Let T: R^3 --> R^3 be a linear transformation. Let {v1, v2, v3} be a set of linearly dependent vectors in R^3. Show that the set {T(v1), T(v2), T(v3)} is also linearly dependent.

Answer:

In the figure attached, the graph of the function is shown.

1. f(9) ≈ 6 means that at t = 9 (year 1977 + 9 = 1986) the cost to produce 1 watt of solar energy was $6

2. f(4) ≈ 25, which means at year 1981 (=1977 + 4) the cost was $25 per watt  

f(3.5) ≈ 28, which means at half of year 1980 (=1977 + 3.5) the cost was $28 per watt  

3. When f(t) = 45, t is equal to 2, which means that the year wass 1979 (= 1977 + 2)

4. From the graph we can compute the following table:

x  |  y

0  |  80

1   |  60

The general exponential decay formula is:

f(x) = a*b^x

where a is the initial value and b si the decay factor. Replacing with data from the table:

f(0) = a*b^0

80  = a

f(1) = a*b^1

60/80 = b

0.75 = b

Answer:

its 40

Step-by-step explanation:

i think

Answer:

D. Observational Study

Explanation:

An observational  study is one in which all the participants are subjected to a common treatment and then compared to people who did not receive the same treatment. This is the case with the students who where subjected to the same treatment; an additional rehearsal session. They are then observed by the professor and compared to those who did not participate in the experiment.  

This is also an example of a cohort observational study. A cohort observational study is one in which all the participants have a common uniting factor. They are made to undergo a treatment and then compared to those who did not receive the treatment. This type of study  is subject to bias because a positive or negative result might be because of other factors not related to the study.

Answer:

Answer: B

Step-by-step explanation:

The number given is 37.62. So, by rounding to the nearest hundredths the number becomes 37.612 and this can be determined by using the rules of rounding off to the nearest hundredths.

Given :

Number - 37.62

The following steps can be used to round off any number to the nearest hundredth:

Step 1 - In the thousandths place value analyze that digit to round off a decimal.

Step 2 - If the value is 5 or more than 5 in the thousandth place then the digit is increased by 1 which is at the hundredth place and in the thousandth place digit and thereafter becomes zero.

Now, the number given is 37.62. So, by rounding to the nearest hundredths the number becomes 37.612.

Therefore, the correct option is B) 37.612.

For more information, refer to the link given below:

https://brainly.com/question/2096984

Answer:

[tex]f(x)=-5x-3[/tex].

Step-by-step explanation:

From the given machine diagram it is clear that:

[tex]f(x)=-8[/tex] at [tex]x=1[/tex]

[tex]f(x)=-13[/tex] at [tex]x=2[/tex]

[tex]f(x)=-18[/tex] at [tex]x=3[/tex]

It is clear that the value of f(x) decreasing by 5 when the value of x is increasing by 1.

Since the function changing at a constant rate, therefore it represents a linear function.

If a linear function passing through two points, then the equation of line is

[tex]y-y_1=\dfrac{y_2-y_1}{x_2-x_1}(x-x_1)[/tex]

The given linear function passes through (1,-8) and (2,-13), therefore the linear equation is

[tex]y-(-8)=\dfrac{-13-(-8)}{2-1}(x-1)[/tex]

[tex]y+8=\dfrac{-5}{1}(x-1)[/tex]

[tex]y+8=-5(x-1)[/tex]

[tex]y=-5x+5-8[/tex]

[tex]y=-5x-3[/tex]

So, the required function is [tex]f(x)=-5x-3[/tex].

Answer:

  [tex]\left[\begin{array}{cc}63&38\\49&28\end{array}\right][/tex]

Step-by-step explanation:

  [tex]\left[\begin{array}{cc}1&8\\0&7\end{array}\right]\left[\begin{array}{cc}7&6\\7&4\end{array}\right]=\left[\begin{array}{cc}(1)(7)+(8)(7)&(1)(6)+(8)(4)\\(0)(7)+(7)(7)&(0)(6)+(7)(4)\end{array}\right]\\\\=\left[\begin{array}{cc}63&38\\49&28\end{array}\right][/tex]

Each element of the product matrix is the dot product of the corresponding row in the left matrix and the corresponding column in the right matrix.

For example, the element at row 2, column 1 of the product is [0 7]·[7, 7], the dot product of row 2 of the left matrix with column 1 of the right matrix.

_____

Many calculators, spreadsheets, and web sites can do this tedious math for you.

Answer:

The area of the triangle is [tex]A=6 \:units^2[/tex].

Step-by-step explanation:

The area A of a triangle is given by the formula [tex]A=\frac{1}{2} bh[/tex] where b is the base and h is the height of the triangle.

From the graph, we can see that the base is 3 units and the height is 4 units. Therefore, the area of the triangle is

[tex]A=\frac{1}{2} \cdot3\cdot 4=\frac{12}{2}=6 \:units^2[/tex]

Answer:

A square is always a rhombus.

Explanation:

A square has 4 sides of equal length.

Answer:

Answer:

V = 216 cm^3

Step-by-step explanation:

The volume of a cube is given by

V = s^3 where s is the side length

V = (6)^3

V = 216 cm^3

Answer:216 cm^3

Step-by-step explanation:

In cube, the length of all sides are equal

length of side=6cm

Volume of cube=length x length x length

Volume of cube=6 x 6 x 6

Volume of cube=216

Volume of cube=216 cm^3

Answer:

For 0 correct answer [tex]^4c_0p^0q^{4-0}[/tex]

For 1 correct answer [tex]^4c_1p^1q^{4-1}[/tex]

For 2 correct answer [tex]^4c_2p^0q^{4-2}[/tex]

For 3 correct answer [tex]^4c_3p^1q^{4-3}[/tex]

For 4 correct answer [tex]^4c_4p^1q^{4-4}[/tex]

Step-by-step explanation:

It is given that there are 4 questions n = 4

Number of choices is 4

So probability of getting correct answer [tex]=\frac{1}{4}[/tex]

Probability of getting incorrect answer [tex]=1-\frac{1}{4}=\frac{3}{4}[/tex]

Probability distribution is given by [tex]^nc_rp^rq^{n-r}[/tex]

Therefore probability distribution of 0 correct answer

[tex]^4c_0p^0q^{4-0}[/tex]

Therefore probability distribution of 1 correct answer

[tex]^4c_1p^1q^{4-1}[/tex]

Therefore probability distribution of 2 correct answer

[tex]^4c_2p^0q^{4-2}[/tex]

Therefore probability distribution of 3 correct answer.

[tex]^4c_3p^1q^{4-3}[/tex]

Therefore probability distribution of 4 correct answer.

[tex]^4c_4p^1q^{4-4}[/tex]

The answer is 4.55

When you divide 5 by 11 you will get  0.45454545454 than when you multiply these numbers by 10 you will get 4.54545454545 and then the rounded answer is 4.55.

Answer: 4.54

Step-by-step explanation:

Answer:

The problem is clearly solved in the attachment

Answer:

Inverse of f(x)

               [tex]f^{l} (x) = \frac{8 x}{3-x}[/tex]

Step-by-step explanation:

Explanation:-

Step(i):-

Given the function

                        [tex]f(x) = \frac{3 x}{8+x}[/tex]

Given function is one-one and onto function

Hence f(x) is bijection function

                   [tex]y = f(x) = \frac{3 x}{8+x}[/tex]

now cross multiplication, we get

            ( 8+x)y = 3 x

             8 y + x y = 3 x

             8 y = 3 x - x y

taking Common 'x' we get

            x (3 - y) = 8 y

                   [tex]x = \frac{8 y}{3-y}[/tex]

Step(ii):-

The inverse function

                 [tex]x = \frac{8 y}{3-y} = f^{l}(y)[/tex]

The inverse function of x

                  [tex]f^{l}(x) = \frac{8 x}{3-x}[/tex]

Final answer:-

Inverse of f(x)

               [tex]f^{l} (x) = \frac{8 x}{3-x}[/tex]

Answer: 28

Step-by-step explanation: see prev. explanation

The absolute deviation of 5 from the mean of this data set is 28.

Absolute deviation is "the distance between each data point to the mean".

According to the question,

The data set is 26, 12, 35, 28, 14

Average of the data set = [tex]\frac{sum of the data value }{Total number of observation}[/tex]

= [tex]\frac{26+12+35+28+14}{5}[/tex]

= [tex]\frac{115}{5}[/tex]

= 23.

Thus, the average of the data set is 23.

In order to find absolute deviation of 5 subtract each data point from the mean.

26 - 23 = |3| = 3

12 - 23  = |-11| = 11

35 - 23 = |12| = 12

28 - 23 = |5| =  5

14 - 23  = |-9| = 9.

Hence, the absolute deviation of 5 is from the mean of the data set is 28.

Learn more about absolute deviation here

https://brainly.com/question/4364130

#SPJ2

Answer:

[tex]t=\frac{(43.5 -40.1)-(0)}{3.678\sqrt{\frac{1}{20}+\frac{1}{20}}}=2.923[/tex]

The degrees of freedom are

[tex]df=20+20-2=38[/tex]

And the p value is given by:

[tex]p_v =2*P(t_{38}>2.923) =0.0058[/tex]

Since the p value for this cae is lower than the significance level of 0.05 we have enough evidence to reject the null hypothesis and we can conclude that the true means for this case are significantly different

Step-by-step explanation:

When we have two independent samples from two normal distributions with equal variances we are assuming that  

[tex]\sigma^2_1 =\sigma^2_2 =\sigma^2[/tex]

And the statistic is given by this formula:

[tex]t=\frac{(\bar X_1 -\bar X_2)-(\mu_{1}-\mu_2)}{S_p\sqrt{\frac{1}{n_1}+\frac{1}{n_2}}}[/tex]

Where t follows a t distribution with [tex]n_1+n_2 -2[/tex] degrees of freedom and the pooled variance [tex]S^2_p[/tex] is given by this formula:

[tex]S^2_p =\frac{(n_1-1)S^2_1 +(n_2 -1)S^2_2}{n_1 +n_2 -2}[/tex]

The system of hypothesis on this case are:

Null hypothesis: [tex]\mu_1 = \mu_2[/tex]

Alternative hypothesis: [tex]\mu_1 \neq \mu_2[/tex]

We have the following data given:

[tex]n_1 =20[/tex] represent the sample size for group 1

[tex]n_2 =20[/tex] represent the sample size for group 2

[tex]\bar X_1 =43.5[/tex] represent the sample mean for the group 1

[tex]\bar X_2 =40.1[/tex] represent the sample mean for the group 2

[tex]s_1=4.1[/tex] represent the sample standard deviation for group 1

[tex]s_2=3.2[/tex] represent the sample standard deviation for group 2

First we can begin finding the pooled variance:

[tex]\S^2_p =\frac{(20-1)(4.1)^2 +(20 -1)(3.2)^2}{20 +20 -2}=13.525[/tex]

And the deviation would be just the square root of the variance:

[tex]S_p=3.678[/tex]

The statistic is givne by:

[tex]t=\frac{(43.5 -40.1)-(0)}{3.678\sqrt{\frac{1}{20}+\frac{1}{20}}}=2.923[/tex]

The degrees of freedom are

[tex]df=20+20-2=38[/tex]

And the p value is given by:

[tex]p_v =2*P(t_{38}>2.923) =0.0058[/tex]

Since the p value for this cae is lower than the significance level of 0.05 we have enough evidence to reject the null hypothesis and we can conclude that the true means for this case are significantly different

Using the t-distribution, as we have the standard deviation for the sample, it is found that the researcher can conclude that there is a difference between the population means at the 0.05 significance level.

At the null hypothesis, it is tested if there is no difference, that is:

[tex]H_0: \mu_1 - \mu_2 = 0[/tex]

At the alternative hypothesis, it is tested if there is a difference, that is:

[tex]H_a: \mu_1 - \mu_2 \neq 0[/tex]

For each sample, we have that they are given by

[tex]\mu_1 = 43.5, s_1 = \frac{4.1}{\sqrt{20}} = 0.9168[/tex]

[tex]\mu_2 = 40.2, s_2 = \frac{3.2}{\sqrt{20}} = 0.7155[/tex]

Hence, for the distribution of differences, the mean and the standard error are given by:

[tex]\overline{x} = \mu_1 - \mu_2 = 43.5 - 40.2 = 3.3[/tex]

[tex]s = \sqrt{s_1^2 + s_2^2} = \sqrt{0.9168^2 + 0.7155^2} = 1.163[/tex]

It is given by:

[tex]t = \frac{\overline{x} - \mu}{s}[/tex]

In which [tex]\mu = 0[/tex] is the value tested at the null hypothesis, hence:

[tex]t = \frac{\overline{x} - \mu}{s}[/tex]

[tex]t = \frac{3.3 - 0}{1.163}[/tex]

[tex]t = 2.84[/tex]

Considering a two-tailed test, as we are testing if the mean is different of a value, with a significance level of 0.05 and 20 + 20 - 2 = 38 df, the critical value is of [tex]|z^{\ast}| = 2.0244[/tex].

Since the absolute value of the test statistic is greater than the critical value, it is found that the researcher can conclude that there is a difference between the population means at the 0.05 significance level.

More can be learned about the t-distribution at https://brainly.com/question/16313918

Answer: .0039

Step-by-step explanation:

Answer:

1.

Step-by-step explanation:

∛1= 1.

It can also be seen as:

1×1×1= 1.

Answer:

The mode is 21.

Step-by-step explanation:

Mode is a number than appears most frequently in a set of numbers.

Answer:

[tex]21[/tex]

Step-by-step explanation:

The Most frequently number that appears in a set of numbers is called as mode.

21 , 7 , 19 , 21 , 60 , 21 , 19

Now here we can clearly see that 21 is the most frequent number that appears in the text.

hope this helps

brainliest appreciated

good luck! have a nice day!

Answer:

Step-by-step explanation: answer is 480 cubic feet. Just do 8 x 6 x 10.

Answer:

3 times at 3

Step-by-step explanation:

Answer:

It's popular and hard

Step-by-step explanation:

Answer:

B

Step-by-step explanation:

Answer:

B

Step-by-step explanation:

B because first you need to read the problem and understand the information.

Answer:

maybe show me a picture of what u want me to help u with and then Ill answer it

Answer: 5/13

Step-by-step explanation:

Answer:

5/13 is in simplest form, because it cannot be reduced any further.

Step-by-step explanation: 4/20 can be reduced to 1/5, 6/9 to 1/3, and 14/21 can be reduced to 2/3

Answer:

x=0

Step-by-step explanation:

<BCA is half of arc BA or half of 120 which is 60.

do the math, and then x has to be 0 degrees

Answer: [tex]3(3-4x+2y)[/tex]

Step-by-step explanation:

[tex]9-12x+6y[/tex]

[tex]3(3-4x+2y)[/tex]

Answer:

74 and 27

Step-by-step explanation:

let x and y be the numbers

x + y =101........eqn 1

x - y = 47.......eqn 2

solve simultaneously

from equation 2, make x the subject

x= 47 + y........eqn 3

put eqn 3 into eqn 1

(47+y) + y = 101

47 + 2y = 101

       2y= 101 - 47

       2y=54

         y= 54/2

         y= 27

put y=27 into eqn 3

x = 47 + 27

x = 74

Answer:I believe it would be 5/12

Step-by-step explanation:

You add all of them up then since it's 5 grapes and in total there is 12 fruit snacks. It should be 5 grapes of 12 fruit snacks in the bag.

Answer:

The number: 13,226

Step-by-step explanation:

1. The smallest 5-digit number possibile is: 10,000

2. The smallest 5-digit number being odd should be: 10,001

3. All factors of 6 are {1, 2, 3, 6} so that the smallest possible way to arrange these numbers would be: 11,236

4.  Now this number contains 3 prime numbers, 2 being {2 and 3}. If we were to consider another prime number, still being a factor of 6, that would be: 2. That would mean instead of the 1 being the second digit of the value 11,236 it could be 2: 12,236.

5. The digit in the thousands place (2) should be greater than the digit in the tens place (3). Let's swap these digits for now so that condition is satisfied: 13,226. 2 is the only number that has a number greater than it, besides 1, but 1 can't be a digit in the tenth place as it would make a greater 5 digit-number. Thus, provided the conditions are still satisfied, the number 13,226 is the smallest number possible.