance the number of atoms on each side of the equation

Explanation:

While balancing a chemical equation, we change the coefficient to balance the number of atoms on each side of the equation.

What is chemical equation?

To summarize in chemistry terms, a chemical equation depicts the initial chemicals, or reactants, on the left-hand side and the final compounds, or products, just on right-hand side, divided by an arrow. In the chemical equation, the number of atoms in each element as well as the total charge are the same on opposite of the equation's sides.

Chemical equations are used in chemistry to depict chemical processes by writing the reactants and products in terms of their corresponding chemical formulas. While balancing a chemical equation, we change the coefficient to balance the number of atoms on each side of the equation.

Therefore, while balancing a chemical equation, we change the coefficient to balance the number of atoms on each side of the equation.

To know more about chemical equation, here:

https://brainly.com/question/29028257

#SPJ6

A chemist prepares a solution of sodium chloride by measuring out 25.4 grams of sodium chloride into a 100. mL volumetric flask and filling the flask to the mark with water. Calculate the concentration in mol/L of the chemist's sodium chloride solution. Be sure your answer has the correct number of significant digits.

Answers

Answer:

The concentration in mol/L =  4.342 mol/L

Explanation:

Given that :

mass of sodium chloride = 25.4 grams

Volume of the volumetric flask = 100 mL

We all know that the molar mass of sodium chloride NaCl = 58.5 g/mol

and number of moles = mass/molar mass

The number of moles of sodium chloride = 25.4 g/58.5 g/mol

The number of moles of sodium chloride = 0.434188 mol

The concentration in mol/L = number of mol/ volume of the solution

The concentration in mol/L = 0.434188 mol/ 100 × 10⁻³ L

The concentration in mol/L =  4.34188 mol/L

The concentration in mol/L =  4.342 mol/L

Find the pH of these buffer solutions using the information provided: 1L solution containing 80g of lactic acid (MW

Answers

Answer:

pH of the solution is 2.0

Explanation:

The lactic acid is a weak acid that is in equilibrium with water as follows:

Lactic acid + H2O ⇄ Lactate + H₃O⁺

And Ka for lactic acid: 1.38x10⁻⁴

Ka = 1.38x10⁻⁴ = [Lactate] [H₃O⁺] / [Lactic acid]

Initial concentration of lactic acid is (MW: 112.06g/mol):

80g * (1mol / 112.06g) / 1L = 0.714M

The equilibrium concentration of the species in the equilibrium are:

[Lactate] = X

[H₃O⁺] = X

[Lactic acid] = 0.714-X

Replacing in Ka expression:

1.38x10⁻⁴ = [X] [X] / [0.714-X]

9.8532x10⁻⁵ -  1.38x10⁻⁴X = X²

9.8532x10⁻⁵ -  1.38x10⁻⁴X - X² = 0

Solving for X:

X = -1.0x10⁻². False solution, there is no negative concentrations

X = 9.86x10⁻³M. Right solution.

As [H₃O⁺] = X

[H₃O⁺] = 9.86x10⁻³M

and pH = -log [H₃O⁺] = -log 9.86x10⁻³M

pH = 2.0

pH of the solution is 2.0

What type of bond would form between two atoms of phosphorus? A. Single covalent bond B. Single ionic bond C. Triple covalent bond D. Double covalent bond

Answers

Answer:

A double bond is formed when two pairs of electrons are shared between the two participating atoms. It is represented by two dashes (=). It is represented by two dashes (=). Double covalent bonds are much stronger than a single bond, but they are less stable

Explanation:

Write a balanced chemical equation for the base hydrolysis of methyl butanoate with NaOH. (Use either molecular formulas or condensed structural formulas, but be consistent in your equation.)

Answers

Explanation:

C5H10O2 + NaOH = C2H5COONa + C2H5OH

your result are : sodium propanoate and ethanol

A balanced chemical equation represents atoms and their numbers with their charge. The balanced equation for base hydrolysis is C₅H₁₀O₂ + NaOH → C₂H₅COONa + C₂H₅OH.

What is hydrolysis?

Base hydrolysis is the splitting of the ester linkage by the basic molecule. As the result the acidic ester portion makes the salt, and also alcohol is produced as the by-product.

The base hydrolysis of methyl butanoate is shown as,

C₅H₁₀O₂ + NaOH → C₂H₅COONa + C₂H₅OH

Here, sodium propanoate and ethanol are produced by the splitting of methyl butanoate in the presence of the base (NaOH).

Therefore, C₅H₁₀O₂ + NaOH → C₂H₅COONa + C₂H₅OH is balanced reaction.

Learn more about hydrolysis here:

https://brainly.com/question/22078321

#SPJ2

Because of movements at the Mid-Atlantic Ridge, the Atlantic Ocean widens by about 2.5 centimeters each year. Explain which type of plate boundary causes this motion.

Answers

Answer:

A divergent plate boundary  

Explanation:

At a divergent boundary, the plates pull away from each other and generate new crust.

 

Answer:

Because the ocean becomes larger, this is a divergent plate boundary. Divergent plates cause the ocean floor to expand, making the ocean larger.

Explanation:

PLATO ANSWER

If the theoretical yield of a reaction is 332.5 g and the percent yield for the reaction is 38 percent, what's the actual yield of product in grams? \

A. 8.74 g
B. 12616 g
C. 116.3 g
D. 126.4 g

Answers

Answer: D - 126.4g

Explanation:  

% Yield = Actual Yield/Theoretical Yield

38% = Actual Yield/332.5

38/100 = Actual Yield/332.5

(.38)(332.5) = 126.35 g = 126.4 g Actual Yield

Answer:

is D. the correct answer

Explanation:

I'm not sure if it is. Please let me know if I'm mistaking.

g Does a reaction occur when aqueous solutions of barium hydroxide and aluminum sulfate are combined

Answers

Answer:

3BaO + Al₂(SO₄)₃  →  Al₂O₃+ 3BaSO₄

Explanation:

Yes! A reactiin occurs between barium hydroxide and auminium sulphate.

barium sulfate (BaSO4) and aluminum hydroxide (Al(OH)3) are the products obtained in this reaction.

The reaction is given by the equation below;

3BaO + Al₂(SO₄)₃  →  Al₂O₃+ 3BaSO₄

The new hybrid car can get 51.5 km/gal. It has a top speed of 40000.00 cm/min and is 4m long. How fast can the car go in m/hr?


Answers

Answer:

The anawer of this question is 0.024 m/h

Explanation:

Other explanations of the question are additional.

243
Am
95
1. The atomic symbol of americium-243 is shown. Which of the following is correct?
• A. The atomic mass is 243 amu, and the atomic number is 95.
B. The atomic mass is 338 amu, and the atomic number is 95.
• C. The atomic mass is 95 amu, and the atomic number is 243.
D. The atomic mass is 243 amu, and the atomic number is 338.​

Answers

Answer:

A. The atomic mass is 243 amu, and the atomic number is 95.

Calculate the concentration of H3O+ in a solution that contains 5.5 × 10-5 M OH- at 25°C. Identify the solution as acidic, basic, or neutral.

Answers

Explanation:

To calculate [H3O+] in the solution we must first find the pH from the [ OH-]

That's

pH + pOH = 14

pH = 14 - pOH

To calculate the pOH we use the formula

pOH = - log [OH-]

And [OH-] = 5.5 × 10^-5 M

So we have

pOH = - log 5.5 × 10^ - 5

pOH = 4.26

Since we've found the pOH we can now find the pH

That's

pH = 14 - 4.26

pH = 9.74

Now we can find the concentration of H3O+ in the solution using the formula

pH = - log H3O+

9.74 = - log H3O+

Find the antilog of both sides

H3O+ = 1.8 × 10^ - 10 M

The solution is basic since it's pH lies in the basic region.

Hope this helps you

Determine the oxidation state for each of the elements below. The oxidation state of ... silver ... in ... silver oxide Ag2O ... is ... ___ . The oxidation state of sulfur in sulfur dioxide SO2 is ___ . The oxidation state of iron in iron(

Answers

Answer:

The oxidation state of silver in [tex]\rm Ag_2O[/tex] is [tex]+1[/tex].

The oxidation state of sulfur in [tex]\rm SO_2[/tex] is [tex]+4[/tex].

Explanation:

The oxidation states of atoms in a compound should add up to zero.

Ag₂O

There are two silver [tex]\rm Ag[/tex] atoms and one oxygen [tex]\rm O[/tex] atom in one formula unit of [tex]\rm Ag_2O[/tex]. Therefore:

[tex]\begin{aligned}&\rm 2 \times \text{Oxidation state of $\rm Ag$}+ \rm 1 \times \text{Oxidation state of $\rm O$} = 0\end{aligned}[/tex].

The oxidation state of oxygen in most compounds (with the exception of peroxides and fluorides) is [tex]-2[/tex]. Silver oxide [tex]\rm Ag_2O[/tex] isn't an exception. Therefore:

[tex]\begin{aligned}&\rm 2 \times \text{Oxidation state of $\rm Ag$}+ \rm 1 \times \text{Oxidation state of $\rm O$} = 0\\ &\rm 2 \times \text{Oxidation state of $\rm Ag$}+ \rm 1 \times (-2) = 0\end{aligned}[/tex].

Solve this equation for the (average) oxidation state of [tex]\rm Ag[/tex]:

[tex]\text{Oxidation state of $\rm Ag$} = 1[/tex].

SO₂

Similarly, because there are one sulfur [tex]\rm S[/tex] atom and two oxygen [tex]\rm O[/tex] atoms in each [tex]\rm SO_2[/tex] molecules:

[tex]\begin{aligned}&\rm 1\times \text{Oxidation state of $\rm S$}+ \rm 2 \times \text{Oxidation state of $\rm O$} = 0\end{aligned}[/tex].

The oxidation state of [tex]\rm O[/tex] in [tex]\rm SO_2[/tex] is also [tex]-2[/tex], not an exception, either.

Therefore:

[tex]\begin{aligned}&\rm 1 \times \text{Oxidation state of $\rm S$}+ \rm 2 \times \text{Oxidation state of $\rm O$} = 0\\ &\rm 1 \times \text{Oxidation state of $\rm S$}+ \rm 2 \times (-2) = 0\end{aligned}[/tex].

Solve this equation for the oxidation state of [tex]\rm S[/tex] here:

[tex]\text{Oxidation state of $\rm S$} = 4[/tex].

Other Questions
which article is related to Equality before law The world on the turtles back Answer the following questions properly (complete sentences and direct citations/quotations where necessary) what is one universal question humans have about the world, and how does this story answer this question? help me plz I really need this thanks I will give a lot of points when was the declaration of Independence signed multiple choice a. 126 pie cm^3b. 84 pie cm^3c. 504 pie cm*3 15. Calculate the critical angle of glass and water combination. Show your calculation. 16. What is the critical angle for the interface between Mystery A and glass Astronomers were at first surprised to find complicated molecules in the interstellar medium. They thought ultra-violet light from stars would break apart such molecules. What protects the molecules we observe from being broken apart Armando is baking 36 batches of brownies for the bake sale. Each batch of brownies takes cups of flour. What is a reasonable estimate of the amount of flour that he will need to bake all thirty-six batches of brownies? Gothic Cathedrals were mostly builtnear the manors of dukes and lordsin the countryside to minister to the illiterate populationat the heart of medieval townson university campuses Develop a CPP program to test is an array conforms heap ordered binary tree. This program read data from cin (console) and gives an error if the last item entered violates the heap condition. Use will enter at most 7 numbers. Example runs and comments (after // ) are below. Your program does not print any comments. An output similar to Exp-3 and Exp-4 is expected.Exp-1:Enter a number: 65 Enter a number: 56 // this is first item (root,[1]) in the heap three. it does not violate any other item. So, no // this is third [3] number, should be less than or equal to its root ([1]) Enter a number: 45 // this is fourth number, should be less than or equal to its root ([2]) Enter a number: 61 // this is fifth number, should be less than or equal to its root ([2]). It is not, 61 > 55. The 61 violated the heap. Exp-2: Enter a number: 100 Enter a number: 95 1/ 95 < 100, OK Enter a number: 76 // 76 < 100, OK Enter a number: 58 // 58 < 95, OK Enter a number: 66 1/ 66 < 95, OK Enter a number: 58 // 58 < 76, OK Enter a number: 66 // 66 < 76, OK Exp-3: Enter a number: -15 Enter a number: -5 -5 violated the heap. Exp-4: Enter a number: 45 Enter a number: 0 Enter a number: 55 55 violated the heap. In the given figure if p||q what is the value of b? speech is to communication as democracy is to La madre de rosita se ha comprado una mascarilla por un valor de 1 25 dolares al mismo tiempo se ha comprado un paquete de jabones de 2 00 dolares y luego compra un gel de alcohol en 3 00 dolares despus de pagar le queda 7 65 dolares que debemos saber que tengo que hacer para obtener el resultaron Solve 5(2x + 4) = 15. Round to the nearest thousandth. Five more than the square of a number Five more than twice a number Five less than the product of 3 and a number Five less the product of 3 and a number Twice the sum of a number and 5 The sum of twice a number and 5 The product of the cube of a number and 5 The cube of the product of 5 and a number. 5 + x2 5 + 2x 5 - 3x 3x - 5 2x + 5 2(x + 5) 5x3 (5x)3 WILL MARK BRAINLIEST AND DON'T PUT A FAKE ANSWER TO GET POINTS EITHER CUS I NEED HELP An investment adviser representative's friend provides him with a list of 10 prospective clients. The representative agrees to pay his friend a referral fee for each person on the list that opens an account with the adviser. Which statement is TRUE what is (7*7*7*7*7*7) * (7*7) in exponential form? If tall is dominant over short, and yellow seed is dominant over green, how would you write the genotype of a pea plant that is heterozygous for tall, and that produces yellow seeds How to do this question plz answer me step by step plzz plz Which of the following provides a characteristic ofMgO(s) with a correct explanation?Choose 1 answer:It is hard because its ions are held together by strongelectrostatic attractions.BIt is malleable because its atoms can easily move pastone another without disrupting the bonding.It is a poor conductor of electricity because itselectrons are tightly held within covalent bonds andlone pairs.It has a high melting point because its moleculesinteract through strong intermolecular forces.