In kickboxing, it is found that the force, f, needed to break a board, varies inversely with the length, l, of the board. If it takes 7 pounds of pressure to break a board that is 3 feet long, how long is a board that requires 5 pounds of pressure to break?

Answer:

See below.

Step-by-step explanation:

To find roots of an equation, we use this formula:

[tex]z^{\frac{1}{n}}=r^{\frac{1}{n}}(cos(\frac{\theta}{n}+\frac{2k\pi}{n} )+\mathfrak{i}(sin(\frac{\theta}{n}+\frac{2k\pi}{n})),[/tex] where k = 0, 1, 2, 3... (n = root; equal to n - 1; dependent on the amount of roots needed - 0 is included).

In this case, n = 4.

Therefore, we adjust the polar equation we are given and modify it to be solved for the roots.

Part 2: Solving for root #1

To solve for root #1, make k = 0 and substitute all values into the equation. On the second step, convert the measure in degrees to the measure in radians by multiplying the degrees measurement by [tex]\frac{\pi}{180}[/tex] and simplify.

[tex]z^{\frac{1}{4}}=16^{\frac{1}{4}}(cos(\frac{200}{4}+\frac{2(0)\pi}{4}))+\mathfrak{i}(sin(\frac{200}{4}+\frac{2(0)\pi}{4}))[/tex]

[tex]z^{\frac{1}{4}}=2(cos(\frac{5\pi}{18}+\frac{\pi}{4}))+\mathfrak{i}(sin(\frac{5\pi}{18}+\frac{\pi}{4}))[/tex]

[tex]z^{\frac{1}{4}} = 2(sin(\frac{5\pi}{18}+\frac{\pi}{4}))+\mathfrak{i}(sin(\frac{5\pi}{18}+\frac{\pi}{4}))[/tex]

Root #1:

[tex]\large\boxed{z^\frac{1}{4}=2(cos(\frac{19\pi}{36}))+\mathfrack{i}(sin(\frac{19\pi}{38}))}[/tex]

Part 3: Solving for root #2

To solve for root #2, follow the same simplifying steps above but change k  to k = 1.

[tex]z^{\frac{1}{4}}=16^{\frac{1}{4}}(cos(\frac{200}{4}+\frac{2(1)\pi}{4}))+\mathfrak{i}(sin(\frac{200}{4}+\frac{2(1)\pi}{4}))[/tex]

[tex]z^{\frac{1}{4}}=2(cos(\frac{5\pi}{18}+\frac{2\pi}{4}))+\mathfrak{i}(sin(\frac{5\pi}{18}+\frac{2\pi}{4}))\\[/tex]

[tex]z^{\frac{1}{4}}=2(cos(\frac{5\pi}{18}+\frac{\pi}{2}))+\mathfrak{i}(sin(\frac{5\pi}{18}+\frac{\pi}{2}))\\[/tex]

Root #2:

[tex]\large\boxed{z^{\frac{1}{4}}=2(cos(\frac{7\pi}{9}))+\mathfrak{i}(sin(\frac{7\pi}{9}))}[/tex]

Part 4: Solving for root #3

To solve for root #3, follow the same simplifying steps above but change k to k = 2.

[tex]z^{\frac{1}{4}}=16^{\frac{1}{4}}(cos(\frac{200}{4}+\frac{2(2)\pi}{4}))+\mathfrak{i}(sin(\frac{200}{4}+\frac{2(2)\pi}{4}))[/tex]

[tex]z^{\frac{1}{4}}=2(cos(\frac{5\pi}{18}+\frac{4\pi}{4}))+\mathfrak{i}(sin(\frac{5\pi}{18}+\frac{4\pi}{4}))\\[/tex]

[tex]z^{\frac{1}{4}}=2(cos(\frac{5\pi}{18}+\pi))+\mathfrak{i}(sin(\frac{5\pi}{18}+\pi))\\[/tex]

Root #3:

[tex]\large\boxed{z^{\frac{1}{4}}=2(cos(\frac{23\pi}{18}))+\mathfrak{i}(sin(\frac{23\pi}{18}))}[/tex]

Part 4: Solving for root #4

To solve for root #4, follow the same simplifying steps above but change k to k = 3.

[tex]z^{\frac{1}{4}}=16^{\frac{1}{4}}(cos(\frac{200}{4}+\frac{2(3)\pi}{4}))+\mathfrak{i}(sin(\frac{200}{4}+\frac{2(3)\pi}{4}))[/tex]

[tex]z^{\frac{1}{4}}=2(cos(\frac{5\pi}{18}+\frac{6\pi}{4}))+\mathfrak{i}(sin(\frac{5\pi}{18}+\frac{6\pi}{4}))\\[/tex]

[tex]z^{\frac{1}{4}}=2(cos(\frac{5\pi}{18}+\frac{3\pi}{2}))+\mathfrak{i}(sin(\frac{5\pi}{18}+\frac{3\pi}{2}))\\[/tex]

Root #4:

[tex]\large\boxed{z^{\frac{1}{4}}=2(cos(\frac{16\pi}{9}))+\mathfrak{i}(sin(\frac{16\pi}{19}))}[/tex]

The fourth roots of 16(cos 200° + i(sin 200°) are listed above.

You can put [tex]n[/tex] different elements in order in [tex]n![/tex] different ways.

So, you can visit 12 different cities in [tex]12!=479001600[/tex] different ways.

Answer: 479,001,600

Step-by-step explanation:

There are 12 ways to go to the first place, 11 for the second, ten for the third, and so on. So 12! Means 12x11x10x9x8x7x6x5x4x3x2x1.

Answer:

19,691

Step-by-step explanation:

Answer:

2813 x 7 = 19691

Hope this helps!

Answer:

combined like terms and then follow  the order of operations.

Step-by-step explanation:

Answer:

7.5 cm²

Step-by-step explanation:

Dimensions of the large ∆:

[tex] base (b) = 3cm, height (h) = 9cm [/tex]

[tex] Area = 0.5*b*h = 0.5*3*9 = 13.5 cm^2 [/tex]

Dimensions of the small ∆:

[tex] base (b) = 2cm, height (h) = 6cm [/tex]

[tex] Area = 0.5*b*h = 0.5*2*6 = 6 cm^2 [/tex]

Difference between the area of the large and the small ∆ = 13.5 - 6 = 7.5 cm²

Answer:

See below.

Step-by-step explanation:

First, recall the meanings of the domain and range.

The domain is the span of x-values covered by the graph.

And the range is the span of y-values covered by the graph.

1)

So, we have here an absolute value function.

As we can see, the domain of the function is all real numbers because the graph stretches left and right infinitely. Therefore, the domain of the function is:

[tex]\{x|x\in\textbb{R}\}[/tex]

(You are correct!)

For the range, notice how the function stops at y=7. The highest point of the function is (-2,7). There graph doesn't and won't ever reach above y=7. Therefore, the range of the graph is all values less than or equal to 7. In set notation, this is:

[tex]\{y|y\leq 7\}[/tex]

2)

We have here an ellipse.

First, for the domain. We can see the the span of x-values covered by the ellipse is from x=-4 to x=6. In other words, the domain is all values in between these two numbers and including them. Therefore, we can write it as such:

[tex]-4\leq x\leq 6[/tex]

So x is all numbers greater than or equal to -4 but less than or equal to 6. This describes the span of x-values. In set notation, this is:

[tex]\{x|-4\leq x\leq 6\}[/tex]

For the range, we can see that the span of x values covered by the ellipse is from y=-5 to y=1. Just like the domain, we can write it like this:

[tex]-5\leq y\leq 1[/tex]

This represents all the y-values between -5 and 1, including -5 and 1.

In set notation, thi is:

[tex]\{y|-5\leq y\leq 1\}[/tex]

Answer: 1.5 less than 15 is divided by a number d.

Step-by-step explanation:

Answer:

Your answer is here.Enjoy dude

Answer:

12.56 unit²

Step-by-step explanation:

The form of the circle is:

Let's bring the given to the form of a circle as above:

As per the form, we got r² = 2², so the radius of circle is 2 units.

The area of circle:

Answer:

The events are independent.

The probability of showing heads on both toss is equal to 1/2

Step-by-step explanation:

The sample space for this experiment consists of 2⁴= 16 sample points, as each toss can result in two outcomes we assume that the events are equally likely.

Two events are independent in the sample space if the probability of one event occurs, is not affected by whether the other event has or has not occurred.

In general the k events are defined to be mutually independent if and only if the probability of the intersection of  any 2,3,--------, k  equals the product of their respective probabilities.

P (A∩B) = P(A). P(B)

P (A∩B)   = 1/2. 1/2= 1/4

                                                                  Head          Tail

 P(E1)= 1/2  ----------          Coin 1               H,H              T,H

                                                                1/4                  1/4

  P(E2)= 1/2  ---------------  Coin 2             H, H               H,T

                                                                      1/4           1/4

So the events are independent.

The probability of showing heads on both toss is equal to 1/2

The sample space for this experiment consists of 2⁴= 16 sample points, out of which eight will have heads on both toss.

Or in other words ( 1/4* 1/4) = 2/4 = 1/2

Answer:

-59

Step-by-step explanation:

x+41=-18

x= -18-41

x = -59

Answer:

[tex] {x}^{2} + 5x + 10[/tex]

Answer:

[tex]\large \boxed{x^2 +5x+10}[/tex]

Step-by-step explanation:

A polynomial is an expression that has variables, coefficients, and constants.

An example of a polynomial can be x² - 6x + 2.

Answer:

The steps 1-7 have been explained

Step-by-step explanation:

The steps are;

1) We will verify that the population standard deviations are known and that the population is normally distributed which means the sample size must be a minimum of 30.

2) We will state the null and alternative hypothesis

3) We will determine the critical values from the relevant tables

4) From the critical values gotten, we will determine it's corresponding region where it can be rejected.

5)We will calculate the value of the test statistic from the formula;

z = [(x1' - x2') - (μ1 - μ2)]/√[((σ1)²/n1) + ((σ2)²/n2)]

6) If the value of the test statistic gotten from step 5 above falls in the region of rejection noted in step 4,then we will reject the null hypothesis

7) After rejection of the null hypothesis, we will now give a decision/conclusion on the claim.

Answer:

1. Jan checks the weather.  It is 27 degrees outside.  Jan did chores for two hours.  After Jan was done, she checked the weather again.  The temperature had decreased 11 degrees.

2. (See screen shot below.)

Step-by-step explanation:

1.  It doesn't have to be as complicated as I made it.  You can just say that the weather started out with 27 degrees, and decreased later on.  Remember, decreased means subtracted and 27+(-11) is the same as 27-11 because when a + and - are together - always wins.  So no.1 wants you to say something got subtracted.

2. On the number line, make a dot at 29 because it said it was 29 degrees.  Then drag the dot at the number 29 to 13 because it said it decreased 16, so it is 19 minus 16 which is 13.

You would type in

32^(6/5)

Or you could type in

32^(1.2)

since 6/5 = 1.2

Either way, the final result is 64

Answer: There will 486 bacteria in 31 hours.

Step-by-step explanation:

The population decay in bacteria is exponential.

Exponential function : [tex]y=Ab^x[/tex], where A = initial population, b multiplication decay factor, t= time:

As per given:

Initial population: [tex]A=120,000[/tex]

After 36 hours, population = [tex]120000(b^{36})=200[/tex]

Divide both sides by 120,000 we get

[tex]b^{36}= 0.00167[/tex]

Taking natural log on both sides , we get

[tex]36\ln b=\ln 0.00167\\\\\Rightarrow\ b=e^{\left(\frac{\ln0.00167}{36}\right)}=0.83724629\approx0.8372[/tex]

At x= 31,

[tex]y=120000(0.8372)^{31}=120000\times0.00405234\approx486[/tex]

Hence, there will 486 bacteria in 31 hours.

Answer:

x = 6

Step-by-step explanation:

∠ DBC + ∠ ABC = ∠ ABD , substitute values

5x - 4 + 8x - 3 = 79

13x + 1 = 79 ( subtract 1 from both sides )

13x = 78 ( divide both sides by 13 )

x = 6

Answer:

The correlation of X and Y is 1.006

Step-by-step explanation:

Given

X: 2, 3, 5, 6

Y: 1, 2, 4, 5

n = 4

Required

Determine the correlation of x and y

Start by calculating the mean of x and y

For x

[tex]M_x = \frac{\sum x}{n}[/tex]

[tex]M_x = \frac{2 + 3+5+6}{4}[/tex]

[tex]M_x = \frac{16}{4}[/tex]

[tex]M_x = 4[/tex]

For y

[tex]M_y = \frac{\sum y}{n}[/tex]

[tex]M_y = \frac{1+2+4+5}{4}[/tex]

[tex]M_y = \frac{12}{4}[/tex]

[tex]M_y = 3[/tex]

Next, we determine the standard deviation of both

[tex]S = \sqrt{\frac{\sum (x - Mean)^2}{n - 1}}[/tex]

For x

[tex]S_x = \sqrt{\frac{\sum (x_i - Mx)^2}{n -1}}[/tex]

[tex]S_x = \sqrt{\frac{(2-4)^2 + (3-4)^2 + (5-4)^2 + (6-4)^2}{4 - 1}}[/tex]

[tex]S_x = \sqrt{\frac{-2^2 + (-1^2) + 1^2 + 2^2}{3}}[/tex]

[tex]S_x = \sqrt{\frac{4 + 1 + 1 + 4}{3}}[/tex]

[tex]S_x = \sqrt{\frac{10}{3}}[/tex]

[tex]S_x = \sqrt{3.33}[/tex]

[tex]S_x = 1.82[/tex]

For y

[tex]S_y = \sqrt{\frac{\sum (y_i - My)^2}{n - 1}}[/tex]

[tex]S_y = \sqrt{\frac{(1-3)^2 + (2-3)^2 + (4-3)^2 + (5-3)^2}{4 - 1}}[/tex]

[tex]S_y = \sqrt{\frac{-2^2 + (-1^2) + 1^2 + 2^2}{3}}[/tex]

[tex]S_y = \sqrt{\frac{4 + 1 + 1 + 4}{3}}[/tex]

[tex]S_y = \sqrt{\frac{10}{3}}[/tex]

[tex]S_y = \sqrt{3.33}[/tex]

[tex]S_y = 1.82[/tex]

Find the N pairs as [tex](x-M_x)*(y-M_y)[/tex]

[tex](2 - 4)(1 - 3) = (-2)(-2) = 4[/tex]

[tex](3 - 4)(2 - 3) = (-1)(-1) = 1[/tex]

[tex](5 - 4)(4 - 3) = (1)(1) = 1[/tex]

[tex](6-4)(5-3) = (2)(2) = 4[/tex]

Add up these results;

[tex]N = 4 + 1 + 1 + 4[/tex]

[tex]N = 10[/tex]

Next; Evaluate the following

[tex]\frac{N}{S_x * S_y} * \frac{1}{n-1}[/tex]

[tex]\frac{10}{1.82* 1.82} * \frac{1}{4-1}[/tex]

[tex]\frac{10}{3.3124} * \frac{1}{3}[/tex]

[tex]\frac{10}{9.9372}[/tex]

[tex]1.006[/tex]

Hence, The correlation of X and Y is 1.006

Answer:

The probability that he answered neither of the problems correctly ​is 0.0625.

Step-by-step explanation:

We are given that a student ran out of time on a multiple-choice exam and randomly guess the answers for two problems each problem have four answer choices ABCD and only one correct answer.

Let X = Number of problems correctly ​answered by a student.

The above situation can be represented through binomial distribution;

[tex]P(X=r)=\binom{n}{r}\times p^{r}\times (1-p)^{n-r};x=0,1,2,3,....[/tex]    

where, n = number of trials (samples) taken = 2 problems

           r = number of success = neither of the problems are correct

           p = probability of success which in our question is probability that

                 a student answer correctly, i.e; p = [tex]\frac{1}{4}[/tex] = 0.75.

So, X ~ Binom(n = 2, p = 0.75)

Now, the probability that he answered neither of the problems correctly ​is given by = P(X = 0)

             P(X = 0) = [tex]\binom{2}{0}\times 0.75^{0}\times (1-0.75)^{2-0}[/tex]

                            = [tex]1 \times 1\times 0.25^{2}[/tex]

                            = 0.0625

Answer:

-5 ≤x ≤6

Step-by-step explanation:

The domain is the values that x can take

X goes from -5 and includes -5 to x =6 and includes 6

-5 ≤x ≤6

Answer:

See attached!

Step-by-step explanation:

Answer:

x+10 =2

x = -8

Step-by-step explanation:

plus means add

x+10 =2

Subtract 10 from each side

x+10-10 =2-10

x = -8

Answer:

Last one

Step-by-step explanation:

The function f is:

● f (x)= √(4x+6)

The function g is:

● g(x) = √(4x-6)

Add them together:

● f+g (x)= √(4x+6 )+ √(4x-6)

Answer:

[tex]\large \boxed{{\sqrt{4x+6} + \sqrt{4x-6} }}[/tex]

Step-by-step explanation:

[tex]f(x)=\sqrt{4x+6}[/tex]

[tex]g(x)=\sqrt{4x-6}[/tex]

[tex](f+g)(x)[/tex]

[tex]f(x)+g(x)[/tex]

Add both functions.

[tex](\sqrt{4x+6} )+ (\sqrt{4x-6} )[/tex]

Answer:

The value is [tex]T = \$54200[/tex]

Step-by-step explanation:

From the question we are told that

      The  number of shares is  n  =  400

      The rate  of each share is  [tex]k = 135\frac{1}{2} = 135.5[/tex]

Generally the total price is mathematically represented as

     [tex]T = 400 * 135.5[/tex]

      [tex]T = \$54200[/tex]

Answer:

75 yards long and 90 yards wide.

Step-by-step explanation:

Let's first find the perimeter of the main rectangle:

100x2 + 65x2 =

330

_________________________________________

Next we need to find two numbers that match:

75 and 90

75x2 + 90x2 =

330

_________________________________________

75x90 is 6750 (More Area)

100x60 is 6500 (Less Area)

Answer:

6.034

Step-by-step explanation:

6 is a whole number.

.034 because it is 34 thousandths, not 34 hundredths.

The number of vehicles that drove less than 200, 000 km is 12 vehicles

The bar char represents the distance in thousand of km vehicles drove.

3 vehicle drove for 50 thousand kilometres.

4  vehicle drove for 100 thousand kilometres.

5  vehicle drove for 150 thousand kilometres.

Therefore, the total vehicle that drove for less than 200 thousand kilometres is as follows:

total vehicle that drove for less than 200, thousand km = 3 + 4 + 5 = 12 vehicles

learn more on linear bar chart here: https://brainly.com/question/3101280

#SPJ1

Answer:

2

Step-by-step explanation:

Answer:

the probability of no defects in 10 feet of steel = 0.1353

Step-by-step explanation:

GIven that:

A roll of steel is manufactured on a processing line. The anticipated number of defects in a 10-foot segment of this roll is two.

Let consider β to be the average value for defecting

So;

β = 2

Assuming Y to be the random variable which signifies the anticipated number of defects in a 10-foot segment of this roll.

Thus, y follows a poisson distribution as number of defect is infinite with the average value of β = 2

i.e

[tex]Y \sim P( \beta = 2)[/tex]

the probability mass function can be represented as follows:

[tex]\mathtt{P(y) = \dfrac{e^{- \beta} \ \beta^ \ y}{y!}}[/tex]

where;

y =  0,1,2,3 ...

Hence,  the probability of no defects in 10 feet of steel

y = 0

[tex]\mathtt{P(y =0) = \dfrac{e^{- 2} \ 2^ \ 0}{0!}}[/tex]

[tex]\mathtt{P(y =0) = \dfrac{0.1353 \times 1}{1}}[/tex]

P(y =0) = 0.1353

Answer:

$ 180,000

Step-by-step explanation:

All we are being asked to do in this question is take the simple interest, given a principle value of $100,000, with 8 percent interest each year over a course of 10 years. This is given the simple interest formula P( 1 + rt ).

Simple Interest : P( 1 + rt ),

P = $ 100,000 ; r = 8% ; t = 10 years,

100,000( 1 + 0.08( 10 ) ) = 100,000( 1 + 0.8 ) = 100,000( 1.8 ) = 180,000

Therefore you will have to pay back a total of $ 180,000

Answer:

Step-by-step explanation:

A probability density function (pdf) is used for continuous random variables. That is why p is between 0 and 1 (the two extremes - 0 and 1 - exclusive).

X = 100pth percentile of W

Y = 100(1-p)th percentile of W

Expressing Y as a function of X;

Y = 100(1-p)th = 100th - 100pth

Recall that 100pth is same as X, so substitute;

Y = 100th - X

where 100th = hundredth percentile of W and X = 100pth percentile of W  

Answer:

  17 by 21 inches

Step-by-step explanation:

The perimeter is twice the sum of the dimensions, and the area is their product, so you have ...

  L + W = 38

  LW = 357

__

Solution:

  W(38 -W) = 357 . . . . . substitute for L

  -(W^2 -76W) = 357 . . expand on the left

  -(W^2 -38 +19^2) = 357 -19^2 . . . . complete the square

  (W -19)^2 = 4 . . . . . . . write as a square

  W -19 = ±√4 = ±2 . . . take the square root; next, add 19

  W = 19 ±2 = {17, 21} . . . . if width is one of these, length is the other

The dimensions are 17 by 21 inches.

Answer:

x=16.1

Step-by-step explanation:

open the brackets

-4.5= -0.5x-3.55

Take 3.55 to the other side.

-4.5-3.55 = -8.05

5/10x= -805/100

0.5x= - 8.05 = 16.1