Mr. and Mrs. Davenport have 3 kids, ages 3, 6, and 13. Their financial matters for 2019 are as follows:Adjusted Gross Income: $65,000Un-reimbursed Medical Expenses: $5,250How much would the Davenports' medical expenses contribute to their total itemized deductions?

The cost of producing an additional 200 items due to increased demand is 180,000 Botswana Pula.

Marginal cost is the additional cost incurred by producing one additional unit of a good or service. In other words, it is the cost of producing one more unit of output.

The marginal cost (MC) equation given is MC = 2x - 100, where x is the number of units produced.

To find the cost of producing an additional 200 items due to increased demand, we need to calculate the marginal cost of producing these 200 items and then multiply that by 200.

The marginal cost of producing 200 additional items is given by:

MC(200) = 2(300 + 200) - 100

MC(200) = 2(500) - 100

MC(200) = 900

So the marginal cost of producing 200 additional items is 900. To find the total cost of producing these 200 items, we can simply multiply the marginal cost by the number of units produced, which in this case is 200:

Total cost = MC(200) × 200

Total cost = 900 × 200

Total cost = 180,000

Therefore, the cost of producing an additional 200 items due to increased demand is 180,000 Botswana Pula.

To know more about marginal cost visit:

https://brainly.com/question/1264758

#SPJ1

The probability that, out of 18 independent samples received from one river, just two were contaminated is 0.8438.

In the following 18 samples to be evaluated,

Let X = the number of samples that now the pollutant is present in.

Thus, with p = 0.10 and n = 18, X is a binomial random variable.

Using the binomial theorem:

[tex](^{n} _{r} ) p^{x} q^{n-x}[/tex]

p = 0.10

q = 1 - 0.10 = 0.9

n = 18

The likelihood that only two samples out of 18 obtained in different ways from the same river were polluted

P(x = 2) = [tex](^{18} _{2} ) (0.1)^{2} (0.9)^{18-2}[/tex]

=  [tex](^{18} _{2} ) (0.1)^{2} (0.9)^{16}[/tex]

= 153 x 0.01 x 0.1853

= 0.8438

Thus, the probability that, out of 18 separate samples received from one river, just two were contaminated is 0.8438.

Know more about the independent samples

https://brainly.com/question/12184795

#SPJ1

Answer: 13,708 ft

Step-by-step explanation:

To find the difference in elevation between the mountain and the valley, we need to subtract the elevation of the valley from the elevation of the mountain:

13,318 ft (mountain) - (-390 ft) (valley) = 13,318 ft + 390 ft = 13,708 ft

Therefore, the difference in elevation between the mountain and the valley is 13,708 ft.

Answer: The difference is 13,708 ft.

Given that a mountain is 13,318 feet above sea level. So the elevation of the mountain is [tex]= +13,318 \ \text{ft}[/tex].

Given that a valley is 390 feet below sea level.

So the elevation of the valley is [tex]= -390 \ \text{ft}[/tex].

So the difference between them is [tex]= 13,318 - (-390) = 13,318 + 390 = 13,708 \ \text{ft}.[/tex]

Learn more: https://brainly.com/question/20521181

i) Find the mean, median, and mode of the frequency table as follows:

ii) The average that justifies the teacher's statement congratulating the class that 'over three quarters were above average' is the average mark of 10, which is 5.

The mean refers to the average or the quotient of the total values divided by the number of items.

The median is the middle value in the data, which occurs with marks 8 for the 13th and 14th students.

The mode is the value that occurs most frequently, which is 3 which occurs 6 times.

Frequency Table:

Mark   Frequency  Cumulative Frequency

3              6                            18 (0 + 3 x 6)

4              3                            30 (18 + 4 x 3)

5              1                            35 (30 + 5 x 1)

6              2                           47 (35 + 6 x 2)

7              0                           47 (47 + 7 x 0)

8              5                           87 (47 + 8 x 5)

9              5                         132 (87 + 9 x 5)

10            4                         172 (132 + 10 x 4)

Mean = 6.6 (172/26)

Median = 8

Mode = 3

Learn more about the mean, median, and mode at https://brainly.com/question/452652.

#SPJ1

The average rate of change on the intervals [0, 3], [3, 5], [5, 7], and [7, 9] are 2, -1.5, 1, and -1.5, respectively.

It expresses how much the function changed per unit on average during that time period. It is computed by taking the slope of the straight line connecting the interval's endpoints on the function's graph.

To calculate the average rate of change for the intervals shown in the graph, we must first determine the slope of the line connecting the endpoints of each interval.

0-3 interval:

Because the interval's endpoints are (0, 1) and (3, 7), the slope of the line connecting them is:

slope = (y change) / (x change) = (7 - 1) / (3 - 0) = 2

pauses [3, 5]:

Because the interval's endpoints are (3, 7) and (5, 4), the slope of the line connecting them is:

slope = (y change) / (x change) = (4 - 7) / (5 - 3) = -1.5

[5–7] Interval:

Because the interval's endpoints are (5, 4) and (7, 6), the slope of the line connecting them is:

slope = (y change) / (x change) = (6 - 4) / (7 - 5) = 1

Interval 7 and 9:

Because the interval's endpoints are (7, 6) and (9, 3), the slope of the line connecting them is:

slope = (y change) / (x change) = (3 - 6) / (9 - 7) = -1.5

As a result, the average rate of change on the intervals [0, 3], [3, 5], [5, 7], and [7, 9] is 2, -1.5, 1, and -1.5.

To know more about Average Rate visit:

https://brainly.com/question/23715190

#SPJ1

Answer:

2

Step-by-step explanation:

since d=7 and the equation is d-5 in the place of d we'll put 7 therefore 7-5=2

The calculated value of the indicated missing length x in the right triangle is 12

Given the right triangle

We can start by calculating the value of x using the following equivalent ratio

x : 9 = 25 - 9 : x

Evaluate the difference

This gives

x : 9 = 16 : x

Next, we express the equivalent ratio as a fraction

So, the ratio becomes

x/9 = 16/x

Cross multiply the equation to calculate x

So, we have the following

x * x = 9 * 16

Evaluate the product

x² = 144

Take the square root of both sides

So, we have the solution to be

y = 12

Hence, the value of x is 12

Read more about right triangles at

https://brainly.com/question/2437195

#SPJ1

Answer:

Step-by-step explanation:

This is an example of a hypergeometric distribution problem, where we have a population of 10,000 clock radios with 500 defective ones, and we want to calculate the probability of getting at least one defective radio in a random sample of 10 without replacement.

The probability of getting no defective radios in the sample is:

(9500/10000) * (9499/9999) * (9498/9998) * ... * (9491/9992)

This is because, for the first radio, there are 9500 good radios out of 10,000, and for the second radio, there are 9499 good radios out of 9,999, and so on.

The probability of getting at least one defective radio in the sample is then:

1 - (9500/10000) * (9499/9999) * (9498/9998) * ... * (9491/9992)

which is approximately equal to 0.401.

Therefore, the probability that the entire batch will be rejected is 0.401.

In respοnse tο the questiοn, we may say that As a result, FHJ stοck has equatiοn highest cοefficient οf variatiοn, with a value οf arοund 4.33%.

In mathematics, an equatiοn is a statement that expresses the equality οf twο expressiοns. Equatiοn is made up οf twο sides that are jοined by the algebraic symbοl (=). Fοr example, in this argument, it is asserted that "2x + 3 = 9" denοtes that "2x plus 3" equals the number "9".

Equatiοn sοlving is the prοcess οf determining the value(s) οf the variable(s) required fοr the equatiοn tο be true. There are many different kinds οf equatiοns, such as regular and nοnlinear οnes with οne οr mοre elements. This fοrmula raises the variable x tο the secοnd pοwer: "x² + 2x - 3 = 0." Lines are used in the study οf mathematics in the fields οf algebra, calculus, and geοmetry.

The cοefficient οf variatiοn (CV) represents the standard deviatiοn as a percentage οf the mean and is a relative measure οf variability. It is cοmputed as fοllοws:

CV = (standard deviatiοn / mean) multiplied by 100%

Tο determine which οf the three stοcks has the highest cοefficient οf variatiοn, we must cοmpute the CV fοr each and cοmpare the results.

Fοr ACE inventοry:

CV = (1.5 / 37.03) x 100% ≈ 4.05%

In the case οf FHJ stοck:

CV = (2.62 / 60.55) x 100% ≈ 4.33%

In the case οf LMP stοck:

CV = (3.06 / 124.9) x 100% ≈ 2.45%

As a result, FHJ stοck has the highest cοefficient οf variatiοn, with a value οf arοund 4.33%.

To know more about equation visit:

brainly.com/question/649785

#SPJ1

Answer:

it should be true because sum of 3 interior angle of a triangle is 180 degree

Answer:

True.

Step-by-step explanation:

A triangle's angles add up to 180 degrees because one exterior angle is equal to the sum of the other two angles in the triangle. In other words, the other two angles in the triangle (the ones that add up to form the exterior angle) must combine with the third angle to make a 180 angle.

The graph of the linear function 4x + 6y = -12 is given by the image presented at the end of the answer.

The slope-intercept representation of a linear function is given by the equation presented as follows:

y = mx + b

The coefficients of the function and their meaning are described as follows:

The function for this problem is given as follows:

4x + 6y = -12.

In slope-intercept form, the function is given as follows:

6y = -4x - 12.

y = -2x/3 - 2.

The slope and the intercept are given as follows:

More can be learned about linear functions at https://brainly.com/question/24808124

#SPJ1

Answer: 56

Step-by-step explanation:

One possible method to estimate the population of snapping turtles in the area is by using the mark and recapture method, also known as the Lincoln-Petersen index.

According to this method, the population size can be estimated by dividing the number of marked individuals in the second sample by the proportion of marked individuals in the combined sample. In other words:

Estimated population size = (Number of individuals in sample 1 × Number of individuals in sample 2) / Number of marked individuals in sample 2

Using the information provided in the problem, we can fill in the formula as follows:

Estimated population size = (15 × 15) / 4

Estimated population size = 56.25

Rounding to the nearest whole number, we get an estimated population size of 56 snapping turtles in the area.

Answer:

the two numbers are 15 and 35, and their ratio is 3:7, and their difference is 20.

Step-by-step explanation:

Uri paid a total of $85.47 for the landscaping service including tax and tip.

Taxes are compulsory payments made by a government organisation, whether local, regional, or federal, to people or businesses. Tax revenues are used to fund a variety of government initiatives, such as Social Security and Medicare as well as public infrastructure and services like roads and schools. Taxes are borne by whoever bears the cost of the tax in economics, whether this is the entity being taxed, such as a business, or the final users of the items produced by the firm. Taxes should be taken into consideration from an accounting standpoint, including payroll taxes, federal and state income taxes, and sales taxes.

Given that company charged $74 for the service plus 5% tax.

The tax is 5%, that is:

Tax = 5% of $74 = 0.05 x $74 = $3.70

Cost after tax = $74 + $3.70 = $77.70

Now, tip is 10%:

Tip = 10% of $77.70 = 0.10 x $77.70 = $7.77

Total cost = $77.70 + $7.77 = $85.47

Hence, Uri paid a total of $85.47 for the landscaping service including tax and tip.

Learn more about tax here:

https://brainly.com/question/16423331

#SPJ1

If the slope of the graph is increasing from positive x-axis to negative x-axis, then the function is not that decreasing. Therefore, Jonathan's statement is incorrect.

The function is decreasing on intervals where the slope is negative. In this case, since the slope is increasing from positive x-axis to negative x-axis, the function is decreasing on the interval where x is negative.

To determine this interval more precisely, we would need to find the x-value(s) where the slope changes sign from positive to negative. These x-values correspond to critical points, such as local maximums or minimums. The function is decreasing before a local maximum and after a local minimum.

Therefore, Jonathan's statement is not correct, and the function represented by the graph is decreasing on the interval where x is negative.

Learn more about graph function from

https://brainly.com/question/24335034

brainly.com/question/26676087

#SPJ1

Answer:

The value of the derivative at (-2/3, 2√3/3) is zero.

Step-by-step explanation:

Given function:

[tex]f(x)=-3x\sqrt{x+1}[/tex]

To differentiate the given function, use the product rule and the chain rule of differentiation.

[tex]\boxed{\begin{minipage}{5.4 cm}\underline{Product Rule of Differentiation}\\\\If $y=uv$ then:\\\\$\dfrac{\text{d}y}{\text{d}x}=u\dfrac{\text{d}v}{\text{d}x}+v\dfrac{\text{d}u}{\text{d}x}$\\\end{minipage}}[/tex]

[tex]\boxed{\begin{minipage}{7 cm}\underline{Differentiating $[f(x)]^n$}\\\\If $y=[f(x)]^n$, then $\dfrac{\text{d}y}{\text{d}x}=n[f(x)]^{n-1} f'(x)$\\\end{minipage}}[/tex]

[tex]\begin{aligned}\textsf{Let}\;u &= -3x& \implies \dfrac{\text{d}u}{\text{d}{x}} &= -3\\\\\textsf{Let}\;v &= \sqrt{x+1}& \implies \dfrac{\text{d}v}{\text{d}{x}} &=\dfrac{1}{2} \cdot (x+1)^{-\frac{1}{2}}\cdot 1=\dfrac{1}{2\sqrt{x+1}}\end{aligned}[/tex]

Apply the product rule:

[tex]\implies f'(x) =u\dfrac{\text{d}v}{\text{d}x}+v\dfrac{\text{d}u}{\text{d}x}[/tex]

[tex]\implies f'(x)=-3x \cdot \dfrac{1}{2\sqrt{x+1}}+\sqrt{x+1}\cdot -3[/tex]

[tex]\implies f'(x)=- \dfrac{3x}{2\sqrt{x+1}}-3\sqrt{x+1}[/tex]

Simplify:

[tex]\implies f'(x)=- \dfrac{3x}{2\sqrt{x+1}}-\dfrac{3\sqrt{x+1} \cdot 2\sqrt{x+1}}{2\sqrt{x+1}}[/tex]

[tex]\implies f'(x)=- \dfrac{3x}{2\sqrt{x+1}}-\dfrac{6(x+1)}{2\sqrt{x+1}}[/tex]

[tex]\implies f'(x)=- \dfrac{3x+6(x+1)}{2\sqrt{x+1}}[/tex]

[tex]\implies f'(x)=- \dfrac{9x+6}{2\sqrt{x+1}}[/tex]

An extremum is a point where a function has a maximum or minimum value.

From inspection of the given graph, the maximum point of the function is (-2/3, 2√3/3).

To determine the value of the derivative at the maximum point, substitute x = -2/3 into the differentiated function.

[tex]\begin{aligned}\implies f'\left(-\dfrac{2}{3}\right)&=- \dfrac{9\left(-\dfrac{2}{3}\right)+6}{2\sqrt{\left(-\dfrac{2}{3}\right)+1}}\\\\&=-\dfrac{0}{2\sqrt{\dfrac{1}{3}}}\\\\&=0 \end{aligned}[/tex]

Therefore, the value of the derivative at (-2/3, 2√3/3) is zero.

The surface area of the surface generated by rotating the curve y = x² about the y-axis, and we found that the surface area is approximately 54.33 square units.

In this case, the curve we want to rotate is y = x², and we want to rotate it about the y-axis. To use the formula above, we need to express the equation of the curve in terms of x. Therefore, we need to rewrite y = x² as x = √y.

Next, we need to find the derivative of x = √y with respect to y, which is:

dx/dy = 1/2√y

Substituting this into the formula for the surface area, we get:

Surface Area = 2π ∫[0,4] √y √(1+(1/2√y)²) dy

Simplifying the expression inside the square root, we get:

Surface Area = 2π ∫[0,4] √(y+(1/4)) dy

We can evaluate this integral using the power rule of integration, which gives:

Surface Area = 2π [2/3(y+(1/4))^(3/2)]₀⁴

Simplifying further, we get:

Surface Area = 2π [2/3(17/4)^(3/2)]

Surface Area ≈ 54.33 square units

Therefore, the surface area of the surface generated by rotating the curve y = x² about the y-axis is approximately 54.33 square units.

To know more about surface area here

https://brainly.com/question/27784309

#SPJ4

Complete Question:

How do you find the area of the surface generated by rotating the curve about the y-axis y = x^2 , 0 ≤ x ≤ 2 ?

1. The total yards of each fabric that Karina will buy to make a quilt is as follows:

a) Green Fabric = 12 square yards

b) Burgundy Fabric = 19 square yards

2. The total yards of fabric she will buy is 31 square yards.

The total yards of fabric can be determined by unit conversion using division operation.

Given that 36 inches = 1 yard, the square inches of fabric are converted to square yards by dividing the total by 36.

The total number of green fabric Karina requires = 420 square inches

= 12 square yards (420/36)

The total number of burgundy fabric Karina requires = 688 square inches

= 19 square yards (688/36)

The total number of fabric (green and burgundy) = 1,108 square inches (420 + 688)

36 inches = 1 yard

1,108 inches = 30.78 square yards (1,108/36)

= 31 square yards or (12 + 19)

Learn more about unit conversions at https://brainly.com/question/174910.

#SPJ1

Answer:

x = 17

Step-by-step explanation:

Subtract 6x from both sides:

2x - 18 = 16

Add 18 on both sides to isolate the variable:

2x = 18 + 16

2x = 34

Divide by 2: x = 17

The area of the region that is bounded by the given curve and lies in the specified sector is A = 2(e^(7π/12) - e^(π/12))

The polar curve r = e^(θ/2) represents a spiral that starts from the origin and gets farther away as it unwinds. We want to find the area of the region that lies inside this spiral and inside the sector defined by the angles θ = π/6 and θ = 7π/6.

To solve the problem, we need to find the points where the curve intersects the sector, which are given by plugging in the values of θ:

r(π/6) = e^(π/12)

r(7π/6) = e^(7π/12)

Then we can set up the integral for the area inside the sector:

A = 1/2 ∫[π/6, 7π/6] (r(θ))^2 dθ

Substituting the equation for r:

A = 1/2 ∫[π/6, 7π/6] e^θ/2 dθ

Using the power rule for integration:

A = 2(e^(7π/12) - e^(π/12))

This is the exact value of the area inside the sector and inside the spiral. If we want a decimal approximation, we can use a calculator or computer software to evaluate it.

To know more about Area:

https://brainly.com/question/4036565

#SPJ4

The value of h(x) using exponents are as follows:

For -1, the value of h(x)=1/10

For 0, the value of h(x) = 1

For 1, the value of h(x) = 10

For 2, the value of h(x) = 100

For 3, the value of h(x) = 1000

The exponent of a number tells us how many times the original value has been multiplied by itself. For instance, 2×2×2×2 can be expressed as [tex]2^{4}[/tex] the result of 4 times multiplying 2 by itself. Thus, 4 is referred to as the "exponent" or "power," while 2 is referred to as the "base."

Generally speaking, [tex]x^{n}[/tex] denotes that x has been multiplied by itself n times. Here x is the base and n is the power.

Now here, as we put the value of x in the equation, h(x) we can get the value of h(x) for each value of x.

So,

For -1, the value of h(x)=1/10

For 0, the value of h(x) = 1

For 1, the value of h(x) = 10

For 2, the value of h(x) = 100

For 3, the value of h(x) = 1000

To know more about exponents, visit:

https://brainly.com/question/30066987

#SPJ1

Answer:

According to the scale, 1 inch on the drawing represents 1.5 feet in real life. So, to find the actual length of the door, we need to multiply the length on the drawing by the scale factor:

4 inches x 1.5 feet/inch = 6 feet

Similarly, to find the actual width of the door, we need to multiply the width on the drawing by the scale factor:

7 inches x 1.5 feet/inch = 10.5 feet

Therefore, the actual measurements of the door are 6 feet by 10.5 feet.

[tex]\begin{cases} x=\frac{2+i\sqrt{2}}{3}\implies 3x=2+i\sqrt{2}\implies 3x-2-i\sqrt{2}=0\\\\ x=\frac{2-i\sqrt{2}}{3}\implies 3x=2-i\sqrt{2}\implies 3x-2+i\sqrt{2}=0 \end{cases} \\\\\\ \stackrel{ \textit{original polynomial} }{a(3x-2-i\sqrt{2})(3x-2+i\sqrt{2})=\stackrel{ 0 }{y}} \\\\[-0.35em] ~\dotfill[/tex]

[tex]\stackrel{ \textit{difference of squares} }{[(3x-2)-(i\sqrt{2})][(3x-2)+(i\sqrt{2})]}\implies (3x-2)^2-(i\sqrt{2})^2 \\\\\\ (9x^2-12x+4)-(2i^2)\implies 9x^2-12x+4-(2(-1)) \\\\\\ 9x^2-12x+4+2\implies 9x^2-12x+6 \\\\[-0.35em] ~\dotfill\\\\ a(9x^2-12x+6)=y\hspace{5em}\stackrel{\textit{now let's make}}{a=-\frac{1}{9}} \\\\\\ -\cfrac{1}{9}(9x^2-12x+6)=y\implies \boxed{-x^2+\cfrac{4}{3}x-\cfrac{2}{3}=y}[/tex]

The code segment that assigns bonus correctly for all possible integer values of score is D, which uses nested if statements to implement the game's rules for assigning a value to bonus based on the value of score.

The code segment that assigns bonus correctly for all possible integer values of score is D:

IF(score < 50)

{

   bonus ← Ø

}

ELSE

{

   IF (score > 100)

   {

       bonus ← score (10)

   }

   ELSE

   {

       bonus ← score

   }

}

This code segment correctly implements the rules for assigning a value to bonus based on the value of score. It first checks if score is less than 50, and if so, it assigns 0 to bonus. If score is greater than or equal to 50, it checks if score is greater than 100, and if so, it assigns 10 times score to bonus. Otherwise, it assigns score to bonus. This covers all possible integer values of score and ensures that bonus is assigned correctly according to the game's rules.

Learn more about integer here: brainly.com/question/15276410

#SPJ4

Complete question is in the image attached below

Answer:

Se depositan $ 8.000 en un banco que reconoce una tasa de interés del 36% anual, capitalizable mensualmente. ¿Cuál será el monto acumulado en cuatro años?

Step-by-step explanation:

Para resolver este problema, podemos utilizar la fórmula del interés compuesto:

A = P*(1 + r/n)^(n*t)

Donde:

A: el monto acumulado después de t años

P: el capital inicial

r: la tasa de interés anual

n: el número de veces que se capitaliza el interés por año

t: el tiempo en años

En este caso, tenemos:

P = $8.000

r = 36% = 0.36

n = 12 (ya que la tasa de interés se capitaliza mensualmente)

t = 4 años

Sustituyendo estos valores en la fórmula, obtenemos:

A = $8.000*(1 + 0.36/12)^(124)

A = $8.000(1 + 0.03)^48

A = $8.000*(1.03)^48

A = $16.751,83

Por lo tanto, el monto acumulado en cuatro años será de $16.751,83.

Answer: f(-1/2) = 16/3

Step-by-step explanation:

Substituting -1/2 for x in the given function:

f(-1/2) = (-2/3)(-1/2) + 5

f(-1/2) = 1/3 + 5

f(-1/2) = 16/3

Therefore, f(-1/2) = 16/3.

The given statement "Star clusters with lots of bright, blue stars of spectral type O and B are generally younger than clusters that don't have any such stars." is True. The reason for this is that O and B stars are short-lived and burn through their fuel quickly.

The reason for this is that O and B stars burn through their fuel quickly, causing them to exhaust their nuclear fuel and end their lives in a relatively short period, typically within a few tens of millions of years.

On the other hand, stars of lower mass and cooler temperatures, like G and K type stars like our sun, have longer lifetimes and take billions of years to exhaust their nuclear fuel.

Therefore, clusters without any bright, blue stars are likely to have evolved for longer periods, allowing these short-lived stars to have already expired.

To know more about Star clusters:

https://brainly.com/question/30899528

#SPJ4

Step 1: Arrange the arrays so that A and B are in the same order: A = [ 1 2 4 0 5 6 ], B = [ 7 3 2 5 1 9]

Step 2: To find C = A+B, add each element of A and B together.

C = [1+7, 2+3, 4+2, 0+5, 5+1, 6+9]

C = [8, 5, 6, 5, 6, 15]

Step 3: To find D = A-B, subtract each element of B from A.

D = [1-7, 2-3, 4-2, 0-5, 5-1, 6-9]

D = [-6, -1, 2, -5, 4, -3]